From 8883ad80c175dd17aaf007f982e3f8461315eab8 Mon Sep 17 00:00:00 2001 From: "Ivan T. Ivanov" Date: Thu, 4 Jun 2015 12:19:05 +0300 Subject: [PATCH] arm64: dts: qcom: Fix apq8016-sbc board USB related pin definitions USB2513B HUB reset line is connected to PMIC GPIO3 not GPIO1. Fix TC7USB40MU Dual SPDT Switch select input line control, which is connected to PMIC GPIO4 not GPIO2 and disable the pin. It is not used for now. Remove user LEDs definitions, because they clash with above numbers. Signed-off-by: Ivan T. Ivanov Signed-off-by: Andy Gross --- .../boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi | 22 +++++++------------ 1 file changed, 8 insertions(+), 14 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi index 37ca2ed55351..b568c49b2111 100644 --- a/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi @@ -2,26 +2,20 @@ &pm8916_gpios { - pm8916_gpios_default: default { - usb_hub_reset_pm { - pins = "gpio1"; - function = PMIC_GPIO_FUNC_NORMAL; - output-low; - }; - usb_sw_sel_pm { - pins = "gpio2"; - function = PMIC_GPIO_FUNC_NORMAL; - input-disable; - }; - usr_led_3_ctrl { + usb_hub_reset_pm: usb_hub_reset_pm { + pinconf { pins = "gpio3"; function = PMIC_GPIO_FUNC_NORMAL; output-low; }; - usr_led_4_ctrl { + }; + + usb_sw_sel_pm: usb_sw_sel_pm { + pinconf { pins = "gpio4"; function = PMIC_GPIO_FUNC_NORMAL; - output-low; + power-source = ; + input-disable; }; }; }; -- 2.25.1