iio: accel: adxl372: use = { } instead of memset()

Use { } instead of memset() to zero-initialize stack memory to simplify
the code.

Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250611-iio-zero-init-stack-with-instead-of-memset-v1-1-ebb2d0a24302@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: accel: adxl345: replace magic numbers by unit expressions

Replace absolute numbers by their expressions from units.h to avoid
using magic numbers. Use uniform expressions to clarify their usage.

This is a refactoring change and should not impact functionality.

Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
Link: https://patch.msgid.link/20250610215933.84795-7-l.rubusch@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: accel: adxl345: simplify measure enable

Simplify the function to enable or disable measurement. Replace the
separate decision logic and call to regmap_update_bits() by a single
call to regmap_assign_bits() taking a boolean argument directly.

This is a refactoring change and should not impact functionality.

Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
Link: https://patch.msgid.link/20250610215933.84795-4-l.rubusch@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: accel: adxl345: make data struct variable irq function local

Remove variable irq from the struct state and make it a function local
variable, because it is not necessary to be kept struct-wise.

This is a refactoring change and should not impact functionality.

Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
Link: https://patch.msgid.link/20250610215933.84795-3-l.rubusch@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: amplifiers: ada4250: use dev_err_probe()

Use dev_err_probe() when returning an error in the probe function.

Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250611-iio-amplifiers-ada4250-simplify-data-buffer-in-init-v3-5-bf85ddea79f2@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: amplifiers: ada4250: move offset_uv in struct

Move offset_uv in struct ada4250_state. This keeps things logically
grouped and reduces holes in the struct.

Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250611-iio-amplifiers-ada4250-simplify-data-buffer-in-init-v3-4-bf85ddea79f2@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: amplifiers: ada4250: use devm_regulator_get_enable_read_voltage()

Use devm_regulator_get_enable_read_voltage() to simplify the code.

Replace 1000000 with MICRO while we are touching this for better
readability.

Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250611-iio-amplifiers-ada4250-simplify-data-buffer-in-init-v3-3-bf85ddea79f2@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: amplifiers: ada4250: don't fail on bad chip ID

Only print an information message instead of error message and failing
to probe the device if the chip ID is not recognized. Experience shows
that this can be fragile and some devices may not return the expected
chip ID even though the driver is still able to work with them.

Suggested-by: Jonathan Cameron <jic23@kernel.org>
Closes: https://lore.kernel.org/linux-iio/20250421122409.79f5580c@jic23-huawei/
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250611-iio-amplifiers-ada4250-simplify-data-buffer-in-init-v3-2-bf85ddea79f2@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: amplifiers: ada4250: used dev local variable

Replace local spi variable with dev in ada4250_init() since spi is not
used directly.

Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250611-iio-amplifiers-ada4250-simplify-data-buffer-in-init-v3-1-bf85ddea79f2@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: accel: sca3000: replace error_ret labels by simple returns

Replace usage of error_ret labels by returning directly when handling
errors. Cases that do a mutex unlock were not changed.

Signed-off-by: Andrew Ijano <andrew.lopes@alumni.usp.br>
Co-developed-by: Gustavo Bastos <gustavobastos@usp.br>
Signed-off-by: Gustavo Bastos <gustavobastos@usp.br>
Suggested-by: Jonathan Cameron <jic23@kernel.org>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250611194648.18133-2-andrew.lopes@alumni.usp.br
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: light: apds9306: Refactor threshold get/set functions to use helper

Refactor the apds9306_event_thresh_get() and apds9306_event_thresh_set()
functions to use a helper function (apds9306_get_thresh_reg()) for
obtaining the correct register based on the direction of the event. This
improves code readability and maintains consistency in accessing
threshold registers.

Signed-off-by: Nattan Ferreira <nattanferreira58@gmail.com>
Co-developed-by: Lucas Antonio <lucasantonio.santos@usp.br>
Signed-off-by: Lucas Antonio <lucasantonio.santos@usp.br>
Acked-by: Subhajit Ghosh <subhajit.ghosh@tweaklogic.com>
Link: https://patch.msgid.link/20250611174253.16578-1-nattanferreira58@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: ad7768-1: add filter type and oversampling ratio attributes

Separate filter type and decimation rate from the sampling frequency
attribute. The new filter type attribute enables sinc3, sinc3+rej60
and wideband filters, which were previously unavailable.

Previously, combining decimation and MCLK divider in the sampling
frequency obscured performance trade-offs. Lower MCLK divider
settings increase power usage, while lower decimation rates reduce
precision by decreasing averaging. By creating an oversampling
attribute, which controls the decimation, users gain finer control
over performance.

The addition of those attributes allows a wider range of sampling
frequencies and more access to the device features. Sampling frequency
table is updated after every digital filter parameter change.

Changes in the sampling frequency are not allowed anymore while in
buffered mode.

Reviewed-by: David Lechner <dlechner@baylibre.com>
Co-developed-by: Pop Paul <paul.pop@analog.com>
Signed-off-by: Pop Paul <paul.pop@analog.com>
Signed-off-by: Jonathan Santos <Jonathan.Santos@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/cd3b60c44847d5c35cecc4385bbda6533be6825e.1749569957.git.Jonathan.Santos@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: ad7768-1: replace manual attribute declaration

Use read_avail callback from struct iio_info to replace the manual
declaration of sampling_frequency_available attribute.

Reviewed-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Signed-off-by: Jonathan Santos <Jonathan.Santos@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/b2653d270131b2c873373a6f81cde9a5bdf5d1ff.1749569957.git.Jonathan.Santos@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: ad7768-1: add support for Synchronization over SPI

The synchronization method using GPIO requires the generated pulse to be
truly synchronous with the base MCLK signal. When it is not possible to
do that in hardware, the datasheet recommends using synchronization over
SPI, where the generated pulse is already synchronous with MCLK. This
requires the SYNC_OUT pin to be connected to the SYNC_IN pin.

Use trigger-sources property to enable device synchronization over SPI
and multi-device synchronization while replacing sync-in-gpios property.

Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Jonathan Santos <Jonathan.Santos@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/05aea6d1551fce94f290d68f1dba548513e1632f.1749569957.git.Jonathan.Santos@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: ad7768-1: add multiple scan types to support 16-bits mode

When the device is configured to decimation x8, only possible in the
sinc5 filter, output data is reduced to 16 bits in order to support
1 MHz of sampling frequency due to clock limitation.

Use multiple scan types feature to enable the driver to switch
scan type at runtime, making it possible to support both 24-bit and
16-bit resolution.

Reviewed-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Jonathan Santos <Jonathan.Santos@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/08780fd4a59885f1f250759ce655420bd1dbb383.1749569957.git.Jonathan.Santos@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: ad7768-1: Add GPIO controller support

The AD7768-1 has the ability to control other local hardware (such as gain
stages),to power down other blocks in the signal chain, or read local
status signals over the SPI interface.

Add direct mode conditional locks in the GPIO callbacks to prevent register
access when the device is in buffered mode.

This change exports the AD7768-1's four GPIOs and makes them accessible
at an upper layer.

Reviewed-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sergiu Cuciurean <sergiu.cuciurean@analog.com>
Co-developed-by: Jonathan Santos <Jonathan.Santos@analog.com>
Signed-off-by: Jonathan Santos <Jonathan.Santos@analog.com>
Link: https://patch.msgid.link/8abca580f43cb31d7088d07a7414b5f7efe91ead.1749569957.git.Jonathan.Santos@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: ad7768-1: add regulator to control VCM output

The VCM output voltage can be used as a common-mode voltage within the
amplifier preconditioning circuits external to the AD7768-1.

This change allows the user to configure VCM output using the regulator
framework.

Acked-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jonathan Santos <Jonathan.Santos@analog.com>
Link: https://patch.msgid.link/1f02312fdc4131168b194d59f4b1688dc68ea36e.1749569957.git.Jonathan.Santos@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: iio: adc: ad7768-1: add trigger-sources property

In addition to GPIO synchronization, The AD7768-1 also supports
synchronization over SPI, which use is recommended when the GPIO
cannot provide a pulse synchronous with the base MCLK signal. It
consists of looping back the SYNC_OUT to the SYNC_IN pin and send
a command via SPI to trigger the synchronization.

Introduce the 'trigger-sources' property to enable SPI-based
synchronization via SYNC_OUT pin, along with additional optional
entries for GPIO3 and DRDY pins.

Also create #trigger-source-cells property to differentiate the trigger
sources provided by the ADC. To improve readability, create a
adi,ad7768-1.h header with the macros for the cell values.

While at it, add description to the interrupts property.

Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: David Lechner <dlechner@baylirbe.com>
Signed-off-by: Jonathan Santos <Jonathan.Santos@analog.com>
Link: https://patch.msgid.link/713fd786010c75858700efaec8bb285274e7057e.1749569957.git.Jonathan.Santos@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: iio: adc: ad7768-1: Document GPIO controller

The AD7768-1 ADC exports four bidirectional GPIOs accessible
via register map.

Document GPIO properties necessary to enable GPIO controller for this
device.

Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Jonathan Santos <Jonathan.Santos@analog.com>
Link: https://patch.msgid.link/2ac34fc1e0b02886073ae0bb196c7e8d4d442c3f.1749569957.git.Jonathan.Santos@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: iio: adc: ad7768-1: document regulator provider property

The AD7768-1 provides a buffered common-mode voltage output
on the VCM pin that can be used to bias analog input signals.

Add regulators property to enable the use of the VCM output,
referenced here as vcm-output, by any other device.

Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Jonathan Santos <Jonathan.Santos@analog.com>
Link: https://patch.msgid.link/33c02a1fb9d839f62da5237f9476ccbf14271b6d.1749569957.git.Jonathan.Santos@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: trigger-source: add generic GPIO trigger source

Inspired by pwm-trigger, create a new binding for using a GPIO
line as a trigger source.

Link: https://lore.kernel.org/linux-iio/20250207-dlech-mainline-spi-engine-offload-2-v8-3-e48a489be48c@baylibre.com/
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Jonathan Santos <Jonathan.Santos@analog.com>
Link: https://patch.msgid.link/c4a3a7c828c711b439d1893271b8376823176ea6.1749569957.git.Jonathan.Santos@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: stm32-adc: Use dev_fwnode()

irq_domain_create_simple() takes fwnode as the first argument. It can be
extracted from the struct device using dev_fwnode() helper instead of
using of_node with of_fwnode_handle().

So use the dev_fwnode() helper.

Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250612084627.217341-1-jirislaby@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: light: opt4060: convert to use maple tree register cache

The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache.

Signed-off-by: chuguangqing <chuguangqing@inspur.com>
Link: https://patch.msgid.link/20250611085838.4761-11-chuguangqing@inspur.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: light: ltr501: convert to use maple tree register cache

The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache.

Signed-off-by: chuguangqing <chuguangqing@inspur.com>
Link: https://patch.msgid.link/20250611085838.4761-10-chuguangqing@inspur.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: light: isl29028: convert to use maple tree register cache

The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache.

Signed-off-by: chuguangqing <chuguangqing@inspur.com>
Link: https://patch.msgid.link/20250611085838.4761-9-chuguangqing@inspur.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: imu: bno055: convert to use maple tree register cache

The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache.

Signed-off-by: chuguangqing <chuguangqing@inspur.com>
Link: https://patch.msgid.link/20250611085838.4761-8-chuguangqing@inspur.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: imu: icm42600: convert to use maple tree register cache

The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache.

Signed-off-by: chuguangqing <chuguangqing@inspur.com>
Acked-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Link: https://patch.msgid.link/20250611085838.4761-7-chuguangqing@inspur.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: health: afe4404: convert to use maple tree register cache

The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache.

Signed-off-by: chuguangqing <chuguangqing@inspur.com>
Link: https://patch.msgid.link/20250611085838.4761-6-chuguangqing@inspur.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: health: afe4403: convert to use maple tree register cache

The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache.

Signed-off-by: chuguangqing <chuguangqing@inspur.com>
Link: https://patch.msgid.link/20250611085838.4761-5-chuguangqing@inspur.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: dac: bd79703: convert to use maple tree register cache

The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache.

Signed-off-by: chuguangqing <chuguangqing@inspur.com>
Link: https://patch.msgid.link/20250611085838.4761-4-chuguangqing@inspur.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: dac: ad5380: convert to use maple tree register cache

The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache.

Signed-off-by: chuguangqing <chuguangqing@inspur.com>
Link: https://patch.msgid.link/20250611085838.4761-3-chuguangqing@inspur.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: chemical: bme680: convert to use maple tree register cache

The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache.

Signed-off-by: chuguangqing <chuguangqing@inspur.com>
Link: https://patch.msgid.link/20250611085838.4761-2-chuguangqing@inspur.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: ad7173: check return value of spi_setup()

Check the return value of spi_setup() and propagate the error in the
ad7173_probe() function. This is unlikely to happen since virtually
every SPI controller supports SPI_MODE_3, but still always a good idea
to check the return value.

Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250611-iio-adc-ad7173-check-spi_setup-return-v1-1-4d6f9ef0a2e4@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: trigger: stm32-lptimer: Fix build warnings about export.h

After commit a934a57a42f6 ("scripts/misc-check: check missing #include
<linux/export.h> when W=1") and commit 7d95680d64ac ("scripts/misc-check:
check unnecessary #include <linux/export.h> when W=1") we get the build
warning with W=1:

drivers/iio/trigger/stm32-lptimer-trigger.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing

Fix it.

Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com>
Acked-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://patch.msgid.link/20250610124855.269158-5-antonio.borneo@foss.st.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: trigger: stm32-timer: Fix build warnings about export.h

After commit a934a57a42f6 ("scripts/misc-check: check missing #include
<linux/export.h> when W=1") and commit 7d95680d64ac ("scripts/misc-check:
check unnecessary #include <linux/export.h> when W=1") we get the build
warning with W=1:

drivers/iio/trigger/stm32-timer-trigger.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing

Fix it.

Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com>
Acked-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://patch.msgid.link/20250610124855.269158-4-antonio.borneo@foss.st.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: stm32-dfsdm: Fix build warnings about export.h

After commit a934a57a42f6 ("scripts/misc-check: check missing #include
<linux/export.h> when W=1") and commit 7d95680d64ac ("scripts/misc-check:
check unnecessary #include <linux/export.h> when W=1") we get the build
warnings with W=1:

drivers/iio/adc/stm32-dfsdm-adc.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/iio/adc/stm32-dfsdm-core.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing

Fix them.

Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com>
Acked-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://patch.msgid.link/20250610124855.269158-3-antonio.borneo@foss.st.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: potentiometer: Drop unused export.h includes

Resolves:
  warning: EXPORT_SYMBOL() is not used, but #include <linux/export.h> is present

Reviewed-by: Andy Shevchenko <andy@kernel.org>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://patch.msgid.link/20250609070616.3923709-2-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: ad7405: add ad7405 driver

Add support for the AD7405/ADUM770x, a high performance isolated ADC,
1-channel, 16-bit with a second-order Σ-Δ modulator that converts an
analog input signal into a high speed, single-bit data stream.

Signed-off-by: Pop Ioan Daniel <pop.ioan-daniel@analog.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://patch.msgid.link/20250605150948.3091827-6-pop.ioan-daniel@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: iio: adc: add ad7405

Add devicetree bindings for ad7405/adum770x family.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Pop Ioan Daniel <pop.ioan-daniel@analog.com>
Link: https://patch.msgid.link/20250605150948.3091827-5-pop.ioan-daniel@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: adi-axi-adc: add axi_adc_oversampling_ratio_set

Add support for setting decimation rate.

Reviewed-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Pop Ioan Daniel <pop.ioan-daniel@analog.com>
Link: https://patch.msgid.link/20250605150948.3091827-4-pop.ioan-daniel@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: backend: update iio_backend_oversampling_ratio_set

Add chan parameter to iio_backend_oversampling_ratio_set() to allow
for contexts where the channel must be specified. Modify all
existing users.

Reviewed-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Pop Ioan Daniel <pop.ioan-daniel@analog.com>
Link: https://patch.msgid.link/20250605150948.3091827-3-pop.ioan-daniel@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: ad4851: ad4851_set_oversampling_ratio parameters update

Remove chan parameter from ad4851_set_oversampling_ratio parameters
list because the parameter is not used.

Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Pop Ioan Daniel <pop.ioan-daniel@analog.com>
Link: https://patch.msgid.link/20250605150948.3091827-2-pop.ioan-daniel@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: accel: adxl313: add debug register

Add IIO debug register for general sensor debugging.

Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
Link: https://patch.msgid.link/20250601172139.59156-2-l.rubusch@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: cros_ec_sensors: add cros_ec_activity driver

ChromeOS EC can report activity information derived from the
accelerometer:
- Reports on-body/off-body as a proximity event.
- Reports significant motion as an activity event.

This new sensor is a virtual sensor, included only when the EC firmware
is compiled with the appropriate module.

Signed-off-by: Gwendal Grignou <gwendal@google.com>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://patch.msgid.link/20250604053903.1376465-1-gwendal@google.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: ti-ads131e08: Fix spelling mistake "tweek" -> "tweak"

There is a spelling mistake in variable tweek_offset and in comment
blocks. Fix these.

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://patch.msgid.link/20250603165706.126031-1-colin.i.king@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: ad7606: add gain calibration support

Add gain calibration support, using resistor values set on devicetree,
values to be set accordingly with ADC external RFilter, as explained in
the ad7606c-16 datasheet, rev0, page 37.

Usage example in the fdt yaml documentation.

Signed-off-by: Angelo Dureghello <adureghello@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250606-wip-bl-ad7606-calibration-v9-7-6e014a1f92a2@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: ad7606: rename chan_scale to a more generic chan_info

Non functional, renaming chan-related chan_scale structure to a more
generic chan_info, to host other chan specific settings, not just
scale-related.

Signed-off-by: Angelo Dureghello <adureghello@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250606-wip-bl-ad7606-calibration-v9-6-6e014a1f92a2@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: ad7606: exit for invalid fdt dt_schema properties

Fix ad7606_get_chan_config() fdt parsing function to exit for error in
case of invalid dt_schema values.

Idea is to not proceed when there are values that are not allowed under
the dt_schema.

Signed-off-by: Angelo Dureghello <adureghello@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250606-wip-bl-ad7606-calibration-v9-5-6e014a1f92a2@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: iio: adc: adi,ad7606: add gain calibration support

Add gain calibration support by a per-channel resistor value.

Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Angelo Dureghello <adureghello@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250606-wip-bl-ad7606-calibration-v9-4-6e014a1f92a2@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: ad7606: add offset and phase calibration support

Add support for offset and phase calibration, only for
devices that support software mode, that are:

ad7606b
ad7606c-16
ad7606c-18

Tested-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Angelo Dureghello <adureghello@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250606-wip-bl-ad7606-calibration-v9-3-6e014a1f92a2@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: core: add ADC delay calibration definition

ADCs as ad7606 implement a phase calibration as a delay. Add such
definition, needed for ad7606.

Signed-off-by: Angelo Dureghello <adureghello@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250606-wip-bl-ad7606-calibration-v9-2-6e014a1f92a2@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Documentation: ABI: IIO: add new convdelay documentation

Add new IIO "convdelay" documentation.

The ad7606 implements a phase calibation feature, in nanoseconds.
Being this a time delay, using the convdelay suffix.

Signed-off-by: Angelo Dureghello <adureghello@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250606-wip-bl-ad7606-calibration-v9-1-6e014a1f92a2@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: ad7768-1: Ensure SYNC_IN pulse minimum timing requirement

The SYNC_IN pulse width must be at least 1.5 x Tmclk, corresponding to
~2.5 µs at the lowest supported MCLK frequency. Add a 3 µs delay to
ensure reliable synchronization timing even for the worst-case scenario.

Signed-off-by: Jonathan Santos <Jonathan.Santos@analog.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/d3ee92a533cd1207cf5c5cc4d7bdbb5c6c267f68.1749063024.git.Jonathan.Santos@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: iio: gyroscope: invensense,itg3200: add binding

There is no txt file for it, add yaml for invensense,itg3200 gyroscope
given existing driver and use in DTS.

Signed-off-by: Rodrigo Gobbi <rodrigo.gobbi.7@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250527210308.4693-1-rodrigo.gobbi.7@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: bmi160: suspend and resume triggering on relevant pm operations

Prevent triggers from stop working after the device has entered sleep:
use iio_device_suspend_triggering and iio_device_resume_triggering helpers.

Closes: https://lore.kernel.org/all/31d7f7aa-e834-4fd0-a66a-e0ff528425dc@gmail.com
Signed-off-by: Denis Benato <benato.denis96@gmail.com>
Link: https://patch.msgid.link/20250525142530.71955-3-benato.denis96@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: bmi270: suspend and resume triggering on relevant pm operations

Prevent triggers from stop working after the device has entered sleep:
use iio_device_suspend_triggering and iio_device_resume_triggering helpers.

Closes: https://lore.kernel.org/all/31d7f7aa-e834-4fd0-a66a-e0ff528425dc@gmail.com
Signed-off-by: Denis Benato <benato.denis96@gmail.com>
Tested-by: Justin Weiss <justin@justinweiss.com>
Link: https://patch.msgid.link/20250525142530.71955-2-benato.denis96@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: ad7606: add enabling of optional Vrefin voltage

Add optional refin voltage enabling. The property "refin-supply" is
already available and optional in the current fdt dt_schema.

Note that the driver does not need to take any actions if the supply
is not present because a pin strap is used to change the behavior
of the device if an external reference is connected.

Signed-off-by: Angelo Dureghello <adureghello@baylibre.com>
Link: https://patch.msgid.link/20250530-wip-bl-ad7606-reference-voltages-v2-2-d5e1ad7e6f14@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: ad7606: enable Vdrive power supply

Enable Vdrive power supply. The "vdrive-supply" property is mandatory,
already declared in fdt dt_schema.

Signed-off-by: Angelo Dureghello <adureghello@baylibre.com>
Link: https://patch.msgid.link/20250530-wip-bl-ad7606-reference-voltages-v2-1-d5e1ad7e6f14@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: iio: adc: st,spear600-adc: txt to yaml format conversion.

Straight forward conversion from spear-adc.txt into yaml format.

Signed-off-by: Rodrigo Gobbi <rodrigo.gobbi.7@gmail.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20250522204130.21604-1-rodrigo.gobbi.7@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: ad7476: Support ROHM BU79100G

ROHM BU79100G is a 12-bit, single channel ADC. From the software point
of view it is identical to the TI's ADS7866. Support reading ADC
measurements using the ad7476.c

Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://patch.msgid.link/aDk2qNE9LTVnfAFM@mva-rohm
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: Remove unused macro definition for driver and IRQ name

These macro definitions are completely unused. Remove them.

Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
Link: https://patch.msgid.link/0dec4fe7b2bdc90d06163ac75a53b97d4ae31c21.1748356671.git.waqar.hameed@axis.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: Remove single use of macro definition for regmap name

There is really no reason for having the `regmap` name as a macro
definition if it is only used once directly in `struct regmap_config`.
It is also more readable this way. Remove these macro definitions and
instead use the string literal directly.

Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
Link: https://patch.msgid.link/3a8572de8316c7d2746c2ccea8c478f594221319.1748356671.git.waqar.hameed@axis.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: Remove single use of macro definition for IRQ name

There is really no reason for having the IRQ name as a macro definition
if it is only used once (often in functions requesting the IRQ). It
is also more readable this way. Remove these macro definitions and
instead use the string literal directly.

Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
Link: https://patch.msgid.link/3dc06cb2a83d292c50d9758643aad37ca5c6d95c.1748356671.git.waqar.hameed@axis.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: Remove single use of macro definition for driver name

There is really no reason for having the driver name as a macro
definition if it is only used once (often as `.name` in `struct
device_driver`). It is also more readable this way. Remove these macro
definitions and instead use the string literal directly.

Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
Link: https://patch.msgid.link/4840779a167e027b8be77c82f7a4f27210ef084a.1748356671.git.waqar.hameed@axis.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: imu: inv_mpu6050: refactor aux read/write to use shared xfer logic

Refactors inv_mpu_aux_read() and inv_mpu_aux_write() to extract the common
I2C transfer sequence into inv_mpu_i2c_master_xfer(), which now handles
starting and stopping the I2C master, waiting for completion, disabling
SLV0, and checking for NACK errors.

This refactoring removes code duplication and improves maintainability.
No functional changes are intended.

Signed-off-by: Isabella Caselli <bellacaselli20@gmail.com>
Co-developed-by: Rodrigo Michelassi <rodrigo.michelassi@usp.br>
Signed-off-by: Rodrigo Michelassi <rodrigo.michelassi@usp.br>
Acked-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Link: https://patch.msgid.link/20250507184539.54658-1-bellacaselli20@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: buffer: Fix checkpatch.pl warning

Remove the following trivial warning:
"WARNING: Block comments should align the * on each line"

Signed-off-by: Gyeyoung Baek <gye976@gmail.com>
Link: https://patch.msgid.link/20250519-timestamp-v1-1-fcb4f6c2721c@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: amplifiers: ada4250: use DMA-safe memory for regmap_bulk_read()

Use DMA-safe memory instead of stack-allocated memory for the call to
regmap_bulk_read() in the ada4250_init() function as this could be used
directly by a SPI controller.

Also remove unnecessary use of get_unaligned_le16() and explicitly
include linux/types.h e.g. for __le16 while we are fixing this up.

Note this is DMA issue does not appear to be an actual bug due to
internals of the regmap SPI implementation.  However, for IIO we are
following guidance that we should not make that assumption.

Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250418-iio-amplifiers-ada4250-simplify-data-buffer-in-init-v1-1-7e7bd6dad423@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: accel: adxl345: add g-range configuration

Introduce a mechanism to be able to configure and work with the available
g-ranges keeping the precision of 13 digits.

Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
Link: https://patch.msgid.link/20250510224405.17910-3-l.rubusch@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: accel: adxl345: extend sample frequency adjustments

Introduce enums and functions to work with the sample frequency
adjustments. Let the sample frequency adjust via IIO and configure
a reasonable default.

Replace the old static sample frequency handling. During adjustment of
bw registers, measuring is disabled and afterwards enabled again.

Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
Link: https://patch.msgid.link/20250510224405.17910-2-l.rubusch@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: dac: adi-axi-dac: use unique bus free check

Use a unique function for the bus free check by polling, to reduce
duplicated code. An error is always thrown in case of timeout.

Signed-off-by: Angelo Dureghello <adureghello@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://patch.msgid.link/20250523-ad3552r-fix-bus-read-v3-2-310e726dd964@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Documentation: ABI: add sinc1 and sinc5+pf1 filter

Add sinc1 and sinc5+pf1 filter types used for ad4080 device.

Include these two options into the filter_type available attribute.

Add also the option for filter disabled.

Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Link: https://patch.msgid.link/20250516082630.8236-11-antoniu.miclaus@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: ad4080: add driver support

Add support for AD4080 high-speed, low noise, low distortion,
20-bit, Easy Drive, successive approximation register (SAR)
analog-to-digital converter (ADC).

Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Link: https://patch.msgid.link/20250516082630.8236-10-antoniu.miclaus@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: iio: adc: add ad4080

Add devicetree bindings for ad4080 family.

Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Link: https://patch.msgid.link/20250516082630.8236-9-antoniu.miclaus@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: adi-axi-adc: add num lanes support

Add support for setting the number of lanes enabled.

Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Link: https://patch.msgid.link/20250516082630.8236-8-antoniu.miclaus@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: adi-axi-adc: add data align process

Add support for starting the sync process used for data
capture alignment.

Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Link: https://patch.msgid.link/20250516082630.8236-7-antoniu.miclaus@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: adi-axi-adc: add filter type config

Add support for enabling/disabling filter based on the filter type
provided.

This feature is specific to the axi ad408x IP core, therefore add new
compatible string and corresponding iio_backend_ops.

Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Link: https://patch.msgid.link/20250516082630.8236-6-antoniu.miclaus@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: iio: adc: add ad408x axi variant

Add a new compatible and related bindings for the fpga-based
AD408x AXI IP core, a variant of the generic AXI ADC IP.

The AXI AD408x IP is a very similar HDL (fpga) variant of the
generic AXI ADC IP, intended to control ad408x familiy.

Although there are some particularities added for extended
control of the ad408x devices such as the filter configuration.

Wildcard naming is used to match the naming of the published
firmware.

Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250516082630.8236-5-antoniu.miclaus@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: backend: add support for number of lanes

Add iio backend support for number of lanes to be enabled.

Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Link: https://patch.msgid.link/20250516082630.8236-4-antoniu.miclaus@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: backend: add support for data alignment

Add backend support for staring the capture synchronization.
When activated, it initates a proccess that aligns the sample's most
significant bit (MSB) based solely on the captured data, without
considering any other external signals.

Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Link: https://patch.msgid.link/20250516082630.8236-3-antoniu.miclaus@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: backend: add support for filter config

Add backend support for digital filter type selection.

This setting can be adjusted within the IP cores interfacing devices.

The IP core can be configured based on the state of the actual
digital filter configuration of the part.

Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Link: https://patch.msgid.link/20250516082630.8236-2-antoniu.miclaus@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: irsd200: Remove print of error code from dev_err_probe

Since `dev_err_probe()` already prints the error code, there is no need
to additionally print it in the error message. Therefore, just remove
them.

Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
Link: https://patch.msgid.link/83c5ed21654b1b98437247d0fef823237af641b4.1747415559.git.waqar.hameed@axis.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Linux 6.16-rc1

Merge tag 'turbostat-2025.06.08' of git://git./linux/kernel/git/lenb/linux

Pull turbostat updates from Len Brown:

 - Add initial DMR support, which required smarter RAPL probe

 - Fix AMD MSR RAPL energy reporting

 - Add RAPL power limit configuration output

 - Minor fixes

* tag 'turbostat-2025.06.08' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
  tools/power turbostat: version 2025.06.08
  tools/power turbostat: Add initial support for BartlettLake
  tools/power turbostat: Add initial support for DMR
  tools/power turbostat: Dump RAPL sysfs info
  tools/power turbostat: Avoid probing the same perf counters
  tools/power turbostat: Allow probing RAPL with platform_features->rapl_msrs cleared
  tools/power turbostat: Clean up add perf/msr counter logic
  tools/power turbostat: Introduce add_msr_counter()
  tools/power turbostat: Remove add_msr_perf_counter_()
  tools/power turbostat: Remove add_cstate_perf_counter_()
  tools/power turbostat: Remove add_rapl_perf_counter_()
  tools/power turbostat: Quit early for unsupported RAPL counters
  tools/power turbostat: Always check rapl_joules flag
  tools/power turbostat: Fix AMD package-energy reporting
  tools/power turbostat: Fix RAPL_GFX_ALL typo
  tools/power turbostat: Add Android support for MSR device handling
  tools/power turbostat.8: pm_domain wording fix
  tools/power turbostat.8: fix typo: idle_pct should be pct_idle

Merge tag 'timers-cleanups-2025-06-08' of git://git./linux/kernel/git/tip/tip

Pull timer cleanup from Thomas Gleixner:
 "The delayed from_timer() API cleanup:

  The renaming to the timer_*() namespace was delayed due massive
  conflicts against Linux-next. Now that everything is upstream finish
  the conversion"

* tag 'timers-cleanups-2025-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  treewide, timers: Rename from_timer() to timer_container_of()

Merge tag 'x86-urgent-2025-06-08' of git://git./linux/kernel/git/tip/tip

Pull x86 fixes from Thomas Gleixner:
 "A small set of x86 fixes:

   - Cure IO bitmap inconsistencies

     A failed fork cleans up all resources of the newly created thread
     via exit_thread(). exit_thread() invokes io_bitmap_exit() which
     does the IO bitmap cleanups, which unfortunately assume that the
     cleanup is related to the current task, which is obviously bogus.

     Make it work correctly

   - A lockdep fix in the resctrl code removed the clearing of the
     command buffer in two places, which keeps stale error messages
     around. Bring them back.

   - Remove unused trace events"

* tag 'x86-urgent-2025-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  fs/resctrl: Restore the rdt_last_cmd_clear() calls after acquiring rdtgroup_mutex
  x86/iopl: Cure TIF_IO_BITMAP inconsistencies
  x86/fpu: Remove unused trace events

Merge tag 'timers-urgent-2025-06-08' of git://git./linux/kernel/git/tip/tip

Pull timer fix from Thomas Gleixner:
 "Add the missing seq_file forward declaration in the timer namespace
  header"

* tag 'timers-urgent-2025-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  timens: Add struct seq_file forward declaration

tools/power turbostat: version 2025.06.08

Add initial DMR support, which required smarter RAPL probe
Fix AMD MSR RAPL energy reporting
Add RAPL power limit configuration output
Minor fixes

Signed-off-by: Len Brown <len.brown@intel.com>

tools/power turbostat: Add initial support for BartlettLake

Add initial support for BartlettLake.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

tools/power turbostat: Add initial support for DMR

Add initial support for DMR.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

tools/power turbostat: Dump RAPL sysfs info

for example:

intel-rapl:1: psys 28.0s:100W 976.0us:100W
intel-rapl:0: package-0 28.0s:57W,max:15W 2.4ms:57W
intel-rapl:0/intel-rapl:0:0: core disabled
intel-rapl:0/intel-rapl:0:1: uncore disabled
intel-rapl-mmio:0: package-0 28.0s:28W,max:15W 2.4ms:57W

[lenb: simplified format]

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
squish me

Signed-off-by: Len Brown <len.brown@intel.com>

tools/power turbostat: Avoid probing the same perf counters

For the RAPL package energy status counter, Intel and AMD share the same
perf_subsys and perf_name, but with different MSR addresses.

Both rapl_counter_arch_infos[0] and rapl_counter_arch_infos[1] are
introduced to describe this counter for different Vendors.

As a result, the perf counter is probed twice, and causes a failure in
in get_rapl_counters() because expected_read_size and actual_read_size
don't match.

Fix the problem by skipping the already probed counter.

Note, this is not a perfect fix. For example, if different
vendors/platforms use the same MSR value for different purpose, the code
can be fooled when it probes a rapl_counter_arch_infos[] entry that does
not belong to the running Vendor/Platform.

In a long run, better to put rapl_counter_arch_infos[] into the
platform_features so that this becomes Vendor/Platform specific.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

tools/power turbostat: Allow probing RAPL with platform_features->rapl_msrs cleared

platform_features->rapl_msrs describes the RAPL MSRs supported. While
RAPL Perf counters can be exposed from different kernel backend drivers,
e.g. RAPL MSR I/F driver, or RAPL TPMI I/F driver.

Thus, turbostat should first blindly probe all the available RAPL Perf
counters, and falls back to the RAPL MSR counters if they are listed in
platform_features->rapl_msrs.

With this, platforms that don't have RAPL MSRs can clear the
platform_features->rapl_msrs bits and use RAPL Perf counters only.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

tools/power turbostat: Clean up add perf/msr counter logic

Increase the code readability by moving the no_perf/no_msr flag and the
cai->perf_name/cai->msr sanity checks into the counter probe functions.

No functional change.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

tools/power turbostat: Introduce add_msr_counter()

probe_rapl_msr() is reused for probing RAPL MSR counters, cstate MSR
counters and MPERF/APERF/SMI MSR counters, thus its name is misleading.

Similar to add_perf_counter(), introduce add_msr_counter() to probe a
counter via MSR. Introduce wrapper function add_rapl_msr_counter() at
the same time to add extra check for Zero return value for specified
RAPL counters.

No functional change intended.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

tools/power turbostat: Remove add_msr_perf_counter_()

As the only caller of add_msr_perf_counter_(), add_msr_perf_counter()
just gives extra debug output on top. There is no need to keep both
functions.

Remove add_msr_perf_counter_() and move all the logic to
add_msr_perf_counter().

No functional change.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

tools/power turbostat: Remove add_cstate_perf_counter_()

As the only caller of add_cstate_perf_counter_(),
add_cstate_perf_counter() just gives extra debug output on top. There is
no need to keep both functions.

Remove add_cstate_perf_counter_() and move all the logic to
add_cstate_perf_counter().

No functional change.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

tools/power turbostat: Remove add_rapl_perf_counter_()

As the only caller of add_rapl_perf_counter_(), add_rapl_perf_counter()
just gives extra debug output on top. There is no need to keep both
functions.

Remove add_rapl_perf_counter_() and move all the logic to
add_rapl_perf_counter().

No functional change.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

tools/power turbostat: Quit early for unsupported RAPL counters

Quit early for unsupported RAPL counters.

No functional change.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

tools/power turbostat: Always check rapl_joules flag

rapl_joules bit should always be checked even if
platform_features->rapl_msrs is not set or no_msr flag is used.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

tools/power turbostat: Fix AMD package-energy reporting

commit 05a2f07db888 ("tools/power turbostat: read RAPL counters via
perf") that adds support to read RAPL counters via perf defines the
notion of a RAPL domain_id which is set to physical_core_id on
platforms which support per_core_rapl counters (Eg: AMD processors
Family 17h onwards) and is set to the physical_package_id on all the
other platforms.

However, the physical_core_id is only unique within a package and on
platforms with multiple packages more than one core can have the same
physical_core_id and thus the same domain_id. (For eg, the first cores
of each package have the physical_core_id = 0). This results in all
these cores with the same physical_core_id using the same entry in the
rapl_counter_info_perdomain[]. Since rapl_perf_init() skips the
perf-initialization for cores whose domain_ids have already been
visited, cores that have the same physical_core_id always read the
perf file corresponding to the physical_core_id of the first package
and thus the package-energy is incorrectly reported to be the same
value for different packages.

Note: This issue only arises when RAPL counters are read via perf and
not when they are read via MSRs since in the latter case the MSRs are
read separately on each core.

Fix this issue by associating each CPU with rapl_core_id which is
unique across all the packages in the system.

Fixes: 05a2f07db888 ("tools/power turbostat: read RAPL counters via perf")
Signed-off-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Len Brown <len.brown@intel.com>