Asynchronous read and write using DDN's Infinite Memory Engine (IME).
This engine will try to stack as much IOs as possible by creating
requests for IME. FIO will then decide when to commit these requests.
+ **libiscsi**
+ Read and write iscsi lun with libiscsi.
I/O engine specific parameters
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
``serialize_overlap`` tells fio to avoid provoking this behavior by explicitly
serializing in-flight I/Os that have a non-zero overlap. Note that setting
this option can reduce both performance and the :option:`iodepth` achieved.
- Additionally this option does not work when :option:`io_submit_mode` is set to
- offload. Default: false.
+
+ This option only applies to I/Os issued for a single job except when it is
+ enabled along with :option:`io_submit_mode`=offload. In offload mode, fio
+ will check for overlap among all I/Os submitted by offload jobs with :option:`serialize_overlap`
+ enabled.
+
+ Default: false.
.. option:: io_submit_mode=str
.. option:: replay_align=int
- Force alignment of I/O offsets and lengths in a trace to this power of 2
- value.
+ Force alignment of the byte offsets in a trace to this value. The value
+ must be a power of 2.
.. option:: replay_scale=int
- Scale sector offsets down by this factor when replaying traces.
+ Scale byte offsets down by this factor when replaying traces. Should most
+ likely use :option:`replay_align` as well.
.. option:: replay_skip=str
2;card0;0;0;7139336;121836;60004;1;10109;27.932460;116.933948;220;126861;3495.446807;1085.368601;226;126864;3523.635629;1089.012448;24063;99944;50.275485%;59818.274627;5540.657370;7155060;122104;60004;1;8338;29.086342;117.839068;388;128077;5032.488518;1234.785715;391;128085;5061.839412;1236.909129;23436;100928;50.287926%;59964.832030;5644.844189;14.595833%;19.394167%;123706;0;7313;0.1%;0.1%;0.1%;0.1%;0.1%;0.1%;100.0%;0.00%;0.00%;0.00%;0.00%;0.00%;0.00%;0.01%;0.02%;0.05%;0.16%;6.04%;40.40%;52.68%;0.64%;0.01%;0.00%;0.01%;0.00%;0.00%;0.00%;0.00%;0.00%
A description of this job goes here.
-The job description (if provided) follows on a second line.
+The job description (if provided) follows on a second line for terse v2.
+It appears on the same line for other terse versions.
To enable terse output, use the :option:`--minimal` or
:option:`--output-format`\=terse command line options. The
terse_version_3;fio_version;jobname;groupid;error;read_kb;read_bandwidth;read_iops;read_runtime_ms;read_slat_min;read_slat_max;read_slat_mean;read_slat_dev;read_clat_min;read_clat_max;read_clat_mean;read_clat_dev;read_clat_pct01;read_clat_pct02;read_clat_pct03;read_clat_pct04;read_clat_pct05;read_clat_pct06;read_clat_pct07;read_clat_pct08;read_clat_pct09;read_clat_pct10;read_clat_pct11;read_clat_pct12;read_clat_pct13;read_clat_pct14;read_clat_pct15;read_clat_pct16;read_clat_pct17;read_clat_pct18;read_clat_pct19;read_clat_pct20;read_tlat_min;read_lat_max;read_lat_mean;read_lat_dev;read_bw_min;read_bw_max;read_bw_agg_pct;read_bw_mean;read_bw_dev;write_kb;write_bandwidth;write_iops;write_runtime_ms;write_slat_min;write_slat_max;write_slat_mean;write_slat_dev;write_clat_min;write_clat_max;write_clat_mean;write_clat_dev;write_clat_pct01;write_clat_pct02;write_clat_pct03;write_clat_pct04;write_clat_pct05;write_clat_pct06;write_clat_pct07;write_clat_pct08;write_clat_pct09;write_clat_pct10;write_clat_pct11;write_clat_pct12;write_clat_pct13;write_clat_pct14;write_clat_pct15;write_clat_pct16;write_clat_pct17;write_clat_pct18;write_clat_pct19;write_clat_pct20;write_tlat_min;write_lat_max;write_lat_mean;write_lat_dev;write_bw_min;write_bw_max;write_bw_agg_pct;write_bw_mean;write_bw_dev;cpu_user;cpu_sys;cpu_csw;cpu_mjf;cpu_minf;iodepth_1;iodepth_2;iodepth_4;iodepth_8;iodepth_16;iodepth_32;iodepth_64;lat_2us;lat_4us;lat_10us;lat_20us;lat_50us;lat_100us;lat_250us;lat_500us;lat_750us;lat_1000us;lat_2ms;lat_4ms;lat_10ms;lat_20ms;lat_50ms;lat_100ms;lat_250ms;lat_500ms;lat_750ms;lat_1000ms;lat_2000ms;lat_over_2000ms;disk_name;disk_read_iops;disk_write_iops;disk_read_merges;disk_write_merges;disk_read_ticks;write_ticks;disk_queue_time;disk_util
+In client/server mode terse output differs from what appears when jobs are run
+locally. Disk utilization data is omitted from the standard terse output and
+for v3 and later appears on its own separate line at the end of each terse
+reporting cycle.
+
JSON output
------------
its values in a separate row. Further, when using windowed logging the *block
size* and *offset* entries will always contain 0.
+
Client/Server
-------------
/mnt/nfs/fio/192.168.10.120.fileio.tmp
/mnt/nfs/fio/192.168.10.121.fileio.tmp
+
+Terse output in client/server mode will differ slightly from what is produced
+when fio is run in stand-alone mode. See the terse output section for details.
projects / fio.git / blobdiff