From 7155c44624d061692b4c13aa8343f119c67d4fc0 Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Sun, 26 Jan 2020 21:49:50 +0200 Subject: [PATCH] ARM: dts: ls1021a: Restore MDIO compatible to gianfar The difference between "fsl,etsec2-mdio" and "gianfar" has to do with the .get_tbipa function, which calculates the address of the TBIPA register automatically, if not explicitly specified. [ see drivers/net/ethernet/freescale/fsl_pq_mdio.c ]. On LS1021A, the TBIPA register is at offset 0x30 within the port register block, which is what the "gianfar" method of calculating addresses actually does. Luckily, the bad "compatible" is inconsequential for ls1021a.dtsi, because the TBIPA register is explicitly specified via the second "reg" (<0x0 0x2d10030 0x0 0x4>), so the "get_tbipa" function is dead code. Nonetheless it's good to restore it to its correct value. Background discussion: https://www.spinics.net/lists/stable/msg361156.html Fixes: c7861adbe37f ("ARM: dts: ls1021: Fix SGMII PCS link remaining down after PHY disconnect") Reported-by: Pavel Machek Signed-off-by: Vladimir Oltean Signed-off-by: Shawn Guo --- arch/arm/boot/dts/ls1021a.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi index 0855b1fe98e0..760a68c163c8 100644 --- a/arch/arm/boot/dts/ls1021a.dtsi +++ b/arch/arm/boot/dts/ls1021a.dtsi @@ -747,7 +747,7 @@ }; mdio0: mdio@2d24000 { - compatible = "fsl,etsec2-mdio"; + compatible = "gianfar"; device_type = "mdio"; #address-cells = <1>; #size-cells = <0>; @@ -756,7 +756,7 @@ }; mdio1: mdio@2d64000 { - compatible = "fsl,etsec2-mdio"; + compatible = "gianfar"; device_type = "mdio"; #address-cells = <1>; #size-cells = <0>; -- 2.25.1