Fio 1.27.1
[fio.git] / log.c
1 /*
2  * Code related to writing an iolog of what a thread is doing, and to
3  * later read that back and replay
4  */
5 #include <stdio.h>
6 #include <stdlib.h>
7 #include <libgen.h>
8 #include <assert.h>
9 #include "flist.h"
10 #include "fio.h"
11 #include "verify.h"
12
13 static const char iolog_ver2[] = "fio version 2 iolog";
14
15 void queue_io_piece(struct thread_data *td, struct io_piece *ipo)
16 {
17         flist_add_tail(&ipo->list, &td->io_log_list);
18         td->total_io_size += ipo->len;
19 }
20
21 void log_io_u(struct thread_data *td, struct io_u *io_u)
22 {
23         const char *act[] = { "read", "write", "sync" };
24
25         assert(io_u->ddir < 3);
26
27         if (!td->o.write_iolog_file)
28                 return;
29
30         fprintf(td->iolog_f, "%s %s %llu %lu\n", io_u->file->file_name,
31                                                 act[io_u->ddir], io_u->offset,
32                                                 io_u->buflen);
33 }
34
35 void log_file(struct thread_data *td, struct fio_file *f,
36               enum file_log_act what)
37 {
38         const char *act[] = { "add", "open", "close" };
39
40         assert(what < 3);
41
42         if (!td->o.write_iolog_file)
43                 return;
44
45
46         /*
47          * this happens on the pre-open/close done before the job starts
48          */
49         if (!td->iolog_f)
50                 return;
51
52         fprintf(td->iolog_f, "%s %s\n", f->file_name, act[what]);
53 }
54
55 static void iolog_delay(struct thread_data *td, unsigned long delay)
56 {
57         unsigned long usec = utime_since_now(&td->last_issue);
58
59         if (delay < usec)
60                 return;
61
62         delay -= usec;
63
64         /*
65          * less than 100 usec delay, just regard it as noise
66          */
67         if (delay < 100)
68                 return;
69
70         usec_sleep(td, delay);
71 }
72
73 static int ipo_special(struct thread_data *td, struct io_piece *ipo)
74 {
75         struct fio_file *f;
76         int ret;
77
78         /*
79          * Not a special ipo
80          */
81         if (ipo->ddir != DDIR_INVAL)
82                 return 0;
83
84         f = td->files[ipo->fileno];
85
86         switch (ipo->file_action) {
87         case FIO_LOG_OPEN_FILE:
88                 ret = td_io_open_file(td, f);
89                 if (!ret) {
90                         free(ipo);
91                         break;
92                 }
93                 td_verror(td, ret, "iolog open file");
94                 return -1;
95         case FIO_LOG_CLOSE_FILE:
96                 td_io_close_file(td, f);
97                 break;
98         case FIO_LOG_UNLINK_FILE:
99                 unlink(f->file_name);
100                 break;
101         default:
102                 log_err("fio: bad file action %d\n", ipo->file_action);
103                 break;
104         }
105
106         return 1;
107 }
108
109 int read_iolog_get(struct thread_data *td, struct io_u *io_u)
110 {
111         struct io_piece *ipo;
112
113         while (!flist_empty(&td->io_log_list)) {
114                 int ret;
115
116                 ipo = flist_entry(td->io_log_list.next, struct io_piece, list);
117                 flist_del(&ipo->list);
118
119                 ret = ipo_special(td, ipo);
120                 if (ret < 0) {
121                         free(ipo);
122                         break;
123                 } else if (ret > 0) {
124                         free(ipo);
125                         continue;
126                 }
127
128                 io_u->offset = ipo->offset;
129                 io_u->buflen = ipo->len;
130                 io_u->ddir = ipo->ddir;
131                 io_u->file = td->files[ipo->fileno];
132                 get_file(io_u->file);
133
134                 dprint(FD_IO, "iolog: get %llu/%lu/%s\n", io_u->offset,
135                                         io_u->buflen, io_u->file->file_name);
136
137                 if (ipo->delay)
138                         iolog_delay(td, ipo->delay);
139
140                 free(ipo);
141                 return 0;
142         }
143
144         td->done = 1;
145         return 1;
146 }
147
148 void prune_io_piece_log(struct thread_data *td)
149 {
150         struct io_piece *ipo;
151         struct rb_node *n;
152
153         while ((n = rb_first(&td->io_hist_tree)) != NULL) {
154                 ipo = rb_entry(n, struct io_piece, rb_node);
155                 rb_erase(n, &td->io_hist_tree);
156                 free(ipo);
157         }
158
159         while (!flist_empty(&td->io_hist_list)) {
160                 ipo = flist_entry(td->io_hist_list.next, struct io_piece, list);
161                 flist_del(&ipo->list);
162                 free(ipo);
163         }
164 }
165
166 /*
167  * log a successful write, so we can unwind the log for verify
168  */
169 void log_io_piece(struct thread_data *td, struct io_u *io_u)
170 {
171         struct rb_node **p, *parent;
172         struct io_piece *ipo, *__ipo;
173
174         ipo = malloc(sizeof(struct io_piece));
175         ipo->file = io_u->file;
176         ipo->offset = io_u->offset;
177         ipo->len = io_u->buflen;
178
179         /*
180          * We don't need to sort the entries, if:
181          *
182          *      Sequential writes, or
183          *      Random writes that lay out the file as it goes along
184          *
185          * For both these cases, just reading back data in the order we
186          * wrote it out is the fastest.
187          *
188          * One exception is if we don't have a random map AND we are doing
189          * verifies, in that case we need to check for duplicate blocks and
190          * drop the old one, which we rely on the rb insert/lookup for
191          * handling.
192          */
193         if ((!td_random(td) || !td->o.overwrite) &&
194               (file_randommap(td, ipo->file) || td->o.verify == VERIFY_NONE)) {
195                 INIT_FLIST_HEAD(&ipo->list);
196                 flist_add_tail(&ipo->list, &td->io_hist_list);
197                 return;
198         }
199
200         RB_CLEAR_NODE(&ipo->rb_node);
201
202         /*
203          * Sort the entry into the verification list
204          */
205 restart:
206         p = &td->io_hist_tree.rb_node;
207         parent = NULL;
208         while (*p) {
209                 parent = *p;
210
211                 __ipo = rb_entry(parent, struct io_piece, rb_node);
212                 if (ipo->offset < __ipo->offset)
213                         p = &(*p)->rb_left;
214                 else if (ipo->offset > __ipo->offset)
215                         p = &(*p)->rb_right;
216                 else {
217                         assert(ipo->len == __ipo->len);
218                         rb_erase(parent, &td->io_hist_tree);
219                         goto restart;
220                 }
221         }
222
223         rb_link_node(&ipo->rb_node, parent, p);
224         rb_insert_color(&ipo->rb_node, &td->io_hist_tree);
225 }
226
227 void write_iolog_close(struct thread_data *td)
228 {
229         fflush(td->iolog_f);
230         fclose(td->iolog_f);
231         free(td->iolog_buf);
232         td->iolog_f = NULL;
233         td->iolog_buf = NULL;
234 }
235
236 /*
237  * Read version 2 iolog data. It is enhanced to include per-file logging,
238  * syncs, etc.
239  */
240 static int read_iolog2(struct thread_data *td, FILE *f)
241 {
242         unsigned long long offset;
243         unsigned int bytes;
244         int reads, writes, fileno = 0, file_action = 0; /* stupid gcc */
245         char *fname, *act;
246         char *str, *p;
247         enum fio_ddir rw;
248
249         free_release_files(td);
250
251         /*
252          * Read in the read iolog and store it, reuse the infrastructure
253          * for doing verifications.
254          */
255         str = malloc(4096);
256         fname = malloc(256+16);
257         act = malloc(256+16);
258
259         reads = writes = 0;
260         while ((p = fgets(str, 4096, f)) != NULL) {
261                 struct io_piece *ipo;
262                 int r;
263
264                 r = sscanf(p, "%256s %256s %llu %u", fname, act, &offset,
265                                                                         &bytes);
266                 if (r == 4) {
267                         /*
268                          * Check action first
269                          */
270                         if (!strcmp(act, "read"))
271                                 rw = DDIR_READ;
272                         else if (!strcmp(act, "write"))
273                                 rw = DDIR_WRITE;
274                         else if (!strcmp(act, "sync"))
275                                 rw = DDIR_SYNC;
276                         else {
277                                 log_err("fio: bad iolog file action: %s\n",
278                                                                         act);
279                                 continue;
280                         }
281                 } else if (r == 2) {
282                         rw = DDIR_INVAL;
283                         if (!strcmp(act, "add")) {
284                                 td->o.nr_files++;
285                                 fileno = add_file(td, fname);
286                                 file_action = FIO_LOG_ADD_FILE;
287                                 continue;
288                         } else if (!strcmp(act, "open")) {
289                                 fileno = get_fileno(td, fname);
290                                 file_action = FIO_LOG_OPEN_FILE;
291                         } else if (!strcmp(act, "close")) {
292                                 fileno = get_fileno(td, fname);
293                                 file_action = FIO_LOG_CLOSE_FILE;
294                         } else {
295                                 log_err("fio: bad iolog file action: %s\n",
296                                                                         act);
297                                 continue;
298                         }
299                 } else {
300                         log_err("bad iolog2: %s", p);
301                         continue;
302                 }
303
304                 if (rw == DDIR_READ)
305                         reads++;
306                 else if (rw == DDIR_WRITE) {
307                         /*
308                          * Don't add a write for ro mode
309                          */
310                         if (read_only)
311                                 continue;
312                         writes++;
313                 } else if (rw != DDIR_SYNC && rw != DDIR_INVAL) {
314                         log_err("bad ddir: %d\n", rw);
315                         continue;
316                 }
317
318                 /*
319                  * Make note of file
320                  */
321                 ipo = malloc(sizeof(*ipo));
322                 memset(ipo, 0, sizeof(*ipo));
323                 INIT_FLIST_HEAD(&ipo->list);
324                 ipo->offset = offset;
325                 ipo->len = bytes;
326                 ipo->ddir = rw;
327                 if (bytes > td->o.max_bs[rw])
328                         td->o.max_bs[rw] = bytes;
329                 if (rw == DDIR_INVAL) {
330                         ipo->fileno = fileno;
331                         ipo->file_action = file_action;
332                 }
333                 queue_io_piece(td, ipo);
334         }
335
336         free(str);
337         free(act);
338         free(fname);
339
340         if (writes && read_only) {
341                 log_err("fio: <%s> skips replay of %d writes due to"
342                         " read-only\n", td->o.name, writes);
343                 writes = 0;
344         }
345
346         if (!reads && !writes)
347                 return 1;
348         else if (reads && !writes)
349                 td->o.td_ddir = TD_DDIR_READ;
350         else if (!reads && writes)
351                 td->o.td_ddir = TD_DDIR_WRITE;
352         else
353                 td->o.td_ddir = TD_DDIR_RW;
354
355         return 0;
356 }
357
358 /*
359  * open iolog, check version, and call appropriate parser
360  */
361 static int init_iolog_read(struct thread_data *td)
362 {
363         char buffer[256], *p;
364         FILE *f;
365         int ret;
366
367         f = fopen(td->o.read_iolog_file, "r");
368         if (!f) {
369                 perror("fopen read iolog");
370                 return 1;
371         }
372
373         p = fgets(buffer, sizeof(buffer), f);
374         if (!p) {
375                 td_verror(td, errno, "iolog read");
376                 log_err("fio: unable to read iolog\n");
377                 return 1;
378         }
379
380         /*
381          * version 2 of the iolog stores a specific string as the
382          * first line, check for that
383          */
384         if (!strncmp(iolog_ver2, buffer, strlen(iolog_ver2)))
385                 ret = read_iolog2(td, f);
386         else {
387                 log_err("fio: iolog version 1 is no longer supported\n");
388                 ret = 1;
389         }
390
391         fclose(f);
392         return ret;
393 }
394
395 /*
396  * Setup a log for storing io patterns.
397  */
398 static int init_iolog_write(struct thread_data *td)
399 {
400         struct fio_file *ff;
401         FILE *f;
402         unsigned int i;
403
404         f = fopen(td->o.write_iolog_file, "a");
405         if (!f) {
406                 perror("fopen write iolog");
407                 return 1;
408         }
409
410         /*
411          * That's it for writing, setup a log buffer and we're done.
412           */
413         td->iolog_f = f;
414         td->iolog_buf = malloc(8192);
415         setvbuf(f, td->iolog_buf, _IOFBF, 8192);
416
417         /*
418          * write our version line
419          */
420         if (fprintf(f, "%s\n", iolog_ver2) < 0) {
421                 perror("iolog init\n");
422                 return 1;
423         }
424
425         /*
426          * add all known files
427          */
428         for_each_file(td, ff, i)
429                 log_file(td, ff, FIO_LOG_ADD_FILE);
430
431         return 0;
432 }
433
434 int init_iolog(struct thread_data *td)
435 {
436         int ret = 0;
437
438         if (td->o.read_iolog_file) {
439                 /*
440                  * Check if it's a blktrace file and load that if possible.
441                  * Otherwise assume it's a normal log file and load that.
442                  */
443                 if (is_blktrace(td->o.read_iolog_file))
444                         ret = load_blktrace(td, td->o.read_iolog_file);
445                 else
446                         ret = init_iolog_read(td);
447         } else if (td->o.write_iolog_file)
448                 ret = init_iolog_write(td);
449
450         return ret;
451 }
452
453 void setup_log(struct io_log **log)
454 {
455         struct io_log *l = malloc(sizeof(*l));
456
457         l->nr_samples = 0;
458         l->max_samples = 1024;
459         l->log = malloc(l->max_samples * sizeof(struct io_sample));
460         *log = l;
461 }
462
463 void __finish_log(struct io_log *log, const char *name)
464 {
465         unsigned int i;
466         FILE *f;
467
468         f = fopen(name, "a");
469         if (!f) {
470                 perror("fopen log");
471                 return;
472         }
473
474         for (i = 0; i < log->nr_samples; i++) {
475                 fprintf(f, "%lu, %lu, %u, %u\n", log->log[i].time,
476                                                 log->log[i].val,
477                                                 log->log[i].ddir,
478                                                 log->log[i].bs);
479         }
480
481         fclose(f);
482         free(log->log);
483         free(log);
484 }
485
486 void finish_log_named(struct thread_data *td, struct io_log *log,
487                        const char *prefix, const char *postfix)
488 {
489         char file_name[256], *p;
490
491         snprintf(file_name, 200, "%s_%s.log", prefix, postfix);
492         p = basename(file_name);
493         __finish_log(log, p);
494 }
495
496 void finish_log(struct thread_data *td, struct io_log *log, const char *name)
497 {
498         finish_log_named(td, log, td->o.name, name);
499 }