can specify a number of files by separating the names with a
':' colon. So if you wanted a job to open /dev/sda and /dev/sdb
as the two working files, you would use
- filename=/dev/sda:/dev/sdb. If the wanted filename does need to
- include a colon, then escape that with a '\' character. For
- instance, if the filename is "/dev/dsk/foo@3,0:c", then you would
- use filename="/dev/dsk/foo@3,0\:c". '-' is a reserved name,
- meaning stdin or stdout. Which of the two depends on the read/write
- direction set.
+ filename=/dev/sda:/dev/sdb. On Windows, disk devices are accessed
+ as /dev/sda for the first device (i.e. \Device\HardDisk0\Partition0,
+ /dev/sda1 for the first partition on the first disk etc. If the
+ wanted filename does need to include a colon, then escape that with
+ a '\' character. For instance, if the filename is
+ "/dev/dsk/foo@3,0:c", then you would use filename="/dev/dsk/foo@3,0\:c".
+ '-' is a reserved name, meaning stdin or stdout. Which of the
+ two depends on the read/write direction set.
opendir=str Tell fio to recursively add any file it can find in this
directory and down the file system tree.
For the mixed io types, the default is to split them 50/50.
For certain types of io the result may still be skewed a bit,
since the speed may be different. It is possible to specify
- a number of IO's to do before getting a new offset - this
- is only useful for random IO, where fio would normally
- generate a new random offset for every IO. If you append
- eg 8 to randread, you would get a new random offset for
+ a number of IO's to do before getting a new offset, this is
+ one by appending a ':<nr>' to the end of the string given.
+ For a random read, it would look like 'rw=randread:8' for
+ passing in an offset modifier with a value of 8. See the
+ 'rw_sequencer' option.
+
+rw_sequencer=str If an offset modifier is given by appending a number to
+ the rw=<str> line, then this option controls how that
+ number modifies the IO offset being generated. Accepted
+ values are:
+
+ sequential Generate sequential offset
+ identical Generate the same offset
+
+ 'sequential' is only useful for random IO, where fio would
+ normally generate a new random offset for every IO. If you
+ append eg 8 to randread, you would get a new random offset for
every 8 IO's. The result would be a seek for only every 8
IO's, instead of for every IO. Use rw=randread:8 to specify
- that.
+ that. As sequential IO is already sequential, setting
+ 'sequential' for that would not result in any differences.
+ 'identical' behaves in a similar fashion, except it sends
+ the same offset 8 number of times before generating a new
+ offset.
kb_base=int The base unit for a kilobyte. The defacto base is 2^10, 1024.
Storage manufacturers like to use 10^3 or 1000 as a base
limited by other options (such as 'runtime', for instance).
Unless specific nrfiles and filesize options are given,
fio will divide this size between the available files
- specified by the job.
+ specified by the job. If not set, fio will use the full
+ size of the given files or devices. If the the files
+ do not exist, size must be given.
filesize=int Individual file sizes. May be a range, in which case fio
will select sizes for files at random within the given range
solarisaio Solaris native asynchronous io.
+ windowsaio Windows native asynchronous io.
+
mmap File is memory mapped and data copied
to/from using memcpy(3).
iodepth=int This defines how many io units to keep in flight against
the file. The default is 1 for each file defined in this
job, can be overridden with a larger value for higher
- concurrency.
+ concurrency. Note that increasing iodepth beyond 1 will not
+ affect synchronous ioengines (except for small degress when
+ verify_async is in use). Even async engines my impose OS
+ restrictions causing the desired depth not to be achieved.
+ This may happen on Linux when using libaio and not setting
+ direct=1, since buffered IO is not async on that OS. Keep an
+ eye on the IO depth distribution in the fio output to verify
+ that the achieved depth is as expected. Default: 1.
iodepth_batch_submit=int
iodepth_batch=int This defines how many pieces of IO to submit at once.
associated with an IO block in memory, so for large
verify workloads, quite a bit of memory would be used up
holding this meta data. If this option is enabled, fio
+ will write only N blocks before verifying these blocks.
+
will verify the previously written blocks before continuing
to write new ones.
verify_backlog_batch=int Control how many blocks fio will verify
if verify_backlog is set. If not set, will default to
the value of verify_backlog (meaning the entire queue
- is read back and verified).
+ is read back and verified). If verify_backlog_batch is
+ less than verify_backlog then not all blocks will be verified,
+ if verify_backlog_batch is larger than verify_backlog, some
+ blocks will be verified more than once.
stonewall Wait for preceeding jobs in the job file to exit, before
starting this one. Can be used to insert serialization
for how to capture such logging data. For blktrace replay,
the file needs to be turned into a blkparse binary data
file first (blkparse <device> -o /dev/null -d file_for_fio.bin).
+
+replay_no_stall=int When replaying I/O with read_iolog the default behavior
+ is to attempt to respect the time stamps within the log and
+ replay them with the appropriate delay between IOPS. By
+ setting this variable fio will not respect the timestamps and
+ attempt to replay them as fast as possible while still
+ respecting ordering. The result is the same I/O pattern to a
+ given device, but different timings.
+
+replay_redirect=str While replaying I/O patterns using read_iolog the
+ default behavior is to replay the IOPS onto the major/minor
+ device that each IOP was recorded from. This is sometimes
+ undesireable because on a different machine those major/minor
+ numbers can map to a different device. Changing hardware on
+ the same system can also result in a different major/minor
+ mapping. Replay_redirect causes all IOPS to be replayed onto
+ the single specified device regardless of the device it was
+ recorded from. i.e. replay_redirect=/dev/sdc would cause all
+ IO in the blktrace to be replayed onto /dev/sdc. This means
+ multiple devices will be replayed onto a single, if the trace
+ contains multiple devices. If you want multiple devices to be
+ replayed concurrently to multiple redirected devices you must
+ blkparse your trace into separate traces and replay them with
+ independent fio invocations. Unfortuantely this also breaks
+ the strict time ordering between multiple device accesses.
write_bw_log=str If given, write a bandwidth log of the jobs in this job
file. Can be used to store data of the bandwidth of the
of the results, fio can output the results in a semicolon separated format.
The format is one long line of values, such as:
-client1;0;0;1906777;1090804;1790;0;0;0.000000;0.000000;0;0;0.000000;0.000000;929380;1152890;25.510151%;1078276.333333;128948.113404;0;0;0;0;0;0.000000;0.000000;0;0;0.000000;0.000000;0;0;0.000000%;0.000000;0.000000;100.000000%;0.000000%;324;100.0%;0.0%;0.0%;0.0%;0.0%;0.0%;0.0%;100.0%;0.0%;0.0%;0.0%;0.0%;0.0%
-;0.0%;0.0%;0.0%;0.0%;0.0%
+2;card0;0;0;7139336;121836;60004;1;10109;27.932460;116.933948;220;126861;3495.446807;1085.368601;226;126864;3523.635629;1089.012448;24063;99944;50.275485%;59818.274627;5540.657370;7155060;122104;60004;1;8338;29.086342;117.839068;388;128077;5032.488518;1234.785715;391;128085;5061.839412;1236.909129;23436;100928;50.287926%;59964.832030;5644.844189;14.595833%;19.394167%;123706;0;7313;0.1%;0.1%;0.1%;0.1%;0.1%;0.1%;100.0%;0.00%;0.00%;0.00%;0.00%;0.00%;0.00%;0.01%;0.02%;0.05%;0.16%;6.04%;40.40%;52.68%;0.64%;0.01%;0.00%;0.01%;0.00%;0.00%;0.00%;0.00%;0.00%
+A description of this job goes here.
-To enable terse output, use the --minimal command line option.
+The job description (if provided) follows on a second line.
+
+To enable terse output, use the --minimal command line option. The first
+value is the version of the terse output format. If the output has to
+be changed for some reason, this number will be incremented by 1 to
+signify that change.
Split up, the format is as follows:
- jobname, groupid, error
+ version, jobname, groupid, error
READ status:
KB IO, bandwidth (KB/sec), runtime (msec)
Submission latency: min, max, mean, deviation
Completion latency: min, max, mean, deviation
+ Total latency: min, max, mean, deviation
Bw: min, max, aggregate percentage of total, mean, deviation
WRITE status:
KB IO, bandwidth (KB/sec), runtime (msec)
Submission latency: min, max, mean, deviation
Completion latency: min, max, mean, deviation
+ Total latency: min, max, mean, deviation
Bw: min, max, aggregate percentage of total, mean, deviation
CPU usage: user, system, context switches, major faults, minor faults
IO depths: <=1, 2, 4, 8, 16, 32, >=64
- IO latencies: <=2, 4, 10, 20, 50, 100, 250, 500, 750, 1000, >=2000
- Text description
-
+ IO latencies microseconds: <=2, 4, 10, 20, 50, 100, 250, 500, 750, 1000
+ IO latencies milliseconds: <=2, 4, 10, 20, 50, 100, 250, 500, 750, 1000, 2000, >=2000
+ Additional Info (dependant on continue_on_error, default off): total # errors, first error code
+
+ Additional Info (dependant on description being set): Text description
projects / fio.git / blobdiff