From 1095ad0e92175d19cb7f0b5256af300c921a2d63 Mon Sep 17 00:00:00 2001 From: Neil Armstrong Date: Thu, 6 Jun 2024 10:48:08 +0200 Subject: [PATCH] arm64: dts: amlogic: meson-g12b-bananapi: remove invalid fan on wrong pwm_cd controller The fan is connected to the GPIOAO_10 pin, which can be connected to the pwm_AO_cd controller, but this one is already used for the vddcpu_b regulator. The fan was wrongly described as using the pwm_cd with the invalid "pwm-gpios" property, both are wrong so remove the fan until we find an acceptable solution. This fixes the following error: pwm@1a000: 'pwm-gpios' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/pwm/pwm-amlogic.yaml# Tested-by: Christian Hewitt Link: https://lore.kernel.org/r/20240606-topic-amlogic-upstream-bindings-fixes-dts-v1-1-62e812729541@linaro.org Signed-off-by: Neil Armstrong --- .../boot/dts/amlogic/meson-g12b-bananapi.dtsi | 14 -------------- 1 file changed, 14 deletions(-) diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi index 4b8db872bbf3..6a346cb86a53 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi @@ -44,13 +44,6 @@ reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>; }; - fan0: pwm-fan { - compatible = "pwm-fan"; - #cooling-cells = <2>; - cooling-levels = <0 120 170 220>; - pwms = <&pwm_cd 1 40000 0>; - }; - hdmi-connector { compatible = "hdmi-connector"; type = "a"; @@ -374,13 +367,6 @@ clock-names = "clkin0"; }; -&pwm_cd { - status = "okay"; - pinctrl-0 = <&pwm_d_x6_pins>; - pinctrl-names = "default"; - pwm-gpios = <&gpio GPIOAO_10 GPIO_ACTIVE_HIGH>; -}; - &pwm_ef { status = "okay"; pinctrl-0 = <&pwm_e_pins>; -- 2.25.1