From 26907eb605fbc3ba9dbf888f21d9d8d04471271d Mon Sep 17 00:00:00 2001 From: Evgeniy Didin Date: Tue, 7 Jul 2020 18:38:58 +0300 Subject: [PATCH] ARC: [plat-hsdk]: Switch ethernet phy-mode to rgmii-id HSDK board has Micrel KSZ9031, recent commit bcf3440c6dd ("net: phy: micrel: add phy-mode support for the KSZ9031 PHY") caused a breakdown of Ethernet. Using 'phy-mode = "rgmii"' is not correct because accodring RGMII specification it is necessary to have delay on RX (PHY to MAX) which is not generated in case of "rgmii". Using "rgmii-id" adds necessary delay and solves the issue. Also adding name of PHY placed on HSDK board. Signed-off-by: Evgeniy Didin Cc: Eugeniy Paltsev Cc: Alexey Brodkin Signed-off-by: Vineet Gupta --- arch/arc/boot/dts/hsdk.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arc/boot/dts/hsdk.dts b/arch/arc/boot/dts/hsdk.dts index 5d64a5a940ee..dcaa44e408ac 100644 --- a/arch/arc/boot/dts/hsdk.dts +++ b/arch/arc/boot/dts/hsdk.dts @@ -210,7 +210,7 @@ reg = <0x8000 0x2000>; interrupts = <10>; interrupt-names = "macirq"; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; snps,pbl = <32>; snps,multicast-filter-bins = <256>; clocks = <&gmacclk>; @@ -228,7 +228,7 @@ #address-cells = <1>; #size-cells = <0>; compatible = "snps,dwmac-mdio"; - phy0: ethernet-phy@0 { + phy0: ethernet-phy@0 { /* Micrel KSZ9031 */ reg = <0>; }; }; -- 2.25.1