If the option accepts an upper and lower range, use a colon ':' or
minus '-' to separate such values. See :ref:`irange <irange>`.
+ If the lower value specified happens to be larger than the upper value,
+ two values are swapped.
.. _bool:
If this isn't set, fio will abort jobs that are destructive (e.g. that write)
to what appears to be a mounted device or partition. This should help catch
creating inadvertently destructive tests, not realizing that the test will
- destroy data on the mounted file system. Default: false.
+ destroy data on the mounted file system. Note that some platforms don't allow
+ writing against a mounted device regardless of this option. Default: false.
.. option:: pre_read=bool
.. option:: offset=int
- Start I/O at the given offset in the file. The data before the given offset
- will not be touched. This effectively caps the file size at `real_size -
- offset`. Can be combined with :option:`size` to constrain the start and
- end range that I/O will be done within.
+ Start I/O at the provided offset in the file, given as either a fixed size or
+ a percentage. If a percentage is given, the next ``blockalign``-ed offset
+ will be used. Data before the given offset will not be touched. This
+ effectively caps the file size at `real_size - offset`. Can be combined with
+ :option:`size` to constrain the start and end range of the I/O workload.
.. option:: offset_increment=int
blocks given. For example, if you give 32 as a parameter, fio will sync the
file for every 32 writes issued. If fio is using non-buffered I/O, we may
not sync the file. The exception is the sg I/O engine, which synchronizes
- the disk cache anyway.
+ the disk cache anyway. Defaults to 0, which means no sync every certain
+ number of writes.
.. option:: fdatasync=int
Like :option:`fsync` but uses :manpage:`fdatasync(2)` to only sync data and
not metadata blocks. In Windows, FreeBSD, and DragonFlyBSD there is no
:manpage:`fdatasync(2)`, this falls back to using :manpage:`fsync(2)`.
+ Defaults to 0, which means no sync data every certain number of writes.
.. option:: write_barrier=int
means default for reads, 8k for writes and trims.
**bs=,8k,**
- means default for reads, 8k for writes, and default for writes.
+ means default for reads, 8k for writes, and default for trims.
.. option:: blocksize_range=irange[,irange][,irange], bsrange=irange[,irange][,irange]
.. option:: buffer_pattern=str
- If set, fio will fill the I/O buffers with this pattern. If not set, the
- contents of I/O buffers is defined by the other options related to buffer
- contents. The setting can be any pattern of bytes, and can be prefixed with
- 0x for hex values. It may also be a string, where the string must then be
- wrapped with ``""``, e.g.::
+ If set, fio will fill the I/O buffers with this pattern or with the contents
+ of a file. If not set, the contents of I/O buffers are defined by the other
+ options related to buffer contents. The setting can be any pattern of bytes,
+ and can be prefixed with 0x for hex values. It may also be a string, where
+ the string must then be wrapped with ``""``. Or it may also be a filename,
+ where the filename must be wrapped with ``''`` in which case the file is
+ opened and read. Note that not all the file contents will be read if that
+ would cause the buffers to overflow. So, for example::
+
+ buffer_pattern='filename'
+
+ or::
buffer_pattern="abcd"
Also you can combine everything together in any order::
- buffer_pattern=0xdeadface"abcd"-12
+ buffer_pattern=0xdeadface"abcd"-12'filename'
.. option:: dedupe_percentage=int
.. option:: invalidate=bool
Invalidate the buffer/page cache parts for this file prior to starting
- I/O. Defaults to true.
+ I/O if the platform and file type support it. Defaults to true.
+ This will be ignored if :option:`pre_read` is also specified for the
+ same job.
.. option:: sync=bool
**mmapshared**
Same as mmap, but use a MMAP_SHARED mapping.
+ **cudamalloc**
+ Use GPU memory as the buffers for GPUDirect RDMA benchmark.
+
The area allocated is a function of the maximum allowed bs size for the job,
multiplied by the I/O depth given. Note that for **shmhuge** and
**mmaphuge** to work, the system must have free huge pages allocated. This
**sync**
Basic :manpage:`read(2)` or :manpage:`write(2)`
I/O. :manpage:`lseek(2)` is used to position the I/O location.
+ See :option:`fsync` and :option:`fdatasync` for syncing write I/Os.
**psync**
Basic :manpage:`pread(2)` or :manpage:`pwrite(2)` I/O. Default on
DDIR_TRIM
does fallocate(,mode = FALLOC_FL_KEEP_SIZE|FALLOC_FL_PUNCH_HOLE).
+ **ftruncate**
+ I/O engine that sends :manpage:`ftruncate(2)` operations in response
+ to write (DDIR_WRITE) events. Each ftruncate issued sets the file's
+ size to the current block offset. Block size is ignored.
+
**e4defrag**
I/O engine that does regular EXT4_IOC_MOVE_EXT ioctls to simulate
defragment activity in request to DDIR_WRITE event.
.. option:: cpuload=int : [cpuio]
- Attempt to use the specified percentage of CPU cycles.
+ Attempt to use the specified percentage of CPU cycles. This is a mandatory
+ option when using cpuio I/O engine.
.. option:: cpuchunks=int : [cpuio]
contents to one or more separate threads. If using this offload option, even
sync I/O engines can benefit from using an :option:`iodepth` setting higher
than 1, as it allows them to have I/O in flight while verifies are running.
+ Defaults to 0 async threads, i.e. verification is not asynchronous.
.. option:: verify_async_cpus=str
<type> is "local" for a local run, "sock" for a client/server socket
connection, and "ip" (192.168.0.1, for instance) for a networked
- client/server connection.
+ client/server connection. Defaults to true.
.. option:: verify_state_load=bool
all jobs in a file will be part of the same reporting group, unless
separated by a :option:`stonewall`.
+.. option:: stats
+
+ By default, fio collects and shows final output results for all jobs
+ that run. If this option is set to 0, then fio will ignore it in
+ the final stat output.
+
.. option:: write_bw_log=str
If given, write a bandwidth log for this job. Can be used to store data of
.. option:: ignore_error=str
Sometimes you want to ignore some errors during test in that case you can
- specify error list for each error type.
+ specify error list for each error type, instead of only being able to
+ ignore the default 'non-fatal error' using :option:`continue_on_error`.
``ignore_error=READ_ERR_LIST,WRITE_ERR_LIST,VERIFY_ERR_LIST`` errors for
given error type is separated with ':'. Error may be symbol ('ENOSPC',
'ENOMEM') or integer. Example::
ignore_error=EAGAIN,ENOSPC:122
This option will ignore EAGAIN from READ, and ENOSPC and 122(EDQUOT) from
- WRITE.
+ WRITE. This option works by overriding :option:`continue_on_error` with
+ the list of errors for each error type if any.
.. option:: error_dump=bool
Total IO (KiB), bandwidth (KiB/sec), IOPS, runtime (msec)
Submission latency: min, max, mean, stdev (usec)
- Completion latency: min, max, mean, stdev(usec)
+ Completion latency: min, max, mean, stdev (usec)
Completion latency percentiles: 20 fields (see below)
Total latency: min, max, mean, stdev (usec)
Bw (KiB/s): min, max, aggregate percentage of total, mean, stdev
For disk utilization, all disks used by fio are shown. So for each disk there
will be a disk utilization section.
+Below is a single line containing short names for each of the fields in the
+minimal output v3, separated by semicolons:
+
+terse_version_3;fio_version;jobname;groupid;error;read_kb;read_bandwidth;read_iops;read_runtime_ms;read_slat_min;read_slat_max;read_slat_mean;read_slat_dev;read_clat_max;read_clat_min;read_clat_mean;read_clat_dev;read_clat_pct01;read_clat_pct02;read_clat_pct03;read_clat_pct04;read_clat_pct05;read_clat_pct06;read_clat_pct07;read_clat_pct08;read_clat_pct09;read_clat_pct10;read_clat_pct11;read_clat_pct12;read_clat_pct13;read_clat_pct14;read_clat_pct15;read_clat_pct16;read_clat_pct17;read_clat_pct18;read_clat_pct19;read_clat_pct20;read_tlat_min;read_lat_max;read_lat_mean;read_lat_dev;read_bw_min;read_bw_max;read_bw_agg_pct;read_bw_mean;read_bw_dev;write_kb;write_bandwidth;write_iops;write_runtime_ms;write_slat_min;write_slat_max;write_slat_mean;write_slat_dev;write_clat_max;write_clat_min;write_clat_mean;write_clat_dev;write_clat_pct01;write_clat_pct02;write_clat_pct03;write_clat_pct04;write_clat_pct05;write_clat_pct06;write_clat_pct07;write_clat_pct08;write_clat_pct09;write_clat_pct10;write_clat_pct11;write_clat_pct12;write_clat_pct13;write_clat_pct14;write_clat_pct15;write_clat_pct16;write_clat_pct17;write_clat_pct18;write_clat_pct19;write_clat_pct20;write_tlat_min;write_lat_max;write_lat_mean;write_lat_dev;write_bw_min;write_bw_max;write_bw_agg_pct;write_bw_mean;write_bw_dev;cpu_user;cpu_sys;cpu_csw;cpu_mjf;pu_minf;iodepth_1;iodepth_2;iodepth_4;iodepth_8;iodepth_16;iodepth_32;iodepth_64;lat_2us;lat_4us;lat_10us;lat_20us;lat_50us;lat_100us;lat_250us;lat_500us;lat_750us;lat_1000us;lat_2ms;lat_4ms;lat_10ms;lat_20ms;lat_50ms;lat_100ms;lat_250ms;lat_500ms;lat_750ms;lat_1000ms;lat_2000ms;lat_over_2000ms;disk_name;disk_read_iops;disk_write_iops;disk_read_merges;disk_write_merges;disk_read_ticks;write_ticks;disk_queue_time;disk_util
+
Trace file format
-----------------
projects / fio.git / blobdiff