From f29077d8665221ba2802a29ee7bd9fcef66cde81 Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Wed, 23 Nov 2022 10:43:42 +0000 Subject: [PATCH] arm64: dts: qcom: sc8280xp-x13s: Add soundcard support Add support for SoundCard on X13s. This patch adds support for Headset Playback, record and 2 DMICs on the Panel along with the regulators required for powering up the LPASS codecs. Signed-off-by: Srinivas Kandagatla Reviewed-by: Krzysztof Kozlowski Reviewed-by: Konrad Dybcio Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20221123104342.26140-4-srinivas.kandagatla@linaro.org --- .../qcom/sc8280xp-lenovo-thinkpad-x13s.dts | 213 ++++++++++++++++++ 1 file changed, 213 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts index 568c6be1ceaa..eefa22ea1ed7 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts +++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts @@ -172,6 +172,14 @@ regulator-boot-on; }; + + vreg_vph_pwr: regulator-vph-pwr { + compatible = "regulator-fixed"; + regulator-name = "VPH_VCC3R9"; + regulator-min-microvolt = <3900000>; + regulator-max-microvolt = <3900000>; + regulator-always-on; + }; }; &apps_rsc { @@ -181,6 +189,13 @@ vdd-l3-l5-supply = <&vreg_s11b>; + vreg_s10b: smps10 { + regulator-name = "vreg_s10b"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + vreg_s11b: smps11 { regulator-name = "vreg_s11b"; regulator-min-microvolt = <1272000>; @@ -188,6 +203,13 @@ regulator-initial-mode = ; }; + vreg_s12b: smps12 { + regulator-name = "vreg_s12b"; + regulator-min-microvolt = <984000>; + regulator-max-microvolt = <984000>; + regulator-initial-mode = ; + }; + vreg_l3b: ldo3 { regulator-name = "vreg_l3b"; regulator-min-microvolt = <1200000>; @@ -216,6 +238,7 @@ pmc8280c-rpmh-regulators { compatible = "qcom,pm8350c-rpmh-regulators"; qcom,pmic-id = "c"; + vdd-bob-supply = <&vreg_vph_pwr>; vreg_l1c: ldo1 { regulator-name = "vreg_l1c"; @@ -237,6 +260,13 @@ regulator-max-microvolt = <3072000>; regulator-initial-mode = ; }; + + vreg_bob: bob { + regulator-name = "vreg_bob"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = ; + }; }; pmc8280-2-rpmh-regulators { @@ -596,6 +626,161 @@ status = "okay"; }; +&soc { + wcd938x: codec { + compatible = "qcom,wcd9380-codec"; + pinctrl-names = "default"; + pinctrl-0 = <&wcd_default>; + reset-gpios = <&tlmm 106 GPIO_ACTIVE_LOW>; + #sound-dai-cells = <1>; + + vdd-buck-supply = <&vreg_s10b>; + vdd-rxtx-supply = <&vreg_s10b>; + vdd-io-supply = <&vreg_s10b>; + vdd-mic-bias-supply = <&vreg_bob>; + qcom,micbias1-microvolt = <1800000>; + qcom,micbias2-microvolt = <1800000>; + qcom,micbias3-microvolt = <1800000>; + qcom,micbias4-microvolt = <1800000>; + qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>; + qcom,mbhc-headset-vthreshold-microvolt = <1700000>; + qcom,mbhc-headphone-vthreshold-microvolt = <50000>; + qcom,rx-device = <&wcd_rx>; + qcom,tx-device = <&wcd_tx>; + }; +}; + +&sound { + compatible = "qcom,sc8280xp-sndcard"; + model = "SC8280XP-LENOVO-X13S"; + audio-routing = + "SpkrLeft IN", "WSA_SPK1 OUT", + "SpkrRight IN", "WSA_SPK2 OUT", + "IN1_HPHL", "HPHL_OUT", + "IN2_HPHR", "HPHR_OUT", + "AMIC2", "MIC BIAS2", + "VA DMIC0", "MIC BIAS1", + "VA DMIC1", "MIC BIAS1", + "VA DMIC2", "MIC BIAS3", + "TX DMIC0", "MIC BIAS1", + "TX DMIC1", "MIC BIAS2", + "TX DMIC2", "MIC BIAS3", + "TX SWR_ADC1", "ADC2_OUTPUT"; + + wcd-playback-dai-link { + link-name = "WCD Playback"; + cpu { + sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>; + }; + + codec { + sound-dai = <&wcd938x 0>, <&swr1 0>, <&rxmacro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + wcd-capture-dai-link { + link-name = "WCD Capture"; + cpu { + sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>; + }; + + codec { + sound-dai = <&wcd938x 1>, <&swr2 0>, <&txmacro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + wsa-dai-link { + link-name = "WSA Playback"; + cpu { + sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>; + }; + + codec { + sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&wsamacro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + va-dai-link { + link-name = "VA Capture"; + cpu { + sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>; + }; + + platform { + sound-dai = <&q6apm>; + }; + + codec { + sound-dai = <&vamacro 0>; + }; + }; +}; + +&swr0 { + left_spkr: wsa8830-left@0,1 { + compatible = "sdw10217020200"; + reg = <0 1>; + pinctrl-names = "default"; + pinctrl-0 = <&spkr_1_sd_n_default>; + powerdown-gpios = <&tlmm 178 GPIO_ACTIVE_LOW>; + #thermal-sensor-cells = <0>; + sound-name-prefix = "SpkrLeft"; + #sound-dai-cells = <0>; + vdd-supply = <&vreg_s10b>; + }; + + right_spkr: wsa8830-right@0,2{ + compatible = "sdw10217020200"; + reg = <0 2>; + pinctrl-names = "default"; + pinctrl-0 = <&spkr_2_sd_n_default>; + powerdown-gpios = <&tlmm 179 GPIO_ACTIVE_LOW>; + #thermal-sensor-cells = <0>; + sound-name-prefix = "SpkrRight"; + #sound-dai-cells = <0>; + vdd-supply = <&vreg_s10b>; + }; +}; + +&swr1 { + status = "okay"; + + wcd_rx: wcd9380-rx@0,4 { + compatible = "sdw20217010d00"; + reg = <0 4>; + qcom,rx-port-mapping = <1 2 3 4 5>; + }; +}; + +&swr2 { + status = "okay"; + + wcd_tx: wcd9380-tx@0,3 { + compatible = "sdw20217010d00"; + reg = <0 3>; + qcom,tx-port-mapping = <1 1 2 3>; + }; +}; + +&vamacro { + pinctrl-0 = <&dmic01_default>, <&dmic02_default>; + pinctrl-names = "default"; + vdd-micb-supply = <&vreg_s10b>; + qcom,dmic-sample-rate = <600000>; +}; + &usb_0 { status = "okay"; }; @@ -808,6 +993,26 @@ drive-strength = <16>; }; + spkr_1_sd_n_default: spkr-1-sd-n-default-state { + perst-n-pins { + pins = "gpio178"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-high; + }; + }; + + spkr_2_sd_n_default: spkr-2-sd-n-default-state { + perst-n-pins { + pins = "gpio179"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-high; + }; + }; + tpad_default: tpad-default-state { int-n-pins { pins = "gpio182"; @@ -830,4 +1035,12 @@ drive-strength = <16>; }; }; + + wcd_default: wcd-default-state { + reset-pins { + pins = "gpio106"; + function = "gpio"; + bias-disable; + }; + }; }; -- 2.25.1