From 0e6d633274db7b4db14a1194163b4d31d37b261f Mon Sep 17 00:00:00 2001 From: Ulf Hansson Date: Mon, 8 Dec 2014 15:26:13 +0100 Subject: [PATCH] mmc: pwrseq: Document DT bindings for the simple MMC power sequence To support SOCs which specifies specific MMC power sequences, document some MMC DT bindings to be able to describe these hardwares. Let's also document bindings for a simple MMC power sequence provider, which purpose is to support a set of common properties between various SOCs. In this initial step, let's also document a top level description of the MMC power sequence and describe the compatible string used for the simple MMC power sequence provider. The simple MMC power sequence provider will initially support a reset GPIO. From several earlier posted patches, it's clear that such hardware exists. Especially some WLAN chips which are attached to an SDIO interface may use a GPIO reset. Signed-off-by: Ulf Hansson Tested-by: Javier Martinez Canillas Reviewed-by: Javier Martinez Canillas --- .../bindings/mmc/mmc-pwrseq-simple.txt | 20 +++++++++++++++++++ Documentation/devicetree/bindings/mmc/mmc.txt | 14 +++++++++++++ 2 files changed, 34 insertions(+) create mode 100644 Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.txt diff --git a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.txt b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.txt new file mode 100644 index 000000000000..da333d9ed94c --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.txt @@ -0,0 +1,20 @@ +* The simple MMC power sequence provider + +The purpose of the simple MMC power sequence provider is to supports a set of +common properties between various SOC designs. It thus enables us to use the +same provider for several SOC designs. + +Required properties: +- compatible : contains "mmc-pwrseq-simple". + +Optional properties: +- reset-gpios : contains a GPIO specifier. The reset GPIO is asserted at + initialization and prior we start the power up procedure of the card. It + will be de-asserted right after the power has been provided to the card. + +Example: + + sdhci0_pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio1 12 0>; + } diff --git a/Documentation/devicetree/bindings/mmc/mmc.txt b/Documentation/devicetree/bindings/mmc/mmc.txt index bac131169c07..438899e8829b 100644 --- a/Documentation/devicetree/bindings/mmc/mmc.txt +++ b/Documentation/devicetree/bindings/mmc/mmc.txt @@ -65,6 +65,18 @@ Optional SDIO properties: - enable-sdio-wakeup: Enables wake up of host system on SDIO IRQ assertion +MMC power sequences: +-------------------- + +System on chip designs may specify a specific MMC power sequence. To +successfully detect an (e)MMC/SD/SDIO card, that power sequence must be +maintained while initializing the card. + +Optional property: +- mmc-pwrseq: phandle to the MMC power sequence node. See "mmc-pwrseq-*" + for documentation of MMC power sequence bindings. + + Use of Function subnodes ------------------------ @@ -101,6 +113,7 @@ sdhci@ab000000 { max-frequency = <50000000>; keep-power-in-suspend; enable-sdio-wakeup; + mmc-pwrseq = <&sdhci0_pwrseq> } Example with sdio function subnode: @@ -114,6 +127,7 @@ mmc3: mmc@01c12000 { vmmc-supply = <®_vmmc3>; bus-width = <4>; non-removable; + mmc-pwrseq = <&sdhci0_pwrseq> status = "okay"; brcmf: bcrmf@1 { -- 2.25.1