Lad Prabhakar [Wed, 10 Jan 2024 22:27:17 +0000 (22:27 +0000)]
dmaengine: sh: rz-dmac: Avoid format-overflow warning
The max channel count for RZ DMAC is 16, hence use u8 instead of unsigned
int and make the pdev_irqname string long enough to avoid the warning.
This fixes the below issue:
drivers/dma/sh/rz-dmac.c: In function ‘rz_dmac_probe’:
drivers/dma/sh/rz-dmac.c:770:34: warning: ‘%u’ directive writing between 1 and 10 bytes into a region of size 3 [-Wformat-overflow=]
770 | sprintf(pdev_irqname, "ch%u", index);
| ^~
In function ‘rz_dmac_chan_probe’,
inlined from ‘rz_dmac_probe’ at drivers/dma/sh/rz-dmac.c:910:9:
drivers/dma/sh/rz-dmac.c:770:31: note: directive argument in the range [0,
4294967294]
770 | sprintf(pdev_irqname, "ch%u", index);
| ^~~~~~
drivers/dma/sh/rz-dmac.c:770:9: note: ‘sprintf’ output between 4 and 13 bytes into a destination of size 5
770 | sprintf(pdev_irqname, "ch%u", index);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
While at it use scnprintf() instead of sprintf() to make the code
more robust.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240110222717.193719-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Randy Dunlap [Fri, 19 Jan 2024 03:28:32 +0000 (19:28 -0800)]
dmaengine: imx-sdma: fix Excess kernel-doc warnings
Fix warnings of "Excess struct member" by removing those lines.
They are extraneous.
imx-sdma.c:467: warning: Excess struct member 'context_loaded' description in 'sdma_channel'
imx-sdma.c:467: warning: Excess struct member 'bd_pool' description in 'sdma_channel'
imx-sdma.c:500: warning: Excess struct member 'script_addrs' description in 'sdma_firmware_header'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Vinod Koul <vkoul@kernel.org>
Cc: dmaengine@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20240119032832.4051-1-rdunlap@infradead.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Nathan Chancellor [Fri, 22 Dec 2023 18:06:45 +0000 (11:06 -0700)]
dmaengine: xilinx: xdma: Fix initialization location of desc in xdma_channel_isr()
Clang warns (or errors with CONFIG_WERROR=y):
drivers/dma/xilinx/xdma.c:894:3: error: variable 'desc' is uninitialized when used here [-Werror,-Wuninitialized]
894 | desc->error = true;
| ^~~~
The initialization of desc was moved too far forward, move it back so
that this assignment does not result in a potential crash at runtime
while clearing up the warning.
Closes: https://github.com/ClangBuiltLinux/linux/issues/1972
Fixes:
2f8f90cd2f8d ("dmaengine: xilinx: xdma: Implement interleaved DMA transfers")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20231222-dma-xilinx-xdma-clang-fixes-v1-2-84a18ff184d2@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Nathan Chancellor [Fri, 22 Dec 2023 18:06:44 +0000 (11:06 -0700)]
dmaengine: xilinx: xdma: Fix operator precedence in xdma_prep_interleaved_dma()
Clang warns (or errors with CONFIG_WERROR=y):
drivers/dma/xilinx/xdma.c:757:68: error: operator '?:' has lower precedence than '+'; '+' will be evaluated first [-Werror,-Wparentheses]
757 | src_addr += dmaengine_get_src_icg(xt, &xt->sgl[i]) + xt->src_inc ?
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ^
drivers/dma/xilinx/xdma.c:757:68: note: place parentheses around the '+' expression to silence this warning
757 | src_addr += dmaengine_get_src_icg(xt, &xt->sgl[i]) + xt->src_inc ?
| ^
| ( )
drivers/dma/xilinx/xdma.c:757:68: note: place parentheses around the '?:' expression to evaluate it first
757 | src_addr += dmaengine_get_src_icg(xt, &xt->sgl[i]) + xt->src_inc ?
| ^
| (
758 | xt->sgl[i].size : 0;
|
| )
drivers/dma/xilinx/xdma.c:759:68: error: operator '?:' has lower precedence than '+'; '+' will be evaluated first [-Werror,-Wparentheses]
759 | dst_addr += dmaengine_get_dst_icg(xt, &xt->sgl[i]) + xt->dst_inc ?
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ^
drivers/dma/xilinx/xdma.c:759:68: note: place parentheses around the '+' expression to silence this warning
759 | dst_addr += dmaengine_get_dst_icg(xt, &xt->sgl[i]) + xt->dst_inc ?
| ^
| ( )
drivers/dma/xilinx/xdma.c:759:68: note: place parentheses around the '?:' expression to evaluate it first
759 | dst_addr += dmaengine_get_dst_icg(xt, &xt->sgl[i]) + xt->dst_inc ?
| ^
| (
760 | xt->sgl[i].size : 0;
|
| )
The src_inc and dst_inc members of 'struct dma_interleaved_template' are
booleans, so it does not make sense for the addition to happen first.
Wrap the conditional operator in parantheses so it is evaluated first.
Closes: https://github.com/ClangBuiltLinux/linux/issues/1971
Fixes:
2f8f90cd2f8d ("dmaengine: xilinx: xdma: Implement interleaved DMA transfers")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20231222-dma-xilinx-xdma-clang-fixes-v1-1-84a18ff184d2@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Vinod Koul [Fri, 19 Jan 2024 11:33:06 +0000 (17:03 +0530)]
Merge tag 'dmaengine-6.8-rc1' into fixes
dmaengine updates for v6.8
New support:
- Loongson LS2X APB DMA controller
- sf-pdma: mpfs-pdma support
- Qualcomm X1E80100 GPI dma controller support
Updates:
- Xilinx XDMA updates to support interleaved DMA transfers
- TI PSIL threads for AM62P and J722S and cfg register regions description
- axi-dmac Improving the cyclic DMA transfers
- Tegra Support dma-channel-mask property
- Remaining platform remove callback returning void conversions
Vinod Koul [Fri, 22 Dec 2023 09:40:01 +0000 (15:10 +0530)]
dmaengine: xilinx: xdma: statify xdma_prep_interleaved_dma
xdma_prep_interleaved_dma() was local to file but not declared static,
leading to warning:
drivers/dma/xilinx/xdma.c:729:1: warning: no previous prototype for 'xdma_prep_interleaved_dma' [-Wmissing-prototypes]
729 | xdma_prep_interleaved_dma(struct dma_chan *chan
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20231222094001.731889-1-vkoul@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Vinod Koul [Fri, 22 Dec 2023 09:40:17 +0000 (15:10 +0530)]
dmaengine: xilinx: xdma: Workaround truncation compilation error
Increase length to be copied to be large enough to overcome the
following compilation error. The buf is large enough for this purpose.
drivers/dma/xilinx/xilinx_dpdma.c: In function ‘xilinx_dpdma_debugfs_desc_done_irq_read’:
drivers/dma/xilinx/xilinx_dpdma.c:313:39: error: ‘snprintf’ output may be truncated before the last format character [-Werror=format-truncation=]
313 | snprintf(buf, out_str_len, "%d",
| ^
drivers/dma/xilinx/xilinx_dpdma.c:313:9: note: ‘snprintf’ output between 2 and 6 bytes into a destination of size 5
313 | snprintf(buf, out_str_len, "%d",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
314 | dpdma_debugfs.xilinx_dpdma_irq_done_count);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20231222094017.731917-1-vkoul@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Bumyong Lee [Tue, 19 Dec 2023 05:50:26 +0000 (14:50 +0900)]
dmaengine: pl330: issue_pending waits until WFP state
According to DMA-330 errata notice[1] 71930, DMAKILL
cannot clear internal signal, named pipeline_req_active.
it makes that pl330 would wait forever in WFP state
although dma already send dma request if pl330 gets
dma request before entering WFP state.
The errata suggests that polling until entering WFP state
as workaround and then peripherals allows to issue dma request.
[1]: https://developer.arm.com/documentation/genc008428/latest
Signed-off-by: Bumyong Lee <bumyong.lee@samsung.com>
Link: https://lore.kernel.org/r/20231219055026.118695-1-bumyong.lee@samsung.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Jan Kuliga [Mon, 18 Dec 2023 11:39:43 +0000 (12:39 +0100)]
dmaengine: xilinx: xdma: Implement interleaved DMA transfers
Interleaved DMA functionality allows dmaengine clients' to express
DMA transfers in an arbitrary way. This is extremely useful in FPGA
environments, where a greater transfer flexibility is needed. For
instance, in one FPGA design there may be need to do DMA to/from a FIFO
at a fixed address, and also to do DMA to/from a (non)contiguous RAM
memory.
Introduce separate tx preparation callback and add tx-flags handling
logic. Their behavior is based on the description of interleaved DMA
transfers in both source code and the DMAEngine's documentation.
Since XDMA is a fully-fledged scatter-gather dma engine, the logic of
xdma_prep_interleaved_dma() is fairly simple and similar to the other
tx preparation callbacks. The whole tx-flags handling logic resides in
xdma_channel_isr(). Transfer of a single frame from a interleaved DMA
transfer template is pretty similar to the single sg transaction.
Therefore, the transaction of the whole interleaved DMA transfer
template is basically a cyclic dma transaction with finite cycles/periods
(equal to the frame of count) of a single sg transfers.
Signed-off-by: Jan Kuliga <jankul@alatek.krakow.pl>
Link: https://lore.kernel.org/r/20231218113943.9099-9-jankul@alatek.krakow.pl
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Jan Kuliga [Mon, 18 Dec 2023 11:39:42 +0000 (12:39 +0100)]
dmaengine: xilinx: xdma: Prepare the introduction of interleaved DMA transfers
Make generic code generic. As descriptor-filling logic stays the same
regardless of a dmaengine's type of transfer, it is possible to write
the descriptor-filling function in a generic way, so that it can be used
for every single type of transfer preparation callback.
Signed-off-by: Jan Kuliga <jankul@alatek.krakow.pl>
Link: https://lore.kernel.org/r/20231218113943.9099-8-jankul@alatek.krakow.pl
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Jan Kuliga [Mon, 18 Dec 2023 11:39:41 +0000 (12:39 +0100)]
dmaengine: xilinx: xdma: Add transfer error reporting
Extend the capability of transfer status reporting. Introduce error flag,
which allows to report error in case of a interrupt-reported error
condition.
Signed-off-by: Jan Kuliga <jankul@alatek.krakow.pl>
Link: https://lore.kernel.org/r/20231218113943.9099-7-jankul@alatek.krakow.pl
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Jan Kuliga [Mon, 18 Dec 2023 11:39:40 +0000 (12:39 +0100)]
dmaengine: xilinx: xdma: Add error checking in xdma_channel_isr()
Check and clear the status register value before proceeding any
further in xdma_channel_isr(). It is necessary to do it since the
interrupt may occur on any error condition enabled at the start of a
transfer.
Signed-off-by: Jan Kuliga <jankul@alatek.krakow.pl>
Link: https://lore.kernel.org/r/20231218113943.9099-6-jankul@alatek.krakow.pl
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Jan Kuliga [Mon, 18 Dec 2023 11:39:39 +0000 (12:39 +0100)]
dmaengine: xilinx: xdma: Rework xdma_terminate_all()
Simplify xdma_xfer_stop(). Stop the dma engine and clear its status
register unconditionally - just do what its name states. This change
also allows to call it without grabbing a lock, which minimizes
the total time spent with a spinlock held.
Delete the currently processed vd.node from the vc.desc_issued list
prior to passing it to vchan_terminate_vdesc(). In case there's more
than one descriptor pending on vc.desc_issued list, calling
vchan_terminate_desc() results in losing the link between
vc.desc_issued list head and the second descriptor on the list. Doing so
results in resources leakege, as vchan_dma_desc_free_list() won't be
able to properly free memory resources attached to descriptors,
resulting in dma_pool_destroy() failure.
Don't call vchan_dma_desc_free_list() from within xdma_terminate_all().
Move all terminated descriptors to the vc.desc_terminated list instead.
This allows to postpone freeing memory resources associated with
descriptors until the call to vchan_synchronize(), which is called from
xdma_synchronize() callback. This is the right way to do it -
xdma_terminate_all() should return as soon as possible, while freeing
resources (that may be time consuming in case of large number of
descriptors) can be done safely later.
Fixes:
f5c392d106e7 ("dmaengine: xilinx: xdma: Add terminate_all/synchronize callbacks")
Signed-off-by: Jan Kuliga <jankul@alatek.krakow.pl>
Link: https://lore.kernel.org/r/20231218113943.9099-5-jankul@alatek.krakow.pl
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Jan Kuliga [Mon, 18 Dec 2023 11:39:38 +0000 (12:39 +0100)]
dmaengine: xilinx: xdma: Ease dma_pool alignment requirements
According to the XDMA datasheet (PG195), the address of any descriptor
must be 32 byte aligned. The datasheet also states that a contiguous
block of descriptors must not cross a 4k address boundary. Therefore,
it is possible to ease the pressure put on the dma_pool allocator
just by requiring sufficient alignment and boundary values. Add proper
macro definition and change the values passed into the
dma_pool_create().
Signed-off-by: Jan Kuliga <jankul@alatek.krakow.pl>
Link: https://lore.kernel.org/r/20231218113943.9099-4-jankul@alatek.krakow.pl
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Jan Kuliga [Mon, 18 Dec 2023 11:39:37 +0000 (12:39 +0100)]
dmaengine: xilinx: xdma: Add necessary macro definitions
Complete lacking bits describing the status/control register values.
Add macros describing the status/control registers.
Signed-off-by: Jan Kuliga <jankul@alatek.krakow.pl>
Link: https://lore.kernel.org/r/20231218113943.9099-3-jankul@alatek.krakow.pl
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Jan Kuliga [Mon, 18 Dec 2023 11:39:36 +0000 (12:39 +0100)]
dmaengine: xilinx: xdma: Get rid of unused code
Get rid of duplicated macro definitions, as these macros are defined
earlier in the file. Also, get rid of unused member
of 'struct xdma_desc'.
Signed-off-by: Jan Kuliga <jankul@alatek.krakow.pl>
Link: https://lore.kernel.org/r/20231218113943.9099-2-jankul@alatek.krakow.pl
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Miquel Raynal [Thu, 30 Nov 2023 11:13:15 +0000 (12:13 +0100)]
dmaengine: xilinx: xdma: Add terminate_all/synchronize callbacks
The driver is capable of starting scatter-gather transfers and needs to
wait until their end. It is also capable of starting cyclic transfers
and will only be "reset" next time the channel will be reused. In
practice most of the time we hear no audio glitch because the sound card
stops the flow on its side so the DMA transfers are just
discarded. There are however some cases (when playing a bit with a
number of frames and with a discontinuous sound file) when the sound
card seems to be slightly too slow at stopping the flow, leading to a
glitch that can be heard.
In all cases, we need to earn better control of the DMA engine and
adding proper ->device_terminate_all() and ->device_synchronize()
callbacks feels totally relevant. With these two callbacks, no glitch
can be heard anymore.
Fixes:
cd8c732ce1a5 ("dmaengine: xilinx: xdma: Support cyclic transfers")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Tested-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://lore.kernel.org/r/20231130111315.729430-5-miquel.raynal@bootlin.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Miquel Raynal [Thu, 30 Nov 2023 11:13:14 +0000 (12:13 +0100)]
dmaengine: xilinx: xdma: Better handling of the busy variable
The driver internal scatter-gather logic is:
* set busy to true
* start transfer
<irq>
* set busy to false
* trigger next transfer if any
* set busy to true
</irq>
Setting busy to false in cyclic transfers does not make any sense and is
conceptually wrong. In order to ease the integration of additional
callbacks let's move this change to the scatter-gather path.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20231130111315.729430-4-miquel.raynal@bootlin.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Miquel Raynal [Thu, 30 Nov 2023 11:13:13 +0000 (12:13 +0100)]
dmaengine: xilinx: xdma: Clarify the logic between cyclic/sg modes
We support both modes, but they perform totally different taks in the
interrupt handler. Clarify what shall be done in each case.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20231130111315.729430-3-miquel.raynal@bootlin.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Miquel Raynal [Thu, 30 Nov 2023 11:13:12 +0000 (12:13 +0100)]
dmaengine: xilinx: xdma: Fix the count of elapsed periods in cyclic mode
Xilinx DMA engine is capable of keeping track of the number of elapsed
periods and this is an increasing 32-bit counter which is only reset
when turning off the engine. No need to add this value to our local
counter.
Fixes:
cd8c732ce1a5 ("dmaengine: xilinx: xdma: Support cyclic transfers")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20231130111315.729430-2-miquel.raynal@bootlin.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Rex Zhang [Tue, 12 Dec 2023 02:21:58 +0000 (10:21 +0800)]
dmaengine: idxd: Move dma_free_coherent() out of spinlocked context
Task may be rescheduled within dma_free_coherent(). So dma_free_coherent()
can't be called between spin_lock() and spin_unlock() to avoid Call Trace:
Call Trace:
<TASK>
dump_stack_lvl+0x37/0x50
__might_resched+0x16a/0x1c0
vunmap+0x2c/0x70
__iommu_dma_free+0x96/0x100
idxd_device_evl_free+0xd5/0x100 [idxd]
device_release_driver_internal+0x197/0x200
unbind_store+0xa1/0xb0
kernfs_fop_write_iter+0x120/0x1c0
vfs_write+0x2d3/0x400
ksys_write+0x63/0xe0
do_syscall_64+0x44/0xa0
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
Move it out of the context.
Fixes:
244da66cda35 ("dmaengine: idxd: setup event log configuration")
Signed-off-by: Rex Zhang <rex.zhang@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Link: https://lore.kernel.org/r/20231212022158.358619-2-rex.zhang@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Vignesh Raghavendra [Wed, 13 Dec 2023 08:13:18 +0000 (13:43 +0530)]
dmaengine: ti: k3-udma: Add PSIL threads for AM62P and J722S
Add PSIL thread information and enable UDMA support for AM62P
and J722S SoC. J722S SoC family is a superset of AM62P, thus
common PSIL thread ID map is reused for both devices.
For those interested, more details about the SoC can be found
in the Technical Reference Manual here:
AM62P - https://www.ti.com/lit/pdf/spruj83
J722S - https://www.ti.com/lit/zip/sprujb3
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Bryan Brattlof <bb@ti.com>
Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
Reviewed-by: Jai Luthra <j-luthra@ti.com>
Link: https://lore.kernel.org/r/20231213081318.26203-1-vaishnav.a@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Amelie Delaunay [Wed, 13 Dec 2023 16:04:52 +0000 (17:04 +0100)]
dmaengine: fix NULL pointer in channel unregistration function
__dma_async_device_channel_register() can fail. In case of failure,
chan->local is freed (with free_percpu()), and chan->local is nullified.
When dma_async_device_unregister() is called (because of managed API or
intentionally by DMA controller driver), channels are unconditionally
unregistered, leading to this NULL pointer:
[ 1.318693] Unable to handle kernel NULL pointer dereference at virtual address
00000000000000d0
[...]
[ 1.484499] Call trace:
[ 1.486930] device_del+0x40/0x394
[ 1.490314] device_unregister+0x20/0x7c
[ 1.494220] __dma_async_device_channel_unregister+0x68/0xc0
Look at dma_async_device_register() function error path, channel device
unregistration is done only if chan->local is not NULL.
Then add the same condition at the beginning of
__dma_async_device_channel_unregister() function, to avoid NULL pointer
issue whatever the API used to reach this function.
Fixes:
d2fb0a043838 ("dmaengine: break out channel registration")
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20231213160452.2598073-1-amelie.delaunay@foss.st.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Frank Li [Tue, 14 Nov 2023 15:48:23 +0000 (10:48 -0500)]
dmaengine: fsl-edma: utilize common dt-binding header file
Refactor the code to use the common dt-binding header file, fsl-edma.h.
Renaming ARGS* to FSL_EDMA*, ensuring no functional changes.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20231114154824.3617255-4-Frank.Li@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Frank Li [Tue, 14 Nov 2023 15:48:22 +0000 (10:48 -0500)]
dt-bindings: dma: fsl-edma: Add fsl-edma.h to prevent hardcoding in dts
Introduce a common dt-bindings header file, fsl-edma.h, shared between
the driver and dts files. This addition aims to eliminate hardcoded values
in dts files, promoting maintainability and consistency.
DTS header file not support BIT() macro yet. Directly use 2^n number.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231114154824.3617255-3-Frank.Li@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Frank Li [Tue, 14 Nov 2023 15:48:21 +0000 (10:48 -0500)]
dmaengine: fsl-edma: fix eDMAv4 channel allocation issue
The eDMAv4 channel mux has a limitation where certain requests must use
even channels, while others must use odd numbers.
Add two flags (ARGS_EVEN_CH and ARGS_ODD_CH) to reflect this limitation.
The device tree source (dts) files need to be updated accordingly.
This issue was identified by the following commit:
commit
a725990557e7 ("arm64: dts: imx93: Fix the dmas entries order")
Reverting channel orders triggered this problem.
Fixes:
72f5801a4e2b ("dmaengine: fsl-edma: integrate v3 support")
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20231114154824.3617255-2-Frank.Li@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Paul Cercueil [Fri, 15 Dec 2023 13:13:13 +0000 (14:13 +0100)]
dmaengine: axi-dmac: Improve cyclic DMA transfers in SG mode
For cyclic transfers, chain the last descriptor to the first one, and
disable IRQ generation if there is no callback registered with the
cyclic transfer.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20231215131313.23840-6-paul@crapouillou.net
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Paul Cercueil [Fri, 15 Dec 2023 13:13:12 +0000 (14:13 +0100)]
dmaengine: axi-dmac: Use only EOT interrupts when doing scatter-gather
Instead of notifying userspace in the end-of-transfer (EOT) interrupt
and program the hardware in the start-of-transfer (SOT) interrupt, we
can do both things in the EOT, allowing us to mask the SOT, and halve
the number of interrupts sent by the HDL core.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20231215131313.23840-5-paul@crapouillou.net
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Paul Cercueil [Fri, 15 Dec 2023 13:13:11 +0000 (14:13 +0100)]
dmaengine: axi-dmac: Add support for scatter-gather transfers
Implement support for scatter-gather transfers. Build a chain of
hardware descriptors, each one corresponding to a segment of the
transfer, and linked to the next one. The hardware will transfer the
chain and only fire interrupts when the whole chain has been
transferred.
Support for scatter-gather is automatically enabled when the driver
detects that the hardware supports it, by writing then reading the
AXI_DMAC_REG_SG_ADDRESS register. If not available, the driver will fall
back to standard DMA transfers.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20231215131313.23840-4-paul@crapouillou.net
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Paul Cercueil [Fri, 15 Dec 2023 13:13:10 +0000 (14:13 +0100)]
dmaengine: axi-dmac: Allocate hardware descriptors
Change where and how the DMA transfers meta-data is stored, to prepare
for the upcoming introduction of scatter-gather support.
Allocate hardware descriptors in the format that the HDL core will be
expecting them when the scatter-gather feature is enabled, and use these
fields to store the data that was previously stored in the axi_dmac_sg
structure.
Note that the 'x_len' and 'y_len' fields now contain the transfer length
minus one, since that's what the hardware will expect in these fields.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20231215131313.23840-3-paul@crapouillou.net
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Paul Cercueil [Fri, 15 Dec 2023 13:13:09 +0000 (14:13 +0100)]
dmaengine: axi-dmac: Small code cleanup
Use a for() loop instead of a while() loop in axi_dmac_fill_linear_sg().
This makes the code leaner and cleaner overall, and does not introduce
any functional change.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20231215131313.23840-2-paul@crapouillou.net
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Binbin Zhou [Mon, 18 Dec 2023 01:56:39 +0000 (09:56 +0800)]
dmaengine: ls2x-apb: New driver for the Loongson LS2X APB DMA controller
The Loongson LS2X APB DMA controller is available on Loongson-2K chips.
It is a single-channel, configurable DMA controller IP core based on the
AXI bus, whose main function is to integrate DMA functionality on a chip
dedicated to carrying data between memory and peripherals in APB bus
(e.g. nand).
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Yingkun Meng <mengyingkun@loongson.cn>
Link: https://lore.kernel.org/r/8df2a0199434fba3535831082966c2442ecf1cae.1702365725.git.zhoubinbin@loongson.cn
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Binbin Zhou [Mon, 18 Dec 2023 01:56:38 +0000 (09:56 +0800)]
dt-bindings: dmaengine: Add Loongson LS2X APB DMA controller
Add Loongson LS2X APB DMA controller binding with DT schema
format using json-schema.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Link: https://lore.kernel.org/r/078307641077edaf46dd986c6d31cea15545a208.1702365725.git.zhoubinbin@loongson.cn
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Randy Dunlap [Mon, 18 Dec 2023 06:08:34 +0000 (22:08 -0800)]
dmaengine: std_dma40: fix kernel-doc warnings and spelling
Correct kernel-doc warnings as reported by kernel test robot:
ste_dma40.c:57: warning: Excess struct member 'dev_tx' description in 'stedma40_platform_data'
ste_dma40.c:57: warning: Excess struct member 'dev_rx' description in 'stedma40_platform_data'
Correct spellos as reported by codespell.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/
202312171417.izbQThoU-lkp@intel.com/
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Vinod Koul <vkoul@kernel.org>
Cc: dmaengine@vger.kernel.org
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20231218060834.19222-1-rdunlap@infradead.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Christophe JAILLET [Tue, 19 Dec 2023 19:33:50 +0000 (20:33 +0100)]
dmaengine: idxd: Remove usage of the deprecated ida_simple_xx() API
ida_alloc() and ida_free() should be preferred to the deprecated
ida_simple_get() and ida_simple_remove().
This is less verbose.
Note that the upper limit of ida_simple_get() is exclusive, but the one of
ida_alloc_range() is inclusive. Sothis change allows one more device.
MINORMASK is ((1U << MINORBITS) - 1), so allowing MINORMASK as a maximum value
makes sense. It is also consistent with other "ida_.*MINORMASK" and
"ida_*MINOR()" usages.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Acked-by: Lijun Pan <lijun.pan@intel.com>
Link: https://lore.kernel.org/r/ac991f5f42112fa782a881d391d447529cbc4a23.1702967302.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Amelie Delaunay [Fri, 24 Nov 2023 16:02:35 +0000 (17:02 +0100)]
dmaengine: dmatest: prevent using swiotlb buffer with nobounce parameter
Source and destination data buffers are allocated with GPF_KERNEL flag.
It means that, if the DDR is more than 2GB, buffers can be allocated above
the 32-bit addressable space. In this case, and if the dma controller is
only 32-bit compatible, swiotlb bounce buffer, located in the 32-bit
addressable space, is used and introduces a memcpy.
To prevent this extra memcpy, due to swiotlb bounce buffer use because
source or destination data buffer is allocated above the 32-bit addressable
space, force source and destination data buffers allocation with GPF_DMA
instead, when nobounce parameter is true.
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/20231124160235.2459326-1-amelie.delaunay@foss.st.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Frank Li [Mon, 27 Nov 2023 21:43:25 +0000 (16:43 -0500)]
dmaengine: fsl-edma: fix DMA channel leak in eDMAv4
Allocate channel count consistently increases due to a missing source ID
(srcid) cleanup in the fsl_edma_free_chan_resources() function at imx93
eDMAv4.
Reset 'srcid' at fsl_edma_free_chan_resources().
Cc: stable@vger.kernel.org
Fixes:
72f5801a4e2b ("dmaengine: fsl-edma: integrate v3 support")
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20231127214325.2477247-1-Frank.Li@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Mohan Kumar [Tue, 28 Nov 2023 07:16:15 +0000 (12:46 +0530)]
dmaengine: tegra210-adma: Support dma-channel-mask property
To support the flexibility to reserve the specific dma channels
add the support of dma-channel-mask property in the tegra210-adma
driver
Signed-off-by: Mohan Kumar <mkumard@nvidia.com>
Link: https://lore.kernel.org/r/20231128071615.31447-3-mkumard@nvidia.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Mohan Kumar [Tue, 28 Nov 2023 07:16:14 +0000 (12:46 +0530)]
dt-bindings: dma: Add dma-channel-mask to nvidia,tegra210-adma
Add dma-channel-mask binding doc support to nvidia,tegra210-adma
to reserve the adma channel usage
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mohan Kumar <mkumard@nvidia.com>
Link: https://lore.kernel.org/r/20231128071615.31447-2-mkumard@nvidia.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Yang Yingliang [Wed, 29 Nov 2023 09:00:00 +0000 (17:00 +0800)]
dmaengine: fsl-edma: fix wrong pointer check in fsl_edma3_attach_pd()
device_link_add() returns NULL pointer not PTR_ERR() when it fails,
so replace the IS_ERR() check with NULL pointer check.
Fixes:
72f5801a4e2b ("dmaengine: fsl-edma: integrate v3 support")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20231129090000.841440-1-yangyingliang@huaweicloud.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Shravan Chippa [Fri, 8 Dec 2023 10:38:55 +0000 (16:08 +0530)]
dmaengine: sf-pdma: add mpfs-pdma compatible name
Sifive platform dma (sf-pdma) has both in-order and out-of-order
configurations but sf-pdam driver configured to do in-order DMA
transfers, with out-of-order configuration got better throughput
in the PolarFire SoC platform.
Add a PolarFire SoC specific compatible and code to support
for out-of-order dma transfers
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Shravan Chippa <shravan.chippa@microchip.com>
Link: https://lore.kernel.org/r/20231208103856.3732998-4-shravan.chippa@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Shravan Chippa [Fri, 8 Dec 2023 10:38:54 +0000 (16:08 +0530)]
dt-bindings: dma: sf-pdma: add new compatible name
Add new compatible name microchip,mpfs-pdma to support
out of order dma transfers
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Shravan Chippa <shravan.chippa@microchip.com>
Link: https://lore.kernel.org/r/20231208103856.3732998-3-shravan.chippa@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Shravan Chippa [Fri, 8 Dec 2023 10:38:53 +0000 (16:08 +0530)]
dmaengine: sf-pdma: Support of_dma_controller_register()
Update sf-pdma driver to adopt generic DMA device tree bindings.
It calls of_dma_controller_register() with of_dma_xlate_by_chan_id
to get the generic DMA device tree helper support and the DMA
clients can look up the sf-pdma controller using standard APIs.
Signed-off-by: Shravan Chippa <shravan.chippa@microchip.com>
Link: https://lore.kernel.org/r/20231208103856.3732998-2-shravan.chippa@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Rob Herring [Wed, 22 Nov 2023 23:50:50 +0000 (16:50 -0700)]
dt-bindings: dma: Drop undocumented examples
The compatibles "ti,omap-sdma" and "ti,dra7-dma-crossbar" aren't documented
by a schema which causes warnings:
Documentation/devicetree/bindings/dma/dma-controller.example.dtb: /example-0/dma-controller@
48000000: failed to match any schema with compatible: ['ti,omap-sdma']
Documentation/devicetree/bindings/dma/dma-router.example.dtb: /example-0/dma-router@
4a002b78: failed to match any schema with compatible: ['ti,dra7-dma-crossbar']
As no one has cared to fix them, just drop them.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231122235050.2966280-1-robh@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Guanjun [Mon, 11 Dec 2023 05:37:04 +0000 (13:37 +0800)]
dmaengine: idxd: Fix incorrect descriptions for GRPCFG register
Fix incorrect descriptions for the GRPCFG register which has three
sub-registers (GRPWQCFG, GRPENGCFG and GRPFLGCFG).
No functional changes
Signed-off-by: Guanjun <guanjun@linux.alibaba.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Acked-by: Lijun Pan <lijun.pan@intel.com>
Link: https://lore.kernel.org/r/20231211053704.2725417-3-guanjun@linux.alibaba.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Guanjun [Mon, 11 Dec 2023 05:37:03 +0000 (13:37 +0800)]
dmaengine: idxd: Protect int_handle field in hw descriptor
The int_handle field in hw descriptor should also be protected
by wmb() before possibly triggering a DMA read.
Fixes:
eb0cf33a91b4 (dmaengine: idxd: move interrupt handle assignment)
Signed-off-by: Guanjun <guanjun@linux.alibaba.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Reviewed-by: Lijun Pan <lijun.pan@intel.com>
Link: https://lore.kernel.org/r/20231211053704.2725417-2-guanjun@linux.alibaba.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Hector Martin [Sun, 29 Oct 2023 17:07:04 +0000 (18:07 +0100)]
dmaengine: apple-admac: Keep upper bits of REG_BUS_WIDTH
For RX channels, REG_BUS_WIDTH seems to default to a value of 0xf00, and
macOS preserves the upper bits when setting the configuration in the
lower ones. If we reset the upper bits to 0, this causes framing errors
on suspend/resume (the data stream "tears" and channels get swapped
around). Keeping the upper bits untouched, like the macOS driver does,
fixes this issue.
Signed-off-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Martin Povišer <povik+lin@cutebit.org>
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20231029170704.82238-1-povik+lin@cutebit.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Neil Armstrong [Wed, 25 Oct 2023 08:23:04 +0000 (10:23 +0200)]
dt-bindings: dma: qcom,gpi: document the SM8650 GPI DMA Engine
Document the GPI DMA Engine on the SM8650 Platform.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231025-topic-sm8650-upstream-bindings-gpi-v2-1-4de85293d730@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Uwe Kleine-König [Sun, 5 Nov 2023 09:34:20 +0000 (10:34 +0100)]
dmaengine: uniphier-xdmac: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
There is an error path that has the above mentioned problem. This patch
only adds a more drastic error message. To properly fix it,
dmaengine_terminate_sync() must be known to have succeeded (or that it's
safe to not call it as other drivers seem to assume).
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231105093415.3704633-10-u.kleine-koenig@pengutronix.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Uwe Kleine-König [Sun, 5 Nov 2023 09:34:19 +0000 (10:34 +0100)]
dmaengine: uniphier-mdmac: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
There is an error path that has the above mentioned problem. This patch
only adds a more drastic error message. To properly fix it,
dmaengine_terminate_sync() must be known to have succeeded (or that it's
safe to not call it as other drivers seem to assume).
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231105093415.3704633-9-u.kleine-koenig@pengutronix.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Uwe Kleine-König [Sun, 5 Nov 2023 09:34:18 +0000 (10:34 +0100)]
dmaengine: milbeaut-xdmac: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
There is an error path that has the above mentioned problem. This patch
only adds a more drastic error message. To properly fix it,
dmaengine_terminate_sync() must be known to have succeeded (or that it's
safe to not call it as other drivers seem to assume).
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231105093415.3704633-8-u.kleine-koenig@pengutronix.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Uwe Kleine-König [Sun, 5 Nov 2023 09:34:17 +0000 (10:34 +0100)]
dmaengine: milbeaut-hdmac: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
There is an error path that has the above mentioned problem. This patch
only adds a more drastic error message. To properly fix it,
dmaengine_terminate_sync() must be known to have succeeded (or that it's
safe to not call it as other drivers seem to assume).
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231105093415.3704633-7-u.kleine-koenig@pengutronix.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Amelie Delaunay [Mon, 6 Nov 2023 13:48:32 +0000 (14:48 +0100)]
dmaengine: stm32-dma: avoid bitfield overflow assertion
stm32_dma_get_burst() returns a negative error for invalid input, which
gets turned into a large u32 value in stm32_dma_prep_dma_memcpy() that
in turn triggers an assertion because it does not fit into a two-bit field:
drivers/dma/stm32-dma.c: In function 'stm32_dma_prep_dma_memcpy':
include/linux/compiler_types.h:354:38: error: call to '__compiletime_assert_282' declared with attribute error: FIELD_PREP: value too large for the field
_compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
^
include/linux/compiler_types.h:335:4: note: in definition of macro '__compiletime_assert'
prefix ## suffix(); \
^~~~~~
include/linux/compiler_types.h:354:2: note: in expansion of macro '_compiletime_assert'
_compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
^~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:39:37: note: in expansion of macro 'compiletime_assert'
#define BUILD_BUG_ON_MSG(cond, msg) compiletime_assert(!(cond), msg)
^~~~~~~~~~~~~~~~~~
include/linux/bitfield.h:68:3: note: in expansion of macro 'BUILD_BUG_ON_MSG'
BUILD_BUG_ON_MSG(__builtin_constant_p(_val) ? \
^~~~~~~~~~~~~~~~
include/linux/bitfield.h:114:3: note: in expansion of macro '__BF_FIELD_CHECK'
__BF_FIELD_CHECK(_mask, 0ULL, _val, "FIELD_PREP: "); \
^~~~~~~~~~~~~~~~
drivers/dma/stm32-dma.c:1237:4: note: in expansion of macro 'FIELD_PREP'
FIELD_PREP(STM32_DMA_SCR_PBURST_MASK, dma_burst) |
^~~~~~~~~~
As an easy workaround, assume the error can happen, so try to handle this
by failing stm32_dma_prep_dma_memcpy() before the assertion. It replicates
what is done in stm32_dma_set_xfer_param() where stm32_dma_get_burst() is
also used.
Fixes:
1c32d6c37cc2 ("dmaengine: stm32-dma: use bitfield helpers")
Fixes:
a2b6103b7a8a ("dmaengine: stm32-dma: Improve memory burst management")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Cc: stable@vger.kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/
202311060135.Q9eMnpCL-lkp@intel.com/
Link: https://lore.kernel.org/r/20231106134832.1470305-1-amelie.delaunay@foss.st.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Xiaolei Wang [Mon, 13 Nov 2023 22:57:13 +0000 (06:57 +0800)]
dmaengine: fsl-edma: Add judgment on enabling round robin arbitration
Add judgment on enabling round robin arbitration to avoid
exceptions if this function is not supported.
Call trace:
fsl_edma_resume_early+0x1d4/0x208
dpm_run_callback+0xd4/0x304
device_resume_early+0xb0/0x208
dpm_resume_early+0x224/0x528
suspend_devices_and_enter+0x3e4/0xd00
pm_suspend+0x3c4/0x910
state_store+0x90/0x124
kobj_attr_store+0x48/0x64
sysfs_kf_write+0x84/0xb4
kernfs_fop_write_iter+0x19c/0x264
vfs_write+0x664/0x858
ksys_write+0xc8/0x180
__arm64_sys_write+0x44/0x58
invoke_syscall+0x5c/0x178
el0_svc_common.constprop.0+0x11c/0x14c
do_el0_svc+0x30/0x40
el0_svc+0x58/0xa8
el0t_64_sync_handler+0xc0/0xc4
el0t_64_sync+0x190/0x194
Fixes:
72f5801a4e2b ("dmaengine: fsl-edma: integrate v3 support")
Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20231113225713.1892643-3-xiaolei.wang@windriver.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Xiaolei Wang [Mon, 13 Nov 2023 22:57:12 +0000 (06:57 +0800)]
dmaengine: fsl-edma: Do not suspend and resume the masked dma channel when the system is sleeping
Some channels may be masked. When the system is suspended,
if these masked channels are not filtered out, this will
lead to null pointer operations and system crash:
Unable to handle kernel NULL pointer dereference at virtual address
Mem abort info:
ESR = 0x0000000096000004
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x04: level 0 translation fault
Data abort info:
ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
CM = 0, WnR = 0, TnD = 0, TagAccess = 0
GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
user pgtable: 4k pages, 48-bit VAs, pgdp=
0000000894300000
[
00000000000002a0] pgd=
0000000000000000, p4d=
0000000000000000
Internal error: Oops:
0000000096000004 [#1] PREEMPT SMP
Modules linked in:
CPU: 1 PID: 989 Comm: sh Tainted: G B
6.6.0-16203-g557fb7a3ec4c-dirty #70
Hardware name: Freescale i.MX8QM MEK (DT)
pstate:
400000c5 (nZcv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc: fsl_edma_disable_request+0x3c/0x78
lr: fsl_edma_disable_request+0x3c/0x78
sp:
ffff800089ae7690
x29:
ffff800089ae7690 x28:
ffff000807ab5440 x27:
ffff000807ab5830
x26:
0000000000000008 x25:
0000000000000278 x24:
0000000000000001
23:
ffff000807ab4328 x22:
0000000000000000 x21:
0000000000000009
x20:
ffff800082616940 x19:
0000000000000000 x18:
0000000000000000
x17:
3d3d3d3d3d3d3d3d x16:
3d3d3d3d3d3d3d3d x15:
3d3d3d3d3d3d3d3d
x14:
3d3d3d3d3d3d3d3d x13:
3d3d3d3d3d3d3d3d x12:
1ffff00010d45724
x11:
ffff700010d45724 x10:
dfff800000000000 x9:
dfff800000000000
x8:
00008fffef2ba8dc x7:
0000000000000001 x6:
ffff800086a2b927
x5:
ffff800086a2b920 x4:
ffff700010d45725 x3:
ffff8000800d5bbc
x2 :
0000000000000000 x1 :
ffff000800c1d880 x0 :
0000000000000001
Call trace:
fsl_edma_disable_request+0x3c/0x78
fsl_edma_suspend_late+0x128/0x12c
dpm_run_callback+0xd4/0x304
__device_suspend_late+0xd0/0x240
dpm_suspend_late+0x174/0x59c
suspend_devices_and_enter+0x194/0xd00
pm_suspend+0x3c4/0x910
Fixes:
72f5801a4e2b ("dmaengine: fsl-edma: integrate v3 support")
Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com>
Link: https://lore.kernel.org/r/20231113225713.1892643-2-xiaolei.wang@windriver.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Lad Prabhakar [Thu, 2 Nov 2023 20:39:22 +0000 (20:39 +0000)]
dt-bindings: dma: rz-dmac: Document RZ/Five SoC
The DMAC block on the RZ/Five SoC is identical to one found on the RZ/G2UL
SoC. "renesas,r9a07g043-dmac" compatible string will be used on the
RZ/Five SoC so to make this clear, update the comment to include RZ/Five
SoC.
No driver changes are required as generic compatible string
"renesas,rz-dmac" will be used as a fallback on RZ/Five SoC.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20231102203922.548353-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Sibi Sankar [Fri, 24 Nov 2023 10:06:06 +0000 (15:36 +0530)]
dt-bindings: dma: qcom: gpi: add compatible for X1E80100
The Qualcomm X1E80100 uses GPI DMA for its GENI interface. Add a compatible
string for it in the documentation by using the SM6350 as fallback.
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231124100608.29964-4-quic_sibis@quicinc.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Jai Luthra [Thu, 23 Nov 2023 09:27:31 +0000 (14:57 +0530)]
dmaengine: ti: k3-psil-am62a: Fix SPI PDMA data
AM62Ax has 3 SPI channels where each channel has 4x TX and 4x RX
threads. Also fix the thread numbers to match what the firmware expects
according to the PSI-L device description.
Link: http://downloads.ti.com/tisci/esd/latest/5_soc_doc/am62ax/psil_cfg.html
Fixes:
aac6db7e243a ("dmaengine: ti: k3-psil-am62a: Add AM62Ax PSIL and PDMA data")
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Link: https://lore.kernel.org/r/20231123-psil_fix-v1-1-6604d80819be@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Vignesh Raghavendra [Fri, 24 Nov 2023 04:57:22 +0000 (10:27 +0530)]
dt-bindings: dma: ti: k3-udma: Describe cfg register regions
Unified DMA (UDMA) module on K3 SoCs have TX and RX channel cfg and RX
flow cfg register regions which are usually configured by a Device
Management firmware. But certain entities such as bootloader (like
U-Boot) may have to access them directly. Describe this region in the
binding documentation for completeness of module description.
Keep the binding compatible with existing DTS files by requiring first
four regions to be present at least.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231124045722.191817-5-vigneshr@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Vignesh Raghavendra [Fri, 24 Nov 2023 04:57:21 +0000 (10:27 +0530)]
dt-bindings: dma: ti: k3-pktdma: Describe cfg register regions
Packet DMA (PKTDMA) module on K3 SoCs have ring cfg, TX and RX channel
cfg and RX flow cfg register regions which are usually configured by a
Device Management firmware. But certain entities such as bootloader
(like U-Boot) may have to access them directly. Describe this region in
the binding documentation for completeness of module description.
Keep the binding compatible with existing DTS files by requiring first
four regions to be present at least.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231124045722.191817-4-vigneshr@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Vignesh Raghavendra [Fri, 24 Nov 2023 04:57:20 +0000 (10:27 +0530)]
dt-bindings: dma: ti: k3-bcdma: Describe cfg register regions
Block copy DMA(BCDMA)module on K3 SoCs have ring, BCHAN, TX and RX
channel cfg register regions which are usually configured by a Device
Management firmware. But certain entities such as bootloader (like
U-Boot) may have to access them directly. Describe this region in the
binding documentation for completeness of module description.
Keep the binding compatible with existing DTS files by requiring first
five regions to be present at least.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231124045722.191817-3-vigneshr@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Vignesh Raghavendra [Fri, 24 Nov 2023 04:57:19 +0000 (10:27 +0530)]
dt-bindings: dma: ti: k3-*: Add descriptions for register regions
In preparation for introducing more register regions, add description
for existing register regions so that its easier to map reg-names to
that of SoC Documentations/TRMs.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231124045722.191817-2-vigneshr@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Ronald Wahl [Mon, 30 Oct 2023 19:01:13 +0000 (20:01 +0100)]
dmaengine: ti: k3-psil-am62: Fix SPI PDMA data
AM62x has 3 SPI channels where each channel has 4 TX and 4 RX threads.
This also fixes the thread numbers.
Signed-off-by: Ronald Wahl <ronald.wahl@raritan.com>
Fixes:
5ac6bfb58777 ("dmaengine: ti: k3-psil: Add AM62x PSIL and PDMA data")
Reviewed-by: Jai Luthra <j-luthra@ti.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20231030190113.16782-1-rwahl@gmx.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Linus Torvalds [Mon, 13 Nov 2023 00:19:07 +0000 (16:19 -0800)]
Linux 6.7-rc1
Miri Korenblit [Sun, 12 Nov 2023 14:36:20 +0000 (16:36 +0200)]
wifi: iwlwifi: fix system commands group ordering
The commands should be sorted inside the group definition.
Fix the ordering so we won't get following warning:
WARN_ON(iwl_cmd_groups_verify_sorted(trans_cfg))
Link: https://lore.kernel.org/regressions/2fa930bb-54dd-4942-a88d-05a47c8e9731@gmail.com/
Link: https://lore.kernel.org/linux-wireless/CAHk-=wix6kqQ5vHZXjOPpZBfM7mMm9bBZxi2Jh7XnaKCqVf94w@mail.gmail.com/
Fixes:
b6e3d1ba4fcf ("wifi: iwlwifi: mvm: implement new firmware API for statistics")
Tested-by: Niklāvs Koļesņikovs <pinkflames.linux@gmail.com>
Tested-by: Damian Tometzki <damian@riscv-rocks.de>
Acked-by: Kalle Valo <kvalo@kernel.org>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sun, 12 Nov 2023 19:05:31 +0000 (11:05 -0800)]
Merge tag 'parisc-for-6.7-rc1-2' of git://git./linux/kernel/git/deller/parisc-linux
Pull parisc architecture fixes from Helge Deller:
- Include the upper 5 address bits when inserting TLB entries on a
64-bit kernel.
On physical machines those are ignored, but in qemu it's nice to have
them included and to be correct.
- Stop the 64-bit kernel and show a warning if someone tries to boot on
a machine with a 32-bit CPU
- Fix a "no previous prototype" warning in parport-gsc
* tag 'parisc-for-6.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Prevent booting 64-bit kernels on PA1.x machines
parport: gsc: mark init function static
parisc/pgtable: Do not drop upper 5 address bits of physical address
Linus Torvalds [Sun, 12 Nov 2023 18:58:08 +0000 (10:58 -0800)]
Merge tag 'loongarch-6.7' of git://git./linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch updates from Huacai Chen:
- support PREEMPT_DYNAMIC with static keys
- relax memory ordering for atomic operations
- support BPF CPU v4 instructions for LoongArch
- some build and runtime warning fixes
* tag 'loongarch-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
selftests/bpf: Enable cpu v4 tests for LoongArch
LoongArch: BPF: Support signed mod instructions
LoongArch: BPF: Support signed div instructions
LoongArch: BPF: Support 32-bit offset jmp instructions
LoongArch: BPF: Support unconditional bswap instructions
LoongArch: BPF: Support sign-extension mov instructions
LoongArch: BPF: Support sign-extension load instructions
LoongArch: Add more instruction opcodes and emit_* helpers
LoongArch/smp: Call rcutree_report_cpu_starting() earlier
LoongArch: Relax memory ordering for atomic operations
LoongArch: Mark __percpu functions as always inline
LoongArch: Disable module from accessing external data directly
LoongArch: Support PREEMPT_DYNAMIC with static keys
Linus Torvalds [Sun, 12 Nov 2023 18:50:38 +0000 (10:50 -0800)]
Merge tag 'powerpc-6.7-2' of git://git./linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Finish a refactor of pgprot_framebuffer() which dependend
on some changes that were merged via the drm tree
- Fix some kernel-doc warnings to quieten the bots
Thanks to Nathan Lynch and Thomas Zimmermann.
* tag 'powerpc-6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/rtas: Fix ppc_rtas_rmo_buf_show() kernel-doc
powerpc/pseries/rtas-work-area: Fix rtas_work_area_reserve_arena() kernel-doc
powerpc/fb: Call internal __phys_mem_access_prot() in fbdev code
powerpc: Remove file parameter from phys_mem_access_prot()
powerpc/machdep: Remove trailing whitespaces
Linus Torvalds [Sun, 12 Nov 2023 01:17:22 +0000 (17:17 -0800)]
Merge tag '6.7-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
- ctime caching fix (for setxattr)
- encryption fix
- DNS resolver mount fix
- debugging improvements
- multichannel fixes including cases where server stops or starts
supporting multichannel after mount
- reconnect fix
- minor cleanups
* tag '6.7-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
cifs: update internal module version number for cifs.ko
cifs: handle when server stops supporting multichannel
cifs: handle when server starts supporting multichannel
Missing field not being returned in ioctl CIFS_IOC_GET_MNT_INFO
smb3: allow dumping session and tcon id to improve stats analysis and debugging
smb: client: fix mount when dns_resolver key is not available
smb3: fix caching of ctime on setxattr
smb3: minor cleanup of session handling code
cifs: reconnect work should have reference on server struct
cifs: do not pass cifs_sb when trying to add channels
cifs: account for primary channel in the interface list
cifs: distribute channels across interfaces based on speed
cifs: handle cases where a channel is closed
smb3: more minor cleanups for session handling routines
smb3: minor RDMA cleanup
cifs: Fix encryption of cleared, but unset rq_iter data buffers
Linus Torvalds [Sat, 11 Nov 2023 00:35:04 +0000 (16:35 -0800)]
Merge tag 'probes-fixes-v6.7-rc1' of git://git./linux/kernel/git/trace/linux-trace
Pull probes fixes from Masami Hiramatsu:
- Documentation update: Add a note about argument and return value
fetching is the best effort because it depends on the type.
- objpool: Fix to make internal global variables static in
test_objpool.c.
- kprobes: Unify kprobes_exceptions_nofify() prototypes. There are the
same prototypes in asm/kprobes.h for some architectures, but some of
them are missing the prototype and it causes a warning. So move the
prototype into linux/kprobes.h.
- tracing: Fix to check the tracepoint event and return event at
parsing stage. The tracepoint event doesn't support %return but if
$retval exists, it will be converted to %return silently. This finds
that case and rejects it.
- tracing: Fix the order of the descriptions about the parameters of
__kprobe_event_gen_cmd_start() to be consistent with the argument
list of the function.
* tag 'probes-fixes-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/kprobes: Fix the order of argument descriptions
tracing: fprobe-event: Fix to check tracepoint event and return
kprobes: unify kprobes_exceptions_nofify() prototypes
lib: test_objpool: make global variables static
Documentation: tracing: Add a note about argument and retval access
Linus Torvalds [Fri, 10 Nov 2023 23:07:01 +0000 (15:07 -0800)]
Merge tag 'fbdev-for-6.7-rc1' of git://git./linux/kernel/git/deller/linux-fbdev
Pull fbdev fixes and cleanups from Helge Deller:
- fix double free and resource leaks in imsttfb
- lots of remove callback cleanups and section mismatch fixes in
omapfb, amifb and atmel_lcdfb
- error code fix and memparse simplification in omapfb
* tag 'fbdev-for-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev: (31 commits)
fbdev: fsl-diu-fb: mark wr_reg_wa() static
fbdev: amifb: Convert to platform remove callback returning void
fbdev: amifb: Mark driver struct with __refdata to prevent section mismatch warning
fbdev: hyperv_fb: fix uninitialized local variable use
fbdev: omapfb/tpd12s015: Convert to platform remove callback returning void
fbdev: omapfb/tfp410: Convert to platform remove callback returning void
fbdev: omapfb/sharp-ls037v7dw01: Convert to platform remove callback returning void
fbdev: omapfb/opa362: Convert to platform remove callback returning void
fbdev: omapfb/hdmi: Convert to platform remove callback returning void
fbdev: omapfb/dvi: Convert to platform remove callback returning void
fbdev: omapfb/dsi-cm: Convert to platform remove callback returning void
fbdev: omapfb/dpi: Convert to platform remove callback returning void
fbdev: omapfb/analog-tv: Convert to platform remove callback returning void
fbdev: atmel_lcdfb: Convert to platform remove callback returning void
fbdev: omapfb/tpd12s015: Don't put .remove() in .exit.text and drop suppress_bind_attrs
fbdev: omapfb/tfp410: Don't put .remove() in .exit.text and drop suppress_bind_attrs
fbdev: omapfb/sharp-ls037v7dw01: Don't put .remove() in .exit.text and drop suppress_bind_attrs
fbdev: omapfb/opa362: Don't put .remove() in .exit.text and drop suppress_bind_attrs
fbdev: omapfb/hdmi: Don't put .remove() in .exit.text and drop suppress_bind_attrs
fbdev: omapfb/dvi: Don't put .remove() in .exit.text and drop suppress_bind_attrs
...
Yujie Liu [Tue, 31 Oct 2023 04:13:05 +0000 (12:13 +0800)]
tracing/kprobes: Fix the order of argument descriptions
The order of descriptions should be consistent with the argument list of
the function, so "kretprobe" should be the second one.
int __kprobe_event_gen_cmd_start(struct dynevent_cmd *cmd, bool kretprobe,
const char *name, const char *loc, ...)
Link: https://lore.kernel.org/all/20231031041305.3363712-1-yujie.liu@intel.com/
Fixes:
2a588dd1d5d6 ("tracing: Add kprobe event command generation functions")
Suggested-by: Mukesh Ojha <quic_mojha@quicinc.com>
Signed-off-by: Yujie Liu <yujie.liu@intel.com>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Linus Torvalds [Fri, 10 Nov 2023 22:59:30 +0000 (14:59 -0800)]
Merge tag 'drm-next-2023-11-10' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Daniel Vetter:
"Dave's VPN to the big machine died, so it's on me to do fixes pr this
and next week while everyone else is at plumbers.
- big pile of amd fixes, but mostly for hw support newly added in 6.7
- i915 fixes, mostly minor things
- qxl memory leak fix
- vc4 uaf fix in mock helpers
- syncobj fix for DRM_SYNCOBJ_WAIT_FLAGS_WAIT_AVAILABLE"
* tag 'drm-next-2023-11-10' of git://anongit.freedesktop.org/drm/drm: (78 commits)
drm/amdgpu: fix error handling in amdgpu_vm_init
drm/amdgpu: Fix possible null pointer dereference
drm/amdgpu: move UVD and VCE sched entity init after sched init
drm/amdgpu: move kfd_resume before the ip late init
drm/amd: Explicitly check for GFXOFF to be enabled for s0ix
drm/amdgpu: Change WREG32_RLC to WREG32_SOC15_RLC where inst != 0 (v2)
drm/amdgpu: Use correct KIQ MEC engine for gfx9.4.3 (v5)
drm/amdgpu: add smu v13.0.6 pcs xgmi ras error query support
drm/amdgpu: fix software pci_unplug on some chips
drm/amd/display: remove duplicated argument
drm/amdgpu: correct mca debugfs dump reg list
drm/amdgpu: correct acclerator check architecutre dump
drm/amdgpu: add pcs xgmi v6.4.0 ras support
drm/amdgpu: Change extended-scope MTYPE on GC 9.4.3
drm/amdgpu: disable smu v13.0.6 mca debug mode by default
drm/amdgpu: Support multiple error query modes
drm/amdgpu: refine smu v13.0.6 mca dump driver
drm/amdgpu: Do not program PF-only regs in hdp_v4_0.c under SRIOV (v2)
drm/amdgpu: Skip PCTL0_MMHUB_DEEPSLEEP_IB write in jpegv4.0.3 under SRIOV
drm: amd: Resolve Sphinx unexpected indentation warning
...
Linus Torvalds [Fri, 10 Nov 2023 20:22:14 +0000 (12:22 -0800)]
Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
"Mostly PMU fixes and a reworking of the pseudo-NMI disabling on broken
MediaTek firmware:
- Move the MediaTek GIC quirk handling from irqchip to core. Before
the merging window commit
44bd78dd2b88 ("irqchip/gic-v3: Disable
pseudo NMIs on MediaTek devices w/ firmware issues") temporarily
addressed this issue. Fixed now at a deeper level in the arch code
- Reject events meant for other PMUs in the CoreSight PMU driver,
otherwise some of the core PMU events would disappear
- Fix the Armv8 PMUv3 driver driver to not truncate 64-bit registers,
causing some events to be invisible
- Remove duplicate declaration of __arm64_sys##name following the
patch to avoid prototype warning for syscalls
- Typos in the elf_hwcap documentation"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64/syscall: Remove duplicate declaration
Revert "arm64: smp: avoid NMI IPIs with broken MediaTek FW"
arm64: Move MediaTek GIC quirk handling from irqchip to core
arm64/arm: arm_pmuv3: perf: Don't truncate 64-bit registers
perf: arm_cspmu: Reject events meant for other PMUs
Documentation/arm64: Fix typos in elf_hwcaps
Linus Torvalds [Fri, 10 Nov 2023 19:57:51 +0000 (11:57 -0800)]
Merge tag 'sound-fix-6.7-rc1' of git://git./linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of fixes for rc1.
The majority of changes are various ASoC driver-specific small fixes
and usual HD-audio quirks, while there are a couple of core changes: a
fix in ALSA core procfs code to avoid deadlocks at disconnection and
an ASoC core fix for DAPM clock widgets"
* tag 'sound-fix-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
OSS: dmasound/paula: Convert to platform remove callback returning void
ALSA: hda: ASUS UM5302LA: Added quirks for cs35L41/
10431A83 on i2c bus
ALSA: info: Fix potential deadlock at disconnection
ASoC: nau8540: Add self recovery to improve capture quility
ALSA: hda/realtek: Add support dual speaker for Dell
ALSA: hda: Add ASRock X670E Taichi to denylist
ALSA: hda/realtek: Add quirk for ASUS UX7602ZM
ASoC: SOF: sof-client: trivial: fix comment typo
ASoC: dapm: fix clock get name
ASoC: hdmi-codec: register hpd callback on component probe
ASoC: mediatek: mt8186_mt6366_rt1019_rt5682s: trivial: fix error messages
ASoC: da7219: Improve system suspend and resume handling
ASoC: codecs: Modify macro value error
ASoC: codecs: Modify the wrong judgment of re value
ASoC: codecs: Modify the maximum value of calib
ASoC: amd: acp: fix for i2s mode register field update
ASoC: codecs: aw88399: Fix -Wuninitialized in aw_dev_set_vcalb()
ASoC: rt712-sdca: fix speaker route missing issue
ASoC: rockchip: Fix unused rockchip_i2s_tdm_match warning for !CONFIG_OF
ASoC: ti: omap-mcbsp: Fix runtime PM underflow warnings
Daniel Vetter [Fri, 10 Nov 2023 19:51:37 +0000 (20:51 +0100)]
Merge tag 'amd-drm-next-6.7-2023-11-10' of https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-next-6.7-2023-11-10:
amdgpu:
- SR-IOV fixes
- DMCUB fixes
- DCN3.5 fixes
- DP2 fixes
- SubVP fixes
- SMU14 fixes
- SDMA4.x fixes
- Suspend/resume fixes
- AGP regression fix
- UAF fixes for some error cases
- SMU 13.0.6 fixes
- Documentation fixes
- RAS fixes
- Hotplug fixes
- Scheduling entity ordering fix
- GPUVM fixes
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231110190703.4741-1-alexander.deucher@amd.com
Linus Torvalds [Fri, 10 Nov 2023 19:44:38 +0000 (11:44 -0800)]
Merge tag 'spi-fix-v6.7-merge-window' of git://git./linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A couple of fixes that came in during the merge window: one Kconfig
dependency fix and another fix for a long standing issue where a sync
transfer races with system suspend"
* tag 'spi-fix-v6.7-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: Fix null dereference on suspend
spi: spi-zynq-qspi: add spi-mem to driver kconfig dependencies
Linus Torvalds [Fri, 10 Nov 2023 19:40:38 +0000 (11:40 -0800)]
Merge tag 'mmc-v6.7-2' of git://git./linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"MMC core:
- Fix broken cache-flush support for Micron eMMCs
- Revert 'mmc: core: Capture correct oemid-bits for eMMC cards'
MMC host:
- sdhci_am654: Fix TAP value parsing for legacy speed mode
- sdhci-pci-gli: Fix support for ASPM mode for GL9755/GL9750
- vub300: Fix an error path in probe"
* tag 'mmc-v6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci-pci-gli: GL9750: Mask the replay timer timeout of AER
mmc: sdhci-pci-gli: GL9755: Mask the replay timer timeout of AER
Revert "mmc: core: Capture correct oemid-bits for eMMC cards"
mmc: vub300: fix an error code
mmc: Add quirk MMC_QUIRK_BROKEN_CACHE_FLUSH for Micron eMMC Q2J54A
mmc: sdhci_am654: fix start loop index for TAP value parsing
Linus Torvalds [Fri, 10 Nov 2023 19:34:16 +0000 (11:34 -0800)]
Merge tag 'pwm/for-6.7-rc1-fixes' of git://git./linux/kernel/git/thierry.reding/linux-pwm
Pull pwm fixes from Thierry Reding:
"This contains two very small fixes that I failed to include in the
main pull request"
* tag 'pwm/for-6.7-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
pwm: Fix double shift bug
pwm: samsung: Fix a bit test in pwm_samsung_resume()
Linus Torvalds [Fri, 10 Nov 2023 19:25:58 +0000 (11:25 -0800)]
Merge tag 'io_uring-6.7-2023-11-10' of git://git.kernel.dk/linux
Pull io_uring fixes from Jens Axboe:
"Mostly just a few fixes and cleanups caused by the read multishot
support.
Outside of that, a stable fix for how a connect retry is done"
* tag 'io_uring-6.7-2023-11-10' of git://git.kernel.dk/linux:
io_uring: do not clamp read length for multishot read
io_uring: do not allow multishot read to set addr or len
io_uring: indicate if io_kbuf_recycle did recycle anything
io_uring/rw: add separate prep handler for fixed read/write
io_uring/rw: add separate prep handler for readv/writev
io_uring/net: ensure socket is marked connected on connect retry
io_uring/rw: don't attempt to allocate async data if opcode doesn't need it
Linus Torvalds [Fri, 10 Nov 2023 19:20:33 +0000 (11:20 -0800)]
Merge tag 'block-6.7-2023-11-10' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
- NVMe pull request via Keith:
- nvme keyring config compile fixes (Hannes and Arnd)
- fabrics keep alive fixes (Hannes)
- tcp authentication fixes (Mark)
- io_uring_cmd error handling fix (Anuj)
- stale firmware attribute fix (Daniel)
- tcp memory leak (Christophe)
- crypto library usage simplification (Eric)
- nbd use-after-free fix. May need a followup, but at least it's better
than what it was before (Li)
- Rate limit write on read-only device warnings (Yu)
* tag 'block-6.7-2023-11-10' of git://git.kernel.dk/linux:
nvme: keyring: fix conditional compilation
nvme: common: make keyring and auth separate modules
blk-core: use pr_warn_ratelimited() in bio_check_ro()
nbd: fix uaf in nbd_open
nvme: start keep-alive after admin queue setup
nvme-loop: always quiesce and cancel commands before destroying admin q
nvme-tcp: avoid open-coding nvme_tcp_teardown_admin_queue()
nvme-auth: always set valid seq_num in dhchap reply
nvme-auth: add flag for bi-directional auth
nvme-auth: auth success1 msg always includes resp
nvme: fix error-handling for io_uring nvme-passthrough
nvme: update firmware version after commit
nvme-tcp: Fix a memory leak
nvme-auth: use crypto_shash_tfm_digest()
Linus Torvalds [Fri, 10 Nov 2023 19:15:34 +0000 (11:15 -0800)]
Merge tag 'ata-6.7-rc1-2' of git://git./linux/kernel/git/dlemoal/libata
Pull ata fixes from Damien Le Moal:
- Revert a change in ata_pci_shutdown_one() to suspend disks on
shutdown as this is now done using the manage_shutdown scsi device
flag (me)
- Change the pata_falcon and pata_gayle drivers to stop using
module_platform_driver_probe(). This makes these drivers more inline
with all other drivers (allowing bind/unbind) and suppress a
compilation warning (Uwe)
- Convert the pata_falcon and pata_gayle drivers to the new
.remove_new() void-return callback. These 2 drivers are the last ones
needing this change (Uwe)
* tag 'ata-6.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata: pata_gayle: Convert to platform remove callback returning void
ata: pata_falcon: Convert to platform remove callback returning void
ata: pata_gayle: Stop using module_platform_driver_probe()
ata: pata_falcon: Stop using module_platform_driver_probe()
ata: libata-core: Fix ata_pci_shutdown_one()
Linus Torvalds [Fri, 10 Nov 2023 19:09:07 +0000 (11:09 -0800)]
Merge tag 'dma-mapping-6.7-2023-11-10' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fixes from Christoph Hellwig:
- don't leave pages decrypted for DMA in encrypted memory setups linger
around on failure (Petr Tesarik)
- fix an out of bounds access in the new dynamic swiotlb code (Petr
Tesarik)
- fix dma_addressing_limited for systems with weird physical memory
layouts (Jia He)
* tag 'dma-mapping-6.7-2023-11-10' of git://git.infradead.org/users/hch/dma-mapping:
swiotlb: fix out-of-bounds TLB allocations with CONFIG_SWIOTLB_DYNAMIC
dma-mapping: fix dma_addressing_limited() if dma_range_map can't cover all system RAM
dma-mapping: move dma_addressing_limited() out of line
swiotlb: do not free decrypted pages if dynamic
Linus Torvalds [Fri, 10 Nov 2023 18:58:49 +0000 (10:58 -0800)]
Merge tag 'lsm-pr-
20231109' of git://git./linux/kernel/git/pcmoore/lsm
Pull lsm updates from Paul Moore:
"We've got two small patches to correct the default return
value of two LSM hooks: security_vm_enough_memory_mm() and
security_inode_getsecctx()"
* tag 'lsm-pr-
20231109' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
lsm: fix default return value for inode_getsecctx
lsm: fix default return value for vm_enough_memory
Linus Torvalds [Fri, 10 Nov 2023 18:23:53 +0000 (10:23 -0800)]
Merge tag '6.7-rc-smb3-server-part2' of git://git.samba.org/ksmbd
Pull smb server fixes from Steve French:
- slab out of bounds fix in ACL handling
- fix malformed request oops
- minor doc fix
* tag '6.7-rc-smb3-server-part2' of git://git.samba.org/ksmbd:
ksmbd: handle malformed smb1 message
ksmbd: fix kernel-doc comment of ksmbd_vfs_kern_path_locked()
ksmbd: fix slab out of bounds write in smb_inherit_dacl()
Linus Torvalds [Fri, 10 Nov 2023 17:52:56 +0000 (09:52 -0800)]
Merge tag 'ceph-for-6.7-rc1' of https://github.com/ceph/ceph-client
Pull ceph updates from Ilya Dryomov:
- support for idmapped mounts in CephFS (Christian Brauner, Alexander
Mikhalitsyn).
The series was originally developed by Christian and later picked up
and brought over the finish line by Alexander, who also contributed
an enabler on the MDS side (separate owner_{u,g}id fields on the
wire).
The required exports for mnt_idmap_{get,put}() in VFS have been acked
by Christian and received no objection from Christoph.
- a churny change in CephFS logging to include cluster and client
identifiers in log and debug messages (Xiubo Li).
This would help in scenarios with dozens of CephFS mounts on the same
node which are getting increasingly common, especially in the
Kubernetes world.
* tag 'ceph-for-6.7-rc1' of https://github.com/ceph/ceph-client:
ceph: allow idmapped mounts
ceph: allow idmapped atomic_open inode op
ceph: allow idmapped set_acl inode op
ceph: allow idmapped setattr inode op
ceph: pass idmap to __ceph_setattr
ceph: allow idmapped permission inode op
ceph: allow idmapped getattr inode op
ceph: pass an idmapping to mknod/symlink/mkdir
ceph: add enable_unsafe_idmap module parameter
ceph: handle idmapped mounts in create_request_message()
ceph: stash idmapping in mdsc request
fs: export mnt_idmap_get/mnt_idmap_put
libceph, ceph: move mdsmap.h to fs/ceph
ceph: print cluster fsid and client global_id in all debug logs
ceph: rename _to_client() to _to_fs_client()
ceph: pass the mdsc to several helpers
libceph: add doutc and *_client debug macros support
Linus Torvalds [Fri, 10 Nov 2023 17:23:17 +0000 (09:23 -0800)]
Merge tag 'riscv-for-linus-6.7-mw2' of git://git./linux/kernel/git/riscv/linux
Pull more RISC-V updates from Palmer Dabbelt:
- Support for handling misaligned accesses in S-mode
- Probing for misaligned access support is now properly cached and
handled in parallel
- PTDUMP now reflects the SW reserved bits, as well as the PBMT and
NAPOT extensions
- Performance improvements for TLB flushing
- Support for many new relocations in the module loader
- Various bug fixes and cleanups
* tag 'riscv-for-linus-6.7-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (51 commits)
riscv: Optimize bitops with Zbb extension
riscv: Rearrange hwcap.h and cpufeature.h
drivers: perf: Do not broadcast to other cpus when starting a counter
drivers: perf: Check find_first_bit() return value
of: property: Add fw_devlink support for msi-parent
RISC-V: Don't fail in riscv_of_parent_hartid() for disabled HARTs
riscv: Fix set_memory_XX() and set_direct_map_XX() by splitting huge linear mappings
riscv: Don't use PGD entries for the linear mapping
RISC-V: Probe misaligned access speed in parallel
RISC-V: Remove __init on unaligned_emulation_finish()
RISC-V: Show accurate per-hart isa in /proc/cpuinfo
RISC-V: Don't rely on positional structure initialization
riscv: Add tests for riscv module loading
riscv: Add remaining module relocations
riscv: Avoid unaligned access when relocating modules
riscv: split cache ops out of dma-noncoherent.c
riscv: Improve flush_tlb_kernel_range()
riscv: Make __flush_tlb_range() loop over pte instead of flushing the whole tlb
riscv: Improve flush_tlb_range() for hugetlb pages
riscv: Improve tlb_flush()
...
Linus Torvalds [Fri, 10 Nov 2023 17:19:46 +0000 (09:19 -0800)]
Merge tag 'mips_6.7' of git://git./linux/kernel/git/mips/linux
Pull MIPS updates from Thomas Bogendoerfer:
- removed AR7 platform support
- cleanups and fixes
* tag 'mips_6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: AR7: remove platform
watchdog: ar7_wdt: remove driver to prepare for platform removal
vlynq: remove bus driver
mtd: parsers: ar7: remove support
serial: 8250: remove AR7 support
arch: mips: remove ReiserFS from defconfig
MIPS: lantiq: Remove unnecessary include of <linux/of_irq.h>
MIPS: lantiq: Fix pcibios_plat_dev_init() "no previous prototype" warning
MIPS: KVM: Fix a build warning about variable set but not used
MIPS: Remove dead code in relocate_new_kernel
mips: dts: ralink: mt7621: rename to GnuBee GB-PC1 and GnuBee GB-PC2
mips: dts: ralink: mt7621: define each reset as an item
mips: dts: ingenic: Remove unneeded probe-type properties
MIPS: loongson32: Remove dma.h and nand.h
Christian König [Tue, 31 Oct 2023 14:35:27 +0000 (15:35 +0100)]
drm/amdgpu: fix error handling in amdgpu_vm_init
When clearing the root PD fails we need to properly release it again.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Felix Kuehling [Tue, 31 Oct 2023 17:30:00 +0000 (13:30 -0400)]
drm/amdgpu: Fix possible null pointer dereference
mem = bo->tbo.resource may be NULL in amdgpu_vm_bo_update.
Fixes:
180253782038 ("drm/ttm: stop allocating dummy resources during BO creation")
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Alex Deucher [Wed, 8 Nov 2023 14:40:44 +0000 (09:40 -0500)]
drm/amdgpu: move UVD and VCE sched entity init after sched init
We need kernel scheduling entities to deal with handle clean up
if apps are not cleaned up properly. With commit
56e449603f0ac5
("drm/sched: Convert the GPU scheduler to variable number of run-queues")
the scheduler entities have to be created after scheduler init, so
change the ordering to fix this.
v2: Leave logic in UVD and VCE code
Fixes:
56e449603f0a ("drm/sched: Convert the GPU scheduler to variable number of run-queues")
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Luben Tuikov <ltuikov89@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: ltuikov89@gmail.com
Tim Huang [Thu, 19 Oct 2023 07:50:43 +0000 (15:50 +0800)]
drm/amdgpu: move kfd_resume before the ip late init
The kfd_resume needs to touch GC registers to enable the interrupts,
it needs to be done before GFXOFF is enabled to ensure that the GFX is
not off and GC registers can be touched. So move kfd_resume before the
amdgpu_device_ip_late_init which enables the CGPG/GFXOFF.
Signed-off-by: Tim Huang <Tim.Huang@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Mario Limonciello [Thu, 9 Nov 2023 17:23:46 +0000 (11:23 -0600)]
drm/amd: Explicitly check for GFXOFF to be enabled for s0ix
If a user has disabled GFXOFF this may cause problems for the suspend
sequence. Ensure that it is enabled in amdgpu_acpi_is_s0ix_active().
The system won't reach the deepest state but it also won't hang.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Daniel Vetter [Fri, 10 Nov 2023 15:54:41 +0000 (16:54 +0100)]
Merge tag 'drm-misc-fixes-2023-11-08' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-fixes for v6.7-rc1:
qxl:
- qxl memory leak fix.
syncobj:
- Fix waiting for DRM_SYNCOBJ_WAIT_FLAGS_WAIT_AVAILABLE
vc4:
- Fix UAF in mock helpers
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
[sima: Stitch together both changelogs from Maarten. Also because of
branch history this contains a few more bugfixes which are already in
v6.6, but I didn't feel like this justifies some backmerge since there
wasn't any real conflict.]
Link: https://patchwork.freedesktop.org/patch/msgid/bc8598ee-d427-4616-8ebd-64107ab9a2d8@linux.intel.com
Daniel Vetter [Fri, 10 Nov 2023 15:43:44 +0000 (16:43 +0100)]
Merge tag 'drm-intel-next-fixes-2023-11-08' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
drm/i915 fixes for v6.7-rc1:
- Fix null dereference when perf interface is not available
- Fix a -Wstringop-overflow warning
- Fix a -Wformat-truncation warning in intel_tc_port_init
- Flush WC GGTT only on required platforms
- Fix MTL HBR3 rate support on C10 phy and eDP
- Fix MTL notify_guc for multi-GT
- Bump GLK CDCLK frequency when driving multiple pipes
- Fix potential spectre vulnerability
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/878r78xrxd.fsf@intel.com
Steve French [Thu, 20 Jul 2023 13:30:32 +0000 (08:30 -0500)]
cifs: update internal module version number for cifs.ko
From 2.45 to 2.46
Signed-off-by: Steve French <stfrench@microsoft.com>
Shyam Prasad N [Fri, 13 Oct 2023 11:40:09 +0000 (11:40 +0000)]
cifs: handle when server stops supporting multichannel
When a server stops supporting multichannel, we will
keep attempting reconnects to the secondary channels today.
Avoid this by freeing extra channels when negotiate
returns no multichannel support.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Shyam Prasad N [Fri, 13 Oct 2023 11:33:21 +0000 (11:33 +0000)]
cifs: handle when server starts supporting multichannel
When the user mounts with multichannel option, but the
server does not support it, there can be a time in future
where it can be supported.
With this change, such a case is handled.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Steve French [Fri, 10 Nov 2023 07:24:16 +0000 (01:24 -0600)]
Missing field not being returned in ioctl CIFS_IOC_GET_MNT_INFO
The tcon_flags field was always being set to zero in the information
about the mount returned by the ioctl CIFS_IOC_GET_MNT_INFO instead
of being set to the value of the Flags field in the tree connection
structure as intended.
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Helge Deller [Fri, 10 Nov 2023 15:13:15 +0000 (16:13 +0100)]
parisc: Prevent booting 64-bit kernels on PA1.x machines
Bail out early with error message when trying to boot a 64-bit kernel on
32-bit machines. This fixes the previous commit to include the check for
true 64-bit kernels as well.
Signed-off-by: Helge Deller <deller@gmx.de>
Fixes:
591d2108f3abc ("parisc: Add runtime check to prevent PA2.0 kernels on PA1.x machines")
Cc: <stable@vger.kernel.org> # v6.0+
projects / linux-block.git / log