From a9e849efca4f9c7732ea4a81f13ec96208994b22 Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Thu, 9 Dec 2021 11:04:55 +0200 Subject: [PATCH] mtd: rawnand: omap2: move to exec_op interface Stop using legacy interface and move to the exec_op interface. Signed-off-by: Roger Quadros Signed-off-by: Miquel Raynal Link: https://lore.kernel.org/linux-mtd/20211209090458.24830-4-rogerq@kernel.org --- drivers/mtd/nand/raw/omap2.c | 490 +++++++++++++++-------------------- 1 file changed, 211 insertions(+), 279 deletions(-) diff --git a/drivers/mtd/nand/raw/omap2.c b/drivers/mtd/nand/raw/omap2.c index b26d4947af02..224c91282c87 100644 --- a/drivers/mtd/nand/raw/omap2.c +++ b/drivers/mtd/nand/raw/omap2.c @@ -19,7 +19,7 @@ #include #include #include -#include +#include #include #include #include @@ -164,6 +164,7 @@ struct omap_nand_info { u_char *buf; int buf_len; /* Interface to GPMC */ + void __iomem *fifo; struct gpmc_nand_regs reg; struct gpmc_nand_ops *ops; bool flash_bbt; @@ -175,6 +176,11 @@ struct omap_nand_info { unsigned int nsteps_per_eccpg; unsigned int eccpg_size; unsigned int eccpg_bytes; + void (*data_in)(struct nand_chip *chip, void *buf, + unsigned int len, bool force_8bit); + void (*data_out)(struct nand_chip *chip, + const void *buf, unsigned int len, + bool force_8bit); }; static inline struct omap_nand_info *mtd_to_omap(struct mtd_info *mtd) @@ -182,6 +188,13 @@ static inline struct omap_nand_info *mtd_to_omap(struct mtd_info *mtd) return container_of(mtd_to_nand(mtd), struct omap_nand_info, nand); } +static void omap_nand_data_in(struct nand_chip *chip, void *buf, + unsigned int len, bool force_8bit); + +static void omap_nand_data_out(struct nand_chip *chip, + const void *buf, unsigned int len, + bool force_8bit); + /** * omap_prefetch_enable - configures and starts prefetch transfer * @cs: cs (chip select) number @@ -241,169 +254,70 @@ static int omap_prefetch_reset(int cs, struct omap_nand_info *info) } /** - * omap_hwcontrol - hardware specific access to control-lines - * @chip: NAND chip object - * @cmd: command to device - * @ctrl: - * NAND_NCE: bit 0 -> don't care - * NAND_CLE: bit 1 -> Command Latch - * NAND_ALE: bit 2 -> Address Latch - * - * NOTE: boards may use different bits for these!! + * omap_nand_data_in_pref - NAND data in using prefetch engine */ -static void omap_hwcontrol(struct nand_chip *chip, int cmd, unsigned int ctrl) +static void omap_nand_data_in_pref(struct nand_chip *chip, void *buf, + unsigned int len, bool force_8bit) { struct omap_nand_info *info = mtd_to_omap(nand_to_mtd(chip)); - - if (cmd != NAND_CMD_NONE) { - if (ctrl & NAND_CLE) - writeb(cmd, info->reg.gpmc_nand_command); - - else if (ctrl & NAND_ALE) - writeb(cmd, info->reg.gpmc_nand_address); - - else /* NAND_NCE */ - writeb(cmd, info->reg.gpmc_nand_data); - } -} - -/** - * omap_read_buf8 - read data from NAND controller into buffer - * @mtd: MTD device structure - * @buf: buffer to store date - * @len: number of bytes to read - */ -static void omap_read_buf8(struct mtd_info *mtd, u_char *buf, int len) -{ - struct nand_chip *nand = mtd_to_nand(mtd); - - ioread8_rep(nand->legacy.IO_ADDR_R, buf, len); -} - -/** - * omap_write_buf8 - write buffer to NAND controller - * @mtd: MTD device structure - * @buf: data buffer - * @len: number of bytes to write - */ -static void omap_write_buf8(struct mtd_info *mtd, const u_char *buf, int len) -{ - struct omap_nand_info *info = mtd_to_omap(mtd); - u_char *p = (u_char *)buf; - bool status; - - while (len--) { - iowrite8(*p++, info->nand.legacy.IO_ADDR_W); - /* wait until buffer is available for write */ - do { - status = info->ops->nand_writebuffer_empty(); - } while (!status); - } -} - -/** - * omap_read_buf16 - read data from NAND controller into buffer - * @mtd: MTD device structure - * @buf: buffer to store date - * @len: number of bytes to read - */ -static void omap_read_buf16(struct mtd_info *mtd, u_char *buf, int len) -{ - struct nand_chip *nand = mtd_to_nand(mtd); - - ioread16_rep(nand->legacy.IO_ADDR_R, buf, len / 2); -} - -/** - * omap_write_buf16 - write buffer to NAND controller - * @mtd: MTD device structure - * @buf: data buffer - * @len: number of bytes to write - */ -static void omap_write_buf16(struct mtd_info *mtd, const u_char * buf, int len) -{ - struct omap_nand_info *info = mtd_to_omap(mtd); - u16 *p = (u16 *) buf; - bool status; - /* FIXME try bursts of writesw() or DMA ... */ - len >>= 1; - - while (len--) { - iowrite16(*p++, info->nand.legacy.IO_ADDR_W); - /* wait until buffer is available for write */ - do { - status = info->ops->nand_writebuffer_empty(); - } while (!status); - } -} - -/** - * omap_read_buf_pref - read data from NAND controller into buffer - * @chip: NAND chip object - * @buf: buffer to store date - * @len: number of bytes to read - */ -static void omap_read_buf_pref(struct nand_chip *chip, u_char *buf, int len) -{ - struct mtd_info *mtd = nand_to_mtd(chip); - struct omap_nand_info *info = mtd_to_omap(mtd); uint32_t r_count = 0; int ret = 0; u32 *p = (u32 *)buf; + unsigned int pref_len; - /* take care of subpage reads */ - if (len % 4) { - if (info->nand.options & NAND_BUSWIDTH_16) - omap_read_buf16(mtd, buf, len % 4); - else - omap_read_buf8(mtd, buf, len % 4); - p = (u32 *) (buf + len % 4); - len -= len % 4; + if (force_8bit) { + omap_nand_data_in(chip, buf, len, force_8bit); + return; } + /* read 32-bit words using prefetch and remaining bytes normally */ + /* configure and start prefetch transfer */ + pref_len = len - (len & 3); ret = omap_prefetch_enable(info->gpmc_cs, - PREFETCH_FIFOTHRESHOLD_MAX, 0x0, len, 0x0, info); + PREFETCH_FIFOTHRESHOLD_MAX, 0x0, pref_len, 0x0, info); if (ret) { - /* PFPW engine is busy, use cpu copy method */ - if (info->nand.options & NAND_BUSWIDTH_16) - omap_read_buf16(mtd, (u_char *)p, len); - else - omap_read_buf8(mtd, (u_char *)p, len); + /* prefetch engine is busy, use CPU copy method */ + omap_nand_data_in(chip, buf, len, false); } else { do { r_count = readl(info->reg.gpmc_prefetch_status); r_count = PREFETCH_STATUS_FIFO_CNT(r_count); r_count = r_count >> 2; - ioread32_rep(info->nand.legacy.IO_ADDR_R, p, r_count); + ioread32_rep(info->fifo, p, r_count); p += r_count; - len -= r_count << 2; - } while (len); - /* disable and stop the PFPW engine */ + pref_len -= r_count << 2; + } while (pref_len); + /* disable and stop the Prefetch engine */ omap_prefetch_reset(info->gpmc_cs, info); + /* fetch any remaining bytes */ + if (len & 3) + omap_nand_data_in(chip, p, len & 3, false); } } /** - * omap_write_buf_pref - write buffer to NAND controller - * @chip: NAND chip object - * @buf: data buffer - * @len: number of bytes to write + * omap_nand_data_out_pref - NAND data out using Write Posting engine */ -static void omap_write_buf_pref(struct nand_chip *chip, const u_char *buf, - int len) +static void omap_nand_data_out_pref(struct nand_chip *chip, + const void *buf, unsigned int len, + bool force_8bit) { - struct mtd_info *mtd = nand_to_mtd(chip); - struct omap_nand_info *info = mtd_to_omap(mtd); + struct omap_nand_info *info = mtd_to_omap(nand_to_mtd(chip)); uint32_t w_count = 0; int i = 0, ret = 0; u16 *p = (u16 *)buf; unsigned long tim, limit; u32 val; + if (force_8bit) { + omap_nand_data_out(chip, buf, len, force_8bit); + return; + } + /* take care of subpage writes */ if (len % 2 != 0) { - writeb(*buf, info->nand.legacy.IO_ADDR_W); + writeb(*(u8 *)buf, info->fifo); p = (u16 *)(buf + 1); len--; } @@ -412,18 +326,15 @@ static void omap_write_buf_pref(struct nand_chip *chip, const u_char *buf, ret = omap_prefetch_enable(info->gpmc_cs, PREFETCH_FIFOTHRESHOLD_MAX, 0x0, len, 0x1, info); if (ret) { - /* PFPW engine is busy, use cpu copy method */ - if (info->nand.options & NAND_BUSWIDTH_16) - omap_write_buf16(mtd, (u_char *)p, len); - else - omap_write_buf8(mtd, (u_char *)p, len); + /* write posting engine is busy, use CPU copy method */ + omap_nand_data_out(chip, buf, len, false); } else { while (len) { w_count = readl(info->reg.gpmc_prefetch_status); w_count = PREFETCH_STATUS_FIFO_CNT(w_count); w_count = w_count >> 1; for (i = 0; (i < w_count) && len; i++, len -= 2) - iowrite16(*p++, info->nand.legacy.IO_ADDR_W); + iowrite16(*p++, info->fifo); } /* wait for data to flushed-out before reset the prefetch */ tim = 0; @@ -451,15 +362,16 @@ static void omap_nand_dma_callback(void *data) /* * omap_nand_dma_transfer: configure and start dma transfer - * @mtd: MTD device structure + * @chip: nand chip structure * @addr: virtual address in RAM of source/destination * @len: number of data bytes to be transferred * @is_write: flag for read/write operation */ -static inline int omap_nand_dma_transfer(struct mtd_info *mtd, void *addr, - unsigned int len, int is_write) +static inline int omap_nand_dma_transfer(struct nand_chip *chip, + const void *addr, unsigned int len, + int is_write) { - struct omap_nand_info *info = mtd_to_omap(mtd); + struct omap_nand_info *info = mtd_to_omap(nand_to_mtd(chip)); struct dma_async_tx_descriptor *tx; enum dma_data_direction dir = is_write ? DMA_TO_DEVICE : DMA_FROM_DEVICE; @@ -521,49 +433,41 @@ static inline int omap_nand_dma_transfer(struct mtd_info *mtd, void *addr, out_copy_unmap: dma_unmap_sg(info->dma->device->dev, &sg, 1, dir); out_copy: - if (info->nand.options & NAND_BUSWIDTH_16) - is_write == 0 ? omap_read_buf16(mtd, (u_char *) addr, len) - : omap_write_buf16(mtd, (u_char *) addr, len); - else - is_write == 0 ? omap_read_buf8(mtd, (u_char *) addr, len) - : omap_write_buf8(mtd, (u_char *) addr, len); + is_write == 0 ? omap_nand_data_in(chip, (void *)addr, len, false) + : omap_nand_data_out(chip, addr, len, false); + return 0; } /** - * omap_read_buf_dma_pref - read data from NAND controller into buffer - * @chip: NAND chip object - * @buf: buffer to store date - * @len: number of bytes to read + * omap_nand_data_in_dma_pref - NAND data in using DMA and Prefetch */ -static void omap_read_buf_dma_pref(struct nand_chip *chip, u_char *buf, - int len) +static void omap_nand_data_in_dma_pref(struct nand_chip *chip, void *buf, + unsigned int len, bool force_8bit) { struct mtd_info *mtd = nand_to_mtd(chip); if (len <= mtd->oobsize) - omap_read_buf_pref(chip, buf, len); + omap_nand_data_in_pref(chip, buf, len, false); else /* start transfer in DMA mode */ - omap_nand_dma_transfer(mtd, buf, len, 0x0); + omap_nand_dma_transfer(chip, buf, len, 0x0); } /** - * omap_write_buf_dma_pref - write buffer to NAND controller - * @chip: NAND chip object - * @buf: data buffer - * @len: number of bytes to write + * omap_nand_data_out_dma_pref - NAND data out using DMA and write posting */ -static void omap_write_buf_dma_pref(struct nand_chip *chip, const u_char *buf, - int len) +static void omap_nand_data_out_dma_pref(struct nand_chip *chip, + const void *buf, unsigned int len, + bool force_8bit) { struct mtd_info *mtd = nand_to_mtd(chip); if (len <= mtd->oobsize) - omap_write_buf_pref(chip, buf, len); + omap_nand_data_out_pref(chip, buf, len, false); else /* start transfer in DMA mode */ - omap_nand_dma_transfer(mtd, (u_char *)buf, len, 0x1); + omap_nand_dma_transfer(chip, buf, len, 0x1); } /* @@ -587,13 +491,13 @@ static irqreturn_t omap_nand_irq(int this_irq, void *dev) bytes = info->buf_len; else if (!info->buf_len) bytes = 0; - iowrite32_rep(info->nand.legacy.IO_ADDR_W, (u32 *)info->buf, + iowrite32_rep(info->fifo, (u32 *)info->buf, bytes >> 2); info->buf = info->buf + bytes; info->buf_len -= bytes; } else { - ioread32_rep(info->nand.legacy.IO_ADDR_R, (u32 *)info->buf, + ioread32_rep(info->fifo, (u32 *)info->buf, bytes >> 2); info->buf = info->buf + bytes; @@ -613,20 +517,17 @@ done: } /* - * omap_read_buf_irq_pref - read data from NAND controller into buffer - * @chip: NAND chip object - * @buf: buffer to store date - * @len: number of bytes to read + * omap_nand_data_in_irq_pref - NAND data in using Prefetch and IRQ */ -static void omap_read_buf_irq_pref(struct nand_chip *chip, u_char *buf, - int len) +static void omap_nand_data_in_irq_pref(struct nand_chip *chip, void *buf, + unsigned int len, bool force_8bit) { - struct mtd_info *mtd = nand_to_mtd(chip); - struct omap_nand_info *info = mtd_to_omap(mtd); + struct omap_nand_info *info = mtd_to_omap(nand_to_mtd(chip)); + struct mtd_info *mtd = nand_to_mtd(&info->nand); int ret = 0; - if (len <= mtd->oobsize) { - omap_read_buf_pref(chip, buf, len); + if (len <= mtd->oobsize || force_8bit) { + omap_nand_data_in(chip, buf, len, force_8bit); return; } @@ -637,9 +538,11 @@ static void omap_read_buf_irq_pref(struct nand_chip *chip, u_char *buf, /* configure and start prefetch transfer */ ret = omap_prefetch_enable(info->gpmc_cs, PREFETCH_FIFOTHRESHOLD_MAX/2, 0x0, len, 0x0, info); - if (ret) + if (ret) { /* PFPW engine is busy, use cpu copy method */ - goto out_copy; + omap_nand_data_in(chip, buf, len, false); + return; + } info->buf_len = len; @@ -652,31 +555,23 @@ static void omap_read_buf_irq_pref(struct nand_chip *chip, u_char *buf, /* disable and stop the PFPW engine */ omap_prefetch_reset(info->gpmc_cs, info); return; - -out_copy: - if (info->nand.options & NAND_BUSWIDTH_16) - omap_read_buf16(mtd, buf, len); - else - omap_read_buf8(mtd, buf, len); } /* - * omap_write_buf_irq_pref - write buffer to NAND controller - * @chip: NAND chip object - * @buf: data buffer - * @len: number of bytes to write + * omap_nand_data_out_irq_pref - NAND out using write posting and IRQ */ -static void omap_write_buf_irq_pref(struct nand_chip *chip, const u_char *buf, - int len) +static void omap_nand_data_out_irq_pref(struct nand_chip *chip, + const void *buf, unsigned int len, + bool force_8bit) { - struct mtd_info *mtd = nand_to_mtd(chip); - struct omap_nand_info *info = mtd_to_omap(mtd); + struct omap_nand_info *info = mtd_to_omap(nand_to_mtd(chip)); + struct mtd_info *mtd = nand_to_mtd(&info->nand); int ret = 0; unsigned long tim, limit; u32 val; - if (len <= mtd->oobsize) { - omap_write_buf_pref(chip, buf, len); + if (len <= mtd->oobsize || force_8bit) { + omap_nand_data_out(chip, buf, len, force_8bit); return; } @@ -687,9 +582,11 @@ static void omap_write_buf_irq_pref(struct nand_chip *chip, const u_char *buf, /* configure and start prefetch transfer : size=24 */ ret = omap_prefetch_enable(info->gpmc_cs, (PREFETCH_FIFOTHRESHOLD_MAX * 3) / 8, 0x0, len, 0x1, info); - if (ret) + if (ret) { /* PFPW engine is busy, use cpu copy method */ - goto out_copy; + omap_nand_data_out(chip, buf, len, false); + return; + } info->buf_len = len; @@ -711,12 +608,6 @@ static void omap_write_buf_irq_pref(struct nand_chip *chip, const u_char *buf, /* disable and stop the PFPW engine */ omap_prefetch_reset(info->gpmc_cs, info); return; - -out_copy: - if (info->nand.options & NAND_BUSWIDTH_16) - omap_write_buf16(mtd, buf, len); - else - omap_write_buf8(mtd, buf, len); } /** @@ -981,50 +872,6 @@ static void omap_enable_hwecc(struct nand_chip *chip, int mode) writel(val, info->reg.gpmc_ecc_config); } -/** - * omap_wait - wait until the command is done - * @this: NAND Chip structure - * - * Wait function is called during Program and erase operations and - * the way it is called from MTD layer, we should wait till the NAND - * chip is ready after the programming/erase operation has completed. - * - * Erase can take up to 400ms and program up to 20ms according to - * general NAND and SmartMedia specs - */ -static int omap_wait(struct nand_chip *this) -{ - struct omap_nand_info *info = mtd_to_omap(nand_to_mtd(this)); - unsigned long timeo = jiffies; - int status; - - timeo += msecs_to_jiffies(400); - - writeb(NAND_CMD_STATUS & 0xFF, info->reg.gpmc_nand_command); - while (time_before(jiffies, timeo)) { - status = readb(info->reg.gpmc_nand_data); - if (status & NAND_STATUS_READY) - break; - cond_resched(); - } - - status = readb(info->reg.gpmc_nand_data); - return status; -} - -/** - * omap_dev_ready - checks the NAND Ready GPIO line - * @chip: NAND chip object - * - * Returns true if ready and false if busy. - */ -static int omap_dev_ready(struct nand_chip *chip) -{ - struct omap_nand_info *info = mtd_to_omap(nand_to_mtd(chip)); - - return gpiod_get_value(info->ready_gpiod); -} - /** * omap_enable_hwecc_bch - Program GPMC to perform BCH ECC calculation * @chip: NAND chip object @@ -1543,8 +1390,8 @@ static int omap_write_page_bch(struct nand_chip *chip, const uint8_t *buf, chip->ecc.hwctl(chip, NAND_ECC_WRITE); /* Write data */ - chip->legacy.write_buf(chip, buf + (eccpg * info->eccpg_size), - info->eccpg_size); + info->data_out(chip, buf + (eccpg * info->eccpg_size), + info->eccpg_size, false); /* Update ecc vector from GPMC result registers */ ret = omap_calculate_ecc_bch_multi(mtd, @@ -1562,7 +1409,7 @@ static int omap_write_page_bch(struct nand_chip *chip, const uint8_t *buf, } /* Write ecc vector to OOB area */ - chip->legacy.write_buf(chip, chip->oob_poi, mtd->oobsize); + info->data_out(chip, chip->oob_poi, mtd->oobsize, false); return nand_prog_page_end_op(chip); } @@ -1607,8 +1454,8 @@ static int omap_write_subpage_bch(struct nand_chip *chip, u32 offset, chip->ecc.hwctl(chip, NAND_ECC_WRITE); /* Write data */ - chip->legacy.write_buf(chip, buf + (eccpg * info->eccpg_size), - info->eccpg_size); + info->data_out(chip, buf + (eccpg * info->eccpg_size), + info->eccpg_size, false); for (step = 0; step < info->nsteps_per_eccpg; step++) { unsigned int base_step = eccpg * info->nsteps_per_eccpg; @@ -1641,7 +1488,7 @@ static int omap_write_subpage_bch(struct nand_chip *chip, u32 offset, } /* write OOB buffer to NAND device */ - chip->legacy.write_buf(chip, chip->oob_poi, mtd->oobsize); + info->data_out(chip, chip->oob_poi, mtd->oobsize, false); return nand_prog_page_end_op(chip); } @@ -1984,8 +1831,8 @@ static int omap_nand_attach_chip(struct nand_chip *chip) /* Re-populate low-level callbacks based on xfer modes */ switch (info->xfer_type) { case NAND_OMAP_PREFETCH_POLLED: - chip->legacy.read_buf = omap_read_buf_pref; - chip->legacy.write_buf = omap_write_buf_pref; + info->data_in = omap_nand_data_in_pref; + info->data_out = omap_nand_data_out_pref; break; case NAND_OMAP_POLLED: @@ -2017,8 +1864,9 @@ static int omap_nand_attach_chip(struct nand_chip *chip) err); return err; } - chip->legacy.read_buf = omap_read_buf_dma_pref; - chip->legacy.write_buf = omap_write_buf_dma_pref; + + info->data_in = omap_nand_data_in_dma_pref; + info->data_out = omap_nand_data_out_dma_pref; } break; @@ -2049,9 +1897,8 @@ static int omap_nand_attach_chip(struct nand_chip *chip) return err; } - chip->legacy.read_buf = omap_read_buf_irq_pref; - chip->legacy.write_buf = omap_write_buf_irq_pref; - + info->data_in = omap_nand_data_in_irq_pref; + info->data_out = omap_nand_data_out_irq_pref; break; default: @@ -2217,8 +2064,105 @@ static int omap_nand_attach_chip(struct nand_chip *chip) return 0; } +static void omap_nand_data_in(struct nand_chip *chip, void *buf, + unsigned int len, bool force_8bit) +{ + struct omap_nand_info *info = mtd_to_omap(nand_to_mtd(chip)); + u32 alignment = ((uintptr_t)buf | len) & 3; + + if (force_8bit || (alignment & 1)) + ioread8_rep(info->fifo, buf, len); + else if (alignment & 3) + ioread16_rep(info->fifo, buf, len >> 1); + else + ioread32_rep(info->fifo, buf, len >> 2); +} + +static void omap_nand_data_out(struct nand_chip *chip, + const void *buf, unsigned int len, + bool force_8bit) +{ + struct omap_nand_info *info = mtd_to_omap(nand_to_mtd(chip)); + u32 alignment = ((uintptr_t)buf | len) & 3; + + if (force_8bit || (alignment & 1)) + iowrite8_rep(info->fifo, buf, len); + else if (alignment & 3) + iowrite16_rep(info->fifo, buf, len >> 1); + else + iowrite32_rep(info->fifo, buf, len >> 2); +} + +static int omap_nand_exec_instr(struct nand_chip *chip, + const struct nand_op_instr *instr) +{ + struct omap_nand_info *info = mtd_to_omap(nand_to_mtd(chip)); + unsigned int i; + int ret; + + switch (instr->type) { + case NAND_OP_CMD_INSTR: + iowrite8(instr->ctx.cmd.opcode, + info->reg.gpmc_nand_command); + break; + + case NAND_OP_ADDR_INSTR: + for (i = 0; i < instr->ctx.addr.naddrs; i++) { + iowrite8(instr->ctx.addr.addrs[i], + info->reg.gpmc_nand_address); + } + break; + + case NAND_OP_DATA_IN_INSTR: + info->data_in(chip, instr->ctx.data.buf.in, + instr->ctx.data.len, + instr->ctx.data.force_8bit); + break; + + case NAND_OP_DATA_OUT_INSTR: + info->data_out(chip, instr->ctx.data.buf.out, + instr->ctx.data.len, + instr->ctx.data.force_8bit); + break; + + case NAND_OP_WAITRDY_INSTR: + ret = info->ready_gpiod ? + nand_gpio_waitrdy(chip, info->ready_gpiod, instr->ctx.waitrdy.timeout_ms) : + nand_soft_waitrdy(chip, instr->ctx.waitrdy.timeout_ms); + if (ret) + return ret; + break; + } + + if (instr->delay_ns) + ndelay(instr->delay_ns); + + return 0; +} + +static int omap_nand_exec_op(struct nand_chip *chip, + const struct nand_operation *op, + bool check_only) +{ + unsigned int i; + + if (check_only) + return 0; + + for (i = 0; i < op->ninstrs; i++) { + int ret; + + ret = omap_nand_exec_instr(chip, &op->instrs[i]); + if (ret) + return ret; + } + + return 0; +} + static const struct nand_controller_ops omap_nand_controller_ops = { .attach_chip = omap_nand_attach_chip, + .exec_op = omap_nand_exec_op, }; /* Shared among all NAND instances to synchronize access to the ECC Engine */ @@ -2233,6 +2177,7 @@ static int omap_nand_probe(struct platform_device *pdev) int err; struct resource *res; struct device *dev = &pdev->dev; + void __iomem *vaddr; info = devm_kzalloc(&pdev->dev, sizeof(struct omap_nand_info), GFP_KERNEL); @@ -2266,10 +2211,11 @@ static int omap_nand_probe(struct platform_device *pdev) } res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - nand_chip->legacy.IO_ADDR_R = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(nand_chip->legacy.IO_ADDR_R)) - return PTR_ERR(nand_chip->legacy.IO_ADDR_R); + vaddr = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(vaddr)) + return PTR_ERR(vaddr); + info->fifo = vaddr; info->phys_base = res->start; if (!omap_gpmc_controller_initialized) { @@ -2280,9 +2226,6 @@ static int omap_nand_probe(struct platform_device *pdev) nand_chip->controller = &omap_gpmc_controller; - nand_chip->legacy.IO_ADDR_W = nand_chip->legacy.IO_ADDR_R; - nand_chip->legacy.cmd_ctrl = omap_hwcontrol; - info->ready_gpiod = devm_gpiod_get_optional(&pdev->dev, "rb", GPIOD_IN); if (IS_ERR(info->ready_gpiod)) { @@ -2290,27 +2233,16 @@ static int omap_nand_probe(struct platform_device *pdev) return PTR_ERR(info->ready_gpiod); } - /* - * If RDY/BSY line is connected to OMAP then use the omap ready - * function and the generic nand_wait function which reads the status - * register after monitoring the RDY/BSY line. Otherwise use a standard - * chip delay which is slightly more than tR (AC Timing) of the NAND - * device and read status register until you get a failure or success - */ - if (info->ready_gpiod) { - nand_chip->legacy.dev_ready = omap_dev_ready; - nand_chip->legacy.chip_delay = 0; - } else { - nand_chip->legacy.waitfunc = omap_wait; - nand_chip->legacy.chip_delay = 50; - } - if (info->flash_bbt) nand_chip->bbt_options |= NAND_BBT_USE_FLASH; /* scan NAND device connected to chip controller */ nand_chip->options |= info->devsize & NAND_BUSWIDTH_16; + /* default operations */ + info->data_in = omap_nand_data_in; + info->data_out = omap_nand_data_out; + err = nand_scan(nand_chip, 1); if (err) goto return_error; -- 2.25.1