From 865ab2461375e3a5a2526f91f9a9f17b8931bc9e Mon Sep 17 00:00:00 2001 From: Subbaraya Sundeep Date: Mon, 12 May 2025 18:12:36 +0530 Subject: [PATCH] octeontx2-pf: macsec: Fix incorrect max transmit size in TX secy MASCEC hardware block has a field called maximum transmit size for TX secy. Max packet size going out of MCS block has be programmed taking into account full packet size which has L2 header,SecTag and ICV. MACSEC offload driver is configuring max transmit size as macsec interface MTU which is incorrect. Say with 1500 MTU of real device, macsec interface created on top of real device will have MTU of 1468(1500 - (SecTag + ICV)). This is causing packets from macsec interface of size greater than or equal to 1468 are not getting transmitted out because driver programmed max transmit size as 1468 instead of 1514(1500 + ETH_HDR_LEN). Fixes: c54ffc73601c ("octeontx2-pf: mcs: Introduce MACSEC hardware offloading") Signed-off-by: Subbaraya Sundeep Reviewed-by: Simon Horman Link: https://patch.msgid.link/1747053756-4529-1-git-send-email-sbhatta@marvell.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/marvell/octeontx2/nic/cn10k_macsec.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/cn10k_macsec.c b/drivers/net/ethernet/marvell/octeontx2/nic/cn10k_macsec.c index f3b9daffaec3..4c7e0f345cb5 100644 --- a/drivers/net/ethernet/marvell/octeontx2/nic/cn10k_macsec.c +++ b/drivers/net/ethernet/marvell/octeontx2/nic/cn10k_macsec.c @@ -531,7 +531,8 @@ static int cn10k_mcs_write_tx_secy(struct otx2_nic *pfvf, if (sw_tx_sc->encrypt) sectag_tci |= (MCS_TCI_E | MCS_TCI_C); - policy = FIELD_PREP(MCS_TX_SECY_PLCY_MTU, secy->netdev->mtu); + policy = FIELD_PREP(MCS_TX_SECY_PLCY_MTU, + pfvf->netdev->mtu + OTX2_ETH_HLEN); /* Write SecTag excluding AN bits(1..0) */ policy |= FIELD_PREP(MCS_TX_SECY_PLCY_ST_TCI, sectag_tci >> 2); policy |= FIELD_PREP(MCS_TX_SECY_PLCY_ST_OFFSET, tag_offset); -- 2.25.1