projects / fio.git / blame
| Commit | Line | Data |
|---|---|---|
| 191d1d1a BVA |
1 | #!/bin/bash |
| 2 | # | |
| 3 | # Copyright (C) 2018 Western Digital Corporation or its affiliates. | |
| 4 | # | |
| 5 | # This file is released under the GPL. | |
| 6 | ||
| 7 | usage() { | |
| 6dcb098d | 8 | echo "Usage: $(basename "$0") [-d] [-e] [-l] [-r] [-v] [-t <test>] [-z] <SMR drive device node>" |
| 191d1d1a BVA |
9 | } |
| 10 | ||
| 11 | max() { | |
| 12 | if [ "$1" -gt "$2" ]; then | |
| 13 | echo "$1" | |
| 14 | else | |
| 15 | echo "$2" | |
| 16 | fi | |
| 17 | } | |
| 18 | ||
| 19 | min() { | |
| 20 | if [ "$1" -lt "$2" ]; then | |
| 21 | echo "$1" | |
| 22 | else | |
| 23 | echo "$2" | |
| 24 | fi | |
| 25 | } | |
| 26 | ||
| 6dcb098d DF |
27 | ioengine() { |
| 28 | if [ -n "$use_libzbc" ]; then | |
| 29 | echo -n "--ioengine=libzbc" | |
| 30 | else | |
| 31 | echo -n "--ioengine=$1" | |
| 32 | fi | |
| 33 | } | |
| 34 | ||
| 191d1d1a BVA |
35 | set_io_scheduler() { |
| 36 | local dev=$1 sched=$2 | |
| 37 | ||
| 38 | [ -e "/sys/block/$dev" ] || return $? | |
| 39 | if [ -e "/sys/block/$dev/mq" ]; then | |
| 40 | case "$sched" in | |
| 41 | noop) sched=none;; | |
| 42 | deadline) sched=mq-deadline;; | |
| 43 | esac | |
| 44 | else | |
| 45 | case "$sched" in | |
| 46 | none) sched=noop;; | |
| 47 | mq-deadline) sched=deadline;; | |
| 48 | esac | |
| 49 | fi | |
| 50 | ||
| 51 | echo "$sched" >"/sys/block/$dev/queue/scheduler" | |
| 52 | } | |
| 53 | ||
| 54 | check_read() { | |
| 55 | local read | |
| 56 | ||
| 57 | read=$(fio_read <"${logfile}.${test_number}") | |
| 58 | echo "read: $read <> $1" >> "${logfile}.${test_number}" | |
| 59 | [ "$read" = "$1" ] | |
| 60 | } | |
| 61 | ||
| 62 | check_written() { | |
| 63 | local written | |
| 64 | ||
| 65 | written=$(fio_written <"${logfile}.${test_number}") | |
| 66 | echo "written: $written <> $1" >> "${logfile}.${test_number}" | |
| 67 | [ "$written" = "$1" ] | |
| 68 | } | |
| 69 | ||
| 70 | # Compare the reset count from the log file with reset count $2 using operator | |
| 71 | # $1 (=, -ge, -gt, -le, -lt). | |
| 72 | check_reset_count() { | |
| 73 | local reset_count | |
| 74 | ||
| 75 | reset_count=$(fio_reset_count <"${logfile}.${test_number}") | |
| 76 | echo "reset_count: test $reset_count $1 $2" >> "${logfile}.${test_number}" | |
| 77 | eval "[ '$reset_count' '$1' '$2' ]" | |
| 78 | } | |
| 79 | ||
| 80 | # Whether or not $1 (/dev/...) is a SCSI device. | |
| 81 | is_scsi_device() { | |
| 82 | local d f | |
| 83 | ||
| 84 | d=$(basename "$dev") | |
| 85 | for f in /sys/class/scsi_device/*/device/block/"$d"; do | |
| 86 | [ -e "$f" ] && return 0 | |
| 87 | done | |
| 88 | return 1 | |
| 89 | } | |
| 90 | ||
| 91 | run_fio() { | |
| 97e41ee4 | 92 | local fio opts |
| 191d1d1a BVA |
93 | |
| 94 | fio=$(dirname "$0")/../../fio | |
| 95 | ||
| fc3bf67a DLM |
96 | opts=("--max-jobs=16" "--aux-path=/tmp" "--allow_file_create=0" \ |
| 97 | "--significant_figures=10" "$@") | |
| 6dcb098d | 98 | opts+=(${var_opts[@]}) |
| 97e41ee4 | 99 | { echo; echo "fio ${opts[*]}"; echo; } >>"${logfile}.${test_number}" |
| 191d1d1a | 100 | |
| 97e41ee4 | 101 | "${dynamic_analyzer[@]}" "$fio" "${opts[@]}" |
| 191d1d1a BVA |
102 | } |
| 103 | ||
| 104 | run_one_fio_job() { | |
| 105 | local r | |
| 106 | ||
| 107 | r=$(((RANDOM << 16) | RANDOM)) | |
| 108 | run_fio --name="$dev" --filename="$dev" "$@" --randseed="$r" \ | |
| 109 | --thread=1 --direct=1 | |
| 110 | } | |
| 111 | ||
| 112 | # Run fio on the first four sequential zones of the disk. | |
| 113 | run_fio_on_seq() { | |
| 114 | local opts=() | |
| 115 | ||
| 116 | opts+=("--offset=$((first_sequential_zone_sector * 512))") | |
| 117 | opts+=("--size=$((4 * zone_size))" "--zonemode=zbd") | |
| 118 | if [ -z "$is_zbd" ]; then | |
| 119 | opts+=("--zonesize=${zone_size}") | |
| 120 | fi | |
| 121 | run_one_fio_job "${opts[@]}" "$@" | |
| 122 | } | |
| 123 | ||
| 124 | # Check whether buffered writes are refused. | |
| 125 | test1() { | |
| 126 | run_fio --name=job1 --filename="$dev" --rw=write --direct=0 --bs=4K \ | |
| 6dcb098d | 127 | "$(ioengine "psync")" --size="${zone_size}" --thread=1 \ |
| 191d1d1a BVA |
128 | --zonemode=zbd --zonesize="${zone_size}" 2>&1 | |
| 129 | tee -a "${logfile}.${test_number}" | | |
| 130 | grep -q 'Using direct I/O is mandatory for writing to ZBD drives' | |
| 131 | local fio_rc=${PIPESTATUS[0]} grep_rc=${PIPESTATUS[2]} | |
| 132 | case "$fio_rc" in | |
| 133 | 0|1) ;; | |
| 134 | *) return "$fio_rc" | |
| 135 | esac | |
| 136 | if [ -n "$is_zbd" ]; then | |
| 137 | [ "$grep_rc" = 0 ] | |
| 138 | else | |
| 139 | [ "$grep_rc" != 0 ] | |
| 140 | fi | |
| 141 | } | |
| 142 | ||
| 143 | # Block size exceeds zone size. | |
| 144 | test2() { | |
| 145 | local bs off opts=() rc | |
| 146 | ||
| 147 | off=$(((first_sequential_zone_sector + 2 * sectors_per_zone) * 512)) | |
| 148 | bs=$((2 * zone_size)) | |
| 6dcb098d | 149 | opts+=("$(ioengine "psync")") |
| 191d1d1a BVA |
150 | opts+=("--name=job1" "--filename=$dev" "--rw=write" "--direct=1") |
| 151 | opts+=("--zonemode=zbd" "--offset=$off" "--bs=$bs" "--size=$bs") | |
| 152 | if [ -z "$is_zbd" ]; then | |
| 153 | opts+=("--zonesize=${zone_size}") | |
| 154 | fi | |
| f572c8f6 DLM |
155 | run_fio "${opts[@]}" >> "${logfile}.${test_number}" 2>&1 || return $? |
| 156 | ! grep -q 'WRITE:' "${logfile}.${test_number}" | |
| 191d1d1a BVA |
157 | } |
| 158 | ||
| 159 | # Run fio against an empty zone. This causes fio to report "No I/O performed". | |
| 160 | test3() { | |
| 161 | local off opts=() rc | |
| 162 | ||
| 163 | off=$((first_sequential_zone_sector * 512 + 128 * zone_size)) | |
| 164 | size=$((zone_size)) | |
| 165 | [ -n "$is_zbd" ] && reset_zone "$dev" $((off / 512)) | |
| 166 | opts+=("--name=$dev" "--filename=$dev" "--offset=$off" "--bs=4K") | |
| 167 | opts+=("--size=$size" "--zonemode=zbd") | |
| 6dcb098d | 168 | opts+=("$(ioengine "psync")" "--rw=read" "--direct=1" "--thread=1") |
| 191d1d1a BVA |
169 | if [ -z "$is_zbd" ]; then |
| 170 | opts+=("--zonesize=${zone_size}") | |
| 171 | fi | |
| 172 | run_fio "${opts[@]}" >> "${logfile}.${test_number}" 2>&1 || return $? | |
| f572c8f6 | 173 | grep -q 'READ:' "${logfile}.${test_number}" |
| 191d1d1a BVA |
174 | rc=$? |
| 175 | if [ -n "$is_zbd" ]; then | |
| 191d1d1a | 176 | [ $rc != 0 ] |
| f572c8f6 DLM |
177 | else |
| 178 | [ $rc = 0 ] | |
| 191d1d1a BVA |
179 | fi |
| 180 | } | |
| 181 | ||
| 182 | # Run fio with --read_beyond_wp=1 against an empty zone. | |
| 183 | test4() { | |
| 184 | local off opts=() | |
| 185 | ||
| 186 | off=$((first_sequential_zone_sector * 512 + 129 * zone_size)) | |
| 187 | size=$((zone_size)) | |
| 188 | [ -n "$is_zbd" ] && reset_zone "$dev" $((off / 512)) | |
| 189 | opts+=("--name=$dev" "--filename=$dev" "--offset=$off" "--bs=$size") | |
| 190 | opts+=("--size=$size" "--thread=1" "--read_beyond_wp=1") | |
| 6dcb098d | 191 | opts+=("$(ioengine "psync")" "--rw=read" "--direct=1" "--disable_lat=1") |
| 191d1d1a BVA |
192 | opts+=("--zonemode=zbd" "--zonesize=${zone_size}") |
| 193 | run_fio "${opts[@]}" >> "${logfile}.${test_number}" 2>&1 || return $? | |
| 194 | check_read $size || return $? | |
| 195 | } | |
| 196 | ||
| 197 | # Sequential write to sequential zones. | |
| 198 | test5() { | |
| 199 | local size | |
| 200 | ||
| 201 | size=$((4 * zone_size)) | |
| 6dcb098d | 202 | run_fio_on_seq "$(ioengine "psync")" --iodepth=1 --rw=write \ |
| 191d1d1a BVA |
203 | --bs="$(max $((zone_size / 64)) "$logical_block_size")"\ |
| 204 | --do_verify=1 --verify=md5 \ | |
| 205 | >>"${logfile}.${test_number}" 2>&1 || return $? | |
| 206 | check_written $size || return $? | |
| 207 | check_read $size || return $? | |
| 208 | } | |
| 209 | ||
| 210 | # Sequential read from sequential zones. Must be run after test5. | |
| 211 | test6() { | |
| 212 | local size | |
| 213 | ||
| 214 | size=$((4 * zone_size)) | |
| 6dcb098d | 215 | run_fio_on_seq "$(ioengine "psync")" --iodepth=1 --rw=read \ |
| 191d1d1a BVA |
216 | --bs="$(max $((zone_size / 64)) "$logical_block_size")"\ |
| 217 | >>"${logfile}.${test_number}" 2>&1 || return $? | |
| 218 | check_read $size || return $? | |
| 219 | } | |
| 220 | ||
| 221 | # Random write to sequential zones, libaio, queue depth 1. | |
| 222 | test7() { | |
| 223 | local size=$((zone_size)) | |
| 224 | ||
| 6dcb098d | 225 | run_fio_on_seq "$(ioengine "libaio")" --iodepth=1 --rw=randwrite \ |
| 191d1d1a BVA |
226 | --bs="$(min 16384 "${zone_size}")" \ |
| 227 | --do_verify=1 --verify=md5 --size="$size" \ | |
| 228 | >>"${logfile}.${test_number}" 2>&1 || return $? | |
| 229 | check_written $size || return $? | |
| 230 | check_read $size || return $? | |
| 231 | } | |
| 232 | ||
| 233 | # Random write to sequential zones, libaio, queue depth 64. | |
| 234 | test8() { | |
| 235 | local size | |
| 236 | ||
| 237 | size=$((4 * zone_size)) | |
| 6dcb098d | 238 | run_fio_on_seq "$(ioengine "libaio")" --iodepth=64 --rw=randwrite \ |
| 191d1d1a BVA |
239 | --bs="$(min 16384 "${zone_size}")" \ |
| 240 | --do_verify=1 --verify=md5 \ | |
| 241 | >>"${logfile}.${test_number}" 2>&1 || return $? | |
| 242 | check_written $size || return $? | |
| 243 | check_read $size || return $? | |
| 244 | } | |
| 245 | ||
| 246 | # Random write to sequential zones, sg, queue depth 1. | |
| 247 | test9() { | |
| 248 | local size | |
| 249 | ||
| 250 | if ! is_scsi_device "$dev"; then | |
| 251 | echo "$dev is not a SCSI device" >>"${logfile}.${test_number}" | |
| 252 | return 0 | |
| 253 | fi | |
| 254 | ||
| 255 | size=$((4 * zone_size)) | |
| 6dcb098d DF |
256 | run_fio_on_seq --ioengine=sg \ |
| 257 | --iodepth=1 --rw=randwrite --bs=16K \ | |
| 191d1d1a BVA |
258 | --do_verify=1 --verify=md5 \ |
| 259 | >>"${logfile}.${test_number}" 2>&1 || return $? | |
| 260 | check_written $size || return $? | |
| 261 | check_read $size || return $? | |
| 262 | } | |
| 263 | ||
| 264 | # Random write to sequential zones, sg, queue depth 64. | |
| 265 | test10() { | |
| 266 | local size | |
| 267 | ||
| 268 | if ! is_scsi_device "$dev"; then | |
| 269 | echo "$dev is not a SCSI device" >>"${logfile}.${test_number}" | |
| 270 | return 0 | |
| 271 | fi | |
| 272 | ||
| 273 | size=$((4 * zone_size)) | |
| 6dcb098d DF |
274 | run_fio_on_seq --ioengine=sg \ |
| 275 | --iodepth=64 --rw=randwrite --bs=16K \ | |
| 191d1d1a BVA |
276 | --do_verify=1 --verify=md5 \ |
| 277 | >>"${logfile}.${test_number}" 2>&1 || return $? | |
| 278 | check_written $size || return $? | |
| 279 | check_read $size || return $? | |
| 280 | } | |
| 281 | ||
| 282 | # Random write to sequential zones, libaio, queue depth 64, random block size. | |
| 283 | test11() { | |
| 284 | local size | |
| 285 | ||
| 286 | size=$((4 * zone_size)) | |
| 6dcb098d | 287 | run_fio_on_seq "$(ioengine "libaio")" --iodepth=64 --rw=randwrite \ |
| 191d1d1a BVA |
288 | --bsrange=4K-64K --do_verify=1 --verify=md5 \ |
| 289 | --debug=zbd >>"${logfile}.${test_number}" 2>&1 || return $? | |
| 290 | check_written $size || return $? | |
| 291 | check_read $size || return $? | |
| 292 | } | |
| 293 | ||
| 294 | # Random write to sequential zones, libaio, queue depth 64, max 1 open zone. | |
| 295 | test12() { | |
| 296 | local size | |
| 297 | ||
| 298 | size=$((8 * zone_size)) | |
| 6dcb098d | 299 | run_fio_on_seq "$(ioengine "libaio")" --iodepth=64 --rw=randwrite --bs=16K \ |
| 191d1d1a BVA |
300 | --max_open_zones=1 --size=$size --do_verify=1 --verify=md5 \ |
| 301 | --debug=zbd >>"${logfile}.${test_number}" 2>&1 || return $? | |
| 302 | check_written $size || return $? | |
| 303 | check_read $size || return $? | |
| 304 | } | |
| 305 | ||
| 306 | # Random write to sequential zones, libaio, queue depth 64, max 4 open zones. | |
| 307 | test13() { | |
| 308 | local size | |
| 309 | ||
| 310 | size=$((8 * zone_size)) | |
| 6dcb098d | 311 | run_fio_on_seq "$(ioengine "libaio")" --iodepth=64 --rw=randwrite --bs=16K \ |
| 191d1d1a BVA |
312 | --max_open_zones=4 --size=$size --do_verify=1 --verify=md5 \ |
| 313 | --debug=zbd \ | |
| 314 | >>"${logfile}.${test_number}" 2>&1 || return $? | |
| 315 | check_written $size || return $? | |
| 316 | check_read $size || return $? | |
| 317 | } | |
| 318 | ||
| 319 | # Random write to conventional zones. | |
| 320 | test14() { | |
| 321 | local size | |
| 322 | ||
| 323 | size=$((16 * 2**20)) # 20 MB | |
| 324 | if [ $size -gt $((first_sequential_zone_sector * 512)) ]; then | |
| 325 | echo "$dev does not have enough sequential zones" \ | |
| 326 | >>"${logfile}.${test_number}" | |
| 327 | return 0 | |
| 328 | fi | |
| 6dcb098d | 329 | run_one_fio_job "$(ioengine "libaio")" --iodepth=64 --rw=randwrite --bs=16K \ |
| 191d1d1a BVA |
330 | --zonemode=zbd --zonesize="${zone_size}" --do_verify=1 \ |
| 331 | --verify=md5 --size=$size \ | |
| 332 | >>"${logfile}.${test_number}" 2>&1 || return $? | |
| 333 | check_written $((size)) || return $? | |
| 334 | check_read $((size)) || return $? | |
| 335 | } | |
| 336 | ||
| 337 | # Sequential read on a mix of empty and full zones. | |
| 338 | test15() { | |
| 339 | local i off size | |
| 340 | ||
| 341 | for ((i=0;i<4;i++)); do | |
| 342 | [ -n "$is_zbd" ] && | |
| 343 | reset_zone "$dev" $((first_sequential_zone_sector + | |
| 344 | i*sectors_per_zone)) | |
| 345 | done | |
| 346 | off=$(((first_sequential_zone_sector + 2 * sectors_per_zone) * 512)) | |
| 347 | size=$((2 * zone_size)) | |
| 6dcb098d | 348 | run_one_fio_job "$(ioengine "psync")" --rw=write --bs=$((zone_size / 16))\ |
| 191d1d1a BVA |
349 | --zonemode=zbd --zonesize="${zone_size}" --offset=$off \ |
| 350 | --size=$size >>"${logfile}.${test_number}" 2>&1 || | |
| 351 | return $? | |
| 352 | check_written $size || return $? | |
| 353 | off=$((first_sequential_zone_sector * 512)) | |
| 354 | size=$((4 * zone_size)) | |
| 6dcb098d | 355 | run_one_fio_job "$(ioengine "psync")" --rw=read --bs=$((zone_size / 16)) \ |
| 191d1d1a BVA |
356 | --zonemode=zbd --zonesize="${zone_size}" --offset=$off \ |
| 357 | --size=$((size)) >>"${logfile}.${test_number}" 2>&1 || | |
| 358 | return $? | |
| 359 | if [ -n "$is_zbd" ]; then | |
| 360 | check_read $((size / 2)) | |
| 361 | else | |
| 362 | check_read $size | |
| 363 | fi | |
| 364 | } | |
| 365 | ||
| 366 | # Random read on a mix of empty and full zones. Must be run after test15. | |
| 367 | test16() { | |
| 368 | local off size | |
| 369 | ||
| 370 | off=$((first_sequential_zone_sector * 512)) | |
| 371 | size=$((4 * zone_size)) | |
| 6dcb098d | 372 | run_one_fio_job "$(ioengine "libaio")" --iodepth=64 --rw=randread --bs=16K \ |
| 191d1d1a BVA |
373 | --zonemode=zbd --zonesize="${zone_size}" --offset=$off \ |
| 374 | --size=$size >>"${logfile}.${test_number}" 2>&1 || return $? | |
| 375 | check_read $size || return $? | |
| 376 | } | |
| 377 | ||
| 378 | # Random reads and writes in the last zone. | |
| 379 | test17() { | |
| 380 | local io off read size written | |
| 381 | ||
| 382 | off=$(((disk_size / zone_size - 1) * zone_size)) | |
| 383 | size=$((disk_size - off)) | |
| 384 | # Overwrite the last zone to avoid that reading from that zone fails. | |
| 385 | if [ -n "$is_zbd" ]; then | |
| 386 | reset_zone "$dev" $((off / 512)) || return $? | |
| 387 | fi | |
| 6dcb098d | 388 | run_one_fio_job "$(ioengine "psync")" --rw=write --offset="$off" \ |
| 191d1d1a BVA |
389 | --zonemode=zbd --zonesize="${zone_size}" \ |
| 390 | --bs="$zone_size" --size="$zone_size" \ | |
| 391 | >>"${logfile}.${test_number}" 2>&1 || return $? | |
| 392 | check_written "$zone_size" || return $? | |
| 6dcb098d | 393 | run_one_fio_job "$(ioengine "libaio")" --iodepth=8 --rw=randrw --bs=4K \ |
| 191d1d1a BVA |
394 | --zonemode=zbd --zonesize="${zone_size}" \ |
| 395 | --offset=$off --loops=2 --norandommap=1\ | |
| 396 | >>"${logfile}.${test_number}" 2>&1 || return $? | |
| 397 | written=$(fio_written <"${logfile}.${test_number}") | |
| 398 | read=$(fio_read <"${logfile}.${test_number}") | |
| 399 | io=$((written + read)) | |
| 400 | echo "Total number of bytes read and written: $io <> $size" \ | |
| 401 | >>"${logfile}.${test_number}" | |
| 402 | [ $io = $((size * 2)) ]; | |
| 403 | } | |
| 404 | ||
| 405 | # Out-of-range zone reset threshold and frequency parameters. | |
| 406 | test18() { | |
| 407 | run_fio_on_seq --zone_reset_threshold=-1 |& | |
| 408 | tee -a "${logfile}.${test_number}" | | |
| 409 | grep -q 'value out of range' || return $? | |
| 410 | } | |
| 411 | ||
| 412 | test19() { | |
| 413 | run_fio_on_seq --zone_reset_threshold=2 |& | |
| 414 | tee -a "${logfile}.${test_number}" | | |
| 415 | grep -q 'value out of range' || return $? | |
| 416 | } | |
| 417 | ||
| 418 | test20() { | |
| 419 | run_fio_on_seq --zone_reset_threshold=.4:.6 |& | |
| 420 | tee -a "${logfile}.${test_number}" | | |
| 421 | grep -q 'the list exceeding max length' || return $? | |
| 422 | } | |
| 423 | ||
| 424 | test21() { | |
| 425 | run_fio_on_seq --zone_reset_frequency=-1 |& | |
| 426 | tee -a "${logfile}.${test_number}" | | |
| 427 | grep -q 'value out of range' || return $? | |
| 428 | } | |
| 429 | ||
| 430 | test22() { | |
| 431 | run_fio_on_seq --zone_reset_frequency=2 |& | |
| 432 | tee -a "${logfile}.${test_number}" | | |
| 433 | grep -q 'value out of range' || return $? | |
| 434 | } | |
| 435 | ||
| 436 | test23() { | |
| 437 | run_fio_on_seq --zone_reset_frequency=.4:.6 |& | |
| 438 | tee -a "${logfile}.${test_number}" | | |
| 439 | grep -q 'the list exceeding max length' || return $? | |
| 440 | } | |
| 441 | ||
| 442 | test24() { | |
| 443 | local bs loops=9 size=$((zone_size)) | |
| 444 | ||
| 445 | bs=$(min $((256*1024)) "$zone_size") | |
| 6dcb098d DF |
446 | run_fio_on_seq "$(ioengine "psync")" --rw=write --bs="$bs" \ |
| 447 | --size=$size --loops=$loops \ | |
| 191d1d1a BVA |
448 | --zone_reset_frequency=.01 --zone_reset_threshold=.90 \ |
| 449 | >> "${logfile}.${test_number}" 2>&1 || return $? | |
| 450 | check_written $((size * loops)) || return $? | |
| 451 | check_reset_count -eq 8 || | |
| 452 | check_reset_count -eq 9 || | |
| 453 | check_reset_count -eq 10 || return $? | |
| 454 | } | |
| 455 | ||
| 456 | # Multiple non-overlapping sequential write jobs for the same drive. | |
| 457 | test25() { | |
| 458 | local i opts=() | |
| 459 | ||
| 460 | for ((i=0;i<16;i++)); do | |
| 461 | [ -n "$is_zbd" ] && | |
| 462 | reset_zone "$dev" $((first_sequential_zone_sector + i*sectors_per_zone)) | |
| 463 | done | |
| 464 | for ((i=0;i<16;i++)); do | |
| 465 | opts+=("--name=job$i" "--filename=$dev" "--thread=1" "--direct=1") | |
| 466 | opts+=("--offset=$((first_sequential_zone_sector*512 + zone_size*i))") | |
| 6dcb098d | 467 | opts+=("--size=$zone_size" "$(ioengine "psync")" "--rw=write" "--bs=16K") |
| 191d1d1a | 468 | opts+=("--zonemode=zbd" "--zonesize=${zone_size}" "--group_reporting=1") |
| 6dcb098d | 469 | opts+=(${var_opts[@]}) |
| 191d1d1a BVA |
470 | done |
| 471 | run_fio "${opts[@]}" >> "${logfile}.${test_number}" 2>&1 || return $? | |
| 472 | } | |
| 473 | ||
| 474 | write_to_first_seq_zone() { | |
| 475 | local loops=4 r | |
| 476 | ||
| 477 | r=$(((RANDOM << 16) | RANDOM)) | |
| 6dcb098d | 478 | run_fio --name="$dev" --filename="$dev" "$(ioengine "psync")" --rw="$1" \ |
| 191d1d1a BVA |
479 | --thread=1 --do_verify=1 --verify=md5 --direct=1 --bs=4K \ |
| 480 | --offset=$((first_sequential_zone_sector * 512)) \ | |
| 481 | "--size=$zone_size" --loops=$loops --randseed="$r" \ | |
| 482 | --zonemode=zbd --zonesize="${zone_size}" --group_reporting=1 \ | |
| 483 | --gtod_reduce=1 >> "${logfile}.${test_number}" 2>&1 || return $? | |
| 484 | check_written $((loops * zone_size)) || return $? | |
| 485 | } | |
| 486 | ||
| 487 | # Overwrite the first sequential zone four times sequentially. | |
| 488 | test26() { | |
| 489 | write_to_first_seq_zone write | |
| 490 | } | |
| 491 | ||
| 492 | # Overwrite the first sequential zone four times using random writes. | |
| 493 | test27() { | |
| 494 | write_to_first_seq_zone randwrite | |
| 495 | } | |
| 496 | ||
| 497 | # Multiple overlapping random write jobs for the same drive. | |
| 498 | test28() { | |
| 499 | local i jobs=16 off opts | |
| 500 | ||
| 501 | off=$((first_sequential_zone_sector * 512 + 64 * zone_size)) | |
| 502 | [ -n "$is_zbd" ] && reset_zone "$dev" $((off / 512)) | |
| 503 | opts=("--debug=zbd") | |
| 504 | for ((i=0;i<jobs;i++)); do | |
| 505 | opts+=("--name=job$i" "--filename=$dev" "--offset=$off" "--bs=16K") | |
| 6dcb098d | 506 | opts+=("--size=$zone_size" "$(ioengine "psync")" "--rw=randwrite") |
| 191d1d1a BVA |
507 | opts+=("--thread=1" "--direct=1" "--zonemode=zbd") |
| 508 | opts+=("--zonesize=${zone_size}" "--group_reporting=1") | |
| 6dcb098d | 509 | opts+=(${var_opts[@]}) |
| 191d1d1a BVA |
510 | done |
| 511 | run_fio "${opts[@]}" >> "${logfile}.${test_number}" 2>&1 || return $? | |
| 512 | check_written $((jobs * zone_size)) || return $? | |
| 513 | check_reset_count -eq $jobs || | |
| 514 | check_reset_count -eq $((jobs - 1)) || | |
| 515 | return $? | |
| 516 | } | |
| 517 | ||
| 518 | # Multiple overlapping random write jobs for the same drive and with a limited | |
| 519 | # number of open zones. | |
| 520 | test29() { | |
| 521 | local i jobs=16 off opts=() | |
| 522 | ||
| 523 | off=$((first_sequential_zone_sector * 512 + 64 * zone_size)) | |
| 524 | size=$((16*zone_size)) | |
| 525 | [ -n "$is_zbd" ] && reset_zone "$dev" $((off / 512)) | |
| 526 | opts=("--debug=zbd") | |
| 527 | for ((i=0;i<jobs;i++)); do | |
| 528 | opts+=("--name=job$i" "--filename=$dev" "--offset=$off" "--bs=16K") | |
| 529 | opts+=("--size=$size" "--io_size=$zone_size" "--thread=1") | |
| 6dcb098d | 530 | opts+=("$(ioengine "psync")" "--rw=randwrite" "--direct=1") |
| 191d1d1a BVA |
531 | opts+=("--max_open_zones=4" "--group_reporting=1") |
| 532 | opts+=("--zonemode=zbd" "--zonesize=${zone_size}") | |
| 6dcb098d | 533 | opts+=(${var_opts[@]}) |
| 191d1d1a BVA |
534 | done |
| 535 | run_fio "${opts[@]}" >> "${logfile}.${test_number}" 2>&1 || return $? | |
| 536 | check_written $((jobs * zone_size)) || return $? | |
| 537 | } | |
| 538 | ||
| 539 | # Random reads and writes across the entire disk for 30s. | |
| 540 | test30() { | |
| 541 | local off | |
| 542 | ||
| 543 | off=$((first_sequential_zone_sector * 512)) | |
| 6dcb098d | 544 | run_one_fio_job "$(ioengine "libaio")" --iodepth=8 --rw=randrw \ |
| 191d1d1a BVA |
545 | --bs="$(max $((zone_size / 128)) "$logical_block_size")"\ |
| 546 | --zonemode=zbd --zonesize="${zone_size}" --offset=$off\ | |
| 547 | --loops=2 --time_based --runtime=30s --norandommap=1\ | |
| 548 | >>"${logfile}.${test_number}" 2>&1 | |
| 549 | } | |
| 550 | ||
| 551 | # Random reads across all sequential zones for 30s. This is not only a fio | |
| 552 | # test but also allows to verify the performance of a drive. | |
| 553 | test31() { | |
| 554 | local bs inc nz off opts size | |
| 555 | ||
| 556 | # Start with writing 128 KB to 128 sequential zones. | |
| 557 | bs=128K | |
| 558 | nz=128 | |
| 559 | # shellcheck disable=SC2017 | |
| 560 | inc=$(((disk_size - (first_sequential_zone_sector * 512)) / (nz * zone_size) | |
| 561 | * zone_size)) | |
| 562 | opts=() | |
| 563 | for ((off = first_sequential_zone_sector * 512; off < disk_size; | |
| 564 | off += inc)); do | |
| 565 | opts+=("--name=$dev" "--filename=$dev" "--offset=$off" "--io_size=$bs") | |
| 6dcb098d | 566 | opts+=("--bs=$bs" "--size=$zone_size" "$(ioengine "libaio")") |
| 191d1d1a BVA |
567 | opts+=("--rw=write" "--direct=1" "--thread=1" "--stats=0") |
| 568 | opts+=("--zonemode=zbd" "--zonesize=${zone_size}") | |
| 6dcb098d | 569 | opts+=(${var_opts[@]}) |
| 191d1d1a BVA |
570 | done |
| 571 | "$(dirname "$0")/../../fio" "${opts[@]}" >> "${logfile}.${test_number}" 2>&1 | |
| 572 | # Next, run the test. | |
| 573 | off=$((first_sequential_zone_sector * 512)) | |
| 574 | size=$((disk_size - off)) | |
| 575 | opts=("--name=$dev" "--filename=$dev" "--offset=$off" "--size=$size") | |
| 6dcb098d | 576 | opts+=("--bs=$bs" "$(ioengine "psync")" "--rw=randread" "--direct=1") |
| 191d1d1a BVA |
577 | opts+=("--thread=1" "--time_based" "--runtime=30" "--zonemode=zbd") |
| 578 | opts+=("--zonesize=${zone_size}") | |
| 579 | run_fio "${opts[@]}" >> "${logfile}.${test_number}" 2>&1 || return $? | |
| 580 | } | |
| 581 | ||
| 582 | # Random writes across all sequential zones. This is not only a fio test but | |
| 583 | # also allows to verify the performance of a drive. | |
| 584 | test32() { | |
| 585 | local off opts=() size | |
| 586 | ||
| 587 | off=$((first_sequential_zone_sector * 512)) | |
| 588 | size=$((disk_size - off)) | |
| 589 | opts+=("--name=$dev" "--filename=$dev" "--offset=$off" "--size=$size") | |
| 6dcb098d | 590 | opts+=("--bs=128K" "$(ioengine "psync")" "--rw=randwrite" "--direct=1") |
| 191d1d1a BVA |
591 | opts+=("--thread=1" "--time_based" "--runtime=30") |
| 592 | opts+=("--max_open_zones=$max_open_zones" "--zonemode=zbd") | |
| 593 | opts+=("--zonesize=${zone_size}") | |
| 594 | run_fio "${opts[@]}" >> "${logfile}.${test_number}" 2>&1 || return $? | |
| 595 | } | |
| 596 | ||
| 597 | # Write to sequential zones with a block size that is not a divisor of the | |
| 598 | # zone size. | |
| 599 | test33() { | |
| 600 | local bs io_size size | |
| 601 | ||
| 602 | size=$((2 * zone_size)) | |
| 603 | io_size=$((5 * zone_size)) | |
| 604 | bs=$((3 * zone_size / 4)) | |
| 6dcb098d DF |
605 | run_fio_on_seq "$(ioengine "psync")" --iodepth=1 --rw=write \ |
| 606 | --size=$size --io_size=$io_size --bs=$bs \ | |
| 191d1d1a BVA |
607 | >> "${logfile}.${test_number}" 2>&1 || return $? |
| 608 | check_written $(((io_size + bs - 1) / bs * bs)) || return $? | |
| 609 | } | |
| 610 | ||
| 611 | # Write to sequential zones with a block size that is not a divisor of the | |
| 612 | # zone size and with data verification enabled. | |
| 613 | test34() { | |
| 614 | local size | |
| 615 | ||
| 616 | size=$((2 * zone_size)) | |
| 6dcb098d | 617 | run_fio_on_seq "$(ioengine "psync")" --iodepth=1 --rw=write --size=$size \ |
| 191d1d1a BVA |
618 | --do_verify=1 --verify=md5 --bs=$((3 * zone_size / 4)) \ |
| 619 | >> "${logfile}.${test_number}" 2>&1 && return 1 | |
| 620 | grep -q 'not a divisor of' "${logfile}.${test_number}" | |
| 621 | } | |
| 622 | ||
| 623 | # Test 1/4 for the I/O boundary rounding code: $size < $zone_size. | |
| 624 | test35() { | |
| 625 | local bs off io_size size | |
| 626 | ||
| 627 | off=$(((first_sequential_zone_sector + 1) * 512)) | |
| 628 | size=$((zone_size - 2 * 512)) | |
| 629 | bs=$((zone_size / 4)) | |
| 6dcb098d DF |
630 | run_one_fio_job --offset=$off --size=$size "$(ioengine "psync")" \ |
| 631 | --iodepth=1 --rw=write --do_verify=1 --verify=md5 \ | |
| 632 | --bs=$bs --zonemode=zbd --zonesize="${zone_size}" \ | |
| 191d1d1a BVA |
633 | >> "${logfile}.${test_number}" 2>&1 && return 1 |
| 634 | grep -q 'io_size must be at least one zone' "${logfile}.${test_number}" | |
| 635 | } | |
| 636 | ||
| 637 | # Test 2/4 for the I/O boundary rounding code: $size < $zone_size. | |
| 638 | test36() { | |
| 639 | local bs off io_size size | |
| 640 | ||
| 641 | off=$(((first_sequential_zone_sector) * 512)) | |
| 642 | size=$((zone_size - 512)) | |
| 643 | bs=$((zone_size / 4)) | |
| 6dcb098d DF |
644 | run_one_fio_job --offset=$off --size=$size "$(ioengine "psync")" \ |
| 645 | --iodepth=1 --rw=write --do_verify=1 --verify=md5 \ | |
| 646 | --bs=$bs --zonemode=zbd --zonesize="${zone_size}" \ | |
| 191d1d1a BVA |
647 | >> "${logfile}.${test_number}" 2>&1 && return 1 |
| 648 | grep -q 'io_size must be at least one zone' "${logfile}.${test_number}" | |
| 649 | } | |
| 650 | ||
| 651 | # Test 3/4 for the I/O boundary rounding code: $size > $zone_size. | |
| 652 | test37() { | |
| 653 | local bs off size | |
| 654 | ||
| 655 | if [ "$first_sequential_zone_sector" = 0 ]; then | |
| 656 | off=0 | |
| 657 | else | |
| 658 | off=$(((first_sequential_zone_sector - 1) * 512)) | |
| 659 | fi | |
| 660 | size=$((zone_size + 2 * 512)) | |
| 661 | bs=$((zone_size / 4)) | |
| 6dcb098d DF |
662 | run_one_fio_job --offset=$off --size=$size "$(ioengine "psync")" \ |
| 663 | --iodepth=1 --rw=write --do_verify=1 --verify=md5 \ | |
| 664 | --bs=$bs --zonemode=zbd --zonesize="${zone_size}" \ | |
| 191d1d1a BVA |
665 | >> "${logfile}.${test_number}" 2>&1 |
| 666 | check_written $((zone_size)) || return $? | |
| 667 | } | |
| 668 | ||
| 669 | # Test 4/4 for the I/O boundary rounding code: $offset > $disk_size - $zone_size | |
| 670 | test38() { | |
| 671 | local bs off size | |
| 672 | ||
| 673 | size=$((logical_block_size)) | |
| 674 | off=$((disk_size - logical_block_size)) | |
| 675 | bs=$((logical_block_size)) | |
| 6dcb098d DF |
676 | run_one_fio_job --offset=$off --size=$size "$(ioengine "psync")" \ |
| 677 | --iodepth=1 --rw=write --do_verify=1 --verify=md5 \ | |
| 678 | --bs=$bs --zonemode=zbd --zonesize="${zone_size}" \ | |
| 191d1d1a BVA |
679 | >> "${logfile}.${test_number}" 2>&1 && return 1 |
| 680 | grep -q 'io_size must be at least one zone' "${logfile}.${test_number}" | |
| 681 | } | |
| 682 | ||
| 683 | # Read one block from a block device. | |
| 684 | read_one_block() { | |
| 685 | local bs | |
| 686 | ||
| 687 | bs=$((logical_block_size)) | |
| 6dcb098d | 688 | run_one_fio_job --rw=read "$(ioengine "psync")" --bs=$bs --size=$bs "$@" 2>&1 | |
| 191d1d1a BVA |
689 | tee -a "${logfile}.${test_number}" |
| 690 | } | |
| 691 | ||
| 692 | # Check whether fio accepts --zonemode=none for zoned block devices. | |
| 693 | test39() { | |
| 694 | [ -n "$is_zbd" ] || return 0 | |
| 695 | read_one_block --zonemode=none >/dev/null || return $? | |
| 696 | check_read $((logical_block_size)) || return $? | |
| 697 | } | |
| 698 | ||
| 699 | # Check whether fio accepts --zonemode=strided for zoned block devices. | |
| 700 | test40() { | |
| 701 | local bs | |
| 702 | ||
| 703 | bs=$((logical_block_size)) | |
| 704 | [ -n "$is_zbd" ] || return 0 | |
| 705 | read_one_block --zonemode=strided | | |
| 706 | grep -q 'fio: --zonesize must be specified when using --zonemode=strided' || | |
| 707 | return $? | |
| 708 | read_one_block --zonemode=strided --zonesize=$bs >/dev/null || return $? | |
| 709 | check_read $bs || return $? | |
| 710 | } | |
| 711 | ||
| 712 | # Check whether fio checks the zone size for zoned block devices. | |
| 713 | test41() { | |
| 714 | [ -n "$is_zbd" ] || return 0 | |
| 715 | read_one_block --zonemode=zbd --zonesize=$((2 * zone_size)) | | |
| 716 | grep -q 'job parameter zonesize.*does not match disk zone size' | |
| 717 | } | |
| 718 | ||
| 719 | # Check whether fio handles --zonesize=0 correctly for regular block devices. | |
| 720 | test42() { | |
| 721 | [ -n "$is_zbd" ] && return 0 | |
| 722 | read_one_block --zonemode=zbd --zonesize=0 | | |
| 723 | grep -q 'Specifying the zone size is mandatory for regular block devices with --zonemode=zbd' | |
| 724 | } | |
| 725 | ||
| a4b7f12b | 726 | # Check whether fio handles --zonesize=1 correctly for regular block devices. |
| 191d1d1a | 727 | test43() { |
| a4b7f12b | 728 | [ -n "$is_zbd" ] && return 0 |
| 191d1d1a BVA |
729 | read_one_block --zonemode=zbd --zonesize=1 | |
| 730 | grep -q 'zone size must be at least 512 bytes for --zonemode=zbd' | |
| 731 | } | |
| 732 | ||
| 733 | # Check whether fio handles --zonemode=none --zonesize=1 correctly. | |
| 734 | test44() { | |
| 735 | read_one_block --zonemode=none --zonesize=1 | | |
| 736 | grep -q 'fio: --zonemode=none and --zonesize are not compatible' | |
| 737 | } | |
| 738 | ||
| 739 | test45() { | |
| 740 | local bs i | |
| 741 | ||
| 742 | [ -z "$is_zbd" ] && return 0 | |
| 743 | bs=$((logical_block_size)) | |
| 6dcb098d | 744 | run_one_fio_job "$(ioengine "psync")" --iodepth=1 --rw=randwrite --bs=$bs\ |
| 191d1d1a BVA |
745 | --offset=$((first_sequential_zone_sector * 512)) \ |
| 746 | --size="$zone_size" --do_verify=1 --verify=md5 2>&1 | | |
| 747 | tee -a "${logfile}.${test_number}" | | |
| 748 | grep -q "fio: first I/O failed. If .* is a zoned block device, consider --zonemode=zbd" | |
| 749 | } | |
| 750 | ||
| bc596cbc DLM |
751 | # Random write to sequential zones, libaio, 8 jobs, queue depth 64 per job |
| 752 | test46() { | |
| 753 | local size | |
| 754 | ||
| 755 | size=$((4 * zone_size)) | |
| 6dcb098d | 756 | run_fio_on_seq "$(ioengine "libaio")" --iodepth=64 --rw=randwrite --bs=4K \ |
| bc596cbc DLM |
757 | --group_reporting=1 --numjobs=8 \ |
| 758 | >> "${logfile}.${test_number}" 2>&1 || return $? | |
| 759 | check_written $((size * 8)) || return $? | |
| 760 | } | |
| 761 | ||
| 4d37720a DLM |
762 | # Check whether fio handles --zonemode=zbd --zoneskip=1 correctly. |
| 763 | test47() { | |
| 764 | local bs | |
| 765 | ||
| 766 | [ -z "$is_zbd" ] && return 0 | |
| 767 | bs=$((logical_block_size)) | |
| 6dcb098d | 768 | run_one_fio_job "$(ioengine "psync")" --rw=write --bs=$bs \ |
| 4d37720a DLM |
769 | --zonemode=zbd --zoneskip=1 \ |
| 770 | >> "${logfile}.${test_number}" 2>&1 && return 1 | |
| 771 | grep -q 'zoneskip 1 is not a multiple of the device zone size' "${logfile}.${test_number}" | |
| 772 | } | |
| 773 | ||
| 3bd2078b NA |
774 | # Multiple overlapping random write jobs for the same drive and with a |
| 775 | # limited number of open zones. This is similar to test29, but uses libaio | |
| 776 | # to stress test zone locking. | |
| 777 | test48() { | |
| 778 | local i jobs=16 off opts=() | |
| 779 | ||
| 780 | off=$((first_sequential_zone_sector * 512 + 64 * zone_size)) | |
| 781 | size=$((16*zone_size)) | |
| 782 | [ -n "$is_zbd" ] && reset_zone "$dev" $((off / 512)) | |
| 783 | opts=("--aux-path=/tmp" "--allow_file_create=0" "--significant_figures=10") | |
| 784 | opts+=("--debug=zbd") | |
| 6dcb098d | 785 | opts+=("$(ioengine "libaio")" "--rw=randwrite" "--direct=1") |
| 3bd2078b NA |
786 | opts+=("--time_based" "--runtime=30") |
| 787 | opts+=("--zonemode=zbd" "--zonesize=${zone_size}") | |
| 788 | opts+=("--max_open_zones=4") | |
| 789 | for ((i=0;i<jobs;i++)); do | |
| 790 | opts+=("--name=job$i" "--filename=$dev" "--offset=$off" "--bs=16K") | |
| 791 | opts+=("--io_size=$zone_size" "--iodepth=256" "--thread=1") | |
| 792 | opts+=("--group_reporting=1") | |
| 793 | done | |
| 794 | ||
| 795 | fio=$(dirname "$0")/../../fio | |
| 796 | ||
| 797 | { echo; echo "fio ${opts[*]}"; echo; } >>"${logfile}.${test_number}" | |
| 798 | ||
| 799 | timeout -v -s KILL 45s \ | |
| 800 | "${dynamic_analyzer[@]}" "$fio" "${opts[@]}" \ | |
| 801 | >> "${logfile}.${test_number}" 2>&1 || return $? | |
| 802 | } | |
| 803 | ||
| 191d1d1a BVA |
804 | tests=() |
| 805 | dynamic_analyzer=() | |
| 806 | reset_all_zones= | |
| 6dcb098d DF |
807 | use_libzbc= |
| 808 | zbd_debug= | |
| 191d1d1a BVA |
809 | |
| 810 | while [ "${1#-}" != "$1" ]; do | |
| 811 | case "$1" in | |
| 812 | -d) dynamic_analyzer=(valgrind "--read-var-info=yes" "--tool=drd" | |
| 813 | "--show-confl-seg=no"); | |
| 814 | shift;; | |
| 815 | -e) dynamic_analyzer=(valgrind "--read-var-info=yes" "--tool=helgrind"); | |
| 816 | shift;; | |
| 6dcb098d | 817 | -l) use_libzbc=1; shift;; |
| 191d1d1a BVA |
818 | -r) reset_all_zones=1; shift;; |
| 819 | -t) tests+=("$2"); shift; shift;; | |
| 820 | -v) dynamic_analyzer=(valgrind "--read-var-info=yes"); | |
| 821 | shift;; | |
| 6dcb098d | 822 | -z) zbd_debug=1; shift;; |
| 191d1d1a BVA |
823 | --) shift; break;; |
| 824 | esac | |
| 825 | done | |
| 826 | ||
| 827 | if [ $# != 1 ]; then | |
| 828 | usage | |
| 829 | exit 1 | |
| 830 | fi | |
| 831 | ||
| 832 | # shellcheck source=functions | |
| 833 | source "$(dirname "$0")/functions" || exit $? | |
| 834 | ||
| 6dcb098d DF |
835 | var_opts=() |
| 836 | if [ -n "$zbd_debug" ]; then | |
| 837 | var_opts+=("--debug=zbd") | |
| 838 | fi | |
| 191d1d1a BVA |
839 | dev=$1 |
| 840 | realdev=$(readlink -f "$dev") | |
| 841 | basename=$(basename "$realdev") | |
| 6dcb098d DF |
842 | |
| 843 | if [[ -b "$realdev" ]]; then | |
| 844 | major=$((0x$(stat -L -c '%t' "$realdev"))) || exit $? | |
| 845 | minor=$((0x$(stat -L -c '%T' "$realdev"))) || exit $? | |
| 846 | disk_size=$(($(<"/sys/dev/block/$major:$minor/size")*512)) | |
| 847 | ||
| 848 | # When the target is a partition device, get basename of its | |
| 849 | # holder device to access sysfs path of the holder device | |
| 850 | if [[ -r "/sys/dev/block/$major:$minor/partition" ]]; then | |
| 851 | realsysfs=$(readlink "/sys/dev/block/$major:$minor") | |
| 852 | basename=$(basename "${realsysfs%/*}") | |
| 853 | fi | |
| 854 | logical_block_size=$(<"/sys/block/$basename/queue/logical_block_size") | |
| 855 | case "$(<"/sys/class/block/$basename/queue/zoned")" in | |
| 856 | host-managed|host-aware) | |
| 857 | is_zbd=true | |
| 858 | if ! result=($(first_sequential_zone "$dev")); then | |
| 859 | echo "Failed to determine first sequential zone" | |
| 860 | exit 1 | |
| 861 | fi | |
| 862 | first_sequential_zone_sector=${result[0]} | |
| 863 | sectors_per_zone=${result[1]} | |
| 864 | zone_size=$((sectors_per_zone * 512)) | |
| 865 | if ! max_open_zones=$(max_open_zones "$dev"); then | |
| 866 | echo "Failed to determine maximum number of open zones" | |
| 867 | exit 1 | |
| 868 | fi | |
| 869 | set_io_scheduler "$basename" deadline || exit $? | |
| 870 | if [ -n "$reset_all_zones" ]; then | |
| 871 | reset_zone "$dev" -1 | |
| 872 | fi | |
| 873 | ;; | |
| 874 | *) | |
| 875 | first_sequential_zone_sector=$(((disk_size / 2) & | |
| 876 | (logical_block_size - 1))) | |
| 877 | zone_size=$(max 65536 "$logical_block_size") | |
| 878 | sectors_per_zone=$((zone_size / 512)) | |
| 879 | max_open_zones=128 | |
| 880 | set_io_scheduler "$basename" none || exit $? | |
| 881 | ;; | |
| 882 | esac | |
| 883 | elif [[ -c "$realdev" ]]; then | |
| 884 | # For an SG node, we must have libzbc option specified | |
| 885 | if [[ ! -n "$use_libzbc" ]]; then | |
| 886 | echo "Character device files can only be used with -l (libzbc) option" | |
| 887 | exit 1 | |
| 888 | fi | |
| 889 | ||
| 890 | if ! $(is_zbc "$dev"); then | |
| 891 | echo "Device is not a ZBC disk" | |
| 892 | exit 1 | |
| 893 | fi | |
| 191d1d1a | 894 | is_zbd=true |
| 6dcb098d DF |
895 | |
| 896 | if ! disk_size=($(( $(zbc_disk_sectors "$dev") * 512))); then | |
| 897 | echo "Failed to determine disk size" | |
| 898 | exit 1 | |
| 899 | fi | |
| 900 | if ! logical_block_size=($(zbc_logical_block_size "$dev")); then | |
| 901 | echo "Failed to determine logical block size" | |
| 902 | exit 1 | |
| 903 | fi | |
| 191d1d1a | 904 | if ! result=($(first_sequential_zone "$dev")); then |
| 6dcb098d DF |
905 | echo "Failed to determine first sequential zone" |
| 906 | exit 1 | |
| 191d1d1a BVA |
907 | fi |
| 908 | first_sequential_zone_sector=${result[0]} | |
| 909 | sectors_per_zone=${result[1]} | |
| 910 | zone_size=$((sectors_per_zone * 512)) | |
| 911 | if ! max_open_zones=$(max_open_zones "$dev"); then | |
| 6dcb098d DF |
912 | echo "Failed to determine maximum number of open zones" |
| 913 | exit 1 | |
| 191d1d1a | 914 | fi |
| 191d1d1a | 915 | if [ -n "$reset_all_zones" ]; then |
| 6dcb098d | 916 | reset_zone "$dev" -1 |
| 191d1d1a | 917 | fi |
| 6dcb098d DF |
918 | fi |
| 919 | ||
| 920 | echo -n "First sequential zone starts at sector $first_sequential_zone_sector;" | |
| 921 | echo " zone size: $((zone_size >> 20)) MB" | |
| 191d1d1a BVA |
922 | |
| 923 | if [ "${#tests[@]}" = 0 ]; then | |
| 106a71cd SK |
924 | readarray -t tests < <(declare -F | grep "test[0-9]*" | \ |
| 925 | tr -c -d "[:digit:]\n" | sort -n) | |
| 191d1d1a BVA |
926 | fi |
| 927 | ||
| 928 | logfile=$0.log | |
| 929 | ||
| 72176dc7 BVA |
930 | passed=0 |
| 931 | failed=0 | |
| 332fa178 DF |
932 | if [ -t 1 ]; then |
| 933 | red="\e[1;31m" | |
| 934 | green="\e[1;32m" | |
| 935 | end="\e[m" | |
| 936 | else | |
| 937 | red="" | |
| 938 | green="" | |
| 939 | end="" | |
| 940 | fi | |
| 191d1d1a | 941 | rc=0 |
| 332fa178 | 942 | |
| 191d1d1a BVA |
943 | for test_number in "${tests[@]}"; do |
| 944 | rm -f "${logfile}.${test_number}" | |
| 332fa178 | 945 | echo -n "Running test $(printf "%02d" $test_number) ... " |
| 191d1d1a BVA |
946 | if eval "test$test_number"; then |
| 947 | status="PASS" | |
| 332fa178 | 948 | cc_status="${green}${status}${end}" |
| 72176dc7 | 949 | ((passed++)) |
| 191d1d1a BVA |
950 | else |
| 951 | status="FAIL" | |
| 332fa178 | 952 | cc_status="${red}${status}${end}" |
| 72176dc7 | 953 | ((failed++)) |
| 191d1d1a BVA |
954 | rc=1 |
| 955 | fi | |
| 332fa178 | 956 | echo -e "$cc_status" |
| 191d1d1a BVA |
957 | echo "$status" >> "${logfile}.${test_number}" |
| 958 | done | |
| 959 | ||
| 72176dc7 BVA |
960 | echo "$passed tests passed" |
| 961 | if [ $failed -gt 0 ]; then | |
| 962 | echo " and $failed tests failed" | |
| 963 | fi | |
| 191d1d1a | 964 | exit $rc |