2 * Code related to writing an iolog of what a thread is doing, and to
3 * later read that back and replay
23 static int iolog_flush(struct io_log *log);
25 static const char iolog_ver2[] = "fio version 2 iolog";
27 void queue_io_piece(struct thread_data *td, struct io_piece *ipo)
29 flist_add_tail(&ipo->list, &td->io_log_list);
30 td->total_io_size += ipo->len;
33 void log_io_u(const struct thread_data *td, const struct io_u *io_u)
35 if (!td->o.write_iolog_file)
38 fprintf(td->iolog_f, "%s %s %llu %lu\n", io_u->file->file_name,
39 io_ddir_name(io_u->ddir),
40 io_u->offset, io_u->buflen);
43 void log_file(struct thread_data *td, struct fio_file *f,
44 enum file_log_act what)
46 const char *act[] = { "add", "open", "close" };
50 if (!td->o.write_iolog_file)
55 * this happens on the pre-open/close done before the job starts
60 fprintf(td->iolog_f, "%s %s\n", f->file_name, act[what]);
63 static void iolog_delay(struct thread_data *td, unsigned long delay)
65 uint64_t usec = utime_since_now(&td->last_issue);
69 if (delay < td->time_offset) {
74 delay -= td->time_offset;
80 fio_gettime(&tv, NULL);
81 while (delay && !td->terminate) {
83 if (this_delay > 500000)
86 usec_sleep(td, this_delay);
90 usec = utime_since_now(&tv);
92 td->time_offset = usec - delay;
97 static int ipo_special(struct thread_data *td, struct io_piece *ipo)
105 if (ipo->ddir != DDIR_INVAL)
108 f = td->files[ipo->fileno];
110 switch (ipo->file_action) {
111 case FIO_LOG_OPEN_FILE:
112 ret = td_io_open_file(td, f);
115 td_verror(td, ret, "iolog open file");
117 case FIO_LOG_CLOSE_FILE:
118 td_io_close_file(td, f);
120 case FIO_LOG_UNLINK_FILE:
121 td_io_unlink_file(td, f);
124 log_err("fio: bad file action %d\n", ipo->file_action);
131 int read_iolog_get(struct thread_data *td, struct io_u *io_u)
133 struct io_piece *ipo;
134 unsigned long elapsed;
136 while (!flist_empty(&td->io_log_list)) {
139 ipo = flist_first_entry(&td->io_log_list, struct io_piece, list);
140 flist_del(&ipo->list);
141 remove_trim_entry(td, ipo);
143 ret = ipo_special(td, ipo);
147 } else if (ret > 0) {
152 io_u->ddir = ipo->ddir;
153 if (ipo->ddir != DDIR_WAIT) {
154 io_u->offset = ipo->offset;
155 io_u->buflen = ipo->len;
156 io_u->file = td->files[ipo->fileno];
157 get_file(io_u->file);
158 dprint(FD_IO, "iolog: get %llu/%lu/%s\n", io_u->offset,
159 io_u->buflen, io_u->file->file_name);
161 iolog_delay(td, ipo->delay);
163 elapsed = mtime_since_genesis();
164 if (ipo->delay > elapsed)
165 usec_sleep(td, (ipo->delay - elapsed) * 1000);
170 if (io_u->ddir != DDIR_WAIT)
178 void prune_io_piece_log(struct thread_data *td)
180 struct io_piece *ipo;
183 while ((n = rb_first(&td->io_hist_tree)) != NULL) {
184 ipo = rb_entry(n, struct io_piece, rb_node);
185 rb_erase(n, &td->io_hist_tree);
186 remove_trim_entry(td, ipo);
191 while (!flist_empty(&td->io_hist_list)) {
192 ipo = flist_first_entry(&td->io_hist_list, struct io_piece, list);
193 flist_del(&ipo->list);
194 remove_trim_entry(td, ipo);
201 * log a successful write, so we can unwind the log for verify
203 void log_io_piece(struct thread_data *td, struct io_u *io_u)
205 struct rb_node **p, *parent;
206 struct io_piece *ipo, *__ipo;
208 ipo = malloc(sizeof(struct io_piece));
210 ipo->file = io_u->file;
211 ipo->offset = io_u->offset;
212 ipo->len = io_u->buflen;
213 ipo->numberio = io_u->numberio;
214 ipo->flags = IP_F_IN_FLIGHT;
218 if (io_u_should_trim(td, io_u)) {
219 flist_add_tail(&ipo->trim_list, &td->trim_list);
224 * We don't need to sort the entries, if:
226 * Sequential writes, or
227 * Random writes that lay out the file as it goes along
229 * For both these cases, just reading back data in the order we
230 * wrote it out is the fastest.
232 * One exception is if we don't have a random map AND we are doing
233 * verifies, in that case we need to check for duplicate blocks and
234 * drop the old one, which we rely on the rb insert/lookup for
237 if (((!td->o.verifysort) || !td_random(td) || !td->o.overwrite) &&
238 (file_randommap(td, ipo->file) || td->o.verify == VERIFY_NONE)) {
239 INIT_FLIST_HEAD(&ipo->list);
240 flist_add_tail(&ipo->list, &td->io_hist_list);
241 ipo->flags |= IP_F_ONLIST;
246 RB_CLEAR_NODE(&ipo->rb_node);
249 * Sort the entry into the verification list
252 p = &td->io_hist_tree.rb_node;
258 __ipo = rb_entry(parent, struct io_piece, rb_node);
259 if (ipo->file < __ipo->file)
261 else if (ipo->file > __ipo->file)
263 else if (ipo->offset < __ipo->offset) {
265 overlap = ipo->offset + ipo->len > __ipo->offset;
267 else if (ipo->offset > __ipo->offset) {
269 overlap = __ipo->offset + __ipo->len > ipo->offset;
275 dprint(FD_IO, "iolog: overlap %llu/%lu, %llu/%lu",
276 __ipo->offset, __ipo->len,
277 ipo->offset, ipo->len);
279 rb_erase(parent, &td->io_hist_tree);
280 remove_trim_entry(td, __ipo);
286 rb_link_node(&ipo->rb_node, parent, p);
287 rb_insert_color(&ipo->rb_node, &td->io_hist_tree);
288 ipo->flags |= IP_F_ONRB;
292 void unlog_io_piece(struct thread_data *td, struct io_u *io_u)
294 struct io_piece *ipo = io_u->ipo;
296 if (td->ts.nr_block_infos) {
297 uint32_t *info = io_u_block_info(td, io_u);
298 if (BLOCK_INFO_STATE(*info) < BLOCK_STATE_TRIM_FAILURE) {
299 if (io_u->ddir == DDIR_TRIM)
300 *info = BLOCK_INFO_SET_STATE(*info,
301 BLOCK_STATE_TRIM_FAILURE);
302 else if (io_u->ddir == DDIR_WRITE)
303 *info = BLOCK_INFO_SET_STATE(*info,
304 BLOCK_STATE_WRITE_FAILURE);
311 if (ipo->flags & IP_F_ONRB)
312 rb_erase(&ipo->rb_node, &td->io_hist_tree);
313 else if (ipo->flags & IP_F_ONLIST)
314 flist_del(&ipo->list);
321 void trim_io_piece(struct thread_data *td, const struct io_u *io_u)
323 struct io_piece *ipo = io_u->ipo;
328 ipo->len = io_u->xfer_buflen - io_u->resid;
331 void write_iolog_close(struct thread_data *td)
337 td->iolog_buf = NULL;
341 * Read version 2 iolog data. It is enhanced to include per-file logging,
344 static int read_iolog2(struct thread_data *td, FILE *f)
346 unsigned long long offset;
348 int reads, writes, waits, fileno = 0, file_action = 0; /* stupid gcc */
353 free_release_files(td);
356 * Read in the read iolog and store it, reuse the infrastructure
357 * for doing verifications.
360 fname = malloc(256+16);
361 act = malloc(256+16);
363 reads = writes = waits = 0;
364 while ((p = fgets(str, 4096, f)) != NULL) {
365 struct io_piece *ipo;
368 r = sscanf(p, "%256s %256s %llu %u", fname, act, &offset,
374 if (!strcmp(act, "wait"))
376 else if (!strcmp(act, "read"))
378 else if (!strcmp(act, "write"))
380 else if (!strcmp(act, "sync"))
382 else if (!strcmp(act, "datasync"))
384 else if (!strcmp(act, "trim"))
387 log_err("fio: bad iolog file action: %s\n",
391 fileno = get_fileno(td, fname);
394 if (!strcmp(act, "add")) {
395 fileno = add_file(td, fname, 0, 1);
396 file_action = FIO_LOG_ADD_FILE;
398 } else if (!strcmp(act, "open")) {
399 fileno = get_fileno(td, fname);
400 file_action = FIO_LOG_OPEN_FILE;
401 } else if (!strcmp(act, "close")) {
402 fileno = get_fileno(td, fname);
403 file_action = FIO_LOG_CLOSE_FILE;
405 log_err("fio: bad iolog file action: %s\n",
410 log_err("bad iolog2: %s", p);
416 else if (rw == DDIR_WRITE) {
418 * Don't add a write for ro mode
423 } else if (rw == DDIR_WAIT) {
425 } else if (rw == DDIR_INVAL) {
426 } else if (!ddir_sync(rw)) {
427 log_err("bad ddir: %d\n", rw);
434 ipo = malloc(sizeof(*ipo));
437 if (rw == DDIR_WAIT) {
440 ipo->offset = offset;
442 if (rw != DDIR_INVAL && bytes > td->o.max_bs[rw])
443 td->o.max_bs[rw] = bytes;
444 ipo->fileno = fileno;
445 ipo->file_action = file_action;
449 queue_io_piece(td, ipo);
456 if (writes && read_only) {
457 log_err("fio: <%s> skips replay of %d writes due to"
458 " read-only\n", td->o.name, writes);
462 if (!reads && !writes && !waits)
464 else if (reads && !writes)
465 td->o.td_ddir = TD_DDIR_READ;
466 else if (!reads && writes)
467 td->o.td_ddir = TD_DDIR_WRITE;
469 td->o.td_ddir = TD_DDIR_RW;
475 * open iolog, check version, and call appropriate parser
477 static int init_iolog_read(struct thread_data *td)
479 char buffer[256], *p;
483 f = fopen(td->o.read_iolog_file, "r");
485 perror("fopen read iolog");
489 p = fgets(buffer, sizeof(buffer), f);
491 td_verror(td, errno, "iolog read");
492 log_err("fio: unable to read iolog\n");
498 * version 2 of the iolog stores a specific string as the
499 * first line, check for that
501 if (!strncmp(iolog_ver2, buffer, strlen(iolog_ver2)))
502 ret = read_iolog2(td, f);
504 log_err("fio: iolog version 1 is no longer supported\n");
513 * Set up a log for storing io patterns.
515 static int init_iolog_write(struct thread_data *td)
521 f = fopen(td->o.write_iolog_file, "a");
523 perror("fopen write iolog");
528 * That's it for writing, setup a log buffer and we're done.
531 td->iolog_buf = malloc(8192);
532 setvbuf(f, td->iolog_buf, _IOFBF, 8192);
535 * write our version line
537 if (fprintf(f, "%s\n", iolog_ver2) < 0) {
538 perror("iolog init\n");
543 * add all known files
545 for_each_file(td, ff, i)
546 log_file(td, ff, FIO_LOG_ADD_FILE);
551 int init_iolog(struct thread_data *td)
555 if (td->o.read_iolog_file) {
559 * Check if it's a blktrace file and load that if possible.
560 * Otherwise assume it's a normal log file and load that.
562 if (is_blktrace(td->o.read_iolog_file, &need_swap))
563 ret = load_blktrace(td, td->o.read_iolog_file, need_swap);
565 ret = init_iolog_read(td);
566 } else if (td->o.write_iolog_file)
567 ret = init_iolog_write(td);
570 td_verror(td, EINVAL, "failed initializing iolog");
575 void setup_log(struct io_log **log, struct log_params *p,
576 const char *filename)
580 l = scalloc(1, sizeof(*l));
581 INIT_FLIST_HEAD(&l->io_logs);
582 l->log_type = p->log_type;
583 l->log_offset = p->log_offset;
584 l->log_gz = p->log_gz;
585 l->log_gz_store = p->log_gz_store;
586 l->avg_msec = p->avg_msec;
587 l->filename = strdup(filename);
590 if (l->td && l->td->o.io_submit_mode != IO_MODE_OFFLOAD) {
593 p = calloc(1, sizeof(*l->pending));
594 p->max_samples = DEF_LOG_ENTRIES;
595 p->log = calloc(p->max_samples, log_entry_sz(l));
600 l->log_ddir_mask = LOG_OFFSET_SAMPLE_BIT;
602 INIT_FLIST_HEAD(&l->chunk_list);
604 if (l->log_gz && !p->td)
606 else if (l->log_gz || l->log_gz_store) {
607 mutex_init_pshared(&l->chunk_lock);
608 p->td->flags |= TD_F_COMPRESS_LOG;
614 #ifdef CONFIG_SETVBUF
615 static void *set_file_buffer(FILE *f)
617 size_t size = 1048576;
621 setvbuf(f, buf, _IOFBF, size);
625 static void clear_file_buffer(void *buf)
630 static void *set_file_buffer(FILE *f)
635 static void clear_file_buffer(void *buf)
640 void free_log(struct io_log *log)
642 while (!flist_empty(&log->io_logs)) {
643 struct io_logs *cur_log;
645 cur_log = flist_first_entry(&log->io_logs, struct io_logs, list);
646 flist_del_init(&cur_log->list);
651 free(log->pending->log);
661 void flush_samples(FILE *f, void *samples, uint64_t sample_size)
665 uint64_t i, nr_samples;
670 s = __get_sample(samples, 0, 0);
671 log_offset = (s->__ddir & LOG_OFFSET_SAMPLE_BIT) != 0;
673 nr_samples = sample_size / __log_entry_sz(log_offset);
675 for (i = 0; i < nr_samples; i++) {
676 s = __get_sample(samples, log_offset, i);
679 fprintf(f, "%lu, %lu, %u, %u\n",
680 (unsigned long) s->time,
681 (unsigned long) s->val,
682 io_sample_ddir(s), s->bs);
684 struct io_sample_offset *so = (void *) s;
686 fprintf(f, "%lu, %lu, %u, %u, %llu\n",
687 (unsigned long) s->time,
688 (unsigned long) s->val,
689 io_sample_ddir(s), s->bs,
690 (unsigned long long) so->offset);
697 struct iolog_flush_data {
698 struct workqueue_work work;
705 #define GZ_CHUNK 131072
707 static struct iolog_compress *get_new_chunk(unsigned int seq)
709 struct iolog_compress *c;
711 c = malloc(sizeof(*c));
712 INIT_FLIST_HEAD(&c->list);
713 c->buf = malloc(GZ_CHUNK);
719 static void free_chunk(struct iolog_compress *ic)
725 static int z_stream_init(z_stream *stream, int gz_hdr)
729 memset(stream, 0, sizeof(*stream));
730 stream->zalloc = Z_NULL;
731 stream->zfree = Z_NULL;
732 stream->opaque = Z_NULL;
733 stream->next_in = Z_NULL;
736 * zlib magic - add 32 for auto-detection of gz header or not,
737 * if we decide to store files in a gzip friendly format.
742 if (inflateInit2(stream, wbits) != Z_OK)
748 struct inflate_chunk_iter {
757 static void finish_chunk(z_stream *stream, FILE *f,
758 struct inflate_chunk_iter *iter)
762 ret = inflateEnd(stream);
764 log_err("fio: failed to end log inflation seq %d (%d)\n",
767 flush_samples(f, iter->buf, iter->buf_used);
770 iter->buf_size = iter->buf_used = 0;
774 * Iterative chunk inflation. Handles cases where we cross into a new
775 * sequence, doing flush finish of previous chunk if needed.
777 static size_t inflate_chunk(struct iolog_compress *ic, int gz_hdr, FILE *f,
778 z_stream *stream, struct inflate_chunk_iter *iter)
782 dprint(FD_COMPRESS, "inflate chunk size=%lu, seq=%u\n",
783 (unsigned long) ic->len, ic->seq);
785 if (ic->seq != iter->seq) {
787 finish_chunk(stream, f, iter);
789 z_stream_init(stream, gz_hdr);
793 stream->avail_in = ic->len;
794 stream->next_in = ic->buf;
796 if (!iter->buf_size) {
797 iter->buf_size = iter->chunk_sz;
798 iter->buf = malloc(iter->buf_size);
801 while (stream->avail_in) {
802 size_t this_out = iter->buf_size - iter->buf_used;
805 stream->avail_out = this_out;
806 stream->next_out = iter->buf + iter->buf_used;
808 err = inflate(stream, Z_NO_FLUSH);
810 log_err("fio: failed inflating log: %d\n", err);
815 iter->buf_used += this_out - stream->avail_out;
817 if (!stream->avail_out) {
818 iter->buf_size += iter->chunk_sz;
819 iter->buf = realloc(iter->buf, iter->buf_size);
823 if (err == Z_STREAM_END)
827 ret = (void *) stream->next_in - ic->buf;
829 dprint(FD_COMPRESS, "inflated to size=%lu\n", (unsigned long) iter->buf_size);
835 * Inflate stored compressed chunks, or write them directly to the log
836 * file if so instructed.
838 static int inflate_gz_chunks(struct io_log *log, FILE *f)
840 struct inflate_chunk_iter iter = { .chunk_sz = log->log_gz, };
843 while (!flist_empty(&log->chunk_list)) {
844 struct iolog_compress *ic;
846 ic = flist_first_entry(&log->chunk_list, struct iolog_compress, list);
847 flist_del(&ic->list);
849 if (log->log_gz_store) {
852 dprint(FD_COMPRESS, "log write chunk size=%lu, "
853 "seq=%u\n", (unsigned long) ic->len, ic->seq);
855 ret = fwrite(ic->buf, ic->len, 1, f);
856 if (ret != 1 || ferror(f)) {
858 log_err("fio: error writing compressed log\n");
861 inflate_chunk(ic, log->log_gz_store, f, &stream, &iter);
867 finish_chunk(&stream, f, &iter);
875 * Open compressed log file and decompress the stored chunks and
876 * write them to stdout. The chunks are stored sequentially in the
877 * file, so we iterate over them and do them one-by-one.
879 int iolog_file_inflate(const char *file)
881 struct inflate_chunk_iter iter = { .chunk_sz = 64 * 1024 * 1024, };
882 struct iolog_compress ic;
890 f = fopen(file, "r");
896 if (stat(file, &sb) < 0) {
902 ic.buf = buf = malloc(sb.st_size);
906 ret = fread(ic.buf, ic.len, 1, f);
912 } else if (ret != 1) {
913 log_err("fio: short read on reading log\n");
922 * Each chunk will return Z_STREAM_END. We don't know how many
923 * chunks are in the file, so we just keep looping and incrementing
924 * the sequence number until we have consumed the whole compressed
931 iret = inflate_chunk(&ic, 1, stdout, &stream, &iter);
944 finish_chunk(&stream, stdout, &iter);
954 static int inflate_gz_chunks(struct io_log *log, FILE *f)
959 int iolog_file_inflate(const char *file)
961 log_err("fio: log inflation not possible without zlib\n");
967 void flush_log(struct io_log *log, int do_append)
973 f = fopen(log->filename, "w");
975 f = fopen(log->filename, "a");
981 buf = set_file_buffer(f);
983 inflate_gz_chunks(log, f);
985 while (!flist_empty(&log->io_logs)) {
986 struct io_logs *cur_log;
988 cur_log = flist_first_entry(&log->io_logs, struct io_logs, list);
989 flist_del_init(&cur_log->list);
990 flush_samples(f, cur_log->log, cur_log->nr_samples * log_entry_sz(log));
995 clear_file_buffer(buf);
998 static int finish_log(struct thread_data *td, struct io_log *log, int trylock)
1000 if (td->flags & TD_F_COMPRESS_LOG)
1004 if (fio_trylock_file(log->filename))
1007 fio_lock_file(log->filename);
1009 if (td->client_type == FIO_CLIENT_TYPE_GUI || is_backend)
1010 fio_send_iolog(td, log, log->filename);
1012 flush_log(log, !td->o.per_job_logs);
1014 fio_unlock_file(log->filename);
1019 size_t log_chunk_sizes(struct io_log *log)
1021 struct flist_head *entry;
1024 if (flist_empty(&log->chunk_list))
1028 pthread_mutex_lock(&log->chunk_lock);
1029 flist_for_each(entry, &log->chunk_list) {
1030 struct iolog_compress *c;
1032 c = flist_entry(entry, struct iolog_compress, list);
1035 pthread_mutex_unlock(&log->chunk_lock);
1041 static int gz_work(struct iolog_flush_data *data)
1043 struct iolog_compress *c = NULL;
1044 struct flist_head list;
1050 INIT_FLIST_HEAD(&list);
1052 memset(&stream, 0, sizeof(stream));
1053 stream.zalloc = Z_NULL;
1054 stream.zfree = Z_NULL;
1055 stream.opaque = Z_NULL;
1057 ret = deflateInit(&stream, Z_DEFAULT_COMPRESSION);
1059 log_err("fio: failed to init gz stream\n");
1063 seq = ++data->log->chunk_seq;
1065 stream.next_in = (void *) data->samples;
1066 stream.avail_in = data->nr_samples * log_entry_sz(data->log);
1068 dprint(FD_COMPRESS, "deflate input size=%lu, seq=%u, log=%s\n",
1069 (unsigned long) stream.avail_in, seq,
1070 data->log->filename);
1073 dprint(FD_COMPRESS, "seq=%d, chunk=%lu\n", seq, c->len);
1074 c = get_new_chunk(seq);
1075 stream.avail_out = GZ_CHUNK;
1076 stream.next_out = c->buf;
1077 ret = deflate(&stream, Z_NO_FLUSH);
1079 log_err("fio: deflate log (%d)\n", ret);
1084 c->len = GZ_CHUNK - stream.avail_out;
1085 flist_add_tail(&c->list, &list);
1087 } while (stream.avail_in);
1089 stream.next_out = c->buf + c->len;
1090 stream.avail_out = GZ_CHUNK - c->len;
1092 ret = deflate(&stream, Z_FINISH);
1095 * Z_BUF_ERROR is special, it just means we need more
1096 * output space. We'll handle that below. Treat any other
1099 if (ret != Z_BUF_ERROR) {
1100 log_err("fio: deflate log (%d)\n", ret);
1101 flist_del(&c->list);
1108 c->len = GZ_CHUNK - stream.avail_out;
1110 dprint(FD_COMPRESS, "seq=%d, chunk=%lu\n", seq, c->len);
1112 if (ret != Z_STREAM_END) {
1114 c = get_new_chunk(seq);
1115 stream.avail_out = GZ_CHUNK;
1116 stream.next_out = c->buf;
1117 ret = deflate(&stream, Z_FINISH);
1118 c->len = GZ_CHUNK - stream.avail_out;
1120 flist_add_tail(&c->list, &list);
1121 dprint(FD_COMPRESS, "seq=%d, chunk=%lu\n", seq, c->len);
1122 } while (ret != Z_STREAM_END);
1125 dprint(FD_COMPRESS, "deflated to size=%lu\n", (unsigned long) total);
1127 ret = deflateEnd(&stream);
1129 log_err("fio: deflateEnd %d\n", ret);
1131 free(data->samples);
1133 if (!flist_empty(&list)) {
1134 pthread_mutex_lock(&data->log->chunk_lock);
1135 flist_splice_tail(&list, &data->log->chunk_list);
1136 pthread_mutex_unlock(&data->log->chunk_lock);
1145 while (!flist_empty(&list)) {
1146 c = flist_first_entry(list.next, struct iolog_compress, list);
1147 flist_del(&c->list);
1155 * Invoked from our compress helper thread, when logging would have exceeded
1156 * the specified memory limitation. Compresses the previously stored
1159 static int gz_work_async(struct submit_worker *sw, struct workqueue_work *work)
1161 return gz_work(container_of(work, struct iolog_flush_data, work));
1164 static int gz_init_worker(struct submit_worker *sw)
1166 struct thread_data *td = sw->wq->td;
1168 if (!fio_option_is_set(&td->o, log_gz_cpumask))
1171 if (fio_setaffinity(gettid(), td->o.log_gz_cpumask) == -1) {
1172 log_err("gz: failed to set CPU affinity\n");
1179 static struct workqueue_ops log_compress_wq_ops = {
1180 .fn = gz_work_async,
1181 .init_worker_fn = gz_init_worker,
1185 int iolog_compress_init(struct thread_data *td, struct sk_out *sk_out)
1187 if (!(td->flags & TD_F_COMPRESS_LOG))
1190 workqueue_init(td, &td->log_compress_wq, &log_compress_wq_ops, 1, sk_out);
1194 void iolog_compress_exit(struct thread_data *td)
1196 if (!(td->flags & TD_F_COMPRESS_LOG))
1199 workqueue_exit(&td->log_compress_wq);
1203 * Queue work item to compress the existing log entries. We reset the
1204 * current log to a small size, and reference the existing log in the
1205 * data that we queue for compression. Once compression has been done,
1206 * this old log is freed. If called with finish == true, will not return
1207 * until the log compression has completed, and will flush all previous
1210 static int iolog_flush(struct io_log *log)
1212 struct iolog_flush_data *data;
1214 data = malloc(sizeof(*data));
1221 while (!flist_empty(&log->io_logs)) {
1222 struct io_logs *cur_log;
1224 cur_log = flist_first_entry(&log->io_logs, struct io_logs, list);
1225 flist_del_init(&cur_log->list);
1227 data->samples = cur_log->log;
1228 data->nr_samples = cur_log->nr_samples;
1230 cur_log->nr_samples = 0;
1231 cur_log->max_samples = 0;
1232 cur_log->log = NULL;
1241 int iolog_cur_flush(struct io_log *log, struct io_logs *cur_log)
1243 struct iolog_flush_data *data;
1245 data = malloc(sizeof(*data));
1251 data->samples = cur_log->log;
1252 data->nr_samples = cur_log->nr_samples;
1255 cur_log->nr_samples = cur_log->max_samples = 0;
1256 cur_log->log = NULL;
1258 workqueue_enqueue(&log->td->log_compress_wq, &data->work);
1263 static int iolog_flush(struct io_log *log)
1268 int iolog_cur_flush(struct io_log *log, struct io_logs *cur_log)
1273 int iolog_compress_init(struct thread_data *td, struct sk_out *sk_out)
1278 void iolog_compress_exit(struct thread_data *td)
1284 struct io_logs *iolog_cur_log(struct io_log *log)
1286 if (flist_empty(&log->io_logs))
1289 return flist_last_entry(&log->io_logs, struct io_logs, list);
1292 uint64_t iolog_nr_samples(struct io_log *iolog)
1294 struct flist_head *entry;
1297 flist_for_each(entry, &iolog->io_logs) {
1298 struct io_logs *cur_log;
1300 cur_log = flist_entry(entry, struct io_logs, list);
1301 ret += cur_log->nr_samples;
1307 static int __write_log(struct thread_data *td, struct io_log *log, int try)
1310 return finish_log(td, log, try);
1315 static int write_iops_log(struct thread_data *td, int try, bool unit_log)
1319 if (per_unit_log(td->iops_log) != unit_log)
1322 ret = __write_log(td, td->iops_log, try);
1324 td->iops_log = NULL;
1329 static int write_slat_log(struct thread_data *td, int try, bool unit_log)
1336 ret = __write_log(td, td->slat_log, try);
1338 td->slat_log = NULL;
1343 static int write_clat_log(struct thread_data *td, int try, bool unit_log)
1350 ret = __write_log(td, td->clat_log, try);
1352 td->clat_log = NULL;
1357 static int write_lat_log(struct thread_data *td, int try, bool unit_log)
1364 ret = __write_log(td, td->lat_log, try);
1371 static int write_bandw_log(struct thread_data *td, int try, bool unit_log)
1375 if (per_unit_log(td->bw_log) != unit_log)
1378 ret = __write_log(td, td->bw_log, try);
1397 int (*fn)(struct thread_data *, int, bool);
1400 static struct log_type log_types[] = {
1402 .mask = BW_LOG_MASK,
1403 .fn = write_bandw_log,
1406 .mask = LAT_LOG_MASK,
1407 .fn = write_lat_log,
1410 .mask = SLAT_LOG_MASK,
1411 .fn = write_slat_log,
1414 .mask = CLAT_LOG_MASK,
1415 .fn = write_clat_log,
1418 .mask = IOPS_LOG_MASK,
1419 .fn = write_iops_log,
1423 void td_writeout_logs(struct thread_data *td, bool unit_logs)
1425 unsigned int log_mask = 0;
1426 unsigned int log_left = ALL_LOG_NR;
1429 old_state = td_bump_runstate(td, TD_FINISHING);
1431 finalize_logs(td, unit_logs);
1434 int prev_log_left = log_left;
1436 for (i = 0; i < ALL_LOG_NR && log_left; i++) {
1437 struct log_type *lt = &log_types[i];
1440 if (!(log_mask & lt->mask)) {
1441 ret = lt->fn(td, log_left != 1, unit_logs);
1444 log_mask |= lt->mask;
1449 if (prev_log_left == log_left)
1453 td_restore_runstate(td, old_state);
1456 void fio_writeout_logs(bool unit_logs)
1458 struct thread_data *td;
1462 td_writeout_logs(td, unit_logs);