git.kernel.dk Git - linux-2.6-block.git/log

can: kvaser_pciefd: Use a single write when releasing RX buffers

Kvaser's PCIe cards uses the KCAN FPGA IP block which has dual 4K
buffers for incoming messages shared by all (currently up to eight)
channels. While the driver processes messages in one buffer, new
incoming messages are stored in the other and so on.

The design of KCAN is such that a buffer must be fully read and then
released. Releasing a buffer will make the FPGA switch buffers. If the
other buffer contains at least one incoming message the FPGA will also
instantly issue a new interrupt, if not the interrupt will be issued
after receiving the first new message.

With IRQx interrupts, it takes a little time for the interrupt to
happen, enough for any previous ISR call to do it's business and
return, but MSI interrupts are way faster so this time is reduced to
almost nothing.

So with MSI, releasing the buffer HAS to be the very last action of
the ISR before returning, otherwise the new interrupt might be
"masked" by the kernel because the previous ISR call hasn't returned.
And the interrupts are edge-triggered so we cannot loose one, or the
ping-pong reading process will stop.

This is why this patch modifies the driver to use a single write to
the SRB_CMD register before returning.

Signed-off-by: Martin Jocic <martin.jocic@kvaser.com>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://patch.msgid.link/20240830153113.2081440-1-martin.jocic@kvaser.com
Fixes: 26ad340e582d ("can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices")
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

can: mcp251x: fix deadlock if an interrupt occurs during mcp251x_open

The mcp251x_hw_wake() function is called with the mpc_lock mutex held and
disables the interrupt handler so that no interrupts can be processed while
waking the device. If an interrupt has already occurred then waiting for
the interrupt handler to complete will deadlock because it will be trying
to acquire the same mutex.

CPU0                           CPU1
----                           ----
mcp251x_open()
mutex_lock(&priv->mcp_lock)
  request_threaded_irq()
                               <interrupt>
                               mcp251x_can_ist()
                                mutex_lock(&priv->mcp_lock)
  mcp251x_hw_wake()
   disable_irq() <-- deadlock

Use disable_irq_nosync() instead because the interrupt handler does
everything while holding the mutex so it doesn't matter if it's still
running.

Fixes: 8ce8c0abcba3 ("can: mcp251x: only reset hardware as required")
Signed-off-by: Simon Arlott <simon@octiron.net>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/4fc08687-1d80-43fe-9f0d-8ef8475e75f6@0882a8b5-c6c3-11e9-b005-00805fc181fe.uuid.home.arpa
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Merge patch series "can: mcp251xfd: fix ring/coalescing configuration"

Marc Kleine-Budde <mkl@pengutronix.de> says:

When changing from CAN-CC to CAN-FD mode the ring and/or coalescing
parameters might be too big.

This series fixes the problem and adds a safeguard to detect broken
coalescing configuration.

Link: https://lore.kernel.org/all/20240805-mcp251xfd-fix-ringconfig-v1-0-72086f0ca5ee@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

can: mcp251xfd: mcp251xfd_ring_init(): check TX-coalescing configuration

When changing the interface from CAN-CC to CAN-FD mode the old
coalescing parameters are re-used. This might cause problem, as the
configured parameters are too big for CAN-FD mode.

During testing an invalid TX coalescing configuration has been seen.
The problem should be been fixed in the previous patch, but add a
safeguard here to ensure that the number of TEF coalescing buffers (if
configured) is exactly the half of all TEF buffers.

Link: https://lore.kernel.org/all/20240805-mcp251xfd-fix-ringconfig-v1-2-72086f0ca5ee@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

can: mcp251xfd: fix ring configuration when switching from CAN-CC to CAN-FD mode

If the ring (rx, tx) and/or coalescing parameters (rx-frames-irq,
tx-frames-irq) have been configured while the interface was in CAN-CC
mode, but the interface is brought up in CAN-FD mode, the ring
parameters might be too big.

Use the default CAN-FD values in this case.

Fixes: 9263c2e92be9 ("can: mcp251xfd: ring: add support for runtime configurable RX/TX ring parameters")
Link: https://lore.kernel.org/all/20240805-mcp251xfd-fix-ringconfig-v1-1-72086f0ca5ee@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Merge patch series "can: m_can: Fix polling and other issues"

Markus Schneider-Pargmann <msp@baylibre.com> says:

these are a number of fixes for m_can that fix polling mode and some
other issues that I saw while working on the code.

Changes in v2
-------------
- Fixed one multiline comment
- Rebased to v6.11-rc1

Previous versions
-----------------
v1: https://lore.kernel.org/lkml/20240726195944.2414812-1-msp@baylibre.com/

Link: https://lore.kernel.org/all/20240805183047.305630-1-msp@baylibre.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

can: m_can: Limit coalescing to peripheral instances

The use of coalescing for non-peripheral chips in the current
implementation is limited to non-existing. Disable the possibility to
set coalescing through ethtool.

Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Link: https://lore.kernel.org/all/20240805183047.305630-8-msp@baylibre.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

can: m_can: Reset cached active_interrupts on start

To force writing the enabled interrupts, reset the active_interrupts
cache.

Fixes: 07f25091ca02 ("can: m_can: Implement receive coalescing")
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Link: https://lore.kernel.org/all/20240805183047.305630-7-msp@baylibre.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

can: m_can: disable_all_interrupts, not clear active_interrupts

active_interrupts is a cache for the enabled interrupts and not the
global masking of interrupts. Do not clear this variable otherwise we
may loose the state of the interrupts.

Fixes: 07f25091ca02 ("can: m_can: Implement receive coalescing")
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Link: https://lore.kernel.org/all/20240805183047.305630-6-msp@baylibre.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

can: m_can: Do not cancel timer from within timer

On setups without interrupts, the interrupt handler is called from a
timer callback. For non-peripheral receives napi is scheduled,
interrupts are disabled and the timer is canceled with a blocking call.
In case of an error this can happen as well.

Check if napi is scheduled in the timer callback after the interrupt
handler executed. If napi is scheduled, the timer is disabled. It will
be reenabled by m_can_poll().

Return error values from the interrupt handler so that interrupt threads
and timer callback can deal differently with it. In case of the timer
we only disable the timer. The rest will be done when stopping the
interface.

Fixes: b382380c0d2d ("can: m_can: Add hrtimer to generate software interrupt")
Fixes: a163c5761019 ("can: m_can: Start/Cancel polling timer together with interrupts")
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Link: https://lore.kernel.org/all/20240805183047.305630-5-msp@baylibre.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

can: m_can: Remove m_can_rx_peripheral indirection

m_can_rx_peripheral() is a wrapper around m_can_rx_handler() that calls
m_can_disable_all_interrupts() on error. The same handling for the same
error path is done in m_can_isr() as well.

So remove m_can_rx_peripheral() and do the call from m_can_isr()
directly.

Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Link: https://lore.kernel.org/all/20240805183047.305630-4-msp@baylibre.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

can: m_can: Remove coalesing disable in isr during suspend

We don't need to disable coalescing when the interrupt handler executes
while the chip is suspended. The coalescing is already reset during
suspend.

Fixes: 07f25091ca02 ("can: m_can: Implement receive coalescing")
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Link: https://lore.kernel.org/all/20240805183047.305630-3-msp@baylibre.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

can: m_can: Reset coalescing during suspend/resume

During resume the interrupts are limited to IR_RF0N and the chip keeps
running. In this case if coalescing is enabled and active we may miss
waterlevel interrupts during suspend. It is safer to reset the
coalescing by stopping the timer and adding IR_RF0N | IR_TEFN to the
interrupts.

This is a theoratical issue and probably extremely rare.

Cc: Martin Hundebøll <martin@geanix.com>
Fixes: 4a94d7e31cf5 ("can: m_can: allow keeping the transceiver running in suspend")
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Link: https://lore.kernel.org/all/20240805183047.305630-2-msp@baylibre.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

can: m_can: Release irq on error in m_can_open

It appears that the irq requested in m_can_open() may be leaked
if an error subsequently occurs: if m_can_start() fails.

Address this by calling free_irq in the unwind path for
such cases.

Flagged by Smatch.
Compile tested only.

Fixes: eaacfeaca7ad ("can: m_can: Call the RAM init directly from m_can_chip_config")
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/all/20240805-mcan-irq-v2-1-7154c0484819@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

can: bcm: Remove proc entry when dev is unregistered.

syzkaller reported a warning in bcm_connect() below. [0]

The repro calls connect() to vxcan1, removes vxcan1, and calls
connect() with ifindex == 0.

Calling connect() for a BCM socket allocates a proc entry.
Then, bcm_sk(sk)->bound is set to 1 to prevent further connect().

However, removing the bound device resets bcm_sk(sk)->bound to 0
in bcm_notify().

The 2nd connect() tries to allocate a proc entry with the same
name and sets NULL to bcm_sk(sk)->bcm_proc_read, leaking the
original proc entry.

Since the proc entry is available only for connect()ed sockets,
let's clean up the entry when the bound netdev is unregistered.

[0]:
proc_dir_entry 'can-bcm/2456' already registered
WARNING: CPU: 1 PID: 394 at fs/proc/generic.c:376 proc_register+0x645/0x8f0 fs/proc/generic.c:375
Modules linked in:
CPU: 1 PID: 394 Comm: syz-executor403 Not tainted 6.10.0-rc7-g852e42cc2dd4
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
RIP: 0010:proc_register+0x645/0x8f0 fs/proc/generic.c:375
Code: 00 00 00 00 00 48 85 ed 0f 85 97 02 00 00 4d 85 f6 0f 85 9f 02 00 00 48 c7 c7 9b cb cf 87 48 89 de 4c 89 fa e8 1c 6f eb fe 90 <0f> 0b 90 90 48 c7 c7 98 37 99 89 e8 cb 7e 22 05 bb 00 00 00 10 48
RSP: 0018:ffa0000000cd7c30 EFLAGS: 00010246
RAX: 9e129be1950f0200 RBX: ff1100011b51582c RCX: ff1100011857cd80
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000002
RBP: 0000000000000000 R08: ffd400000000000f R09: ff1100013e78cac0
R10: ffac800000cd7980 R11: ff1100013e12b1f0 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: ff1100011a99a2ec
FS: 00007fbd7086f740(0000) GS:ff1100013fd00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000200071c0 CR3: 0000000118556004 CR4: 0000000000771ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<TASK>
proc_create_net_single+0x144/0x210 fs/proc/proc_net.c:220
bcm_connect+0x472/0x840 net/can/bcm.c:1673
__sys_connect_file net/socket.c:2049 [inline]
__sys_connect+0x5d2/0x690 net/socket.c:2066
__do_sys_connect net/socket.c:2076 [inline]
__se_sys_connect net/socket.c:2073 [inline]
__x64_sys_connect+0x8f/0x100 net/socket.c:2073
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xd9/0x1c0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x7fbd708b0e5d
Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 73 9f 1b 00 f7 d8 64 89 01 48
RSP: 002b:00007fff8cd33f08 EFLAGS: 00000246 ORIG_RAX: 000000000000002a
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007fbd708b0e5d
RDX: 0000000000000010 RSI: 0000000020000040 RDI: 0000000000000003
RBP: 0000000000000000 R08: 0000000000000040 R09: 0000000000000040
R10: 0000000000000040 R11: 0000000000000246 R12: 00007fff8cd34098
R13: 0000000000401280 R14: 0000000000406de8 R15: 00007fbd70ab9000
</TASK>
remove_proc_entry: removing non-empty directory 'net/can-bcm', leaking at least '2456'

Fixes: ffd980f976e7 ("[CAN]: Add broadcast manager (bcm) protocol")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/all/20240722192842.37421-1-kuniyu@amazon.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

net: bridge: mcast: wait for previous gc cycles when removing port

syzbot hit a use-after-free[1] which is caused because the bridge doesn't
make sure that all previous garbage has been collected when removing a
port. What happens is:
      CPU 1                   CPU 2
start gc cycle           remove port
                         acquire gc lock first
wait for lock
                         call br_multicasg_gc() directly
acquire lock now but    free port
the port can be freed
while grp timers still
running

Make sure all previous gc cycles have finished by using flush_work before
freeing the port.

[1]
  BUG: KASAN: slab-use-after-free in br_multicast_port_group_expired+0x4c0/0x550 net/bridge/br_multicast.c:861
  Read of size 8 at addr ffff888071d6d000 by task syz.5.1232/9699

  CPU: 1 PID: 9699 Comm: syz.5.1232 Not tainted 6.10.0-rc5-syzkaller-00021-g24ca36a562d6 #0
  Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 06/07/2024
  Call Trace:
   <IRQ>
   __dump_stack lib/dump_stack.c:88 [inline]
   dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:114
   print_address_description mm/kasan/report.c:377 [inline]
   print_report+0xc3/0x620 mm/kasan/report.c:488
   kasan_report+0xd9/0x110 mm/kasan/report.c:601
   br_multicast_port_group_expired+0x4c0/0x550 net/bridge/br_multicast.c:861
   call_timer_fn+0x1a3/0x610 kernel/time/timer.c:1792
   expire_timers kernel/time/timer.c:1843 [inline]
   __run_timers+0x74b/0xaf0 kernel/time/timer.c:2417
   __run_timer_base kernel/time/timer.c:2428 [inline]
   __run_timer_base kernel/time/timer.c:2421 [inline]
   run_timer_base+0x111/0x190 kernel/time/timer.c:2437

Reported-by: syzbot+263426984509be19c9a0@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=263426984509be19c9a0
Fixes: e12cec65b554 ("net: bridge: mcast: destroy all entries via gc")
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20240802080730.3206303-1-razor@blackwall.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: usb: qmi_wwan: fix memory leak for not ip packets

Free the unused skb when not ip packets arrive.

Fixes: c6adf77953bc ("net: usb: qmi_wwan: add qmap mux protocol support")
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'virtio-net-rq-coalescing' into main

Heng Qi says:

====================
virtio-net: unbreak vq resizing if vq coalescing is not supported

Currently, if the driver does not negotiate the vq coalescing feature
but supports vq resize, the vq resize action, which could have been
successfully executed, is interrupted due to the failure in configuring
the vq coalescing parameters. This issue needs to be fixed.

Changelog
=========
v3->v4:
  - Add a comment for patch[2/2].

v2->v3:
  - Break out the feature check and the fix into separate patches.

v1->v2:
  - Rephrase the subject.
  - Put the feature check inside the virtnet_send_{r,t}x_ctrl_coal_vq_cmd.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

virtio-net: unbreak vq resizing when coalescing is not negotiated

Don't break the resize action if the vq coalescing feature
named VIRTIO_NET_F_VQ_NOTF_COAL is not negotiated.

Fixes: f61fe5f081cf ("virtio-net: fix the vq coalescing setting for vq resize")
Signed-off-by: Heng Qi <hengqi@linux.alibaba.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Eugenio Pé rez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

virtio-net: check feature before configuring the vq coalescing command

Virtio spec says:

The driver MUST have negotiated the VIRTIO_NET_F_VQ_NOTF_COAL
feature when issuing commands VIRTIO_NET_CTRL_NOTF_COAL_VQ_SET
and VIRTIO_NET_CTRL_NOTF_COAL_VQ_GET.

So we add the feature negotiation check to
virtnet_send_{r,t}x_ctrl_coal_vq_cmd as a basis for the next bugfix patch.

Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Heng Qi <hengqi@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/tcp: Disable TCP-AO static key after RCU grace period

The lifetime of TCP-AO static_key is the same as the last
tcp_ao_info. On the socket destruction tcp_ao_info ceases to be
with RCU grace period, while tcp-ao static branch is currently deferred
destructed. The static key definition is
: DEFINE_STATIC_KEY_DEFERRED_FALSE(tcp_ao_needed, HZ);

which means that if RCU grace period is delayed by more than a second
and tcp_ao_needed is in the process of disablement, other CPUs may
yet see tcp_ao_info which atent dead, but soon-to-be.
And that breaks the assumption of static_key_fast_inc_not_disabled().

See the comment near the definition:
> * The caller must make sure that the static key can't get disabled while
> * in this function. It doesn't patch jump labels, only adds a user to
> * an already enabled static key.

Originally it was introduced in commit eb8c507296f6 ("jump_label:
Prevent key->enabled int overflow"), which is needed for the atomic
contexts, one of which would be the creation of a full socket from a
request socket. In that atomic context, it's known by the presence
of the key (md5/ao) that the static branch is already enabled.
So, the ref counter for that static branch is just incremented
instead of holding the proper mutex.
static_key_fast_inc_not_disabled() is just a helper for such usage
case. But it must not be used if the static branch could get disabled
in parallel as it's not protected by jump_label_mutex and as a result,
races with jump_label_update() implementation details.

Happened on netdev test-bot[1], so not a theoretical issue:

[] jump_label: Fatal kernel bug, unexpected op at tcp_inbound_hash+0x1a7/0x870 [ffffffffa8c4e9b7] (eb 50 0f 1f 44 != 66 90 0f 1f 00)) size:2 type:1
[] ------------[ cut here ]------------
[] kernel BUG at arch/x86/kernel/jump_label.c:73!
[] Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN NOPTI
[] CPU: 3 PID: 243 Comm: kworker/3:3 Not tainted 6.10.0-virtme #1
[] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
[] Workqueue: events jump_label_update_timeout
[] RIP: 0010:__jump_label_patch+0x2f6/0x350
...
[] Call Trace:
[]  <TASK>
[]  arch_jump_label_transform_queue+0x6c/0x110
[]  __jump_label_update+0xef/0x350
[]  __static_key_slow_dec_cpuslocked.part.0+0x3c/0x60
[]  jump_label_update_timeout+0x2c/0x40
[]  process_one_work+0xe3b/0x1670
[]  worker_thread+0x587/0xce0
[]  kthread+0x28a/0x350
[]  ret_from_fork+0x31/0x70
[]  ret_from_fork_asm+0x1a/0x30
[]  </TASK>
[] Modules linked in: veth
[] ---[ end trace 0000000000000000 ]---
[] RIP: 0010:__jump_label_patch+0x2f6/0x350

[1]: https://netdev-3.bots.linux.dev/vmksft-tcp-ao-dbg/results/696681/5-connect-deny-ipv6/stderr

Cc: stable@kernel.org
Fixes: 67fa83f7c86a ("net/tcp: Add static_key for TCP-AO")
Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

gve: Fix use of netif_carrier_ok()

GVE driver wrongly relies on netif_carrier_ok() to check the
interface administrative state when resources are being
allocated/deallocated for queue(s). netif_carrier_ok() needs
to be replaced with netif_running() for all such cases.

Administrative state is the result of "ip link set dev <dev>
up/down". It reflects whether the administrator wants to use
the device for traffic and the corresponding resources have
been allocated.

Fixes: 5f08cd3d6423 ("gve: Alloc before freeing when adjusting queues")
Signed-off-by: Praveen Kaligineedi <pkaligineedi@google.com>
Reviewed-by: Shailend Chand <shailend@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20240801205619.987396-1-pkaligineedi@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: pse-pd: tps23881: Fix the device ID check

The DEVID register contains two pieces of information: the device ID in
the upper nibble, and the silicon revision number in the lower nibble.
The driver should work fine with any silicon revision, so let's mask
that out in the device ID check.

Fixes: 20e6d190ffe1 ("net: pse-pd: Add TI TPS23881 PSE controller driver")
Signed-off-by: Kyle Swenson <kyle.swenson@est.tech>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20240731154152.4020668-1-kyle.swenson@est.tech
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

sctp: Fix null-ptr-deref in reuseport_add_sock().

syzbot reported a null-ptr-deref while accessing sk2->sk_reuseport_cb in
reuseport_add_sock(). [0]

The repro first creates a listener with SO_REUSEPORT.  Then, it creates
another listener on the same port and concurrently closes the first
listener.

The second listen() calls reuseport_add_sock() with the first listener as
sk2, where sk2->sk_reuseport_cb is not expected to be cleared concurrently,
but the close() does clear it by reuseport_detach_sock().

The problem is SCTP does not properly synchronise reuseport_alloc(),
reuseport_add_sock(), and reuseport_detach_sock().

The caller of reuseport_alloc() and reuseport_{add,detach}_sock() must
provide synchronisation for sockets that are classified into the same
reuseport group.

Otherwise, such sockets form multiple identical reuseport groups, and
all groups except one would be silently dead.

  1. Two sockets call listen() concurrently
  2. No socket in the same group found in sctp_ep_hashtable[]
  3. Two sockets call reuseport_alloc() and form two reuseport groups
  4. Only one group hit first in __sctp_rcv_lookup_endpoint() receives
      incoming packets

Also, the reported null-ptr-deref could occur.

TCP/UDP guarantees that would not happen by holding the hash bucket lock.

Let's apply the locking strategy to __sctp_hash_endpoint() and
__sctp_unhash_endpoint().

[0]:
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000002: 0000 [#1] PREEMPT SMP KASAN PTI
KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017]
CPU: 1 UID: 0 PID: 10230 Comm: syz-executor119 Not tainted 6.10.0-syzkaller-12585-g301927d2d2eb #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 06/27/2024
RIP: 0010:reuseport_add_sock+0x27e/0x5e0 net/core/sock_reuseport.c:350
Code: 00 0f b7 5d 00 bf 01 00 00 00 89 de e8 1b a4 ff f7 83 fb 01 0f 85 a3 01 00 00 e8 6d a0 ff f7 49 8d 7e 12 48 89 f8 48 c1 e8 03 <42> 0f b6 04 28 84 c0 0f 85 4b 02 00 00 41 0f b7 5e 12 49 8d 7e 14
RSP: 0018:ffffc9000b947c98 EFLAGS: 00010202
RAX: 0000000000000002 RBX: ffff8880252ddf98 RCX: ffff888079478000
RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000012
RBP: 0000000000000001 R08: ffffffff8993e18d R09: 1ffffffff1fef385
R10: dffffc0000000000 R11: fffffbfff1fef386 R12: ffff8880252ddac0
R13: dffffc0000000000 R14: 0000000000000000 R15: 0000000000000000
FS:  00007f24e45b96c0(0000) GS:ffff8880b9300000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ffcced5f7b8 CR3: 00000000241be000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
__sctp_hash_endpoint net/sctp/input.c:762 [inline]
sctp_hash_endpoint+0x52a/0x600 net/sctp/input.c:790
sctp_listen_start net/sctp/socket.c:8570 [inline]
sctp_inet_listen+0x767/0xa20 net/sctp/socket.c:8625
__sys_listen_socket net/socket.c:1883 [inline]
__sys_listen+0x1b7/0x230 net/socket.c:1894
__do_sys_listen net/socket.c:1902 [inline]
__se_sys_listen net/socket.c:1900 [inline]
__x64_sys_listen+0x5a/0x70 net/socket.c:1900
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f24e46039b9
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 91 1a 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f24e45b9228 EFLAGS: 00000246 ORIG_RAX: 0000000000000032
RAX: ffffffffffffffda RBX: 00007f24e468e428 RCX: 00007f24e46039b9
RDX: 00007f24e46039b9 RSI: 0000000000000003 RDI: 0000000000000004
RBP: 00007f24e468e420 R08: 00007f24e45b96c0 R09: 00007f24e45b96c0
R10: 00007f24e45b96c0 R11: 0000000000000246 R12: 00007f24e468e42c
R13: 00007f24e465a5dc R14: 0020000000000001 R15: 00007ffcced5f7d8
</TASK>
Modules linked in:

Fixes: 6ba845740267 ("sctp: process sk_reuseport in sctp_get_port_local")
Reported-by: syzbot+e6979a5d2f10ecb700e4@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=e6979a5d2f10ecb700e4
Tested-by: syzbot+e6979a5d2f10ecb700e4@syzkaller.appspotmail.com
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/20240731234624.94055-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

MAINTAINERS: update status of sky2 and skge drivers

The old SysKonnect NIc's are not used or actively maintained anymore.
My sky2 NIC's are all in box in back corner of attic.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Link: https://patch.msgid.link/20240801162930.212299-1-stephen@networkplumber.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'mptcp-fix-endpoints-with-signal-and-subflow-flags'

Matthieu Baerts says:

====================
mptcp: fix endpoints with 'signal' and 'subflow' flags

When looking at improving the user experience around the MPTCP endpoints
setup, I noticed that setting an endpoint with both the 'signal' and the
'subflow' flags -- as it has been done in the past by users according to
bug reports we got -- was resulting on only announcing the endpoint, but
not using it to create subflows: the 'subflow' flag was then ignored.

My initial thought was to modify IPRoute2 to warn the user when the two
flags were set, but it doesn't sound normal to ignore one of them. I
then looked at modifying the kernel not to allow having the two flags
set, but when discussing about that with Mat, we thought it was maybe
not ideal to do that, as there might be use-cases, we might break some
configs. Then I saw it was working before v5.17. So instead, I fixed the
support on the kernel side (patch 5) using Paolo's suggestion. This also
includes a fix on the options side (patch 1: for v5.11+), an explicit
deny of some options combinations (patch 2: for v5.18+), and some
refactoring (patches 3 and 4) to ease the inclusion of the patch 5.

While at it, I added a new selftest (patch 7) to validate this case --
including a modification of the chk_add_nr helper to inverse the sides
were the counters are checked (patch 6) -- and allowed ADD_ADDR echo
just after the MP_JOIN 3WHS.

The selftests modification have the same Fixes tag as the previous
commit, but no 'Cc: Stable': if the backport can work, that's good --
but it still need to be verified by running the selftests -- if not, no
need to worry, many CIs will use the selftests from the last stable
version to validate previous stable releases.
====================

Link: https://patch.msgid.link/20240731-upstream-net-20240731-mptcp-endp-subflow-signal-v1-0-c8a9b036493b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: mptcp: join: test both signal & subflow

It should be quite uncommon to set both the subflow and the signal
flags: the initiator of the connection is typically the one creating new
subflows, not the other peer, then no need to announce additional local
addresses, and use it to create subflows.

But some people might be confused about the flags, and set both "just to
be sure at least the right one is set". To verify the previous fix, and
avoid future regressions, this specific case is now validated: the
client announces a new address, and initiates a new subflow from the
same address.

While working on this, another bug has been noticed, where the client
reset the new subflow because an ADD_ADDR echo got received as the 3rd
ACK: this new test also explicitly checks that no RST have been sent by
the client and server.

The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.

Fixes: 86e39e04482b ("mptcp: keep track of local endpoint still available for each msk")
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240731-upstream-net-20240731-mptcp-endp-subflow-signal-v1-7-c8a9b036493b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: mptcp: join: ability to invert ADD_ADDR check

In the following commit, the client will initiate the ADD_ADDR, instead
of the server. We need to way to verify the ADD_ADDR have been correctly
sent.

Note: the default expected counters for when the port number is given
are never changed by the caller, no need to accept them as parameter
then.

The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.

Fixes: 86e39e04482b ("mptcp: keep track of local endpoint still available for each msk")
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240731-upstream-net-20240731-mptcp-endp-subflow-signal-v1-6-c8a9b036493b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mptcp: pm: do not ignore 'subflow' if 'signal' flag is also set

Up to the 'Fixes' commit, having an endpoint with both the 'signal' and
'subflow' flags, resulted in the creation of a subflow and an address
announcement using the address linked to this endpoint. After this
commit, only the address announcement was done, ignoring the 'subflow'
flag.

That's because the same bitmap is used for the two flags. It is OK to
keep this single bitmap, the already selected local endpoint simply have
to be re-used, but not via select_local_address() not to look at the
just modified bitmap.

Note that it is unusual to set the two flags together: creating a new
subflow using a new local address will implicitly advertise it to the
other peer. So in theory, no need to advertise it explicitly as well.
Maybe there are use-cases -- the subflow might not reach the other peer
that way, we can ask the other peer to try initiating the new subflow
without delay -- or very likely the user is confused, and put both flags
"just to be sure at least the right one is set". Still, if it is
allowed, the kernel should do what has been asked: using this endpoint
to announce the address and to create a new subflow from it.

An alternative is to forbid the use of the two flags together, but
that's probably too late, there are maybe use-cases, and it was working
before. This patch will avoid people complaining subflows are not
created using the endpoint they added with the 'subflow' and 'signal'
flag.

Note that with the current patch, the subflow might not be created in
some corner cases, e.g. if the 'subflows' limit was reached when sending
the ADD_ADDR, but changed later on. It is probably not worth splitting
id_avail_bitmap per target ('signal', 'subflow'), which will add another
large field to the msk "just" to track (again) endpoints. Anyway,
currently when the limits are changed, the kernel doesn't check if new
subflows can be created or removed, because we would need to keep track
of the received ADD_ADDR, and more. It sounds OK to assume that the
limits should be properly configured before establishing new
connections.

Fixes: 86e39e04482b ("mptcp: keep track of local endpoint still available for each msk")
Cc: stable@vger.kernel.org
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240731-upstream-net-20240731-mptcp-endp-subflow-signal-v1-5-c8a9b036493b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mptcp: pm: don't try to create sf if alloc failed

It sounds better to avoid wasting cycles and / or put extreme memory
pressure on the system by trying to create new subflows if it was not
possible to add a new item in the announce list.

While at it, a warning is now printed if the entry was already in the
list as it should not happen with the in-kernel path-manager. With this
PM, mptcp_pm_alloc_anno_list() should only fail in case of memory
pressure.

Fixes: b6c08380860b ("mptcp: remove addr and subflow in PM netlink")
Cc: stable@vger.kernel.org
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240731-upstream-net-20240731-mptcp-endp-subflow-signal-v1-4-c8a9b036493b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mptcp: pm: reduce indentation blocks

That will simplify the following commits.

No functional changes intended.

Suggested-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240731-upstream-net-20240731-mptcp-endp-subflow-signal-v1-3-c8a9b036493b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mptcp: pm: deny endp with signal + subflow + port

As mentioned in the 'Fixes' commit, the port flag is only supported by
the 'signal' flag, and not by the 'subflow' one. Then if both the
'signal' and 'subflow' flags are set, the problem is the same: the
feature cannot work with the 'subflow' flag.

Technically, if both the 'signal' and 'subflow' flags are set, it will
be possible to create the listening socket, but not to establish a
subflow using this source port. So better to explicitly deny it, not to
create some confusions because the expected behaviour is not possible.

Fixes: 09f12c3ab7a5 ("mptcp: allow to use port and non-signal in set_flags")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240731-upstream-net-20240731-mptcp-endp-subflow-signal-v1-2-c8a9b036493b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mptcp: fully established after ADD_ADDR echo on MPJ

Before this patch, receiving an ADD_ADDR echo on the just connected
MP_JOIN subflow -- initiator side, after the MP_JOIN 3WHS -- was
resulting in an MP_RESET. That's because only ACKs with a DSS or
ADD_ADDRs without the echo bit were allowed.

Not allowing the ADD_ADDR echo after an MP_CAPABLE 3WHS makes sense, as
we are not supposed to send an ADD_ADDR before because it requires to be
in full established mode first. For the MP_JOIN 3WHS, that's different:
the ADD_ADDR can be sent on a previous subflow, and the ADD_ADDR echo
can be received on the recently created one. The other peer will already
be in fully established, so it is allowed to send that.

We can then relax the conditions here to accept the ADD_ADDR echo for
MPJ subflows.

Fixes: 67b12f792d5e ("mptcp: full fully established support after ADD_ADDR")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240731-upstream-net-20240731-mptcp-endp-subflow-signal-v1-1-c8a9b036493b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'net-6.11-rc2' of git://git./linux/kernel/git/netdev/net

Pull networking fixes from Paolo Abeni:
"Including fixes from wireless, bleutooth, BPF and netfilter.

  Current release - regressions:

   - core: drop bad gso csum_start and offset in virtio_net_hdr

   - wifi: mt76: fix null pointer access in mt792x_mac_link_bss_remove

   - eth: tun: add missing bpf_net_ctx_clear() in do_xdp_generic()

   - phy: aquantia: only poll GLOBAL_CFG regs on aqr113, aqr113c and
     aqr115c

  Current release - new code bugs:

   - smc: prevent UAF in inet_create()

   - bluetooth: btmtk: fix kernel crash when entering btmtk_usb_suspend

   - eth: bnxt: reject unsupported hash functions

  Previous releases - regressions:

   - sched: act_ct: take care of padding in struct zones_ht_key

   - netfilter: fix null-ptr-deref in iptable_nat_table_init().

   - tcp: adjust clamping window for applications specifying SO_RCVBUF

  Previous releases - always broken:

   - ethtool: rss: small fixes to spec and GET

   - mptcp:
      - fix signal endpoint re-add
      - pm: fix backup support in signal endpoints

   - wifi: ath12k: fix soft lockup on suspend

   - eth: bnxt_en: fix RSS logic in __bnxt_reserve_rings()

   - eth: ice: fix AF_XDP ZC timeout and concurrency issues

   - eth: mlx5:
      - fix missing lock on sync reset reload
      - fix error handling in irq_pool_request_irq"

* tag 'net-6.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (76 commits)
  mptcp: fix duplicate data handling
  mptcp: fix bad RCVPRUNED mib accounting
  ipv6: fix ndisc_is_useropt() handling for PIO
  igc: Fix double reset adapter triggered from a single taprio cmd
  net: MAINTAINERS: Demote Qualcomm IPA to "maintained"
  net: wan: fsl_qmc_hdlc: Discard received CRC
  net: wan: fsl_qmc_hdlc: Convert carrier_lock spinlock to a mutex
  net/mlx5e: Add a check for the return value from mlx5_port_set_eth_ptys
  net/mlx5e: Fix CT entry update leaks of modify header context
  net/mlx5e: Require mlx5 tc classifier action support for IPsec prio capability
  net/mlx5: Fix missing lock on sync reset reload
  net/mlx5: Lag, don't use the hardcoded value of the first port
  net/mlx5: DR, Fix 'stack guard page was hit' error in dr_rule
  net/mlx5: Fix error handling in irq_pool_request_irq
  net/mlx5: Always drain health in shutdown callback
  net: Add skbuff.h to MAINTAINERS
  r8169: don't increment tx_dropped in case of NETDEV_TX_BUSY
  netfilter: iptables: Fix potential null-ptr-deref in ip6table_nat_table_init().
  netfilter: iptables: Fix null-ptr-deref in iptable_nat_table_init().
  net: drop bad gso csum_start and offset in virtio_net_hdr
  ...

Merge branch 'mptcp-fix-duplicate-data-handling'

Matthieu Baerts says:

====================
mptcp: fix duplicate data handling

In some cases, the subflow-level's copied_seq counter was incorrectly
increased, leading to an unexpected subflow reset.

Patch 1/2 fixes the RCVPRUNED MIB counter that was attached to the wrong
event since its introduction in v5.14, backported to v5.11.

Patch 2/2 fixes the copied_seq counter issues, is present since v5.10.

Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
====================

Link: https://patch.msgid.link/20240731-upstream-net-20240731-mptcp-dup-data-v1-0-bde833fa628a@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

mptcp: fix duplicate data handling

When a subflow receives and discards duplicate data, the mptcp
stack assumes that the consumed offset inside the current skb is
zero.

With multiple subflows receiving data simultaneously such assertion
does not held true. As a result the subflow-level copied_seq will
be incorrectly increased and later on the same subflow will observe
a bad mapping, leading to subflow reset.

Address the issue taking into account the skb consumed offset in
mptcp_subflow_discard_data().

Fixes: 04e4cd4f7ca4 ("mptcp: cleanup mptcp_subflow_discard_data()")
Cc: stable@vger.kernel.org
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/501
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

mptcp: fix bad RCVPRUNED mib accounting

Since its introduction, the mentioned MIB accounted for the wrong
event: wake-up being skipped as not-needed on some edge condition
instead of incoming skb being dropped after landing in the (subflow)
receive queue.

Move the increment in the correct location.

Fixes: ce599c516386 ("mptcp: properly account bulk freed memory")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Merge tag 'nf-24-07-31' of git://git./linux/kernel/git/netfilter/nf

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for net:

Fix a possible null-ptr-deref sometimes triggered by iptables-restore at
boot time. Register iptables {ipv4,ipv6} nat table pernet in first place
to fix this issue. Patch #1 and #2 from Kuniyuki Iwashima.

netfilter pull request 24-07-31

* tag 'nf-24-07-31' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: iptables: Fix potential null-ptr-deref in ip6table_nat_table_init().
netfilter: iptables: Fix null-ptr-deref in iptable_nat_table_init().
====================

Link: https://patch.msgid.link/20240731213046.6194-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

ipv6: fix ndisc_is_useropt() handling for PIO

The current logic only works if the PIO is between two
other ND user options. This fixes it so that the PIO
can also be either before or after other ND user options
(for example the first or last option in the RA).

side note: there's actually Android tests verifying
a portion of the old broken behaviour, so:
https://android-review.googlesource.com/c/kernel/tests/+/3196704
fixes those up.

Cc: Jen Linkova <furry@google.com>
Cc: Lorenzo Colitti <lorenzo@google.com>
Cc: Patrick Rohr <prohr@google.com>
Cc: David Ahern <dsahern@kernel.org>
Cc: YOSHIFUJI Hideaki / 吉藤英明 <yoshfuji@linux-ipv6.org>
Cc: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Fixes: 048c796beb6e ("ipv6: adjust ndisc_is_useropt() to also return true for PIO")
Link: https://patch.msgid.link/20240730001748.147636-1-maze@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

igc: Fix double reset adapter triggered from a single taprio cmd

Following the implementation of "igc: Add TransmissionOverrun counter"
patch, when a taprio command is triggered by user, igc processes two
commands: TAPRIO_CMD_REPLACE followed by TAPRIO_CMD_STATS. However, both
commands unconditionally pass through igc_tsn_offload_apply() which
evaluates and triggers reset adapter. The double reset causes issues in
the calculation of adapter->qbv_count in igc.

TAPRIO_CMD_REPLACE command is expected to reset the adapter since it
activates qbv. It's unexpected for TAPRIO_CMD_STATS to do the same
because it doesn't configure any driver-specific TSN settings. So, the
evaluation in igc_tsn_offload_apply() isn't needed for TAPRIO_CMD_STATS.

To address this, commands parsing are relocated to
igc_tsn_enable_qbv_scheduling(). Commands that don't require an adapter
reset will exit after processing, thus avoiding igc_tsn_offload_apply().

Fixes: d3750076d464 ("igc: Add TransmissionOverrun counter")
Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20240730173304.865479-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: MAINTAINERS: Demote Qualcomm IPA to "maintained"

To the best of my knowledge, Alex Elder is not being paid to support
Qualcomm IPA networking drivers, so drop the status from "supported" to
"maintained".

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Alex Elder <elder@kernel.org>
Link: https://patch.msgid.link/20240730104016.22103-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: wan: fsl_qmc_hdlc: Discard received CRC

Received frame from QMC contains the CRC.
Upper layers don't need this CRC and tcpdump mentioned trailing junk
data due to this CRC presence.

As some other HDLC driver, simply discard this CRC.

Fixes: d0f2258e79fd ("net: wan: Add support for QMC HDLC")
Cc: stable@vger.kernel.org
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240730063133.179598-1-herve.codina@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: wan: fsl_qmc_hdlc: Convert carrier_lock spinlock to a mutex

The carrier_lock spinlock protects the carrier detection. While it is
held, framer_get_status() is called which in turn takes a mutex.
This is not correct and can lead to a deadlock.

A run with PROVE_LOCKING enabled detected the issue:
  [ BUG: Invalid wait context ]
  ...
  c204ddbc (&framer->mutex){+.+.}-{3:3}, at: framer_get_status+0x40/0x78
  other info that might help us debug this:
  context-{4:4}
  2 locks held by ifconfig/146:
  #0: c0926a38 (rtnl_mutex){+.+.}-{3:3}, at: devinet_ioctl+0x12c/0x664
  #1: c2006a40 (&qmc_hdlc->carrier_lock){....}-{2:2}, at: qmc_hdlc_framer_set_carrier+0x30/0x98

Avoid the spinlock usage and convert carrier_lock to a mutex.

Fixes: 54762918ca85 ("net: wan: fsl_qmc_hdlc: Add framer support")
Cc: stable@vger.kernel.org
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240730063104.179553-1-herve.codina@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'mlx5-misc-fixes-2024-07-30'

Tariq Toukan says:

====================
mlx5 misc fixes 2024-07-30

This patchset provides misc bug fixes from the team to the mlx5 core and
Eth drivers.
====================

Link: https://patch.msgid.link/20240730061638.1831002-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/mlx5e: Add a check for the return value from mlx5_port_set_eth_ptys

Since the documentation for mlx5_toggle_port_link states that it should
only be used after setting the port register, we add a check for the
return value from mlx5_port_set_eth_ptys to ensure the register was
successfully set before calling it.

Fixes: 667daedaecd1 ("net/mlx5e: Toggle link only after modifying port parameters")
Signed-off-by: Shahar Shitrit <shshitrit@nvidia.com>
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Link: https://patch.msgid.link/20240730061638.1831002-9-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/mlx5e: Fix CT entry update leaks of modify header context

The cited commit allocates a new modify header to replace the old
one when updating CT entry. But if failed to allocate a new one, eg.
exceed the max number firmware can support, modify header will be
an error pointer that will trigger a panic when deallocating it. And
the old modify header point is copied to old attr. When the old
attr is freed, the old modify header is lost.

Fix it by restoring the old attr to attr when failed to allocate a
new modify header context. So when the CT entry is freed, the right
modify header context will be freed. And the panic of accessing
error pointer is also fixed.

Fixes: 94ceffb48eac ("net/mlx5e: Implement CT entry update")
Signed-off-by: Chris Mi <cmi@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Link: https://patch.msgid.link/20240730061638.1831002-8-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/mlx5e: Require mlx5 tc classifier action support for IPsec prio capability

Require mlx5 classifier action support when creating IPSec chains in
offload path. MLX5_IPSEC_CAP_PRIO should only be set if CONFIG_MLX5_CLS_ACT
is enabled. If CONFIG_MLX5_CLS_ACT=n and MLX5_IPSEC_CAP_PRIO is set,
configuring IPsec offload will fail due to the mlxx5 ipsec chain rules
failing to be created due to lack of classifier action support.

Fixes: fa5aa2f89073 ("net/mlx5e: Use chains for IPsec policy priority offload")
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Link: https://patch.msgid.link/20240730061638.1831002-7-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/mlx5: Fix missing lock on sync reset reload

On sync reset reload work, when remote host updates devlink on reload
actions performed on that host, it misses taking devlink lock before
calling devlink_remote_reload_actions_performed() which results in
triggering lock assert like the following:

WARNING: CPU: 4 PID: 1164 at net/devlink/core.c:261 devl_assert_locked+0x3e/0x50
…
CPU: 4 PID: 1164 Comm: kworker/u96:6 Tainted: G S      W          6.10.0-rc2+ #116
Hardware name: Supermicro SYS-2028TP-DECTR/X10DRT-PT, BIOS 2.0 12/18/2015
Workqueue: mlx5_fw_reset_events mlx5_sync_reset_reload_work [mlx5_core]
RIP: 0010:devl_assert_locked+0x3e/0x50
…
Call Trace:
  <TASK>
  ? __warn+0xa4/0x210
  ? devl_assert_locked+0x3e/0x50
  ? report_bug+0x160/0x280
  ? handle_bug+0x3f/0x80
  ? exc_invalid_op+0x17/0x40
  ? asm_exc_invalid_op+0x1a/0x20
  ? devl_assert_locked+0x3e/0x50
  devlink_notify+0x88/0x2b0
  ? mlx5_attach_device+0x20c/0x230 [mlx5_core]
  ? __pfx_devlink_notify+0x10/0x10
  ? process_one_work+0x4b6/0xbb0
  process_one_work+0x4b6/0xbb0
[…]

Fixes: 84a433a40d0e ("net/mlx5: Lock mlx5 devlink reload callbacks")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Link: https://patch.msgid.link/20240730061638.1831002-6-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/mlx5: Lag, don't use the hardcoded value of the first port

The cited commit didn't change the body of the loop as it should.
It shouldn't be using MLX5_LAG_P1.

Fixes: 7e978e7714d6 ("net/mlx5: Lag, use actual number of lag ports")
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Link: https://patch.msgid.link/20240730061638.1831002-5-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/mlx5: DR, Fix 'stack guard page was hit' error in dr_rule

This patch reduces the size of hw_ste_arr_optimized array that is
allocated on stack from 640 bytes (5 match STEs + 5 action STES)
to 448 bytes (2 match STEs + 5 action STES).
This fixes the 'stack guard page was hit' issue, while still fitting
majority of the usecases (up to 2 match STEs).

Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Link: https://patch.msgid.link/20240730061638.1831002-4-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/mlx5: Fix error handling in irq_pool_request_irq

In case mlx5_irq_alloc fails, the previously allocated index remains
in the XArray, which could lead to inconsistencies.

Fix it by adding error handling that erases the allocated index
from the XArray if mlx5_irq_alloc returns an error.

Fixes: c36326d38d93 ("net/mlx5: Round-Robin EQs over IRQs")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Maher Sanalla <msanalla@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Link: https://patch.msgid.link/20240730061638.1831002-3-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/mlx5: Always drain health in shutdown callback

There is no point in recovery during device shutdown. if health
work started need to wait for it to avoid races and NULL pointer
access.

Hence, drain health WQ on shutdown callback.

Fixes: 1958fc2f0712 ("net/mlx5: SF, Add auxiliary device driver")
Fixes: d2aa060d40fa ("net/mlx5: Cancel health poll before sending panic teardown command")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Link: https://patch.msgid.link/20240730061638.1831002-2-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: Add skbuff.h to MAINTAINERS

The network maintainers need to be copied if the skbuff.h is touched.

This also helps git-send-email to figure out the proper maintainers when
touching the file.

Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240730161404.2028175-1-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

r8169: don't increment tx_dropped in case of NETDEV_TX_BUSY

The skb isn't consumed in case of NETDEV_TX_BUSY, therefore don't
increment the tx_dropped counter.

Fixes: 188f4af04618 ("r8169: use NETDEV_TX_{BUSY/OK}")
Cc: stable@vger.kernel.org
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Link: https://patch.msgid.link/bbba9c48-8bac-4932-9aa1-d2ed63bc9433@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'for-netdev' of https://git./linux/kernel/git/bpf/bpf

Daniel Borkmann says:

====================
pull-request: bpf 2024-07-31

We've added 2 non-merge commits during the last 2 day(s) which contain
a total of 2 files changed, 2 insertions(+), 2 deletions(-).

The main changes are:

1) Fix BPF selftest build after tree sync with regards to a _GNU_SOURCE
   macro redefined compilation error, from Stanislav Fomichev.

2) Fix a wrong test in the ASSERT_OK() check in uprobe_syscall BPF selftest,
   from Jiri Olsa.

* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
  bpf/selftests: Fix ASSERT_OK condition check in uprobe_syscall test
  selftests/bpf: Filter out _GNU_SOURCE when compiling test_cpp
====================

Link: https://patch.msgid.link/20240731115706.19677-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

netfilter: iptables: Fix potential null-ptr-deref in ip6table_nat_table_init().

ip6table_nat_table_init() accesses net->gen->ptr[ip6table_nat_net_ops.id],
but the function is exposed to user space before the entry is allocated
via register_pernet_subsys().

Let's call register_pernet_subsys() before xt_register_template().

Fixes: fdacd57c79b7 ("netfilter: x_tables: never register tables by default")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: iptables: Fix null-ptr-deref in iptable_nat_table_init().

We had a report that iptables-restore sometimes triggered null-ptr-deref
at boot time. [0]

The problem is that iptable_nat_table_init() is exposed to user space
before the kernel fully initialises netns.

In the small race window, a user could call iptable_nat_table_init()
that accesses net_generic(net, iptable_nat_net_id), which is available
only after registering iptable_nat_net_ops.

Let's call register_pernet_subsys() before xt_register_template().

[0]:
bpfilter: Loaded bpfilter_umh pid 11702
Started bpfilter
BUG: kernel NULL pointer dereference, address: 0000000000000013
PF: supervisor write access in kernel mode
PF: error_code(0x0002) - not-present page
PGD 0 P4D 0
PREEMPT SMP NOPTI
CPU: 2 PID: 11879 Comm: iptables-restor Not tainted 6.1.92-99.174.amzn2023.x86_64 #1
Hardware name: Amazon EC2 c6i.4xlarge/, BIOS 1.0 10/16/2017
RIP: 0010:iptable_nat_table_init (net/ipv4/netfilter/iptable_nat.c:87 net/ipv4/netfilter/iptable_nat.c:121) iptable_nat
Code: 10 4c 89 f6 48 89 ef e8 0b 19 bb ff 41 89 c4 85 c0 75 38 41 83 c7 01 49 83 c6 28 41 83 ff 04 75 dc 48 8b 44 24 08 48 8b 0c 24 <48> 89 08 4c 89 ef e8 a2 3b a2 cf 48 83 c4 10 44 89 e0 5b 5d 41 5c
RSP: 0018:ffffbef902843cd0 EFLAGS: 00010246
RAX: 0000000000000013 RBX: ffff9f4b052caa20 RCX: ffff9f4b20988d80
RDX: 0000000000000000 RSI: 0000000000000064 RDI: ffffffffc04201c0
RBP: ffff9f4b29394000 R08: ffff9f4b07f77258 R09: ffff9f4b07f77240
R10: 0000000000000000 R11: ffff9f4b09635388 R12: 0000000000000000
R13: ffff9f4b1a3c6c00 R14: ffff9f4b20988e20 R15: 0000000000000004
FS: 00007f6284340000(0000) GS:ffff9f51fe280000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000013 CR3: 00000001d10a6005 CR4: 00000000007706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<TASK>
? show_trace_log_lvl (arch/x86/kernel/dumpstack.c:259)
? show_trace_log_lvl (arch/x86/kernel/dumpstack.c:259)
? xt_find_table_lock (net/netfilter/x_tables.c:1259)
? __die_body.cold (arch/x86/kernel/dumpstack.c:478 arch/x86/kernel/dumpstack.c:420)
? page_fault_oops (arch/x86/mm/fault.c:727)
? exc_page_fault (./arch/x86/include/asm/irqflags.h:40 ./arch/x86/include/asm/irqflags.h:75 arch/x86/mm/fault.c:1470 arch/x86/mm/fault.c:1518)
? asm_exc_page_fault (./arch/x86/include/asm/idtentry.h:570)
? iptable_nat_table_init (net/ipv4/netfilter/iptable_nat.c:87 net/ipv4/netfilter/iptable_nat.c:121) iptable_nat
xt_find_table_lock (net/netfilter/x_tables.c:1259)
xt_request_find_table_lock (net/netfilter/x_tables.c:1287)
get_info (net/ipv4/netfilter/ip_tables.c:965)
? security_capable (security/security.c:809 (discriminator 13))
? ns_capable (kernel/capability.c:376 kernel/capability.c:397)
? do_ipt_get_ctl (net/ipv4/netfilter/ip_tables.c:1656)
? bpfilter_send_req (net/bpfilter/bpfilter_kern.c:52) bpfilter
nf_getsockopt (net/netfilter/nf_sockopt.c:116)
ip_getsockopt (net/ipv4/ip_sockglue.c:1827)
__sys_getsockopt (net/socket.c:2327)
__x64_sys_getsockopt (net/socket.c:2342 net/socket.c:2339 net/socket.c:2339)
do_syscall_64 (arch/x86/entry/common.c:51 arch/x86/entry/common.c:81)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)
RIP: 0033:0x7f62844685ee
Code: 48 8b 0d 45 28 0f 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 49 89 ca b8 37 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 0a c3 66 0f 1f 84 00 00 00 00 00 48 8b 15 09
RSP: 002b:00007ffd1f83d638 EFLAGS: 00000246 ORIG_RAX: 0000000000000037
RAX: ffffffffffffffda RBX: 00007ffd1f83d680 RCX: 00007f62844685ee
RDX: 0000000000000040 RSI: 0000000000000000 RDI: 0000000000000004
RBP: 0000000000000004 R08: 00007ffd1f83d670 R09: 0000558798ffa2a0
R10: 00007ffd1f83d680 R11: 0000000000000246 R12: 00007ffd1f83e3b2
R13: 00007f628455baa0 R14: 00007ffd1f83d7b0 R15: 00007f628457a008
</TASK>
Modules linked in: iptable_nat(+) bpfilter rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache veth xt_state xt_connmark xt_nat xt_statistic xt_MASQUERADE xt_mark xt_addrtype ipt_REJECT nf_reject_ipv4 nft_chain_nat nf_nat xt_conntrack nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 xt_comment nft_compat nf_tables nfnetlink overlay nls_ascii nls_cp437 vfat fat ghash_clmulni_intel aesni_intel ena crypto_simd ptp cryptd i8042 pps_core serio button sunrpc sch_fq_codel configfs loop dm_mod fuse dax dmi_sysfs crc32_pclmul crc32c_intel efivarfs
CR2: 0000000000000013

Fixes: fdacd57c79b7 ("netfilter: x_tables: never register tables by default")
Reported-by: Takahiro Kawahara <takawaha@amazon.co.jp>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

minmax: fix up min3() and max3() too

David Laight pointed out that we should deal with the min3() and max3()
mess too, which still does excessive expansion.

And our current macros are actually rather broken.

In particular, the macros did this:

  #define min3(x, y, z) min((typeof(x))min(x, y), z)
  #define max3(x, y, z) max((typeof(x))max(x, y), z)

and that not only is a nested expansion of possibly very complex
arguments with all that involves, the typing with that "typeof()" cast
is completely wrong.

For example, imagine what happens in max3() if 'x' happens to be a
'unsigned char', but 'y' and 'z' are 'unsigned long'.  The types are
compatible, and there's no warning - but the result is just random
garbage.

No, I don't think we've ever hit that issue in practice, but since we
now have sane infrastructure for doing this right, let's just use it.
It fixes any excessive expansion, and also avoids these kinds of broken
type issues.

Requested-by: David Laight <David.Laight@aculab.com>
Acked-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'for-6.11-rc1-tag' of git://git./linux/kernel/git/kdave/linux

Pull btrfs fixes from David Sterba:

- fix regression in extent map rework when handling insertion of
   overlapping compressed extent

- fix unexpected file length when appending to a file using direct io
   and buffer not faulted in

- in zoned mode, fix accounting of unusable space when flipping
   read-only block group back to read-write

- fix page locking when COWing an inline range, assertion failure found
   by syzbot

- fix calculation of space info in debugging print

- tree-checker, add validation of data reference item

- fix a few -Wmaybe-uninitialized build warnings

* tag 'for-6.11-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: initialize location to fix -Wmaybe-uninitialized in btrfs_lookup_dentry()
  btrfs: fix corruption after buffer fault in during direct IO append write
  btrfs: zoned: fix zone_unusable accounting on making block group read-write again
  btrfs: do not subtract delalloc from avail bytes
  btrfs: make cow_file_range_inline() honor locked_page on error
  btrfs: fix corrupt read due to bad offset of a compressed extent map
  btrfs: tree-checker: validate dref root and objectid

Merge tag 'perf-tools-fixes-for-v6.11-2024-07-30' of git://git./linux/kernel/git/perf/perf-tools

Pull perf tools fixes from Namhyung Kim:
"Some more build fixes and a random crash fix:

   - Fix cross-build by setting pkg-config env according to the arch

   - Fix static build for missing library dependencies

   - Fix Segfault when callchain has no symbols"

* tag 'perf-tools-fixes-for-v6.11-2024-07-30' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
  perf docs: Document cross compilation
  perf: build: Link lib 'zstd' for static build
  perf: build: Link lib 'lzma' for static build
  perf: build: Only link libebl.a for old libdw
  perf: build: Set Python configuration for cross compilation
  perf: build: Setup PKG_CONFIG_LIBDIR for cross compilation
  perf tool: fix dereferencing NULL al->maps

Merge branch '100GbE' of git://git./linux/kernel/git/tnguy/net-queue

Tony Nguyen says:

====================
ice: fix AF_XDP ZC timeout and concurrency issues

Maciej Fijalkowski says:

Changes included in this patchset address an issue that customer has
been facing when AF_XDP ZC Tx sockets were used in combination with flow
control and regular Tx traffic.

After executing:
ethtool --set-priv-flags $dev link-down-on-close on
ethtool -A $dev rx on tx on

launching multiple ZC Tx sockets on $dev + pinging remote interface (so
that regular Tx traffic is present) and then going through down/up of
$dev, Tx timeout occurred and then most of the time ice driver was unable
to recover from that state.

These patches combined together solve the described above issue on
customer side. Main focus here is to forbid producing Tx descriptors when
either carrier is not yet initialized or process of bringing interface
down has already started.

v1: https://lore.kernel.org/netdev/20240708221416.625850-1-anthony.l.nguyen@intel.com/

* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
  ice: xsk: fix txq interrupt mapping
  ice: add missing WRITE_ONCE when clearing ice_rx_ring::xdp_prog
  ice: improve updating ice_{t,r}x_ring::xsk_pool
  ice: toggle netif_carrier when setting up XSK pool
  ice: modify error handling when setting XSK pool in ndo_bpf
  ice: replace synchronize_rcu with synchronize_net
  ice: don't busy wait for Rx queue disable in ice_qp_dis()
  ice: respect netif readiness in AF_XDP ZC related ndo's
====================

Link: https://patch.msgid.link/20240729200716.681496-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: drop bad gso csum_start and offset in virtio_net_hdr

Tighten csum_start and csum_offset checks in virtio_net_hdr_to_skb
for GSO packets.

The function already checks that a checksum requested with
VIRTIO_NET_HDR_F_NEEDS_CSUM is in skb linear. But for GSO packets
this might not hold for segs after segmentation.

Syzkaller demonstrated to reach this warning in skb_checksum_help

offset = skb_checksum_start_offset(skb);
ret = -EINVAL;
if (WARN_ON_ONCE(offset >= skb_headlen(skb)))

By injecting a TSO packet:

WARNING: CPU: 1 PID: 3539 at net/core/dev.c:3284 skb_checksum_help+0x3d0/0x5b0
ip_do_fragment+0x209/0x1b20 net/ipv4/ip_output.c:774
ip_finish_output_gso net/ipv4/ip_output.c:279 [inline]
__ip_finish_output+0x2bd/0x4b0 net/ipv4/ip_output.c:301
iptunnel_xmit+0x50c/0x930 net/ipv4/ip_tunnel_core.c:82
ip_tunnel_xmit+0x2296/0x2c70 net/ipv4/ip_tunnel.c:813
__gre_xmit net/ipv4/ip_gre.c:469 [inline]
ipgre_xmit+0x759/0xa60 net/ipv4/ip_gre.c:661
__netdev_start_xmit include/linux/netdevice.h:4850 [inline]
netdev_start_xmit include/linux/netdevice.h:4864 [inline]
xmit_one net/core/dev.c:3595 [inline]
dev_hard_start_xmit+0x261/0x8c0 net/core/dev.c:3611
__dev_queue_xmit+0x1b97/0x3c90 net/core/dev.c:4261
packet_snd net/packet/af_packet.c:3073 [inline]

The geometry of the bad input packet at tcp_gso_segment:

[   52.003050][ T8403] skb len=12202 headroom=244 headlen=12093 tailroom=0
[   52.003050][ T8403] mac=(168,24) mac_len=24 net=(192,52) trans=244
[   52.003050][ T8403] shinfo(txflags=0 nr_frags=1 gso(size=1552 type=3 segs=0))
[   52.003050][ T8403] csum(0x60000c7 start=199 offset=1536
ip_summed=3 complete_sw=0 valid=0 level=0)

Mitigate with stricter input validation.

csum_offset: for GSO packets, deduce the correct value from gso_type.
This is already done for USO. Extend it to TSO. Let UFO be:
udp[46]_ufo_fragment ignores these fields and always computes the
checksum in software.

csum_start: finding the real offset requires parsing to the transport
header. Do not add a parser, use existing segmentation parsing. Thanks
to SKB_GSO_DODGY, that also catches bad packets that are hw offloaded.
Again test both TSO and USO. Do not test UFO for the above reason, and
do not test UDP tunnel offload.

GSO packet are almost always CHECKSUM_PARTIAL. USO packets may be
CHECKSUM_NONE since commit 10154dbded6d6 ("udp: Allow GSO transmit
from devices with no checksum offload"), but then still these fields
are initialized correctly in udp4_hwcsum/udp6_hwcsum_outgoing. So no
need to test for ip_summed == CHECKSUM_PARTIAL first.

This revises an existing fix mentioned in the Fixes tag, which broke
small packets with GSO offload, as detected by kselftests.

Link: https://syzkaller.appspot.com/bug?extid=e1db31216c789f552871
Link: https://lore.kernel.org/netdev/20240723223109.2196886-1-kuba@kernel.org
Fixes: e269d79c7d35 ("net: missing check virtio")
Cc: stable@vger.kernel.org
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20240729201108.1615114-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: phy: aquantia: only poll GLOBAL_CFG regs on aqr113, aqr113c and aqr115c

Commit 708405f3e56e ("net: phy: aquantia: wait for the GLOBAL_CFG to
start returning real values") introduced a workaround for an issue
observed on aqr115c. However there were never any reports of it
happening on other models and the workaround has been reported to cause
and issue on aqr113c (and it may cause the same on any other model not
supporting 10M mode).

Let's limit the impact of the workaround to aqr113, aqr113c and aqr115c
and poll the 100M GLOBAL_CFG register instead as both models are known
to support it correctly.

Reported-by: Jon Hunter <jonathanh@nvidia.com>
Closes: https://lore.kernel.org/lkml/7c0140be-4325-4005-9068-7e0fc5ff344d@nvidia.com/
Fixes: 708405f3e56e ("net: phy: aquantia: wait for the GLOBAL_CFG to start returning real values")
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Antoine Tenart <atenart@kernel.org>
Link: https://patch.msgid.link/20240729150315.65798-1-brgl@bgdev.pl
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: phy: micrel: Fix the KSZ9131 MDI-X status issue

The MDIX status is not accurately reflecting the current state after the link
partner has manually altered its MDIX configuration while operating in forced
mode.

Access information about Auto mdix completion and pair selection from the
KSZ9131's Auto/MDI/MDI-X status register

Fixes: b64e6a8794d9 ("net: phy: micrel: Add PHY Auto/MDI/MDI-X set driver for KSZ9131")
Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20240725071125.13960-1-Raju.Lakkaraju@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

bpf/selftests: Fix ASSERT_OK condition check in uprobe_syscall test

Fixing ASSERT_OK condition check in uprobe_syscall test,
otherwise we return from test on pipe success.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/20240726180847.684584-1-jolsa@kernel.org

Merge tag 'chrome-platform-fixes-for-v6.11-rc2' of git://git./linux/kernel/git/chrome-platform/linux

Pull chrome-platform fix from Tzung-Bi Shih:
"Fix a race condition that sends multiple host commands at a time"

* tag 'chrome-platform-fixes-for-v6.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
platform/chrome: cros_ec_proto: Lock device when updating MKBP version

minmax: improve macro expansion and type checking

This clarifies the rules for min()/max()/clamp() type checking and makes
them a much more efficient macro expansion.

In particular, we now look at the type and range of the inputs to see
whether they work together, generating a mask of acceptable comparisons,
and then just verifying that the inputs have a shared case:

- an expression with a signed type can be used for
    (1) signed comparisons
    (2) unsigned comparisons if it is statically known to have a
        non-negative value

- an expression with an unsigned type can be used for
    (3) unsigned comparison
    (4) signed comparisons if the type is smaller than 'int' and thus
        the C integer promotion rules will make it signed anyway

Here rule (1) and (3) are obvious, and rule (2) is important in order to
allow obvious trivial constants to be used together with unsigned
values.

Rule (4) is not necessarily a good idea, but matches what we used to do,
and we have extant cases of this situation in the kernel.  Notably with
bcachefs having an expression like

min(bch2_bucket_sectors_dirty(a), ca->mi.bucket_size)

where bch2_bucket_sectors_dirty() returns an 's64', and
'ca->mi.bucket_size' is of type 'u16'.

Technically that bcachefs comparison is clearly sensible on a C type
level, because the 'u16' will go through the normal C integer promotion,
and become 'int', and then we're comparing two signed values and
everything looks sane.

However, it's not entirely clear that a 'min(s64,u16)' operation makes a
lot of conceptual sense, and it's possible that we will remove rule (4).
After all, the _reason_ we have these complicated type checks is exactly
that the C type promotion rules are not very intuitive.

But at least for now the rule is in place for backwards compatibility.

Also note that rule (2) existed before, but is hugely relaxed by this
commit.  It used to be true only for the simplest compile-time
non-negative integer constants.  The new macro model will allow cases
where the compiler can trivially see that an expression is non-negative
even if it isn't necessarily a constant.

For example, the amdgpu driver does

min_t(size_t, sizeof(fru_info->serial), pia[addr] & 0x3F));

because our old 'min()' macro would see that 'pia[addr] & 0x3F' is of
type 'int' and clearly not a C constant expression, so doing a 'min()'
with a 'size_t' is a signedness violation.

Our new 'min()' macro still sees that 'pia[addr] & 0x3F' is of type
'int', but is smart enough to also see that it is clearly non-negative,
and thus would allow that case without any complaints.

Cc: Arnd Bergmann <arnd@kernel.org>
Cc: David Laight <David.Laight@aculab.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

net: mvpp2: Don't re-use loop iterator

This function has a nested loop.  The problem is that both the inside
and outside loop use the same variable as an iterator.  I found this
via static analysis so I'm not sure the impact.  It could be that it
loops forever or, more likely, the loop exits early.

Fixes: 3a616b92a9d1 ("net: mvpp2: Add TX flow control support for jumbo frames")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/eaa8f403-7779-4d81-973d-a9ecddc0bf6f@stanley.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

btrfs: initialize location to fix -Wmaybe-uninitialized in btrfs_lookup_dentry()

Some arch + compiler combinations report a potentially unused variable
location in btrfs_lookup_dentry(). This is a false alert as the variable
is passed by value and always valid or there's an error. The compilers
cannot probably reason about that although btrfs_inode_by_name() is in
the same file.

   >  + /kisskb/src/fs/btrfs/inode.c: error: 'location.objectid' may be used
   +uninitialized in this function [-Werror=maybe-uninitialized]:  => 5603:9
   >  + /kisskb/src/fs/btrfs/inode.c: error: 'location.type' may be used
   +uninitialized in this function [-Werror=maybe-uninitialized]:  => 5674:5

   m68k-gcc8/m68k-allmodconfig
   mips-gcc8/mips-allmodconfig
   powerpc-gcc5/powerpc-all{mod,yes}config
   powerpc-gcc5/ppc64_defconfig

Initialize it to zero, this should fix the warnings and won't change the
behaviour as btrfs_inode_by_name() accepts only a root or inode item
types, otherwise returns an error.

Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/linux-btrfs/bd4e9928-17b3-9257-8ba7-6b7f9bbb639a@linux-m68k.org/
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

net/iucv: fix use after free in iucv_sock_close()

iucv_sever_path() is called from process context and from bh context.
iucv->path is used as indicator whether somebody else is taking care of
severing the path (or it is already removed / never existed).
This needs to be done with atomic compare and swap, otherwise there is a
small window where iucv_sock_close() will try to work with a path that has
already been severed and freed by iucv_callback_connrej() called by
iucv_tasklet_fn().

Example:
[452744.123844] Call Trace:
[452744.123845] ([<0000001e87f03880>] 0x1e87f03880)
[452744.123966]  [<00000000d593001e>] iucv_path_sever+0x96/0x138
[452744.124330]  [<000003ff801ddbca>] iucv_sever_path+0xc2/0xd0 [af_iucv]
[452744.124336]  [<000003ff801e01b6>] iucv_sock_close+0xa6/0x310 [af_iucv]
[452744.124341]  [<000003ff801e08cc>] iucv_sock_release+0x3c/0xd0 [af_iucv]
[452744.124345]  [<00000000d574794e>] __sock_release+0x5e/0xe8
[452744.124815]  [<00000000d5747a0c>] sock_close+0x34/0x48
[452744.124820]  [<00000000d5421642>] __fput+0xba/0x268
[452744.124826]  [<00000000d51b382c>] task_work_run+0xbc/0xf0
[452744.124832]  [<00000000d5145710>] do_notify_resume+0x88/0x90
[452744.124841]  [<00000000d5978096>] system_call+0xe2/0x2c8
[452744.125319] Last Breaking-Event-Address:
[452744.125321]  [<00000000d5930018>] iucv_path_sever+0x90/0x138
[452744.125324]
[452744.125325] Kernel panic - not syncing: Fatal exception in interrupt

Note that bh_lock_sock() is not serializing the tasklet context against
process context, because the check for sock_owned_by_user() and
corresponding handling is missing.

Ideas for a future clean-up patch:
A) Correct usage of bh_lock_sock() in tasklet context, as described in
Link: https://lore.kernel.org/netdev/1280155406.2899.407.camel@edumazet-laptop/
Re-enqueue, if needed. This may require adding return values to the
tasklet functions and thus changes to all users of iucv.

B) Change iucv tasklet into worker and use only lock_sock() in af_iucv.

Fixes: 7d316b945352 ("af_iucv: remove IUCV-pathes completely")
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Link: https://patch.msgid.link/20240729122818.947756-1-wintera@linux.ibm.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

platform/chrome: cros_ec_proto: Lock device when updating MKBP version

The cros_ec_get_host_command_version_mask() function requires that the
caller must have ec_dev->lock mutex before calling it. This requirement
was not met and as a result it was possible that two commands were sent
to the device at the same time.

The problem was observed while using UART backend which doesn't use any
additional locks, unlike SPI backend which locks the controller until
response is received.

Fixes: f74c7557ed0d ("platform/chrome: cros_ec_proto: Update version on GET_NEXT_EVENT failure")
Cc: stable@vger.kernel.org
Signed-off-by: Patryk Duda <patrykd@google.com>
Link: https://lore.kernel.org/r/20240730104425.607083-1-patrykd@google.com
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>

net/smc: prevent UAF in inet_create()

Following syzbot repro crashes the kernel:

socketpair(0x2, 0x1, 0x100, &(0x7f0000000140)) (fail_nth: 13)

Fix this by not calling sk_common_release() from smc_create_clcsk().

Stack trace:
socket: no more sockets
------------[ cut here ]------------
refcount_t: underflow; use-after-free.
WARNING: CPU: 1 PID: 5092 at lib/refcount.c:28
refcount_warn_saturate+0x15a/0x1d0 lib/refcount.c:28
Modules linked in:
CPU: 1 PID: 5092 Comm: syz-executor424 Not tainted
6.10.0-syzkaller-04483-g0be9ae5486cd #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 06/27/2024
RIP: 0010:refcount_warn_saturate+0x15a/0x1d0 lib/refcount.c:28
Code: 80 f3 1f 8c e8 e7 69 a8 fc 90 0f 0b 90 90 eb 99 e8 cb 4f e6 fc c6
05 8a 8d e8 0a 01 90 48 c7 c7 e0 f3 1f 8c e8 c7 69 a8 fc 90 <0f> 0b 90
90 e9 76 ff ff ff e8 a8 4f e6 fc c6 05 64 8d e8 0a 01 90
RSP: 0018:ffffc900034cfcf0 EFLAGS: 00010246
RAX: 3b9fcde1c862f700 RBX: ffff888022918b80 RCX: ffff88807b39bc00
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: 0000000000000003 R08: ffffffff815878a2 R09: fffffbfff1c39d94
R10: dffffc0000000000 R11: fffffbfff1c39d94 R12: 00000000ffffffe9
R13: 1ffff11004523165 R14: ffff888022918b28 R15: ffff888022918b00
FS:  00005555870e7380(0000) GS:ffff8880b9500000(0000)
knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020000140 CR3: 000000007582e000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
inet_create+0xbaf/0xe70
  __sock_create+0x490/0x920 net/socket.c:1571
  sock_create net/socket.c:1622 [inline]
  __sys_socketpair+0x2ca/0x720 net/socket.c:1769
  __do_sys_socketpair net/socket.c:1822 [inline]
  __se_sys_socketpair net/socket.c:1819 [inline]
  __x64_sys_socketpair+0x9b/0xb0 net/socket.c:1819
  do_syscall_x64 arch/x86/entry/common.c:52 [inline]
  do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fbcb9259669
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 a1 1a 00 00 90 48 89 f8 48 89
f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01
f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fffe931c6d8 EFLAGS: 00000246 ORIG_RAX: 0000000000000035
RAX: ffffffffffffffda RBX: 00007fffe931c6f0 RCX: 00007fbcb9259669
RDX: 0000000000000100 RSI: 0000000000000001 RDI: 0000000000000002
RBP: 0000000000000002 R08: 00007fffe931c476 R09: 00000000000000a0
R10: 0000000020000140 R11: 0000000000000246 R12: 00007fffe931c6ec
R13: 431bde82d7b634db R14: 0000000000000001 R15: 0000000000000001
</TASK>

Link: https://lore.kernel.org/r/20240723175809.537291-1-edumazet@google.com/
Fixes: d25a92ccae6b ("net/smc: Introduce IPPROTO_SMC")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: D. Wythe <alibuda@linux.alibaba.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Link: https://patch.msgid.link/1722224415-30999-1-git-send-email-alibuda@linux.alibaba.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Merge branch 'mptcp-fix-inconsistent-backup-usage'

Matthieu Baerts says:

====================
mptcp: fix inconsistent backup usage

In all the MPTCP backup related tests, the backup flag was set on one
side, and the expected behaviour is to have both sides respecting this
decision. That's also the "natural" way, and what the users seem to
expect.

On the scheduler side, only the 'backup' field was checked, which is
supposed to be set only if the other peer flagged a subflow as backup.
But in various places, this flag was also set when the local host
flagged the subflow as backup, certainly to have the expected behaviour
mentioned above.

Patch 1 modifies the packet scheduler to check if the backup flag has
been set on both directions, not to change its behaviour after having
applied the following patches. That's what the default packet scheduler
should have done since the beginning in v5.7.

Patch 2 fixes the backup flag being mirrored on the MPJ+SYN+ACK by
accident since its introduction in v5.7. Instead, the received and sent
backup flags are properly distinguished in requests.

Patch 3 stops setting the received backup flag as well when sending an
MP_PRIO, something that was done since the MP_PRIO support in v5.12.

Patch 4 adds related and missing MIB counters to be able to easily check
if MP_JOIN are sent with a backup flag. Certainly because these counters
were not there, the behaviour that is fixed by patches here was not
properly verified.

Patch 5 validates the previous patch by extending the MPTCP Join
selftest.

Patch 6 fixes the backup support in signal endpoints: if a signal
endpoint had the backup flag, it was not set in the MPJ+SYN+ACK as
expected. It was only set for ongoing connections, but not future ones
as expected, since the introduction of the backup flag in endpoints in
v5.10.

Patch 7 validates the previous patch by extending the MPTCP Join
selftest as well.

Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
---
Matthieu Baerts (NGI0) (7):
      mptcp: sched: check both directions for backup
      mptcp: distinguish rcv vs sent backup flag in requests
      mptcp: pm: only set request_bkup flag when sending MP_PRIO
      mptcp: mib: count MPJ with backup flag
      selftests: mptcp: join: validate backup in MPJ
      mptcp: pm: fix backup support in signal endpoints
      selftests: mptcp: join: check backup support in signal endp

include/trace/events/mptcp.h                    |  2 +-
net/mptcp/mib.c                                 |  2 +
net/mptcp/mib.h                                 |  2 +
net/mptcp/options.c                             |  2 +-
net/mptcp/pm.c                                  | 12 +++++
net/mptcp/pm_netlink.c                          | 19 ++++++-
net/mptcp/pm_userspace.c                        | 18 +++++++
net/mptcp/protocol.c                            | 10 ++--
net/mptcp/protocol.h                            |  4 ++
net/mptcp/subflow.c                             | 10 ++++
tools/testing/selftests/net/mptcp/mptcp_join.sh | 72 ++++++++++++++++++++-----
11 files changed, 132 insertions(+), 21 deletions(-)
====================

Link: https://patch.msgid.link/20240727-upstream-net-20240727-mptcp-backup-signal-v1-0-f50b31604cf1@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

selftests: mptcp: join: check backup support in signal endp

Before the previous commit, 'signal' endpoints with the 'backup' flag
were ignored when sending the MP_JOIN.

The MPTCP Join selftest has then been modified to validate this case:
the "single address, backup" test, is now validating the MP_JOIN with a
backup flag as it is what we expect it to do with such name. The
previous version has been kept, but renamed to "single address, switch
to backup" to avoid confusions.

The "single address with port, backup" test is also now validating the
MPJ with a backup flag, which makes more sense than checking the switch
to backup with an MP_PRIO.

The "mpc backup both sides" test is now validating that the backup flag
is also set in MP_JOIN from and to the addresses used in the initial
subflow, using the special ID 0.

The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.

Fixes: 4596a2c1b7f5 ("mptcp: allow creating non-backup subflows")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

mptcp: pm: fix backup support in signal endpoints

There was a support for signal endpoints, but only when the endpoint's
flag was changed during a connection. If an endpoint with the signal and
backup was already present, the MP_JOIN reply was not containing the
backup flag as expected.

That's confusing to have this inconsistent behaviour. On the other hand,
the infrastructure to set the backup flag in the SYN + ACK + MP_JOIN was
already there, it was just never set before. Now when requesting the
local ID from the path-manager, the backup status is also requested.

Note that when the userspace PM is used, the backup flag can be set if
the local address was already used before with a backup flag, e.g. if
the address was announced with the 'backup' flag, or a subflow was
created with the 'backup' flag.

Fixes: 4596a2c1b7f5 ("mptcp: allow creating non-backup subflows")
Cc: stable@vger.kernel.org
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/507
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

selftests: mptcp: join: validate backup in MPJ

A peer can notify the other one that a subflow has to be treated as
"backup" by two different ways: either by sending a dedicated MP_PRIO
notification, or by setting the backup flag in the MP_JOIN handshake.

The selftests were previously monitoring the former, but not the latter.
This is what is now done here by looking at these new MIB counters when
validating the 'backup' cases:

MPTcpExtMPJoinSynBackupRx
MPTcpExtMPJoinSynAckBackupRx

The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it will help to validate a new fix for an issue introduced by this
commit ID.

Fixes: 4596a2c1b7f5 ("mptcp: allow creating non-backup subflows")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

mptcp: mib: count MPJ with backup flag

Without such counters, it is difficult to easily debug issues with MPJ
not having the backup flags on production servers.

This is not strictly a fix, but it eases to validate the following
patches without requiring to take packet traces, to query ongoing
connections with Netlink with admin permissions, or to guess by looking
at the behaviour of the packet scheduler. Also, the modification is self
contained, isolated, well controlled, and the increments are done just
after others, there from the beginning. It looks then safe, and helpful
to backport this.

Fixes: 4596a2c1b7f5 ("mptcp: allow creating non-backup subflows")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

mptcp: pm: only set request_bkup flag when sending MP_PRIO

The 'backup' flag from mptcp_subflow_context structure is supposed to be
set only when the other peer flagged a subflow as backup, not the
opposite.

Fixes: 067065422fcd ("mptcp: add the outgoing MP_PRIO support")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

mptcp: distinguish rcv vs sent backup flag in requests

When sending an MP_JOIN + SYN + ACK, it is possible to mark the subflow
as 'backup' by setting the flag with the same name. Before this patch,
the backup was set if the other peer set it in its MP_JOIN + SYN
request.

It is not correct: the backup flag should be set in the MPJ+SYN+ACK only
if the host asks for it, and not mirroring what was done by the other
peer. It is then required to have a dedicated bit for each direction,
similar to what is done in the subflow context.

Fixes: f296234c98a8 ("mptcp: Add handling of incoming MP_JOIN requests")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

mptcp: sched: check both directions for backup

The 'mptcp_subflow_context' structure has two items related to the
backup flags:

- 'backup': the subflow has been marked as backup by the other peer

- 'request_bkup': the backup flag has been set by the host

Before this patch, the scheduler was only looking at the 'backup' flag.
That can make sense in some cases, but it looks like that's not what we
wanted for the general use, because either the path-manager was setting
both of them when sending an MP_PRIO, or the receiver was duplicating
the 'backup' flag in the subflow request.

Note that the use of these two flags in the path-manager are going to be
fixed in the next commits, but this change here is needed not to modify
the behaviour.

Fixes: f296234c98a8 ("mptcp: Add handling of incoming MP_JOIN requests")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

profiling: remove stale percpu flip buffer variables

For some reason I didn't see this issue on my arm64 or x86-64 builds,
but Stephen Rothwell reports that commit 2accfdb7eff6 ("profiling:
attempt to remove per-cpu profile flip buffer") left these static
variables around, and the powerpc build is unhappy about them:

  kernel/profile.c:52:28: warning: 'cpu_profile_flip' defined but not used [-Wunused-variable]
     52 | static DEFINE_PER_CPU(int, cpu_profile_flip);
        |                            ^~~~~~~~~~~~~~~~
  ..

So remove these stale left-over remnants too.

Fixes: 2accfdb7eff6 ("profiling: attempt to remove per-cpu profile flip buffer")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

selftests/bpf: Filter out _GNU_SOURCE when compiling test_cpp

Jakub reports build failures when merging linux/master with net tree:

CXX      test_cpp
In file included from <built-in>:454:
<command line>:2:9: error: '_GNU_SOURCE' macro redefined [-Werror,-Wmacro-redefined]
    2 | #define _GNU_SOURCE
      |         ^
<built-in>:445:9: note: previous definition is here
  445 | #define _GNU_SOURCE 1

The culprit is commit cc937dad85ae ("selftests: centralize -D_GNU_SOURCE= to
CFLAGS in lib.mk") which unconditionally added -D_GNU_SOUCE to CLFAGS.
Apparently clang++ also unconditionally adds it for the C++ targets [0]
which causes a conflict. Add small change in the selftests makefile
to filter it out for test_cpp.

Not sure which tree it should go via, targeting bpf for now, but net
might be better?

0: https://stackoverflow.com/questions/11670581/why-is-gnu-source-defined-by-default-and-how-to-turn-it-off

Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20240725214029.1760809-1-sdf@fomichev.me

Merge tag 'for-linus-2024072901' of git://git./linux/kernel/git/hid/hid

Pull HID fixes from Benjamin Tissoires:

- fixes for HID-BPF after the merge with the bpf tree (Arnd Bergmann
   and Benjamin Tissoires)

- some tool type fix for the Wacom driver (Tatsunosuke Tobita)

- a reorder of the sensor discovery to ensure the HID AMD SFH is
   removed when no sensors are available (Basavaraj Natikar)

* tag 'for-linus-2024072901' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  selftests/hid: add test for attaching multiple time the same struct_ops
  HID: bpf: prevent the same struct_ops to be attached more than once
  selftests/hid: disable struct_ops auto-attach
  selftests/hid: fix bpf_wq new API
  HID: amd_sfh: Move sensor discovery before HID device initialization
  hid: bpf: add BPF_JIT dependency
  HID: wacom: more appropriate tool type categorization
  HID: wacom: Modify pen IDs

Merge tag 'for_linus' of git://git./linux/kernel/git/mst/vhost

Pull virtio fixes from Michael Tsirkin:
"The biggest thing here is the adminq change - but it looks like the
  only way to avoid headq blocking causing indefinite stalls.

  This fixes three issues:

   - Prevent admin commands on one VF blocking another.

     This prevents a bad VF from blocking a good one, as well as fixing
     a scalability issue with large # of VFs

   - Correctly return error on command failure on octeon. We used to
     treat failed commands as a success.

   - Fix modpost warning when building virtio_dma_buf. Harmless, but the
     fix is trivial"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  virtio_pci_modern: remove admin queue serialization lock
  virtio_pci_modern: use completion instead of busy loop to wait on admin cmd result
  virtio_pci_modern: pass cmd as an identification token
  virtio_pci_modern: create admin queue of queried size
  virtio: create admin queues alongside other virtqueues
  virtio_pci: pass vq info as an argument to vp_setup_vq()
  virtio: push out code to vp_avq_index()
  virtio_pci_modern: treat vp_dev->admin_vq.info.vq pointer as static
  virtio_pci: introduce vector allocation fallback for slow path virtqueues
  virtio_pci: pass vector policy enum to vp_find_one_vq_msix()
  virtio_pci: pass vector policy enum to vp_find_vqs_msix()
  virtio_pci: simplify vp_request_msix_vectors() call a bit
  virtio_pci: push out single vq find code to vp_find_one_vq_msix()
  vdpa/octeon_ep: Fix error code in octep_process_mbox()
  virtio: add missing MODULE_DESCRIPTION() macro

task_work: make TWA_NMI_CURRENT handling conditional on IRQ_WORK

The TWA_NMI_CURRENT handling very much depends on IRQ_WORK, but that
isn't universally enabled everywhere.

Maybe the IRQ_WORK infrastructure should just be unconditional - x86
ends up indirectly enabling it through unconditionally enabling
PERF_EVENTS, for example. But it also gets enabled by having SMP
support, or even if you just have PRINTK enabled.

But in the meantime TWA_NMI_CURRENT causes tons of build failures on
various odd minimal configs. Which did show up in linux-next, but
despite that nobody bothered to fix it or even inform me until -rc1 was
out.

Fixes: 466e4d801cd4 ("task_work: Add TWA_NMI_CURRENT as an additional notify mode")
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Reported-by: kernelci.org bot <bot@kernelci.org>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

profiling: attempt to remove per-cpu profile flip buffer

This is the really old legacy kernel profiling code, which has long
since been obviated by "real profiling" (ie 'prof' and company), and
mainly remains as a source of syzbot reports.

There are anecdotal reports that people still use it for boot-time
profiling, but it's unlikely that such use would care about the old NUMA
optimizations in this code from 2004 (commit ad02973d42: "profile: 512x
Altix timer interrupt livelock fix" in the BK import archive at [1])

So in order to head off future syzbot reports, let's try to simplify
this code and get rid of the per-cpu profile buffers that are quite a
large portion of the complexity footprint of this thing (including CPU
hotplug callbacks etc).

It's unlikely anybody will actually notice, or possibly, as Thomas put
it: "Only people who indulge in nostalgia will notice :)".

That said, if it turns out that this code is actually actively used by
somebody, we can always revert this removal.  Thus the "attempt" in the
summary line.

[ Note: in a small nod to "the profiling code can cause NUMA problems",
  this also removes the "increment the last entry in the profiling array
  on any unknown hits" logic. That would account any program counter in
  a module to that single counter location, and might exacerbate any
  NUMA cacheline bouncing issues ]

Link: https://lore.kernel.org/all/CAHk-=wgs52BxT4Zjmjz8aNvHWKxf5_ThBY4bYL1Y6CTaNL2dTw@mail.gmail.com/
Link:  https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git [1]
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

profiling: remove prof_cpu_mask

syzbot is reporting uninit-value at profile_hits(), for there is a race
window between

  if (!alloc_cpumask_var(&prof_cpu_mask, GFP_KERNEL))
    return -ENOMEM;
  cpumask_copy(prof_cpu_mask, cpu_possible_mask);

in profile_init() and

  cpumask_available(prof_cpu_mask) &&
  cpumask_test_cpu(smp_processor_id(), prof_cpu_mask))

in profile_tick(); prof_cpu_mask remains uninitialzed until cpumask_copy()
completes while cpumask_available(prof_cpu_mask) returns true as soon as
alloc_cpumask_var(&prof_cpu_mask) completes.

We could replace alloc_cpumask_var() with zalloc_cpumask_var() and
call cpumask_copy() from create_proc_profile() on only UP kernels, for
profile_online_cpu() calls cpumask_set_cpu() as needed via
cpuhp_setup_state(CPUHP_AP_ONLINE_DYN) on SMP kernels. But this patch
removes prof_cpu_mask because it seems unnecessary.

The cpumask_test_cpu(smp_processor_id(), prof_cpu_mask) test
in profile_tick() is likely always true due to

  a CPU cannot call profile_tick() if that CPU is offline

and

  cpumask_set_cpu(cpu, prof_cpu_mask) is called when that CPU becomes
  online and cpumask_clear_cpu(cpu, prof_cpu_mask) is called when that
  CPU becomes offline

. This test could be false during transition between online and offline.

But according to include/linux/cpuhotplug.h , CPUHP_PROFILE_PREPARE
belongs to PREPARE section, which means that the CPU subjected to
profile_dead_cpu() cannot be inside profile_tick() (i.e. no risk of
use-after-free bug) because interrupt for that CPU is disabled during
PREPARE section. Therefore, this test is guaranteed to be true, and
can be removed. (Since profile_hits() checks prof_buffer != NULL, we
don't need to check prof_buffer != NULL here unless get_irq_regs() or
user_mode() is such slow that we want to avoid when prof_buffer == NULL).

do_profile_hits() is called from profile_tick() from timer interrupt
only if cpumask_test_cpu(smp_processor_id(), prof_cpu_mask) is true and
prof_buffer is not NULL. But syzbot is also reporting that sometimes
do_profile_hits() is called while current thread is still doing vzalloc(),
where prof_buffer must be NULL at this moment. This indicates that multiple
threads concurrently tried to write to /sys/kernel/profiling interface,
which caused that somebody else try to re-allocate prof_buffer despite
somebody has already allocated prof_buffer. Fix this by using
serialization.

Reported-by: syzbot <syzbot+b1a83ab2a9eb9321fbdd@syzkaller.appspotmail.com>
Closes: https://syzkaller.appspot.com/bug?extid=b1a83ab2a9eb9321fbdd
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Tested-by: syzbot <syzbot+b1a83ab2a9eb9321fbdd@syzkaller.appspotmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Input: MT - limit max slots

syzbot is reporting too large allocation at input_mt_init_slots(), for
num_slots is supplied from userspace using ioctl(UI_DEV_CREATE).

Since nobody knows possible max slots, this patch chose 1024.

Reported-by: syzbot <syzbot+0122fa359a69694395d5@syzkaller.appspotmail.com>
Closes: https://syzkaller.appspot.com/bug?extid=0122fa359a69694395d5
Suggested-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'for-linus' of git://git./linux/kernel/git/rmk/linux

Pull ARM updates from Russell King:

- ftrace: don't assume stack frames are contiguous in memory

- remove unused mod_inwind_map structure

- spelling fixes

- allow use of LD dead code/data elimination

- fix callchain_trace() return value

- add support for stackleak gcc plugin

- correct some reset asm function prototypes for CFI

[ Missed the merge window because Russell forgot to push out ]

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux:
  ARM: 9408/1: mm: CFI: Fix some erroneous reset prototypes
  ARM: 9407/1: Add support for STACKLEAK gcc plugin
  ARM: 9406/1: Fix callchain_trace() return value
  ARM: 9404/1: arm32: enable HAVE_LD_DEAD_CODE_DATA_ELIMINATION
  ARM: 9403/1: Alpine: Spelling s/initialiing/initializing/
  ARM: 9402/1: Kconfig: Spelling s/Cortex A-/Cortex-A/
  ARM: 9400/1: Remove unused struct 'mod_unwind_map'

btrfs: fix corruption after buffer fault in during direct IO append write

During an append (O_APPEND write flag) direct IO write if the input buffer
was not previously faulted in, we can corrupt the file in a way that the
final size is unexpected and it includes an unexpected hole.

The problem happens like this:

1) We have an empty file, with size 0, for example;

2) We do an O_APPEND direct IO with a length of 4096 bytes and the input
   buffer is not currently faulted in;

3) We enter btrfs_direct_write(), lock the inode and call
   generic_write_checks(), which calls generic_write_checks_count(), and
   that function sets the iocb position to 0 with the following code:

if (iocb->ki_flags & IOCB_APPEND)
iocb->ki_pos = i_size_read(inode);

4) We call btrfs_dio_write() and enter into iomap, which will end up
   calling btrfs_dio_iomap_begin() and that calls
   btrfs_get_blocks_direct_write(), where we update the i_size of the
   inode to 4096 bytes;

5) After btrfs_dio_iomap_begin() returns, iomap will attempt to access
   the page of the write input buffer (at iomap_dio_bio_iter(), with a
   call to bio_iov_iter_get_pages()) and fail with -EFAULT, which gets
   returned to btrfs at btrfs_direct_write() via btrfs_dio_write();

6) At btrfs_direct_write() we get the -EFAULT error, unlock the inode,
   fault in the write buffer and then goto to the label 'relock';

7) We lock again the inode, do all the necessary checks again and call
   again generic_write_checks(), which calls generic_write_checks_count()
   again, and there we set the iocb's position to 4K, which is the current
   i_size of the inode, with the following code pointed above:

        if (iocb->ki_flags & IOCB_APPEND)
                iocb->ki_pos = i_size_read(inode);

8) Then we go again to btrfs_dio_write() and enter iomap and the write
   succeeds, but it wrote to the file range [4K, 8K), leaving a hole in
   the [0, 4K) range and an i_size of 8K, which goes against the
   expectations of having the data written to the range [0, 4K) and get an
   i_size of 4K.

Fix this by not unlocking the inode before faulting in the input buffer,
in case we get -EFAULT or an incomplete write, and not jumping to the
'relock' label after faulting in the buffer - instead jump to a location
immediately before calling iomap, skipping all the write checks and
relocking. This solves this problem and it's fine even in case the input
buffer is memory mapped to the same file range, since only holding the
range locked in the inode's io tree can cause a deadlock, it's safe to
keep the inode lock (VFS lock), as was fixed and described in commit
51bd9563b678 ("btrfs: fix deadlock due to page faults during direct IO
reads and writes").

A sample reproducer provided by a reporter is the following:

   $ cat test.c
   #ifndef _GNU_SOURCE
   #define _GNU_SOURCE
   #endif

   #include <fcntl.h>
   #include <stdio.h>
   #include <sys/mman.h>
   #include <sys/stat.h>
   #include <unistd.h>

   int main(int argc, char *argv[])
   {
       if (argc < 2) {
           fprintf(stderr, "Usage: %s <test file>\n", argv[0]);
           return 1;
       }

       int fd = open(argv[1], O_WRONLY | O_CREAT | O_TRUNC | O_DIRECT |
                     O_APPEND, 0644);
       if (fd < 0) {
           perror("creating test file");
           return 1;
       }

       char *buf = mmap(NULL, 4096, PROT_READ,
                        MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
       ssize_t ret = write(fd, buf, 4096);
       if (ret < 0) {
           perror("pwritev2");
           return 1;
       }

       struct stat stbuf;
       ret = fstat(fd, &stbuf);
       if (ret < 0) {
           perror("stat");
           return 1;
       }

       printf("size: %llu\n", (unsigned long long)stbuf.st_size);
       return stbuf.st_size == 4096 ? 0 : 1;
   }

A test case for fstests will be sent soon.

Reported-by: Hanna Czenczek <hreitz@redhat.com>
Link: https://lore.kernel.org/linux-btrfs/0b841d46-12fe-4e64-9abb-871d8d0de271@redhat.com/
Fixes: 8184620ae212 ("btrfs: fix lost file sync on direct IO write with nowait and dsync iocb")
CC: stable@vger.kernel.org # 6.1+
Tested-by: Hanna Czenczek <hreitz@redhat.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: zoned: fix zone_unusable accounting on making block group read-write again

When btrfs makes a block group read-only, it adds all free regions in the
block group to space_info->bytes_readonly. That free space excludes
reserved and pinned regions. OTOH, when btrfs makes the block group
read-write again, it moves all the unused regions into the block group's
zone_unusable. That unused region includes reserved and pinned regions.
As a result, it counts too much zone_unusable bytes.

Fortunately (or unfortunately), having erroneous zone_unusable does not
affect the calculation of space_info->bytes_readonly, because free
space (num_bytes in btrfs_dec_block_group_ro) calculation is done based on
the erroneous zone_unusable and it reduces the num_bytes just to cancel the
error.

This behavior can be easily discovered by adding a WARN_ON to check e.g,
"bg->pinned > 0" in btrfs_dec_block_group_ro(), and running fstests test
case like btrfs/282.

Fix it by properly considering pinned and reserved in
btrfs_dec_block_group_ro(). Also, add a WARN_ON and introduce
btrfs_space_info_update_bytes_zone_unusable() to catch a similar mistake.

Fixes: 169e0da91a21 ("btrfs: zoned: track unusable bytes for zones")
CC: stable@vger.kernel.org # 5.15+
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: do not subtract delalloc from avail bytes

The block group's avail bytes printed when dumping a space info subtract
the delalloc_bytes. However, as shown in btrfs_add_reserved_bytes() and
btrfs_free_reserved_bytes(), it is added or subtracted along with
"reserved" for the delalloc case, which means the "delalloc_bytes" is a
part of the "reserved" bytes. So, excluding it to calculate the avail space
counts delalloc_bytes twice, which can lead to an invalid result.

Fixes: e50b122b832b ("btrfs: print available space for a block group when dumping a space info")
CC: stable@vger.kernel.org # 6.6+
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: make cow_file_range_inline() honor locked_page on error

The btrfs buffered write path runs through __extent_writepage() which
has some tricky return value handling for writepage_delalloc().
Specifically, when that returns 1, we exit, but for other return values
we continue and end up calling btrfs_folio_end_all_writers(). If the
folio has been unlocked (note that we check the PageLocked bit at the
start of __extent_writepage()), this results in an assert panic like
this one from syzbot:

  BTRFS: error (device loop0 state EAL) in free_log_tree:3267: errno=-5 IO failure
  BTRFS warning (device loop0 state EAL): Skipping commit of aborted transaction.
  BTRFS: error (device loop0 state EAL) in cleanup_transaction:2018: errno=-5 IO failure
  assertion failed: folio_test_locked(folio), in fs/btrfs/subpage.c:871
  ------------[ cut here ]------------
  kernel BUG at fs/btrfs/subpage.c:871!
  Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
  CPU: 1 PID: 5090 Comm: syz-executor225 Not tainted
  6.10.0-syzkaller-05505-gb1bc554e009e #0
  Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
  Google 06/27/2024
  RIP: 0010:btrfs_folio_end_all_writers+0x55b/0x610 fs/btrfs/subpage.c:871
  Code: e9 d3 fb ff ff e8 25 22 c2 fd 48 c7 c7 c0 3c 0e 8c 48 c7 c6 80 3d
  0e 8c 48 c7 c2 60 3c 0e 8c b9 67 03 00 00 e8 66 47 ad 07 90 <0f> 0b e8
  6e 45 b0 07 4c 89 ff be 08 00 00 00 e8 21 12 25 fe 4c 89
  RSP: 0018:ffffc900033d72e0 EFLAGS: 00010246
  RAX: 0000000000000045 RBX: 00fff0000000402c RCX: 663b7a08c50a0a00
  RDX: 0000000000000000 RSI: 0000000080000000 RDI: 0000000000000000
  RBP: ffffc900033d73b0 R08: ffffffff8176b98c R09: 1ffff9200067adfc
  R10: dffffc0000000000 R11: fffff5200067adfd R12: 0000000000000001
  R13: dffffc0000000000 R14: 0000000000000000 R15: ffffea0001cbee80
  FS:  0000000000000000(0000) GS:ffff8880b9500000(0000)
  knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00007f5f076012f8 CR3: 000000000e134000 CR4: 00000000003506f0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  Call Trace:
  <TASK>
  __extent_writepage fs/btrfs/extent_io.c:1597 [inline]
  extent_write_cache_pages fs/btrfs/extent_io.c:2251 [inline]
  btrfs_writepages+0x14d7/0x2760 fs/btrfs/extent_io.c:2373
  do_writepages+0x359/0x870 mm/page-writeback.c:2656
  filemap_fdatawrite_wbc+0x125/0x180 mm/filemap.c:397
  __filemap_fdatawrite_range mm/filemap.c:430 [inline]
  __filemap_fdatawrite mm/filemap.c:436 [inline]
  filemap_flush+0xdf/0x130 mm/filemap.c:463
  btrfs_release_file+0x117/0x130 fs/btrfs/file.c:1547
  __fput+0x24a/0x8a0 fs/file_table.c:422
  task_work_run+0x24f/0x310 kernel/task_work.c:222
  exit_task_work include/linux/task_work.h:40 [inline]
  do_exit+0xa2f/0x27f0 kernel/exit.c:877
  do_group_exit+0x207/0x2c0 kernel/exit.c:1026
  __do_sys_exit_group kernel/exit.c:1037 [inline]
  __se_sys_exit_group kernel/exit.c:1035 [inline]
  __x64_sys_exit_group+0x3f/0x40 kernel/exit.c:1035
  x64_sys_call+0x2634/0x2640
  arch/x86/include/generated/asm/syscalls_64.h:232
  do_syscall_x64 arch/x86/entry/common.c:52 [inline]
  do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
  entry_SYSCALL_64_after_hwframe+0x77/0x7f
  RIP: 0033:0x7f5f075b70c9
  Code: Unable to access opcode bytes at
  0x7f5f075b709f.

I was hitting the same issue by doing hundreds of accelerated runs of
generic/475, which also hits IO errors by design.

I instrumented that reproducer with bpftrace and found that the
undesirable folio_unlock was coming from the following callstack:

  folio_unlock+5
  __process_pages_contig+475
  cow_file_range_inline.constprop.0+230
  cow_file_range+803
  btrfs_run_delalloc_range+566
  writepage_delalloc+332
  __extent_writepage # inlined in my stacktrace, but I added it here
  extent_write_cache_pages+622

Looking at the bisected-to patch in the syzbot report, Josef realized
that the logic of the cow_file_range_inline error path subtly changing.
In the past, on error, it jumped to out_unlock in cow_file_range(),
which honors the locked_page, so when we ultimately call
folio_end_all_writers(), the folio of interest is still locked. After
the change, we always unlocked ignoring the locked_page, on both success
and error. On the success path, this all results in returning 1 to
__extent_writepage(), which skips the folio_end_all_writers() call,
which makes it OK to have unlocked.

Fix the bug by wiring the locked_page into cow_file_range_inline() and
only setting locked_page to NULL on success.

Reported-by: syzbot+a14d8ac9af3a2a4fd0c8@syzkaller.appspotmail.com
Fixes: 0586d0a89e77 ("btrfs: move extent bit and page cleanup into cow_file_range_inline")
CC: stable@vger.kernel.org # 6.10+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>

ice: xsk: fix txq interrupt mapping

ice_cfg_txq_interrupt() internally handles XDP Tx ring. Do not use
ice_for_each_tx_ring() in ice_qvec_cfg_msix() as this causing us to
treat XDP ring that belongs to queue vector as Tx ring and therefore
misconfiguring the interrupts.

Fixes: 2d4238f55697 ("ice: Add support for AF_XDP")
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

ice: add missing WRITE_ONCE when clearing ice_rx_ring::xdp_prog

It is read by data path and modified from process context on remote cpu
so it is needed to use WRITE_ONCE to clear the pointer.

Fixes: efc2214b6047 ("ice: Add support for XDP")
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

ice: improve updating ice_{t,r}x_ring::xsk_pool

xsk_buff_pool pointers that ice ring structs hold are updated via
ndo_bpf that is executed in process context while it can be read by
remote CPU at the same time within NAPI poll. Use synchronize_net()
after pointer update and {READ,WRITE}_ONCE() when working with mentioned
pointer.

Fixes: 2d4238f55697 ("ice: Add support for AF_XDP")
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

ice: toggle netif_carrier when setting up XSK pool

This so we prevent Tx timeout issues. One of conditions checked on
running in the background dev_watchdog() is netif_carrier_ok(), so let
us turn it off when we disable the queues that belong to a q_vector
where XSK pool is being configured. Turn carrier on in ice_qp_ena()
only when ice_get_link_status() tells us that physical link is up.

Fixes: 2d4238f55697 ("ice: Add support for AF_XDP")
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

ice: modify error handling when setting XSK pool in ndo_bpf

Don't bail out right when spotting an error within ice_qp_{dis,ena}()
but rather track error and go through whole flow of disabling and
enabling queue pair.

Fixes: 2d4238f55697 ("ice: Add support for AF_XDP")
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

ice: replace synchronize_rcu with synchronize_net

Given that ice_qp_dis() is called under rtnl_lock, synchronize_net() can
be called instead of synchronize_rcu() so that XDP rings can finish its
job in a faster way. Also let us do this as earlier in XSK queue disable
flow.

Additionally, turn off regular Tx queue before disabling irqs and NAPI.

Fixes: 2d4238f55697 ("ice: Add support for AF_XDP")
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

ice: don't busy wait for Rx queue disable in ice_qp_dis()

When ice driver is spammed with multiple xdpsock instances and flow
control is enabled, there are cases when Rx queue gets stuck and unable
to reflect the disable state in QRX_CTRL register. Similar issue has
previously been addressed in commit 13a6233b033f ("ice: Add support to
enable/disable all Rx queues before waiting").

To workaround this, let us simply not wait for a disabled state as later
patch will make sure that regardless of the encountered error in the
process of disabling a queue pair, the Rx queue will be enabled.

Fixes: 2d4238f55697 ("ice: Add support for AF_XDP")
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>