IO engine How do we issue io? We could be memory mapping the
file, we could be using regular read/write, we
- could be using splice, async io, syslet, or even
- SG (SCSI generic sg).
+ could be using splice, async io, or even SG
+ (SCSI generic sg).
IO depth If the io engine is async, how large a queuing
depth do we want to maintain?
filename=str Fio normally makes up a filename based on the job name,
thread number, and file number. If you want to share
files between threads in a job or several jobs, specify
- a filename for each of them to override the default. If
- the ioengine used is 'net', the filename is the host, port,
- and protocol to use in the format of =host,port,protocol.
- See ioengine=net for more. If the ioengine is file based, you
- can specify a number of files by separating the names with a
- ':' colon. So if you wanted a job to open /dev/sda and /dev/sdb
- as the two working files, you would use
- filename=/dev/sda:/dev/sdb. On Windows, disk devices are
- accessed as \\.\PhysicalDrive0 for the first device,
- \\.\PhysicalDrive1 for the second etc. Note: Windows and
- FreeBSD prevent write access to areas of the disk containing
- in-use data (e.g. filesystems).
+ a filename for each of them to override the default.
+ If the ioengine is file based, you can specify a number of
+ files by separating the names with a ':' colon. So if you
+ wanted a job to open /dev/sda and /dev/sdb as the two working
+ files, you would use filename=/dev/sda:/dev/sdb. On Windows,
+ disk devices are accessed as \\.\PhysicalDrive0 for the first
+ device, \\.\PhysicalDrive1 for the second etc. Note: Windows
+ and FreeBSD prevent write access to areas of the disk
+ containing in-use data (e.g. filesystems).
If the wanted filename does need to include a colon, then
escape that with a '\' character. For instance, if the filename
is "/dev/dsk/foo@3,0:c", then you would use
default of $jobname.$jobnum.$filenum will be used if
no other format specifier is given.
+unique_filename=bool To avoid collisions between networked clients, fio
+ defaults to prefixing any generated filenames (with a directory
+ specified) with the source of the client connecting. To disable
+ this behavior, set this option to 0.
+
opendir=str Tell fio to recursively add any file it can find in this
directory and down the file system tree.
trimwrite Mixed trims and writes. Blocks will be
trimmed first, then written to.
+ Fio defaults to read if the option is not specified.
For the mixed io types, the default is to split them 50/50.
For certain types of io the result may still be skewed a bit,
since the speed may be different. It is possible to specify
the next. Multiple files can still be
open depending on 'openfiles'.
- The string can have a number appended, indicating how
- often to switch to a new file. So if option random:4 is
- given, fio will switch to a new random file after 4 ios
- have been issued.
+ zipf Use a zipfian distribution to decide what file
+ to access.
+
+ pareto Use a pareto distribution to decide what file
+ to access.
+
+ gauss Use a gaussian (normal) distribution to decide
+ what file to access.
+
+ For random, roundrobin, and sequential, a postfix can be
+ appended to tell fio how many I/Os to issue before switching
+ to a new file. For example, specifying
+ 'file_service_type=random:8' would cause fio to issue 8 I/Os
+ before selecting a new file at random. For the non-uniform
+ distributions, a floating point postfix can be given to
+ influence how the distribution is skewed. See
+ 'random_distribution' for a description of how that would work.
ioengine=str Defines how the job issues io to the file. The following
types are defined:
sync Basic read(2) or write(2) io. lseek(2) is
used to position the io location.
- psync Basic pread(2) or pwrite(2) io.
+ psync Basic pread(2) or pwrite(2) io. Default on all
+ supported operating systems except for Windows.
vsync Basic readv(2) or writev(2) IO.
- psyncv Basic preadv(2) or pwritev(2) IO.
+ pvsync Basic preadv(2) or pwritev(2) IO.
+
+ pvsync2 Basic preadv2(2) or pwritev2(2) IO.
libaio Linux native asynchronous io. Note that Linux
may only support queued behaviour with
solarisaio Solaris native asynchronous io.
windowsaio Windows native asynchronous io.
+ Default on Windows.
mmap File is memory mapped and data copied
to/from using memcpy(3).
vmsplice(2) to transfer data from user
space to the kernel.
- syslet-rw Use the syslet system calls to make
- regular read/write async.
-
sg SCSI generic sg v3 io. May either be
synchronous using the SG_IO ioctl, or if
the target is an sg character device
cpuio Doesn't transfer any data, but burns CPU
cycles according to the cpuload= and
- cpucycle= options. Setting cpuload=85
+ cpuchunks= options. Setting cpuload=85
will cause that job to do nothing but burn
85% of the CPU. In case of SMP machines,
use numjobs=<no_of_cpu> to get desired CPU
usage, as the cpuload only loads a single
- CPU at the desired rate.
+ CPU at the desired rate. A job never finishes
+ unless there is at least one non-cpuio job.
guasi The GUASI IO engine is the Generic Userspace
Asyncronous Syscall Interface approach
overwriting. The writetrim mode works well
for this constraint.
+ pmemblk Read and write through the NVML libpmemblk
+ interface.
+
external Prefix to specify loading an external
IO engine object file. Append the engine
filename, eg ioengine=external:/tmp/foo.o
prio=int Set the io priority value of this job. Linux limits us to
a positive value between 0 and 7, with 0 being the highest.
- See man ionice(1).
+ See man ionice(1). Refer to an appropriate manpage for
+ other operating systems since meaning of priority may differ.
prioclass=int Set the io priority class. See man ionice(1).
The allowed values are:
malloc Use memory from malloc(3) as the buffers.
+ Default memory type.
shm Use shared memory as the buffers. Allocated
through shmget(2).
default is to wait for each job to finish.
bwavgtime=int Average the calculated bandwidth over the given time. Value
- is specified in milliseconds.
+ is specified in milliseconds. If the job also does bandwidth
+ logging through 'write_bw_log', then the minimum of this option
+ and 'log_avg_msec' will be used. Default: 500ms.
iopsavgtime=int Average the calculated IOPS over the given time. Value
- is specified in milliseconds.
+ is specified in milliseconds. If the job also does IOPS logging
+ through 'write_iops_log', then the minimum of this option and
+ 'log_avg_msec' will be used. Default: 500ms.
create_serialize=bool If true, serialize the file creating for the jobs.
This may be handy to avoid interleaving of data
[psyncv2] hipri Set RWF_HIPRI on IO, indicating to the kernel that
it's of higher priority than normal.
-[cpu] cpuload=int Attempt to use the specified percentage of CPU cycles.
+[cpuio] cpuload=int Attempt to use the specified percentage of CPU cycles.
-[cpu] cpuchunks=int Split the load into cycles of the given time. In
+[cpuio] cpuchunks=int Split the load into cycles of the given time. In
microseconds.
-[cpu] exit_on_io_done=bool Detect when IO threads are done, then exit.
+[cpuio] exit_on_io_done=bool Detect when IO threads are done, then exit.
[netsplice] hostname=str
[net] hostname=str The host name or IP address to use for TCP or UDP based IO.
projects / fio.git / blobdiff