syslet: x86_64 support
[fio.git] / HOWTO
CommitLineData
71bfa161
JA
1Table of contents
2-----------------
3
41. Overview
52. How fio works
63. Running fio
74. Job file format
85. Detailed list of parameters
96. Normal output
107. Terse output
11
12
131.0 Overview and history
14------------------------
15fio was originally written to save me the hassle of writing special test
16case programs when I wanted to test a specific workload, either for
17performance reasons or to find/reproduce a bug. The process of writing
18such a test app can be tiresome, especially if you have to do it often.
19Hence I needed a tool that would be able to simulate a given io workload
20without resorting to writing a tailored test case again and again.
21
22A test work load is difficult to define, though. There can be any number
23of processes or threads involved, and they can each be using their own
24way of generating io. You could have someone dirtying large amounts of
25memory in an memory mapped file, or maybe several threads issuing
26reads using asynchronous io. fio needed to be flexible enough to
27simulate both of these cases, and many more.
28
292.0 How fio works
30-----------------
31The first step in getting fio to simulate a desired io workload, is
32writing a job file describing that specific setup. A job file may contain
33any number of threads and/or files - the typical contents of the job file
34is a global section defining shared parameters, and one or more job
35sections describing the jobs involved. When run, fio parses this file
36and sets everything up as described. If we break down a job from top to
37bottom, it contains the following basic parameters:
38
39 IO type Defines the io pattern issued to the file(s).
40 We may only be reading sequentially from this
41 file(s), or we may be writing randomly. Or even
42 mixing reads and writes, sequentially or randomly.
43
44 Block size In how large chunks are we issuing io? This may be
45 a single value, or it may describe a range of
46 block sizes.
47
48 IO size How much data are we going to be reading/writing.
49
50 IO engine How do we issue io? We could be memory mapping the
51 file, we could be using regular read/write, we
d0ff85df 52 could be using splice, async io, syslet, or even
71bfa161
JA
53 SG (SCSI generic sg).
54
6c219763 55 IO depth If the io engine is async, how large a queuing
71bfa161
JA
56 depth do we want to maintain?
57
58 IO type Should we be doing buffered io, or direct/raw io?
59
60 Num files How many files are we spreading the workload over.
61
62 Num threads How many threads or processes should we spread
63 this workload over.
64
65The above are the basic parameters defined for a workload, in addition
66there's a multitude of parameters that modify other aspects of how this
67job behaves.
68
69
703.0 Running fio
71---------------
72See the README file for command line parameters, there are only a few
73of them.
74
75Running fio is normally the easiest part - you just give it the job file
76(or job files) as parameters:
77
78$ fio job_file
79
80and it will start doing what the job_file tells it to do. You can give
81more than one job file on the command line, fio will serialize the running
82of those files. Internally that is the same as using the 'stonewall'
83parameter described the the parameter section.
84
b4692828
JA
85If the job file contains only one job, you may as well just give the
86parameters on the command line. The command line parameters are identical
87to the job parameters, with a few extra that control global parameters
88(see README). For example, for the job file parameter iodepth=2, the
c2b1e753
JA
89mirror command line option would be --iodepth 2 or --iodepth=2. You can
90also use the command line for giving more than one job entry. For each
91--name option that fio sees, it will start a new job with that name.
92Command line entries following a --name entry will apply to that job,
93until there are no more entries or a new --name entry is seen. This is
94similar to the job file options, where each option applies to the current
95job until a new [] job entry is seen.
b4692828 96
71bfa161
JA
97fio does not need to run as root, except if the files or devices specified
98in the job section requires that. Some other options may also be restricted,
6c219763 99such as memory locking, io scheduler switching, and decreasing the nice value.
71bfa161
JA
100
101
1024.0 Job file format
103-------------------
104As previously described, fio accepts one or more job files describing
105what it is supposed to do. The job file format is the classic ini file,
106where the names enclosed in [] brackets define the job name. You are free
107to use any ascii name you want, except 'global' which has special meaning.
108A global section sets defaults for the jobs described in that file. A job
109may override a global section parameter, and a job file may even have
110several global sections if so desired. A job is only affected by a global
65db0851
JA
111section residing above it. If the first character in a line is a ';' or a
112'#', the entire line is discarded as a comment.
71bfa161
JA
113
114So lets look at a really simple job file that define to threads, each
115randomly reading from a 128MiB file.
116
117; -- start job file --
118[global]
119rw=randread
120size=128m
121
122[job1]
123
124[job2]
125
126; -- end job file --
127
128As you can see, the job file sections themselves are empty as all the
129described parameters are shared. As no filename= option is given, fio
c2b1e753
JA
130makes up a filename for each of the jobs as it sees fit. On the command
131line, this job would look as follows:
132
133$ fio --name=global --rw=randread --size=128m --name=job1 --name=job2
134
71bfa161
JA
135
136Lets look at an example that have a number of processes writing randomly
137to files.
138
139; -- start job file --
140[random-writers]
141ioengine=libaio
142iodepth=4
143rw=randwrite
144bs=32k
145direct=0
146size=64m
147numjobs=4
148
149; -- end job file --
150
151Here we have no global section, as we only have one job defined anyway.
152We want to use async io here, with a depth of 4 for each file. We also
153increased the buffer size used to 32KiB and define numjobs to 4 to
154fork 4 identical jobs. The result is 4 processes each randomly writing
b4692828
JA
155to their own 64MiB file. Instead of using the above job file, you could
156have given the parameters on the command line. For this case, you would
157specify:
158
159$ fio --name=random-writers --ioengine=libaio --iodepth=4 --rw=randwrite --bs=32k --direct=0 --size=64m --numjobs=4
71bfa161
JA
160
161fio ships with a few example job files, you can also look there for
162inspiration.
163
164
1655.0 Detailed list of parameters
166-------------------------------
167
168This section describes in details each parameter associated with a job.
169Some parameters take an option of a given type, such as an integer or
170a string. The following types are used:
171
172str String. This is a sequence of alpha characters.
173int Integer. A whole number value, may be negative.
174siint SI integer. A whole number value, which may contain a postfix
175 describing the base of the number. Accepted postfixes are k/m/g,
6c219763 176 meaning kilo, mega, and giga. So if you want to specify 4096,
71bfa161
JA
177 you could either write out '4096' or just give 4k. The postfixes
178 signify base 2 values, so 1024 is 1k and 1024k is 1m and so on.
179bool Boolean. Usually parsed as an integer, however only defined for
180 true and false (1 and 0).
181irange Integer range with postfix. Allows value range to be given, such
0c9baf91
JA
182 as 1024-4096. A colon may also be used as the seperator, eg
183 1k:4k. If the option allows two sets of ranges, they can be
184 specified with a ',' or '/' delimiter: 1k-4k/8k-32k. Also see
185 siint.
71bfa161
JA
186
187With the above in mind, here follows the complete list of fio job
188parameters.
189
190name=str ASCII name of the job. This may be used to override the
191 name printed by fio for this job. Otherwise the job
c2b1e753 192 name is used. On the command line this parameter has the
6c219763 193 special purpose of also signaling the start of a new
c2b1e753 194 job.
71bfa161 195
61697c37
JA
196description=str Text description of the job. Doesn't do anything except
197 dump this text description when this job is run. It's
198 not parsed.
199
71bfa161
JA
200directory=str Prefix filenames with this directory. Used to places files
201 in a different location than "./".
202
203filename=str Fio normally makes up a filename based on the job name,
204 thread number, and file number. If you want to share
205 files between threads in a job or several jobs, specify
ed92ac0c
JA
206 a filename for each of them to override the default. If
207 the ioengine used is 'net', the filename is the host and
208 port to connect to in the format of =host:port.
71bfa161
JA
209
210rw=str Type of io pattern. Accepted values are:
211
212 read Sequential reads
213 write Sequential writes
214 randwrite Random writes
215 randread Random reads
216 rw Sequential mixed reads and writes
217 randrw Random mixed reads and writes
218
219 For the mixed io types, the default is to split them 50/50.
220 For certain types of io the result may still be skewed a bit,
221 since the speed may be different.
222
ee738499
JA
223randrepeat=bool For random IO workloads, seed the generator in a predictable
224 way so that results are repeatable across repetitions.
225
71bfa161
JA
226size=siint The total size of file io for this job. This may describe
227 the size of the single file the job uses, or it may be
228 divided between the number of files in the job. If the
229 file already exists, the file size will be adjusted to this
230 size if larger than the current file size. If this parameter
231 is not given and the file exists, the file size will be used.
232
f90eff5a
JA
233bs=siint The block size used for the io units. Defaults to 4k. Values
234 can be given for both read and writes. If a single siint is
235 given, it will apply to both. If a second siint is specified
236 after a comma, it will apply to writes only. In other words,
237 the format is either bs=read_and_write or bs=read,write.
238 bs=4k,8k will thus use 4k blocks for reads, and 8k blocks
787f7e95
JA
239 for writes. If you only wish to set the write size, you
240 can do so by passing an empty read size - bs=,8k will set
241 8k for writes and leave the read default value.
a00735e6 242
71bfa161
JA
243bsrange=irange Instead of giving a single block size, specify a range
244 and fio will mix the issued io block sizes. The issued
245 io unit will always be a multiple of the minimum value
f90eff5a
JA
246 given (also see bs_unaligned). Applies to both reads and
247 writes, however a second range can be given after a comma.
248 See bs=.
a00735e6 249
690adba3
JA
250bs_unaligned If this option is given, any byte size value within bsrange
251 may be used as a block range. This typically wont work with
252 direct IO, as that normally requires sector alignment.
71bfa161
JA
253
254nrfiles=int Number of files to use for this job. Defaults to 1.
255
256ioengine=str Defines how the job issues io to the file. The following
257 types are defined:
258
259 sync Basic read(2) or write(2) io. lseek(2) is
260 used to position the io location.
261
262 libaio Linux native asynchronous io.
263
264 posixaio glibc posix asynchronous io.
265
266 mmap File is memory mapped and data copied
267 to/from using memcpy(3).
268
269 splice splice(2) is used to transfer the data and
270 vmsplice(2) to transfer data from user
271 space to the kernel.
272
d0ff85df
JA
273 syslet-rw Use the syslet system calls to make
274 regular read/write async.
275
71bfa161 276 sg SCSI generic sg v3 io. May either be
6c219763 277 synchronous using the SG_IO ioctl, or if
71bfa161
JA
278 the target is an sg character device
279 we use read(2) and write(2) for asynchronous
280 io.
281
a94ea28b
JA
282 null Doesn't transfer any data, just pretends
283 to. This is mainly used to exercise fio
284 itself and for debugging/testing purposes.
285
ed92ac0c
JA
286 net Transfer over the network to given host:port.
287 'filename' must be set appropriately to
288 filename=host:port regardless of send
289 or receive, if the latter only the port
290 argument is used.
291
71bfa161
JA
292iodepth=int This defines how many io units to keep in flight against
293 the file. The default is 1 for each file defined in this
294 job, can be overridden with a larger value for higher
295 concurrency.
296
cb5ab512
JA
297iodepth_batch=int This defines how many pieces of IO to submit at once.
298 It defaults to the same as iodepth, but can be set lower
299 if one so desires.
300
e916b390
JA
301iodepth_low=int The low water mark indicating when to start filling
302 the queue again. Defaults to the same as iodepth, meaning
303 that fio will attempt to keep the queue full at all times.
304 If iodepth is set to eg 16 and iodepth_low is set to 4, then
305 after fio has filled the queue of 16 requests, it will let
306 the depth drain down to 4 before starting to fill it again.
307
71bfa161 308direct=bool If value is true, use non-buffered io. This is usually
76a43db4
JA
309 O_DIRECT.
310
311buffered=bool If value is true, use buffered io. This is the opposite
312 of the 'direct' option. Defaults to true.
71bfa161
JA
313
314offset=siint Start io at the given offset in the file. The data before
315 the given offset will not be touched. This effectively
316 caps the file size at real_size - offset.
317
318fsync=int If writing to a file, issue a sync of the dirty data
319 for every number of blocks given. For example, if you give
320 32 as a parameter, fio will sync the file for every 32
321 writes issued. If fio is using non-buffered io, we may
322 not sync the file. The exception is the sg io engine, which
6c219763 323 synchronizes the disk cache anyway.
71bfa161
JA
324
325overwrite=bool If writing to a file, setup the file first and do overwrites.
326
327end_fsync=bool If true, fsync file contents when the job exits.
328
6c219763 329rwmixcycle=int Value in milliseconds describing how often to switch between
71bfa161
JA
330 reads and writes for a mixed workload. The default is
331 500 msecs.
332
333rwmixread=int How large a percentage of the mix should be reads.
334
335rwmixwrite=int How large a percentage of the mix should be writes. If both
336 rwmixread and rwmixwrite is given and the values do not add
337 up to 100%, the latter of the two will be used to override
338 the first.
339
bb8895e0
JA
340norandommap Normally fio will cover every block of the file when doing
341 random IO. If this option is given, fio will just get a
342 new random offset without looking at past io history. This
343 means that some blocks may not be read or written, and that
344 some blocks may be read/written more than once. This option
345 is mutually exclusive with verify= for that reason.
346
71bfa161
JA
347nice=int Run the job with the given nice value. See man nice(2).
348
349prio=int Set the io priority value of this job. Linux limits us to
350 a positive value between 0 and 7, with 0 being the highest.
351 See man ionice(1).
352
353prioclass=int Set the io priority class. See man ionice(1).
354
355thinktime=int Stall the job x microseconds after an io has completed before
356 issuing the next. May be used to simulate processing being
48097d5c
JA
357 done by an application. See thinktime_blocks and
358 thinktime_spin.
359
360thinktime_spin=int
361 Only valid if thinktime is set - pretend to spend CPU time
362 doing something with the data received, before falling back
363 to sleeping for the rest of the period specified by
364 thinktime.
9c1f7434
JA
365
366thinktime_blocks
367 Only valid if thinktime is set - control how many blocks
368 to issue, before waiting 'thinktime' usecs. If not set,
369 defaults to 1 which will make fio wait 'thinktime' usecs
370 after every block.
71bfa161
JA
371
372rate=int Cap the bandwidth used by this job to this number of KiB/sec.
373
374ratemin=int Tell fio to do whatever it can to maintain at least this
375 bandwidth.
376
377ratecycle=int Average bandwidth for 'rate' and 'ratemin' over this number
6c219763 378 of milliseconds.
71bfa161
JA
379
380cpumask=int Set the CPU affinity of this job. The parameter given is a
381 bitmask of allowed CPU's the job may run on. See man
382 sched_setaffinity(2).
383
384startdelay=int Start this job the specified number of seconds after fio
385 has started. Only useful if the job file contains several
386 jobs, and you want to delay starting some jobs to a certain
387 time.
388
03b74b3e 389runtime=int Tell fio to terminate processing after the specified number
71bfa161
JA
390 of seconds. It can be quite hard to determine for how long
391 a specified job will run, so this parameter is handy to
392 cap the total runtime to a given time.
393
394invalidate=bool Invalidate the buffer/page cache parts for this file prior
395 to starting io. Defaults to true.
396
397sync=bool Use sync io for buffered writes. For the majority of the
398 io engines, this means using O_SYNC.
399
400mem=str Fio can use various types of memory as the io unit buffer.
401 The allowed values are:
402
403 malloc Use memory from malloc(3) as the buffers.
404
405 shm Use shared memory as the buffers. Allocated
406 through shmget(2).
407
74b025b0
JA
408 shmhuge Same as shm, but use huge pages as backing.
409
313cb206
JA
410 mmap Use mmap to allocate buffers. May either be
411 anonymous memory, or can be file backed if
412 a filename is given after the option. The
413 format is mem=mmap:/path/to/file.
71bfa161 414
d0bdaf49
JA
415 mmaphuge Use a memory mapped huge file as the buffer
416 backing. Append filename after mmaphuge, ala
417 mem=mmaphuge:/hugetlbfs/file
418
71bfa161 419 The area allocated is a function of the maximum allowed
5394ae5f
JA
420 bs size for the job, multiplied by the io depth given. Note
421 that for shmhuge and mmaphuge to work, the system must have
422 free huge pages allocated. This can normally be checked
423 and set by reading/writing /proc/sys/vm/nr_hugepages on a
424 Linux system. Fio assumes a huge page is 4MiB in size. So
425 to calculate the number of huge pages you need for a given
426 job file, add up the io depth of all jobs (normally one unless
427 iodepth= is used) and multiply by the maximum bs set. Then
428 divide that number by the huge page size. You can see the
429 size of the huge pages in /proc/meminfo. If no huge pages
430 are allocated by having a non-zero number in nr_hugepages,
56bb17f2 431 using mmaphuge or shmhuge will fail. Also see hugepage-size.
5394ae5f
JA
432
433 mmaphuge also needs to have hugetlbfs mounted and the file
434 location should point there. So if it's mounted in /huge,
435 you would use mem=mmaphuge:/huge/somefile.
71bfa161 436
56bb17f2
JA
437hugepage-size=siint
438 Defines the size of a huge page. Must at least be equal
439 to the system setting, see /proc/meminfo. Defaults to 4MiB.
c51074e7
JA
440 Should probably always be a multiple of megabytes, so using
441 hugepage-size=Xm is the preferred way to set this to avoid
442 setting a non-pow-2 bad value.
56bb17f2 443
71bfa161
JA
444exitall When one job finishes, terminate the rest. The default is
445 to wait for each job to finish, sometimes that is not the
446 desired action.
447
448bwavgtime=int Average the calculated bandwidth over the given time. Value
6c219763 449 is specified in milliseconds.
71bfa161
JA
450
451create_serialize=bool If true, serialize the file creating for the jobs.
452 This may be handy to avoid interleaving of data
453 files, which may greatly depend on the filesystem
454 used and even the number of processors in the system.
455
456create_fsync=bool fsync the data file after creation. This is the
457 default.
458
e545a6ce
JA
459unlink=bool Unlink the job files when done. Not the default, as repeated
460 runs of that job would then waste time recreating the fileset
461 again and again.
71bfa161
JA
462
463loops=int Run the specified number of iterations of this job. Used
464 to repeat the same workload a given number of times. Defaults
465 to 1.
466
467verify=str If writing to a file, fio can verify the file contents
468 after each iteration of the job. The allowed values are:
469
470 md5 Use an md5 sum of the data area and store
471 it in the header of each block.
472
473 crc32 Use a crc32 sum of the data area and store
474 it in the header of each block.
475
6c219763 476 This option can be used for repeated burn-in tests of a
71bfa161
JA
477 system to make sure that the written data is also
478 correctly read back.
479
480stonewall Wait for preceeding jobs in the job file to exit, before
481 starting this one. Can be used to insert serialization
482 points in the job file.
483
484numjobs=int Create the specified number of clones of this job. May be
485 used to setup a larger number of threads/processes doing
486 the same thing.
487
488thread fio defaults to forking jobs, however if this option is
489 given, fio will use pthread_create(3) to create threads
490 instead.
491
492zonesize=siint Divide a file into zones of the specified size. See zoneskip.
493
494zoneskip=siint Skip the specified number of bytes when zonesize data has
495 been read. The two zone options can be used to only do
496 io on zones of a file.
497
076efc7c
JA
498write_iolog=str Write the issued io patterns to the specified file. See
499 read_iolog.
71bfa161 500
076efc7c 501read_iolog=str Open an iolog with the specified file name and replay the
71bfa161
JA
502 io patterns it contains. This can be used to store a
503 workload and replay it sometime later.
504
505write_bw_log If given, write a bandwidth log of the jobs in this job
506 file. Can be used to store data of the bandwidth of the
e0da9bc2
JA
507 jobs in their lifetime. The included fio_generate_plots
508 script uses gnuplot to turn these text files into nice
509 graphs.
71bfa161
JA
510
511write_lat_log Same as write_bw_log, except that this option stores io
512 completion latencies instead.
513
514lockmem=siint Pin down the specified amount of memory with mlock(2). Can
515 potentially be used instead of removing memory or booting
516 with less memory to simulate a smaller amount of memory.
517
518exec_prerun=str Before running this job, issue the command specified
519 through system(3).
520
521exec_postrun=str After the job completes, issue the command specified
522 though system(3).
523
524ioscheduler=str Attempt to switch the device hosting the file to the specified
525 io scheduler before running.
526
527cpuload=int If the job is a CPU cycle eater, attempt to use the specified
528 percentage of CPU cycles.
529
530cpuchunks=int If the job is a CPU cycle eater, split the load into
6c219763 531 cycles of the given time. In milliseconds.
71bfa161
JA
532
533
5346.0 Interpreting the output
535---------------------------
536
537fio spits out a lot of output. While running, fio will display the
538status of the jobs created. An example of that would be:
539
73c8b082 540Threads: 1: [_r] [24.8% done] [ 13509/ 8334 kb/s] [eta 00h:01m:31s]
71bfa161
JA
541
542The characters inside the square brackets denote the current status of
543each thread. The possible values (in typical life cycle order) are:
544
545Idle Run
546---- ---
547P Thread setup, but not started.
548C Thread created.
549I Thread initialized, waiting.
550 R Running, doing sequential reads.
551 r Running, doing random reads.
552 W Running, doing sequential writes.
553 w Running, doing random writes.
554 M Running, doing mixed sequential reads/writes.
555 m Running, doing mixed random reads/writes.
556 F Running, currently waiting for fsync()
557V Running, doing verification of written data.
558E Thread exited, not reaped by main thread yet.
559_ Thread reaped.
560
561The other values are fairly self explanatory - number of threads
6043c579
JA
562currently running and doing io, rate of io since last check, and the estimated
563completion percentage and time for the running group. It's impossible to
564estimate runtime of the following groups (if any).
71bfa161
JA
565
566When fio is done (or interrupted by ctrl-c), it will show the data for
567each thread, group of threads, and disks in that order. For each data
568direction, the output looks like:
569
570Client1 (g=0): err= 0:
571 write: io= 32MiB, bw= 666KiB/s, runt= 50320msec
6104ddb6
JA
572 slat (msec): min= 0, max= 136, avg= 0.03, stdev= 1.92
573 clat (msec): min= 0, max= 631, avg=48.50, stdev=86.82
574 bw (KiB/s) : min= 0, max= 1196, per=51.00%, avg=664.02, stdev=681.68
71bfa161 575 cpu : usr=1.49%, sys=0.25%, ctx=7969
71619dc2 576 IO depths : 1=0.1%, 2=0.3%, 4=0.5%, 8=99.0%, 16=0.0%, 32=0.0%, >32=0.0%
8abdce66
JA
577 lat (msec): 2=1.6%, 4=0.0%, 10=3.2%, 20=12.8%, 50=38.4%, 100=24.8%,
578 lat (msec): 250=15.2%, 500=0.0%, 750=0.0%, 1000=0.0%, >=2048=0.0%
71bfa161
JA
579
580The client number is printed, along with the group id and error of that
581thread. Below is the io statistics, here for writes. In the order listed,
582they denote:
583
584io= Number of megabytes io performed
585bw= Average bandwidth rate
586runt= The runtime of that thread
587 slat= Submission latency (avg being the average, dev being the
588 standard deviation). This is the time it took to submit
589 the io. For sync io, the slat is really the completion
590 latency, since queue/complete is one operation there.
591 clat= Completion latency. Same names as slat, this denotes the
592 time from submission to completion of the io pieces. For
593 sync io, clat will usually be equal (or very close) to 0,
594 as the time from submit to complete is basically just
595 CPU time (io has already been done, see slat explanation).
596 bw= Bandwidth. Same names as the xlat stats, but also includes
597 an approximate percentage of total aggregate bandwidth
598 this thread received in this group. This last value is
599 only really useful if the threads in this group are on the
600 same disk, since they are then competing for disk access.
601cpu= CPU usage. User and system time, along with the number
602 of context switches this thread went through.
71619dc2
JA
603IO depths= The distribution of io depths over the job life time. The
604 numbers are divided into powers of 2, so for example the
605 16= entries includes depths up to that value but higher
606 than the previous entry. In other words, it covers the
607 range from 16 to 31.
ec118304
JA
608IO latencies= The distribution of IO completion latencies. This is the
609 time from when IO leaves fio and when it gets completed.
610 The numbers follow the same pattern as the IO depths,
611 meaning that 2=1.6% means that 1.6% of the IO completed
8abdce66
JA
612 within 2 msecs, 20=12.8% means that 12.8% of the IO
613 took more than 10 msecs, but less than (or equal to) 20 msecs.
71bfa161
JA
614
615After each client has been listed, the group statistics are printed. They
616will look like this:
617
618Run status group 0 (all jobs):
619 READ: io=64MiB, aggrb=22178, minb=11355, maxb=11814, mint=2840msec, maxt=2955msec
620 WRITE: io=64MiB, aggrb=1302, minb=666, maxb=669, mint=50093msec, maxt=50320msec
621
622For each data direction, it prints:
623
624io= Number of megabytes io performed.
625aggrb= Aggregate bandwidth of threads in this group.
626minb= The minimum average bandwidth a thread saw.
627maxb= The maximum average bandwidth a thread saw.
628mint= The smallest runtime of the threads in that group.
629maxt= The longest runtime of the threads in that group.
630
631And finally, the disk statistics are printed. They will look like this:
632
633Disk stats (read/write):
634 sda: ios=16398/16511, merge=30/162, ticks=6853/819634, in_queue=826487, util=100.00%
635
636Each value is printed for both reads and writes, with reads first. The
637numbers denote:
638
639ios= Number of ios performed by all groups.
640merge= Number of merges io the io scheduler.
641ticks= Number of ticks we kept the disk busy.
642io_queue= Total time spent in the disk queue.
643util= The disk utilization. A value of 100% means we kept the disk
644 busy constantly, 50% would be a disk idling half of the time.
645
646
6477.0 Terse output
648----------------
649
650For scripted usage where you typically want to generate tables or graphs
6c219763 651of the results, fio can output the results in a comma separated format.
71bfa161
JA
652The format is one long line of values, such as:
653
654client1,0,0,936,331,2894,0,0,0.000000,0.000000,1,170,22.115385,34.290410,16,714,84.252874%,366.500000,566.417819,3496,1237,2894,0,0,0.000000,0.000000,0,246,6.671625,21.436952,0,2534,55.465300%,1406.600000,2008.044216,0.000000%,0.431928%,1109
655
656Split up, the format is as follows:
657
658 jobname, groupid, error
659 READ status:
660 KiB IO, bandwidth (KiB/sec), runtime (msec)
661 Submission latency: min, max, mean, deviation
662 Completion latency: min, max, mean, deviation
6c219763 663 Bw: min, max, aggregate percentage of total, mean, deviation
71bfa161
JA
664 WRITE status:
665 KiB IO, bandwidth (KiB/sec), runtime (msec)
666 Submission latency: min, max, mean, deviation
667 Completion latency: min, max, mean, deviation
6c219763 668 Bw: min, max, aggregate percentage of total, mean, deviation
71bfa161
JA
669 CPU usage: user, system, context switches
670