From fdbbe6cf6dce1879b214fb19085bb79a916c97ac Mon Sep 17 00:00:00 2001 From: Yangbo Lu Date: Thu, 14 Nov 2019 19:18:14 +0800 Subject: [PATCH] mmc: sdhci: fix up CMD12 sending The STOP command is disabled for multiple blocks r/w commands with auto CMD12, when start to send. However, if there is data error, software still needs to send CMD12 according to SD spec. This patch is to allow software CMD12 sending for this case. Signed-off-by: Yangbo Lu Acked-by: Adrian Hunter Link: https://lore.kernel.org/r/20191114111814.35199-1-yangbo.lu@nxp.com Signed-off-by: Ulf Hansson --- drivers/mmc/host/sdhci.c | 17 +++-------------- 1 file changed, 3 insertions(+), 14 deletions(-) diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 3140fe2e5dba..012b1d9145b9 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -1326,12 +1326,12 @@ static void sdhci_finish_data(struct sdhci_host *host) /* * Need to send CMD12 if - - * a) open-ended multiblock transfer (no CMD23) + * a) open-ended multiblock transfer not using auto CMD12 (no CMD23) * b) error in multiblock transfer */ if (data->stop && - (data->error || - !data->mrq->sbc)) { + ((!data->mrq->sbc && !sdhci_auto_cmd12(host, data->mrq)) || + data->error)) { /* * 'cap_cmd_during_tfr' request must not use the command line * after mmc_command_done() has been called. It is upper layer's @@ -1825,17 +1825,6 @@ void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq) sdhci_led_activate(host); - /* - * Ensure we don't send the STOP for non-SET_BLOCK_COUNTED - * requests if Auto-CMD12 is enabled. - */ - if (sdhci_auto_cmd12(host, mrq)) { - if (mrq->stop) { - mrq->data->stop = NULL; - mrq->stop = NULL; - } - } - if (!present || host->flags & SDHCI_DEVICE_DEAD) { mrq->cmd->error = -ENOMEDIUM; sdhci_finish_mrq(host, mrq); -- 2.25.1