From 68c31ad01105f5cb15f5c863e90fe97a770c951f Mon Sep 17 00:00:00 2001 From: Mikko Perttunen Date: Tue, 20 Sep 2022 11:11:59 +0300 Subject: [PATCH] arm64: tegra: Add NVDEC on Tegra234 Add a device tree node for NVDEC on Tegra234. Booting the firmware requires some information regarding offsets within the firmware binary. These are passed through the device tree, but since the values vary depending on the firmware version, and the firmware itself is not available to the OS, the flasher is expected to provide a device tree overlay with values corresponding to the firmware it is flashing. The overlay then replaces the placeholder values here. Signed-off-by: Mikko Perttunen Signed-off-by: Thierry Reding --- arch/arm64/boot/dts/nvidia/tegra234.dtsi | 36 ++++++++++++++++++++++++ 1 file changed, 36 insertions(+) diff --git a/arch/arm64/boot/dts/nvidia/tegra234.dtsi b/arch/arm64/boot/dts/nvidia/tegra234.dtsi index dcd0224a2a36..35ce8cfb8c08 100644 --- a/arch/arm64/boot/dts/nvidia/tegra234.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra234.dtsi @@ -603,6 +603,42 @@ iommus = <&smmu_niso1 TEGRA234_SID_VIC>; dma-coherent; }; + + nvdec@15480000 { + compatible = "nvidia,tegra234-nvdec"; + reg = <0x15480000 0x00040000>; + clocks = <&bpmp TEGRA234_CLK_NVDEC>, + <&bpmp TEGRA234_CLK_FUSE>, + <&bpmp TEGRA234_CLK_TSEC_PKA>; + clock-names = "nvdec", "fuse", "tsec_pka"; + resets = <&bpmp TEGRA234_RESET_NVDEC>; + reset-names = "nvdec"; + power-domains = <&bpmp TEGRA234_POWER_DOMAIN_NVDEC>; + interconnects = <&mc TEGRA234_MEMORY_CLIENT_NVDECSRD &emc>, + <&mc TEGRA234_MEMORY_CLIENT_NVDECSWR &emc>; + interconnect-names = "dma-mem", "write"; + iommus = <&smmu_niso1 TEGRA234_SID_NVDEC>; + dma-coherent; + + nvidia,memory-controller = <&mc>; + + /* + * Placeholder values that firmware needs to update with the real + * offsets parsed from the microcode headers. + */ + nvidia,bl-manifest-offset = <0>; + nvidia,bl-data-offset = <0>; + nvidia,bl-code-offset = <0>; + nvidia,os-manifest-offset = <0>; + nvidia,os-data-offset = <0>; + nvidia,os-code-offset = <0>; + + /* + * Firmware needs to set this to "okay" once the above values have + * been updated. + */ + status = "disabled"; + }; }; gpio: gpio@2200000 { -- 2.25.1