From c28dac5d3a6e87615d4c8e50f574c320172a3d55 Mon Sep 17 00:00:00 2001 From: Claudiu Beznea Date: Tue, 10 Dec 2024 19:09:47 +0200 Subject: [PATCH] ASoC: dt-bindings: renesas,rz-ssi: Remove DMA description Remove the DMA description, as it duplicates content from ../dma/renesas,rz-dma.yaml. Additionally, remove the MID/RID examples mentioned in the dropped description (this information is already documented in the hardware manual). Suggested-by: Geert Uytterhoeven Signed-off-by: Claudiu Beznea Link: https://patch.msgid.link/20241210170953.2936724-19-claudiu.beznea.uj@bp.renesas.com Signed-off-by: Mark Brown --- .../bindings/sound/renesas,rz-ssi.yaml | 18 ------------------ 1 file changed, 18 deletions(-) diff --git a/Documentation/devicetree/bindings/sound/renesas,rz-ssi.yaml b/Documentation/devicetree/bindings/sound/renesas,rz-ssi.yaml index f4610eaed1e1..5b42eec864f8 100644 --- a/Documentation/devicetree/bindings/sound/renesas,rz-ssi.yaml +++ b/Documentation/devicetree/bindings/sound/renesas,rz-ssi.yaml @@ -57,24 +57,6 @@ properties: dmas: minItems: 1 maxItems: 2 - description: - The first cell represents a phandle to dmac. - The second cell specifies the encoded MID/RID values of the SSI port - connected to the DMA client and the slave channel configuration - parameters. - bits[0:9] - Specifies MID/RID value of a SSI channel as below - MID/RID value of SSI rx0 = 0x256 - MID/RID value of SSI tx0 = 0x255 - MID/RID value of SSI rx1 = 0x25a - MID/RID value of SSI tx1 = 0x259 - MID/RID value of SSI rt2 = 0x25f - MID/RID value of SSI rx3 = 0x262 - MID/RID value of SSI tx3 = 0x261 - bit[10] - HIEN = 1, Detects a request in response to the rising edge - of the signal - bit[11] - LVL = 0, Detects based on the edge - bits[12:14] - AM = 2, Bus cycle mode - bit[15] - TM = 0, Single transfer mode dma-names: oneOf: -- 2.25.1