git.kernel.dk Git - linux-block.git/log

Merge tag 'wireless-2025-06-12' of https://git./linux/kernel/git/wireless/wireless

Johannes Berg says:

====================
Another quick round of updates:

- revert mwifiex HT40 that was causing issues
- many ath10k/ath11k/ath12k fixes
- re-add some iwlwifi code I lost in a merge
- use kfree_sensitive() on an error path in cfg80211

* tag 'wireless-2025-06-12' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
  wifi: cfg80211: use kfree_sensitive() for connkeys cleanup
  wifi: iwlwifi: fix merge damage related to iwl_pci_resume
  Revert "wifi: mwifiex: Fix HT40 bandwidth issue."
  wifi: ath12k: fix uaf in ath12k_core_init()
  wifi: ath12k: Fix hal_reo_cmd_status kernel-doc
  wifi: ath12k: fix GCC_GCC_PCIE_HOT_RST definition for WCN7850
  wifi: ath11k: validate ath11k_crypto_mode on top of ath11k_core_qmi_firmware_ready
  wifi: ath11k: consistently use ath11k_mac_get_fw_stats()
  wifi: ath11k: move locking outside of ath11k_mac_get_fw_stats()
  wifi: ath11k: adjust unlock sequence in ath11k_update_stats_event()
  wifi: ath11k: move some firmware stats related functions outside of debugfs
  wifi: ath11k: don't wait when there is no vdev started
  wifi: ath11k: don't use static variables in ath11k_debugfs_fw_stats_process()
  wifi: ath11k: avoid burning CPU in ath11k_debugfs_fw_stats_request()
  wil6210: fix support for sparrow chipsets
  wifi: ath10k: Avoid vdev delete timeout when firmware is already down
  ath10k: snoc: fix unbalanced IRQ enable in crash recovery
====================

Link: https://patch.msgid.link/20250612082519.11447-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'fix-ntuple-rules-targeting-default-rss'

Gal Pressman says:

====================
Fix ntuple rules targeting default RSS

This series addresses a regression in ethtool flow steering where rules
targeting the default RSS context (context 0) were incorrectly rejected.

The default RSS context always exists but is not stored in the rss_ctx
xarray like additional contexts. The current validation logic was
checking for the existence of context 0 in this array, causing valid
flow steering rules to be rejected.

This prevented configurations such as:
- High priority rules directing specific traffic to the default context
- Low priority catch-all rules directing remaining traffic to additional
contexts

Patch 1 fixes the validation logic to skip the existence check for
context 0.

Patch 2 adds a selftest that verifies this behavior.

v3: https://lore.kernel.org/20250609120250.1630125-1-gal@nvidia.com
v2: https://lore.kernel.org/20250225071348.509432-1-gal@nvidia.com
====================

Link: https://patch.msgid.link/20250612071958.1696361-1-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: drv-net: rss_ctx: Add test for ntuple rules targeting default RSS context

Add test_rss_default_context_rule() to verify that ntuple rules can
correctly direct traffic to the default RSS context (context 0).

The test creates two ntuple rules with explicit location priorities:
- A high-priority rule (loc 0) directing specific port traffic to
  context 0.
- A low-priority rule (loc 1) directing all other TCP traffic to context
  1.

This validates that:
1. Rules targeting the default context function properly.
2. Traffic steering works as expected when mixing default and
   additional RSS contexts.

The test was written by AI, and reviewed by humans.

Reviewed-by: Nimrod Oren <noren@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20250612071958.1696361-3-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: ethtool: Don't check if RSS context exists in case of context 0

Context 0 (default context) always exists, there is no need to check
whether it exists or not when adding a flow steering rule.

The existing check fails when creating a flow steering rule for context
0 as it is not stored in the rss_ctx xarray.

For example:
$ ethtool --config-ntuple eth2 flow-type tcp4 dst-ip 194.237.147.23 dst-port 19983 context 0 loc 618
rmgr: Cannot insert RX class rule: Invalid argument
Cannot insert classification rule

An example usecase for this could be:
- A high-priority rule (loc 0) directing specific port traffic to
context 0.
- A low-priority rule (loc 1) directing all other TCP traffic to context
1.

This is a user-visible regression that was caught in our testing
environment, it was not reported by a user yet.

Fixes: de7f7582dff2 ("net: ethtool: prevent flow steering to RSS contexts which don't exist")
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://patch.msgid.link/20250612071958.1696361-2-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'for-net-2025-06-11' of git://git./linux/kernel/git/bluetooth/bluetooth

Luiz Augusto von Dentz says:

====================
bluetooth pull request for net:

- eir: Fix NULL pointer deference on eir_get_service_data
- eir: Fix possible crashes on eir_create_adv_data
- hci_sync: Fix broadcast/PA when using an existing instance
- ISO: Fix using BT_SK_PA_SYNC to detect BIS sockets
- ISO: Fix not using bc_sid as advertisement SID
- MGMT: Fix sparse errors

* tag 'for-net-2025-06-11' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
  Bluetooth: MGMT: Fix sparse errors
  Bluetooth: ISO: Fix not using bc_sid as advertisement SID
  Bluetooth: ISO: Fix using BT_SK_PA_SYNC to detect BIS sockets
  Bluetooth: eir: Fix possible crashes on eir_create_adv_data
  Bluetooth: hci_sync: Fix broadcast/PA when using an existing instance
  Bluetooth: Fix NULL pointer deference on eir_get_service_data
====================

Link: https://patch.msgid.link/20250611204944.1559356-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

af_unix: Allow passing cred for embryo without SO_PASSCRED/SO_PASSPIDFD.

Before the cited commit, the kernel unconditionally embedded SCM
credentials to skb for embryo sockets even when both the sender
and listener disabled SO_PASSCRED and SO_PASSPIDFD.

Now, the credentials are added to skb only when configured by the
sender or the listener.

However, as reported in the link below, it caused a regression for
some programs that assume credentials are included in every skb,
but sometimes not now.

The only problematic scenario would be that a socket starts listening
before setting the option.  Then, there will be 2 types of non-small
race window, where a client can send skb without credentials, which
the peer receives as an "invalid" message (and aborts the connection
it seems ?):

  Client                    Server
  ------                    ------
                            s1.listen()  <-- No SO_PASS{CRED,PIDFD}
  s2.connect()
  s2.send()  <-- w/o cred
                            s1.setsockopt(SO_PASS{CRED,PIDFD})
  s2.send()  <-- w/  cred

or

  Client                    Server
  ------                    ------
                            s1.listen()  <-- No SO_PASS{CRED,PIDFD}
  s2.connect()
  s2.send()  <-- w/o cred
                            s3, _ = s1.accept()  <-- Inherit cred options
  s2.send()  <-- w/o cred                            but not set yet

                            s3.setsockopt(SO_PASS{CRED,PIDFD})
  s2.send()  <-- w/  cred

It's unfortunate that buggy programs depend on the behaviour,
but let's restore the previous behaviour.

Fixes: 3f84d577b79d ("af_unix: Inherit sk_flags at connect().")
Reported-by: Jacek Łuczak <difrost.kernel@gmail.com>
Closes: https://lore.kernel.org/all/68d38b0b-1666-4974-85d4-15575789c8d4@gmail.com/
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Tested-by: Christian Heusel <christian@heusel.eu>
Tested-by: André Almeida <andrealmeid@igalia.com>
Tested-by: Jacek Łuczak <difrost.kernel@gmail.com>
Link: https://patch.msgid.link/20250611202758.3075858-1-kuni1840@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ipv6: Move fib6_config_validate() to ip6_route_add().

syzkaller created an IPv6 route from a malformed packet, which has
a prefix len > 128, triggering the splat below. [0]

This is a similar issue fixed by commit 586ceac9acb7 ("ipv6: Restore
fib6_config validation for SIOCADDRT.").

The cited commit removed fib6_config validation from some callers
of ip6_add_route().

Let's move the validation back to ip6_route_add() and
ip6_route_multipath_add().

[0]:
UBSAN: array-index-out-of-bounds in ./include/net/ipv6.h:616:34
index 20 is out of range for type '__u8 [16]'
CPU: 1 UID: 0 PID: 7444 Comm: syz.0.708 Not tainted 6.16.0-rc1-syzkaller-g19272b37aa4f #0 PREEMPT
Hardware name: riscv-virtio,qemu (DT)
Call Trace:
[<ffffffff80078a80>] dump_backtrace+0x2e/0x3c arch/riscv/kernel/stacktrace.c:132
[<ffffffff8000327a>] show_stack+0x30/0x3c arch/riscv/kernel/stacktrace.c:138
[<ffffffff80061012>] __dump_stack lib/dump_stack.c:94 [inline]
[<ffffffff80061012>] dump_stack_lvl+0x12e/0x1a6 lib/dump_stack.c:120
[<ffffffff800610a6>] dump_stack+0x1c/0x24 lib/dump_stack.c:129
[<ffffffff8001c0ea>] ubsan_epilogue+0x14/0x46 lib/ubsan.c:233
[<ffffffff819ba290>] __ubsan_handle_out_of_bounds+0xf6/0xf8 lib/ubsan.c:455
[<ffffffff85b363a4>] ipv6_addr_prefix include/net/ipv6.h:616 [inline]
[<ffffffff85b363a4>] ip6_route_info_create+0x8f8/0x96e net/ipv6/route.c:3793
[<ffffffff85b635da>] ip6_route_add+0x2a/0x1aa net/ipv6/route.c:3889
[<ffffffff85b02e08>] addrconf_prefix_route+0x2c4/0x4e8 net/ipv6/addrconf.c:2487
[<ffffffff85b23bb2>] addrconf_prefix_rcv+0x1720/0x1e62 net/ipv6/addrconf.c:2878
[<ffffffff85b92664>] ndisc_router_discovery+0x1a06/0x3504 net/ipv6/ndisc.c:1570
[<ffffffff85b99038>] ndisc_rcv+0x500/0x600 net/ipv6/ndisc.c:1874
[<ffffffff85bc2c18>] icmpv6_rcv+0x145e/0x1e0a net/ipv6/icmp.c:988
[<ffffffff85af6798>] ip6_protocol_deliver_rcu+0x18a/0x1976 net/ipv6/ip6_input.c:436
[<ffffffff85af8078>] ip6_input_finish+0xf4/0x174 net/ipv6/ip6_input.c:480
[<ffffffff85af8262>] NF_HOOK include/linux/netfilter.h:317 [inline]
[<ffffffff85af8262>] NF_HOOK include/linux/netfilter.h:311 [inline]
[<ffffffff85af8262>] ip6_input+0x16a/0x70c net/ipv6/ip6_input.c:491
[<ffffffff85af8dcc>] ip6_mc_input+0x5c8/0x1268 net/ipv6/ip6_input.c:588
[<ffffffff85af6112>] dst_input include/net/dst.h:469 [inline]
[<ffffffff85af6112>] ip6_rcv_finish net/ipv6/ip6_input.c:79 [inline]
[<ffffffff85af6112>] NF_HOOK include/linux/netfilter.h:317 [inline]
[<ffffffff85af6112>] NF_HOOK include/linux/netfilter.h:311 [inline]
[<ffffffff85af6112>] ipv6_rcv+0x5ae/0x6e0 net/ipv6/ip6_input.c:309
[<ffffffff85087e84>] __netif_receive_skb_one_core+0x106/0x16e net/core/dev.c:5977
[<ffffffff85088104>] __netif_receive_skb+0x2c/0x144 net/core/dev.c:6090
[<ffffffff850883c6>] netif_receive_skb_internal net/core/dev.c:6176 [inline]
[<ffffffff850883c6>] netif_receive_skb+0x1aa/0xbf2 net/core/dev.c:6235
[<ffffffff8328656e>] tun_rx_batched.isra.0+0x430/0x686 drivers/net/tun.c:1485
[<ffffffff8329ed3a>] tun_get_user+0x2952/0x3d6c drivers/net/tun.c:1938
[<ffffffff832a21e0>] tun_chr_write_iter+0xc4/0x21c drivers/net/tun.c:1984
[<ffffffff80b9b9ae>] new_sync_write fs/read_write.c:593 [inline]
[<ffffffff80b9b9ae>] vfs_write+0x56c/0xa9a fs/read_write.c:686
[<ffffffff80b9c2be>] ksys_write+0x126/0x228 fs/read_write.c:738
[<ffffffff80b9c42e>] __do_sys_write fs/read_write.c:749 [inline]
[<ffffffff80b9c42e>] __se_sys_write fs/read_write.c:746 [inline]
[<ffffffff80b9c42e>] __riscv_sys_write+0x6e/0x94 fs/read_write.c:746
[<ffffffff80076912>] syscall_handler+0x94/0x118 arch/riscv/include/asm/syscall.h:112
[<ffffffff8637e31e>] do_trap_ecall_u+0x396/0x530 arch/riscv/kernel/traps.c:341
[<ffffffff863a69e2>] handle_exception+0x146/0x152 arch/riscv/kernel/entry.S:197

Fixes: fa76c1674f2e ("ipv6: Move some validation from ip6_route_info_create() to rtm_to_fib6_config().")
Reported-by: syzbot+4c2358694722d304c44e@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/6849b8c3.a00a0220.1eb5f5.00f0.GAE@google.com/
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250611193551.2999991-1-kuni1840@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: drv: netdevsim: don't napi_complete() from netpoll

netdevsim supports netpoll. Make sure we don't call napi_complete()
from it, since it may not be scheduled. Breno reports hitting a
warning in napi_complete_done():

WARNING: CPU: 14 PID: 104 at net/core/dev.c:6592 napi_complete_done+0x2cc/0x560
__napi_poll+0x2d8/0x3a0
handle_softirqs+0x1fe/0x710

This is presumably after netpoll stole the SCHED bit prematurely.

Reported-by: Breno Leitao <leitao@debian.org>
Fixes: 3762ec05a9fb ("netdevsim: add NAPI support")
Tested-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250611174643.2769263-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/mlx5: HWS, Add error checking to hws_bwc_rule_complex_hash_node_get()

Check for if ida_alloc() or rhashtable_lookup_get_insert_fast() fails.

Fixes: 17e0accac577 ("net/mlx5: HWS, support complex matchers")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Link: https://patch.msgid.link/aEmBONjyiF6z5yCV@stanley.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

veth: prevent NULL pointer dereference in veth_xdp_rcv

The veth peer device is RCU protected, but when the peer device gets
deleted (veth_dellink) then the pointer is assigned NULL (via
RCU_INIT_POINTER).

This patch adds a necessary NULL check in veth_xdp_rcv when accessing
the veth peer net_device.

This fixes a bug introduced in commit dc82a33297fc ("veth: apply qdisc
backpressure on full ptr_ring to reduce TX drops"). The bug is a race
and only triggers when having inflight packets on a veth that is being
deleted.

Reported-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Closes: https://lore.kernel.org/all/fecfcad0-7a16-42b8-bff2-66ee83a6e5c4@linux.dev/
Reported-by: syzbot+c4c7bf27f6b0c4bd97fe@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/683da55e.a00a0220.d8eae.0052.GAE@google.com/
Fixes: dc82a33297fc ("veth: apply qdisc backpressure on full ptr_ring to reduce TX drops")
Signed-off-by: Jesper Dangaard Brouer <hawk@kernel.org>
Acked-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Link: https://patch.msgid.link/174964557873.519608.10855046105237280978.stgit@firesoul
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'net_sched-no-longer-use-qdisc_tree_flush_backlog'

Eric Dumazet says:

====================
net_sched: no longer use qdisc_tree_flush_backlog()

This series is based on a report from Gerrard Tai.

Essentially, all users of qdisc_tree_flush_backlog() are racy.

We must instead use qdisc_purge_queue().
====================

Link: https://patch.msgid.link/20250611111515.1983366-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net_sched: remove qdisc_tree_flush_backlog()

This function is no longer used after the four prior fixes.

Given all prior uses were wrong, it seems better to remove it.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250611111515.1983366-6-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net_sched: ets: fix a race in ets_qdisc_change()

Gerrard Tai reported a race condition in ETS, whenever SFQ perturb timer
fires at the wrong time.

The race is as follows:

CPU 0                                 CPU 1
[1]: lock root
[2]: qdisc_tree_flush_backlog()
[3]: unlock root
|
|                                    [5]: lock root
|                                    [6]: rehash
|                                    [7]: qdisc_tree_reduce_backlog()
|
[4]: qdisc_put()

This can be abused to underflow a parent's qlen.

Calling qdisc_purge_queue() instead of qdisc_tree_flush_backlog()
should fix the race, because all packets will be purged from the qdisc
before releasing the lock.

Fixes: b05972f01e7d ("net: sched: tbf: don't call qdisc_put() while holding tree lock")
Reported-by: Gerrard Tai <gerrard.tai@starlabs.sg>
Suggested-by: Gerrard Tai <gerrard.tai@starlabs.sg>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250611111515.1983366-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net_sched: tbf: fix a race in tbf_change()

Gerrard Tai reported a race condition in TBF, whenever SFQ perturb timer
fires at the wrong time.

The race is as follows:

CPU 0                                 CPU 1
[1]: lock root
[2]: qdisc_tree_flush_backlog()
[3]: unlock root
|
|                                    [5]: lock root
|                                    [6]: rehash
|                                    [7]: qdisc_tree_reduce_backlog()
|
[4]: qdisc_put()

This can be abused to underflow a parent's qlen.

Calling qdisc_purge_queue() instead of qdisc_tree_flush_backlog()
should fix the race, because all packets will be purged from the qdisc
before releasing the lock.

Fixes: b05972f01e7d ("net: sched: tbf: don't call qdisc_put() while holding tree lock")
Reported-by: Gerrard Tai <gerrard.tai@starlabs.sg>
Suggested-by: Gerrard Tai <gerrard.tai@starlabs.sg>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Zhengchao Shao <shaozhengchao@huawei.com>
Link: https://patch.msgid.link/20250611111515.1983366-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net_sched: red: fix a race in __red_change()

Gerrard Tai reported a race condition in RED, whenever SFQ perturb timer
fires at the wrong time.

The race is as follows:

CPU 0                                 CPU 1
[1]: lock root
[2]: qdisc_tree_flush_backlog()
[3]: unlock root
|
|                                    [5]: lock root
|                                    [6]: rehash
|                                    [7]: qdisc_tree_reduce_backlog()
|
[4]: qdisc_put()

This can be abused to underflow a parent's qlen.

Calling qdisc_purge_queue() instead of qdisc_tree_flush_backlog()
should fix the race, because all packets will be purged from the qdisc
before releasing the lock.

Fixes: 0c8d13ac9607 ("net: sched: red: delay destroying child qdisc on replace")
Reported-by: Gerrard Tai <gerrard.tai@starlabs.sg>
Suggested-by: Gerrard Tai <gerrard.tai@starlabs.sg>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250611111515.1983366-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net_sched: prio: fix a race in prio_tune()

Gerrard Tai reported a race condition in PRIO, whenever SFQ perturb timer
fires at the wrong time.

The race is as follows:

CPU 0                                 CPU 1
[1]: lock root
[2]: qdisc_tree_flush_backlog()
[3]: unlock root
|
|                                    [5]: lock root
|                                    [6]: rehash
|                                    [7]: qdisc_tree_reduce_backlog()
|
[4]: qdisc_put()

This can be abused to underflow a parent's qlen.

Calling qdisc_purge_queue() instead of qdisc_tree_flush_backlog()
should fix the race, because all packets will be purged from the qdisc
before releasing the lock.

Fixes: 7b8e0b6e6599 ("net: sched: prio: delay destroying child qdiscs on change")
Reported-by: Gerrard Tai <gerrard.tai@starlabs.sg>
Suggested-by: Gerrard Tai <gerrard.tai@starlabs.sg>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250611111515.1983366-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net_sched: sch_sfq: reject invalid perturb period

Gerrard Tai reported that SFQ perturb_period has no range check yet,
and this can be used to trigger a race condition fixed in a separate patch.

We want to make sure ctl->perturb_period * HZ will not overflow
and is positive.

Tested:

tc qd add dev lo root sfq perturb -10 # negative value : error
Error: sch_sfq: invalid perturb period.

tc qd add dev lo root sfq perturb 1000000000 # too big : error
Error: sch_sfq: invalid perturb period.

tc qd add dev lo root sfq perturb 2000000 # acceptable value
tc -s -d qd sh dev lo
qdisc sfq 8005: root refcnt 2 limit 127p quantum 64Kb depth 127 flows 128 divisor 1024 perturb 2000000sec
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Gerrard Tai <gerrard.tai@starlabs.sg>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20250611083501.1810459-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: phy: phy_caps: Don't skip better duplex macth on non-exact match

When performing a non-exact phy_caps lookup, we are looking for a
supported mode that matches as closely as possible the passed speed/duplex.

Blamed patch broke that logic by returning a match too early in case
the caller asks for half-duplex, as a full-duplex linkmode may match
first, and returned as a non-exact match without even trying to mach on
half-duplex modes.

Reported-by: Jijie Shao <shaojijie@huawei.com>
Closes: https://lore.kernel.org/netdev/20250603102500.4ec743cf@fedora/T/#m22ed60ca635c67dc7d9cbb47e8995b2beb5c1576
Tested-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Fixes: fc81e257d19f ("net: phy: phy_caps: Allow looking-up link caps based on speed and duplex")
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20250606094321.483602-1-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

MAINTAINERS: Update Kuniyuki Iwashima's email address.

I left Amazon and joined Google, so let's map the email
addresses accordingly.

Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250610235734.88540-1-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: net: add test case for NAT46 looping back dst

Simple test for crash involving multicast loopback and stale dst.
Reuse exising NAT46 program.

Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250610001245.1981782-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: clear the dst when changing skb protocol

A not-so-careful NAT46 BPF program can crash the kernel
if it indiscriminately flips ingress packets from v4 to v6:

  BUG: kernel NULL pointer dereference, address: 0000000000000000
    ip6_rcv_core (net/ipv6/ip6_input.c:190:20)
    ipv6_rcv (net/ipv6/ip6_input.c:306:8)
    process_backlog (net/core/dev.c:6186:4)
    napi_poll (net/core/dev.c:6906:9)
    net_rx_action (net/core/dev.c:7028:13)
    do_softirq (kernel/softirq.c:462:3)
    netif_rx (net/core/dev.c:5326:3)
    dev_loopback_xmit (net/core/dev.c:4015:2)
    ip_mc_finish_output (net/ipv4/ip_output.c:363:8)
    NF_HOOK (./include/linux/netfilter.h:314:9)
    ip_mc_output (net/ipv4/ip_output.c:400:5)
    dst_output (./include/net/dst.h:459:9)
    ip_local_out (net/ipv4/ip_output.c:130:9)
    ip_send_skb (net/ipv4/ip_output.c:1496:8)
    udp_send_skb (net/ipv4/udp.c:1040:8)
    udp_sendmsg (net/ipv4/udp.c:1328:10)

The output interface has a 4->6 program attached at ingress.
We try to loop the multicast skb back to the sending socket.
Ingress BPF runs as part of netif_rx(), pushes a valid v6 hdr
and changes skb->protocol to v6. We enter ip6_rcv_core which
tries to use skb_dst(). But the dst is still an IPv4 one left
after IPv4 mcast output.

Clear the dst in all BPF helpers which change the protocol.
Try to preserve metadata dsts, those may carry non-routing
metadata.

Cc: stable@vger.kernel.org
Reviewed-by: Maciej Żenczykowski <maze@google.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Fixes: d219df60a70e ("bpf: Add ipip6 and ip6ip decap support for bpf_skb_adjust_room()")
Fixes: 1b00e0dfe7d0 ("bpf: update skb->protocol in bpf_skb_net_grow")
Fixes: 6578171a7ff0 ("bpf: add bpf_skb_change_proto helper")
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250610001245.1981782-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'mlx5-misc-fixes-2025-06-10'

Mark Bloch says:

====================
mlx5 misc fixes 2025-06-10

This patchset includes misc fixes from the team for the mlx5 core
and Ethernet drivers.
====================

Link: https://patch.msgid.link/20250610151514.1094735-1-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/mlx5e: Fix number of lanes to UNKNOWN when using data_rate_oper

When the link is up, either eth_proto_oper or ext_eth_proto_oper
typically reports the active link protocol, from which both speed
and number of lanes can be retrieved. However, in certain cases,
such as when a NIC is connected via a non-standard cable, the
firmware may not report the protocol.

In such scenarios, the speed can still be obtained from the
data_rate_oper field in PTYS register. Since data_rate_oper
provides only speed information and lacks lane details, it is
incorrect to derive the number of lanes from it.

This patch corrects the behavior by setting the number of lanes to
UNKNOWN instead of incorrectly using MAX_LANES when relying on
data_rate_oper.

Fixes: 7e959797f021 ("net/mlx5e: Enable lanes configuration when auto-negotiation is off")
Signed-off-by: Shahar Shitrit <shshitrit@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250610151514.1094735-10-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/mlx5e: Fix leak of Geneve TLV option object

Previously, a unique tunnel id was added for the matching on TC
non-zero chains, to support inner header rewrite with goto action.
Later, it was used to support VF tunnel offload for vxlan, then for
Geneve and GRE. To support VF tunnel, a temporary mlx5_flow_spec is
used to parse tunnel options. For Geneve, if there is TLV option, a
object is created, or refcnt is added if already exists. But the
temporary mlx5_flow_spec is directly freed after parsing, which causes
the leak because no information regarding the object is saved in
flow's mlx5_flow_spec, which is used to free the object when deleting
the flow.

To fix the leak, call mlx5_geneve_tlv_option_del() before free the
temporary spec if it has TLV object.

Fixes: 521933cdc4aa ("net/mlx5e: Support Geneve and GRE with VF tunnel offload")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Alex Lazar <alazar@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250610151514.1094735-9-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/mlx5: HWS, make sure the uplink is the last destination

When there are more than one destinations, we create a FW flow
table and provide it with all the destinations. FW requires to
have wire as the last destination in the list (if it exists),
otherwise the operation fails with FW syndrome.

This patch fixes the destination array action creation: if it
contains a wire destination, it is moved to the end.

Fixes: 504e536d9010 ("net/mlx5: HWS, added actions handling")
Signed-off-by: Vlad Dogaru <vdogaru@nvidia.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250610151514.1094735-7-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/mlx5: HWS, fix missing ip_version handling in definer

Fix missing field handling in definer - outer IP version.

Fixes: 74a778b4a63f ("net/mlx5: HWS, added definers handling")
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250610151514.1094735-6-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/mlx5: HWS, Init mutex on the correct path

The newly introduced mutex is only used for reformat actions, but it was
initialized for modify header instead.

The struct that contains the mutex is zero-initialized and an all-zero
mutex is valid, so the issue only shows up with CONFIG_DEBUG_MUTEXES.

Fixes: b206d9ec19df ("net/mlx5: HWS, register reformat actions with fw")
Signed-off-by: Vlad Dogaru <vdogaru@nvidia.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250610151514.1094735-5-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/mlx5: Fix return value when searching for existing flow group

When attempting to add a rule to an existing flow group, if a matching
flow group exists but is not active, the error code returned should be
EAGAIN, so that the rule can be added to the matching flow group once
it is active, rather than ENOENT, which indicates that no matching
flow group was found.

Fixes: bd71b08ec2ee ("net/mlx5: Support multiple updates of steering rules in parallel")
Signed-off-by: Gavi Teitz <gavi@nvidia.com>
Signed-off-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250610151514.1094735-4-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/mlx5: Fix ECVF vports unload on shutdown flow

Fix shutdown flow UAF when a virtual function is created on the embedded
chip (ECVF) of a BlueField device. In such case the vport acl ingress
table is not properly destroyed.

ECVF functionality is independent of ecpf_vport_exists capability and
thus functions mlx5_eswitch_(enable|disable)_pf_vf_vports() should not
test it when enabling/disabling ECVF vports.

kernel log:
[] refcount_t: underflow; use-after-free.
[] WARNING: CPU: 3 PID: 1 at lib/refcount.c:28
refcount_warn_saturate+0x124/0x220
----------------
[] Call trace:
[] refcount_warn_saturate+0x124/0x220
[] tree_put_node+0x164/0x1e0 [mlx5_core]
[] mlx5_destroy_flow_table+0x98/0x2c0 [mlx5_core]
[] esw_acl_ingress_table_destroy+0x28/0x40 [mlx5_core]
[] esw_acl_ingress_lgcy_cleanup+0x80/0xf4 [mlx5_core]
[] esw_legacy_vport_acl_cleanup+0x44/0x60 [mlx5_core]
[] esw_vport_cleanup+0x64/0x90 [mlx5_core]
[] mlx5_esw_vport_disable+0xc0/0x1d0 [mlx5_core]
[] mlx5_eswitch_unload_ec_vf_vports+0xcc/0x150 [mlx5_core]
[] mlx5_eswitch_disable_sriov+0x198/0x2a0 [mlx5_core]
[] mlx5_device_disable_sriov+0xb8/0x1e0 [mlx5_core]
[] mlx5_sriov_detach+0x40/0x50 [mlx5_core]
[] mlx5_unload+0x40/0xc4 [mlx5_core]
[] mlx5_unload_one_devl_locked+0x6c/0xe4 [mlx5_core]
[] mlx5_unload_one+0x3c/0x60 [mlx5_core]
[] shutdown+0x7c/0xa4 [mlx5_core]
[] pci_device_shutdown+0x3c/0xa0
[] device_shutdown+0x170/0x340
[] __do_sys_reboot+0x1f4/0x2a0
[] __arm64_sys_reboot+0x2c/0x40
[] invoke_syscall+0x78/0x100
[] el0_svc_common.constprop.0+0x54/0x184
[] do_el0_svc+0x30/0xac
[] el0_svc+0x48/0x160
[] el0t_64_sync_handler+0xa4/0x12c
[] el0t_64_sync+0x1a4/0x1a8
[] --[ end trace 9c4601d68c70030e ]---

Fixes: a7719b29a821 ("net/mlx5: Add management of EC VF vports")
Reviewed-by: Daniel Jurgens <danielj@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Amir Tzin <amirtz@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250610151514.1094735-3-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/mlx5: Ensure fw pages are always allocated on same NUMA

When firmware asks the driver to allocate more pages, using event of
give_pages, the driver should always allocate it from same NUMA, the
original device NUMA. Current code uses dev_to_node() which can result
in different NUMA as it is changed by other driver flows, such as
mlx5_dma_zalloc_coherent_node(). Instead, use saved numa node for
allocating firmware pages.

Fixes: 311c7c71c9bb ("net/mlx5e: Allocate DMA coherent memory on reader NUMA node")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250610151514.1094735-2-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch '40GbE' of git://git./linux/kernel/git/tnguy/net-queue

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2025-06-10 (i40e, iavf, ice, e1000)

For i40e:
Robert Malz improves reset handling for situations where multiple reset
requests could cause some to be missed.

For iavf:
Ahmed adds detection, and handling, of reset that could occur early in
the initialization process to stop long wait/hangs.

For ice:
Anton, properly, sets missed use_nsecs value.

For e1000:
Joe Damato moves cancel_work_sync() call to avoid deadlock.

* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
  e1000: Move cancel_work_sync to avoid deadlock
  ice/ptp: fix crosstimestamp reporting
  iavf: fix reset_task for early reset event
  i40e: retry VFLR handling if there is ongoing VF reset
  i40e: return false from i40e_reset_vf if reset is in progress
====================

Link: https://patch.msgid.link/20250610171348.1476574-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Bluetooth: MGMT: Fix sparse errors

This fixes the following errors:

net/bluetooth/mgmt.c:5400:59: sparse: sparse: incorrect type in argument 3
(different base types) @@     expected unsigned short [usertype] handle @@
got restricted __le16 [usertype] monitor_handle @@
net/bluetooth/mgmt.c:5400:59: sparse:     expected unsigned short [usertype] handle
net/bluetooth/mgmt.c:5400:59: sparse:     got restricted __le16 [usertype] monitor_handle

Fixes: e6ed54e86aae ("Bluetooth: MGMT: Fix UAF on mgmt_remove_adv_monitor_complete")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202506060347.ux2O1p7L-lkp@intel.com/
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Bluetooth: ISO: Fix not using bc_sid as advertisement SID

Currently bc_sid is being ignore when acting as Broadcast Source role,
so this fix it by passing the bc_sid and then use it when programming
the PA:

< HCI Command: LE Set Exte.. (0x08|0x0036) plen 25
        Handle: 0x01
        Properties: 0x0000
        Min advertising interval: 140.000 msec (0x00e0)
        Max advertising interval: 140.000 msec (0x00e0)
        Channel map: 37, 38, 39 (0x07)
        Own address type: Random (0x01)
        Peer address type: Public (0x00)
        Peer address: 00:00:00:00:00:00 (OUI 00-00-00)
        Filter policy: Allow Scan Request from Any, Allow Connect Request from Any (0x00)
        TX power: Host has no preference (0x7f)
        Primary PHY: LE 1M (0x01)
        Secondary max skip: 0x00
        Secondary PHY: LE 2M (0x02)
        SID: 0x01
        Scan request notifications: Disabled (0x00)

Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Bluetooth: ISO: Fix using BT_SK_PA_SYNC to detect BIS sockets

BT_SK_PA_SYNC is only valid for Broadcast Sinks which means socket used
for Broadcast Sources wouldn't be able to use the likes of getpeername
to read out the sockaddr_iso_bc fields which may have been update (e.g.
bc_sid).

Fixes: 0a766a0affb5 ("Bluetooth: ISO: Fix getpeername not returning sockaddr_iso_bc fields")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Bluetooth: eir: Fix possible crashes on eir_create_adv_data

eir_create_adv_data may attempt to add EIR_FLAGS and EIR_TX_POWER
without checking if that would fit.

Link: https://github.com/bluez/bluez/issues/1117#issuecomment-2958244066
Fixes: 01ce70b0a274 ("Bluetooth: eir: Move EIR/Adv Data functions to its own file")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Bluetooth: hci_sync: Fix broadcast/PA when using an existing instance

When using and existing adv_info instance for broadcast source it
needs to be updated to periodic first before it can be reused, also in
case the existing instance already have data hci_set_adv_instance_data
cannot be used directly since it would overwrite the existing data so
this reappend the original data after the Broadcast ID, if one was
generated.

Example:

bluetoothctl># Add PBP to EA so it can be later referenced as the BIS ID
bluetoothctl> advertise.service 0x1856 0x00 0x00
bluetoothctl> advertise on
...
< HCI Command: LE Set Extended Advertising Data (0x08|0x0037) plen 13
        Handle: 0x01
        Operation: Complete extended advertising data (0x03)
        Fragment preference: Minimize fragmentation (0x01)
        Data length: 0x09
        Service Data: Public Broadcast Announcement (0x1856)
          Data[2]: 0000
        Flags: 0x06
          LE General Discoverable Mode
          BR/EDR Not Supported
...
bluetoothctl># Attempt to acquire Broadcast Source transport
bluetoothctl>transport.acquire /org/bluez/hci0/pac_bcast0/fd0
...
< HCI Command: LE Set Extended Advertising Data (0x08|0x0037) plen 255
        Handle: 0x01
        Operation: Complete extended advertising data (0x03)
        Fragment preference: Minimize fragmentation (0x01)
        Data length: 0x0e
        Service Data: Broadcast Audio Announcement (0x1852)
        Broadcast ID: 11371620 (0xad8464)
        Service Data: Public Broadcast Announcement (0x1856)
          Data[2]: 0000
        Flags: 0x06
          LE General Discoverable Mode
          BR/EDR Not Supported

Link: https://github.com/bluez/bluez/issues/1117
Fixes: eca0ae4aea66 ("Bluetooth: Add initial implementation of BIS connections")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Bluetooth: Fix NULL pointer deference on eir_get_service_data

The len parameter is considered optional so it can be NULL so it cannot
be used for skipping to next entry of EIR_SERVICE_DATA.

Fixes: 8f9ae5b3ae80 ("Bluetooth: eir: Add helpers for managing service data")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

net/mdiobus: Fix potential out-of-bounds clause 45 read/write access

When using publicly available tools like 'mdio-tools' to read/write data
from/to network interface and its PHY via C45 (clause 45) mdiobus,
there is no verification of parameters passed to the ioctl and
it accepts any mdio address.
Currently there is support for 32 addresses in kernel via PHY_MAX_ADDR define,
but it is possible to pass higher value than that via ioctl.
While read/write operation should generally fail in this case,
mdiobus provides stats array, where wrong address may allow out-of-bounds
read/write.

Fix that by adding address verification before C45 read/write operation.
While this excludes this access from any statistics, it improves security of
read/write operation.

Fixes: 4e4aafcddbbf ("net: mdio: Add dedicated C45 API to MDIO bus drivers")
Signed-off-by: Jakub Raczynski <j.raczynski@samsung.com>
Reported-by: Wenjing Shan <wenjing.shan@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/mdiobus: Fix potential out-of-bounds read/write access

When using publicly available tools like 'mdio-tools' to read/write data
from/to network interface and its PHY via mdiobus, there is no verification of
parameters passed to the ioctl and it accepts any mdio address.
Currently there is support for 32 addresses in kernel via PHY_MAX_ADDR define,
but it is possible to pass higher value than that via ioctl.
While read/write operation should generally fail in this case,
mdiobus provides stats array, where wrong address may allow out-of-bounds
read/write.

Fix that by adding address verification before read/write operation.
While this excludes this access from any statistics, it improves security of
read/write operation.

Fixes: 080bb352fad00 ("net: phy: Maintain MDIO device and bus statistics")
Signed-off-by: Jakub Raczynski <j.raczynski@samsung.com>
Reported-by: Wenjing Shan <wenjing.shan@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

wifi: cfg80211: use kfree_sensitive() for connkeys cleanup

The nl80211_parse_connkeys() function currently uses kfree() to release
the 'result' structure in error handling paths. However, if an error
occurs due to result->def being less than 0, the 'result' structure may
contain sensitive information.

To prevent potential leakage of sensitive data, replace kfree() with
kfree_sensitive() when freeing 'result'. This change aligns with the
approach used in its caller, nl80211_join_ibss(), enhancing the overall
security of the wireless subsystem.

Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Link: https://patch.msgid.link/20250523110156.4017111-1-zilin@seu.edu.cn
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Merge tag 'ath-current-20250608' of git://git./linux/kernel/git/ath/ath

Jeff Johnson says:
==================
ath.git updates for v6.16-rc2

Fix a handful of both build and stability issues across multiple drivers.
==================

Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: fix merge damage related to iwl_pci_resume

The changes I made in
wifi: iwlwifi: don't warn if the NIC is gone in resume
conflicted with a major rework done in this area.
The merge de-facto removed my changes.
Re-add them.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20250603091754.70182-1-emmanuel.grumbach@intel.com
Fixes: 06c4b2036818 ("Merge tag 'iwlwifi-next-2025-05-15' of https://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Revert "wifi: mwifiex: Fix HT40 bandwidth issue."

This reverts commit 4fcfcbe45734 ("wifi: mwifiex: Fix HT40 bandwidth
issue.")

That commit introduces a regression, when HT40 mode is enabled,
received packets are lost, this was experience with W8997 with both
SDIO-UART and SDIO-SDIO variants. From an initial investigation the
issue solves on its own after some time, but it's not clear what is
the reason. Given that this was just a performance optimization, let's
revert it till we have a better understanding of the issue and a proper
fix.

Cc: Jeff Chen <jeff.chen_1@nxp.com>
Cc: stable@vger.kernel.org
Fixes: 4fcfcbe45734 ("wifi: mwifiex: Fix HT40 bandwidth issue.")
Closes: https://lore.kernel.org/all/20250603203337.GA109929@francesco-nb/
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://patch.msgid.link/20250605130302.55555-1-francesco@dolcini.it
[fix commit reference format]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

macsec: MACsec SCI assignment for ES = 0

According to 802.1AE standard, when ES and SC flags in TCI are zero,
used SCI should be the current active SC_RX. Current code uses the
header MAC address. Without this patch, when ES flag is 0 (using a
bridge or switch), header MAC will not fit the SCI and MACSec frames
will be discarted.

In order to test this issue, MACsec link should be stablished between
two interfaces, setting SC and ES flags to zero and a port identifier
different than one. For example, using ip macsec tools:

ip link add link $ETH0 macsec0 type macsec port 11 send_sci off
end_station off
ip macsec add macsec0 tx sa 0 pn 2 on key 01 $ETH1_KEY
ip macsec add macsec0 rx port 11 address $ETH1_MAC
ip macsec add macsec0 rx port 11 address $ETH1_MAC sa 0 pn 2 on key 02
ip link set dev macsec0 up

ip link add link $ETH1 macsec1 type macsec port 11 send_sci off
end_station off
ip macsec add macsec1 tx sa 0 pn 2 on key 01 $ETH0_KEY
ip macsec add macsec1 rx port 11 address $ETH0_MAC
ip macsec add macsec1 rx port 11 address $ETH0_MAC sa 0 pn 2 on key 02
ip link set dev macsec1 up

Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver")
Co-developed-by: Andreu Montiel <Andreu.Montiel@technica-engineering.de>
Signed-off-by: Andreu Montiel <Andreu.Montiel@technica-engineering.de>
Signed-off-by: Carlos Fernandez <carlos.fernandez@technica-engineering.de>
Reviewed-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: airoha: Enable RX queues 16-31

Fix RX_DONE_INT_MASK definition in order to enable RX queues 16-31.

Fixes: f252493e18353 ("net: airoha: Enable multiple IRQ lines support in airoha_eth driver.")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250609-aioha-fix-rx-queue-mask-v1-1-f33706a06fa2@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

netconsole: fix appending sysdata when sysdata_fields == SYSDATA_RELEASE

Before appending sysdata, prepare_extradata() checks if any feature is
enabled in sysdata_fields (and exits early if none is enabled).

When SYSDATA_RELEASE was introduced, we missed adding it to the list of
features being checked against sysdata_fields in prepare_extradata().
The result was that, if only SYSDATA_RELEASE is enabled in
sysdata_fields, we incorreclty exit early and fail to append the
release.

Instead of checking specific bits in sysdata_fields, check if
sysdata_fields has ALL bit zeroed and exit early if true. This fixes
case when only SYSDATA_RELEASE enabled and makes the code more general /
less error prone in future feature implementation.

Signed-off-by: Gustavo Luiz Duarte <gustavold@gmail.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Fixes: cfcc9239e78a ("netconsole: append release to sysdata")
Link: https://patch.msgid.link/20250609-netconsole-fix-v1-1-17543611ae31@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: Fix TOCTOU issue in sk_is_readable()

sk->sk_prot->sock_is_readable is a valid function pointer when sk resides
in a sockmap. After the last sk_psock_put() (which usually happens when
socket is removed from sockmap), sk->sk_prot gets restored and
sk->sk_prot->sock_is_readable becomes NULL.

This makes sk_is_readable() racy, if the value of sk->sk_prot is reloaded
after the initial check. Which in turn may lead to a null pointer
dereference.

Ensure the function pointer does not turn NULL after the check.

Fixes: 8934ce2fd081 ("bpf: sockmap redirect ingress support")
Suggested-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250609-skisreadable-toctou-v1-1-d0dfb2d62c37@rbox.co
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: usb: r8152: Add device ID for TP-Link UE200

The TP-Link UE200 is a RTL8152B based USB 2.0 Fast Ethernet adapter. This
patch adds its device ID. It has been tested on Ubuntu 22.04.5.

Signed-off-by: Lucas Sanchez Sagrado <lucsansag@gmail.com>
Reviewed-by: Subbaraya Sundeep <sbhatta@marvell.com>
Link: https://patch.msgid.link/20250609145536.26648-1-lucsansag@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

e1000: Move cancel_work_sync to avoid deadlock

Previously, e1000_down called cancel_work_sync for the e1000 reset task
(via e1000_down_and_stop), which takes RTNL.

As reported by users and syzbot, a deadlock is possible in the following
scenario:

CPU 0:
  - RTNL is held
  - e1000_close
  - e1000_down
  - cancel_work_sync (cancel / wait for e1000_reset_task())

CPU 1:
  - process_one_work
  - e1000_reset_task
  - take RTNL

To remedy this, avoid calling cancel_work_sync from e1000_down
(e1000_reset_task does nothing if the device is down anyway). Instead,
call cancel_work_sync for e1000_reset_task when the device is being
removed.

Fixes: e400c7444d84 ("e1000: Hold RTNL when e1000_down can be called")
Reported-by: syzbot+846bb38dc67fe62cc733@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/683837bf.a00a0220.52848.0003.GAE@google.com/
Reported-by: John <john.cs.hey@gmail.com>
Closes: https://lore.kernel.org/netdev/CAP=Rh=OEsn4y_2LvkO3UtDWurKcGPnZ_NPSXK=FbgygNXL37Sw@mail.gmail.com/
Signed-off-by: Joe Damato <jdamato@fastly.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Acked-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

ice/ptp: fix crosstimestamp reporting

Set use_nsecs=true as timestamp is reported in ns. Lack of this result
in smaller timestamp error window which cause error during phc2sys
execution on E825 NICs:
phc2sys[1768.256]: ioctl PTP_SYS_OFFSET_PRECISE: Invalid argument

This problem was introduced in the cited commit which omitted setting
use_nsecs to true when converting the ice driver to use
convert_base_to_cs().

Testing hints (ethX is PF netdev):
phc2sys -s ethX -c CLOCK_REALTIME -O 37 -m
phc2sys[1769.256]: CLOCK_REALTIME phc offset -5 s0 freq -0 delay 0

Fixes: d4bea547ebb57 ("ice/ptp: Remove convert_art_to_tsc()")
Signed-off-by: Anton Nadezhdin <anton.nadezhdin@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

iavf: fix reset_task for early reset event

If a reset event is received from the PF early in the init cycle, the
state machine hangs for about 25 seconds.

Reproducer:
  echo 1 > /sys/class/net/$PF0/device/sriov_numvfs
  ip link set dev $PF0 vf 0 mac $NEW_MAC

The log shows:
  [792.620416] ice 0000:5e:00.0: Enabling 1 VFs
  [792.738812] iavf 0000:5e:01.0: enabling device (0000 -> 0002)
  [792.744182] ice 0000:5e:00.0: Enabling 1 VFs with 17 vectors and 16 queues per VF
  [792.839964] ice 0000:5e:00.0: Setting MAC 52:54:00:00:00:11 on VF 0. VF driver will be reinitialized
  [813.389684] iavf 0000:5e:01.0: Failed to communicate with PF; waiting before retry
  [818.635918] iavf 0000:5e:01.0: Hardware came out of reset. Attempting reinit.
  [818.766273] iavf 0000:5e:01.0: Multiqueue Enabled: Queue pair count = 16

Fix it by scheduling the reset task and making the reset task capable of
resetting early in the init cycle.

Fixes: ef8693eb90ae3 ("i40evf: refactor reset handling")
Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com>
Tested-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

i40e: retry VFLR handling if there is ongoing VF reset

When a VFLR interrupt is received during a VF reset initiated from a
different source, the VFLR may be not fully handled. This can
leave the VF in an undefined state.
To address this, set the I40E_VFLR_EVENT_PENDING bit again during VFLR
handling if the reset is not yet complete. This ensures the driver
will properly complete the VF reset in such scenarios.

Fixes: 52424f974bc5 ("i40e: Fix VF hang when reset is triggered on another VF")
Signed-off-by: Robert Malz <robert.malz@canonical.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

i40e: return false from i40e_reset_vf if reset is in progress

The function i40e_vc_reset_vf attempts, up to 20 times, to handle a
VF reset request, using the return value of i40e_reset_vf as an indicator
of whether the reset was successfully triggered. Currently, i40e_reset_vf
always returns true, which causes new reset requests to be ignored if a
different VF reset is already in progress.

This patch updates the return value of i40e_reset_vf to reflect when
another VF reset is in progress, allowing the caller to properly use
the retry mechanism.

Fixes: 52424f974bc5 ("i40e: Fix VF hang when reset is triggered on another VF")
Signed-off-by: Robert Malz <robert.malz@canonical.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Merge tag 'for-net-2025-06-05' of git://git./linux/kernel/git/bluetooth/bluetooth

Luiz Augusto von Dentz says:

====================
bluetooth pull request for net:

- MGMT: Fix UAF on mgmt_remove_adv_monitor_complete
- MGMT: Protect mgmt_pending list with its own lock
- hci_core: fix list_for_each_entry_rcu usage
- btintel_pcie: Increase the tx and rx descriptor count
- btintel_pcie: Reduce driver buffer posting to prevent race condition
- btintel_pcie: Fix driver not posting maximum rx buffers

* tag 'for-net-2025-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
  Bluetooth: MGMT: Protect mgmt_pending list with its own lock
  Bluetooth: MGMT: Fix UAF on mgmt_remove_adv_monitor_complete
  Bluetooth: btintel_pcie: Reduce driver buffer posting to prevent race condition
  Bluetooth: btintel_pcie: Increase the tx and rx descriptor count
  Bluetooth: btintel_pcie: Fix driver not posting maximum rx buffers
  Bluetooth: hci_core: fix list_for_each_entry_rcu usage
====================

Link: https://patch.msgid.link/20250605191136.904411-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net_sched: sch_sfq: fix a potential crash on gso_skb handling

SFQ has an assumption of always being able to queue at least one packet.

However, after the blamed commit, sch->q.len can be inflated by packets
in sch->gso_skb, and an enqueue() on an empty SFQ qdisc can be followed
by an immediate drop.

Fix sfq_drop() to properly clear q->tail in this situation.

Tested:

ip netns add lb
ip link add dev to-lb type veth peer name in-lb netns lb
ethtool -K to-lb tso off # force qdisc to requeue gso_skb
ip netns exec lb ethtool -K in-lb gro on # enable NAPI
ip link set dev to-lb up
ip -netns lb link set dev in-lb up
ip addr add dev to-lb 192.168.20.1/24
ip -netns lb addr add dev in-lb 192.168.20.2/24
tc qdisc replace dev to-lb root sfq limit 100

ip netns exec lb netserver

netperf -H 192.168.20.2 -l 100 &
netperf -H 192.168.20.2 -l 100 &
netperf -H 192.168.20.2 -l 100 &
netperf -H 192.168.20.2 -l 100 &

Fixes: a53851e2c321 ("net: sched: explicit locking in gso_cpu fallback")
Reported-by: Marcus Wichelmann <marcus.wichelmann@hetzner-cloud.de>
Closes: https://lore.kernel.org/netdev/9da42688-bfaa-4364-8797-e9271f3bdaef@hetzner-cloud.de/
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://patch.msgid.link/20250606165127.3629486-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

wifi: ath12k: fix uaf in ath12k_core_init()

When the execution of ath12k_core_hw_group_assign() or
ath12k_core_hw_group_create() fails, the registered notifier chain is not
unregistered properly. Its memory is freed after rmmod, which may trigger
to a use-after-free (UAF) issue if there is a subsequent access to this
notifier chain.

Fixes the issue by calling ath12k_core_panic_notifier_unregister() in
failure cases.

Call trace:
notifier_chain_register+0x4c/0x1f0 (P)
atomic_notifier_chain_register+0x38/0x68
ath12k_core_init+0x50/0x4e8 [ath12k]
ath12k_pci_probe+0x5f8/0xc28 [ath12k]
pci_device_probe+0xbc/0x1a8
really_probe+0xc8/0x3a0
__driver_probe_device+0x84/0x1b0
driver_probe_device+0x44/0x130
__driver_attach+0xcc/0x208
bus_for_each_dev+0x84/0x100
driver_attach+0x2c/0x40
bus_add_driver+0x130/0x260
driver_register+0x70/0x138
__pci_register_driver+0x68/0x80
ath12k_pci_init+0x30/0x68 [ath12k]
ath12k_init+0x28/0x78 [ath12k]

Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3

Fixes: 6f245ea0ec6c ("wifi: ath12k: introduce device group abstraction")
Signed-off-by: Miaoqing Pan <miaoqing.pan@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <quic_bqiang@quicinc.com>
Link: https://patch.msgid.link/20250604055250.1228501-1-miaoqing.pan@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>

wifi: ath12k: Fix hal_reo_cmd_status kernel-doc

Currently a warning is reported when running:

% scripts/kernel-doc -Wall -Werror -none drivers/net/wireless/ath/ath12k/hal.h
Warning: drivers/net/wireless/ath/ath12k/hal.h:596 Enum value 'HAL_REO_CMD_RESOURCE_BLOCKED' not described in enum 'hal_reo_cmd_status'

Add the missing description of HAL_REO_CMD_RESOURCE_BLOCKED.

Link: https://patch.msgid.link/20250605-hal_reo_cmd_status-kdoc-v1-1-e59f4b814b88@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>

wifi: ath12k: fix GCC_GCC_PCIE_HOT_RST definition for WCN7850

GCC_GCC_PCIE_HOT_RST is wrongly defined for WCN7850, causing kernel crash
on some specific platforms.

Since this register is divergent for WCN7850 and QCN9274, move it to
register table to allow different definitions. Then correct the register
address for WCN7850 to fix this issue.

Note IPQ5332 is not affected as it is not PCIe based device.

Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3

Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Reported-by: Parth Pancholi <parth.pancholi@toradex.com>
Closes: https://lore.kernel.org/all/86899b2235a59c9134603beebe08f2bb0b244ea0.camel@gmail.com
Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices")
Tested-by: Parth Pancholi <parth.pancholi@toradex.com>
Link: https://patch.msgid.link/20250523-ath12k-wrong-global-reset-addr-v1-1-3b06eb556196@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>

wifi: ath11k: validate ath11k_crypto_mode on top of ath11k_core_qmi_firmware_ready

if ath11k_crypto_mode is invalid (not ATH11K_CRYPT_MODE_SW/ATH11K_CRYPT_MODE_HW),
ath11k_core_qmi_firmware_ready() will not undo some actions that was previously
started/configured. Do the validation as soon as possible in order to avoid
undoing actions in that case and also to fix the following smatch warning:

drivers/net/wireless/ath/ath11k/core.c:2166 ath11k_core_qmi_firmware_ready()
warn: missing unwind goto?

Signed-off-by: Rodrigo Gobbi <rodrigo.gobbi.7@gmail.com>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Closes: https://lore.kernel.org/r/202304151955.oqAetVFd-lkp@intel.com/
Fixes: aa2092a9bab3 ("ath11k: add raw mode and software crypto support")
Reviewed-by: Baochen Qiang <quic_bqiang@quicinc.com>
Link: https://patch.msgid.link/20250522200519.16858-1-rodrigo.gobbi.7@gmail.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>

wifi: ath11k: consistently use ath11k_mac_get_fw_stats()

Currently to get firmware stats, ath11k_mac_op_get_txpower() calls
ath11k_fw_stats_request() and ath11k_mac_op_sta_statistics() calls
ath11k_mac_get_fw_stats(). Those two helpers are basically doing
the same, except for:

1. ath11k_mac_get_fw_stats() verifies ar->state inside itself.
2. ath11k_mac_get_fw_stats() calls ath11k_mac_fw_stats_request()
   which then calls ath11k_mac_fw_stats_reset() to free pdev/vdev
   stats whereas only pdev stats are freed by ath11k_fw_stats_request().
3. ath11k_mac_get_fw_stats() waits for ar->fw_stats_complete and
   ar->fw_stats_done, whereas ath11k_fw_stats_request() only waits for
   ar->fw_stats_complete.

Change to call ath11k_mac_get_fw_stats() in ath11k_mac_op_get_txpower().
This is valid because:

1. ath11k_mac_op_get_txpower() also has the same request on ar->state.
2. it is harmless to call ath11k_fw_stats_vdevs_free() since
   ar->fw_stats.vdevs should be empty and there should be no one
   expecting it at that time.
3. ath11k_mac_op_get_txpower() only needs pdev stats. For pdev stats,
   ar->fw_stats_done is set to true whenever ar->fw_stats_complete is
   set to true in ath11k_update_stats_event(). So additional wait on
   ar->fw_stats_done does not wast any time.

Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.37

Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250220082448.31039-8-quic_bqiang@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>

wifi: ath11k: move locking outside of ath11k_mac_get_fw_stats()

Currently ath11k_mac_get_fw_stats() is acquiring/releasing ar->conf_mutex by itself.
In order to reuse this function in a context where that lock is already taken, move
lock handling to its callers, then the function itself only has to assert it.

There is only one caller now, i.e., ath11k_mac_op_sta_statistics(), so add lock handling
there.

Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.37

Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250220082448.31039-7-quic_bqiang@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>

wifi: ath11k: adjust unlock sequence in ath11k_update_stats_event()

Currently RCU lock and ar->data_lock are acquired in a sequence of

rcu_read_lock()
spin_lock_bh(&ar->data_lock)

but released in a sequence of

rcu_read_unlock()
spin_unlock_bh(&ar->data_lock)

Although there are no apparent issues with this, reorder them to
achieve symmetry.

Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.37

Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Acked-by: Kalle Valo <kvalo@kernel.org>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250220082448.31039-6-quic_bqiang@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>

wifi: ath11k: move some firmware stats related functions outside of debugfs

Commit b488c766442f ("ath11k: report rssi of each chain to mac80211 for QCA6390/WCN6855")
and commit c3b39553fc77 ("ath11k: add signal report to mac80211 for QCA6390 and WCN6855")
call debugfs functions in mac ops. Those functions are no-ops if CONFIG_ATH11K_DEBUGFS is
not enabled, thus cause wrong status reported.

Move them to mac.c.

Besides, since WMI_REQUEST_RSSI_PER_CHAIN_STAT and WMI_REQUEST_VDEV_STAT stats could also
be requested via mac ops, process them directly in ath11k_update_stats_event().

Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.37

Fixes: b488c766442f ("ath11k: report rssi of each chain to mac80211 for QCA6390/WCN6855")
Fixes: c3b39553fc77 ("ath11k: add signal report to mac80211 for QCA6390 and WCN6855")
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250220082448.31039-5-quic_bqiang@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>

wifi: ath11k: don't wait when there is no vdev started

For WMI_REQUEST_VDEV_STAT request, firmware might split response into
multiple events dut to buffer limit, hence currently in
ath11k_debugfs_fw_stats_process() we wait until all events received.
In case there is no vdev started, this results in that below condition
would never get satisfied

((++ar->fw_stats.num_vdev_recvd) == total_vdevs_started)

finally the requestor would be blocked until wait time out.

The same applies to WMI_REQUEST_BCN_STAT request as well due to:

((++ar->fw_stats.num_bcn_recvd) == ar->num_started_vdevs)

Change to check the number of started vdev first: if it is zero, finish
wait directly; if not, follow the old way.

Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.37

Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices")
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250220082448.31039-4-quic_bqiang@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>

wifi: ath11k: don't use static variables in ath11k_debugfs_fw_stats_process()

Currently ath11k_debugfs_fw_stats_process() is using static variables to count
firmware stat events. Taking num_vdev as an example, if for whatever reason (
say ar->num_started_vdevs is 0 or firmware bug etc.) the following condition

(++num_vdev) == total_vdevs_started

is not met, is_end is not set thus num_vdev won't be cleared. Next time when
firmware stats is requested again, even if everything is working fine, we will
fail due to the condition above will never be satisfied.

The same applies to num_bcn as well.

Change to use non-static counters so that we have a chance to clear them each
time firmware stats is requested. Currently only ath11k_fw_stats_request() and
ath11k_debugfs_fw_stats_request() are requesting firmware stats, so clear
counters there.

Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.37

Fixes: da3a9d3c1576 ("ath11k: refactor debugfs code into debugfs.c")
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Acked-by: Kalle Valo <kvalo@kernel.org>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250220082448.31039-3-quic_bqiang@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>

wifi: ath11k: avoid burning CPU in ath11k_debugfs_fw_stats_request()

We get report [1] that CPU is running a hot loop in
ath11k_debugfs_fw_stats_request():

94.60%     0.00%  i3status         [kernel.kallsyms]                 [k] do_syscall_64
        |
         --94.60%--do_syscall_64
                   |
                    --94.55%--__sys_sendmsg
                              ___sys_sendmsg
                              ____sys_sendmsg
                              netlink_sendmsg
                              netlink_unicast
                              genl_rcv
                              netlink_rcv_skb
                              genl_rcv_msg
                              |
                               --94.55%--genl_family_rcv_msg_dumpit
                                         __netlink_dump_start
                                         netlink_dump
                                         genl_dumpit
                                         nl80211_dump_station
                                         |
                                          --94.55%--ieee80211_dump_station
                                                    sta_set_sinfo
                                                    |
                                                     --94.55%--ath11k_mac_op_sta_statistics
                                                               ath11k_debugfs_get_fw_stats
                                                               |
                                                                --94.55%--ath11k_debugfs_fw_stats_request
                                                                          |
                                                                          |--41.73%--_raw_spin_lock_bh
                                                                          |
                                                                          |--22.74%--__local_bh_enable_ip
                                                                          |
                                                                          |--9.22%--_raw_spin_unlock_bh
                                                                          |
                                                                           --6.66%--srso_alias_safe_ret

This is because, if for whatever reason ar->fw_stats_done is not set by
ath11k_update_stats_event(), ath11k_debugfs_fw_stats_request() won't yield
CPU before an up to 3s timeout.

Change to completion mechanism to avoid CPU burning.

Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.37

Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices")
Reported-by: Yury Vostrikov <mon@unformed.ru>
Closes: https://lore.kernel.org/all/7324ac7a-8b7a-42a5-aa19-de52138ff638@app.fastmail.com/ # [1]
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250220082448.31039-2-quic_bqiang@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>

wil6210: fix support for sparrow chipsets

the wil6210 driver irq handling code is unconditionally writing
edma irq registers which are supposed to be only used on Talyn chipsets.
This however leade to a chipset hang on the older sparrow chipset
generation and firmware will not even boot.
Fix that by simply checking for edma support before handling these
registers.

Tested on Netgear R9000

Signed-off-by: Sebastian Gottschall <s.gottschall@dd-wrt.com>
Link: https://patch.msgid.link/20250304012131.25970-2-s.gottschall@dd-wrt.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>

wifi: ath10k: Avoid vdev delete timeout when firmware is already down

In some scenarios, the firmware may be stopped before the interface is
removed, either due to a crash or because the remoteproc (e.g., MPSS)
is shut down early during system reboot or shutdown.

This leads to a delay during interface teardown, as the driver waits for
a vdev delete response that never arrives, eventually timing out.

Example (SNOC):
$ echo stop > /sys/class/remoteproc/remoteproc0/state
[ 71.64] remoteproc remoteproc0: stopped remote processor modem
$ reboot
[ 74.84] ath10k_snoc c800000.wifi: failed to transmit packet, dropping: -108
[ 74.84] ath10k_snoc c800000.wifi: failed to submit frame: -108
[...]
[ 82.39] ath10k_snoc c800000.wifi: Timeout in receiving vdev delete response

To avoid this, skip waiting for the vdev delete response if the firmware is
already marked as unreachable (`ATH10K_FLAG_CRASH_FLUSH`), similar to how
`ath10k_mac_wait_tx_complete()` and `ath10k_vdev_setup_sync()` handle this case.

Signed-off-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Link: https://patch.msgid.link/20250522131704.612206-1-loic.poulain@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>

ath10k: snoc: fix unbalanced IRQ enable in crash recovery

In ath10k_snoc_hif_stop() we skip disabling the IRQs in the crash
recovery flow, but we still unconditionally call enable again in
ath10k_snoc_hif_start().

We can't check the ATH10K_FLAG_CRASH_FLUSH bit since it is cleared
before hif_start() is called, so instead check the
ATH10K_SNOC_FLAG_RECOVERY flag and skip enabling the IRQs during crash
recovery.

This fixes unbalanced IRQ enable splats that happen after recovering from
a crash.

Fixes: 0e622f67e041 ("ath10k: add support for WCN3990 firmware crash recovery")
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Tested-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Link: https://patch.msgid.link/20250318205043.1043148-1-caleb.connolly@linaro.org
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>

net: enetc: fix the netc-lib driver build dependency

The kernel robot reported the following errors when the netc-lib driver
was compiled as a loadable module and the enetc-core driver was built-in.

ld.lld: error: undefined symbol: ntmp_init_cbdr
referenced by enetc_cbdr.c:88 (drivers/net/ethernet/freescale/enetc/enetc_cbdr.c:88)
ld.lld: error: undefined symbol: ntmp_free_cbdr
referenced by enetc_cbdr.c:96 (drivers/net/ethernet/freescale/enetc/enetc_cbdr.c:96)

Simply changing "tristate" to "bool" can fix this issue, but considering
that the netc-lib driver needs to support being compiled as a loadable
module and LS1028 does not need the netc-lib driver. Therefore, we add a
boolean symbol 'NXP_NTMP' to enable 'NXP_NETC_LIB' as needed. And when
adding NETC switch driver support in the future, there is no need to
modify the dependency, just select "NXP_NTMP" and "NXP_NETC_LIB" at the
same time.

Reported-by: Arnd Bergmann <arnd@kernel.org>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202505220734.x6TF6oHR-lkp@intel.com/
Fixes: 4701073c3deb ("net: enetc: add initial netc-lib driver to support NTMP")
Suggested-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ptp: remove ptp->n_vclocks check logic in ptp_vclock_in_use()

There is no disagreement that we should check both ptp->is_virtual_clock
and ptp->n_vclocks to check if the ptp virtual clock is in use.

However, when we acquire ptp->n_vclocks_mux to read ptp->n_vclocks in
ptp_vclock_in_use(), we observe a recursive lock in the call trace
starting from n_vclocks_store().

============================================
WARNING: possible recursive locking detected
6.15.0-rc6 #1 Not tainted
--------------------------------------------
syz.0.1540/13807 is trying to acquire lock:
ffff888035a24868 (&ptp->n_vclocks_mux){+.+.}-{4:4}, at:
ptp_vclock_in_use drivers/ptp/ptp_private.h:103 [inline]
ffff888035a24868 (&ptp->n_vclocks_mux){+.+.}-{4:4}, at:
ptp_clock_unregister+0x21/0x250 drivers/ptp/ptp_clock.c:415

but task is already holding lock:
ffff888030704868 (&ptp->n_vclocks_mux){+.+.}-{4:4}, at:
n_vclocks_store+0xf1/0x6d0 drivers/ptp/ptp_sysfs.c:215

other info that might help us debug this:
Possible unsafe locking scenario:

       CPU0
       ----
  lock(&ptp->n_vclocks_mux);
  lock(&ptp->n_vclocks_mux);

*** DEADLOCK ***
....
============================================

The best way to solve this is to remove the logic that checks
ptp->n_vclocks in ptp_vclock_in_use().

The reason why this is appropriate is that any path that uses
ptp->n_vclocks must unconditionally check if ptp->n_vclocks is greater
than 0 before unregistering vclocks, and all functions are already
written this way. And in the function that uses ptp->n_vclocks, we
already get ptp->n_vclocks_mux before unregistering vclocks.

Therefore, we need to remove the redundant check for ptp->n_vclocks in
ptp_vclock_in_use() to prevent recursive locking.

Fixes: 73f37068d540 ("ptp: support ptp physical/virtual clocks conversion")
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Link: https://patch.msgid.link/20250520160717.7350-1-aha310510@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: dsa: b53: fix untagged traffic sent via cpu tagged with VID 0

When Linux sends out untagged traffic from a port, it will enter the CPU
port without any VLAN tag, even if the port is a member of a vlan
filtering bridge with a PVID egress untagged VLAN.

This makes the CPU port's PVID take effect, and the PVID's VLAN
table entry controls if the packet will be tagged on egress.

Since commit 45e9d59d3950 ("net: dsa: b53: do not allow to configure
VLAN 0") we remove bridged ports from VLAN 0 when joining or leaving a
VLAN aware bridge. But we also clear the untagged bit, causing untagged
traffic from the controller to become tagged with VID 0 (and priority
0).

Fix this by not touching the untagged map of VLAN 0. Additionally,
always keep the CPU port as a member, as the untag map is only effective
as long as there is at least one member, and we would remove it when
bridging all ports and leaving no standalone ports.

Since Linux (and the switch) treats VLAN 0 tagged traffic like untagged,
the actual impact of this is rather low, but this also prevented earlier
detection of the issue.

Fixes: 45e9d59d3950 ("net: dsa: b53: do not allow to configure VLAN 0")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/20250602194914.1011890-1-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'net-6.16-rc1' of git://git./linux/kernel/git/netdev/net

Pull networking fixes from Jakub Kicinski:
"Including fixes from CAN, wireless, Bluetooth, and Netfilter.

  Current release - regressions:

   - Revert "kunit: configs: Enable CONFIG_INIT_STACK_ALL_PATTERN in
     all_tests", makes kunit error out if compiler is old

   - wifi: iwlwifi: mvm: fix assert on suspend

   - rxrpc: fix return from none_validate_challenge()

  Current release - new code bugs:

   - ovpn: couple of fixes for socket cleanup and UDP-tunnel teardown

   - can: kvaser_pciefd: refine error prone echo_skb_max handling logic

   - fix net_devmem_bind_dmabuf() stub when DEVMEM not compiled

   - eth: airoha: fixes for config / accel in bridge mode

  Previous releases - regressions:

   - Bluetooth: hci_qca: move the SoC type check to the right place, fix
     GPIO integration

   - prevent a NULL deref in rtnl_create_link() after locking changes

   - fix udp gso skb_segment after pull from frag_list

   - hv_netvsc: fix potential deadlock in netvsc_vf_setxdp()

  Previous releases - always broken:

   - netfilter:
       - nf_nat: also check reverse tuple to obtain clashing entry
       - nf_set_pipapo_avx2: fix initial map fill (zeroing)

   - fix the helper for incremental update of packet checksums after
     modifying the IP address, used by ILA and BPF

   - eth:
       - stmmac: prevent div by 0 when clock rate is misconfigured
       - ice: fix Tx scheduler handling of XDP and changing queue count
       - eth: fix support for the RGMII interface when delays configured"

* tag 'net-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (76 commits)
  calipso: unlock rcu before returning -EAFNOSUPPORT
  seg6: Fix validation of nexthop addresses
  net: prevent a NULL deref in rtnl_create_link()
  net: annotate data-races around cleanup_net_task
  selftests: drv-net: tso: make bkg() wait for socat to quit
  selftests: drv-net: tso: fix the GRE device name
  selftests: drv-net: add configs for the TSO test
  wireguard: device: enable threaded NAPI
  netlink: specs: rt-link: decode ip6gre
  netlink: specs: rt-link: add missing byte-order properties
  net: wwan: mhi_wwan_mbim: use correct mux_id for multiplexing
  wifi: cfg80211/mac80211: correctly parse S1G beacon optional elements
  net: dsa: b53: do not touch DLL_IQQD on bcm53115
  net: dsa: b53: allow RGMII for bcm63xx RGMII ports
  net: dsa: b53: do not configure bcm63xx's IMP port interface
  net: dsa: b53: do not enable RGMII delay on bcm63xx
  net: dsa: b53: do not enable EEE on bcm63xx
  net: ti: icssg-prueth: Fix swapped TX stats for MII interfaces.
  selftests: netfilter: nft_nat.sh: add test for reverse clash with nat
  netfilter: nf_nat: also check reverse tuple to obtain clashing entry
  ...

MAINTAINERS: add entry for crypto library

I am volunteering to maintain the kernel's crypto library code.

[ And Jason and Ard piped up too - Linus ]

Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Bluetooth: MGMT: Protect mgmt_pending list with its own lock

This uses a mutex to protect from concurrent access of mgmt_pending
list which can cause crashes like:

==================================================================
BUG: KASAN: slab-use-after-free in hci_sock_get_channel+0x60/0x68 net/bluetooth/hci_sock.c:91
Read of size 2 at addr ffff0000c48885b2 by task syz.4.334/7318

CPU: 0 UID: 0 PID: 7318 Comm: syz.4.334 Not tainted 6.15.0-rc7-syzkaller-g187899f4124a #0 PREEMPT
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2025
Call trace:
show_stack+0x2c/0x3c arch/arm64/kernel/stacktrace.c:466 (C)
__dump_stack+0x30/0x40 lib/dump_stack.c:94
dump_stack_lvl+0xd8/0x12c lib/dump_stack.c:120
print_address_description+0xa8/0x254 mm/kasan/report.c:408
print_report+0x68/0x84 mm/kasan/report.c:521
kasan_report+0xb0/0x110 mm/kasan/report.c:634
__asan_report_load2_noabort+0x20/0x2c mm/kasan/report_generic.c:379
hci_sock_get_channel+0x60/0x68 net/bluetooth/hci_sock.c:91
mgmt_pending_find+0x7c/0x140 net/bluetooth/mgmt_util.c:223
pending_find net/bluetooth/mgmt.c:947 [inline]
remove_adv_monitor+0x44/0x1a4 net/bluetooth/mgmt.c:5445
hci_mgmt_cmd+0x780/0xc00 net/bluetooth/hci_sock.c:1712
hci_sock_sendmsg+0x544/0xbb0 net/bluetooth/hci_sock.c:1832
sock_sendmsg_nosec net/socket.c:712 [inline]
__sock_sendmsg net/socket.c:727 [inline]
sock_write_iter+0x25c/0x378 net/socket.c:1131
new_sync_write fs/read_write.c:591 [inline]
vfs_write+0x62c/0x97c fs/read_write.c:684
ksys_write+0x120/0x210 fs/read_write.c:736
__do_sys_write fs/read_write.c:747 [inline]
__se_sys_write fs/read_write.c:744 [inline]
__arm64_sys_write+0x7c/0x90 fs/read_write.c:744
__invoke_syscall arch/arm64/kernel/syscall.c:35 [inline]
invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:49
el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:132
do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:151
el0_svc+0x58/0x17c arch/arm64/kernel/entry-common.c:767
el0t_64_sync_handler+0x78/0x108 arch/arm64/kernel/entry-common.c:786
el0t_64_sync+0x198/0x19c arch/arm64/kernel/entry.S:600

Allocated by task 7037:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x40/0x78 mm/kasan/common.c:68
kasan_save_alloc_info+0x44/0x54 mm/kasan/generic.c:562
poison_kmalloc_redzone mm/kasan/common.c:377 [inline]
__kasan_kmalloc+0x9c/0xb4 mm/kasan/common.c:394
kasan_kmalloc include/linux/kasan.h:260 [inline]
__do_kmalloc_node mm/slub.c:4327 [inline]
__kmalloc_noprof+0x2fc/0x4c8 mm/slub.c:4339
kmalloc_noprof include/linux/slab.h:909 [inline]
sk_prot_alloc+0xc4/0x1f0 net/core/sock.c:2198
sk_alloc+0x44/0x3ac net/core/sock.c:2254
bt_sock_alloc+0x4c/0x300 net/bluetooth/af_bluetooth.c:148
hci_sock_create+0xa8/0x194 net/bluetooth/hci_sock.c:2202
bt_sock_create+0x14c/0x24c net/bluetooth/af_bluetooth.c:132
__sock_create+0x43c/0x91c net/socket.c:1541
sock_create net/socket.c:1599 [inline]
__sys_socket_create net/socket.c:1636 [inline]
__sys_socket+0xd4/0x1c0 net/socket.c:1683
__do_sys_socket net/socket.c:1697 [inline]
__se_sys_socket net/socket.c:1695 [inline]
__arm64_sys_socket+0x7c/0x94 net/socket.c:1695
__invoke_syscall arch/arm64/kernel/syscall.c:35 [inline]
invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:49
el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:132
do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:151
el0_svc+0x58/0x17c arch/arm64/kernel/entry-common.c:767
el0t_64_sync_handler+0x78/0x108 arch/arm64/kernel/entry-common.c:786
el0t_64_sync+0x198/0x19c arch/arm64/kernel/entry.S:600

Freed by task 6607:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x40/0x78 mm/kasan/common.c:68
kasan_save_free_info+0x58/0x70 mm/kasan/generic.c:576
poison_slab_object mm/kasan/common.c:247 [inline]
__kasan_slab_free+0x68/0x88 mm/kasan/common.c:264
kasan_slab_free include/linux/kasan.h:233 [inline]
slab_free_hook mm/slub.c:2380 [inline]
slab_free mm/slub.c:4642 [inline]
kfree+0x17c/0x474 mm/slub.c:4841
sk_prot_free net/core/sock.c:2237 [inline]
__sk_destruct+0x4f4/0x760 net/core/sock.c:2332
sk_destruct net/core/sock.c:2360 [inline]
__sk_free+0x320/0x430 net/core/sock.c:2371
sk_free+0x60/0xc8 net/core/sock.c:2382
sock_put include/net/sock.h:1944 [inline]
mgmt_pending_free+0x88/0x118 net/bluetooth/mgmt_util.c:290
mgmt_pending_remove+0xec/0x104 net/bluetooth/mgmt_util.c:298
mgmt_set_powered_complete+0x418/0x5cc net/bluetooth/mgmt.c:1355
hci_cmd_sync_work+0x204/0x33c net/bluetooth/hci_sync.c:334
process_one_work+0x7e8/0x156c kernel/workqueue.c:3238
process_scheduled_works kernel/workqueue.c:3319 [inline]
worker_thread+0x958/0xed8 kernel/workqueue.c:3400
kthread+0x5fc/0x75c kernel/kthread.c:464
ret_from_fork+0x10/0x20 arch/arm64/kernel/entry.S:847

Fixes: a380b6cff1a2 ("Bluetooth: Add generic mgmt helper API")
Closes: https://syzkaller.appspot.com/bug?extid=0a7039d5d9986ff4ecec
Closes: https://syzkaller.appspot.com/bug?extid=cc0cc52e7f43dc9e6df1
Reported-by: syzbot+0a7039d5d9986ff4ecec@syzkaller.appspotmail.com
Tested-by: syzbot+0a7039d5d9986ff4ecec@syzkaller.appspotmail.com
Tested-by: syzbot+cc0cc52e7f43dc9e6df1@syzkaller.appspotmail.com
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Bluetooth: MGMT: Fix UAF on mgmt_remove_adv_monitor_complete

This reworks MGMT_OP_REMOVE_ADV_MONITOR to not use mgmt_pending_add to
avoid crashes like bellow:

==================================================================
BUG: KASAN: slab-use-after-free in mgmt_remove_adv_monitor_complete+0xe5/0x540 net/bluetooth/mgmt.c:5406
Read of size 8 at addr ffff88801c53f318 by task kworker/u5:5/5341

CPU: 0 UID: 0 PID: 5341 Comm: kworker/u5:5 Not tainted 6.15.0-syzkaller-10402-g4cb6c8af8591 #0 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
Workqueue: hci0 hci_cmd_sync_work
Call Trace:
<TASK>
dump_stack_lvl+0x189/0x250 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:408 [inline]
print_report+0xd2/0x2b0 mm/kasan/report.c:521
kasan_report+0x118/0x150 mm/kasan/report.c:634
mgmt_remove_adv_monitor_complete+0xe5/0x540 net/bluetooth/mgmt.c:5406
hci_cmd_sync_work+0x261/0x3a0 net/bluetooth/hci_sync.c:334
process_one_work kernel/workqueue.c:3238 [inline]
process_scheduled_works+0xade/0x17b0 kernel/workqueue.c:3321
worker_thread+0x8a0/0xda0 kernel/workqueue.c:3402
kthread+0x711/0x8a0 kernel/kthread.c:464
ret_from_fork+0x3fc/0x770 arch/x86/kernel/process.c:148
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
</TASK>

Allocated by task 5987:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x3e/0x80 mm/kasan/common.c:68
poison_kmalloc_redzone mm/kasan/common.c:377 [inline]
__kasan_kmalloc+0x93/0xb0 mm/kasan/common.c:394
kasan_kmalloc include/linux/kasan.h:260 [inline]
__kmalloc_cache_noprof+0x230/0x3d0 mm/slub.c:4358
kmalloc_noprof include/linux/slab.h:905 [inline]
kzalloc_noprof include/linux/slab.h:1039 [inline]
mgmt_pending_new+0x65/0x240 net/bluetooth/mgmt_util.c:252
mgmt_pending_add+0x34/0x120 net/bluetooth/mgmt_util.c:279
remove_adv_monitor+0x103/0x1b0 net/bluetooth/mgmt.c:5454
hci_mgmt_cmd+0x9c9/0xef0 net/bluetooth/hci_sock.c:1719
hci_sock_sendmsg+0x6ca/0xef0 net/bluetooth/hci_sock.c:1839
sock_sendmsg_nosec net/socket.c:712 [inline]
__sock_sendmsg+0x219/0x270 net/socket.c:727
sock_write_iter+0x258/0x330 net/socket.c:1131
new_sync_write fs/read_write.c:593 [inline]
vfs_write+0x548/0xa90 fs/read_write.c:686
ksys_write+0x145/0x250 fs/read_write.c:738
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f

Freed by task 5989:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x3e/0x80 mm/kasan/common.c:68
kasan_save_free_info+0x46/0x50 mm/kasan/generic.c:576
poison_slab_object mm/kasan/common.c:247 [inline]
__kasan_slab_free+0x62/0x70 mm/kasan/common.c:264
kasan_slab_free include/linux/kasan.h:233 [inline]
slab_free_hook mm/slub.c:2380 [inline]
slab_free mm/slub.c:4642 [inline]
kfree+0x18e/0x440 mm/slub.c:4841
mgmt_pending_foreach+0xc9/0x120 net/bluetooth/mgmt_util.c:242
mgmt_index_removed+0x10d/0x2f0 net/bluetooth/mgmt.c:9366
hci_sock_bind+0xbe9/0x1000 net/bluetooth/hci_sock.c:1314
__sys_bind_socket net/socket.c:1810 [inline]
__sys_bind+0x2c3/0x3e0 net/socket.c:1841
__do_sys_bind net/socket.c:1846 [inline]
__se_sys_bind net/socket.c:1844 [inline]
__x64_sys_bind+0x7a/0x90 net/socket.c:1844
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f

Fixes: 66bd095ab5d4 ("Bluetooth: advmon offload MSFT remove monitor")
Closes: https://syzkaller.appspot.com/bug?extid=feb0dc579bbe30a13190
Reported-by: syzbot+feb0dc579bbe30a13190@syzkaller.appspotmail.com
Tested-by: syzbot+feb0dc579bbe30a13190@syzkaller.appspotmail.com
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Bluetooth: btintel_pcie: Reduce driver buffer posting to prevent race condition

Modify the driver to post 3 fewer buffers than the maximum rx buffers
(64) allowed for the firmware. This change mitigates a hardware issue
causing a race condition in the firmware, improving stability and data
handling.

Signed-off-by: Chandrashekar Devegowda <chandrashekar.devegowda@intel.com>
Signed-off-by: Kiran K <kiran.k@intel.com>
Fixes: c2b636b3f788 ("Bluetooth: btintel_pcie: Add support for PCIe transport")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Bluetooth: btintel_pcie: Increase the tx and rx descriptor count

This change addresses latency issues observed in HID use cases where
events arrive in bursts. By increasing the Rx descriptor count to 64,
the firmware can handle bursty data more effectively, reducing latency
and preventing buffer overflows.

Signed-off-by: Chandrashekar Devegowda <chandrashekar.devegowda@intel.com>
Signed-off-by: Kiran K <kiran.k@intel.com>
Fixes: c2b636b3f788 ("Bluetooth: btintel_pcie: Add support for PCIe transport")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Bluetooth: btintel_pcie: Fix driver not posting maximum rx buffers

The driver was posting only 6 rx buffers, despite the maximum rx buffers
being defined as 16. Having fewer RX buffers caused firmware exceptions
in HID use cases when events arrived in bursts.

Exception seen on android 6.12 kernel.

E Bluetooth: hci0: Received hw exception interrupt
E Bluetooth: hci0: Received gp1 mailbox interrupt
D Bluetooth: hci0: 00000000: ff 3e 87 80 03 01 01 01 03 01 0c 0d 02 1c 10 0e
D Bluetooth: hci0: 00000010: 01 00 05 14 66 b0 28 b0 c0 b0 28 b0 ac af 28 b0
D Bluetooth: hci0: 00000020: 14 f1 28 b0 00 00 00 00 fa 04 00 00 00 00 40 10
D Bluetooth: hci0: 00000030: 08 00 00 00 7a 7a 7a 7a 47 00 fb a0 10 00 00 00
D Bluetooth: hci0: 00000000: 10 01 0a
E Bluetooth: hci0: ---- Dump of debug registers —
E Bluetooth: hci0: boot stage: 0xe0fb0047
E Bluetooth: hci0: ipc status: 0x00000004
E Bluetooth: hci0: ipc control: 0x00000000
E Bluetooth: hci0: ipc sleep control: 0x00000000
E Bluetooth: hci0: mbox_1: 0x00badbad
E Bluetooth: hci0: mbox_2: 0x0000101c
E Bluetooth: hci0: mbox_3: 0x00000008
E Bluetooth: hci0: mbox_4: 0x7a7a7a7a

Signed-off-by: Chandrashekar Devegowda <chandrashekar.devegowda@intel.com>
Signed-off-by: Kiran K <kiran.k@intel.com>
Fixes: c2b636b3f788 ("Bluetooth: btintel_pcie: Add support for PCIe transport")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Bluetooth: hci_core: fix list_for_each_entry_rcu usage

Releasing + re-acquiring RCU lock inside list_for_each_entry_rcu() loop
body is not correct.

Fix by taking the update-side hdev->lock instead.

Fixes: c7eaf80bfb0c ("Bluetooth: Fix hci_link_tx_to RCU lock usage")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Merge tag 'uml-for-linux-6.16-rc1' of git://git./linux/kernel/git/uml/linux

Pull UML updates from Johannes Berg:
"The only really new thing is the long-standing seccomp work
  (originally from 2021!). Wven if it still isn't enabled by default due
  to security concerns it can still be used e.g. for tests.

   - remove obsolete network transports

   - remove PCI IO port support

   - start adding seccomp-based process handling instead of ptrace"

* tag 'uml-for-linux-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux: (29 commits)
  um: remove "extern" from implementation of sigchld_handler
  um: fix unused variable warning
  um: fix SECCOMP 32bit xstate register restore
  um: pass FD for memory operations when needed
  um: Add SECCOMP support detection and initialization
  um: Implement kernel side of SECCOMP based process handling
  um: Track userspace children dying in SECCOMP mode
  um: Add helper functions to get/set state for SECCOMP
  um: Add stub side of SECCOMP/futex based process handling
  um: Move faultinfo extraction into userspace routine
  um: vector: Use mac_pton() for MAC address parsing
  um: vector: Clean up and modernize log messages
  um: chan_kern: use raw spinlock for irqs_to_free_lock
  MAINTAINERS: remove obsolete file entry in TUN/TAP DRIVER
  um: Fix tgkill compile error on old host OSes
  um: stop using PCI port I/O
  um: Remove legacy network transport infrastructure
  um: vector: Eliminate the dependency on uml_net
  um: Remove obsolete legacy network transports
  um/asm: Replace "REP; NOP" with PAUSE mnemonic
  ...

Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux

Pull arm64 fixes from Will Deacon:
"We've got a couple of build fixes when using LLD, a missing TLB
  invalidation and a workaround for broken firmware on SoCs with CPUs
  that implement MPAM:

   - Disable problematic linker assertions for broken versions of LLD

   - Work around sporadic link failure with LLD and various randconfig
     builds

   - Fix missing invalidation in the TLB batching code when reclaim
     races with mprotect() and friends

   - Add a command-line override for MPAM to allow booting on systems
     with broken firmware"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: Add override for MPAM
  arm64/mm: Close theoretical race where stale TLB entry remains valid
  arm64: Work around convergence issue with LLD linker
  arm64: Disable LLD linker ASSERT()s for the time being

Merge tag 'for-linus' of git://git./linux/kernel/git/rmk/linux

Pull ARM fixes from Russell King:

- Fix arch_memremap_can_ram_remap() which incorrectly passed a PFN to
   memblock_is_map_memory rather than the actual address.

- Disallow kernel mode NEON when IRQs are disabled

   Explanation:

     "To avoid having to preserve/restore kernel mode NEON state when
      such a softirq is taken softirqs are now disabled when using the
      NEON from task context."

   should explain that it's nested kernel mode.

   In other words, softirqs from user mode are fine, because the context
   will be preserved. softirqs from kernel mode may be from a context
   that has already saved the user NEON state, and thus we would need to
   preserve the NEON state for the parent kernel mode context, and this
   we don't allow.

   The problem occurs when the kernel context disables hard IRQs, and
   then uses NEON. When it's finished, and restores the userspace NEON
   state, we call local_bh_enable() with hard IRQs disabled, which
   causes a warning.

   This commit addresses that by disallowing the use of NEON with hard
   IRQs disabled.

https://lore.kernel.org/all/20250516231858.27899-4-ebiggers@kernel.org/T/#m104841b6e9346b1814c8b0fb9f2340551b0cd3e8

   has some further context

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux:
  ARM: 9446/1: Disallow kernel mode NEON when IRQs are disabled
  ARM: 9447/1: arm/memremap: fix arch_memremap_can_ram_remap()

Merge tag 'rtc-6.16' of git://git./linux/kernel/git/abelloni/linux

Pull RTC updates from Alexandre Belloni:
"There are two new drivers this cycle. There is also support for a
  negative offset for RTCs that have been shipped with a date set using
  an epoch that is before 1970. This unfortunately happens with some
  products that ship with a vendor kernel and an out of tree driver.

  Core:
   - support negative offsets for RTCs that have shipped with an epoch
     earlier than 1970

  New drivers:
   - NXP S32G2/S32G3
   - Sophgo CV1800

  Drivers:
   - loongson: fix missing alarm notifications for ACPI
   - m41t80: kickstart ocillator upon failure
   - mt6359: mt6357 support
   - pcf8563: fix wrong alarm register
   - sh: cleanups"

* tag 'rtc-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (39 commits)
  rtc: mt6359: Add mt6357 support
  rtc: test: Test date conversion for dates starting in 1900
  rtc: test: Also test time and wday outcome of rtc_time64_to_tm()
  rtc: test: Emit the seconds-since-1970 value instead of days-since-1970
  rtc: Fix offset calculation for .start_secs < 0
  rtc: Make rtc_time64_to_tm() support dates before 1970
  rtc: pcf8563: fix wrong alarm register
  rtc: rzn1: support input frequencies other than 32768Hz
  rtc: rzn1: Disable controller before initialization
  dt-bindings: rtc: rzn1: add optional second clock
  rtc: m41t80: reduce verbosity
  rtc: m41t80: kickstart ocillator upon failure
  rtc: s32g: add NXP S32G2/S32G3 SoC support
  dt-bindings: rtc: add schema for NXP S32G2/S32G3 SoCs
  dt-bindings: at91rm9260-rtt: add microchip,sama7d65-rtt
  dt-bindings: rtc: at91rm9200: add microchip,sama7d65-rtc
  rtc: loongson: Add missing alarm notifications for ACPI RTC events
  rtc: sophgo: add rtc support for Sophgo CV1800 SoC
  rtc: stm32: drop unused module alias
  rtc: s3c: drop unused module alias
  ...

Merge tag 'dmaengine-6.16-rc1' of git://git./linux/kernel/git/vkoul/dmaengine

Pull dmaengine updates from Vinod Koul:
"A fairly small update for the dmaengine subsystem. This has a new ARM
  dmaengine driver and couple of new device support and few driver
  changes:

  New support:
   - Renesas RZ/V2H(P) dma support for r9a09g057
   - Arm DMA-350 driver
   - Tegra Tegra264 ADMA support

  Updates:
   - AMD ptdma driver code removal and optimizations
   - Freescale edma error interrupt handler support"

* tag 'dmaengine-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (27 commits)
  dmaengine: idxd: Remove unused pointer and macro
  arm64: dts: renesas: r9a09g057: Add DMAC nodes
  dmaengine: sh: rz-dmac: Add RZ/V2H(P) support
  dmaengine: sh: rz-dmac: Allow for multiple DMACs
  irqchip/renesas-rzv2h: Add rzv2h_icu_register_dma_req()
  dt-bindings: dma: rz-dmac: Document RZ/V2H(P) family of SoCs
  dt-bindings: dma: rz-dmac: Restrict properties for RZ/A1H
  dmaengine: idxd: Narrow the restriction on BATCH to ver. 1 only
  dmaengine: ti: Add NULL check in udma_probe()
  fsldma: Set correct dma_mask based on hw capability
  dmaengine: idxd: Check availability of workqueue allocated by idxd wq driver before using
  dmaengine: xilinx_dma: Set dma_device directions
  dmaengine: tegra210-adma: Add Tegra264 support
  dt-bindings: Document Tegra264 ADMA support
  dmaengine: dw-edma: Add HDMA NATIVE map check
  dmaegnine: fsl-edma: add edma error interrupt handler
  dt-bindings: dma: fsl-edma: increase maxItems of interrupts and interrupt-names
  dmaengine: ARM_DMA350 should depend on ARM/ARM64
  dt-bindings: dma: qcom,bam: Document dma-coherent property
  dmaengine: Add Arm DMA-350 driver
  ...

Merge tag 'phy-for-6.16' of git://git./linux/kernel/git/phy/linux-phy

Pull phy updates from Vinod Koul:
"As usual featuring couple of new driver and bunch of new device
  support and some driver changes to Freescale, rockchip driver along
  with couple of yaml binding conversions.

  New Support:
   - Qualcomm IPQ5424 qusb2 support, IPQ5018 uniphy-pcie driver
   - Rockchip usb2 support for RK3562, RK3036 usb2 phy support
   - Samsung exynos2200 eusb2 phy support and driver refactoring for
     this support, exynos7870 USBDRD support
   - Mediatek MT7988 xs-phy support
   - Broadcom BCM74110 usb phy support
   - Renesas RZ/V2H(P) usb2 phy support

  Updates:
   - Freescale phy rate claculation updates, i.MX95 tuning support
   - Better error handling for amlogic pcie phy
   - Rockchip color depth configuration and management support
   - Yaml binding conversion for RK3399 Type-C and PCIe Phy"

* tag 'phy-for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (77 commits)
  phy: tegra: p2u: Broaden architecture dependency
  phy: rockchip: inno-usb2: Add usb2 phy support for rk3562
  dt-bindings: phy: rockchip,inno-usb2phy: add rk3562
  phy: rockchip: inno-usb2: add phy definition for rk3036
  dt-bindings: phy: rockchip,inno-usb2phy: add rk3036 compatible
  phy: freescale: fsl-samsung-hdmi: Improve LUT search for best clock
  phy: freescale: fsl-samsung-hdmi: Refactor finding PHY settings
  phy: freescale: fsl-samsung-hdmi: Rename phy_clk_round_rate
  phy: renesas: phy-rcar-gen3-usb2: Add USB2.0 PHY support for RZ/V2H(P)
  phy: renesas: phy-rcar-gen3-usb2: Sort compatible entries by SoC part number
  dt-bindings: phy: renesas,usb2-phy: Document RZ/V2H(P) SoC
  dt-bindings: phy: renesas,usb2-phy: Add clock constraint for RZ/G2L family
  phy: exynos5-usbdrd: support Exynos USBDRD 3.2 4nm controller
  phy: phy-snps-eusb2: add support for exynos2200
  phy: phy-snps-eusb2: refactor reference clock init
  phy: phy-snps-eusb2: make reset control optional
  phy: phy-snps-eusb2: make repeater optional
  phy: phy-snps-eusb2: split phy init code
  phy: phy-snps-eusb2: refactor constructs names
  phy: move phy-qcom-snps-eusb2 out of its vendor sub-directory
  ...

Merge tag 'soundwire-6.16-rc1' of git://git./linux/kernel/git/vkoul/soundwire

Pull soundwire updates from Vinod Koul:
"A couple of small core changes and an Intel driver change:

   - sdw_assign_device_num() logic simplification, using internal slave
     id for irqs and optimizing computing of port params in specific
     stream states

   - Intel driver updates for ACE3+ microphone privacy status reporting
     and enabling the status in HDA Intel driver"

* tag 'soundwire-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
  soundwire: only compute port params in specific stream states
  ASoC: SOF: Intel: hda: Set the mic_privacy flag for soundwire with ACE3+
  soundwire: intel: Add awareness of ACE3+ microphone privacy
  soundwire: bus: Add internal slave ID and use for IRQs
  soundwire: bus: Simplify sdw_assign_device_num()

calipso: unlock rcu before returning -EAFNOSUPPORT

syzbot reported that a recent patch forgot to unlock rcu
in the error path.

Adopt the convention that netlbl_conn_setattr() is already using.

Fixes: 6e9f2df1c550 ("calipso: Don't call calipso functions for AF_INET sk.")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Link: https://patch.msgid.link/20250604133826.1667664-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

seg6: Fix validation of nexthop addresses

The kernel currently validates that the length of the provided nexthop
address does not exceed the specified length. This can lead to the
kernel reading uninitialized memory if user space provided a shorter
length than the specified one.

Fix by validating that the provided length exactly matches the specified
one.

Fixes: d1df6fd8a1d2 ("ipv6: sr: define core operations for seg6local lightweight tunnel")
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250604113252.371528-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: prevent a NULL deref in rtnl_create_link()

At the time rtnl_create_link() is running, dev->netdev_ops is NULL,
we must not use netdev_lock_ops() or risk a NULL deref if
CONFIG_NET_SHAPER is defined.

Use netif_set_group() instead of dev_set_group().

RIP: 0010:netdev_need_ops_lock include/net/netdev_lock.h:33 [inline]
RIP: 0010:netdev_lock_ops include/net/netdev_lock.h:41 [inline]
RIP: 0010:dev_set_group+0xc0/0x230 net/core/dev_api.c:82
Call Trace:
<TASK>
  rtnl_create_link+0x748/0xd10 net/core/rtnetlink.c:3674
  rtnl_newlink_create+0x25c/0xb00 net/core/rtnetlink.c:3813
  __rtnl_newlink net/core/rtnetlink.c:3940 [inline]
  rtnl_newlink+0x16d6/0x1c70 net/core/rtnetlink.c:4055
  rtnetlink_rcv_msg+0x7cf/0xb70 net/core/rtnetlink.c:6944
  netlink_rcv_skb+0x208/0x470 net/netlink/af_netlink.c:2534
  netlink_unicast_kernel net/netlink/af_netlink.c:1313 [inline]
  netlink_unicast+0x75b/0x8d0 net/netlink/af_netlink.c:1339
  netlink_sendmsg+0x805/0xb30 net/netlink/af_netlink.c:1883
  sock_sendmsg_nosec net/socket.c:712 [inline]

Reported-by: syzbot+9fc858ba0312b42b577e@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/6840265f.a00a0220.d4325.0009.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Fixes: 7e4d784f5810 ("net: hold netdev instance lock during rtnetlink operations")
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250604105815.1516973-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: annotate data-races around cleanup_net_task

from_cleanup_net() reads cleanup_net_task locklessly.

Add READ_ONCE()/WRITE_ONCE() annotations to avoid
a potential KCSAN warning, even if the race is harmless.

Fixes: 0734d7c3d93c ("net: expedite synchronize_net() for cleanup_net()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://patch.msgid.link/20250604093928.1323333-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: drv-net: tso: make bkg() wait for socat to quit

Commit 846742f7e32f ("selftests: drv-net: add a warning for
bkg + shell + terminate") added a warning for bkg() used
with terminate=True. The tso test was missed as we didn't
have it running anywhere in NIPA. Add exit_wait=True, to avoid:

# Warning: combining shell and terminate is risky!
# SIGTERM may not reach the child on zsh/ksh!

getting printed twice for every variant.

Fixes: 0d0f4174f6c8 ("selftests: drv-net: add a simple TSO test")
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250604012055.891431-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: drv-net: tso: fix the GRE device name

The device type for IPv4 GRE is "gre" not "ipgre",
unlike for IPv6 which uses "ip6gre".

Not sure how I missed this when writing the test, perhaps
because all HW I have access to is on an IPv6-only network.

Fixes: 0d0f4174f6c8 ("selftests: drv-net: add a simple TSO test")
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250604012031.891242-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: drv-net: add configs for the TSO test

Add missing config options for the tso.py test, specifically
to make sure the kernel is built with vxlan and gre tunnels.

I noticed this while adding a TSO-capable device QEMU to the CI.
Previously we only run virtio tests and it doesn't report LSO
stats on the QEMU we have.

Fixes: 0d0f4174f6c8 ("selftests: drv-net: add a simple TSO test")
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250604001653.853008-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch '40GbE' of git://git./linux/kernel/git/tnguy/net-queue

Tony Nguyen says:

====================
iavf: get rid of the crit lock

Przemek Kitszel says:

Fix some deadlocks in iavf, and make it less error prone for the future.

Patch 1 is simple and independent from the rest.
Patches 2, 3, 4 are strictly a refactor, but it enables the last patch
to be much smaller.
(Technically Jake given his RB tags not knowing I will send it to -net).
Patch 5 just adds annotations, this also helps prove last patch to be correct.
Patch 6 removes the crit lock, with its unusual try_lock()s.

I have more refactoring for scheduling done for -next, to be sent soon.

There is a simple test:
add VF; decrease number of queueus; remove VF
that was way too hard to pass without this series :)

* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
  iavf: get rid of the crit lock
  iavf: sprinkle netdev_assert_locked() annotations
  iavf: extract iavf_watchdog_step() out of iavf_watchdog_task()
  iavf: simplify watchdog_task in terms of adminq task scheduling
  iavf: centralize watchdog requeueing itself
  iavf: iavf_suspend(): take RTNL before netdev_lock()
====================

Link: https://patch.msgid.link/20250603171710.2336151-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

wireguard: device: enable threaded NAPI

Enable threaded NAPI by default for WireGuard devices in response to low
performance behavior that we observed when multiple tunnels (and thus
multiple wg devices) are deployed on a single host. This affects any
kind of multi-tunnel deployment, regardless of whether the tunnels share
the same endpoints or not (i.e., a VPN concentrator type of gateway
would also be affected).

The problem is caused by the fact that, in case of a traffic surge that
involves multiple tunnels at the same time, the polling of the NAPI
instance of all these wg devices tends to converge onto the same core,
causing underutilization of the CPU and bottlenecking performance.

This happens because NAPI polling is hosted by default in softirq
context, but the WireGuard driver only raises this softirq after the rx
peer queue has been drained, which doesn't happen during high traffic.
In this case, the softirq already active on a core is reused instead of
raising a new one.

As a result, once two or more tunnel softirqs have been scheduled on
the same core, they remain pinned there until the surge ends.

In our experiments, this almost always leads to all tunnel NAPIs being
handled on a single core shortly after a surge begins, limiting
scalability to less than 3× the performance of a single tunnel, despite
plenty of unused CPU cores being available.

The proposed mitigation is to enable threaded NAPI for all WireGuard
devices. This moves the NAPI polling context to a dedicated per-device
kernel thread, allowing the scheduler to balance the load across all
available cores.

On our 32-core gateways, enabling threaded NAPI yields a ~4× performance
improvement with 16 tunnels, increasing throughput from ~13 Gbps to
~48 Gbps. Meanwhile, CPU usage on the receiver (which is the bottleneck)
jumps from 20% to 100%.

We have found no performance regressions in any scenario we tested.
Single-tunnel throughput remains unchanged.

More details are available in our Netdev paper.

Link: https://netdevconf.info/0x18/docs/netdev-0x18-paper23-talk-paper.pdf
Signed-off-by: Mirco Barone <mirco.barone@polito.it>
Fixes: e7096c131e51 ("net: WireGuard secure network tunnel")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Link: https://patch.msgid.link/20250605120616.2808744-1-Jason@zx2c4.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'wireless-2025-06-05' of https://git./linux/kernel/git/wireless/wireless

Johannes Berg says:

====================
Couple of quick fixes:
- iwlwifi/iwlmld crash on certain error paths
- iwlwifi/iwlmld regulatory data mixup
- iwlwifi/iwlmld suspend/resume fix
- iwlwifi MSI (without -X) fix
- cfg80211/mac80211 S1G parsing fixes

* tag 'wireless-2025-06-05' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
  wifi: cfg80211/mac80211: correctly parse S1G beacon optional elements
  wifi: iwlwifi: mld: Move regulatory domain initialization
  wifi: iwlwifi: pcie: fix non-MSIX handshake register
  wifi: iwlwifi: mld: avoid panic on init failure
  wifi: iwlwifi: mvm: fix assert on suspend
====================

Link: https://patch.msgid.link/20250605095443.17874-6-johannes@sipsolutions.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Merge tag 'nf-25-06-05' of git://git./linux/kernel/git/netfilter/nf

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for net:

1) Zero out the remainder in nft_pipapo AVX2 implementation, otherwise
   next lookup could bogusly report a mismatch. This is followed by two
   patches to update nft_pipapo selftests to cover for the previous bug.
   From Florian Westphal.

2) Check for reverse tuple too in case of esoteric NAT collisions for
   UDP traffic and extend selftest coverage. Also from Florian.

netfilter pull request 25-06-05

* tag 'nf-25-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
  selftests: netfilter: nft_nat.sh: add test for reverse clash with nat
  netfilter: nf_nat: also check reverse tuple to obtain clashing entry
  selftests: netfilter: nft_concat_range.sh: add datapath check for map fill bug
  selftests: netfilter: nft_concat_range.sh: prefer per element counters for testing
  netfilter: nf_set_pipapo_avx2: fix initial map fill
====================

Link: https://patch.msgid.link/20250605085735.52205-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Merge branch 'netlink-specs-rt-link-decode-ip6gre'

Jakub Kicinski says:

====================
netlink: specs: rt-link: decode ip6gre

Adding GRE tunnels to the .config for driver tests caused
some unhappiness in YNL, as it can't decode all the link
attrs on the system. Add ip6gre support to fix the tests.
This is similar to commit 6ffdbb93a59c ("netlink: specs:
rt_link: decode ip6tnl, vti and vti6 link attrs").
====================

Link: https://patch.msgid.link/20250603135357.502626-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

netlink: specs: rt-link: decode ip6gre

Driver tests now require GRE tunnels, while we don't configure
them with YNL, YNL will complain when it sees link types it
doesn't recognize. Teach it decoding ip6gre tunnels. The attrs
are largely the same as IPv4 GRE.

Correct the type of encap-limit, but note that this attr is
only used in ip6gre, so the mistake didn't matter until now.

Fixes: 0d0f4174f6c8 ("selftests: drv-net: add a simple TSO test")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250603135357.502626-3-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>