arm64: dts: qcom: sdx75: Add QPIC NAND support

Add devicetree node to enable support for QPIC NAND controller on Qualcomm
SDX75 platform.

Signed-off-by: Kaushal Kumar <quic_kaushalk@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250415072756.20046-5-quic_kaushalk@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sdx75: Add QPIC BAM support

Add devicetree node to enable support for QPIC BAM DMA controller on
Qualcomm SDX75 platform.

Signed-off-by: Kaushal Kumar <quic_kaushalk@quicinc.com>
Link: https://lore.kernel.org/r/20250415072756.20046-4-quic_kaushalk@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: qcm2290: Add crypto engine

Add Qualcomm Crypto Engine (QCE) and BAM related nodes for this SoC.

Signed-off-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250331123641.1590573-1-loic.poulain@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: x1e80100-vivobook-s15: Add bluetooth

Add bluetooth for the asus vivobook s15
Describe wlan configuration

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Maud Spierings <maud_spierings@hotmail.com>
Link: https://lore.kernel.org/r/20250328-asus_qcom_display-v7-1-322d2bff937d@hotmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: x1e80100: Add PCIe lane equalization preset properties

Add PCIe lane equalization preset properties for 8 GT/s and 16 GT/s data
rates used in lane equalization procedure.

Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20250328-preset_v6-v9-1-22cfa0490518@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: qcs615: Fix up UFS clocks

The clocks are out of order with the bindings' expectations.

Reorder them to resolve the errors.

Fixes: a6a9d10e7969 ("arm64: dts: qcom: qcs615: add UFS node")
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250327-topic-more_dt_bindings_fixes-v2-12-b763d958545f@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sa8775p: Clean up the PSCI PDs

Because SA8775P comes with two disjoint CPU clusters, we have to follow
a similar topology description like the one in sm8750.dtsi, so:

system_pd
cluster0_pd
cpu_pd0
...
cluster1_pd
cpu_pd4
...

Do that & wire it up to APPS RSC to make the bindings checker happy.

Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250327-topic-more_dt_bindings_fixes-v2-11-b763d958545f@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: msm8996-oneplus: Add SLPI VDD_PX

The PX line powers some hardware related to sensors. Assume the board
doesn't reinvent what MTP has established and hook up LVS2 @ 1.8V as
such.

This fixes the 'is required' type of bindings validator errors.

Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250327-topic-more_dt_bindings_fixes-v2-10-b763d958545f@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm6350-pdx213: Wire up USB regulators

Wire up the regulators based on the downstream release to appease the
devicetree checker.

Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250327-topic-more_dt_bindings_fixes-v2-9-b763d958545f@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: msm8998-yoshino: Add QUSB2PHY VDD supply

Set the supply as required by bindings, to silence the warning:

'vdd-supply' is a required property

The value is inferred from MTP schematics, but it shouldn't change
between boards due to specific electrical characteristics.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250327-topic-more_dt_bindings_fixes-v2-8-b763d958545f@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: msm8998-mtp: Add QUSB2PHY VDD supply

Set the supply as required by bindings, to silence the warning:

'vdd-supply' is a required property

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250327-topic-more_dt_bindings_fixes-v2-7-b763d958545f@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: msm8998-fxtec: Add QUSB2PHY VDD supply

Set the supply as required by bindings, to silence the warning:

'vdd-supply' is a required property

The value is inferred from MTP schematics, but it shouldn't change
between boards due to specific electrical characteristics.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250327-topic-more_dt_bindings_fixes-v2-6-b763d958545f@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: qcs615: Remove disallowed property from AOSS_QMP node

AOSS_QMP is not allowed to be a power domain provider, remove the
associated -cells property.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250327-topic-more_dt_bindings_fixes-v2-5-b763d958545f@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: msm8998: Remove mdss_hdmi_phy phandle argument

The node has #clock-cells = <0>, as it only provides a single clock
output.

This leads to a turbo sneaky bug, where the dt checker shows that we
have additional clocks in the array:

clock-controller@c8c0000: clocks: [[3, 0], [39, 178], [156, 1],
[156, 0], [157, 1], [157, 0], [158], [0], [0], [0], [39, 184]]
is too long

..which happens due to dtc interpreting <&mdss_hdmi_phy 0> as
<&mdss_hdmi_phy>, <0> after taking cells into account.

Remove the superfluous argument to both silence the warning and fix
the index-based lookup of subsequent entries in "clocks".

Fixes: 2150c87db80c ("arm64: dts: qcom: msm8998: add HDMI nodes")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250327-topic-more_dt_bindings_fixes-v2-4-b763d958545f@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sdm845: Add specific APPS RSC compatible

SDM845 comes in a couple firmware flavors, some of which don't support
PSCI in OSI mode. That prevents the power domain exepcted by the RSC
node from providing useful information on system power collapse.

Use the platform-specific compatible to allow not passing one.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250327-topic-more_dt_bindings_fixes-v2-3-b763d958545f@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sc7180: Add specific APPS RSC compatible

SC7180 comes in a couple firmware flavors, some of which don't support
PSCI in OSI mode. That prevents the power domain exepcted by the RSC
node from providing useful information on system power collapse.

Use the platform-specific compatible to allow not passing one.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250327-topic-more_dt_bindings_fixes-v2-2-b763d958545f@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: ipq5332-rdp441: Enable PCIe phys and controllers

Enable the PCIe controller and PHY nodes for RDP 441.

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com>
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Link: https://lore.kernel.org/r/20250317100029.881286-5-quic_varada@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: ipq5332: Add PCIe related nodes

Add phy and controller nodes for pcie0_x1 and pcie1_x2.

Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com>
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250317100029.881286-4-quic_varada@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: ipq9574: Add MHI to pcie nodes

Append the MHI range to the pcie nodes. Append the MHI register range to
IPQ9574. This is an optional range used by the dwc controller driver to
print debug stats via the debugfs file 'link_transition_count'.

Convert reg-names to vertical list.

Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250317100029.881286-3-quic_varada@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sar2130p: add display nodes

Add display controller, two DSI hosts, two DSI PHYs and a single DP
controller. Link DP to the QMP Combo PHY.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250308-sar2130p-display-v1-10-1d4c30f43822@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sdm845-starqltechn: add modem support

Add support for modem and ipa(IP Accelerator).
Add spss reserved memory node.

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Link: https://lore.kernel.org/r/20250225-starqltechn_integration_upstream-v9-12-a5d80375cb66@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sdm845-starqltechn: add graphics support

Add support for gpu and panel.

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Link: https://lore.kernel.org/r/20250225-starqltechn_integration_upstream-v9-11-a5d80375cb66@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sdm845-starqltechn: add initial sound support

Add support for sound (headphones and mics only)
Also redefine slpi reserved memory, because adsp_mem overlaps with
slpi_mem inherited from sdm845.dtsi.

Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Link: https://lore.kernel.org/r/20250225-starqltechn_integration_upstream-v9-10-a5d80375cb66@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: qrb2210-rb1: add Bluetooth support

Add support for the onboard WCN3950 BT/WiFi chip. Corresponding firmware
has been merged to linux-firmware and should be available in the next
release.

Bluetooth: hci0: setting up wcn399x
Bluetooth: hci0: QCA Product ID   :0x0000000f
Bluetooth: hci0: QCA SOC Version  :0x40070120
Bluetooth: hci0: QCA ROM Version  :0x00000102
Bluetooth: hci0: QCA Patch Version:0x00000001
Bluetooth: hci0: QCA controller version 0x01200102
Bluetooth: hci0: QCA Downloading qca/cmbtfw12.tlv
Bluetooth: hci0: QCA Downloading qca/cmnv12.bin
Bluetooth: hci0: QCA setup on UART is completed

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250207-rb1-bt-v4-6-d810fc8c94a9@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: qcm2290: fix (some) of QUP interconnects

While adding interconnect support for the QCM2290 platform some of them
got the c&p error, rogue MASTER_APPSS_PROC for the config_noc
interconnect. Turn that into SLAVE_QUP_0 as expected.

Fixes: 5b970ff0193d ("arm64: dts: qcom: qcm2290: Hook up interconnects")
Reported-by: Konrad Dybcio <konradybcio@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250207-rb1-bt-v4-4-d810fc8c94a9@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sc8280xp-crd: Enable SLPI

Enable the SLPI remoteproc and declare the firmware path.

Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250517-topic-8280_slpi-v2-5-1f96f86ac3ae@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sc8280xp-lenovo-thinkpad-x13s: enable sensors DSP

Enable SLPI / Sensors DSP present on the SC8280XP platforms / Lenovo
X13s laptop.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250517-topic-8280_slpi-v2-4-1f96f86ac3ae@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sc8280xp: Add SLPI

SC8280XP features a SLPI (Sensor Low Power Island) core. Describe it.

Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250517-topic-8280_slpi-v2-3-1f96f86ac3ae@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sc8280xp: Fix node order

Certain /soc@0 subnodes are very out of order. Reshuffle them.

Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250517-topic-8280_slpi-v2-2-1f96f86ac3ae@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: x1e80100: Enable cpufreq

Enable cpufreq on X1E80100 SoCs through the SCMI perf protocol node.

Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Link: https://lore.kernel.org/r/20241030130840.2890904-3-quic_sibis@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: x1e80100: Add cpucp mailbox and sram nodes

Add the cpucp mailbox and sram nodes required by SCMI perf protocol
on X1E80100 SoCs.

Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Link: https://lore.kernel.org/r/20241030130840.2890904-2-quic_sibis@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: x1e80100-hp-x14: drop bogus USB retimer

Jens reported that the sanity checks added to the new ps883x USB retimer
driver breaks USB and display on the HP X14. Turns out the X14 only has
a retimer on one of the ports, but this initially went unnoticed due to
the missing sanity check (and error handling) in the retimer driver.

Drop the non-existing retimer from the devicetree to enable the second
USB port and the display subsystem.

Note that this also matches the ACPI tables.

Fixes: 6f18b8d4142c ("arm64: dts: qcom: x1e80100-hp-x14: dt for HP Omnibook X Laptop 14")
Cc: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
Tested-by: Juerg Haefliger <juerg.haefliger@canonical.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20250328084154.16759-1-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: x1e78100-t14s: Enable audio headset support

On Lenovo ThinkPad T14s, the headset is connected via a HiFi mux to
support CTIA and OMTP headsets. This switch is used to minimise pop and
click during headset type switching.

Enable the mux controls required to power this switch along with wiring up
gpio that control the headset switching.

Without this, headset audio will be very noisy and might see headset
detection errors.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Christopher Obbard <christopher.obbard@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20250327100633.11530-7-srinivas.kandagatla@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: x1e78100-t14s: enable SDX62 modem

Enable PCIe5 and the SDX62 modem present on some T14s.

Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20250327081427.19693-1-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: x1e80100-hp-elitebook-ultra-g1q: DT for HP EliteBook Ultra G1q

Introduce a device tree for the HP EliteBook Ultra G1q 14" AI laptop. It
seems to be using the same baseboard as the HP OmniBook X 14 so just use
that for now.

Signed-off-by: Juerg Haefliger <juerg.haefliger@canonical.com>
Link: https://lore.kernel.org/r/20250429144957.2088284-4-juerg.haefliger@canonical.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

dt-bindings: arm: qcom: Document HP EliteBook Ultra G1q

Add a compatible for the HP EliteBook Ultra G1q 14 inch Notebook AI PC.
The laptop is based on the Snapdragon X Elite (x1e80100) SoC.

link: http://www8.hp.com/h20195/v2/GetDocument.aspx?docname=c08996392
Signed-off-by: Juerg Haefliger <juerg.haefliger@canonical.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250429144957.2088284-3-juerg.haefliger@canonical.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: x1e80100-hp-omnibook-x14: add sound label

Add a label to the sound node to make it easier to override from other
nodes.

Signed-off-by: Juerg Haefliger <juerg.haefliger@canonical.com>
Link: https://lore.kernel.org/r/20250429144957.2088284-2-juerg.haefliger@canonical.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8650: add the missing l2 cache node

Only two little a520s share the same L2, every a720 has their own L2
cache.

Fixes: d2350377997f ("arm64: dts: qcom: add initial SM8650 dtsi")
Signed-off-by: Pengyu Luo <mitltlatltl@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250405105529.309711-1-mitltlatltl@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: x1e001de-devkit: Enable support for both Type-A USB ports

The Qualcomm X Elite Devkit has 2 USB-A ports, both connected to the USB
multiport controller, each one via a separate NXP PTN3222 eUSB2-to-USB2
redriver to the eUSB2 PHY for High-Speed support, with a dedicated QMP
PHY for SuperSpeed support.

Describe each redriver and then enable each pair of PHYs and the
USB controller itself, in order to enable support for the 2 USB-A ports.

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250324-x1e001de-devkit-dts-enable-usb-a-ports-v1-1-81153b2d1edf@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: Add industrial mezzanine support for qcs6490-rb3gen2

Add DTS support for Qualcomm qcs6490-rb3gen2 industrial mezzanine board.

Signed-off-by: Sahil Chandna <quic_chandna@quicinc.com>
Signed-off-by: Nirmesh Kumar Singh <quic_nkumarsi@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250323123333.1622860-1-quic_nkumarsi@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: x1e80100-hp-omnibook-x14: Enable SMB2360 0 and 1

Commit d37e2646c8a5 ("arm64: dts: qcom: x1e80100-pmics: Enable all SMB2360
separately") disables all SMB2360s and let the board DTS explicitly enable
them. The HP OmniBook DTS is from before this change and is missing the
explicit enabling. Add that to get all USB root ports.

Fixes: 6f18b8d4142c ("arm64: dts: qcom: x1e80100-hp-x14: dt for HP Omnibook X Laptop 14")
Cc: stable@vger.kernel.org # 6.14
Signed-off-by: Juerg Haefliger <juerg.haefliger@canonical.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20250319160509.1812805-1-juerg.haefliger@canonical.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: ipq5018: enable the download mode support

Enable support for download mode to collect RAM dumps in case of a
system crash, allowing post mortem analysis.

Signed-off-by: George Moussalem <george.moussalem@outlook.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250512-ipq5018-syscon-v1-2-eb1ad2414c3c@outlook.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: msm8998-lenovo-miix-630: add Venus node

Enable Venus on Lenovo Miix 630 and specify corresponding firmware file.

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Link: https://lore.kernel.org/r/20250425-miix-630-venus-v2-1-cdfca385a0c8@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: ipq5018: Enable PCIe

Enable the PCIe controller and PHY nodes for RDP 432-c2.

Signed-off-by: Nitheesh Sekar <quic_nsekar@quicinc.com>
Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
Link: https://lore.kernel.org/r/20250514-ipq5018-pcie-v10-2-5b42a8eff7ea@outlook.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: ipq5018: Add PCIe related nodes

Add phy and controller nodes for a 2-lane Gen2 and
a 1-lane Gen2 PCIe bus. IPQ5018 has 8 MSI SPI interrupts and
one global interrupt.

NOTE: the PCIe controller supports gen3, yet the phy is limited to gen2.

Signed-off-by: Nitheesh Sekar <quic_nsekar@quicinc.com>
Signed-off-by: Sricharan R <quic_srichara@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
Link: https://lore.kernel.org/r/20250514-ipq5018-pcie-v10-1-5b42a8eff7ea@outlook.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8350: Fix typo in pil_camera_mem node

There is a typo in sm8350.dts where the node label
mmeory@85200000 should be memory@85200000.
This patch corrects the typo for clarity and consistency.

Fixes: b7e8f433a673 ("arm64: dts: qcom: Add basic devicetree support for SM8350 SoC")
Cc: stable@vger.kernel.org
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Link: https://lore.kernel.org/r/20250514114656.2307828-1-alok.a.tiwari@oracle.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: x1e80100-romulus: Enable DP over Type-C

Both ports seem to work, just like on other X1E laptops.

Tested with a Type-C-to-HDMI2.0 dock (translating into up to 2 DP lanes
worth of bandwidth).

Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250514-topic-romu_dp-v1-1-6242d6acb5e5@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: qcs615: add QCrypto nodes

Add the QCE and Crypto BAM DMA nodes.

Signed-off-by: Abhinaba Rakshit <quic_arakshit@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250318-enable-qce-for-qcs615-v2-2-c5e05fe22572@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: qcm6490-fairphone-fp5: Add DisplayPort sound support

Add the required nodes for sound playback via a connected external
display (DisplayPort over USB-C).

In user space just the following route needs to be set (e.g. using
ALSA UCM):

  amixer -c0 cset name='DISPLAY_PORT_RX Audio Mixer MultiMedia1' 1

Afterwards one can play audio on the MultiMedia1 sound device, e.g.:

  aplay -D plughw:0,0 test.wav

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20250507-fp5-dp-sound-v4-5-4098e918a29e@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sa8775p: Add default pin configurations for QUP SEs

Default pinctrl configurations for all QUP (Qualcomm Universal Peripheral)
Serial Engines (SEs) are missing in the SoC device tree. These
configurations are required by client teams when enabling any SEs as I2C,
SPI, or Serial protocols.

Add default pin configurations for Serial Engines (SEs) for all supported
protocols, including I2C, SPI, and UART, to the sa8775p device tree.  This
change facilitates slave device driver clients to enable usecase with
minimal modifications.

Remove duplicate pin configurations from target-specific file as same pin
configuration is included in the SoC device tree.

Acked-by: Mukesh Kumar Savaliya <quic_msavaliy@quicinc.com>
Signed-off-by: Viken Dadhaniya <quic_vdadhani@quicinc.com>
Link: https://lore.kernel.org/r/20250509090443.4107378-1-quic_vdadhani@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8550: add iris DT node

Add DT entries for the sm8550 iris decoder.

Since the firmware is required to be signed, only enable
on Qualcomm development boards where the firmware is
publicly distributed.

Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250509-topic-sm8x50-upstream-iris-8550-dt-v4-1-22ced9179da3@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8750: Add LLCC node

Add LLCC node for SM8750 SoC.

Signed-off-by: Melody Olvera <melody.olvera@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250512-sm8750_llcc_master-v5-4-d78dca6282a5@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sdm845-xiaomi-beryllium-ebbg: introduce touchscreen support

Enable the Focaltech FT8719 touchscreen controller used in the Poco F1
(EBBG) panel variant.

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Joel Selvaraj <foss@joelselvaraj.com>
Link: https://lore.kernel.org/r/20250506-pocof1-touchscreen-support-v4-4-bfb53da52945@joelselvaraj.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sdm845-xiaomi-beryllium-tianma: introduce touchscreen support

Enable the Novatek NT36672A touchscreen controller used in the Poco F1
(Tianma) panel variant.

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Joel Selvaraj <foss@joelselvaraj.com>
Link: https://lore.kernel.org/r/20250506-pocof1-touchscreen-support-v4-3-bfb53da52945@joelselvaraj.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sdm845-xiaomi-beryllium-common: add touchscreen related nodes

Enable qupv3_id_1 and gpi_dma1 as they are required for configuring
touchscreen. Also add pinctrl configurations needed for touchscreen.
These are common for both the tianma and ebbg touchscreen variant.
In the subsequent patches, we will enable support for the Novatek NT36672a
touchscreen and FocalTech FT8719 touchscreen that are used in the Poco F1
Tianma and EBBG panel variant respectively. This is done in preparation
for that.

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Joel Selvaraj <foss@joelselvaraj.com>
Link: https://lore.kernel.org/r/20250506-pocof1-touchscreen-support-v4-2-bfb53da52945@joelselvaraj.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: qcs8300: add the pcie smmu node

Add the PCIe SMMU node to enable address translations
for pcie.

Reviewed-by: Dmitry Baryshkov <lumag@kernel.org>
Signed-off-by: Pratyush Brahma <quic_pbrahma@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250508-qcs8300-pcie-smmu-v3-1-c6b4453b0b22@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: x1e80100-*: Drop useless DP3 compatible override

Back when display support was added initially to CRD, and we used to have
two separate compatibles for eDP and DP, it was supposed to override the
DP compatible with the eDP one in the board specific devicetree. Since
then, the DP driver has been reworked to figure out the eDP/DP at runtime
while only DP compatible remained in the end.

Even though the override does nothing basically, drop it to avoid
further confusion. Drop it from all X Elite based platforms.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250509-x1e80100-dts-drop-useless-dp-compatible-override-v2-1-126db05cb70a@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: msm8953: Add interconnects

Add the nodes for the bimc, pcnoc, snoc and snoc_mm. And wire up the
interconnects where applicable.

Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com>
[luca: Prepare patch for upstream submission]
Signed-off-by: Luca Weiss <luca@lucaweiss.eu>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250420-msm8953-interconnect-v2-2-828715dcb674@lucaweiss.eu
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: msm8953: Add uart_5

Add the node and pinctrl for uart_5 found on the MSM8953 SoC.

Signed-off-by: Felix Kaechele <felix@kaechele.ca>
[luca: Prepare patch for upstream submission]
Signed-off-by: Luca Weiss <luca@lucaweiss.eu>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250406-msm8953-uart_5-v1-1-7e4841674137@lucaweiss.eu
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8350: Use q6asm defines for reg

Use the MSM_FRONTEND_DAI_MULTIMEDIA* defines to make the code more
readable. No functional change intended.

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250425-q6asmdai-defines-v1-11-28308e2ce7d4@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm7325-nothing-spacewar: Use q6asm defines for reg

Use the MSM_FRONTEND_DAI_MULTIMEDIA* defines to make the code more
readable. No functional change intended.

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250425-q6asmdai-defines-v1-10-28308e2ce7d4@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sdm850*: Use q6asm defines for reg

Use the MSM_FRONTEND_DAI_MULTIMEDIA* defines to make the code more
readable. No functional change intended.

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250425-q6asmdai-defines-v1-9-28308e2ce7d4@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sdm845*: Use q6asm defines for reg

Use the MSM_FRONTEND_DAI_MULTIMEDIA* defines to make the code more
readable. No functional change intended.

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250425-q6asmdai-defines-v1-8-28308e2ce7d4@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sc7280: Use q6asm defines for reg

Use the MSM_FRONTEND_DAI_MULTIMEDIA* defines to make the code more
readable. No functional change intended.

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250425-q6asmdai-defines-v1-7-28308e2ce7d4@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sc7180-acer-aspire1: Use q6asm defines for reg

Use the MSM_FRONTEND_DAI_MULTIMEDIA* defines to make the code more
readable. No functional change intended.

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250425-q6asmdai-defines-v1-6-28308e2ce7d4@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: qrb5165-rb5: Use q6asm defines for reg

Use the MSM_FRONTEND_DAI_MULTIMEDIA* defines to make the code more
readable. No functional change intended.

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250425-q6asmdai-defines-v1-5-28308e2ce7d4@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: msm8996*: Use q6asm defines for reg

Use the MSM_FRONTEND_DAI_MULTIMEDIA* defines to make the code more
readable. No functional change intended.

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250425-q6asmdai-defines-v1-4-28308e2ce7d4@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: msm8953: Use q6asm defines for reg

Use the MSM_FRONTEND_DAI_MULTIMEDIA* defines to make the code more
readable. No functional change intended.

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250425-q6asmdai-defines-v1-3-28308e2ce7d4@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: msm8916-modem-qdsp6: Use q6asm defines for reg

Use the MSM_FRONTEND_DAI_MULTIMEDIA* defines to make the code more
readable. No functional change intended.

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250425-q6asmdai-defines-v1-2-28308e2ce7d4@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: apq8096-db820c: Use q6asm defines for reg

Use the MSM_FRONTEND_DAI_MULTIMEDIA* defines to make the code more
readable. No functional change intended.

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250425-q6asmdai-defines-v1-1-28308e2ce7d4@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: qcm6490-fairphone-fp5: Hook up DisplayPort over USB-C

Extend the USB graph to connect the OCP96011 switch, the PTN36502
redriver, the USB controllers and the MDSS, so that DisplayPort over
USB-C is working.

Connect some parts of the graph directly in the SoC dtsi since those
parts are wired up like this in the SoC directly.

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250425-fp5-pmic-glink-dp-v3-4-cc9c2aeb42fb@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: qcm6490-fairphone-fp5: Add OCP96011 audio switch

Add a node for the OCP96011 on the board which is used to handle USB-C
analog audio switch and handles the SBU mux for DisplayPort-over-USB-C.

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20250425-fp5-pmic-glink-dp-v3-3-cc9c2aeb42fb@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: qcm6490-fairphone-fp5: Add PTN36502 redriver

Add a node for the "Type-C USB 3.1 Gen 1 and DisplayPort v1.2 combo
redriver" found on this device.

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20250425-fp5-pmic-glink-dp-v3-2-cc9c2aeb42fb@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm6350: Align reg properties with latest style

While in the past the 'reg' properties were often written using decimal
'0' for #address-cells = <2> & #size-cells = <2>, nowadays the style is
to use hexadecimal '0x0' instead.

Align this dtsi file to the new style to make it consistent, and don't
use mixed 0x0 and 0 anymore.

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250324-sm6350-videocc-v2-1-cc22386433f4@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sc7280: Stop setting dmic01 pinctrl for va-macro

There's devices that don't have a DMIC connected to va-macro, so stop
setting the pinctrl in sc7280.dtsi, but move it to the devices that
actually are using it.

No change in functionality is expected, just some boards with disabled
va-macro are losing the pinctrl (herobrine-r1, villager-r0, zombie*).

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250404-sc7280-va-dmic01-v1-1-2862ddd20c48@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

dt-bindings: arm: qcom: Add SM7150 Google Pixel 4a

Google Pixel 4a (google,sunfish) is a smartphone based on the SM7150 SoC

Signed-off-by: Danila Tikhonov <danila@jiaxyga.com>
Link: https://lore.kernel.org/r/20250422213137.80366-15-danila@jiaxyga.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: msm8939: Drop generic UART pinctrl templates

Remove the generic UART pinctrl templates from msm8939.dtsi and copy the
definition for the custom UART use cases into the board DT files. This
makes it clear that the set of pins/pull etc are specific to the board and
UART use case.

No functional change.

Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Link: https://lore.kernel.org/r/20250422-msm8916-console-pinctrl-v2-6-f345b7a53c91@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: msm8916: Drop generic UART pinctrl templates

Remove the generic UART pinctrl templates from msm8916.dtsi and copy the
definition for the custom UART use cases into the board DT files. This
makes it clear that the set of pins/pull etc are specific to the board and
UART use case.

No functional change.

Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Link: https://lore.kernel.org/r/20250422-msm8916-console-pinctrl-v2-5-f345b7a53c91@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: msm8916-motorola: Use UART1 console pinctrl

The Motorola MSM8916-based smartphones all use UART1 with 2 pins (TX, RX)
as debug UART console, so make use of the new &blsp_uart1_console_default
template. This applies the needed bias-pull-up to avoid garbage input,
bootph-all for U-Boot and avoids having to override the UART pins.

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Link: https://lore.kernel.org/r/20250422-msm8916-console-pinctrl-v2-4-f345b7a53c91@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: msm8919/39: Use UART2 console pinctrl where appropriate

Convert the majority of MSM8916/39-based boards, which use UART2 with 2
pins (TX, RX) for the debug UART console. This adds the needed bias-pull-up
and bootph-all properties to avoid garbage input when UART is disconnected.

apq8016-schneider-hmibsc.dts does not use UART2 as a debug console, so it's
left as-is in this commit.

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Link: https://lore.kernel.org/r/20250422-msm8916-console-pinctrl-v2-3-f345b7a53c91@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: msm8916/39: Introduce new UART console pinctrl

At the moment, msm8916/39.dtsi have two inconsistent UART pinctrl templates
that are used by all the boards:

 - &blsp_uart1_default configures all 4 pins (TX, RX, CTS, RTS), some
   boards then limit this to just RX and TX
 - &blsp_uart2_default only configures 2 pins (TX, RX), even though UART2
   also supports CTS/RTS

It's difficult to define a generic pinctrl template for all UART use cases,
since they are quite different in practice. The main use case for most of
the 40+ MSM8916/39-based boards upstream is the UART debug console. The
current generic template is lacking some properties to work properly:

 - bias-pull-up for RX: Generally, UART is push-pull and does not need pull
   up/down. Both sides drive TX, so RX should never be floating. This is
   why the current pinctrl in msm8916/39.dtsi uses bias-disable. However,
   this assumes that UART is always connected. For the debug console this
   will be rarely the case on mobile devices, only during debugging
   sessions. The rest of the time, the RX pin is floating.

   This has never caused massive problems, but it's obvious now that this
   needs fixing:

    (1) In U-Boot, we have been fighting with problems with autoboot for
        years. Most of the time, there is a single \0 byte ("break event")
        read during boot, which interrupts the autoboot process. I tried to
        work around that by inserting some random delay [1], but it turned
        out this is also not working reliably on all boards.

        What happens is: Since RX is floating, it switches randomly between
        high or low. A long low state is interpreted as "break event" (\0).

    (2) In postmarketOS, we used to have the "magic SysRq key" enabled by
        default for the serial console. We had to disable this at some
        point, because there was a small number of users who were reporting
        sysrq spam in the kernel log, possibly even crashes/panics
        triggered by sysrq.

        What likely happened is: SysRq is triggered by sending a "break
        event", like in (1). With enough luck, you could even trigger any
        of the SysRq actions if the RX pin switches between high and low
        (e.g. because of noise introduced by the LTE radio close by).

   We can fix this using bias-pull-up, but this may be unneeded,
   unexpected, or even unwanted for other UART use cases.

 - bootph-all: U-Boot needs to know which pinctrl to apply during early
   boot stages, so we should specify "bootph-all" for the console UART
   pinctrl. Without bootph-all, the bias-pull-up won't be applied early
   enough in U-Boot to avoid the problem with autoboot in point (1) above.
   It doesn't make sense to specify this for the other UART instances.
   bootph-all is a generic property documented in dt-schema bootph.yaml.

Define these two additional properties only for the debug UART console, by
defining a new pinctrl template specifically for that. In the following
commits, boards will be converted to use these where appropriate.

[1]: https://source.denx.de/u-boot/u-boot/-/commit/ad7e967738a9c639e07cf50b83ffccdf9a8537b0

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Link: https://lore.kernel.org/r/20250422-msm8916-console-pinctrl-v2-2-f345b7a53c91@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: msm8916/39: Move UART pinctrl to board files

In preparation of adding a new console UART specific pinctrl template, move
the pinctrl reference to the board DT part. This forces people porting new
boards to consider what exactly they need for their board.

No functional change for the boards upstream.

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Link: https://lore.kernel.org/r/20250422-msm8916-console-pinctrl-v2-1-f345b7a53c91@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: x1e80100: Fix PCIe 3rd controller DBI size

According to documentation, the DBI range size is 0xf20. So fix it.

Cc: stable@vger.kernel.org # 6.14
Fixes: f8af195beeb0 ("arm64: dts: qcom: x1e80100: Add support for PCIe3 on x1e80100")
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250422-x1e80100-dts-fix-pcie3-dbi-size-v1-1-c197701fd7e4@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: x1e/x1p: Add EL2 overlay for WoA devices

WoA devices using x1e/x1p use android firmware to boot, which notably
includes Gunyah hypervisor. This means that, so far, Linux-based OS
could only boot in EL1 on those devices.

However Windows can replace Gunyah upon boot with it's own hypervisor,
and with the use of tools such as "slbounce", it's possible to do the
same for Linux-based OS, in which case some modifications to the DT are
necessary to facilitate the absence of Gunyah services.

Add a EL2-specific DT overlay and apply it to x1e/x1p WoA devices to
create -el2.dtb for each of them alongside "normal" dtb.

Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Link: https://lore.kernel.org/r/20250503-sc-el2-overlays-v2-5-24e9b4572e15@trvn.ru
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: x1e80100: Add PCIe IOMMU

x1e80100 has an SMMUv3 connected to PCIe which is normally controlled by
Gunyah and is thus transparent to the OS. However if we boot Linux in
EL2, without Gunyah, we need to manage this IOMMU ourselves. To make
that easier, and since the hardware actually exists, just not "usually"
managed by Linux, describe it in the dts as "reserved".

Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Link: https://lore.kernel.org/r/20250503-sc-el2-overlays-v2-4-24e9b4572e15@trvn.ru
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sc8280xp: Add EL2 overlay for WoA devices

WoA devices using sc8280xp use android firmware to boot, which notably
includes QHEE hypervisor. This means that, so far, Linux-based OS could
only boot in EL1 on those devices.

However Windows can replace QHEE upon boot with it's own hypervisor, and
with the use of tools such as "slbounce", it's possible to do the same
for Linux-based OS, in which case some modifications to the DT are
necessary to facilitate the absence of QHEE services.

Add a EL2-specific DT overlay and apply it to sc8280xp WoA devices to
create -el2.dtb for each of them alongside "normal" dtb.

Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Link: https://lore.kernel.org/r/20250503-sc-el2-overlays-v2-3-24e9b4572e15@trvn.ru
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sc8280xp: Add PCIe IOMMU

sc8280xp has an SMMUv3 connected to PCIe which is normally controlled by
QHEE and is thus transparent to the OS. However if we boot Linux in EL2,
without QHEE, we need to manage this IOMMU ourselves. To make that
easier, and since the hardware actually exists, just not "usually"
managed by Linux, describe it in the dts as "reserved".

Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Link: https://lore.kernel.org/r/20250503-sc-el2-overlays-v2-2-24e9b4572e15@trvn.ru
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sc7180: Add EL2 overlay for WoA devices

WoA devices using sc7180 use android firmware to boot, which notably
includes QHEE hypervisor. This means that, so far, Linux-based OS could
only boot in EL1 on those devices.

However Windows can replace QHEE upon boot with it's own hypervisor, and
with the use of tools such as "slbounce", it's possible to do the same
for Linux-based OS, in which case some modifications to the DT are
necessary to facilitate the absence of QHEE services.

Add a EL2-specific DT overlay and apply it to sc7180 WoA devices to
create -el2.dtb for each of them alongside "normal" dtb.

Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Link: https://lore.kernel.org/r/20250503-sc-el2-overlays-v2-1-24e9b4572e15@trvn.ru
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: x1e001de-devkit: Fix pin config for USB0 retimer vregs

Describe the missing power source, bias and direction for each of the USB0
retimer gpio-controlled voltage regulators related pin configuration.

Fixes: 019e1ee32fec ("arm64: dts: qcom: x1e001de-devkit: Enable external DP support")
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20250422-x1e001de-devkit-dts-fix-retimer-gpios-v2-2-0129c4f2b6d7@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: x1e001de-devkit: Describe USB retimers resets pin configs

Currently, on the X Elite Devkit, the pin configuration of the reset
gpios for all three PS8830 USB retimers are left configured by the
bootloader.

Fix that by describing their pin configuration.

Fixes: 019e1ee32fec ("arm64: dts: qcom: x1e001de-devkit: Enable external DP support")
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20250422-x1e001de-devkit-dts-fix-retimer-gpios-v2-1-0129c4f2b6d7@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: x1e80100-qcp: Fix vreg_l2j_1p2 voltage

In the ACPI DSDT table, PPP_RESOURCE_ID_LDO2_J is configured with 1256000
uV instead of the 1200000 uV we have currently in the device tree. Use the
same for consistency and correctness.

Cc: stable@vger.kernel.org
Fixes: af16b00578a7 ("arm64: dts: qcom: Add base X1E80100 dtsi and the QCP dts")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250423-x1e-vreg-l2j-voltage-v1-6-24b6a2043025@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: x1e80100-lenovo-yoga-slim7x: Fix vreg_l2j_1p2 voltage

In the ACPI DSDT table, PPP_RESOURCE_ID_LDO2_J is configured with 1256000
uV instead of the 1200000 uV we have currently in the device tree. Use the
same for consistency and correctness.

Cc: stable@vger.kernel.org
Fixes: 45247fe17db2 ("arm64: dts: qcom: x1e80100: add Lenovo Thinkpad Yoga slim 7x devicetree")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250423-x1e-vreg-l2j-voltage-v1-5-24b6a2043025@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: x1e80100-hp-omnibook-x14: Fix vreg_l2j_1p2 voltage

In the ACPI DSDT table, PPP_RESOURCE_ID_LDO2_J is configured with 1256000
uV instead of the 1200000 uV we have currently in the device tree. Use the
same for consistency and correctness.

Cc: stable@vger.kernel.org
Fixes: 6f18b8d4142c ("arm64: dts: qcom: x1e80100-hp-x14: dt for HP Omnibook X Laptop 14")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250423-x1e-vreg-l2j-voltage-v1-4-24b6a2043025@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: x1e80100-asus-vivobook-s15: Fix vreg_l2j_1p2 voltage

In the ACPI DSDT table, PPP_RESOURCE_ID_LDO2_J is configured with 1256000
uV instead of the 1200000 uV we have currently in the device tree. Use the
same for consistency and correctness.

Cc: stable@vger.kernel.org
Fixes: d0e2f8f62dff ("arm64: dts: qcom: Add device tree for ASUS Vivobook S 15")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250423-x1e-vreg-l2j-voltage-v1-3-24b6a2043025@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: x1e001de-devkit: Fix vreg_l2j_1p2 voltage

In the ACPI DSDT table, PPP_RESOURCE_ID_LDO2_J is configured with 1256000
uV instead of the 1200000 uV we have currently in the device tree. Use the
same for consistency and correctness.

Cc: stable@vger.kernel.org
Fixes: 7b8a31e82b87 ("arm64: dts: qcom: Add X1E001DE Snapdragon Devkit for Windows")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250423-x1e-vreg-l2j-voltage-v1-2-24b6a2043025@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: x1-crd: Fix vreg_l2j_1p2 voltage

In the ACPI DSDT table, PPP_RESOURCE_ID_LDO2_J is configured with 1256000
uV instead of the 1200000 uV we have currently in the device tree. Use the
same for consistency and correctness.

Cc: stable@vger.kernel.org
Fixes: bd50b1f5b6f3 ("arm64: dts: qcom: x1e80100: Add Compute Reference Device")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250423-x1e-vreg-l2j-voltage-v1-1-24b6a2043025@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sc7280: add UFS operating points

Replace the deprecated freq-table-hz property with an operating
points table with all supported frequencies and power levels.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250424-topic-sc7280-upstream-ufs-opps-v1-1-e63494d65f45@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

dt-bindings: arm: qcom: Add Asus Zenbook A14

Document the X1E-78-100 and X1P-42-100/X1-26-100 variants.

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Aleksandrs Vinarskis <alex.vinarskis@gmail.com>
Link: https://lore.kernel.org/r/20250426130203.37659-3-alex.vinarskis@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: qcs8300: Add cpufreq scaling node

Add cpufreq-hw node to support cpufreq scaling on QCS8300.

Signed-off-by: Imran Shaik <quic_imrashai@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250430-qcs8300-cpufreq-scaling-v2-1-ee41566b8c56@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sda660-ifc6560: Fix dt-validate warning

If you remove clocks property, you should remove clock-names, too.
Fixes warning with dtbs check:

 'clocks' is a dependency of 'clock-names'

Fixes: 34279d6e3f32c ("arm64: dts: qcom: sdm660: Add initial Inforce IFC6560 board support")
Signed-off-by: Alexey Minnekhanov <alexeymin@postmarketos.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250504115120.1432282-4-alexeymin@postmarketos.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>