Only check FIO_DISKLESSIO in stat.c
[fio.git] / HOWTO
CommitLineData
71bfa161
JA
1Table of contents
2-----------------
3
41. Overview
52. How fio works
63. Running fio
74. Job file format
85. Detailed list of parameters
96. Normal output
107. Terse output
11
12
131.0 Overview and history
14------------------------
15fio was originally written to save me the hassle of writing special test
16case programs when I wanted to test a specific workload, either for
17performance reasons or to find/reproduce a bug. The process of writing
18such a test app can be tiresome, especially if you have to do it often.
19Hence I needed a tool that would be able to simulate a given io workload
20without resorting to writing a tailored test case again and again.
21
22A test work load is difficult to define, though. There can be any number
23of processes or threads involved, and they can each be using their own
24way of generating io. You could have someone dirtying large amounts of
25memory in an memory mapped file, or maybe several threads issuing
26reads using asynchronous io. fio needed to be flexible enough to
27simulate both of these cases, and many more.
28
292.0 How fio works
30-----------------
31The first step in getting fio to simulate a desired io workload, is
32writing a job file describing that specific setup. A job file may contain
33any number of threads and/or files - the typical contents of the job file
34is a global section defining shared parameters, and one or more job
35sections describing the jobs involved. When run, fio parses this file
36and sets everything up as described. If we break down a job from top to
37bottom, it contains the following basic parameters:
38
39 IO type Defines the io pattern issued to the file(s).
40 We may only be reading sequentially from this
41 file(s), or we may be writing randomly. Or even
42 mixing reads and writes, sequentially or randomly.
43
44 Block size In how large chunks are we issuing io? This may be
45 a single value, or it may describe a range of
46 block sizes.
47
48 IO size How much data are we going to be reading/writing.
49
50 IO engine How do we issue io? We could be memory mapping the
51 file, we could be using regular read/write, we
d0ff85df 52 could be using splice, async io, syslet, or even
71bfa161
JA
53 SG (SCSI generic sg).
54
6c219763 55 IO depth If the io engine is async, how large a queuing
71bfa161
JA
56 depth do we want to maintain?
57
58 IO type Should we be doing buffered io, or direct/raw io?
59
60 Num files How many files are we spreading the workload over.
61
62 Num threads How many threads or processes should we spread
63 this workload over.
64
65The above are the basic parameters defined for a workload, in addition
66there's a multitude of parameters that modify other aspects of how this
67job behaves.
68
69
703.0 Running fio
71---------------
72See the README file for command line parameters, there are only a few
73of them.
74
75Running fio is normally the easiest part - you just give it the job file
76(or job files) as parameters:
77
78$ fio job_file
79
80and it will start doing what the job_file tells it to do. You can give
81more than one job file on the command line, fio will serialize the running
82of those files. Internally that is the same as using the 'stonewall'
83parameter described the the parameter section.
84
b4692828
JA
85If the job file contains only one job, you may as well just give the
86parameters on the command line. The command line parameters are identical
87to the job parameters, with a few extra that control global parameters
88(see README). For example, for the job file parameter iodepth=2, the
c2b1e753
JA
89mirror command line option would be --iodepth 2 or --iodepth=2. You can
90also use the command line for giving more than one job entry. For each
91--name option that fio sees, it will start a new job with that name.
92Command line entries following a --name entry will apply to that job,
93until there are no more entries or a new --name entry is seen. This is
94similar to the job file options, where each option applies to the current
95job until a new [] job entry is seen.
b4692828 96
71bfa161
JA
97fio does not need to run as root, except if the files or devices specified
98in the job section requires that. Some other options may also be restricted,
6c219763 99such as memory locking, io scheduler switching, and decreasing the nice value.
71bfa161
JA
100
101
1024.0 Job file format
103-------------------
104As previously described, fio accepts one or more job files describing
105what it is supposed to do. The job file format is the classic ini file,
106where the names enclosed in [] brackets define the job name. You are free
107to use any ascii name you want, except 'global' which has special meaning.
108A global section sets defaults for the jobs described in that file. A job
109may override a global section parameter, and a job file may even have
110several global sections if so desired. A job is only affected by a global
65db0851
JA
111section residing above it. If the first character in a line is a ';' or a
112'#', the entire line is discarded as a comment.
71bfa161
JA
113
114So lets look at a really simple job file that define to threads, each
115randomly reading from a 128MiB file.
116
117; -- start job file --
118[global]
119rw=randread
120size=128m
121
122[job1]
123
124[job2]
125
126; -- end job file --
127
128As you can see, the job file sections themselves are empty as all the
129described parameters are shared. As no filename= option is given, fio
c2b1e753
JA
130makes up a filename for each of the jobs as it sees fit. On the command
131line, this job would look as follows:
132
133$ fio --name=global --rw=randread --size=128m --name=job1 --name=job2
134
71bfa161
JA
135
136Lets look at an example that have a number of processes writing randomly
137to files.
138
139; -- start job file --
140[random-writers]
141ioengine=libaio
142iodepth=4
143rw=randwrite
144bs=32k
145direct=0
146size=64m
147numjobs=4
148
149; -- end job file --
150
151Here we have no global section, as we only have one job defined anyway.
152We want to use async io here, with a depth of 4 for each file. We also
153increased the buffer size used to 32KiB and define numjobs to 4 to
154fork 4 identical jobs. The result is 4 processes each randomly writing
b4692828
JA
155to their own 64MiB file. Instead of using the above job file, you could
156have given the parameters on the command line. For this case, you would
157specify:
158
159$ fio --name=random-writers --ioengine=libaio --iodepth=4 --rw=randwrite --bs=32k --direct=0 --size=64m --numjobs=4
71bfa161
JA
160
161fio ships with a few example job files, you can also look there for
162inspiration.
163
164
1655.0 Detailed list of parameters
166-------------------------------
167
168This section describes in details each parameter associated with a job.
169Some parameters take an option of a given type, such as an integer or
170a string. The following types are used:
171
172str String. This is a sequence of alpha characters.
173int Integer. A whole number value, may be negative.
174siint SI integer. A whole number value, which may contain a postfix
175 describing the base of the number. Accepted postfixes are k/m/g,
6c219763 176 meaning kilo, mega, and giga. So if you want to specify 4096,
71bfa161
JA
177 you could either write out '4096' or just give 4k. The postfixes
178 signify base 2 values, so 1024 is 1k and 1024k is 1m and so on.
179bool Boolean. Usually parsed as an integer, however only defined for
180 true and false (1 and 0).
181irange Integer range with postfix. Allows value range to be given, such
0c9baf91
JA
182 as 1024-4096. A colon may also be used as the seperator, eg
183 1k:4k. If the option allows two sets of ranges, they can be
184 specified with a ',' or '/' delimiter: 1k-4k/8k-32k. Also see
185 siint.
71bfa161
JA
186
187With the above in mind, here follows the complete list of fio job
188parameters.
189
190name=str ASCII name of the job. This may be used to override the
191 name printed by fio for this job. Otherwise the job
c2b1e753 192 name is used. On the command line this parameter has the
6c219763 193 special purpose of also signaling the start of a new
c2b1e753 194 job.
71bfa161 195
61697c37
JA
196description=str Text description of the job. Doesn't do anything except
197 dump this text description when this job is run. It's
198 not parsed.
199
71bfa161
JA
200directory=str Prefix filenames with this directory. Used to places files
201 in a different location than "./".
202
203filename=str Fio normally makes up a filename based on the job name,
204 thread number, and file number. If you want to share
205 files between threads in a job or several jobs, specify
ed92ac0c
JA
206 a filename for each of them to override the default. If
207 the ioengine used is 'net', the filename is the host and
208 port to connect to in the format of =host:port.
71bfa161
JA
209
210rw=str Type of io pattern. Accepted values are:
211
212 read Sequential reads
213 write Sequential writes
214 randwrite Random writes
215 randread Random reads
216 rw Sequential mixed reads and writes
217 randrw Random mixed reads and writes
218
219 For the mixed io types, the default is to split them 50/50.
220 For certain types of io the result may still be skewed a bit,
221 since the speed may be different.
222
ee738499
JA
223randrepeat=bool For random IO workloads, seed the generator in a predictable
224 way so that results are repeatable across repetitions.
225
71bfa161
JA
226size=siint The total size of file io for this job. This may describe
227 the size of the single file the job uses, or it may be
228 divided between the number of files in the job. If the
229 file already exists, the file size will be adjusted to this
230 size if larger than the current file size. If this parameter
231 is not given and the file exists, the file size will be used.
232
f90eff5a
JA
233bs=siint The block size used for the io units. Defaults to 4k. Values
234 can be given for both read and writes. If a single siint is
235 given, it will apply to both. If a second siint is specified
236 after a comma, it will apply to writes only. In other words,
237 the format is either bs=read_and_write or bs=read,write.
238 bs=4k,8k will thus use 4k blocks for reads, and 8k blocks
787f7e95
JA
239 for writes. If you only wish to set the write size, you
240 can do so by passing an empty read size - bs=,8k will set
241 8k for writes and leave the read default value.
a00735e6 242
71bfa161
JA
243bsrange=irange Instead of giving a single block size, specify a range
244 and fio will mix the issued io block sizes. The issued
245 io unit will always be a multiple of the minimum value
f90eff5a
JA
246 given (also see bs_unaligned). Applies to both reads and
247 writes, however a second range can be given after a comma.
248 See bs=.
a00735e6 249
690adba3
JA
250bs_unaligned If this option is given, any byte size value within bsrange
251 may be used as a block range. This typically wont work with
252 direct IO, as that normally requires sector alignment.
71bfa161
JA
253
254nrfiles=int Number of files to use for this job. Defaults to 1.
255
256ioengine=str Defines how the job issues io to the file. The following
257 types are defined:
258
259 sync Basic read(2) or write(2) io. lseek(2) is
260 used to position the io location.
261
262 libaio Linux native asynchronous io.
263
264 posixaio glibc posix asynchronous io.
265
266 mmap File is memory mapped and data copied
267 to/from using memcpy(3).
268
269 splice splice(2) is used to transfer the data and
270 vmsplice(2) to transfer data from user
271 space to the kernel.
272
d0ff85df
JA
273 syslet-rw Use the syslet system calls to make
274 regular read/write async.
275
71bfa161 276 sg SCSI generic sg v3 io. May either be
6c219763 277 synchronous using the SG_IO ioctl, or if
71bfa161
JA
278 the target is an sg character device
279 we use read(2) and write(2) for asynchronous
280 io.
281
a94ea28b
JA
282 null Doesn't transfer any data, just pretends
283 to. This is mainly used to exercise fio
284 itself and for debugging/testing purposes.
285
ed92ac0c
JA
286 net Transfer over the network to given host:port.
287 'filename' must be set appropriately to
288 filename=host:port regardless of send
289 or receive, if the latter only the port
290 argument is used.
291
8a7bd877
JA
292 external Prefix to specify loading an external
293 IO engine object file. Append the engine
294 filename, eg ioengine=external:/tmp/foo.o
295 to load ioengine foo.o in /tmp.
296
71bfa161
JA
297iodepth=int This defines how many io units to keep in flight against
298 the file. The default is 1 for each file defined in this
299 job, can be overridden with a larger value for higher
300 concurrency.
301
cb5ab512
JA
302iodepth_batch=int This defines how many pieces of IO to submit at once.
303 It defaults to the same as iodepth, but can be set lower
304 if one so desires.
305
e916b390
JA
306iodepth_low=int The low water mark indicating when to start filling
307 the queue again. Defaults to the same as iodepth, meaning
308 that fio will attempt to keep the queue full at all times.
309 If iodepth is set to eg 16 and iodepth_low is set to 4, then
310 after fio has filled the queue of 16 requests, it will let
311 the depth drain down to 4 before starting to fill it again.
312
71bfa161 313direct=bool If value is true, use non-buffered io. This is usually
76a43db4
JA
314 O_DIRECT.
315
316buffered=bool If value is true, use buffered io. This is the opposite
317 of the 'direct' option. Defaults to true.
71bfa161
JA
318
319offset=siint Start io at the given offset in the file. The data before
320 the given offset will not be touched. This effectively
321 caps the file size at real_size - offset.
322
323fsync=int If writing to a file, issue a sync of the dirty data
324 for every number of blocks given. For example, if you give
325 32 as a parameter, fio will sync the file for every 32
326 writes issued. If fio is using non-buffered io, we may
327 not sync the file. The exception is the sg io engine, which
6c219763 328 synchronizes the disk cache anyway.
71bfa161
JA
329
330overwrite=bool If writing to a file, setup the file first and do overwrites.
331
332end_fsync=bool If true, fsync file contents when the job exits.
333
6c219763 334rwmixcycle=int Value in milliseconds describing how often to switch between
71bfa161
JA
335 reads and writes for a mixed workload. The default is
336 500 msecs.
337
338rwmixread=int How large a percentage of the mix should be reads.
339
340rwmixwrite=int How large a percentage of the mix should be writes. If both
341 rwmixread and rwmixwrite is given and the values do not add
342 up to 100%, the latter of the two will be used to override
343 the first.
344
bb8895e0
JA
345norandommap Normally fio will cover every block of the file when doing
346 random IO. If this option is given, fio will just get a
347 new random offset without looking at past io history. This
348 means that some blocks may not be read or written, and that
349 some blocks may be read/written more than once. This option
350 is mutually exclusive with verify= for that reason.
351
71bfa161
JA
352nice=int Run the job with the given nice value. See man nice(2).
353
354prio=int Set the io priority value of this job. Linux limits us to
355 a positive value between 0 and 7, with 0 being the highest.
356 See man ionice(1).
357
358prioclass=int Set the io priority class. See man ionice(1).
359
360thinktime=int Stall the job x microseconds after an io has completed before
361 issuing the next. May be used to simulate processing being
48097d5c
JA
362 done by an application. See thinktime_blocks and
363 thinktime_spin.
364
365thinktime_spin=int
366 Only valid if thinktime is set - pretend to spend CPU time
367 doing something with the data received, before falling back
368 to sleeping for the rest of the period specified by
369 thinktime.
9c1f7434
JA
370
371thinktime_blocks
372 Only valid if thinktime is set - control how many blocks
373 to issue, before waiting 'thinktime' usecs. If not set,
374 defaults to 1 which will make fio wait 'thinktime' usecs
375 after every block.
71bfa161
JA
376
377rate=int Cap the bandwidth used by this job to this number of KiB/sec.
378
379ratemin=int Tell fio to do whatever it can to maintain at least this
380 bandwidth.
381
382ratecycle=int Average bandwidth for 'rate' and 'ratemin' over this number
6c219763 383 of milliseconds.
71bfa161
JA
384
385cpumask=int Set the CPU affinity of this job. The parameter given is a
386 bitmask of allowed CPU's the job may run on. See man
387 sched_setaffinity(2).
388
389startdelay=int Start this job the specified number of seconds after fio
390 has started. Only useful if the job file contains several
391 jobs, and you want to delay starting some jobs to a certain
392 time.
393
03b74b3e 394runtime=int Tell fio to terminate processing after the specified number
71bfa161
JA
395 of seconds. It can be quite hard to determine for how long
396 a specified job will run, so this parameter is handy to
397 cap the total runtime to a given time.
398
399invalidate=bool Invalidate the buffer/page cache parts for this file prior
400 to starting io. Defaults to true.
401
402sync=bool Use sync io for buffered writes. For the majority of the
403 io engines, this means using O_SYNC.
404
405mem=str Fio can use various types of memory as the io unit buffer.
406 The allowed values are:
407
408 malloc Use memory from malloc(3) as the buffers.
409
410 shm Use shared memory as the buffers. Allocated
411 through shmget(2).
412
74b025b0
JA
413 shmhuge Same as shm, but use huge pages as backing.
414
313cb206
JA
415 mmap Use mmap to allocate buffers. May either be
416 anonymous memory, or can be file backed if
417 a filename is given after the option. The
418 format is mem=mmap:/path/to/file.
71bfa161 419
d0bdaf49
JA
420 mmaphuge Use a memory mapped huge file as the buffer
421 backing. Append filename after mmaphuge, ala
422 mem=mmaphuge:/hugetlbfs/file
423
71bfa161 424 The area allocated is a function of the maximum allowed
5394ae5f
JA
425 bs size for the job, multiplied by the io depth given. Note
426 that for shmhuge and mmaphuge to work, the system must have
427 free huge pages allocated. This can normally be checked
428 and set by reading/writing /proc/sys/vm/nr_hugepages on a
429 Linux system. Fio assumes a huge page is 4MiB in size. So
430 to calculate the number of huge pages you need for a given
431 job file, add up the io depth of all jobs (normally one unless
432 iodepth= is used) and multiply by the maximum bs set. Then
433 divide that number by the huge page size. You can see the
434 size of the huge pages in /proc/meminfo. If no huge pages
435 are allocated by having a non-zero number in nr_hugepages,
56bb17f2 436 using mmaphuge or shmhuge will fail. Also see hugepage-size.
5394ae5f
JA
437
438 mmaphuge also needs to have hugetlbfs mounted and the file
439 location should point there. So if it's mounted in /huge,
440 you would use mem=mmaphuge:/huge/somefile.
71bfa161 441
56bb17f2
JA
442hugepage-size=siint
443 Defines the size of a huge page. Must at least be equal
444 to the system setting, see /proc/meminfo. Defaults to 4MiB.
c51074e7
JA
445 Should probably always be a multiple of megabytes, so using
446 hugepage-size=Xm is the preferred way to set this to avoid
447 setting a non-pow-2 bad value.
56bb17f2 448
71bfa161
JA
449exitall When one job finishes, terminate the rest. The default is
450 to wait for each job to finish, sometimes that is not the
451 desired action.
452
453bwavgtime=int Average the calculated bandwidth over the given time. Value
6c219763 454 is specified in milliseconds.
71bfa161
JA
455
456create_serialize=bool If true, serialize the file creating for the jobs.
457 This may be handy to avoid interleaving of data
458 files, which may greatly depend on the filesystem
459 used and even the number of processors in the system.
460
461create_fsync=bool fsync the data file after creation. This is the
462 default.
463
e545a6ce
JA
464unlink=bool Unlink the job files when done. Not the default, as repeated
465 runs of that job would then waste time recreating the fileset
466 again and again.
71bfa161
JA
467
468loops=int Run the specified number of iterations of this job. Used
469 to repeat the same workload a given number of times. Defaults
470 to 1.
471
472verify=str If writing to a file, fio can verify the file contents
473 after each iteration of the job. The allowed values are:
474
475 md5 Use an md5 sum of the data area and store
476 it in the header of each block.
477
478 crc32 Use a crc32 sum of the data area and store
479 it in the header of each block.
480
6c219763 481 This option can be used for repeated burn-in tests of a
71bfa161
JA
482 system to make sure that the written data is also
483 correctly read back.
484
485stonewall Wait for preceeding jobs in the job file to exit, before
486 starting this one. Can be used to insert serialization
487 points in the job file.
488
489numjobs=int Create the specified number of clones of this job. May be
490 used to setup a larger number of threads/processes doing
491 the same thing.
492
493thread fio defaults to forking jobs, however if this option is
494 given, fio will use pthread_create(3) to create threads
495 instead.
496
497zonesize=siint Divide a file into zones of the specified size. See zoneskip.
498
499zoneskip=siint Skip the specified number of bytes when zonesize data has
500 been read. The two zone options can be used to only do
501 io on zones of a file.
502
076efc7c
JA
503write_iolog=str Write the issued io patterns to the specified file. See
504 read_iolog.
71bfa161 505
076efc7c 506read_iolog=str Open an iolog with the specified file name and replay the
71bfa161
JA
507 io patterns it contains. This can be used to store a
508 workload and replay it sometime later.
509
510write_bw_log If given, write a bandwidth log of the jobs in this job
511 file. Can be used to store data of the bandwidth of the
e0da9bc2
JA
512 jobs in their lifetime. The included fio_generate_plots
513 script uses gnuplot to turn these text files into nice
514 graphs.
71bfa161
JA
515
516write_lat_log Same as write_bw_log, except that this option stores io
517 completion latencies instead.
518
519lockmem=siint Pin down the specified amount of memory with mlock(2). Can
520 potentially be used instead of removing memory or booting
521 with less memory to simulate a smaller amount of memory.
522
523exec_prerun=str Before running this job, issue the command specified
524 through system(3).
525
526exec_postrun=str After the job completes, issue the command specified
527 though system(3).
528
529ioscheduler=str Attempt to switch the device hosting the file to the specified
530 io scheduler before running.
531
532cpuload=int If the job is a CPU cycle eater, attempt to use the specified
533 percentage of CPU cycles.
534
535cpuchunks=int If the job is a CPU cycle eater, split the load into
6c219763 536 cycles of the given time. In milliseconds.
71bfa161
JA
537
538
5396.0 Interpreting the output
540---------------------------
541
542fio spits out a lot of output. While running, fio will display the
543status of the jobs created. An example of that would be:
544
73c8b082 545Threads: 1: [_r] [24.8% done] [ 13509/ 8334 kb/s] [eta 00h:01m:31s]
71bfa161
JA
546
547The characters inside the square brackets denote the current status of
548each thread. The possible values (in typical life cycle order) are:
549
550Idle Run
551---- ---
552P Thread setup, but not started.
553C Thread created.
554I Thread initialized, waiting.
555 R Running, doing sequential reads.
556 r Running, doing random reads.
557 W Running, doing sequential writes.
558 w Running, doing random writes.
559 M Running, doing mixed sequential reads/writes.
560 m Running, doing mixed random reads/writes.
561 F Running, currently waiting for fsync()
562V Running, doing verification of written data.
563E Thread exited, not reaped by main thread yet.
564_ Thread reaped.
565
566The other values are fairly self explanatory - number of threads
6043c579
JA
567currently running and doing io, rate of io since last check, and the estimated
568completion percentage and time for the running group. It's impossible to
569estimate runtime of the following groups (if any).
71bfa161
JA
570
571When fio is done (or interrupted by ctrl-c), it will show the data for
572each thread, group of threads, and disks in that order. For each data
573direction, the output looks like:
574
575Client1 (g=0): err= 0:
576 write: io= 32MiB, bw= 666KiB/s, runt= 50320msec
6104ddb6
JA
577 slat (msec): min= 0, max= 136, avg= 0.03, stdev= 1.92
578 clat (msec): min= 0, max= 631, avg=48.50, stdev=86.82
579 bw (KiB/s) : min= 0, max= 1196, per=51.00%, avg=664.02, stdev=681.68
71bfa161 580 cpu : usr=1.49%, sys=0.25%, ctx=7969
71619dc2 581 IO depths : 1=0.1%, 2=0.3%, 4=0.5%, 8=99.0%, 16=0.0%, 32=0.0%, >32=0.0%
8abdce66
JA
582 lat (msec): 2=1.6%, 4=0.0%, 10=3.2%, 20=12.8%, 50=38.4%, 100=24.8%,
583 lat (msec): 250=15.2%, 500=0.0%, 750=0.0%, 1000=0.0%, >=2048=0.0%
71bfa161
JA
584
585The client number is printed, along with the group id and error of that
586thread. Below is the io statistics, here for writes. In the order listed,
587they denote:
588
589io= Number of megabytes io performed
590bw= Average bandwidth rate
591runt= The runtime of that thread
592 slat= Submission latency (avg being the average, dev being the
593 standard deviation). This is the time it took to submit
594 the io. For sync io, the slat is really the completion
595 latency, since queue/complete is one operation there.
596 clat= Completion latency. Same names as slat, this denotes the
597 time from submission to completion of the io pieces. For
598 sync io, clat will usually be equal (or very close) to 0,
599 as the time from submit to complete is basically just
600 CPU time (io has already been done, see slat explanation).
601 bw= Bandwidth. Same names as the xlat stats, but also includes
602 an approximate percentage of total aggregate bandwidth
603 this thread received in this group. This last value is
604 only really useful if the threads in this group are on the
605 same disk, since they are then competing for disk access.
606cpu= CPU usage. User and system time, along with the number
607 of context switches this thread went through.
71619dc2
JA
608IO depths= The distribution of io depths over the job life time. The
609 numbers are divided into powers of 2, so for example the
610 16= entries includes depths up to that value but higher
611 than the previous entry. In other words, it covers the
612 range from 16 to 31.
ec118304
JA
613IO latencies= The distribution of IO completion latencies. This is the
614 time from when IO leaves fio and when it gets completed.
615 The numbers follow the same pattern as the IO depths,
616 meaning that 2=1.6% means that 1.6% of the IO completed
8abdce66
JA
617 within 2 msecs, 20=12.8% means that 12.8% of the IO
618 took more than 10 msecs, but less than (or equal to) 20 msecs.
71bfa161
JA
619
620After each client has been listed, the group statistics are printed. They
621will look like this:
622
623Run status group 0 (all jobs):
624 READ: io=64MiB, aggrb=22178, minb=11355, maxb=11814, mint=2840msec, maxt=2955msec
625 WRITE: io=64MiB, aggrb=1302, minb=666, maxb=669, mint=50093msec, maxt=50320msec
626
627For each data direction, it prints:
628
629io= Number of megabytes io performed.
630aggrb= Aggregate bandwidth of threads in this group.
631minb= The minimum average bandwidth a thread saw.
632maxb= The maximum average bandwidth a thread saw.
633mint= The smallest runtime of the threads in that group.
634maxt= The longest runtime of the threads in that group.
635
636And finally, the disk statistics are printed. They will look like this:
637
638Disk stats (read/write):
639 sda: ios=16398/16511, merge=30/162, ticks=6853/819634, in_queue=826487, util=100.00%
640
641Each value is printed for both reads and writes, with reads first. The
642numbers denote:
643
644ios= Number of ios performed by all groups.
645merge= Number of merges io the io scheduler.
646ticks= Number of ticks we kept the disk busy.
647io_queue= Total time spent in the disk queue.
648util= The disk utilization. A value of 100% means we kept the disk
649 busy constantly, 50% would be a disk idling half of the time.
650
651
6527.0 Terse output
653----------------
654
655For scripted usage where you typically want to generate tables or graphs
6c219763 656of the results, fio can output the results in a comma separated format.
71bfa161
JA
657The format is one long line of values, such as:
658
659client1,0,0,936,331,2894,0,0,0.000000,0.000000,1,170,22.115385,34.290410,16,714,84.252874%,366.500000,566.417819,3496,1237,2894,0,0,0.000000,0.000000,0,246,6.671625,21.436952,0,2534,55.465300%,1406.600000,2008.044216,0.000000%,0.431928%,1109
660
661Split up, the format is as follows:
662
663 jobname, groupid, error
664 READ status:
665 KiB IO, bandwidth (KiB/sec), runtime (msec)
666 Submission latency: min, max, mean, deviation
667 Completion latency: min, max, mean, deviation
6c219763 668 Bw: min, max, aggregate percentage of total, mean, deviation
71bfa161
JA
669 WRITE status:
670 KiB IO, bandwidth (KiB/sec), runtime (msec)
671 Submission latency: min, max, mean, deviation
672 Completion latency: min, max, mean, deviation
6c219763 673 Bw: min, max, aggregate percentage of total, mean, deviation
71bfa161
JA
674 CPU usage: user, system, context switches
675