From 00a9f71760376749e0857b43a8573803b1a075dc Mon Sep 17 00:00:00 2001 From: Amelie Delaunay Date: Tue, 5 Jan 2021 10:05:20 +0100 Subject: [PATCH] dt-bindings: phy: phy-stm32-usbphyc: move PLL supplies to parent node PLL block requires to be powered with 1v1 and 1v8 supplies to catch ENABLE signal. Currently, supplies are managed through phy_ops .power_on/off, and PLL activation/deactivation is managed through phy_ops .init/exit. The sequence of phy_ops .power_on/.phy_init, .power_off/.exit is USB drivers dependent. To ensure a good behavior of the PLL, supplies have to be managed at PLL activation/deactivation. That means the supplies need to be put in usbphyc parent node and not in phy children nodes. Signed-off-by: Amelie Delaunay Reviewed-by: Rob Herring Link: https://lore.kernel.org/r/20210105090525.23164-2-amelie.delaunay@foss.st.com Signed-off-by: Vinod Koul --- .../bindings/phy/phy-stm32-usbphyc.yaml | 22 +++++++++---------- 1 file changed, 10 insertions(+), 12 deletions(-) diff --git a/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml b/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml index 0ba61979b970..46df6786727a 100644 --- a/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml +++ b/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml @@ -45,6 +45,12 @@ properties: "#size-cells": const: 0 + vdda1v1-supply: + description: regulator providing 1V1 power supply to the PLL block + + vdda1v8-supply: + description: regulator providing 1V8 power supply to the PLL block + #Required child nodes: patternProperties: @@ -61,12 +67,6 @@ patternProperties: phy-supply: description: regulator providing 3V3 power supply to the PHY. - vdda1v1-supply: - description: regulator providing 1V1 power supply to the PLL block - - vdda1v8-supply: - description: regulator providing 1V8 power supply to the PLL block - "#phy-cells": enum: [ 0x0, 0x1 ] @@ -90,8 +90,6 @@ patternProperties: required: - reg - phy-supply - - vdda1v1-supply - - vdda1v8-supply - "#phy-cells" additionalProperties: false @@ -102,6 +100,8 @@ required: - clocks - "#address-cells" - "#size-cells" + - vdda1v1-supply + - vdda1v8-supply - usb-phy@0 - usb-phy@1 @@ -116,22 +116,20 @@ examples: reg = <0x5a006000 0x1000>; clocks = <&rcc USBPHY_K>; resets = <&rcc USBPHY_R>; + vdda1v1-supply = <®11>; + vdda1v8-supply = <®18>; #address-cells = <1>; #size-cells = <0>; usbphyc_port0: usb-phy@0 { reg = <0>; phy-supply = <&vdd_usb>; - vdda1v1-supply = <®11>; - vdda1v8-supply = <®18>; #phy-cells = <0>; }; usbphyc_port1: usb-phy@1 { reg = <1>; phy-supply = <&vdd_usb>; - vdda1v1-supply = <®11>; - vdda1v8-supply = <®18>; #phy-cells = <1>; }; }; -- 2.25.1