git.kernel.dk Git - linux-block.git/log

Merge tag 'xfs-6.13-fixes_2024-12-12' of https://git./linux/kernel/git/djwong/xfs-linux into next-rc

xfs: bug fixes for 6.13 [01/12]

Bug fixes for 6.13.

This has been running on the djcloud for months with no problems. Enjoy!

Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>

xfs: port xfs_ioc_start_commit to multigrain timestamps

Take advantage of the multigrain timestamp APIs to ensure that nobody
can sneak in and write things to a file between starting a file update
operation and committing the results. This should have been part of the
multigrain timestamp merge, but I forgot to fling it at jlayton when he
resubmitted the patchset due to developer bandwidth problems.

Cc: <stable@vger.kernel.org> # v6.13-rc1
Fixes: 4e40eff0b5737c ("fs: add infrastructure for multigrain timestamps")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>

xfs: return from xfs_symlink_verify early on V4 filesystems

V4 symlink blocks didn't have headers, so return early if this is a V4
filesystem.

Cc: <stable@vger.kernel.org> # v5.1
Fixes: 39708c20ab5133 ("xfs: miscellaneous verifier magic value fixups")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>

xfs: fix zero byte checking in the superblock scrubber

The logic to check that the region past the end of the superblock is all
zeroes is wrong -- we don't want to check only the bytes past the end of
the maximally sized ondisk superblock structure as currently defined in
xfs_format.h; we want to check the bytes beyond the end of the ondisk as
defined by the feature bits.

Port the superblock size logic from xfs_repair and then put it to use in
xfs_scrub.

Cc: <stable@vger.kernel.org> # v4.15
Fixes: 21fb4cb1981ef7 ("xfs: scrub the secondary superblocks")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>

xfs: check pre-metadir fields correctly

The checks that were added to the superblock scrubber for metadata
directories aren't quite right -- the old inode pointers are now defined
to be zeroes until someone else reuses them. Also consolidate the new
metadir field checks to one place; they were inexplicably scattered
around.

Cc: <stable@vger.kernel.org> # v6.13-rc1
Fixes: 28d756d4d562dc ("xfs: update sb field checks when metadir is turned on")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>

xfs: don't crash on corrupt /quotas dirent

If the /quotas dirent points to an inode but the inode isn't loadable
(and hence mkdir returns -EEXIST), don't crash, just bail out.

Cc: <stable@vger.kernel.org> # v6.13-rc1
Fixes: e80fbe1ad8eff7 ("xfs: use metadir for quota inodes")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>

xfs: don't move nondir/nonreg temporary repair files to the metadir namespace

Only directories or regular files are allowed in the metadata directory
tree.  Don't move the repair tempfile to the metadir namespace if this
is not true; this will cause the inode verifiers to trip.

xrep_tempfile_adjust_directory_tree opportunistically moves sc->tempip
from the regular directory tree to the metadata directory tree if sc->ip
is part of the metadata directory tree.  However, the scrub setup
functions grab sc->ip and create sc->tempip before we actually get
around to checking if the file mode is the right type for the scrubber.

IOWs, you can invoke the symlink scrubber with the file handle of a
subdirectory in the metadir.  xrep_setup_symlink will create a temporary
symlink file, xrep_tempfile_adjust_directory_tree will foolishly try to
set the METADATA flag on the temp symlink, which trips the inode
verifier in the inode item precommit, which shuts down the filesystem
when expensive checks are turned on.  If they're /not/ turned on, then
xchk_symlink will return ENOENT when it sees that it's been passed a
symlink, but the invalid inode could still get flushed to disk.  We
don't want that.

Cc: <stable@vger.kernel.org> # v6.13-rc1
Fixes: 9dc31acb01a1c7 ("xfs: move repair temporary files to the metadata directory tree")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>

xfs: fix sb_spino_align checks for large fsblock sizes

For a sparse inodes filesystem, mkfs.xfs computes the values of
sb_spino_align and sb_inoalignmt with the following code:

int     cluster_size = XFS_INODE_BIG_CLUSTER_SIZE;

if (cfg->sb_feat.crcs_enabled)
cluster_size *= cfg->inodesize / XFS_DINODE_MIN_SIZE;

sbp->sb_spino_align = cluster_size >> cfg->blocklog;
sbp->sb_inoalignmt = XFS_INODES_PER_CHUNK *
cfg->inodesize >> cfg->blocklog;

On a V5 filesystem with 64k fsblocks and 512 byte inodes, this results
in cluster_size = 8192 * (512 / 256) = 16384.  As a result,
sb_spino_align and sb_inoalignmt are both set to zero.  Unfortunately,
this trips the new sb_spino_align check that was just added to
xfs_validate_sb_common, and the mkfs fails:

# mkfs.xfs -f -b size=64k, /dev/sda
meta-data=/dev/sda               isize=512    agcount=4, agsize=81136 blks
         =                       sectsz=512   attr=2, projid32bit=1
         =                       crc=1        finobt=1, sparse=1, rmapbt=1
         =                       reflink=1    bigtime=1 inobtcount=1 nrext64=1
         =                       exchange=0   metadir=0
data     =                       bsize=65536  blocks=324544, imaxpct=25
         =                       sunit=0      swidth=0 blks
naming   =version 2              bsize=65536  ascii-ci=0, ftype=1, parent=0
log      =internal log           bsize=65536  blocks=5006, version=2
         =                       sectsz=512   sunit=0 blks, lazy-count=1
realtime =none                   extsz=65536  blocks=0, rtextents=0
         =                       rgcount=0    rgsize=0 extents
Discarding blocks...Sparse inode alignment (0) is invalid.
Metadata corruption detected at 0x560ac5a80bbe, xfs_sb block 0x0/0x200
libxfs_bwrite: write verifier failed on xfs_sb bno 0x0/0x1
mkfs.xfs: Releasing dirty buffer to free list!
found dirty buffer (bulk) on free list!
Sparse inode alignment (0) is invalid.
Metadata corruption detected at 0x560ac5a80bbe, xfs_sb block 0x0/0x200
libxfs_bwrite: write verifier failed on xfs_sb bno 0x0/0x1
mkfs.xfs: writing AG headers failed, err=22

Prior to commit 59e43f5479cce1 this all worked fine, even if "sparse"
inodes are somewhat meaningless when everything fits in a single
fsblock.  Adjust the checks to handle existing filesystems.

Cc: <stable@vger.kernel.org> # v6.13-rc1
Fixes: 59e43f5479cce1 ("xfs: sb_spino_align is not verified")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>

xfs: convert quotacheck to attach dquot buffers

Now that we've converted the dquot logging machinery to attach the dquot
buffer to the li_buf pointer so that the AIL dqflush doesn't have to
allocate or read buffers in a reclaim path, do the same for the
quotacheck code so that the reclaim shrinker dqflush call doesn't have
to do that either.

Cc: <stable@vger.kernel.org> # v6.12
Fixes: 903edea6c53f09 ("mm: warn about illegal __GFP_NOFAIL usage in a more appropriate location and manner")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>

xfs: attach dquot buffer to dquot log item buffer

Ever since 6.12-rc1, I've observed a pile of warnings from the kernel
when running fstests with quotas enabled:

WARNING: CPU: 1 PID: 458580 at mm/page_alloc.c:4221 __alloc_pages_noprof+0xc9c/0xf18
CPU: 1 UID: 0 PID: 458580 Comm: xfsaild/sda3 Tainted: G        W          6.12.0-rc6-djwa #rc6 6ee3e0e531f6457e2d26aa008a3b65ff184b377c
<snip>
Call trace:
__alloc_pages_noprof+0xc9c/0xf18
alloc_pages_mpol_noprof+0x94/0x240
alloc_pages_noprof+0x68/0xf8
new_slab+0x3e0/0x568
___slab_alloc+0x5a0/0xb88
__slab_alloc.constprop.0+0x7c/0xf8
__kmalloc_noprof+0x404/0x4d0
xfs_buf_get_map+0x594/0xde0 [xfs 384cb02810558b4c490343c164e9407332118f88]
xfs_buf_read_map+0x64/0x2e0 [xfs 384cb02810558b4c490343c164e9407332118f88]
xfs_trans_read_buf_map+0x1dc/0x518 [xfs 384cb02810558b4c490343c164e9407332118f88]
xfs_qm_dqflush+0xac/0x468 [xfs 384cb02810558b4c490343c164e9407332118f88]
xfs_qm_dquot_logitem_push+0xe4/0x148 [xfs 384cb02810558b4c490343c164e9407332118f88]
xfsaild+0x3f4/0xde8 [xfs 384cb02810558b4c490343c164e9407332118f88]
kthread+0x110/0x128
ret_from_fork+0x10/0x20
---[ end trace 0000000000000000 ]---

This corresponds to the line:

WARN_ON_ONCE(current->flags & PF_MEMALLOC);

within the NOFAIL checks.  What's happening here is that the XFS AIL is
trying to write a disk quota update back into the filesystem, but for
that it needs to read the ondisk buffer for the dquot.  The buffer is
not in memory anymore, probably because it was evicted.  Regardless, the
buffer cache tries to allocate a new buffer, but those allocations are
NOFAIL.  The AIL thread has marked itself PF_MEMALLOC (aka noreclaim)
since commit 43ff2122e6492b ("xfs: on-stack delayed write buffer lists")
presumably because reclaim can push on XFS to push on the AIL.

An easy way to fix this probably would have been to drop the NOFAIL flag
from the xfs_buf allocation and open code a retry loop, but then there's
still the problem that for bs>ps filesystems, the buffer itself could
require up to 64k worth of pages.

Inode items had similar behavior (multi-page cluster buffers that we
don't want to allocate in the AIL) which we solved by making transaction
precommit attach the inode cluster buffers to the dirty log item.  Let's
solve the dquot problem in the same way.

So: Make a real precommit handler to read the dquot buffer and attach it
to the log item; pass it to dqflush in the push method; and have the
iodone function detach the buffer once we've flushed everything.  Add a
state flag to the log item to track when a thread has entered the
precommit -> push mechanism to skip the detaching if it turns out that
the dquot is very busy, as we don't hold the dquot lock between log item
commit and AIL push).

Reading and attaching the dquot buffer in the precommit hook is inspired
by the work done for inode cluster buffers some time ago.

Cc: <stable@vger.kernel.org> # v6.12
Fixes: 903edea6c53f09 ("mm: warn about illegal __GFP_NOFAIL usage in a more appropriate location and manner")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>

xfs: clean up log item accesses in xfs_qm_dqflush{,_done}

Clean up these functions a little bit before we move on to the real
modifications, and make the variable naming consistent for dquot log
items.

Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>

xfs: separate dquot buffer reads from xfs_dqflush

The first step towards holding the dquot buffer in the li_buf instead of
reading it in the AIL is to separate the part that reads the buffer from
the actual flush code. There should be no functional changes.

Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>

xfs: don't lose solo dquot update transactions

Quota counter updates are tracked via incore objects which hang off the
xfs_trans object.  These changes are then turned into dirty log items in
xfs_trans_apply_dquot_deltas just prior to commiting the log items to
the CIL.

However, updating the incore deltas do not cause XFS_TRANS_DIRTY to be
set on the transaction.  In other words, a pure quota counter update
will be silently discarded if there are no other dirty log items
attached to the transaction.

This is currently not the case anywhere in the filesystem because quota
updates always dirty at least one other metadata item, but a subsequent
bug fix will add dquot log item precommits, so we actually need a dirty
dquot log item prior to xfs_trans_run_precommits.  Also let's not leave
a logic bomb.

Cc: <stable@vger.kernel.org> # v2.6.35
Fixes: 0924378a689ccb ("xfs: split out iclog writing from xfs_trans_commit()")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>

xfs: don't lose solo superblock counter update transactions

Superblock counter updates are tracked via per-transaction counters in
the xfs_trans object. These changes are then turned into dirty log
items in xfs_trans_apply_sb_deltas just prior to commiting the log items
to the CIL.

However, updating the per-transaction counter deltas do not cause
XFS_TRANS_DIRTY to be set on the transaction. In other words, a pure sb
counter update will be silently discarded if there are no other dirty
log items attached to the transaction.

This is currently not the case anywhere in the filesystem because sb
counter updates always dirty at least one other metadata item, but let's
not leave a logic bomb.

Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>

xfs: avoid nested calls to __xfs_trans_commit

Currently, __xfs_trans_commit calls xfs_defer_finish_noroll, which calls
__xfs_trans_commit again on the same transaction. In other words,
there's a nested function call (albeit with slightly different
arguments) that has caused minor amounts of confusion in the past.
There's no reason to keep this around, since there's only one place
where we actually want the xfs_defer_finish_noroll, and that is in the
top level xfs_trans_commit call.

This also reduces stack usage a little bit.

Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>

xfs: only run precommits once per transaction object

Committing a transaction tx0 with a defer ops chain of (A, B, C)
creates a chain of transactions that looks like this:

tx0 -> txA -> txB -> txC

Prior to commit cb042117488dbf, __xfs_trans_commit would run precommits
on tx0, then call xfs_defer_finish_noroll to convert A-C to tx[A-C].
Unfortunately, after the finish_noroll loop we forgot to run precommits
on txC.  That was fixed by adding the second precommit call.

Unfortunately, none of us remembered that xfs_defer_finish_noroll
calls __xfs_trans_commit a second time to commit tx0 before finishing
work A in txA and committing that.  In other words, we run precommits
twice on tx0:

xfs_trans_commit(tx0)
    __xfs_trans_commit(tx0, false)
        xfs_trans_run_precommits(tx0)
        xfs_defer_finish_noroll(tx0)
            xfs_trans_roll(tx0)
                txA = xfs_trans_dup(tx0)
                __xfs_trans_commit(tx0, true)
                xfs_trans_run_precommits(tx0)

This currently isn't an issue because the inode item precommit is
idempotent; the iunlink item precommit deletes itself so it can't be
called again; and the buffer/dquot item precommits only check the incore
objects for corruption.  However, it doesn't make sense to run
precommits twice.

Fix this situation by only running precommits after finish_noroll.

Cc: <stable@vger.kernel.org> # v6.4
Fixes: cb042117488dbf ("xfs: defered work could create precommits")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>

xfs: unlock inodes when erroring out of xfs_trans_alloc_dir

Debugging a filesystem patch with generic/475 caused the system to hang
after observing the following sequences in dmesg:

XFS (dm-0): metadata I/O error in "xfs_imap_to_bp+0x61/0xe0 [xfs]" at daddr 0x491520 len 32 error 5
XFS (dm-0): metadata I/O error in "xfs_btree_read_buf_block+0xba/0x160 [xfs]" at daddr 0x3445608 len 8 error 5
XFS (dm-0): metadata I/O error in "xfs_imap_to_bp+0x61/0xe0 [xfs]" at daddr 0x138e1c0 len 32 error 5
XFS (dm-0): log I/O error -5
XFS (dm-0): Metadata I/O Error (0x1) detected at xfs_trans_read_buf_map+0x1ea/0x4b0 [xfs] (fs/xfs/xfs_trans_buf.c:311).  Shutting down filesystem.
XFS (dm-0): Please unmount the filesystem and rectify the problem(s)
XFS (dm-0): Internal error dqp->q_ino.reserved < dqp->q_ino.count at line 869 of file fs/xfs/xfs_trans_dquot.c.  Caller xfs_trans_dqresv+0x236/0x440 [xfs]
XFS (dm-0): Corruption detected. Unmount and run xfs_repair
XFS (dm-0): Unmounting Filesystem be6bcbcc-9921-4deb-8d16-7cc94e335fa7

The system is stuck in unmount trying to lock a couple of inodes so that
they can be purged.  The dquot corruption notice above is a clue to what
happened -- a link() call tried to set up a transaction to link a child
into a directory.  Quota reservation for the transaction failed after IO
errors shut down the filesystem, but then we forgot to unlock the inodes
on our way out.  Fix that.

Cc: <stable@vger.kernel.org> # v6.10
Fixes: bd5562111d5839 ("xfs: Hold inode locks in xfs_trans_alloc_dir")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>

xfs: fix scrub tracepoints when inode-rooted btrees are involved

Fix a minor mistakes in the scrub tracepoints that can manifest when
inode-rooted btrees are enabled. The existing code worked fine for bmap
btrees, but we should tighten the code up to be less sloppy.

Cc: <stable@vger.kernel.org> # v5.7
Fixes: 92219c292af8dd ("xfs: convert btree cursor inode-private member names")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>

xfs: update btree keys correctly when _insrec splits an inode root block

In commit 2c813ad66a72, I partially fixed a bug wherein xfs_btree_insrec
would erroneously try to update the parent's key for a block that had
been split if we decided to insert the new record into the new block.
The solution was to detect this situation and update the in-core key
value that we pass up to the caller so that the caller will (eventually)
add the new block to the parent level of the tree with the correct key.

However, I missed a subtlety about the way inode-rooted btrees work.  If
the full block was a maximally sized inode root block, we'll solve that
fullness by moving the root block's records to a new block, resizing the
root block, and updating the root to point to the new block.  We don't
pass a pointer to the new block to the caller because that work has
already been done.  The new record will /always/ land in the new block,
so in this case we need to use xfs_btree_update_keys to update the keys.

This bug can theoretically manifest itself in the very rare case that we
split a bmbt root block and the new record lands in the very first slot
of the new block, though I've never managed to trigger it in practice.
However, it is very easy to reproduce by running generic/522 with the
realtime rmapbt patchset if rtinherit=1.

Cc: <stable@vger.kernel.org> # v4.8
Fixes: 2c813ad66a7218 ("xfs: support btrees with overlapping intervals for keys")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>

xfs: fix error bailout in xfs_rtginode_create

smatch reported that we screwed up the error cleanup in this function.
Fix it.

Cc: <stable@vger.kernel.org> # v6.13-rc1
Fixes: ae897e0bed0f54 ("xfs: support creating per-RTG files in growfs")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>

xfs: fix null bno_hint handling in xfs_rtallocate_rtg

xfs_bmap_rtalloc initializes the bno_hint variable to NULLRTBLOCK (aka
NULLFSBLOCK).  If the allocation request is for a file range that's
adjacent to an existing mapping, it will then change bno_hint to the
blkno hint in the bmalloca structure.

In other words, bno_hint is either a rt block number, or it's all 1s.
Unfortunately, commit ec12f97f1b8a8f didn't take the NULLRTBLOCK state
into account, which means that it tries to translate that into a
realtime extent number.  We then end up with an obnoxiously high rtx
number and pointlessly feed that to the near allocator.  This often
fails and falls back to the by-size allocator.  Seeing as we had no
locality hint anyway, this is a waste of time.

Fix the code to detect a lack of bno_hint correctly.  This was detected
by running xfs/009 with metadir enabled and a 28k rt extent size.

Cc: <stable@vger.kernel.org> # v6.12
Fixes: ec12f97f1b8a8f ("xfs: make the rtalloc start hint a xfs_rtblock_t")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>

xfs: mark metadir repair tempfiles with IRECOVERY

Once in a long while, xfs/566 and xfs/801 report directory corruption in
one of the metadata subdirectories while it's forcibly rebuilding all
filesystem metadata.  I observed the following sequence of events:

1. Initiate a repair of the parent pointers for the /quota/user file.
   This is the secret file containing user quota data.

2. The pptr repair thread creates a temporary file and begins staging
   parent pointers in the ondisk metadata in preparation for an
   exchange-range to commit the new pptr data.

3. At the same time, initiate a repair of the /quota directory itself.

4. The dir repair thread finds the temporary file from (2), scans it for
   parent pointers, and stages a dirent in its own temporary dir in
   preparation to commit the fixed directory.

5. The parent pointer repair completes and frees the temporary file.

6. The dir repair commits the new directory and scans it again.  It
   finds the dirent that points to the old temporary file in (2) and
   marks the directory corrupt.

Oops!  Repair code must never scan the temporary files that other repair
functions create to stage new metadata.  They're not supposed to do
that, but the predicate function xrep_is_tempfile is incorrect because
it assumes that any XFS_DIFLAG2_METADATA file cannot ever be a temporary
file, but xrep_tempfile_adjust_directory_tree creates exactly that.

Fix this by setting the IRECOVERY flag on temporary metadata directory
inodes and using that to correct the predicate.  Repair code is supposed
to erase all the data in temporary files before releasing them, so it's
ok if a thread scans the temporary file after we drop IRECOVERY.

Cc: <stable@vger.kernel.org> # v6.13-rc1
Fixes: bb6cdd5529ff67 ("xfs: hide metadata inodes from everyone because they are special")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>

xfs: set XFS_SICK_INO_SYMLINK_ZAPPED explicitly when zapping a symlink

If we need to reset a symlink target to the "durr it's busted" string,
then we clear the zapped flag as well. However, this should be using
the provided helper so that we don't set the zapped state on an
otherwise ok symlink.

Cc: <stable@vger.kernel.org> # v6.10
Fixes: 2651923d8d8db0 ("xfs: online repair of symbolic links")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>

xfs: separate healthy clearing mask during repair

In commit d9041681dd2f53 we introduced some XFS_SICK_*ZAPPED flags so
that the inode record repair code could clean up a damaged inode record
enough to iget the inode but still be able to remember that the higher
level repair code needs to be called.  As part of that, we introduced a
xchk_mark_healthy_if_clean helper that is supposed to cause the ZAPPED
state to be removed if that higher level metadata actually checks out.
This was done by setting additional bits in sick_mask hoping that
xchk_update_health will clear all those bits after a healthy scrub.

Unfortunately, that's not quite what sick_mask means -- bits in that
mask are indeed cleared if the metadata is healthy, but they're set if
the metadata is NOT healthy.  fsck is only intended to set the ZAPPED
bits explicitly.

If something else sets the CORRUPT/XCORRUPT state after the
xchk_mark_healthy_if_clean call, we end up marking the metadata zapped.
This can happen if the following sequence happens:

1. Scrub runs, discovers that the metadata is fine but could be
   optimized and calls xchk_mark_healthy_if_clean on a ZAPPED flag.
   That causes the ZAPPED flag to be set in sick_mask because the
   metadata is not CORRUPT or XCORRUPT.

2. Repair runs to optimize the metadata.

3. Some other metadata used for cross-referencing in (1) becomes
   corrupt.

4. Post-repair scrub runs, but this time it sets CORRUPT or XCORRUPT due
   to the events in (3).

5. Now the xchk_health_update sets the ZAPPED flag on the metadata we
   just repaired.  This is not the correct state.

Fix this by moving the "if healthy" mask to a separate field, and only
ever using it to clear the sick state.

Cc: <stable@vger.kernel.org> # v6.8
Fixes: d9041681dd2f53 ("xfs: set inode sick state flags when we zap either ondisk fork")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>

xfs: don't drop errno values when we fail to ficlone the entire range

Way back when we first implemented FICLONE for XFS, life was simple --
either the the entire remapping completed, or something happened and we
had to return an errno explaining what happened.  Neither of those
ioctls support returning partial results, so it's all or nothing.

Then things got complicated when copy_file_range came along, because it
actually can return the number of bytes copied, so commit 3f68c1f562f1e4
tried to make it so that we could return a partial result if the
REMAP_FILE_CAN_SHORTEN flag is set.  This is also how FIDEDUPERANGE can
indicate that the kernel performed a partial deduplication.

Unfortunately, the logic is wrong if an error stops the remapping and
CAN_SHORTEN is not set.  Because those callers cannot return partial
results, it is an error for ->remap_file_range to return a positive
quantity that is less than the @len passed in.  Implementations really
should be returning a negative errno in this case, because that's what
btrfs (which introduced FICLONE{,RANGE}) did.

Therefore, ->remap_range implementations cannot silently drop an errno
that they might have when the number of bytes remapped is less than the
number of bytes requested and CAN_SHORTEN is not set.

Found by running generic/562 on a 64k fsblock filesystem and wondering
why it reported corrupt files.

Cc: <stable@vger.kernel.org> # v4.20
Fixes: 3fc9f5e409319e ("xfs: remove xfs_reflink_remap_range")
Really-Fixes: 3f68c1f562f1e4 ("xfs: support returning partial reflink results")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>

xfs: return a 64-bit block count from xfs_btree_count_blocks

With the nrext64 feature enabled, it's possible for a data fork to have
2^48 extent mappings. Even with a 64k fsblock size, that maps out to
a bmbt containing more than 2^32 blocks. Therefore, this predicate must
return a u64 count to avoid an integer wraparound that will cause scrub
to do the wrong thing.

It's unlikely that any such filesystem currently exists, because the
incore bmbt would consume more than 64GB of kernel memory on its own,
and so far nobody except me has driven a filesystem that far, judging
from the lack of complaints.

Cc: <stable@vger.kernel.org> # v5.19
Fixes: df9ad5cc7a5240 ("xfs: Introduce macros to represent new maximum extent counts for data/attr forks")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>

xfs: keep quota directory inode loaded

In the same vein as the previous patch, there's no point in the metapath
scrub setup function doing a lookup on the quota metadir just so it can
validate that lookups work correctly. Instead, retain the quota
directory inode in memory for the lifetime of the mount so that we can
check this meaningfully.

Cc: <stable@vger.kernel.org> # v6.13-rc1
Fixes: 128a055291ebbc ("xfs: scrub quota file metapaths")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>

xfs: metapath scrubber should use the already loaded inodes

Don't waste time in xchk_setup_metapath_dqinode doing a second lookup of
the quota inodes, just grab them from the quotainfo structure. The
whole point of this scrubber is to make sure that the dirents exist, so
it's completely silly to do lookups.

Cc: <stable@vger.kernel.org> # v6.13-rc1
Fixes: 128a055291ebbc ("xfs: scrub quota file metapaths")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>

xfs: fix off-by-one error in fsmap's end_daddr usage

In commit ca6448aed4f10a, we created an "end_daddr" variable to fix
fsmap reporting when the end of the range requested falls in the middle
of an unknown (aka free on the rmapbt) region. Unfortunately, I didn't
notice that the the code sets end_daddr to the last sector of the device
but then uses that quantity to compute the length of the synthesized
mapping.

Zizhi Wo later observed that when end_daddr isn't set, we still don't
report the last fsblock on a device because in that case (aka when
info->last is true), the info->high mapping that we pass to
xfs_getfsmap_group_helper has a startblock that points to the last
fsblock. This is also wrong because the code uses startblock to
compute the length of the synthesized mapping.

Fix the second problem by setting end_daddr unconditionally, and fix the
first problem by setting start_daddr to one past the end of the range to
query.

Cc: <stable@vger.kernel.org> # v6.11
Fixes: ca6448aed4f10a ("xfs: Fix missing interval for missing_owner in xfs fsmap")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reported-by: Zizhi Wo <wozizhi@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>

Merge tag 'v6.13-rc2-ksmbd-server-fixes' of git://git.samba.org/ksmbd

Pull smb server fixes from Steve French:

- fix ctime setting in setattr

- fix reference count on user session to avoid potential race with
   session expire

- fix query dir issue

* tag 'v6.13-rc2-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
  ksmbd: set ATTR_CTIME flags when setting mtime
  ksmbd: fix racy issue from session lookup and expire
  ksmbd: retry iterate_dir in smb2_query_dir

Merge tag 'perf-tools-fixes-for-v6.13-2024-12-12' of git://git./linux/kernel/git/perf/perf-tools

Pull perf tools fixes from Namhyung Kim:
"A set of random fixes for this cycle.

  perf record:
   - Fix build-id event size calculation in perf record
   - Fix perf record -C/--cpu option on hybrid systems
   - Fix perf mem record with precise-ip on SapphireRapids

  perf test:
   - Refresh hwmon directory before reading the test files
   - Make sure system_tsc_freq event is tested on x86 only

  Others:
   - Usual header file sync
   - Fix undefined behavior in perf ftrace profile
   - Properly initialize a return variable in perf probe"

* tag 'perf-tools-fixes-for-v6.13-2024-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (21 commits)
  perf probe: Fix uninitialized variable
  libperf: evlist: Fix --cpu argument on hybrid platform
  perf test expr: Fix system_tsc_freq for only x86
  perf test hwmon_pmu: Fix event file location
  perf hwmon_pmu: Use openat rather than dup to refresh directory
  perf ftrace: Fix undefined behavior in cmp_profile_data()
  perf tools: Fix precise_ip fallback logic
  perf tools: Fix build error on generated/fs_at_flags_array.c
  tools headers: Sync uapi/linux/prctl.h with the kernel sources
  tools headers: Sync uapi/linux/mount.h with the kernel sources
  tools headers: Sync uapi/linux/fcntl.h with the kernel sources
  tools headers: Sync uapi/asm-generic/mman.h with the kernel sources
  tools headers: Sync *xattrat syscall changes with the kernel sources
  tools headers: Sync arm64 kvm header with the kernel sources
  tools headers: Sync x86 kvm and cpufeature headers with the kernel
  tools headers: Sync uapi/linux/kvm.h with the kernel sources
  tools headers: Sync uapi/linux/perf_event.h with the kernel sources
  tools headers: Sync uapi/drm/drm.h with the kernel sources
  perf machine: Initialize machine->env to address a segfault
  perf test: Don't signal all processes on system when interrupting tests
  ...

Merge tag 'for-linus' of https://github.com/openrisc/linux

Pull OpenRISC fixes from Stafford Horne:

- Fix from Masahiro Yamada to fix 6.13 OpenRISC boot issues after
   vmlinux.lds.h symbol ordering was changed

- Code formatting fixups from Geert

* tag 'for-linus' of https://github.com/openrisc/linux:
  openrisc: Fix misalignments in head.S
  openrisc: place exception table at the head of vmlinux

Merge tag 'net-6.13-rc3' of git://git./linux/kernel/git/netdev/net

Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth, netfilter and wireless.

  Current release - fix to a fix:

   - rtnetlink: fix error code in rtnl_newlink()

   - tipc: fix NULL deref in cleanup_bearer()

  Current release - regressions:

   - ip: fix warning about invalid return from in ip_route_input_rcu()

  Current release - new code bugs:

   - udp: fix L4 hash after reconnect

   - eth: lan969x: fix cyclic dependency between modules

   - eth: bnxt_en: fix potential crash when dumping FW log coredump

  Previous releases - regressions:

   - wifi: mac80211:
      - fix a queue stall in certain cases of channel switch
      - wake the queues in case of failure in resume

   - splice: do not checksum AF_UNIX sockets

   - virtio_net: fix BUG()s in BQL support due to incorrect accounting
     of purged packets during interface stop

   - eth:
      - stmmac: fix TSO DMA API mis-usage causing oops
      - bnxt_en: fixes for HW GRO: GSO type on 5750X chips and oops
        due to incorrect aggregation ID mask on 5760X chips

  Previous releases - always broken:

   - Bluetooth: improve setsockopt() handling of malformed user input

   - eth: ocelot: fix PTP timestamping in presence of packet loss

   - ptp: kvm: x86: avoid "fail to initialize ptp_kvm" when simply not
     supported"

* tag 'net-6.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (81 commits)
  net: dsa: tag_ocelot_8021q: fix broken reception
  net: dsa: microchip: KSZ9896 register regmap alignment to 32 bit boundaries
  net: renesas: rswitch: fix initial MPIC register setting
  Bluetooth: btmtk: avoid UAF in btmtk_process_coredump
  Bluetooth: iso: Fix circular lock in iso_conn_big_sync
  Bluetooth: iso: Fix circular lock in iso_listen_bis
  Bluetooth: SCO: Add support for 16 bits transparent voice setting
  Bluetooth: iso: Fix recursive locking warning
  Bluetooth: iso: Always release hdev at the end of iso_listen_bis
  Bluetooth: hci_event: Fix using rcu_read_(un)lock while iterating
  Bluetooth: hci_core: Fix sleeping function called from invalid context
  team: Fix feature propagation of NETIF_F_GSO_ENCAP_ALL
  team: Fix initial vlan_feature set in __team_compute_features
  bonding: Fix feature propagation of NETIF_F_GSO_ENCAP_ALL
  bonding: Fix initial {vlan,mpls}_feature set in bond_compute_features
  net, team, bonding: Add netdev_base_features helper
  net/sched: netem: account for backlog updates from child qdisc
  net: dsa: felix: fix stuck CPU-injected packets with short taprio windows
  splice: do not checksum AF_UNIX sockets
  net: usb: qmi_wwan: add Telit FE910C04 compositions
  ...

Merge tag 'for-net-2024-12-12' of git://git./linux/kernel/git/bluetooth/bluetooth

Luiz Augusto von Dentz says:

====================
bluetooth pull request for net:

- SCO: Fix transparent voice setting
- ISO: Locking fixes
- hci_core: Fix sleeping function called from invalid context
- hci_event: Fix using rcu_read_(un)lock while iterating
- btmtk: avoid UAF in btmtk_process_coredump

* tag 'for-net-2024-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
  Bluetooth: btmtk: avoid UAF in btmtk_process_coredump
  Bluetooth: iso: Fix circular lock in iso_conn_big_sync
  Bluetooth: iso: Fix circular lock in iso_listen_bis
  Bluetooth: SCO: Add support for 16 bits transparent voice setting
  Bluetooth: iso: Fix recursive locking warning
  Bluetooth: iso: Always release hdev at the end of iso_listen_bis
  Bluetooth: hci_event: Fix using rcu_read_(un)lock while iterating
  Bluetooth: hci_core: Fix sleeping function called from invalid context
  Bluetooth: Improve setsockopt() handling of malformed user input
====================

Link: https://patch.msgid.link/20241212142806.2046274-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: dsa: tag_ocelot_8021q: fix broken reception

The blamed commit changed the dsa_8021q_rcv() calling convention to
accept pre-populated source_port and switch_id arguments. If those are
not available, as in the case of tag_ocelot_8021q, the arguments must be
pre-initialized with -1.

Due to the bug of passing uninitialized arguments in tag_ocelot_8021q,
dsa_8021q_rcv() does not detect that it needs to populate the
source_port and switch_id, and this makes dsa_conduit_find_user() fail,
which leads to packet loss on reception.

Fixes: dcfe7673787b ("net: dsa: tag_sja1105: absorb logic for not overwriting precise info into dsa_8021q_rcv()")
Signed-off-by: Robert Hodaszi <robert.hodaszi@digi.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20241211144741.1415758-1-robert.hodaszi@digi.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: dsa: microchip: KSZ9896 register regmap alignment to 32 bit boundaries

Commit 8d7ae22ae9f8 ("net: dsa: microchip: KSZ9477 register regmap
alignment to 32 bit boundaries") fixed an issue whereby regmap_reg_range
did not allow writes as 32 bit words to KSZ9477 PHY registers, this fix
for KSZ9896 is adapted from there as the same errata is present in
KSZ9896C as "Module 5: Certain PHY registers must be written as pairs
instead of singly" the explanation below is likewise taken from this
commit.

The commit provided code
to apply "Module 6: Certain PHY registers must be written as pairs instead
of singly" errata for KSZ9477 as this chip for certain PHY registers
(0xN120 to 0xN13F, N=1,2,3,4,5) must be accessed as 32 bit words instead
of 16 or 8 bit access.
Otherwise, adjacent registers (no matter if reserved or not) are
overwritten with 0x0.

Without this patch some registers (e.g. 0x113c or 0x1134) required for 32
bit access are out of valid regmap ranges.

As a result, following error is observed and KSZ9896 is not properly
configured:

ksz-switch spi1.0: can't rmw 32bit reg 0x113c: -EIO
ksz-switch spi1.0: can't rmw 32bit reg 0x1134: -EIO
ksz-switch spi1.0 lan1 (uninitialized): failed to connect to PHY: -EIO
ksz-switch spi1.0 lan1 (uninitialized): error -5 setting up PHY for tree 0, switch 0, port 0

The solution is to modify regmap_reg_range to allow accesses with 4 bytes
boundaries.

Fixes: 5c844d57aa78 ("net: dsa: microchip: fix writes to phy registers >= 0x10")
Signed-off-by: Jesse Van Gavere <jesse.vangavere@scioteq.com>
Link: https://patch.msgid.link/20241211092932.26881-1-jesse.vangavere@scioteq.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: renesas: rswitch: fix initial MPIC register setting

MPIC.PIS must be set per phy interface type.
MPIC.LSC must be set per speed.

Do that strictly per datasheet, instead of hardcoding MPIC.PIS to GMII.

Fixes: 3590918b5d07 ("net: ethernet: renesas: Add support for "Ethernet Switch"")
Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/20241211053012.368914-1-nikita.yoush@cogentembedded.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Bluetooth: btmtk: avoid UAF in btmtk_process_coredump

hci_devcd_append may lead to the release of the skb, so it cannot be
accessed once it is called.

==================================================================
BUG: KASAN: slab-use-after-free in btmtk_process_coredump+0x2a7/0x2d0 [btmtk]
Read of size 4 at addr ffff888033cfabb0 by task kworker/0:3/82

CPU: 0 PID: 82 Comm: kworker/0:3 Tainted: G U 6.6.40-lockdep-03464-g1d8b4eb3060e #1 b0b3c1cc0c842735643fb411799d97921d1f688c
Hardware name: Google Yaviks_Ufs/Yaviks_Ufs, BIOS Google_Yaviks_Ufs.15217.552.0 05/07/2024
Workqueue: events btusb_rx_work [btusb]
Call Trace:
<TASK>
dump_stack_lvl+0xfd/0x150
print_report+0x131/0x780
kasan_report+0x177/0x1c0
btmtk_process_coredump+0x2a7/0x2d0 [btmtk 03edd567dd71a65958807c95a65db31d433e1d01]
btusb_recv_acl_mtk+0x11c/0x1a0 [btusb 675430d1e87c4f24d0c1f80efe600757a0f32bec]
btusb_rx_work+0x9e/0xe0 [btusb 675430d1e87c4f24d0c1f80efe600757a0f32bec]
worker_thread+0xe44/0x2cc0
kthread+0x2ff/0x3a0
ret_from_fork+0x51/0x80
ret_from_fork_asm+0x1b/0x30
</TASK>

Allocated by task 82:
stack_trace_save+0xdc/0x190
kasan_set_track+0x4e/0x80
__kasan_slab_alloc+0x4e/0x60
kmem_cache_alloc+0x19f/0x360
skb_clone+0x132/0xf70
btusb_recv_acl_mtk+0x104/0x1a0 [btusb]
btusb_rx_work+0x9e/0xe0 [btusb]
worker_thread+0xe44/0x2cc0
kthread+0x2ff/0x3a0
ret_from_fork+0x51/0x80
ret_from_fork_asm+0x1b/0x30

Freed by task 1733:
stack_trace_save+0xdc/0x190
kasan_set_track+0x4e/0x80
kasan_save_free_info+0x28/0xb0
____kasan_slab_free+0xfd/0x170
kmem_cache_free+0x183/0x3f0
hci_devcd_rx+0x91a/0x2060 [bluetooth]
worker_thread+0xe44/0x2cc0
kthread+0x2ff/0x3a0
ret_from_fork+0x51/0x80
ret_from_fork_asm+0x1b/0x30

The buggy address belongs to the object at ffff888033cfab40
which belongs to the cache skbuff_head_cache of size 232
The buggy address is located 112 bytes inside of
freed 232-byte region [ffff888033cfab40, ffff888033cfac28)

The buggy address belongs to the physical page:
page:00000000a174ba93 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x33cfa
head:00000000a174ba93 order:1 entire_mapcount:0 nr_pages_mapped:0 pincount:0
anon flags: 0x4000000000000840(slab|head|zone=1)
page_type: 0xffffffff()
raw: 4000000000000840 ffff888100848a00 0000000000000000 0000000000000001
raw: 0000000000000000 0000000080190019 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
ffff888033cfaa80: fb fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc
ffff888033cfab00: fc fc fc fc fc fc fc fc fa fb fb fb fb fb fb fb
>ffff888033cfab80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff888033cfac00: fb fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc
ffff888033cfac80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================

Check if we need to call hci_devcd_complete before calling
hci_devcd_append. That requires that we check data->cd_info.cnt >=
MTK_COREDUMP_NUM instead of data->cd_info.cnt > MTK_COREDUMP_NUM, as we
increment data->cd_info.cnt only once the call to hci_devcd_append
succeeds.

Fixes: 0b7015132878 ("Bluetooth: btusb: mediatek: add MediaTek devcoredump support")
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Bluetooth: iso: Fix circular lock in iso_conn_big_sync

This fixes the circular locking dependency warning below, by reworking
iso_sock_recvmsg, to ensure that the socket lock is always released
before calling a function that locks hdev.

[  561.670344] ======================================================
[  561.670346] WARNING: possible circular locking dependency detected
[  561.670349] 6.12.0-rc6+ #26 Not tainted
[  561.670351] ------------------------------------------------------
[  561.670353] iso-tester/3289 is trying to acquire lock:
[  561.670355] ffff88811f600078 (&hdev->lock){+.+.}-{3:3},
               at: iso_conn_big_sync+0x73/0x260 [bluetooth]
[  561.670405]
               but task is already holding lock:
[  561.670407] ffff88815af58258 (sk_lock-AF_BLUETOOTH){+.+.}-{0:0},
               at: iso_sock_recvmsg+0xbf/0x500 [bluetooth]
[  561.670450]
               which lock already depends on the new lock.

[  561.670452]
               the existing dependency chain (in reverse order) is:
[  561.670453]
               -> #2 (sk_lock-AF_BLUETOOTH){+.+.}-{0:0}:
[  561.670458]        lock_acquire+0x7c/0xc0
[  561.670463]        lock_sock_nested+0x3b/0xf0
[  561.670467]        bt_accept_dequeue+0x1a5/0x4d0 [bluetooth]
[  561.670510]        iso_sock_accept+0x271/0x830 [bluetooth]
[  561.670547]        do_accept+0x3dd/0x610
[  561.670550]        __sys_accept4+0xd8/0x170
[  561.670553]        __x64_sys_accept+0x74/0xc0
[  561.670556]        x64_sys_call+0x17d6/0x25f0
[  561.670559]        do_syscall_64+0x87/0x150
[  561.670563]        entry_SYSCALL_64_after_hwframe+0x76/0x7e
[  561.670567]
               -> #1 (sk_lock-AF_BLUETOOTH-BTPROTO_ISO){+.+.}-{0:0}:
[  561.670571]        lock_acquire+0x7c/0xc0
[  561.670574]        lock_sock_nested+0x3b/0xf0
[  561.670577]        iso_sock_listen+0x2de/0xf30 [bluetooth]
[  561.670617]        __sys_listen_socket+0xef/0x130
[  561.670620]        __x64_sys_listen+0xe1/0x190
[  561.670623]        x64_sys_call+0x2517/0x25f0
[  561.670626]        do_syscall_64+0x87/0x150
[  561.670629]        entry_SYSCALL_64_after_hwframe+0x76/0x7e
[  561.670632]
               -> #0 (&hdev->lock){+.+.}-{3:3}:
[  561.670636]        __lock_acquire+0x32ad/0x6ab0
[  561.670639]        lock_acquire.part.0+0x118/0x360
[  561.670642]        lock_acquire+0x7c/0xc0
[  561.670644]        __mutex_lock+0x18d/0x12f0
[  561.670647]        mutex_lock_nested+0x1b/0x30
[  561.670651]        iso_conn_big_sync+0x73/0x260 [bluetooth]
[  561.670687]        iso_sock_recvmsg+0x3e9/0x500 [bluetooth]
[  561.670722]        sock_recvmsg+0x1d5/0x240
[  561.670725]        sock_read_iter+0x27d/0x470
[  561.670727]        vfs_read+0x9a0/0xd30
[  561.670731]        ksys_read+0x1a8/0x250
[  561.670733]        __x64_sys_read+0x72/0xc0
[  561.670736]        x64_sys_call+0x1b12/0x25f0
[  561.670738]        do_syscall_64+0x87/0x150
[  561.670741]        entry_SYSCALL_64_after_hwframe+0x76/0x7e
[  561.670744]
               other info that might help us debug this:

[  561.670745] Chain exists of:
&hdev->lock --> sk_lock-AF_BLUETOOTH-BTPROTO_ISO --> sk_lock-AF_BLUETOOTH

[  561.670751]  Possible unsafe locking scenario:

[  561.670753]        CPU0                    CPU1
[  561.670754]        ----                    ----
[  561.670756]   lock(sk_lock-AF_BLUETOOTH);
[  561.670758]                                lock(sk_lock
                                              AF_BLUETOOTH-BTPROTO_ISO);
[  561.670761]                                lock(sk_lock-AF_BLUETOOTH);
[  561.670764]   lock(&hdev->lock);
[  561.670767]
                *** DEADLOCK ***

Fixes: 07a9342b94a9 ("Bluetooth: ISO: Send BIG Create Sync via hci_sync")
Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Bluetooth: iso: Fix circular lock in iso_listen_bis

This fixes the circular locking dependency warning below, by
releasing the socket lock before enterning iso_listen_bis, to
avoid any potential deadlock with hdev lock.

[   75.307983] ======================================================
[   75.307984] WARNING: possible circular locking dependency detected
[   75.307985] 6.12.0-rc6+ #22 Not tainted
[   75.307987] ------------------------------------------------------
[   75.307987] kworker/u81:2/2623 is trying to acquire lock:
[   75.307988] ffff8fde1769da58 (sk_lock-AF_BLUETOOTH-BTPROTO_ISO)
               at: iso_connect_cfm+0x253/0x840 [bluetooth]
[   75.308021]
               but task is already holding lock:
[   75.308022] ffff8fdd61a10078 (&hdev->lock)
               at: hci_le_per_adv_report_evt+0x47/0x2f0 [bluetooth]
[   75.308053]
               which lock already depends on the new lock.

[   75.308054]
               the existing dependency chain (in reverse order) is:
[   75.308055]
               -> #1 (&hdev->lock){+.+.}-{3:3}:
[   75.308057]        __mutex_lock+0xad/0xc50
[   75.308061]        mutex_lock_nested+0x1b/0x30
[   75.308063]        iso_sock_listen+0x143/0x5c0 [bluetooth]
[   75.308085]        __sys_listen_socket+0x49/0x60
[   75.308088]        __x64_sys_listen+0x4c/0x90
[   75.308090]        x64_sys_call+0x2517/0x25f0
[   75.308092]        do_syscall_64+0x87/0x150
[   75.308095]        entry_SYSCALL_64_after_hwframe+0x76/0x7e
[   75.308098]
               -> #0 (sk_lock-AF_BLUETOOTH-BTPROTO_ISO){+.+.}-{0:0}:
[   75.308100]        __lock_acquire+0x155e/0x25f0
[   75.308103]        lock_acquire+0xc9/0x300
[   75.308105]        lock_sock_nested+0x32/0x90
[   75.308107]        iso_connect_cfm+0x253/0x840 [bluetooth]
[   75.308128]        hci_connect_cfm+0x6c/0x190 [bluetooth]
[   75.308155]        hci_le_per_adv_report_evt+0x27b/0x2f0 [bluetooth]
[   75.308180]        hci_le_meta_evt+0xe7/0x200 [bluetooth]
[   75.308206]        hci_event_packet+0x21f/0x5c0 [bluetooth]
[   75.308230]        hci_rx_work+0x3ae/0xb10 [bluetooth]
[   75.308254]        process_one_work+0x212/0x740
[   75.308256]        worker_thread+0x1bd/0x3a0
[   75.308258]        kthread+0xe4/0x120
[   75.308259]        ret_from_fork+0x44/0x70
[   75.308261]        ret_from_fork_asm+0x1a/0x30
[   75.308263]
               other info that might help us debug this:

[   75.308264]  Possible unsafe locking scenario:

[   75.308264]        CPU0                CPU1
[   75.308265]        ----                ----
[   75.308265]   lock(&hdev->lock);
[   75.308267]                            lock(sk_lock-
                                                AF_BLUETOOTH-BTPROTO_ISO);
[   75.308268]                            lock(&hdev->lock);
[   75.308269]   lock(sk_lock-AF_BLUETOOTH-BTPROTO_ISO);
[   75.308270]
                *** DEADLOCK ***

[   75.308271] 4 locks held by kworker/u81:2/2623:
[   75.308272]  #0: ffff8fdd66e52148 ((wq_completion)hci0#2){+.+.}-{0:0},
                at: process_one_work+0x443/0x740
[   75.308276]  #1: ffffafb488b7fe48 ((work_completion)(&hdev->rx_work)),
                at: process_one_work+0x1ce/0x740
[   75.308280]  #2: ffff8fdd61a10078 (&hdev->lock){+.+.}-{3:3}
                at: hci_le_per_adv_report_evt+0x47/0x2f0 [bluetooth]
[   75.308304]  #3: ffffffffb6ba4900 (rcu_read_lock){....}-{1:2},
                at: hci_connect_cfm+0x29/0x190 [bluetooth]

Fixes: 02171da6e86a ("Bluetooth: ISO: Add hcon for listening bis sk")
Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Bluetooth: SCO: Add support for 16 bits transparent voice setting

The voice setting is used by sco_connect() or sco_conn_defer_accept()
after being set by sco_sock_setsockopt().

The PCM part of the voice setting is used for offload mode through PCM
chipset port.
This commits add support for mSBC 16 bits offloading, i.e. audio data
not transported over HCI.

The BCM4349B1 supports 16 bits transparent data on its I2S port.
If BT_VOICE_TRANSPARENT is used when accepting a SCO connection, this
gives only garbage audio while using BT_VOICE_TRANSPARENT_16BIT gives
correct audio.
This has been tested with connection to iPhone 14 and Samsung S24.

Fixes: ad10b1a48754 ("Bluetooth: Add Bluetooth socket voice option")
Signed-off-by: Frédéric Danis <frederic.danis@collabora.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Bluetooth: iso: Fix recursive locking warning

This updates iso_sock_accept to use nested locking for the parent
socket, to avoid lockdep warnings caused because the parent and
child sockets are locked by the same thread:

[   41.585683] ============================================
[   41.585688] WARNING: possible recursive locking detected
[   41.585694] 6.12.0-rc6+ #22 Not tainted
[   41.585701] --------------------------------------------
[   41.585705] iso-tester/3139 is trying to acquire lock:
[   41.585711] ffff988b29530a58 (sk_lock-AF_BLUETOOTH)
               at: bt_accept_dequeue+0xe3/0x280 [bluetooth]
[   41.585905]
               but task is already holding lock:
[   41.585909] ffff988b29533a58 (sk_lock-AF_BLUETOOTH)
               at: iso_sock_accept+0x61/0x2d0 [bluetooth]
[   41.586064]
               other info that might help us debug this:
[   41.586069]  Possible unsafe locking scenario:

[   41.586072]        CPU0
[   41.586076]        ----
[   41.586079]   lock(sk_lock-AF_BLUETOOTH);
[   41.586086]   lock(sk_lock-AF_BLUETOOTH);
[   41.586093]
                *** DEADLOCK ***

[   41.586097]  May be due to missing lock nesting notation

[   41.586101] 1 lock held by iso-tester/3139:
[   41.586107]  #0: ffff988b29533a58 (sk_lock-AF_BLUETOOTH)
                at: iso_sock_accept+0x61/0x2d0 [bluetooth]

Fixes: ccf74f2390d6 ("Bluetooth: Add BTPROTO_ISO socket type")
Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Bluetooth: iso: Always release hdev at the end of iso_listen_bis

Since hci_get_route holds the device before returning, the hdev
should be released with hci_dev_put at the end of iso_listen_bis
even if the function returns with an error.

Fixes: 02171da6e86a ("Bluetooth: ISO: Add hcon for listening bis sk")
Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Bluetooth: hci_event: Fix using rcu_read_(un)lock while iterating

The usage of rcu_read_(un)lock while inside list_for_each_entry_rcu is
not safe since for the most part entries fetched this way shall be
treated as rcu_dereference:

Note that the value returned by rcu_dereference() is valid
only within the enclosing RCU read-side critical section [1]_.
For example, the following is **not** legal::

rcu_read_lock();
p = rcu_dereference(head.next);
rcu_read_unlock();
x = p->address; /* BUG!!! */
rcu_read_lock();
y = p->data; /* BUG!!! */
rcu_read_unlock();

Fixes: a0bfde167b50 ("Bluetooth: ISO: Add support for connecting multiple BISes")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Bluetooth: hci_core: Fix sleeping function called from invalid context

This reworks hci_cb_list to not use mutex hci_cb_list_lock to avoid bugs
like the bellow:

BUG: sleeping function called from invalid context at kernel/locking/mutex.c:585
in_atomic(): 0, irqs_disabled(): 0, non_block: 0, pid: 5070, name: kworker/u9:2
preempt_count: 0, expected: 0
RCU nest depth: 1, expected: 0
4 locks held by kworker/u9:2/5070:
#0: ffff888015be3948 ((wq_completion)hci0#2){+.+.}-{0:0}, at: process_one_work kernel/workqueue.c:3229 [inline]
#0: ffff888015be3948 ((wq_completion)hci0#2){+.+.}-{0:0}, at: process_scheduled_works+0x8e0/0x1770 kernel/workqueue.c:3335
#1: ffffc90003b6fd00 ((work_completion)(&hdev->rx_work)){+.+.}-{0:0}, at: process_one_work kernel/workqueue.c:3230 [inline]
#1: ffffc90003b6fd00 ((work_completion)(&hdev->rx_work)){+.+.}-{0:0}, at: process_scheduled_works+0x91b/0x1770 kernel/workqueue.c:3335
#2: ffff8880665d0078 (&hdev->lock){+.+.}-{3:3}, at: hci_le_create_big_complete_evt+0xcf/0xae0 net/bluetooth/hci_event.c:6914
#3: ffffffff8e132020 (rcu_read_lock){....}-{1:2}, at: rcu_lock_acquire include/linux/rcupdate.h:298 [inline]
#3: ffffffff8e132020 (rcu_read_lock){....}-{1:2}, at: rcu_read_lock include/linux/rcupdate.h:750 [inline]
#3: ffffffff8e132020 (rcu_read_lock){....}-{1:2}, at: hci_le_create_big_complete_evt+0xdb/0xae0 net/bluetooth/hci_event.c:6915
CPU: 0 PID: 5070 Comm: kworker/u9:2 Not tainted 6.8.0-syzkaller-08073-g480e035fc4c7 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024
Workqueue: hci0 hci_rx_work
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:114
__might_resched+0x5d4/0x780 kernel/sched/core.c:10187
__mutex_lock_common kernel/locking/mutex.c:585 [inline]
__mutex_lock+0xc1/0xd70 kernel/locking/mutex.c:752
hci_connect_cfm include/net/bluetooth/hci_core.h:2004 [inline]
hci_le_create_big_complete_evt+0x3d9/0xae0 net/bluetooth/hci_event.c:6939
hci_event_func net/bluetooth/hci_event.c:7514 [inline]
hci_event_packet+0xa53/0x1540 net/bluetooth/hci_event.c:7569
hci_rx_work+0x3e8/0xca0 net/bluetooth/hci_core.c:4171
process_one_work kernel/workqueue.c:3254 [inline]
process_scheduled_works+0xa00/0x1770 kernel/workqueue.c:3335
worker_thread+0x86d/0xd70 kernel/workqueue.c:3416
kthread+0x2f0/0x390 kernel/kthread.c:388
ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:243
</TASK>

Reported-by: syzbot+2fb0835e0c9cefc34614@syzkaller.appspotmail.com
Tested-by: syzbot+2fb0835e0c9cefc34614@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=2fb0835e0c9cefc34614
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Merge tag 'nf-24-12-11' of git://git./linux/kernel/git/netfilter/nf

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for net:

1) Fix bogus test reports in rpath.sh selftest by adding permanent
   neighbor entries, from Phil Sutter.

2) Lockdep reports possible ABBA deadlock in xt_IDLETIMER, fix it by
   removing sysfs out of the mutex section, also from Phil Sutter.

3) It is illegal to release basechain via RCU callback, for several
   reasons. Keep it simple and safe by calling synchronize_rcu() instead.
   This is a partially reverting a botched recent attempt of me to fix
   this basechain release path on netdevice removal.
   From Florian Westphal.

netfilter pull request 24-12-11

* tag 'nf-24-12-11' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
  netfilter: nf_tables: do not defer rule destruction via call_rcu
  netfilter: IDLETIMER: Fix for possible ABBA deadlock
  selftests: netfilter: Stabilize rpath.sh
====================

Link: https://patch.msgid.link/20241211230130.176937-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

team: Fix feature propagation of NETIF_F_GSO_ENCAP_ALL

Similar to bonding driver, add NETIF_F_GSO_ENCAP_ALL to TEAM_VLAN_FEATURES
in order to support slave devices which propagate NETIF_F_GSO_UDP_TUNNEL &
NETIF_F_GSO_UDP_TUNNEL_CSUM as vlan_features.

Fixes: 3625920b62c3 ("teaming: fix vlan_features computing")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Nikolay Aleksandrov <razor@blackwall.org>
Cc: Ido Schimmel <idosch@idosch.org>
Cc: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20241210141245.327886-5-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

team: Fix initial vlan_feature set in __team_compute_features

Similarly as with bonding, fix the calculation of vlan_features to reuse
netdev_base_features() in order derive the set in the same way as
ndo_fix_features before iterating through the slave devices to refine the
feature set.

Fixes: 3625920b62c3 ("teaming: fix vlan_features computing")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Nikolay Aleksandrov <razor@blackwall.org>
Cc: Ido Schimmel <idosch@idosch.org>
Cc: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20241210141245.327886-4-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

bonding: Fix feature propagation of NETIF_F_GSO_ENCAP_ALL

Drivers like mlx5 expose NIC's vlan_features such as
NETIF_F_GSO_UDP_TUNNEL & NETIF_F_GSO_UDP_TUNNEL_CSUM which are
later not propagated when the underlying devices are bonded and
a vlan device created on top of the bond.

Right now, the more cumbersome workaround for this is to create
the vlan on top of the mlx5 and then enslave the vlan devices
to a bond.

To fix this, add NETIF_F_GSO_ENCAP_ALL to BOND_VLAN_FEATURES
such that bond_compute_features() can probe and propagate the
vlan_features from the slave devices up to the vlan device.

Given the following bond:

  # ethtool -i enp2s0f{0,1}np{0,1}
  driver: mlx5_core
  [...]

  # ethtool -k enp2s0f0np0 | grep udp
  tx-udp_tnl-segmentation: on
  tx-udp_tnl-csum-segmentation: on
  tx-udp-segmentation: on
  rx-udp_tunnel-port-offload: on
  rx-udp-gro-forwarding: off

  # ethtool -k enp2s0f1np1 | grep udp
  tx-udp_tnl-segmentation: on
  tx-udp_tnl-csum-segmentation: on
  tx-udp-segmentation: on
  rx-udp_tunnel-port-offload: on
  rx-udp-gro-forwarding: off

  # ethtool -k bond0 | grep udp
  tx-udp_tnl-segmentation: on
  tx-udp_tnl-csum-segmentation: on
  tx-udp-segmentation: on
  rx-udp_tunnel-port-offload: off [fixed]
  rx-udp-gro-forwarding: off

Before:

  # ethtool -k bond0.100 | grep udp
  tx-udp_tnl-segmentation: off [requested on]
  tx-udp_tnl-csum-segmentation: off [requested on]
  tx-udp-segmentation: on
  rx-udp_tunnel-port-offload: off [fixed]
  rx-udp-gro-forwarding: off

After:

  # ethtool -k bond0.100 | grep udp
  tx-udp_tnl-segmentation: on
  tx-udp_tnl-csum-segmentation: on
  tx-udp-segmentation: on
  rx-udp_tunnel-port-offload: off [fixed]
  rx-udp-gro-forwarding: off

Various users have run into this reporting performance issues when
configuring Cilium in vxlan tunneling mode and having the combination
of bond & vlan for the core devices connecting the Kubernetes cluster
to the outside world.

Fixes: a9b3ace44c7d ("bonding: fix vlan_features computing")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Nikolay Aleksandrov <razor@blackwall.org>
Cc: Ido Schimmel <idosch@idosch.org>
Cc: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20241210141245.327886-3-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

bonding: Fix initial {vlan,mpls}_feature set in bond_compute_features

If a bonding device has slave devices, then the current logic to derive
the feature set for the master bond device is limited in that flags which
are fully supported by the underlying slave devices cannot be propagated
up to vlan devices which sit on top of bond devices. Instead, these get
blindly masked out via current NETIF_F_ALL_FOR_ALL logic.

vlan_features and mpls_features should reuse netdev_base_features() in
order derive the set in the same way as ndo_fix_features before iterating
through the slave devices to refine the feature set.

Fixes: a9b3ace44c7d ("bonding: fix vlan_features computing")
Fixes: 2e770b507ccd ("net: bonding: Inherit MPLS features from slave devices")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Nikolay Aleksandrov <razor@blackwall.org>
Cc: Ido Schimmel <idosch@idosch.org>
Cc: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20241210141245.327886-2-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net, team, bonding: Add netdev_base_features helper

Both bonding and team driver have logic to derive the base feature
flags before iterating over their slave devices to refine the set
via netdev_increment_features().

Add a small helper netdev_base_features() so this can be reused
instead of having it open-coded multiple times.

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Nikolay Aleksandrov <razor@blackwall.org>
Cc: Ido Schimmel <idosch@idosch.org>
Cc: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20241210141245.327886-1-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

perf probe: Fix uninitialized variable

Since the linked fixes: commit, err is returned uninitialized due to the
removal of "return 0". Initialize err to fix it.

This fixes the following intermittent test failure on release builds:

$ perf test "testsuite_probe"
...
-- [ FAIL ] -- perf_probe :: test_invalid_options :: mutually exclusive options :: -L foo -V bar (output regexp parsing)
Regexp not found: \"Error: switch .+ cannot be used with switch .+\"
...

Fixes: 080e47b2a237 ("perf probe: Introduce quotation marks support")
Tested-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20241211085525.519458-2-james.clark@linaro.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>

net/sched: netem: account for backlog updates from child qdisc

In general, 'qlen' of any classful qdisc should keep track of the
number of packets that the qdisc itself and all of its children holds.
In case of netem, 'qlen' only accounts for the packets in its internal
tfifo. When netem is used with a child qdisc, the child qdisc can use
'qdisc_tree_reduce_backlog' to inform its parent, netem, about created
or dropped SKBs. This function updates 'qlen' and the backlog statistics
of netem, but netem does not account for changes made by a child qdisc.
'qlen' then indicates the wrong number of packets in the tfifo.
If a child qdisc creates new SKBs during enqueue and informs its parent
about this, netem's 'qlen' value is increased. When netem dequeues the
newly created SKBs from the child, the 'qlen' in netem is not updated.
If 'qlen' reaches the configured sch->limit, the enqueue function stops
working, even though the tfifo is not full.

Reproduce the bug:
Ensure that the sender machine has GSO enabled. Configure netem as root
qdisc and tbf as its child on the outgoing interface of the machine
as follows:
$ tc qdisc add dev <oif> root handle 1: netem delay 100ms limit 100
$ tc qdisc add dev <oif> parent 1:0 tbf rate 50Mbit burst 1542 latency 50ms

Send bulk TCP traffic out via this interface, e.g., by running an iPerf3
client on the machine. Check the qdisc statistics:
$ tc -s qdisc show dev <oif>

Statistics after 10s of iPerf3 TCP test before the fix (note that
netem's backlog > limit, netem stopped accepting packets):
qdisc netem 1: root refcnt 2 limit 1000 delay 100ms
Sent 2767766 bytes 1848 pkt (dropped 652, overlimits 0 requeues 0)
backlog 4294528236b 1155p requeues 0
qdisc tbf 10: parent 1:1 rate 50Mbit burst 1537b lat 50ms
Sent 2767766 bytes 1848 pkt (dropped 327, overlimits 7601 requeues 0)
backlog 0b 0p requeues 0

Statistics after the fix:
qdisc netem 1: root refcnt 2 limit 1000 delay 100ms
Sent 37766372 bytes 24974 pkt (dropped 9, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
qdisc tbf 10: parent 1:1 rate 50Mbit burst 1537b lat 50ms
Sent 37766372 bytes 24974 pkt (dropped 327, overlimits 96017 requeues 0)
backlog 0b 0p requeues 0

tbf segments the GSO SKBs (tbf_segment) and updates the netem's 'qlen'.
The interface fully stops transferring packets and "locks". In this case,
the child qdisc and tfifo are empty, but 'qlen' indicates the tfifo is at
its limit and no more packets are accepted.

This patch adds a counter for the entries in the tfifo. Netem's 'qlen' is
only decreased when a packet is returned by its dequeue function, and not
during enqueuing into the child qdisc. External updates to 'qlen' are thus
accounted for and only the behavior of the backlog statistics changes. As
in other qdiscs, 'qlen' then keeps track of how many packets are held in
netem and all of its children. As before, sch->limit remains as the
maximum number of packets in the tfifo. The same applies to netem's
backlog statistics.

Fixes: 50612537e9ab ("netem: fix classful handling")
Signed-off-by: Martin Ottens <martin.ottens@fau.de>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20241210131412.1837202-1-martin.ottens@fau.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'batadv-net-pullrequest-20241210' of git://git.open-mesh.org/linux-merge

Simon Wunderlich says:

====================
Here are some batman-adv bugfixes:

- fix TT unitialized data and size limit issues, by Remi Pommarel
  (3 patches)

* tag 'batadv-net-pullrequest-20241210' of git://git.open-mesh.org/linux-merge:
  batman-adv: Do not let TT changes list grows indefinitely
  batman-adv: Remove uninitialized data in full table TT response
  batman-adv: Do not send uninitialized TT changes
====================

Link: https://patch.msgid.link/20241210135024.39068-1-sw@simonwunderlich.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: dsa: felix: fix stuck CPU-injected packets with short taprio windows

With this port schedule:

tc qdisc replace dev $send_if parent root handle 100 taprio \
num_tc 8 queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 \
map 0 1 2 3 4 5 6 7 \
base-time 0 cycle-time 10000 \
sched-entry S 01 1250 \
sched-entry S 02 1250 \
sched-entry S 04 1250 \
sched-entry S 08 1250 \
sched-entry S 10 1250 \
sched-entry S 20 1250 \
sched-entry S 40 1250 \
sched-entry S 80 1250 \
flags 2

ptp4l would fail to take TX timestamps of Pdelay_Resp messages like this:

increasing tx_timestamp_timeout may correct this issue, but it is likely caused by a driver bug
ptp4l[4134.168]: port 2: send peer delay response failed

It turns out that the driver can't take their TX timestamps because it
can't transmit them in the first place. And there's nothing special
about the Pdelay_Resp packets - they're just regular 68 byte packets.
But with this taprio configuration, the switch would refuse to send even
the ETH_ZLEN minimum packet size.

This should have definitely not been the case. When applying the taprio
config, the driver prints:

mscc_felix 0000:00:00.5: port 0 tc 0 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 132 octets including FCS
mscc_felix 0000:00:00.5: port 0 tc 1 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 132 octets including FCS
mscc_felix 0000:00:00.5: port 0 tc 2 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 132 octets including FCS
mscc_felix 0000:00:00.5: port 0 tc 3 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 132 octets including FCS
mscc_felix 0000:00:00.5: port 0 tc 4 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 132 octets including FCS
mscc_felix 0000:00:00.5: port 0 tc 5 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 132 octets including FCS
mscc_felix 0000:00:00.5: port 0 tc 6 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 132 octets including FCS
mscc_felix 0000:00:00.5: port 0 tc 7 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 132 octets including FCS

and thus, everything under 132 bytes - ETH_FCS_LEN should have been sent
without problems. Yet it's not.

For the forwarding path, the configuration is fine, yet packets injected
from Linux get stuck with this schedule no matter what.

The first hint that the static guard bands are the cause of the problem
is that reverting Michael Walle's commit 297c4de6f780 ("net: dsa: felix:
re-enable TAS guard band mode") made things work. It must be that the
guard bands are calculated incorrectly.

I remembered that there is a magic constant in the driver, set to 33 ns
for no logical reason other than experimentation, which says "never let
the static guard bands get so large as to leave less than this amount of
remaining space in the time slot, because the queue system will refuse
to schedule packets otherwise, and they will get stuck". I had a hunch
that my previous experimentally-determined value was only good for
packets coming from the forwarding path, and that the CPU injection path
needed more.

I came to the new value of 35 ns through binary search, after seeing
that with 544 ns (the bit time required to send the Pdelay_Resp packet
at gigabit) it works. Again, this is purely experimental, there's no
logic and the manual doesn't say anything.

The new driver prints for this schedule look like this:

mscc_felix 0000:00:00.5: port 0 tc 0 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 131 octets including FCS
mscc_felix 0000:00:00.5: port 0 tc 1 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 131 octets including FCS
mscc_felix 0000:00:00.5: port 0 tc 2 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 131 octets including FCS
mscc_felix 0000:00:00.5: port 0 tc 3 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 131 octets including FCS
mscc_felix 0000:00:00.5: port 0 tc 4 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 131 octets including FCS
mscc_felix 0000:00:00.5: port 0 tc 5 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 131 octets including FCS
mscc_felix 0000:00:00.5: port 0 tc 6 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 131 octets including FCS
mscc_felix 0000:00:00.5: port 0 tc 7 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 131 octets including FCS

So yes, the maximum MTU is now even smaller by 1 byte than before.
This is maybe counter-intuitive, but makes more sense with a diagram of
one time slot.

Before:

Gate open                                   Gate close
|                                                    |
v           1250 ns total time slot duration         v
<---------------------------------------------------->
<----><---------------------------------------------->
  33 ns            1217 ns static guard band
  useful

Gate open                                   Gate close
|                                                    |
v           1250 ns total time slot duration         v
<---------------------------------------------------->
<-----><--------------------------------------------->
  35 ns            1215 ns static guard band
  useful

The static guard band implemented by this switch hardware directly
determines the maximum allowable MTU for that traffic class. The larger
it is, the earlier the switch will stop scheduling frames for
transmission, because otherwise they might overrun the gate close time
(and avoiding that is the entire purpose of Michael's patch).
So, we now have guard bands smaller by 2 ns, thus, in this particular
case, we lose a byte of the maximum MTU.

Fixes: 11afdc6526de ("net: dsa: felix: tc-taprio intervals smaller than MTU should send at least one packet")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Michael Walle <mwalle@kernel.org>
Link: https://patch.msgid.link/20241210132640.3426788-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

splice: do not checksum AF_UNIX sockets

When `skb_splice_from_iter` was introduced, it inadvertently added
checksumming for AF_UNIX sockets. This resulted in significant
slowdowns, for example when using sendfile over unix sockets.

Using the test code in [1] in my test setup (2G single core qemu),
the client receives a 1000M file in:
- without the patch: 1482ms (+/- 36ms)
- with the patch: 652.5ms (+/- 22.9ms)

This commit addresses the issue by marking checksumming as unnecessary in
`unix_stream_sendmsg`

Cc: stable@vger.kernel.org
Signed-off-by: Frederik Deweerdt <deweerdt.lkml@gmail.com>
Fixes: 2e910b95329c ("net: Add a function to splice pages into an skbuff for MSG_SPLICE_PAGES")
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/Z1fMaHkRf8cfubuE@xiberoa
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: usb: qmi_wwan: add Telit FE910C04 compositions

Add the following Telit FE910C04 compositions:

0x10c0: rmnet + tty (AT/NMEA) + tty (AT) + tty (diag)
T:  Bus=02 Lev=01 Prnt=03 Port=06 Cnt=01 Dev#= 13 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1bc7 ProdID=10c0 Rev=05.15
S:  Manufacturer=Telit Cinterion
S:  Product=FE910
S:  SerialNumber=f71b8b32
C:  #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=82(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
I:  If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=84(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=86(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

0x10c4: rmnet + tty (AT) + tty (AT) + tty (diag)
T:  Bus=02 Lev=01 Prnt=03 Port=06 Cnt=01 Dev#= 14 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1bc7 ProdID=10c4 Rev=05.15
S:  Manufacturer=Telit Cinterion
S:  Product=FE910
S:  SerialNumber=f71b8b32
C:  #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=82(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
I:  If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=84(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=86(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

0x10c8: rmnet + tty (AT) + tty (diag) + DPL (data packet logging) + adb
T:  Bus=02 Lev=01 Prnt=03 Port=06 Cnt=01 Dev#= 17 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1bc7 ProdID=10c8 Rev=05.15
S:  Manufacturer=Telit Cinterion
S:  Product=FE910
S:  SerialNumber=f71b8b32
C:  #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=82(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
I:  If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=84(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none)
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Link: https://patch.msgid.link/20241209151821.3688829-1-dnlplm@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'mana-fix-few-memory-leaks-in-mana_gd_setup_irqs'

Maxim Levitsky says:

====================
MANA: Fix few memory leaks in mana_gd_setup_irqs

Fix 2 minor memory leaks in the mana driver,
introduced by commit
====================

Link: https://patch.msgid.link/20241209175751.287738-1-mlevitsk@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: mana: Fix irq_contexts memory leak in mana_gd_setup_irqs

gc->irq_contexts is not freeded if one of the later operations
fail.

Suggested-by: Michael Kelley <mhklinux@outlook.com>
Fixes: 8afefc361209 ("net: mana: Assigning IRQ affinity on HT cores")
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Reviewed-by: Yury Norov <yury.norov@gmail.com>
Link: https://patch.msgid.link/20241209175751.287738-3-mlevitsk@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: mana: Fix memory leak in mana_gd_setup_irqs

Commit 8afefc361209 ("net: mana: Assigning IRQ affinity on HT cores")
added memory allocation in mana_gd_setup_irqs of 'irqs' but the code
doesn't free this temporary array in the success path.

This was caught by kmemleak.

Fixes: 8afefc361209 ("net: mana: Assigning IRQ affinity on HT cores")
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Reviewed-by: Yury Norov <yury.norov@gmail.com>
Link: https://patch.msgid.link/20241209175751.287738-2-mlevitsk@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

MAINTAINERS: Add ethtool.h to NETWORKING [GENERAL]

This is part of an effort to assign a section in MAINTAINERS to header
files related to Networking. In this case the files named ethool.h.

Signed-off-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241210-mnt-ethtool-h-v1-1-2a40b567939d@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

netfilter: nf_tables: do not defer rule destruction via call_rcu

nf_tables_chain_destroy can sleep, it can't be used from call_rcu
callbacks.

Moreover, nf_tables_rule_release() is only safe for error unwinding,
while transaction mutex is held and the to-be-desroyed rule was not
exposed to either dataplane or dumps, as it deactives+frees without
the required synchronize_rcu() in-between.

nft_rule_expr_deactivate() callbacks will change ->use counters
of other chains/sets, see e.g. nft_lookup .deactivate callback, these
must be serialized via transaction mutex.

Also add a few lockdep asserts to make this more explicit.

Calling synchronize_rcu() isn't ideal, but fixing this without is hard
and way more intrusive. As-is, we can get:

WARNING: .. net/netfilter/nf_tables_api.c:5515 nft_set_destroy+0x..
Workqueue: events nf_tables_trans_destroy_work
RIP: 0010:nft_set_destroy+0x3fe/0x5c0
Call Trace:
<TASK>
nf_tables_trans_destroy_work+0x6b7/0xad0
process_one_work+0x64a/0xce0
worker_thread+0x613/0x10d0

In case the synchronize_rcu becomes an issue, we can explore alternatives.

One way would be to allocate nft_trans_rule objects + one nft_trans_chain
object, deactivate the rules + the chain and then defer the freeing to the
nft destroy workqueue. We'd still need to keep the synchronize_rcu path as
a fallback to handle -ENOMEM corner cases though.

Reported-by: syzbot+b26935466701e56cfdc2@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/67478d92.050a0220.253251.0062.GAE@google.com/T/
Fixes: c03d278fdf35 ("netfilter: nf_tables: wait for rcu grace period on net_device removal")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: IDLETIMER: Fix for possible ABBA deadlock

Deletion of the last rule referencing a given idletimer may happen at
the same time as a read of its file in sysfs:

| ======================================================
| WARNING: possible circular locking dependency detected
| 6.12.0-rc7-01692-g5e9a28f41134-dirty #594 Not tainted
| ------------------------------------------------------
| iptables/3303 is trying to acquire lock:
| ffff8881057e04b8 (kn->active#48){++++}-{0:0}, at: __kernfs_remove+0x20
|
| but task is already holding lock:
| ffffffffa0249068 (list_mutex){+.+.}-{3:3}, at: idletimer_tg_destroy_v]
|
| which lock already depends on the new lock.

A simple reproducer is:

| #!/bin/bash
|
| while true; do
|         iptables -A INPUT -i foo -j IDLETIMER --timeout 10 --label "testme"
|         iptables -D INPUT -i foo -j IDLETIMER --timeout 10 --label "testme"
| done &
| while true; do
|         cat /sys/class/xt_idletimer/timers/testme >/dev/null
| done

Avoid this by freeing list_mutex right after deleting the element from
the list, then continuing with the teardown.

Fixes: 0902b469bd25 ("netfilter: xtables: idletimer target implementation")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

selftests: netfilter: Stabilize rpath.sh

On some systems, neighbor discoveries from ns1 for fec0:42::1 (i.e., the
martian trap address) would happen at the wrong time and cause
false-negative test result.

Problem analysis also discovered that IPv6 martian ping test was broken
in that sent neighbor discoveries, not echo requests were inadvertently
trapped

Avoid the race condition by introducing the neighbors to each other
upfront. Also pin down the firewall rules to matching on echo requests
only.

Fixes: efb056e5f1f0 ("netfilter: ip6t_rpfilter: Fix regression with VRF interfaces")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Revert "unicode: Don't special case ignorable code points"

This reverts commit 5c26d2f1d3f5e4be3e196526bead29ecb139cf91.

It turns out that we can't do this, because while the old behavior of
ignoring ignorable code points was most definitely wrong, we have
case-folding filesystems with on-disk hash values with that wrong
behavior.

So now you can't look up those names, because they hash to something
different.

Of course, it's also entirely possible that in the meantime people have
created *new* files with the new ("more correct") case folding logic,
and reverting will just make other things break.

The correct solution is to not do case folding in filesystems, but
sadly, people seem to never really understand that. People still see it
as a feature, not a bug.

Reported-by: Qi Han <hanqi@vivo.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219586
Cc: Gabriel Krisman Bertazi <krisman@suse.de>
Requested-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'vfio-v6.13-rc3' of https://github.com/awilliam/linux-vfio

Pull vfio fix from Alex Williamson:

- Fix migration dirty page tracking support in the mlx5-vfio-pci
   variant driver in configurations where the system page size exceeds
   the device maximum message size, and anticipate device updates where
   the opposite may also be required (Yishai Hadas)

* tag 'vfio-v6.13-rc3' of https://github.com/awilliam/linux-vfio:
  vfio/mlx5: Align the page tracking max message size with the device capability

Merge tag 'linux_kselftest-fixes-6.13-rc3' of git://git./linux/kernel/git/shuah/linux-kselftest

Pull Kselftest fix from Shuah Khan:

- fix the offset for kprobe syntax error test case when checking the
BTF arguments on 64-bit powerpc

* tag 'linux_kselftest-fixes-6.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/ftrace: adjust offset for kprobe syntax error test

libperf: evlist: Fix --cpu argument on hybrid platform

Since the linked fixes: commit, specifying a CPU on hybrid platforms
results in an error because Perf tries to open an extended type event
on "any" CPU which isn't valid. Extended type events can only be opened
on CPUs that match the type.

Before (working):

  $ perf record --cpu 1 -- true
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 2.385 MB perf.data (7 samples) ]

After (not working):

  $ perf record -C 1 -- true
  WARNING: A requested CPU in '1' is not supported by PMU 'cpu_atom' (CPUs 16-27) for event 'cycles:P'
  Error:
  The sys_perf_event_open() syscall returned with 22 (Invalid argument) for event (cpu_atom/cycles:P/).
  /bin/dmesg | grep -i perf may provide additional information.

(Ignore the warning message, that's expected and not particularly
relevant to this issue).

This is because perf_cpu_map__intersect() of the user specified CPU (1)
and one of the PMU's CPUs (16-27) correctly results in an empty (NULL)
CPU map. However for the purposes of opening an event, libperf converts
empty CPU maps into an any CPU (-1) which the kernel rejects.

Fix it by deleting evsels with empty CPU maps in the specific case where
user requested CPU maps are evaluated.

Fixes: 251aa040244a ("perf parse-events: Wildcard most "numeric" events")
Reviewed-by: Ian Rogers <irogers@google.com>
Tested-by: Thomas Falcon <thomas.falcon@intel.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/r/20241114160450.295844-2-james.clark@linaro.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>

perf test expr: Fix system_tsc_freq for only x86

The refactoring of tool PMU events to have a PMU then adding the expr
literals to the tool PMU made it so that the literal system_tsc_freq
was only supported on x86. Update the test expectations to match -
namely the parsing is x86 specific and only yields a non-zero value on
Intel.

Fixes: 609aa2667f67 ("perf tool_pmu: Switch to standard pmu functions and json descriptions")
Reported-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Closes: https://lore.kernel.org/linux-perf-users/20241022140156.98854-1-atrajeev@linux.vnet.ibm.com/
Co-developed-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@linaro.org>
Cc: akanksha@linux.ibm.com
Cc: hbathini@linux.ibm.com
Cc: kjain@linux.ibm.com
Cc: maddy@linux.ibm.com
Cc: disgoel@linux.vnet.ibm.com
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20241205022305.158202-1-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>

selftests/ftrace: adjust offset for kprobe syntax error test

In 'NOFENTRY_ARGS' test case for syntax check, any offset X of
`vfs_read+X` except function entry offset (0) fits the criterion,
even if that offset is not at instruction boundary, as the parser
comes before probing. But with "ENDBR64" instruction on x86, offset
4 is treated as function entry. So, X can't be 4 as well. Thus, 8
was used as offset for the test case. On 64-bit powerpc though, any
offset <= 16 can be considered function entry depending on build
configuration (see arch_kprobe_on_func_entry() for implementation
details). So, use `vfs_read+20` to accommodate that scenario too.

Link: https://lore.kernel.org/r/20241129202621.721159-1-hbathini@linux.ibm.com
Fixes: 4231f30fcc34a ("selftests/ftrace: Add BTF arguments test cases")
Suggested-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

Bluetooth: Improve setsockopt() handling of malformed user input

The bt_copy_from_sockptr() return value is being misinterpreted by most
users: a non-zero result is mistakenly assumed to represent an error code,
but actually indicates the number of bytes that could not be copied.

Remove bt_copy_from_sockptr() and adapt callers to use
copy_safe_from_sockptr().

For sco_sock_setsockopt() (case BT_CODEC) use copy_struct_from_sockptr() to
scrub parts of uninitialized buffer.

Opportunistically, rename `len` to `optlen` in hci_sock_setsockopt_old()
and hci_sock_setsockopt().

Fixes: 51eda36d33e4 ("Bluetooth: SCO: Fix not validating setsockopt user input")
Fixes: a97de7bff13b ("Bluetooth: RFCOMM: Fix not validating setsockopt user input")
Fixes: 4f3951242ace ("Bluetooth: L2CAP: Fix not validating setsockopt user input")
Fixes: 9e8742cdfc4b ("Bluetooth: ISO: Fix not validating setsockopt user input")
Fixes: b2186061d604 ("Bluetooth: hci_sock: Fix not validating setsockopt user input")
Reviewed-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Reviewed-by: David Wei <dw@davidwei.uk>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

net: renesas: rswitch: handle stop vs interrupt race

Currently the stop routine of rswitch driver does not immediately
prevent hardware from continuing to update descriptors and requesting
interrupts.

It can happen that when rswitch_stop() executes the masking of
interrupts from the queues of the port being closed, napi poll for
that port is already scheduled or running on a different CPU. When
execution of this napi poll completes, it will unmask the interrupts.
And unmasked interrupt can fire after rswitch_stop() returns from
napi_disable() call. Then, the handler won't mask it, because
napi_schedule_prep() will return false, and interrupt storm will
happen.

This can't be fixed by making rswitch_stop() call napi_disable() before
masking interrupts. In this case, the interrupt storm will happen if
interrupt fires between napi_disable() and masking.

Fix this by checking for priv->opened_ports bit when unmasking
interrupts after napi poll. For that to be consistent, move
priv->opened_ports changes into spinlock-protected areas, and reorder
other operations in rswitch_open() and rswitch_stop() accordingly.

Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Fixes: 3590918b5d07 ("net: ethernet: renesas: Add support for "Ethernet Switch"")
Link: https://patch.msgid.link/20241209113204.175015-1-nikita.yoush@cogentembedded.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'net-renesas-rswitch-several-fixes'

Nikita Yushchenko says:

====================
net: renesas: rswitch: several fixes

This series fixes several glitches found in the rswitch driver.

Repost of https://lore.kernel.org/20241206190015.4194153-1-nikita.yoush@cogentembedded.com
====================

Link: https://patch.msgid.link/20241208095004.69468-1-nikita.yoush@cogentembedded.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: renesas: rswitch: avoid use-after-put for a device tree node

The device tree node saved in the rswitch_device structure is used at
several driver locations. So passing this node to of_node_put() after
the first use is wrong.

Move of_node_put() for this node to exit paths.

Fixes: b46f1e579329 ("net: renesas: rswitch: Simplify struct phy * handling")
Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://patch.msgid.link/20241208095004.69468-5-nikita.yoush@cogentembedded.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: renesas: rswitch: fix leaked pointer on error path

If error path is taken while filling descriptor for a frame, skb
pointer is left in the entry. Later, on the ring entry reuse, the
same entry could be used as a part of a multi-descriptor frame,
and skb for that new frame could be stored in a different entry.

Then, the stale pointer will reach the completion routine, and passed
to the release operation.

Fix that by clearing the saved skb pointer at the error path.

Fixes: d2c96b9d5f83 ("net: rswitch: Add jumbo frames handling for TX")
Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://patch.msgid.link/20241208095004.69468-4-nikita.yoush@cogentembedded.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: renesas: rswitch: fix race window between tx start and complete

If hardware is already transmitting, it can start handling the
descriptor being written to immediately after it observes updated DT
field, before the queue is kicked by a write to GWTRC.

If the start_xmit() execution is preempted at unfortunate moment, this
transmission can complete, and interrupt handled, before gq->cur gets
updated. With the current implementation of completion, this will cause
the last entry not completed.

Fix that by changing completion loop to check DT values directly, instead
of depending on gq->cur.

Fixes: 3590918b5d07 ("net: ethernet: renesas: Add support for "Ethernet Switch"")
Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://patch.msgid.link/20241208095004.69468-3-nikita.yoush@cogentembedded.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: renesas: rswitch: fix possible early skb release

When sending frame split into multiple descriptors, hardware processes
descriptors one by one, including writing back DT values. The first
descriptor could be already marked as completed when processing of
next descriptors for the same frame is still in progress.

Although only the last descriptor is configured to generate interrupt,
completion of the first descriptor could be noticed by the driver when
handling interrupt for the previous frame.

Currently, driver stores skb in the entry that corresponds to the first
descriptor. This results into skb could be unmapped and freed when
hardware did not complete the send yet. This opens a window for
corrupting the data being sent.

Fix this by saving skb in the entry that corresponds to the last
descriptor used to send the frame.

Fixes: d2c96b9d5f83 ("net: rswitch: Add jumbo frames handling for TX")
Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://patch.msgid.link/20241208095004.69468-2-nikita.yoush@cogentembedded.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'wireless-2024-12-10' of https://git./linux/kernel/git/wireless/wireless

Johannes Berg says:

====================
A small set of fixes:
- avoid CSA warnings during link removal
   (by changing link bitmap after remove)
- fix # of spatial streams initialisation
- fix queues getting stuck in some CSA cases
   and resume failures
- fix interface address when switching monitor mode
- fix MBSS change flags 32-bit stack corruption
- more UBSAN __counted_by "fixes" ...
- fix link ID netlink validation

* tag 'wireless-2024-12-10' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
  wifi: cfg80211: sme: init n_channels before channels[] access
  wifi: mac80211: fix station NSS capability initialization order
  wifi: mac80211: fix vif addr when switching from monitor to station
  wifi: mac80211: fix a queue stall in certain cases of CSA
  wifi: mac80211: wake the queues in case of failure in resume
  wifi: cfg80211: clear link ID from bitmap during link delete after clean up
  wifi: mac80211: init cnt before accessing elem in ieee80211_copy_mbssid_beacon
  wifi: mac80211: fix mbss changed flags corruption on 32 bit systems
  wifi: nl80211: fix NL80211_ATTR_MLO_LINK_ID off-by-one
====================

Link: https://patch.msgid.link/20241210130145.28618-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

tcp: check space before adding MPTCP SYN options

Ensure there is enough space before adding MPTCP options in
tcp_syn_options().

Without this check, 'remaining' could underflow, and causes issues. If
there is not enough space, MPTCP should not be used.

Signed-off-by: MoYuanhao <moyuanhao3676@163.com>
Fixes: cec37a6e41aa ("mptcp: Handle MP_CAPABLE options for outgoing connections")
Cc: stable@vger.kernel.org
Acked-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
[ Matt: Add Fixes, cc Stable, update Description ]
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241209-net-mptcp-check-space-syn-v1-1-2da992bb6f74@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Documentation: networking: Add a caveat to nexthop_compat_mode sysctl

net.ipv4.nexthop_compat_mode was added when nexthop objects were added to
provide the view of nexthop objects through the usual lens of the route
UAPI. As nexthop objects evolved, the information provided through this
lens became incomplete. For example, details of resilient nexthop groups
are obviously omitted.

Now that 16-bit nexthop group weights are a thing, the 8-bit UAPI cannot
convey the >8-bit weight accurately. Instead of inventing workarounds for
an obsolete interface, just document the expectations of inaccuracy.

Fixes: b72a6a7ab957 ("net: nexthop: Increase weight to u16")
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/b575e32399ccacd09079b2a218255164535123bd.1733740749.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

bnxt_en: Fix aggregation ID mask to prevent oops on 5760X chips

The 5760X (P7) chip's HW GRO/LRO interface is very similar to that of
the previous generation (5750X or P5).  However, the aggregation ID
fields in the completion structures on P7 have been redefined from
16 bits to 12 bits.  The freed up 4 bits are redefined for part of the
metadata such as the VLAN ID.  The aggregation ID mask was not modified
when adding support for P7 chips.  Including the extra 4 bits for the
aggregation ID can potentially cause the driver to store or fetch the
packet header of GRO/LRO packets in the wrong TPA buffer.  It may hit
the BUG() condition in __skb_pull() because the SKB contains no valid
packet header:

kernel BUG at include/linux/skbuff.h:2766!
Oops: invalid opcode: 0000 1 PREEMPT SMP NOPTI
CPU: 4 UID: 0 PID: 0 Comm: swapper/4 Kdump: loaded Tainted: G           OE      6.12.0-rc2+ #7
Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
Hardware name: Dell Inc. PowerEdge R760/0VRV9X, BIOS 1.0.1 12/27/2022
RIP: 0010:eth_type_trans+0xda/0x140
Code: 80 00 00 00 eb c1 8b 47 70 2b 47 74 48 8b 97 d0 00 00 00 83 f8 01 7e 1b 48 85 d2 74 06 66 83 3a ff 74 09 b8 00 04 00 00 eb a5 <0f> 0b b8 00 01 00 00 eb 9c 48 85 ff 74 eb 31 f6 b9 02 00 00 00 48
RSP: 0018:ff615003803fcc28 EFLAGS: 00010283
RAX: 00000000000022d2 RBX: 0000000000000003 RCX: ff2e8c25da334040
RDX: 0000000000000040 RSI: ff2e8c25c1ce8000 RDI: ff2e8c25869f9000
RBP: ff2e8c258c31c000 R08: ff2e8c25da334000 R09: 0000000000000001
R10: ff2e8c25da3342c0 R11: ff2e8c25c1ce89c0 R12: ff2e8c258e0990b0
R13: ff2e8c25bb120000 R14: ff2e8c25c1ce89c0 R15: ff2e8c25869f9000
FS:  0000000000000000(0000) GS:ff2e8c34be300000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055f05317e4c8 CR3: 000000108bac6006 CR4: 0000000000773ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<IRQ>
? die+0x33/0x90
? do_trap+0xd9/0x100
? eth_type_trans+0xda/0x140
? do_error_trap+0x65/0x80
? eth_type_trans+0xda/0x140
? exc_invalid_op+0x4e/0x70
? eth_type_trans+0xda/0x140
? asm_exc_invalid_op+0x16/0x20
? eth_type_trans+0xda/0x140
bnxt_tpa_end+0x10b/0x6b0 [bnxt_en]
? bnxt_tpa_start+0x195/0x320 [bnxt_en]
bnxt_rx_pkt+0x902/0xd90 [bnxt_en]
? __bnxt_tx_int.constprop.0+0x89/0x300 [bnxt_en]
? kmem_cache_free+0x343/0x440
? __bnxt_tx_int.constprop.0+0x24f/0x300 [bnxt_en]
__bnxt_poll_work+0x193/0x370 [bnxt_en]
bnxt_poll_p5+0x9a/0x300 [bnxt_en]
? try_to_wake_up+0x209/0x670
__napi_poll+0x29/0x1b0

Fix it by redefining the aggregation ID mask for P5_PLUS chips to be
12 bits.  This will work because the maximum aggregation ID is less
than 4096 on all P5_PLUS chips.

Fixes: 13d2d3d381ee ("bnxt_en: Add new P7 hardware interface definitions")
Reviewed-by: Damodharam Ammepalli <damodharam.ammepalli@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241209015448.1937766-1-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'clk-fixes-for-linus' of git://git./linux/kernel/git/clk/linux

Pull clk fixes from Stephen Boyd:
"Two reverts and two EN7581 driver fixes:

   - Revert the attempt to make CLK_GET_RATE_NOCACHE flag work in
     clk_set_rate() because it led to problems with the Qualcomm CPUFreq
     driver

   - Revert Amlogic reset driver back to the initial implementation.
     This broke probe of the audio subsystem on axg based platforms and
     also had compilation problems. We'll try again next time.

   - Fix a clk frequency and fix array bounds runtime checks in the
     Airoha EN7581 driver"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: en7523: Initialize num before accessing hws in en7523_register_clocks()
  clk: en7523: Fix wrong BUS clock for EN7581
  clk: amlogic: axg-audio: revert reset implementation
  Revert "clk: Fix invalid execution of clk_set_rate"

Merge tag 'for-6.13-rc2-tag' of git://git./linux/kernel/git/kdave/linux

Pull btrfs fixes from David Sterba:
"A few more fixes. Apart from the one liners and updated bio splitting
  error handling there's a fix for subvolume mount with different flags.
  This was known and fixed for some time but I've delayed it to give it
  more testing.

   - fix unbalanced locking when swapfile activation fails when the
     subvolume gets deleted in the meantime

   - add btrfs error handling after bio_split() calls that got error
     handling recently

   - during unmount, flush delalloc workers at the right time before the
     cleaner thread is shut down

   - fix regression in buffered write folio conversion, explicitly wait
     for writeback as FGP_STABLE flag is currently a no-op on btrfs

   - handle race in subvolume mount with different flags, the conversion
     to the new mount API did not handle the case where multiple
     subvolumes get mounted in parallel, which is a distro use case"

* tag 'for-6.13-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: flush delalloc workers queue before stopping cleaner kthread during unmount
  btrfs: handle bio_split() errors
  btrfs: properly wait for writeback before buffered write
  btrfs: fix missing snapshot drew unlock when root is dead during swap activation
  btrfs: fix mount failure due to remount races

Merge tag 'probes-fixes-v6.13-rc1' of git://git./linux/kernel/git/trace/linux-trace

Pull eprobes fix from Masami Hiramatsu:

- release eprobe when failing to add dyn_event.

   This unregisters event call and release eprobe when it fails to add a
   dynamic event. Found in cleaning up.

* tag 'probes-fixes-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  tracing/eprobe: Fix to release eprobe when failed to add dyn_event

ksmbd: set ATTR_CTIME flags when setting mtime

David reported that the new warning from setattr_copy_mgtime is coming
like the following.

[  113.215316] ------------[ cut here ]------------
[  113.215974] WARNING: CPU: 1 PID: 31 at fs/attr.c:300 setattr_copy+0x1ee/0x200
[  113.219192] CPU: 1 UID: 0 PID: 31 Comm: kworker/1:1 Not tainted 6.13.0-rc1+ #234
[  113.220127] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-3-gd478f380-rebuilt.opensuse.org 04/01/2014
[  113.221530] Workqueue: ksmbd-io handle_ksmbd_work [ksmbd]
[  113.222220] RIP: 0010:setattr_copy+0x1ee/0x200
[  113.222833] Code: 24 28 49 8b 44 24 30 48 89 53 58 89 43 6c 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc 48 89 df e8 77 d6 ff ff e9 cd fe ff ff <0f> 0b e9 be fe ff ff 66 0
[  113.225110] RSP: 0018:ffffaf218010fb68 EFLAGS: 00010202
[  113.225765] RAX: 0000000000000120 RBX: ffffa446815f8568 RCX: 0000000000000003
[  113.226667] RDX: ffffaf218010fd38 RSI: ffffa446815f8568 RDI: ffffffff94eb03a0
[  113.227531] RBP: ffffaf218010fb90 R08: 0000001a251e217d R09: 00000000675259fa
[  113.228426] R10: 0000000002ba8a6d R11: ffffa4468196c7a8 R12: ffffaf218010fd38
[  113.229304] R13: 0000000000000120 R14: ffffffff94eb03a0 R15: 0000000000000000
[  113.230210] FS:  0000000000000000(0000) GS:ffffa44739d00000(0000) knlGS:0000000000000000
[  113.231215] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  113.232055] CR2: 00007efe0053d27e CR3: 000000000331a000 CR4: 00000000000006b0
[  113.232926] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  113.233812] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  113.234797] Call Trace:
[  113.235116]  <TASK>
[  113.235393]  ? __warn+0x73/0xd0
[  113.235802]  ? setattr_copy+0x1ee/0x200
[  113.236299]  ? report_bug+0xf3/0x1e0
[  113.236757]  ? handle_bug+0x4d/0x90
[  113.237202]  ? exc_invalid_op+0x13/0x60
[  113.237689]  ? asm_exc_invalid_op+0x16/0x20
[  113.238185]  ? setattr_copy+0x1ee/0x200
[  113.238692]  btrfs_setattr+0x80/0x820 [btrfs]
[  113.239285]  ? get_stack_info_noinstr+0x12/0xf0
[  113.239857]  ? __module_address+0x22/0xa0
[  113.240368]  ? handle_ksmbd_work+0x6e/0x460 [ksmbd]
[  113.240993]  ? __module_text_address+0x9/0x50
[  113.241545]  ? __module_address+0x22/0xa0
[  113.242033]  ? unwind_next_frame+0x10e/0x920
[  113.242600]  ? __pfx_stack_trace_consume_entry+0x10/0x10
[  113.243268]  notify_change+0x2c2/0x4e0
[  113.243746]  ? stack_depot_save_flags+0x27/0x730
[  113.244339]  ? set_file_basic_info+0x130/0x2b0 [ksmbd]
[  113.244993]  set_file_basic_info+0x130/0x2b0 [ksmbd]
[  113.245613]  ? process_scheduled_works+0xbe/0x310
[  113.246181]  ? worker_thread+0x100/0x240
[  113.246696]  ? kthread+0xc8/0x100
[  113.247126]  ? ret_from_fork+0x2b/0x40
[  113.247606]  ? ret_from_fork_asm+0x1a/0x30
[  113.248132]  smb2_set_info+0x63f/0xa70 [ksmbd]

ksmbd is trying to set the atime and mtime via notify_change without also
setting the ctime. so This patch add ATTR_CTIME flags when setting mtime
to avoid a warning.

Reported-by: David Disseldorp <ddiss@suse.de>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>

ksmbd: fix racy issue from session lookup and expire

Increment the session reference count within the lock for lookup to avoid
racy issue with session expire.

Cc: stable@vger.kernel.org
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-25737
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>

ksmbd: retry iterate_dir in smb2_query_dir

Some file systems do not ensure that the single call of iterate_dir
reaches the end of the directory. For example, FUSE fetches entries from
a daemon using 4KB buffer and stops fetching if entries exceed the
buffer. And then an actor of caller, KSMBD, is used to fill the entries
from the buffer.
Thus, pattern searching on FUSE, files located after the 4KB could not
be found and STATUS_NO_SUCH_FILE was returned.

Signed-off-by: Hobin Woo <hobin.woo@samsung.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Reviewed-by: Namjae Jeon <linkinjeon@kernel.org>
Tested-by: Yoonho Shin <yoonho.shin@samsung.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>

udp: fix l4 hash after reconnect

After the blamed commit below, udp_rehash() is supposed to be called
with both local and remote addresses set.

Currently that is already the case for IPv6 sockets, but for IPv4 the
destination address is updated after rehashing.

Address the issue moving the destination address and port initialization
before rehashing.

Fixes: 1b29a730ef8b ("ipv6/udp: Add 4-tuple hash for connected socket")
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/4761e466ab9f7542c68cdc95f248987d127044d2.1733499715.git.pabeni@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

openrisc: Fix misalignments in head.S

Align all line continuations and (sub)section headers in a consistent
way.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Stafford Horne <shorne@gmail.com>

openrisc: place exception table at the head of vmlinux

Since commit 0043ecea2399 ("vmlinux.lds.h: Adjust symbol ordering in
text output section"), the exception table in arch/openrisc/kernel/head.S
is no longer positioned at the very beginning of the kernel image, which
causes a boot failure.

Currently, the exception table resides in the regular .text section.
Previously, it was placed at the head by relying on the linker receiving
arch/openrisc/kernel/head.o as the first object. However, this behavior
has changed because sections like .text.{asan,unknown,unlikely,hot} now
precede the regular .text section.

The .head.text section is intended for entry points requiring special
placement. However, in OpenRISC, this section has been misused: instead
of the entry points, it contains boot code meant to be discarded after
booting. This feature is typically handled by the .init.text section.

This commit addresses the issue by replacing the current __HEAD marker
with __INIT and re-annotating the entry points with __HEAD. Additionally,
it adds __REF to entry.S to suppress the following modpost warning:

WARNING: modpost: vmlinux: section mismatch in reference: _tng_kernel_start+0x70 (section: .text) -> _start (section: .init.text)

Fixes: 0043ecea2399 ("vmlinux.lds.h: Adjust symbol ordering in text output section")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Closes: https://lore.kernel.org/all/5e032233-5b65-4ad5-ac50-d2eb6c00171c@roeck-us.net/#t
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Rong Xu <xur@google.com>
Signed-off-by: Stafford Horne <shorne@gmail.com>

Merge branch 'virtio_net-correct-netdev_tx_reset_queue-invocation-points'

Koichiro Den says:

====================
virtio_net: correct netdev_tx_reset_queue() invocation points

When virtnet_close is followed by virtnet_open, some TX completions can
possibly remain unconsumed, until they are finally processed during the
first NAPI poll after the netdev_tx_reset_queue(), resulting in a crash
[1]. Commit b96ed2c97c79 ("virtio_net: move netdev_tx_reset_queue() call
before RX napi enable") was not sufficient to eliminate all BQL crash
scenarios for virtio-net.

This issue can be reproduced with the latest net-next master by running:
`while :; do ip l set DEV down; ip l set DEV up; done` under heavy network
TX load from inside the machine.

This patch series resolves the issue and also addresses similar existing
problems:

(a). Drop netdev_tx_reset_queue() from open/close path. This eliminates the
     BQL crashes due to the problematic open/close path.

(b). As a result of (a), netdev_tx_reset_queue() is now explicitly required
     in freeze/restore path. Add netdev_tx_reset_queue() immediately after
     free_unused_bufs() invocation.

(c). Fix missing resetting in virtnet_tx_resize().
     virtnet_tx_resize() has lacked proper resetting since commit
     c8bd1f7f3e61 ("virtio_net: add support for Byte Queue Limits").

(d). Fix missing resetting in the XDP_SETUP_XSK_POOL path.
     Similar to (c), this path lacked proper resetting. Call
     netdev_tx_reset_queue() when virtqueue_reset() has actually recycled
     unused buffers.

This patch series consists of six commits:
  [1/6]: Resolves (a) and (b).                      # also -stable 6.11.y
  [2/6]: Minor fix to make [4/6] streamlined.
  [3/6]: Prerequisite for (c).                      # also -stable 6.11.y
  [4/6]: Resolves (c) (incl. Prerequisite for (d))  # also -stable 6.11.y
  [5/6]: Preresuisite for (d).
  [6/6]: Resolves (d).

Changes for v4:
  - move netdev_tx_reset_queue() out of free_unused_bufs()
  - submit to net, not net-next
Changes for v3:
  - replace 'flushed' argument with 'recycle_done'
Changes for v2:
  - add tx queue resetting for (b) to (d) above

v3: https://lore.kernel.org/all/20241204050724.307544-1-koichiro.den@canonical.com/
v2: https://lore.kernel.org/all/20241203073025.67065-1-koichiro.den@canonical.com/
v1: https://lore.kernel.org/all/20241130181744.3772632-1-koichiro.den@canonical.com/

[1]:
------------[ cut here ]------------
kernel BUG at lib/dynamic_queue_limits.c:99!
Oops: invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
CPU: 7 UID: 0 PID: 1598 Comm: ip Tainted: G    N 6.12.0net-next_main+ #2
Tainted: [N]=TEST
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), \
BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
RIP: 0010:dql_completed+0x26b/0x290
Code: b7 c2 49 89 e9 44 89 da 89 c6 4c 89 d7 e8 ed 17 47 00 58 65 ff 0d
4d 27 90 7e 0f 85 fd fe ff ff e8 ea 53 8d ff e9 f3 fe ff ff <0f> 0b 01
d2 44 89 d1 29 d1 ba 00 00 00 00 0f 48 ca e9 28 ff ff ff
RSP: 0018:ffffc900002b0d08 EFLAGS: 00010297
RAX: 0000000000000000 RBX: ffff888102398c80 RCX: 0000000080190009
RDX: 0000000000000000 RSI: 000000000000006a RDI: 0000000000000000
RBP: ffff888102398c00 R08: 0000000000000000 R09: 0000000000000000
R10: 00000000000000ca R11: 0000000000015681 R12: 0000000000000001
R13: ffffc900002b0d68 R14: ffff88811115e000 R15: ffff8881107aca40
FS:  00007f41ded69500(0000) GS:ffff888667dc0000(0000)
knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000556ccc2dc1a0 CR3: 0000000104fd8003 CR4: 0000000000772ef0
PKRU: 55555554
Call Trace:
<IRQ>
? die+0x32/0x80
? do_trap+0xd9/0x100
? dql_completed+0x26b/0x290
? dql_completed+0x26b/0x290
? do_error_trap+0x6d/0xb0
? dql_completed+0x26b/0x290
? exc_invalid_op+0x4c/0x60
? dql_completed+0x26b/0x290
? asm_exc_invalid_op+0x16/0x20
? dql_completed+0x26b/0x290
__free_old_xmit+0xff/0x170 [virtio_net]
free_old_xmit+0x54/0xc0 [virtio_net]
virtnet_poll+0xf4/0xe30 [virtio_net]
? __update_load_avg_cfs_rq+0x264/0x2d0
? update_curr+0x35/0x260
? reweight_entity+0x1be/0x260
__napi_poll.constprop.0+0x28/0x1c0
net_rx_action+0x329/0x420
? enqueue_hrtimer+0x35/0x90
? trace_hardirqs_on+0x1d/0x80
? kvm_sched_clock_read+0xd/0x20
? sched_clock+0xc/0x30
? kvm_sched_clock_read+0xd/0x20
? sched_clock+0xc/0x30
? sched_clock_cpu+0xd/0x1a0
handle_softirqs+0x138/0x3e0
do_softirq.part.0+0x89/0xc0
</IRQ>
<TASK>
__local_bh_enable_ip+0xa7/0xb0
virtnet_open+0xc8/0x310 [virtio_net]
__dev_open+0xfa/0x1b0
__dev_change_flags+0x1de/0x250
dev_change_flags+0x22/0x60
do_setlink.isra.0+0x2df/0x10b0
? rtnetlink_rcv_msg+0x34f/0x3f0
? netlink_rcv_skb+0x54/0x100
? netlink_unicast+0x23e/0x390
? netlink_sendmsg+0x21e/0x490
? ____sys_sendmsg+0x31b/0x350
? avc_has_perm_noaudit+0x67/0xf0
? cred_has_capability.isra.0+0x75/0x110
? __nla_validate_parse+0x5f/0xee0
? __pfx___probestub_irq_enable+0x3/0x10
? __create_object+0x5e/0x90
? security_capable+0x3b/0x7\e[I0
rtnl_newlink+0x784/0xaf0
? avc_has_perm_noaudit+0x67/0xf0
? cred_has_capability.isra.0+0x75/0x110
? stack_depot_save_flags+0x24/0x6d0
? __pfx_rtnl_newlink+0x10/0x10
rtnetlink_rcv_msg+0x34f/0x3f0
? do_syscall_64+0x6c/0x180
? entry_SYSCALL_64_after_hwframe+0x76/0x7e
? __pfx_rtnetlink_rcv_msg+0x10/0x10
netlink_rcv_skb+0x54/0x100
netlink_unicast+0x23e/0x390
netlink_sendmsg+0x21e/0x490
____sys_sendmsg+0x31b/0x350
? copy_msghdr_from_user+0x6d/0xa0
___sys_sendmsg+0x86/0xd0
? __pte_offset_map+0x17/0x160
? preempt_count_add+0x69/0xa0
? __call_rcu_common.constprop.0+0x147/0x610
? preempt_count_add+0x69/0xa0
? preempt_count_add+0x69/0xa0
? _raw_spin_trylock+0x13/0x60
? trace_hardirqs_on+0x1d/0x80
__sys_sendmsg+0x66/0xc0
do_syscall_64+0x6c/0x180
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7f41defe5b34
Code: 15 e1 12 0f 00 f7 d8 64 89 02 b8 ff ff ff ff eb bf 0f 1f 44 00 00
f3 0f 1e fa 80 3d 35 95 0f 00 00 74 13 b8 2e 00 00 00 0f 05 <48> 3d 00
f0 ff ff 77 4c c3 0f 1f 00 55 48 89 e5 48 83 ec 20 89 55
RSP: 002b:00007ffe5336ecc8 EFLAGS: 00000202 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f41defe5b34
RDX: 0000000000000000 RSI: 00007ffe5336ed30 RDI: 0000000000000003
RBP: 00007ffe5336eda0 R08: 0000000000000010 R09: 0000000000000001
R10: 00007ffe5336f6f9 R11: 0000000000000202 R12: 0000000000000003
R13: 0000000067452259 R14: 0000556ccc28b040 R15: 0000000000000000
</TASK>
[...]
====================

Link: https://patch.msgid.link/20241206011047.923923-1-koichiro.den@canonical.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

virtio_net: ensure netdev_tx_reset_queue is called on bind xsk for tx

virtnet_sq_bind_xsk_pool() flushes tx skbs and then resets tx queue, so
DQL counters need to be reset when flushing has actually occurred, Add
virtnet_sq_free_unused_buf_done() as a callback for virtqueue_resize()
to handle this.

Fixes: 21a4e3ce6dc7 ("virtio_net: xsk: bind/unbind xsk for tx")
Signed-off-by: Koichiro Den <koichiro.den@canonical.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

virtio_ring: add a func argument 'recycle_done' to virtqueue_reset()

When virtqueue_reset() has actually recycled all unused buffers,
additional work may be required in some cases. Relying solely on its
return status is fragile, so introduce a new function argument
'recycle_done', which is invoked when it really occurs.

Signed-off-by: Koichiro Den <koichiro.den@canonical.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

virtio_net: ensure netdev_tx_reset_queue is called on tx ring resize

virtnet_tx_resize() flushes remaining tx skbs, requiring DQL counters to
be reset when flushing has actually occurred. Add
virtnet_sq_free_unused_buf_done() as a callback for virtqueue_reset() to
handle this.

Fixes: c8bd1f7f3e61 ("virtio_net: add support for Byte Queue Limits")
Cc: <stable@vger.kernel.org> # v6.11+
Signed-off-by: Koichiro Den <koichiro.den@canonical.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

virtio_ring: add a func argument 'recycle_done' to virtqueue_resize()

When virtqueue_resize() has actually recycled all unused buffers,
additional work may be required in some cases. Relying solely on its
return status is fragile, so introduce a new function argument
'recycle_done', which is invoked when the recycle really occurs.

Cc: <stable@vger.kernel.org> # v6.11+
Signed-off-by: Koichiro Den <koichiro.den@canonical.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

virtio_net: replace vq2rxq with vq2txq where appropriate

While not harmful, using vq2rxq where it's always sq appears odd.
Replace it with the more appropriate vq2txq for clarity and correctness.

Fixes: 89f86675cb03 ("virtio_net: xsk: tx: support xmit xsk buffer")
Signed-off-by: Koichiro Den <koichiro.den@canonical.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

virtio_net: correct netdev_tx_reset_queue() invocation point

When virtnet_close is followed by virtnet_open, some TX completions can
possibly remain unconsumed, until they are finally processed during the
first NAPI poll after the netdev_tx_reset_queue(), resulting in a crash
[1]. Commit b96ed2c97c79 ("virtio_net: move netdev_tx_reset_queue() call
before RX napi enable") was not sufficient to eliminate all BQL crash
cases for virtio-net.

This issue can be reproduced with the latest net-next master by running:
`while :; do ip l set DEV down; ip l set DEV up; done` under heavy network
TX load from inside the machine.

netdev_tx_reset_queue() can actually be dropped from virtnet_open path;
the device is not stopped in any case. For BQL core part, it's just like
traffic nearly ceases to exist for some period. For stall detector added
to BQL, even if virtnet_close could somehow lead to some TX completions
delayed for long, followed by virtnet_open, we can just take it as stall
as mentioned in commit 6025b9135f7a ("net: dqs: add NIC stall detector
based on BQL"). Note also that users can still reset stall_max via sysfs.

So, drop netdev_tx_reset_queue() from virtnet_enable_queue_pair(). This
eliminates the BQL crashes. As a result, netdev_tx_reset_queue() is now
explicitly required in freeze/restore path. This patch adds it to
immediately after free_unused_bufs(), following the rule of thumb:
netdev_tx_reset_queue() should follow any SKB freeing not followed by
netdev_tx_completed_queue(). This seems the most consistent and
streamlined approach, and now netdev_tx_reset_queue() runs whenever
free_unused_bufs() is done.

[1]:
------------[ cut here ]------------
kernel BUG at lib/dynamic_queue_limits.c:99!
Oops: invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
CPU: 7 UID: 0 PID: 1598 Comm: ip Tainted: G    N 6.12.0net-next_main+ #2
Tainted: [N]=TEST
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), \
BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
RIP: 0010:dql_completed+0x26b/0x290
Code: b7 c2 49 89 e9 44 89 da 89 c6 4c 89 d7 e8 ed 17 47 00 58 65 ff 0d
4d 27 90 7e 0f 85 fd fe ff ff e8 ea 53 8d ff e9 f3 fe ff ff <0f> 0b 01
d2 44 89 d1 29 d1 ba 00 00 00 00 0f 48 ca e9 28 ff ff ff
RSP: 0018:ffffc900002b0d08 EFLAGS: 00010297
RAX: 0000000000000000 RBX: ffff888102398c80 RCX: 0000000080190009
RDX: 0000000000000000 RSI: 000000000000006a RDI: 0000000000000000
RBP: ffff888102398c00 R08: 0000000000000000 R09: 0000000000000000
R10: 00000000000000ca R11: 0000000000015681 R12: 0000000000000001
R13: ffffc900002b0d68 R14: ffff88811115e000 R15: ffff8881107aca40
FS:  00007f41ded69500(0000) GS:ffff888667dc0000(0000)
knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000556ccc2dc1a0 CR3: 0000000104fd8003 CR4: 0000000000772ef0
PKRU: 55555554
Call Trace:
<IRQ>
? die+0x32/0x80
? do_trap+0xd9/0x100
? dql_completed+0x26b/0x290
? dql_completed+0x26b/0x290
? do_error_trap+0x6d/0xb0
? dql_completed+0x26b/0x290
? exc_invalid_op+0x4c/0x60
? dql_completed+0x26b/0x290
? asm_exc_invalid_op+0x16/0x20
? dql_completed+0x26b/0x290
__free_old_xmit+0xff/0x170 [virtio_net]
free_old_xmit+0x54/0xc0 [virtio_net]
virtnet_poll+0xf4/0xe30 [virtio_net]
? __update_load_avg_cfs_rq+0x264/0x2d0
? update_curr+0x35/0x260
? reweight_entity+0x1be/0x260
__napi_poll.constprop.0+0x28/0x1c0
net_rx_action+0x329/0x420
? enqueue_hrtimer+0x35/0x90
? trace_hardirqs_on+0x1d/0x80
? kvm_sched_clock_read+0xd/0x20
? sched_clock+0xc/0x30
? kvm_sched_clock_read+0xd/0x20
? sched_clock+0xc/0x30
? sched_clock_cpu+0xd/0x1a0
handle_softirqs+0x138/0x3e0
do_softirq.part.0+0x89/0xc0
</IRQ>
<TASK>
__local_bh_enable_ip+0xa7/0xb0
virtnet_open+0xc8/0x310 [virtio_net]
__dev_open+0xfa/0x1b0
__dev_change_flags+0x1de/0x250
dev_change_flags+0x22/0x60
do_setlink.isra.0+0x2df/0x10b0
? rtnetlink_rcv_msg+0x34f/0x3f0
? netlink_rcv_skb+0x54/0x100
? netlink_unicast+0x23e/0x390
? netlink_sendmsg+0x21e/0x490
? ____sys_sendmsg+0x31b/0x350
? avc_has_perm_noaudit+0x67/0xf0
? cred_has_capability.isra.0+0x75/0x110
? __nla_validate_parse+0x5f/0xee0
? __pfx___probestub_irq_enable+0x3/0x10
? __create_object+0x5e/0x90
? security_capable+0x3b/0x70
rtnl_newlink+0x784/0xaf0
? avc_has_perm_noaudit+0x67/0xf0
? cred_has_capability.isra.0+0x75/0x110
? stack_depot_save_flags+0x24/0x6d0
? __pfx_rtnl_newlink+0x10/0x10
rtnetlink_rcv_msg+0x34f/0x3f0
? do_syscall_64+0x6c/0x180
? entry_SYSCALL_64_after_hwframe+0x76/0x7e
? __pfx_rtnetlink_rcv_msg+0x10/0x10
netlink_rcv_skb+0x54/0x100
netlink_unicast+0x23e/0x390
netlink_sendmsg+0x21e/0x490
____sys_sendmsg+0x31b/0x350
? copy_msghdr_from_user+0x6d/0xa0
___sys_sendmsg+0x86/0xd0
? __pte_offset_map+0x17/0x160
? preempt_count_add+0x69/0xa0
? __call_rcu_common.constprop.0+0x147/0x610
? preempt_count_add+0x69/0xa0
? preempt_count_add+0x69/0xa0
? _raw_spin_trylock+0x13/0x60
? trace_hardirqs_on+0x1d/0x80
__sys_sendmsg+0x66/0xc0
do_syscall_64+0x6c/0x180
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7f41defe5b34
Code: 15 e1 12 0f 00 f7 d8 64 89 02 b8 ff ff ff ff eb bf 0f 1f 44 00 00
f3 0f 1e fa 80 3d 35 95 0f 00 00 74 13 b8 2e 00 00 00 0f 05 <48> 3d 00
f0 ff ff 77 4c c3 0f 1f 00 55 48 89 e5 48 83 ec 20 89 55
RSP: 002b:00007ffe5336ecc8 EFLAGS: 00000202 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f41defe5b34
RDX: 0000000000000000 RSI: 00007ffe5336ed30 RDI: 0000000000000003
RBP: 00007ffe5336eda0 R08: 0000000000000010 R09: 0000000000000001
R10: 00007ffe5336f6f9 R11: 0000000000000202 R12: 0000000000000003
R13: 0000000067452259 R14: 0000556ccc28b040 R15: 0000000000000000
</TASK>
[...]

Fixes: c8bd1f7f3e61 ("virtio_net: add support for Byte Queue Limits")
Cc: <stable@vger.kernel.org> # v6.11+
Signed-off-by: Koichiro Den <koichiro.den@canonical.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
[ pabeni: trimmed possibly troublesome separator ]
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

octeontx2-af: Fix installation of PF multicast rule

Due to target variable is being reassigned in npc_install_flow()
function, PF multicast rules are not getting installed.
This patch addresses the issue by fixing the "IF" condition
checks when rules are installed by AF.

Fixes: 6c40ca957fe5 ("octeontx2-pf: Adds TC offload support").
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241205113435.10601-1-gakula@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Merge branch 'qca_spi-fix-spi-specific-issues'

Stefan Wahren says:

====================
qca_spi: Fix SPI specific issues

This small series address two annoying SPI specific issues of
the qca_spi driver.
====================

Link: https://patch.msgid.link/20241206184643.123399-1-wahrenst@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

qca_spi: Make driver probing reliable

The module parameter qcaspi_pluggable controls if QCA7000 signature
should be checked at driver probe (current default) or not. Unfortunately
this could fail in case the chip is temporary in reset, which isn't under
total control by the Linux host. So disable this check per default
in order to avoid unexpected probe failures.

Fixes: 291ab06ecf67 ("net: qualcomm: new Ethernet over SPI driver for QCA7000")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://patch.msgid.link/20241206184643.123399-3-wahrenst@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>