From afa2b78f1e58eaca820f32c124e5655f43583eb1 Mon Sep 17 00:00:00 2001
From: Joe Sandom <joe.g.sandom@gmail.com>
Date: Wed, 21 Apr 2021 23:13:30 +0100
Subject: [PATCH] dt-bindings: iio: light: Added AMS tsl2591 device tree
 binding

Device tree binding for AMS/TAOS tsl2591 ambient light sensor.

This driver supports configuration via device tree and sysfs.
Supported channels for raw infrared light intensity,
raw combined light intensity and illuminance in lux.
The driver additionally supports iio events on lower and
upper thresholds.

This is a very-high sensitivity light-to-digital converter that
transforms light intensity into a digital signal.

Signed-off-by: Joe Sandom <joe.g.sandom@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20210421221330.17007-2-joe.g.sandom@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 .../bindings/iio/light/amstaos,tsl2591.yaml   | 50 +++++++++++++++++++
 1 file changed, 50 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/light/amstaos,tsl2591.yaml

diff --git a/Documentation/devicetree/bindings/iio/light/amstaos,tsl2591.yaml b/Documentation/devicetree/bindings/iio/light/amstaos,tsl2591.yaml
new file mode 100644
index 000000000000..83b88c6a243d
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/amstaos,tsl2591.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/amstaos,tsl2591.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AMS/TAOS TSL2591 Ambient Light Sensor (ALS)
+
+maintainers:
+  - Joe Sandom <joe.g.sandom@gmail.com>
+
+description: |
+  AMS/TAOS TSL2591 is a very-high sensitivity
+  light-to-digital converter that transforms light intensity into a digital
+  signal.
+
+properties:
+  compatible:
+    const: amstaos,tsl2591
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+    description:
+      Interrupt (INT:Pin 2) Active low. Should be set to IRQ_TYPE_EDGE_FALLING.
+      interrupt is used to detect if the light intensity has fallen below
+      or reached above the configured threshold values.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        tsl2591@29 {
+            compatible = "amstaos,tsl2591";
+            reg = <0x29>;
+            interrupts = <20 IRQ_TYPE_EDGE_FALLING>;
+       };
+    };
+...
-- 
2.25.1