From a1d203d390e04798ccc1c3c06019cd4411885d6d Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Thu, 19 Jun 2025 13:28:48 +0300 Subject: [PATCH] ASoC: SOF: ipc4-pcm: Enable delay reporting for ChainDMA streams All streams (currently) which is configured to use ChainDMA can only work on Link/host DMA pairs where the link side position can be access via host registers (like HDA on CAVS 2.5 platforms). Since the firmware does not provide time_info for ChainDMA, unlike for HDA stream, the kernel should calculate the start and end offsets that is needed for the delay calculation. With this small change we can report accurate delays when the stream is configured to use ChainDMA. Signed-off-by: Peter Ujfalusi Reviewed-by: Bard Liao Reviewed-by: Liam Girdwood Reviewed-by: Ranjani Sridharan Link: https://patch.msgid.link/20250619102848.12389-1-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown --- sound/soc/sof/ipc4-pcm.c | 49 ++++++++++++++++++++++++++++++++--- sound/soc/sof/ipc4-topology.c | 6 ++--- sound/soc/sof/ipc4-topology.h | 1 + 3 files changed, 49 insertions(+), 7 deletions(-) diff --git a/sound/soc/sof/ipc4-pcm.c b/sound/soc/sof/ipc4-pcm.c index a5b365ab1945..6e19d89e2963 100644 --- a/sound/soc/sof/ipc4-pcm.c +++ b/sound/soc/sof/ipc4-pcm.c @@ -409,9 +409,33 @@ static int sof_ipc4_trigger_pipelines(struct snd_soc_component *component, * If use_chain_dma attribute is set we proceed to chained DMA * trigger function that handles the rest for the substream. */ - if (pipeline->use_chain_dma) - return sof_ipc4_chain_dma_trigger(sdev, spcm, substream->stream, - pipeline_list, state, cmd); + if (pipeline->use_chain_dma) { + struct sof_ipc4_timestamp_info *time_info; + + time_info = sof_ipc4_sps_to_time_info(&spcm->stream[substream->stream]); + + ret = sof_ipc4_chain_dma_trigger(sdev, spcm, substream->stream, + pipeline_list, state, cmd); + if (ret || !time_info) + return ret; + + if (state == SOF_IPC4_PIPE_PAUSED) { + /* + * Record the DAI position for delay reporting + * To handle multiple pause/resume/xrun we need to add + * the positions to simulate how the firmware behaves + */ + u64 pos = snd_sof_pcm_get_dai_frame_counter(sdev, component, + substream); + + time_info->stream_end_offset += pos; + } else if (state == SOF_IPC4_PIPE_RESET) { + /* Reset the end offset as the stream is stopped */ + time_info->stream_end_offset = 0; + } + + return 0; + } /* allocate memory for the pipeline data */ trigger_list = kzalloc(struct_size(trigger_list, pipeline_instance_ids, @@ -959,8 +983,24 @@ static int sof_ipc4_get_stream_start_offset(struct snd_sof_dev *sdev, if (!host_copier || !dai_copier) return -EINVAL; - if (host_copier->data.gtw_cfg.node_id == SOF_IPC4_INVALID_NODE_ID) + if (host_copier->data.gtw_cfg.node_id == SOF_IPC4_INVALID_NODE_ID) { return -EINVAL; + } else if (host_copier->data.gtw_cfg.node_id == SOF_IPC4_CHAIN_DMA_NODE_ID) { + /* + * While the firmware does not supports time_info reporting for + * streams using ChainDMA, it is granted that ChainDMA can only + * be used on Host+Link pairs where the link position is + * accessible from the host side. + * + * Enable delay calculation in case of ChainDMA via host + * accessible registers. + * + * The ChainDMA uses 2x 1ms ping-pong buffer, dai side starts + * when 1ms data is available + */ + time_info->stream_start_offset = substream->runtime->rate / MSEC_PER_SEC; + goto out; + } node_index = SOF_IPC4_NODE_INDEX(host_copier->data.gtw_cfg.node_id); offset = offsetof(struct sof_ipc4_fw_registers, pipeline_regs) + node_index * sizeof(ppl_reg); @@ -978,6 +1018,7 @@ static int sof_ipc4_get_stream_start_offset(struct snd_sof_dev *sdev, time_info->stream_end_offset = ppl_reg.stream_end_offset; do_div(time_info->stream_end_offset, dai_sample_size); +out: /* * Calculate the wrap boundary need to be used for delay calculation * The host counter is in bytes, it will wrap earlier than the frames diff --git a/sound/soc/sof/ipc4-topology.c b/sound/soc/sof/ipc4-topology.c index 089f2c9fe693..591ee30551ba 100644 --- a/sound/soc/sof/ipc4-topology.c +++ b/sound/soc/sof/ipc4-topology.c @@ -1938,10 +1938,10 @@ sof_ipc4_prepare_copier_module(struct snd_sof_widget *swidget, pipeline->msg.extension |= SOF_IPC4_GLB_EXT_CHAIN_DMA_FIFO_SIZE(fifo_size); /* - * Chain DMA does not support stream timestamping, set node_id to invalid - * to skip the code in sof_ipc4_get_stream_start_offset(). + * Chain DMA does not support stream timestamping, but it + * can use the host side registers for delay calculation. */ - copier_data->gtw_cfg.node_id = SOF_IPC4_INVALID_NODE_ID; + copier_data->gtw_cfg.node_id = SOF_IPC4_CHAIN_DMA_NODE_ID; return 0; } diff --git a/sound/soc/sof/ipc4-topology.h b/sound/soc/sof/ipc4-topology.h index 9e98cac19532..14ba58d2be03 100644 --- a/sound/soc/sof/ipc4-topology.h +++ b/sound/soc/sof/ipc4-topology.h @@ -58,6 +58,7 @@ #define SOF_IPC4_DMA_DEVICE_MAX_COUNT 16 +#define SOF_IPC4_CHAIN_DMA_NODE_ID 0x7fffffff #define SOF_IPC4_INVALID_NODE_ID 0xffffffff /* FW requires minimum 2ms DMA buffer size */ -- 2.25.1