a string. The following types are used:
str String. This is a sequence of alpha characters.
-int Integer. A whole number value, may be negative.
+int Integer. A whole number value, can be negative. If prefixed with
+ 0x, the integer is assumed to be of base 16 (hexidecimal).
siint SI integer. A whole number value, which may contain a postfix
describing the base of the number. Accepted postfixes are k/m/g,
meaning kilo, mega, and giga. So if you want to specify 4096,
opendir=str Tell fio to recursively add any file it can find in this
directory and down the file system tree.
+lockfile=str Fio defaults to not doing any locking files before it does
+ IO to them. If a file or file descriptor is shared, fio
+ can serialize IO to that file to make the end result
+ consistent. This is usual for emulating real workloads that
+ share files. The lock modes are:
+
+ none No locking. The default.
+ exclusive Only one thread/process may do IO,
+ excluding all others.
+ readwrite Read-write locking on the file. Many
+ readers may access the file at the
+ same time, but writes get exclusive
+ access.
+
+ The option may be post-fixed with a lock batch number. If
+ set, then each thread/process may do that amount of IOs to
+ the file before giving up the lock. Since lock acqusition is
+ expensive, batching the lock/unlocks will speed up IO.
+
readwrite=str
rw=str Type of io pattern. Accepted values are:
If set, fio will use POSIX_FADV_SEQUENTIAL for sequential
IO and POSIX_FADV_RANDOM for random IO.
-size=siint The total size of file io for this job. This may describe
- the size of the single file the job uses, or it may be
- divided between the number of files in the job. If the
- file already exists, the file size will be adjusted to this
- size if larger than the current file size. If this parameter
- is not given and the file exists, the file size will be used.
+size=siint The total size of file io for this job. Fio will run until
+ this many bytes has been transferred, unless runtime is
+ limited by other options (such as 'runtime', for instance).
+ Unless specific nr_files and filesize options are given,
+ fio will divide this size between the available files
+ specified by the job.
filesize=siint Individual file sizes. May be a range, in which case fio
will select sizes for files at random within the given range
and limited to 'size' in total (if that is given). If not
given, each created file is the same size.
+fill_device=bool Sets size to something really large and waits for ENOSPC (no
+ space left on device) as the terminating condition. Only makes
+ sense with sequential write.
+
blocksize=siint
bs=siint The block size used for the io units. Defaults to 4k. Values
can be given for both read and writes. If a single siint is
writes, however a second range can be given after a comma.
See bs=.
+bssplit=str Sometimes you want even finer grained control of the
+ block sizes issued, not just an even split between them.
+ This option allows you to weight various block sizes,
+ so that you are able to define a specific amount of
+ block sizes issued. The format for this option is:
+
+ bssplit=blocksize/percentage:blocksize/percentage
+
+ for as many block sizes as needed. So if you want to define
+ a workload that has 50% 64k blocks, 10% 4k blocks, and
+ 40% 32k blocks, you would write:
+
+ bssplit=4k/10:64k/50:32k/40
+
+ Ordering does not matter. If the percentage is left blank,
+ fio will fill in the remaining values evenly. So a bssplit
+ option like this one:
+
+ bssplit=4k/50:1k/:32k/
+
+ would have 50% 4k ios, and 25% 1k and 32k ios. The percentages
+ always add up to 100, if bssplit is given a range that adds
+ up to more, it will error out.
+
blocksize_unaligned
bs_unaligned If this option is given, any byte size value within bsrange
may be used as a block range. This typically wont work with
sync Basic read(2) or write(2) io. lseek(2) is
used to position the io location.
+ psync Basic pread(2) or pwrite(2) io.
+
+ vsync Basic readv(2) or writev(2) IO.
+
libaio Linux native asynchronous io.
posixaio glibc posix asynchronous io.
or receive, if the latter only the port
argument is used.
- cpu Doesn't transfer any data, but burns CPU
+ netsplice Like net, but uses splice/vmsplice to
+ map data and send/receive.
+
+ cpuio Doesn't transfer any data, but burns CPU
cycles according to the cpuload= and
cpucycle= options. Setting cpuload=85
will cause that job to do nothing but burn
- 85% of the CPU.
+ 85% of the CPU. In case of SMP machines,
+ use numjobs=<no_of_cpu> to get desired CPU
+ usage, as the cpuload only loads a single
+ CPU at the desired rate.
guasi The GUASI IO engine is the Generic Userspace
Asyncronous Syscall Interface approach
concurrency.
iodepth_batch=int This defines how many pieces of IO to submit at once.
- It defaults to the same as iodepth, but can be set lower
- if one so desires.
+ It defaults to 1 which means that we submit each IO
+ as soon as it is available, but can be raised to submit
+ bigger batches of IO at the time.
iodepth_low=int The low water mark indicating when to start filling
the queue again. Defaults to the same as iodepth, meaning
new random offset without looking at past io history. This
means that some blocks may not be read or written, and that
some blocks may be read/written more than once. This option
- is mutually exclusive with verify= for that reason.
+ is mutually exclusive with verify= for that reason, since
+ fio doesn't track potential block rewrites which may alter
+ the calculated checksum for that block.
nice=int Run the job with the given nice value. See man nice(2).
of milliseconds.
cpumask=int Set the CPU affinity of this job. The parameter given is a
- bitmask of allowed CPU's the job may run on. See man
- sched_setaffinity(2).
+ bitmask of allowed CPU's the job may run on. So if you want
+ the allowed CPUs to be 1 and 5, you would pass the decimal
+ value of (1 << 1 | 1 << 5), or 34. See man
+ sched_setaffinity(2). This may not work on all supported
+ operating systems or kernel versions.
+
+cpus_allowed=str Controls the same options as cpumask, but it allows a text
+ setting of the permitted CPUs instead. So to use CPUs 1 and
+ 5, you would specify cpus_allowed=1,5.
startdelay=int Start this job the specified number of seconds after fio
has started. Only useful if the job file contains several
to repeat the same workload a given number of times. Defaults
to 1.
+do_verify=bool Run the verify phase after a write phase. Only makes sense if
+ verify is set. Defaults to 1.
+
verify=str If writing to a file, fio can verify the file contents
after each iteration of the job. The allowed values are:
md5 Use an md5 sum of the data area and store
it in the header of each block.
+ crc64 Use an experimental crc64 sum of the data
+ area and store it in the header of each
+ block.
+
crc32 Use a crc32 sum of the data area and store
it in the header of each block.
+ crc16 Use a crc16 sum of the data area and store
+ it in the header of each block.
+
+ crc7 Use a crc7 sum of the data area and store
+ it in the header of each block.
+
+ sha512 Use sha512 as the checksum function.
+
+ sha256 Use sha256 as the checksum function.
+
+ meta Write extra information about each io
+ (timestamp, block number etc.). The block
+ number is verified.
+
null Only pretend to verify. Useful for testing
internals with ioengine=null, not for much
else.
can ignore this option unless doing huge amounts of really
fast IO where the red-black tree sorting CPU time becomes
significant.
+
+verify_offset=siint Swap the verification header with data somewhere else
+ in the block before writing. Its swapped back before
+ verifying.
+
+verify_interval=siint Write the verification header at a finer granularity
+ than the blocksize. It will be written for chunks the
+ size of header_interval. blocksize should divide this
+ evenly.
+
+verify_pattern=int If set, fio will fill the io buffers with this
+ pattern. Fio defaults to filling with totally random
+ bytes, but sometimes it's interesting to fill with a known
+ pattern for io verification purposes. Depending on the
+ width of the pattern, fio will fill 1/2/3/4 bytes of the
+ buffer at the time. The verify_pattern cannot be larger than
+ a 32-bit quantity.
+
+verify_fatal=bool Normally fio will keep checking the entire contents
+ before quitting on a block verification failure. If this
+ option is set, fio will exit the job on the first observed
+ failure.
stonewall Wait for preceeding jobs in the job file to exit, before
starting this one. Can be used to insert serialization
_ Thread reaped.
The other values are fairly self explanatory - number of threads
-currently running and doing io, rate of io since last check, and the estimated
-completion percentage and time for the running group. It's impossible to
-estimate runtime of the following groups (if any).
+currently running and doing io, rate of io since last check (read speed
+listed first, then write speed), and the estimated completion percentage
+and time for the running group. It's impossible to estimate runtime of
+the following groups (if any).
When fio is done (or interrupted by ctrl-c), it will show the data for
each thread, group of threads, and disks in that order. For each data
slat (msec): min= 0, max= 136, avg= 0.03, stdev= 1.92
clat (msec): min= 0, max= 631, avg=48.50, stdev=86.82
bw (KiB/s) : min= 0, max= 1196, per=51.00%, avg=664.02, stdev=681.68
- cpu : usr=1.49%, sys=0.25%, ctx=7969
+ cpu : usr=1.49%, sys=0.25%, ctx=7969, majf=0, minf=17
IO depths : 1=0.1%, 2=0.3%, 4=0.5%, 8=99.0%, 16=0.0%, 32=0.0%, >32=0.0%
issued r/w: total=0/32768, short=0/0
lat (msec): 2=1.6%, 4=0.0%, 10=3.2%, 20=12.8%, 50=38.4%, 100=24.8%,
slat= Submission latency (avg being the average, stdev being the
standard deviation). This is the time it took to submit
the io. For sync io, the slat is really the completion
- latency, since queue/complete is one operation there.
+ latency, since queue/complete is one operation there. This
+ value can be in miliseconds or microseconds, fio will choose
+ the most appropriate base and print that. In the example
+ above, miliseconds is the best scale.
clat= Completion latency. Same names as slat, this denotes the
time from submission to completion of the io pieces. For
sync io, clat will usually be equal (or very close) to 0,
only really useful if the threads in this group are on the
same disk, since they are then competing for disk access.
cpu= CPU usage. User and system time, along with the number
- of context switches this thread went through.
+ of context switches this thread went through, usage of
+ system and user time, and finally the number of major
+ and minor page faults.
IO depths= The distribution of io depths over the job life time. The
numbers are divided into powers of 2, so for example the
16= entries includes depths up to that value but higher
Submission latency: min, max, mean, deviation
Completion latency: min, max, mean, deviation
Bw: min, max, aggregate percentage of total, mean, deviation
- CPU usage: user, system, context switches
+ CPU usage: user, system, context switches, major faults, minor faults
IO depths: <=1, 2, 4, 8, 16, 32, >=64
IO latencies: <=2, 4, 10, 20, 50, 100, 250, 500, 750, 1000, >=2000
Text description
projects / fio.git / blobdiff