jfs: prevent NULL deref in diFree

[ Upstream commit a53046291020ec41e09181396c1e829287b48d47 ]

Add validation check for JFS_IP(ipimap)->i_imap to prevent a NULL deref
in diFree since diFree uses it without do any validations.
When function jfs_mount calls diMount to initialize fileset inode
allocation map, it can fail and JFS_IP(ipimap)->i_imap won't be
initialized. Then it calls diFreeSpecial to close fileset inode allocation
map inode and it will flow into jfs_evict_inode. Function jfs_evict_inode
just validates JFS_SBI(inode->i_sb)->ipimap, then calls diFree. diFree use
JFS_IP(ipimap)->i_imap directly, then it will cause a NULL deref.

Reported-by: TCS Robot <tcs_robot@tencent.com>
Signed-off-by: Haimin Zhang <tcs_kernel@tencent.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

virtio_console: eliminate anonymous module_init & module_exit

[ Upstream commit fefb8a2a941338d871e2d83fbd65fbfa068857bd ]

Eliminate anonymous module_init() and module_exit(), which can lead to
confusion or ambiguity when reading System.map, crashes/oops/bugs,
or an initcall_debug log.

Give each of these init and exit functions unique driver-specific
names to eliminate the anonymous names.

Example 1: (System.map)
 ffffffff832fc78c t init
 ffffffff832fc79e t init
 ffffffff832fc8f8 t init

Example 2: (initcall_debug log)
 calling  init+0x0/0x12 @ 1
 initcall init+0x0/0x12 returned 0 after 15 usecs
 calling  init+0x0/0x60 @ 1
 initcall init+0x0/0x60 returned 0 after 2 usecs
 calling  init+0x0/0x9a @ 1
 initcall init+0x0/0x9a returned 0 after 74 usecs

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Amit Shah <amit@kernel.org>
Cc: virtualization@lists.linux-foundation.org
Cc: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20220316192010.19001-3-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

serial: samsung_tty: do not unlock port->lock for uart_write_wakeup()

[ Upstream commit 988c7c00691008ea1daaa1235680a0da49dab4e8 ]

The commit c15c3747ee32 (serial: samsung: fix potential soft lockup
during uart write) added an unlock of port->lock before
uart_write_wakeup() and a lock after it. It was always problematic to
write data from tty_ldisc_ops::write_wakeup and it was even documented
that way. We fixed the line disciplines to conform to this recently.
So if there is still a missed one, we should fix them instead of this
workaround.

On the top of that, s3c24xx_serial_tx_dma_complete() in this driver
still holds the port->lock while calling uart_write_wakeup().

So revert the wrap added by the commit above.

Cc: Thomas Abraham <thomas.abraham@linaro.org>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Hyeonkook Kim <hk619.kim@samsung.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220308115153.4225-1-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/Kconfig: Do not allow CONFIG_X86_X32_ABI=y with llvm-objcopy

[ Upstream commit aaeed6ecc1253ce1463fa1aca0b70a4ccbc9fa75 ]

There are two outstanding issues with CONFIG_X86_X32_ABI and
llvm-objcopy, with similar root causes:

1. llvm-objcopy does not properly convert .note.gnu.property when going
   from x86_64 to x86_x32, resulting in a corrupted section when
   linking:

   https://github.com/ClangBuiltLinux/linux/issues/1141

2. llvm-objcopy produces corrupted compressed debug sections when going
   from x86_64 to x86_x32, also resulting in an error when linking:

   https://github.com/ClangBuiltLinux/linux/issues/514

After commit 41c5ef31ad71 ("x86/ibt: Base IBT bits"), the
.note.gnu.property section is always generated when
CONFIG_X86_KERNEL_IBT is enabled, which causes the first issue to become
visible with an allmodconfig build:

  ld.lld: error: arch/x86/entry/vdso/vclock_gettime-x32.o:(.note.gnu.property+0x1c): program property is too short

To avoid this error, do not allow CONFIG_X86_X32_ABI to be selected when
using llvm-objcopy. If the two issues ever get fixed in llvm-objcopy,
this can be turned into a feature check.

Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220314194842.3452-3-nathan@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFS: swap-out must always use STABLE writes.

[ Upstream commit c265de257f558a05c1859ee9e3fed04883b9ec0e ]

The commit handling code is not safe against memory-pressure deadlocks
when writing to swap.  In particular, nfs_commitdata_alloc() blocks
indefinitely waiting for memory, and this can consume all available
workqueue threads.

swap-out most likely uses STABLE writes anyway as COND_STABLE indicates
that a stable write should be used if the write fits in a single
request, and it normally does.  However if we ever swap with a small
wsize, or gather unusually large numbers of pages for a single write,
this might change.

For safety, make it explicit in the code that direct writes used for swap
must always use FLUSH_STABLE.

Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFS: swap IO handling is slightly different for O_DIRECT IO

[ Upstream commit 64158668ac8b31626a8ce48db4cad08496eb8340 ]

1/ Taking the i_rwsem for swap IO triggers lockdep warnings regarding
   possible deadlocks with "fs_reclaim".  These deadlocks could, I believe,
   eventuate if a buffered read on the swapfile was attempted.

   We don't need coherence with the page cache for a swap file, and
   buffered writes are forbidden anyway.  There is no other need for
   i_rwsem during direct IO.  So never take it for swap_rw()

2/ generic_write_checks() explicitly forbids writes to swap, and
   performs checks that are not needed for swap.  So bypass it
   for swap_rw().

Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

SUNRPC: remove scheduling boost for "SWAPPER" tasks.

[ Upstream commit a80a8461868905823609be97f91776a26befe839 ]

Currently, tasks marked as "swapper" tasks get put to the front of
non-priority rpc_queues, and are sorted earlier than non-swapper tasks on
the transport's ->xmit_queue.

This is pointless as currently *all* tasks for a mount that has swap
enabled on *any* file are marked as "swapper" tasks.  So the net result
is that the non-priority rpc_queues are reverse-ordered (LIFO).

This scheduling boost is not necessary to avoid deadlocks, and hurts
fairness, so remove it.  If there were a need to expedite some requests,
the tk_priority mechanism is a more appropriate tool.

Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

SUNRPC/xprt: async tasks mustn't block waiting for memory

[ Upstream commit a721035477fb5fb8abc738fbe410b07c12af3dc5 ]

When memory is short, new worker threads cannot be created and we depend
on the minimum one rpciod thread to be able to handle everything.  So it
must not block waiting for memory.

xprt_dynamic_alloc_slot can block indefinitely.  This can tie up all
workqueue threads and NFS can deadlock.  So when called from a
workqueue, set __GFP_NORETRY.

The rdma alloc_slot already does not block.  However it sets the error
to -EAGAIN suggesting this will trigger a sleep.  It does not.  As we
can see in call_reserveresult(), only -ENOMEM causes a sleep.  -EAGAIN
causes immediate retry.

Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

SUNRPC/call_alloc: async tasks mustn't block waiting for memory

[ Upstream commit c487216bec83b0c5a8803e5c61433d33ad7b104d ]

When memory is short, new worker threads cannot be created and we depend
on the minimum one rpciod thread to be able to handle everything.
So it must not block waiting for memory.

mempools are particularly a problem as memory can only be released back
to the mempool by an async rpc task running.  If all available
workqueue threads are waiting on the mempool, no thread is available to
return anything.

rpc_malloc() can block, and this might cause deadlocks.
So check RPC_IS_ASYNC(), rather than RPC_IS_SWAPPER() to determine if
blocking is acceptable.

Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: Enforce that disjoints limits are invalid

[ Upstream commit 10c46f2ea914202482d19cf80dcc9c321c9ff59b ]

If we were to have two users of the same clock, doing something like:

clk_set_rate_range(user1, 1000, 2000);
clk_set_rate_range(user2, 3000, 4000);

The second call would fail with -EINVAL, preventing from getting in a
situation where we end up with impossible limits.

However, this is never explicitly checked against and enforced, and
works by relying on an undocumented behaviour of clk_set_rate().

Indeed, on the first clk_set_rate_range will make sure the current clock
rate is within the new range, so it will be between 1000 and 2000Hz. On
the second clk_set_rate_range(), it will consider (rightfully), that our
current clock is outside of the 3000-4000Hz range, and will call
clk_core_set_rate_nolock() to set it to 3000Hz.

clk_core_set_rate_nolock() will then call clk_calc_new_rates() that will
eventually check that our rate 3000Hz rate is outside the min 3000Hz max
2000Hz range, will bail out, the error will propagate and we'll
eventually return -EINVAL.

This solely relies on the fact that clk_calc_new_rates(), and in
particular clk_core_determine_round_nolock(), won't modify the new rate
allowing the error to be reported. That assumption won't be true for all
drivers, and most importantly we'll break that assumption in a later
patch.

It can also be argued that we shouldn't even reach the point where we're
calling clk_core_set_rate_nolock().

Let's make an explicit check for disjoints range before we're doing
anything.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220225143534.405820-4-maxime@cerno.tech
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: ti: Preserve node in ti_dt_clocks_register()

[ Upstream commit 80864594ff2ad002e2755daf97d46ff0c86faf1f ]

In preparation for making use of the clock-output-names, we want to
keep node around in ti_dt_clocks_register().

This change should not needed as a fix currently.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20220204071449.16762-3-tony@atomide.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xen: delay xen_hvm_init_time_ops() if kdump is boot on vcpu>=32

[ Upstream commit eed05744322da07dd7e419432dcedf3c2e017179 ]

The sched_clock() can be used very early since commit 857baa87b642
("sched/clock: Enable sched clock early"). In addition, with commit
38669ba205d1 ("x86/xen/time: Output xen sched_clock time from 0"), kdump
kernel in Xen HVM guest may panic at very early stage when accessing
&__this_cpu_read(xen_vcpu)->time as in below:

setup_arch()
 -> init_hypervisor_platform()
     -> x86_init.hyper.init_platform = xen_hvm_guest_init()
         -> xen_hvm_init_time_ops()
             -> xen_clocksource_read()
                 -> src = &__this_cpu_read(xen_vcpu)->time;

This is because Xen HVM supports at most MAX_VIRT_CPUS=32 'vcpu_info'
embedded inside 'shared_info' during early stage until xen_vcpu_setup() is
used to allocate/relocate 'vcpu_info' for boot cpu at arbitrary address.

However, when Xen HVM guest panic on vcpu >= 32, since
xen_vcpu_info_reset(0) would set per_cpu(xen_vcpu, cpu) = NULL when
vcpu >= 32, xen_clocksource_read() on vcpu >= 32 would panic.

This patch calls xen_hvm_init_time_ops() again later in
xen_hvm_smp_prepare_boot_cpu() after the 'vcpu_info' for boot vcpu is
registered when the boot vcpu is >= 32.

This issue can be reproduced on purpose via below command at the guest
side when kdump/kexec is enabled:

"taskset -c 33 echo c > /proc/sysrq-trigger"

The bugfix for PVM is not implemented due to the lack of testing
environment.

[boris: xen_hvm_init_time_ops() returns on errors instead of jumping to end]

Cc: Joe Jin <joe.jin@oracle.com>
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20220302164032.14569-3-dongli.zhang@oracle.com
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFSv4: Protect the state recovery thread against direct reclaim

[ Upstream commit 3e17898aca293a24dae757a440a50aa63ca29671 ]

If memory allocation triggers a direct reclaim from the state recovery
thread, then we can deadlock. Use memalloc_nofs_save/restore to ensure
that doesn't happen.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFSv4.2: fix reference count leaks in _nfs42_proc_copy_notify()

[ Upstream commit b7f114edd54326f730a754547e7cfb197b5bc132 ]

[You don't often get email from xiongx18@fudan.edu.cn. Learn why this is important at http://aka.ms/LearnAboutSenderIdentification.]

The reference counting issue happens in two error paths in the
function _nfs42_proc_copy_notify(). In both error paths, the function
simply returns the error code and forgets to balance the refcount of
object `ctx`, bumped by get_nfs_open_context() earlier, which may
cause refcount leaks.

Fix it by balancing refcount of the `ctx` object before the function
returns in both error paths.

Signed-off-by: Xin Xiong <xiongx18@fudan.edu.cn>
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

w1: w1_therm: fixes w1_seq for ds28ea00 sensors

[ Upstream commit 41a92a89eee819298f805c40187ad8b02bb53426 ]

w1_seq was failing due to several devices responding to the
CHAIN_DONE at the same time. Now properly selects the current
device in the chain with MATCH_ROM. Also acknowledgment was
read twice.

Signed-off-by: Lucas Denefle <lucas.denefle@converge.io>
Link: https://lore.kernel.org/r/20220223113558.232750-1-lucas.denefle@converge.io
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

staging: wfx: fix an error handling in wfx_init_common()

[ Upstream commit 60f1d3c92dc1ef1026e5b917a329a7fa947da036 ]

One error handler of wfx_init_common() return without calling
ieee80211_free_hw(hw), which may result in memory leak. And I add
one err label to unify the error handler, which is useful for the
subsequent changes.

Suggested-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Signed-off-by: Xiaoke Wang <xkernel.wang@foxmail.com>
Link: https://lore.kernel.org/r/tencent_24A24A3EFF61206ECCC4B94B1C5C1454E108@qq.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

phy: amlogic: meson8b-usb2: Use dev_err_probe()

[ Upstream commit 6466ba1898d415b527e1013bd8551a6fdfece94c ]

Use the existing dev_err_probe() helper instead of open-coding the same
operation.

Signed-off-by: Amjad Ouled-Ameur <aouledameur@baylibre.com>
Reported-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20220111095255.176141-3-aouledameur@baylibre.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

staging: vchiq_core: handle NULL result of find_service_by_handle

[ Upstream commit ca225857faf237234d2fffe5d1919467dfadd822 ]

In case of an invalid handle the function find_servive_by_handle
returns NULL. So take care of this and avoid a NULL pointer dereference.

Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/1642968143-19281-18-git-send-email-stefan.wahren@i2se.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: si5341: fix reported clk_rate when output divider is 2

[ Upstream commit 2a8b539433e111c4de364237627ef219d2f6350a ]

SI5341_OUT_CFG_RDIV_FORCE2 shall be checked first to distinguish whether
a divider for a given output is set to 2 (SI5341_OUT_CFG_RDIV_FORCE2
is set) or the output is disabled (SI5341_OUT_CFG_RDIV_FORCE2 not set,
SI5341_OUT_R_REG is set 0).
Before the change, divider set to 2 (SI5341_OUT_R_REG set to 0) was
interpreted as output is disabled.

Signed-off-by: Adam Wujek <dev_public@wujek.eu>
Link: https://lore.kernel.org/r/20211203141125.2447520-1-dev_public@wujek.eu
Reviewed-by: Robert Hancock <robert.hancock@calian.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

minix: fix bug when opening a file with O_DIRECT

[ Upstream commit 9ce3c0d26c42d279b6c378a03cd6a61d828f19ca ]

Testcase:
1. create a minix file system and mount it
2. open a file on the file system with O_RDWR|O_CREAT|O_TRUNC|O_DIRECT
3. open fails with -EINVAL but leaves an empty file behind. All other
   open() failures don't leave the failed open files behind.

It is hard to check the direct_IO op before creating the inode.  Just as
ext4 and btrfs do, this patch will resolve the issue by allowing to
create the file with O_DIRECT but returning error when writing the file.

Link: https://lkml.kernel.org/r/20220107133626.413379-1-qhjin.dev@gmail.com
Signed-off-by: Qinghua Jin <qhjin.dev@gmail.com>
Reported-by: Colin Ian King <colin.king@intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

init/main.c: return 1 from handled __setup() functions

[ Upstream commit f9a40b0890658330c83c95511f9d6b396610defc ]

initcall_blacklist() should return 1 to indicate that it handled its
cmdline arguments.

set_debug_rodata() should return 1 to indicate that it handled its
cmdline arguments.  Print a warning if the option string is invalid.

This prevents these strings from being added to the 'init' program's
environment as they are not init arguments/parameters.

Link: https://lkml.kernel.org/r/20220221050901.23985-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ceph: fix memory leak in ceph_readdir when note_last_dentry returns error

[ Upstream commit f639d9867eea647005dc824e0e24f39ffc50d4e4 ]

Reset the last_readdir at the same time, and add a comment explaining
why we don't free last_readdir when dir_emit returns false.

Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netlabel: fix out-of-bounds memory accesses

[ Upstream commit f22881de730ebd472e15bcc2c0d1d46e36a87b9c ]

In calipso_map_cat_ntoh(), in the for loop, if the return value of
netlbl_bitmap_walk() is equal to (net_clen_bits - 1), when
netlbl_bitmap_walk() is called next time, out-of-bounds memory accesses
of bitmap[byte_offset] occurs.

The bug was found during fuzzing. The following is the fuzzing report
 BUG: KASAN: slab-out-of-bounds in netlbl_bitmap_walk+0x3c/0xd0
 Read of size 1 at addr ffffff8107bf6f70 by task err_OH/252

 CPU: 7 PID: 252 Comm: err_OH Not tainted 5.17.0-rc7+ #17
 Hardware name: linux,dummy-virt (DT)
 Call trace:
  dump_backtrace+0x21c/0x230
  show_stack+0x1c/0x60
  dump_stack_lvl+0x64/0x7c
  print_address_description.constprop.0+0x70/0x2d0
  __kasan_report+0x158/0x16c
  kasan_report+0x74/0x120
  __asan_load1+0x80/0xa0
  netlbl_bitmap_walk+0x3c/0xd0
  calipso_opt_getattr+0x1a8/0x230
  calipso_sock_getattr+0x218/0x340
  calipso_sock_getattr+0x44/0x60
  netlbl_sock_getattr+0x44/0x80
  selinux_netlbl_socket_setsockopt+0x138/0x170
  selinux_socket_setsockopt+0x4c/0x60
  security_socket_setsockopt+0x4c/0x90
  __sys_setsockopt+0xbc/0x2b0
  __arm64_sys_setsockopt+0x6c/0x84
  invoke_syscall+0x64/0x190
  el0_svc_common.constprop.0+0x88/0x200
  do_el0_svc+0x88/0xa0
  el0_svc+0x128/0x1b0
  el0t_64_sync_handler+0x9c/0x120
  el0t_64_sync+0x16c/0x170

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: Fix use after free in hci_send_acl

[ Upstream commit f63d24baff787e13b723d86fe036f84bdbc35045 ]

This fixes the following trace caused by receiving
HCI_EV_DISCONN_PHY_LINK_COMPLETE which does call hci_conn_del without
first checking if conn->type is in fact AMP_LINK and in case it is
do properly cleanup upper layers with hci_disconn_cfm:

 ==================================================================
    BUG: KASAN: use-after-free in hci_send_acl+0xaba/0xc50
    Read of size 8 at addr ffff88800e404818 by task bluetoothd/142

    CPU: 0 PID: 142 Comm: bluetoothd Not tainted
    5.17.0-rc5-00006-gda4022eeac1a #7
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
    rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
    Call Trace:
     <TASK>
     dump_stack_lvl+0x45/0x59
     print_address_description.constprop.0+0x1f/0x150
     kasan_report.cold+0x7f/0x11b
     hci_send_acl+0xaba/0xc50
     l2cap_do_send+0x23f/0x3d0
     l2cap_chan_send+0xc06/0x2cc0
     l2cap_sock_sendmsg+0x201/0x2b0
     sock_sendmsg+0xdc/0x110
     sock_write_iter+0x20f/0x370
     do_iter_readv_writev+0x343/0x690
     do_iter_write+0x132/0x640
     vfs_writev+0x198/0x570
     do_writev+0x202/0x280
     do_syscall_64+0x38/0x90
     entry_SYSCALL_64_after_hwframe+0x44/0xae
    RSP: 002b:00007ffce8a099b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000014
    Code: 0f 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3
    0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 14 00 00 00 0f 05
    <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10
    RDX: 0000000000000001 RSI: 00007ffce8a099e0 RDI: 0000000000000015
    RAX: ffffffffffffffda RBX: 00007ffce8a099e0 RCX: 00007f788fc3cf77
    R10: 00007ffce8af7080 R11: 0000000000000246 R12: 000055e4ccf75580
    RBP: 0000000000000015 R08: 0000000000000002 R09: 0000000000000001
    </TASK>
    R13: 000055e4ccf754a0 R14: 000055e4ccf75cd0 R15: 000055e4ccf4a6b0

    Allocated by task 45:
        kasan_save_stack+0x1e/0x40
        __kasan_kmalloc+0x81/0xa0
        hci_chan_create+0x9a/0x2f0
        l2cap_conn_add.part.0+0x1a/0xdc0
        l2cap_connect_cfm+0x236/0x1000
        le_conn_complete_evt+0x15a7/0x1db0
        hci_le_conn_complete_evt+0x226/0x2c0
        hci_le_meta_evt+0x247/0x450
        hci_event_packet+0x61b/0xe90
        hci_rx_work+0x4d5/0xc50
        process_one_work+0x8fb/0x15a0
        worker_thread+0x576/0x1240
        kthread+0x29d/0x340
        ret_from_fork+0x1f/0x30

    Freed by task 45:
        kasan_save_stack+0x1e/0x40
        kasan_set_track+0x21/0x30
        kasan_set_free_info+0x20/0x30
        __kasan_slab_free+0xfb/0x130
        kfree+0xac/0x350
        hci_conn_cleanup+0x101/0x6a0
        hci_conn_del+0x27e/0x6c0
        hci_disconn_phylink_complete_evt+0xe0/0x120
        hci_event_packet+0x812/0xe90
        hci_rx_work+0x4d5/0xc50
        process_one_work+0x8fb/0x15a0
        worker_thread+0x576/0x1240
        kthread+0x29d/0x340
        ret_from_fork+0x1f/0x30

    The buggy address belongs to the object at ffff88800c0f0500
    The buggy address is located 24 bytes inside of
    which belongs to the cache kmalloc-128 of size 128
    The buggy address belongs to the page:
    128-byte region [ffff88800c0f0500, ffff88800c0f0580)
    flags: 0x100000000000200(slab|node=0|zone=1)
    page:00000000fe45cd86 refcount:1 mapcount:0
    mapping:0000000000000000 index:0x0 pfn:0xc0f0
    raw: 0000000000000000 0000000080100010 00000001ffffffff
    0000000000000000
    raw: 0100000000000200 ffffea00003a2c80 dead000000000004
    ffff8880078418c0
    page dumped because: kasan: bad access detected
    ffff88800c0f0400: 00 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc
    Memory state around the buggy address:
    >ffff88800c0f0500: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
    ffff88800c0f0480: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
    ffff88800c0f0580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
                                ^
    ==================================================================
    ffff88800c0f0600: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb

Reported-by: Sönke Huster <soenke.huster@eknoes.de>
Tested-by: Sönke Huster <soenke.huster@eknoes.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

MIPS: ingenic: correct unit node address

[ Upstream commit 8931ddd8d6a55fcefb20f44a38ba42bb746f0b62 ]

Unit node addresses should not have leading 0x:

  Warning (unit_address_format): /nemc@13410000/efuse@d0/eth-mac-addr@0x22: unit name should not have leading "0x"

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xtensa: fix DTC warning unit_address_format

[ Upstream commit e85d29ba4b24f68e7a78cb85c55e754362eeb2de ]

DTC issues the following warnings when building xtfpga device trees:

 /soc/flash@00000000/partition@0x0: unit name should not have leading "0x"
 /soc/flash@00000000/partition@0x6000000: unit name should not have leading "0x"
 /soc/flash@00000000/partition@0x6800000: unit name should not have leading "0x"
 /soc/flash@00000000/partition@0x7fe0000: unit name should not have leading "0x"

Drop leading 0x from flash partition unit names.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: dwc3: omap: fix "unbalanced disables for smps10_out1" on omap5evm

[ Upstream commit ac01df343e5a6c6bcead2ed421af1fde30f73e7e ]

Usually, the vbus_regulator (smps10 on omap5evm) boots up disabled.

Hence calling regulator_disable() indirectly through dwc3_omap_set_mailbox()
during probe leads to:

[   10.332764] WARNING: CPU: 0 PID: 1628 at drivers/regulator/core.c:2853 _regulator_disable+0x40/0x164
[   10.351919] unbalanced disables for smps10_out1
[   10.361298] Modules linked in: dwc3_omap(+) clk_twl6040 at24 gpio_twl6040 palmas_gpadc palmas_pwrbutton
industrialio snd_soc_omap_mcbsp(+) snd_soc_ti_sdma display_connector ti_tpd12s015 drm leds_gpio
drm_panel_orientation_quirks ip_tables x_tables ipv6 autofs4
[   10.387818] CPU: 0 PID: 1628 Comm: systemd-udevd Not tainted 5.17.0-rc1-letux-lpae+ #8139
[   10.405129] Hardware name: Generic OMAP5 (Flattened Device Tree)
[   10.411455]  unwind_backtrace from show_stack+0x10/0x14
[   10.416970]  show_stack from dump_stack_lvl+0x40/0x4c
[   10.422313]  dump_stack_lvl from __warn+0xb8/0x170
[   10.427377]  __warn from warn_slowpath_fmt+0x70/0x9c
[   10.432595]  warn_slowpath_fmt from _regulator_disable+0x40/0x164
[   10.439037]  _regulator_disable from regulator_disable+0x30/0x64
[   10.445382]  regulator_disable from dwc3_omap_set_mailbox+0x8c/0xf0 [dwc3_omap]
[   10.453116]  dwc3_omap_set_mailbox [dwc3_omap] from dwc3_omap_probe+0x2b8/0x394 [dwc3_omap]
[   10.467021]  dwc3_omap_probe [dwc3_omap] from platform_probe+0x58/0xa8
[   10.481762]  platform_probe from really_probe+0x168/0x2fc
[   10.481782]  really_probe from __driver_probe_device+0xc4/0xd8
[   10.481782]  __driver_probe_device from driver_probe_device+0x24/0xa4
[   10.503762]  driver_probe_device from __driver_attach+0xc4/0xd8
[   10.510018]  __driver_attach from bus_for_each_dev+0x64/0xa0
[   10.516001]  bus_for_each_dev from bus_add_driver+0x148/0x1a4
[   10.524880]  bus_add_driver from driver_register+0xb4/0xf8
[   10.530678]  driver_register from do_one_initcall+0x90/0x1c4
[   10.536661]  do_one_initcall from do_init_module+0x4c/0x200
[   10.536683]  do_init_module from load_module+0x13dc/0x1910
[   10.551159]  load_module from sys_finit_module+0xc8/0xd8
[   10.561319]  sys_finit_module from __sys_trace_return+0x0/0x18
[   10.561336] Exception stack(0xc344bfa8 to 0xc344bff0)
[   10.561341] bfa0:                   b6fb5778 b6fab8d8 00000007 b6ecfbb8 00000000 b6ed0398
[   10.561341] bfc0: b6fb5778 b6fab8d8 855c0500 0000017b 00020000 b6f9a3cc 00000000 b6fb5778
[   10.595500] bfe0: bede18f8 bede18e8 b6ec9aeb b6dda1c2
[   10.601345] ---[ end trace 0000000000000000 ]---

Fix this unnecessary warning by checking if the regulator is enabled.

Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Link: https://lore.kernel.org/r/af3b750dc2265d875deaabcf5f80098c9645da45.1646744616.git.hns@goldelico.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: sfp: add 2500base-X quirk for Lantech SFP module

[ Upstream commit 00eec9fe4f3b9588b4bfa8ef9dd0aae96407d5d7 ]

The Lantech 8330-262D-E module is 2500base-X capable, but it reports the
nominal bitrate as 2500MBd instead of 3125MBd. Add a quirk for the
module.

The following in an EEPROM dump of such a SFP with the serial number
redacted:

00: 03 04 07 00 00 00 01 20 40 0c 05 01 19 00 00 00    ???...? @????...
10: 1e 0f 00 00 4c 61 6e 74 65 63 68 20 20 20 20 20    ??..Lantech
20: 20 20 20 20 00 00 00 00 38 33 33 30 2d 32 36 32        ....8330-262
30: 44 2d 45 20 20 20 20 20 56 31 2e 30 03 52 00 cb    D-E     V1.0?R.?
40: 00 1a 00 00 46 43 XX XX XX XX XX XX XX XX XX XX    .?..FCXXXXXXXXXX
50: 20 20 20 20 32 32 30 32 31 34 20 20 68 b0 01 98        220214  h???
60: 45 58 54 52 45 4d 45 4c 59 20 43 4f 4d 50 41 54    EXTREMELY COMPAT
70: 49 42 4c 45 20 20 20 20 20 20 20 20 20 20 20 20    IBLE

Signed-off-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20220312205014.4154907-1-michael@walle.cc
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: limit altnames to 64k total

[ Upstream commit 155fb43b70b5fce341347a77d1af2765d1e8fbb8 ]

Property list (altname is a link "property") is wrapped
in a nlattr. nlattrs length is 16bit so practically
speaking the list of properties can't be longer than
that, otherwise user space would have to interpret
broken netlink messages.

Prevent the problem from occurring by checking the length
of the property list before adding new entries.

Reported-by: George Shuklin <george.shuklin@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: account alternate interface name memory

[ Upstream commit 5d26cff5bdbebdf98ba48217c078ff102536f134 ]

George reports that altnames can eat up kernel memory.
We should charge that memory appropriately.

Reported-by: George Shuklin <george.shuklin@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

can: isotp: set default value for N_As to 50 micro seconds

[ Upstream commit 530e0d46c61314c59ecfdb8d3bcb87edbc0f85d3 ]

The N_As value describes the time a CAN frame needs on the wire when
transmitted by the CAN controller. Even very short CAN FD frames need
arround 100 usecs (bitrate 1Mbit/s, data bitrate 8Mbit/s).

Having N_As to be zero (the former default) leads to 'no CAN frame
separation' when STmin is set to zero by the receiving node. This 'burst
mode' should not be enabled by default as it could potentially dump a high
number of CAN frames into the netdev queue from the soft hrtimer context.
This does not affect the system stability but is just not nice and
cooperative.

With this N_As/frame_txtime value the 'burst mode' is disabled by default.

As user space applications usually do not set the frame_txtime element
of struct can_isotp_options the new in-kernel default is very likely
overwritten with zero when the sockopt() CAN_ISOTP_OPTS is invoked.
To make sure that a N_As value of zero is only set intentional the
value '0' is now interpreted as 'do not change the current value'.
When a frame_txtime of zero is required for testing purposes this
CAN_ISOTP_FRAME_TXTIME_ZERO u32 value has to be set in frame_txtime.

Link: https://lore.kernel.org/all/20220309120416.83514-2-socketcan@hartkopp.net
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: libfc: Fix use after free in fc_exch_abts_resp()

[ Upstream commit 271add11994ba1a334859069367e04d2be2ebdd4 ]

fc_exch_release(ep) will decrease the ep's reference count. When the
reference count reaches zero, it is freed. But ep is still used in the
following code, which will lead to a use after free.

Return after the fc_exch_release() call to avoid use after free.

Link: https://lore.kernel.org/r/20220303015115.459778-1-niejianglei2021@163.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jianglei Nie <niejianglei2021@163.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/secvar: fix refcount leak in format_show()

[ Upstream commit d601fd24e6964967f115f036a840f4f28488f63f ]

Refcount leak will happen when format_show returns failure in multiple
cases. Unified management of of_node_put can fix this problem.

Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220302021959.10959-1-hbh25y@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

MIPS: fix fortify panic when copying asm exception handlers

[ Upstream commit d17b66417308996e7e64b270a3c7f3c1fbd4cfc8 ]

With KCFLAGS="-O3", I was able to trigger a fortify-source
memcpy() overflow panic on set_vi_srs_handler().
Although O3 level is not supported in the mainline, under some
conditions that may've happened with any optimization settings,
it's just a matter of inlining luck. The panic itself is correct,
more precisely, 50/50 false-positive and not at the same time.
From the one side, no real overflow happens. Exception handler
defined in asm just gets copied to some reserved places in the
memory.
But the reason behind is that C code refers to that exception
handler declares it as `char`, i.e. something of 1 byte length.
It's obvious that the asm function itself is way more than 1 byte,
so fortify logics thought we are going to past the symbol declared.
The standard way to refer to asm symbols from C code which is not
supposed to be called from C is to declare them as
`extern const u8[]`. This is fully correct from any point of view,
as any code itself is just a bunch of bytes (including 0 as it is
for syms like _stext/_etext/etc.), and the exact size is not known
at the moment of compilation.
Adjust the type of the except_vec_vi_*() and related variables.
Make set_handler() take `const` as a second argument to avoid
cast-away warnings and give a little more room for optimization.

Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: endpoint: Fix misused goto label

[ Upstream commit bf8d87c076f55b8b4dfdb6bc6c6b6dc0c2ccb487 ]

Fix a misused goto label jump since that can result in a memory leak.

Link: https://lore.kernel.org/r/17e7b9b9ee6.c6d9c6a02564.4545388417402742326@zohomail.com
Signed-off-by: Li Chen <lchen@ambarella.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bnxt_en: Eliminate unintended link toggle during FW reset

[ Upstream commit 7c492a2530c1f05441da541307c2534230dfd59b ]

If the flow control settings have been changed, a subsequent FW reset
may cause the ethernet link to toggle unnecessarily.  This link toggle
will increase the down time by a few seconds.

The problem is caused by bnxt_update_phy_setting() detecting a false
mismatch in the flow control settings between the stored software
settings and the current FW settings after the FW reset.  This mismatch
is caused by the AUTONEG bit added to link_info->req_flow_ctrl in an
inconsistent way in bnxt_set_pauseparam() in autoneg mode.  The AUTONEG
bit should not be added to link_info->req_flow_ctrl.

Reviewed-by: Colin Winegarden <colin.winegarden@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: use memset avoid memory leaks

[ Upstream commit d3715b2333e9a21692ba16ef8645eda584a9515d ]

Use memset to initialize structs to prevent memory leaks
in l2cap_ecred_connect

Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi (CGEL ZTE) <chi.minghao@zte.com.cn>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: Fix not checking for valid hdev on bt_dev_{info,warn,err,dbg}

[ Upstream commit 9b392e0e0b6d026da5a62bb79a08f32e27af858e ]

This fixes attemting to print hdev->name directly which causes them to
print an error:

kernel: read_version:367: (efault): sock 000000006a3008f2

Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tuntap: add sanity checks about msg_controllen in sendmsg

[ Upstream commit 74a335a07a17d131b9263bfdbdcb5e40673ca9ca ]

In patch [1], tun_msg_ctl was added to allow pass batched xdp buffers to
tun_sendmsg. Although we donot use msg_controllen in this path, we should
check msg_controllen to make sure the caller pass a valid msg_ctl.

[1]: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=fe8dd45bb7556246c6b76277b1ba4296c91c2505

Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Suggested-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Harold Huang <baymaxhuang@gmail.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20220303022441.383865-1-baymaxhuang@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

macvtap: advertise link netns via netlink

[ Upstream commit a02192151b7dbf855084c38dca380d77c7658353 ]

Assign rtnl_link_ops->get_link_net() callback so that IFLA_LINK_NETNSID is
added to rtnetlink messages. This fixes iproute2 which otherwise resolved
the link interface to an interface in the wrong namespace.

Test commands:

  ip netns add nst
  ip link add dummy0 type dummy
  ip link add link macvtap0 link dummy0 type macvtap
  ip link set macvtap0 netns nst
  ip -netns nst link show macvtap0

Before:

  10: macvtap0@gre0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 500
      link/ether 5e:8f:ae:1d:60:50 brd ff:ff:ff:ff:ff:ff

After:

  10: macvtap0@if2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 500
      link/ether 5e:8f:ae:1d:60:50 brd ff:ff:ff:ff:ff:ff link-netnsid 0

Reported-by: Leonardo Mörlein <freifunk@irrelefant.net>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Link: https://lore.kernel.org/r/20220228003240.1337426-1-sven@narfation.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mips: ralink: fix a refcount leak in ill_acc_of_setup()

[ Upstream commit 4a0a1436053b17e50b7c88858fb0824326641793 ]

of_node_put(np) needs to be called when pdev == NULL.

Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/smc: correct settings of RMB window update limit

[ Upstream commit 6bf536eb5c8ca011d1ff57b5c5f7c57ceac06a37 ]

rmbe_update_limit is used to limit announcing receive
window updating too frequently. RFC7609 request a minimal
increase in the window size of 10% of the receive buffer
space. But current implementation used:

  min_t(int, rmbe_size / 10, SOCK_MIN_SNDBUF / 2)

and SOCK_MIN_SNDBUF / 2 == 2304 Bytes, which is almost
always less then 10% of the receive buffer space.

This causes the receiver always sending CDC message to
update its consumer cursor when it consumes more then 2K
of data. And as a result, we may encounter something like
"TCP silly window syndrome" when sending 2.5~8K message.

This patch fixes this using max(rmbe_size / 10, SOCK_MIN_SNDBUF / 2).

With this patch and SMC autocorking enabled, qperf 2K/4K/8K
tcp_bw test shows 45%/75%/40% increase in throughput respectively.

Signed-off-by: Dust Li <dust.li@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: hisi_sas: Free irq vectors in order for v3 HW

[ Upstream commit 554fb72ee34f4732c7f694f56c3c6e67790352a0 ]

If the driver probe fails to request the channel IRQ or fatal IRQ, the
driver will free the IRQ vectors before freeing the IRQs in free_irq(),
and this will cause a kernel BUG like this:

------------[ cut here ]------------
kernel BUG at drivers/pci/msi.c:369!
Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
Call trace:
   free_msi_irqs+0x118/0x13c
   pci_disable_msi+0xfc/0x120
   pci_free_irq_vectors+0x24/0x3c
   hisi_sas_v3_probe+0x360/0x9d0 [hisi_sas_v3_hw]
   local_pci_probe+0x44/0xb0
   work_for_cpu_fn+0x20/0x34
   process_one_work+0x1d0/0x340
   worker_thread+0x2e0/0x460
   kthread+0x180/0x190
   ret_from_fork+0x10/0x20
---[ end trace b88990335b610c11 ]---

So we use devm_add_action() to control the order in which we free the
vectors.

Link: https://lore.kernel.org/r/1645703489-87194-4-git-send-email-john.garry@huawei.com
Signed-off-by: Qi Liu <liuqi115@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: aha152x: Fix aha152x_setup() __setup handler return value

[ Upstream commit cc8294ec4738d25e2bb2d71f7d82a9bf7f4a157b ]

__setup() handlers should return 1 if the command line option is handled
and 0 if not (or maybe never return 0; doing so just pollutes init's
environment with strings that are not init arguments/parameters).

Return 1 from aha152x_setup() to indicate that the boot option has been
handled.

Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru
Link: https://lore.kernel.org/r/20220223000623.5920-1-rdunlap@infradead.org
Cc: "Juergen E. Fischer" <fischer@norbit.de>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mt76: mt7615: Fix assigning negative values to unsigned variable

[ Upstream commit 9273ffcc9a11942bd586bb42584337ef3962b692 ]

Smatch reports the following:
drivers/net/wireless/mediatek/mt76/mt7615/mac.c:1865
mt7615_mac_adjust_sensitivity() warn: assigning (-110) to unsigned
variable 'def_th'
drivers/net/wireless/mediatek/mt76/mt7615/mac.c:1865
mt7615_mac_adjust_sensitivity() warn: assigning (-98) to unsigned
variable 'def_th'

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: pm8001: Fix memory leak in pm8001_chip_fw_flash_update_req()

[ Upstream commit f792a3629f4c4aa4c3703d66b43ce1edcc3ec09a ]

In pm8001_chip_fw_flash_update_build(), if
pm8001_chip_fw_flash_update_build() fails, the struct fw_control_ex
allocated must be freed.

Link: https://lore.kernel.org/r/20220220031810.738362-23-damien.lemoal@opensource.wdc.com
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: pm8001: Fix tag leaks on error

[ Upstream commit 4c8f04b1905cd4b776d0b720463c091545478ef7 ]

In pm8001_chip_set_dev_state_req(), pm8001_chip_fw_flash_update_req(),
pm80xx_chip_phy_ctl_req() and pm8001_chip_reg_dev_req() add missing calls
to pm8001_tag_free() to free the allocated tag when pm8001_mpi_build_cmd()
fails.

Similarly, in pm8001_exec_internal_task_abort(), if the chip ->task_abort
method fails, the tag allocated for the abort request task must be
freed. Add the missing call to pm8001_tag_free().

Link: https://lore.kernel.org/r/20220220031810.738362-22-damien.lemoal@opensource.wdc.com
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: pm8001: Fix task leak in pm8001_send_abort_all()

[ Upstream commit f90a74892f3acf0cdec5844e90fc8686ca13e7d7 ]

In pm8001_send_abort_all(), make sure to free the allocated sas task
if pm8001_tag_alloc() or pm8001_mpi_build_cmd() fail.

Link: https://lore.kernel.org/r/20220220031810.738362-21-damien.lemoal@opensource.wdc.com
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: pm8001: Fix pm8001_mpi_task_abort_resp()

[ Upstream commit 7e6b7e740addcea450041b5be8e42f0a4ceece0f ]

The call to pm8001_ccb_task_free() at the end of
pm8001_mpi_task_abort_resp() already frees the ccb tag. So when the device
NCQ_ABORT_ALL_FLAG is set, the tag should not be freed again.  Also change
the hardcoded 0xBFFFFFFF value to ~NCQ_ABORT_ALL_FLAG as it ought to be.

Link: https://lore.kernel.org/r/20220220031810.738362-19-damien.lemoal@opensource.wdc.com
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: pm8001: Fix pm80xx_pci_mem_copy() interface

[ Upstream commit 3762d8f6edcdb03994c919f9487fd6d336c06561 ]

The declaration of the local variable destination1 in pm80xx_pci_mem_copy()
as a pointer to a u32 results in the sparse warning:

warning: incorrect type in assignment (different base types)
    expected unsigned int [usertype]
    got restricted __le32 [usertype]

Furthermore, the destination" argument of pm80xx_pci_mem_copy() is wrongly
declared with the const attribute.

Fix both problems by changing the type of the "destination" argument to
"__le32 *" and use this argument directly inside the pm80xx_pci_mem_copy()
function, thus removing the need for the destination1 local variable.

Link: https://lore.kernel.org/r/20220220031810.738362-6-damien.lemoal@opensource.wdc.com
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdkfd: make CRAT table missing message informational only

[ Upstream commit 9dff13f9edf755a15f6507874185a3290c1ae8bb ]

The driver has a fallback so make the message informational
rather than a warning. The driver has a fallback if the
Component Resource Association Table (CRAT) is missing, so
make this informational now.

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1906
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dm: requeue IO if mapping table not yet available

[ Upstream commit fa247089de9936a46e290d4724cb5f0b845600f5 ]

Update both bio-based and request-based DM to requeue IO if the
mapping table not available.

This race of IO being submitted before the DM device ready is so
narrow, yet possible for initial table load given that the DM device's
request_queue is created prior, that it best to requeue IO to handle
this unlikely case.

Reported-by: Zhang Yi <yi.zhang@huawei.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dm ioctl: prevent potential spectre v1 gadget

[ Upstream commit cd9c88da171a62c4b0f1c70e50c75845969fbc18 ]

It appears like cmd could be a Spectre v1 gadget as it's supplied by a
user and used as an array index. Prevent the contents of kernel memory
from being leaked to userspace via speculative execution by using
array_index_nospec.

Signed-off-by: Jordy Zomer <jordy@pwning.systems>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ipv4: Invalidate neighbour for broadcast address upon address addition

[ Upstream commit 0c51e12e218f20b7d976158fdc18019627326f7a ]

In case user space sends a packet destined to a broadcast address when a
matching broadcast route is not configured, the kernel will create a
unicast neighbour entry that will never be resolved [1].

When the broadcast route is configured, the unicast neighbour entry will
not be invalidated and continue to linger, resulting in packets being
dropped.

Solve this by invalidating unresolved neighbour entries for broadcast
addresses after routes for these addresses are internally configured by
the kernel. This allows the kernel to create a broadcast neighbour entry
following the next route lookup.

Another possible solution that is more generic but also more complex is
to have the ARP code register a listener to the FIB notification chain
and invalidate matching neighbour entries upon the addition of broadcast
routes.

It is also possible to wave off the issue as a user space problem, but
it seems a bit excessive to expect user space to be that intimately
familiar with the inner workings of the FIB/neighbour kernel code.

[1] https://lore.kernel.org/netdev/55a04a8f-56f3-f73c-2aea-2195923f09d1@huawei.com/

Reported-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iwlwifi: mvm: Correctly set fragmented EBS

[ Upstream commit d8d4dd26b9e0469baf5017f0544d852fd4e3fb6d ]

Currently, fragmented EBS was set for a channel only if the 'hb_type'
was set to fragmented or balanced scan. However, 'hb_type' is set only
in case of CDB, and thus fragmented EBS is never set for a channel for
non-CDB devices. Fix it.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220204122220.a6165ac9b9d5.I654eafa62fd647030ae6d4f07f32c96c3171decb@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

power: supply: axp288-charger: Set Vhold to 4.4V

[ Upstream commit 5ac121b81b4051e7fc83d5b3456a5e499d5bd147 ]

The AXP288's recommended and factory default Vhold value (minimum
input voltage below which the input current draw will be reduced)
is 4.4V. This lines up with other charger IC's such as the TI
bq2419x/bq2429x series which use 4.36V or 4.44V.

For some reason some BIOS-es initialize Vhold to 4.6V or even 4.7V
which combined with the typical voltage drop over typically low
wire gauge micro-USB cables leads to the input-current getting
capped below 1A (with a 2A capable dedicated charger) based on Vhold.

This leads to slow charging, or even to the device slowly discharging
if the device is in heavy use.

As the Linux AXP288 drivers use the builtin BC1.2 charger detection
and send the input-current-limit according to the detected charger
there really is no reason not to use the recommended 4.4V Vhold.

Set Vhold to 4.4V to fix the slow charging issue on various devices.

There is one exception, the special-case of the HP X2 2-in-1s which
combine this BC1.2 capable PMIC with a Type-C port and a 5V/3A factory
provided charger with a Type-C plug which does not do BC1.2. These
have their input-current-limit hardcoded to 3A (like under Windows)
and use a higher Vhold on purpose to limit the current when used
with other chargers. To avoid touching Vhold on these HP X2 laptops
the code setting Vhold is added to an else branch of the if checking
for these models.

Note this also fixes the sofar unused VBUS_ISPOUT_VHOLD_SET_MASK
define, which was wrong.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: pciehp: Add Qualcomm quirk for Command Completed erratum

[ Upstream commit 9f72d4757cbe4d1ed669192f6d23817c9e437c4b ]

The Qualcomm PCI bridge device (Device ID 0x0110) found in chipsets such as
SM8450 does not set the Command Completed bit unless writes to the Slot
Command register change "Control" bits.

This results in timeouts like below:

  pcieport 0001:00:00.0: pciehp: Timeout on hotplug command 0x03c0 (issued 2020 msec ago)

Add the device to the Command Completed quirk to mark commands "completed"
immediately unless they change the "Control" bits.

Link: https://lore.kernel.org/r/20220210145003.135907-1-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tcp: Don't acquire inet_listen_hashbucket::lock with disabled BH.

[ Upstream commit 4f9bf2a2f5aacf988e6d5e56b961ba45c5a25248 ]

Commit
   9652dc2eb9e40 ("tcp: relax listening_hash operations")

removed the need to disable bottom half while acquiring
listening_hash.lock. There are still two callers left which disable
bottom half before the lock is acquired.

On PREEMPT_RT the softirqs are preemptible and local_bh_disable() acts
as a lock to ensure that resources, that are protected by disabling
bottom halves, remain protected.
This leads to a circular locking dependency if the lock acquired with
disabled bottom halves is also acquired with enabled bottom halves
followed by disabling bottom halves. This is the reverse locking order.
It has been observed with inet_listen_hashbucket::lock:

local_bh_disable() + spin_lock(&ilb->lock):
  inet_listen()
    inet_csk_listen_start()
      sk->sk_prot->hash() := inet_hash()
local_bh_disable()
__inet_hash()
  spin_lock(&ilb->lock);
    acquire(&ilb->lock);

Reverse order: spin_lock(&ilb2->lock) + local_bh_disable():
  tcp_seq_next()
    listening_get_next()
      spin_lock(&ilb2->lock);
acquire(&ilb2->lock);

  tcp4_seq_show()
    get_tcp4_sock()
      sock_i_ino()
read_lock_bh(&sk->sk_callback_lock);
  acquire(softirq_ctrl) // <---- whoops
  acquire(&sk->sk_callback_lock)

Drop local_bh_disable() around __inet_hash() which acquires
listening_hash->lock. Split inet_unhash() and acquire the
listen_hashbucket lock without disabling bottom halves; the inet_ehash
lock with disabled bottom halves.

Reported-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lkml.kernel.org/r/12d6f9879a97cd56c09fb53dee343cbb14f7f1f7.camel@gmx.de
Link: https://lkml.kernel.org/r/X9CheYjuXWc75Spa@hirez.programming.kicks-ass.net
Link: https://lore.kernel.org/r/YgQOebeZ10eNx1W6@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: endpoint: Fix alignment fault error in copy tests

[ Upstream commit 829cc0e2ea2d61fb6c54bc3f8a17f86c56e11864 ]

The copy test uses the memcpy() to copy data between IO memory spaces.
This can trigger an alignment fault error (pasted the error logs below)
because memcpy() may use unaligned accesses on a mapped memory that is
just IO, which does not support unaligned memory accesses.

Fix it by using the correct memcpy API to copy from/to IO memory.

Alignment fault error logs:
   Unable to handle kernel paging request at virtual address ffff8000101cd3c1
   Mem abort info:
     ESR = 0x96000021
     EC = 0x25: DABT (current EL), IL = 32 bits
     SET = 0, FnV = 0
     EA = 0, S1PTW = 0
     FSC = 0x21: alignment fault
   Data abort info:
     ISV = 0, ISS = 0x00000021
     CM = 0, WnR = 0
   swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000081773000
   [ffff8000101cd3c1] pgd=1000000082410003, p4d=1000000082410003, pud=1000000082411003, pmd=1000000082412003, pte=0068004000001f13
   Internal error: Oops: 96000021 [#1] PREEMPT SMP
   Modules linked in:
   CPU: 0 PID: 6 Comm: kworker/0:0H Not tainted 5.15.0-rc1-next-20210914-dirty #2
   Hardware name: LS1012A RDB Board (DT)
   Workqueue: kpcitest pci_epf_test_cmd_handler
   pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
   pc : __memcpy+0x168/0x230
   lr : pci_epf_test_cmd_handler+0x6f0/0xa68
   sp : ffff80001003bce0
   x29: ffff80001003bce0 x28: ffff800010135000 x27: ffff8000101e5000
   x26: ffff8000101cd000 x25: ffff6cda941cf6c8 x24: 0000000000000000
   x23: ffff6cda863f2000 x22: ffff6cda9096c800 x21: ffff800010135000
   x20: ffff6cda941cf680 x19: ffffaf39fd999000 x18: 0000000000000000
   x17: 0000000000000000 x16: 0000000000000000 x15: ffffaf39fd2b6000
   x14: 0000000000000000 x13: 15f5c8fa2f984d57 x12: 604d132b60275454
   x11: 065cee5e5fb428b6 x10: aae662eb17d0cf3e x9 : 1d97c9a1b4ddef37
   x8 : 7541b65edebf928c x7 : e71937c4fc595de0 x6 : b8a0e09562430d1c
   x5 : ffff8000101e5401 x4 : ffff8000101cd401 x3 : ffff8000101e5380
   x2 : fffffffffffffff1 x1 : ffff8000101cd3c0 x0 : ffff8000101e5000
   Call trace:
    __memcpy+0x168/0x230
    process_one_work+0x1ec/0x370
    worker_thread+0x44/0x478
    kthread+0x154/0x160
    ret_from_fork+0x10/0x20
   Code: a984346c a9c4342c f1010042 54fffee8 (a97c3c8e)
   ---[ end trace 568c28c7b6336335 ]---

Link: https://lore.kernel.org/r/20211217094708.28678-1-Zhiqiang.Hou@nxp.com
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: ehci: add pci device support for Aspeed platforms

[ Upstream commit c3c9cee592828528fd228b01d312c7526c584a42 ]

Enable Aspeed quirks in commit 7f2d73788d90 ("usb: ehci:
handshake CMD_RUN instead of STS_HALT") to support Aspeed
ehci-pci device.

Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Neal Liu <neal_liu@aspeedtech.com>
Link: https://lore.kernel.org/r/20220208101657.76459-1-neal_liu@aspeedtech.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/arm-smmu-v3: fix event handling soft lockup

[ Upstream commit 30de2b541af98179780054836b48825fcfba4408 ]

During event processing, events are read from the event queue one
by one until the queue is empty.If the master device continuously
requests address access at the same time and the SMMU generates
events, the cyclic processing of the event takes a long time and
softlockup warnings may be reported.

arm-smmu-v3 arm-smmu-v3.34.auto: event 0x0a received:
arm-smmu-v3 arm-smmu-v3.34.auto:  0x00007f220000280a
arm-smmu-v3 arm-smmu-v3.34.auto:  0x000010000000007e
arm-smmu-v3 arm-smmu-v3.34.auto:  0x00000000034e8670
watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [irq/268-arm-smm:247]
Call trace:
 _dev_info+0x7c/0xa0
 arm_smmu_evtq_thread+0x1c0/0x230
 irq_thread_fn+0x30/0x80
 irq_thread+0x128/0x210
 kthread+0x134/0x138
 ret_from_fork+0x10/0x1c
Kernel panic - not syncing: softlockup: hung tasks

Fix this by calling cond_resched() after the event information is
printed.

Signed-off-by: Zhou Guanghui <zhouguanghui1@huawei.com>
Link: https://lore.kernel.org/r/20220119070754.26528-1-zhouguanghui1@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: aardvark: Fix support for MSI interrupts

[ Upstream commit b0b0b8b897f8e12b2368e868bd7cdc5742d5c5a9 ]

Aardvark hardware supports Multi-MSI and MSI_FLAG_MULTI_PCI_MSI is already
set for the MSI chip. But when allocating MSI interrupt numbers for
Multi-MSI, the numbers need to be properly aligned, otherwise endpoint
devices send MSI interrupt with incorrect numbers.

Fix this issue by using function bitmap_find_free_region() instead of
bitmap_find_next_zero_area().

To ensure that aligned MSI interrupt numbers are used by endpoint devices,
we cannot use Linux virtual irq numbers (as they are random and not
properly aligned). Instead we need to use the aligned hwirq numbers.

This change fixes receiving MSI interrupts on Armada 3720 boards and
allows using NVMe disks which use Multi-MSI feature with 3 interrupts.

Without this NVMe disks freeze booting as linux nvme-core.c is waiting
60s for an interrupt.

Link: https://lore.kernel.org/r/20220110015018.26359-4-kabel@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: Fix recursive locking warning

[ Upstream commit 447c7997b62a5115ba4da846dcdee4fc12298a6a ]

Noticed the below warning while running a pytorch workload on vega10
GPUs. Change to trylock to avoid conflicts with already held reservation
locks.

[  +0.000003] WARNING: possible recursive locking detected
[  +0.000003] 5.13.0-kfd-rajneesh #1030 Not tainted
[  +0.000004] --------------------------------------------
[  +0.000002] python/4822 is trying to acquire lock:
[  +0.000004] ffff932cd9a259f8 (reservation_ww_class_mutex){+.+.}-{3:3},
at: amdgpu_bo_release_notify+0xc4/0x160 [amdgpu]
[  +0.000203]
              but task is already holding lock:
[  +0.000003] ffff932cbb7181f8 (reservation_ww_class_mutex){+.+.}-{3:3},
at: ttm_eu_reserve_buffers+0x270/0x470 [ttm]
[  +0.000017]
              other info that might help us debug this:
[  +0.000002]  Possible unsafe locking scenario:

[  +0.000003]        CPU0
[  +0.000002]        ----
[  +0.000002]   lock(reservation_ww_class_mutex);
[  +0.000004]   lock(reservation_ww_class_mutex);
[  +0.000003]
               *** DEADLOCK ***

[  +0.000002]  May be due to missing lock nesting notation

[  +0.000003] 7 locks held by python/4822:
[  +0.000003]  #0: ffff932c4ac028d0 (&process->mutex){+.+.}-{3:3}, at:
kfd_ioctl_map_memory_to_gpu+0x10b/0x320 [amdgpu]
[  +0.000232]  #1: ffff932c55e830a8 (&info->lock#2){+.+.}-{3:3}, at:
amdgpu_amdkfd_gpuvm_map_memory_to_gpu+0x64/0xf60 [amdgpu]
[  +0.000241]  #2: ffff932cc45b5e68 (&(*mem)->lock){+.+.}-{3:3}, at:
amdgpu_amdkfd_gpuvm_map_memory_to_gpu+0xdf/0xf60 [amdgpu]
[  +0.000236]  #3: ffffb2b35606fd28
(reservation_ww_class_acquire){+.+.}-{0:0}, at:
amdgpu_amdkfd_gpuvm_map_memory_to_gpu+0x232/0xf60 [amdgpu]
[  +0.000235]  #4: ffff932cbb7181f8
(reservation_ww_class_mutex){+.+.}-{3:3}, at:
ttm_eu_reserve_buffers+0x270/0x470 [ttm]
[  +0.000015]  #5: ffffffffc045f700 (*(sspp++)){....}-{0:0}, at:
drm_dev_enter+0x5/0xa0 [drm]
[  +0.000038]  #6: ffff932c52da7078 (&vm->eviction_lock){+.+.}-{3:3},
at: amdgpu_vm_bo_update_mapping+0xd5/0x4f0 [amdgpu]
[  +0.000195]
              stack backtrace:
[  +0.000003] CPU: 11 PID: 4822 Comm: python Not tainted
5.13.0-kfd-rajneesh #1030
[  +0.000005] Hardware name: GIGABYTE MZ01-CE0-00/MZ01-CE0-00, BIOS F02
08/29/2018
[  +0.000003] Call Trace:
[  +0.000003]  dump_stack+0x6d/0x89
[  +0.000010]  __lock_acquire+0xb93/0x1a90
[  +0.000009]  lock_acquire+0x25d/0x2d0
[  +0.000005]  ? amdgpu_bo_release_notify+0xc4/0x160 [amdgpu]
[  +0.000184]  ? lock_is_held_type+0xa2/0x110
[  +0.000006]  ? amdgpu_bo_release_notify+0xc4/0x160 [amdgpu]
[  +0.000184]  __ww_mutex_lock.constprop.17+0xca/0x1060
[  +0.000007]  ? amdgpu_bo_release_notify+0xc4/0x160 [amdgpu]
[  +0.000183]  ? lock_release+0x13f/0x270
[  +0.000005]  ? lock_is_held_type+0xa2/0x110
[  +0.000006]  ? amdgpu_bo_release_notify+0xc4/0x160 [amdgpu]
[  +0.000183]  amdgpu_bo_release_notify+0xc4/0x160 [amdgpu]
[  +0.000185]  ttm_bo_release+0x4c6/0x580 [ttm]
[  +0.000010]  amdgpu_bo_unref+0x1a/0x30 [amdgpu]
[  +0.000183]  amdgpu_vm_free_table+0x76/0xa0 [amdgpu]
[  +0.000189]  amdgpu_vm_free_pts+0xb8/0xf0 [amdgpu]
[  +0.000189]  amdgpu_vm_update_ptes+0x411/0x770 [amdgpu]
[  +0.000191]  amdgpu_vm_bo_update_mapping+0x324/0x4f0 [amdgpu]
[  +0.000191]  amdgpu_vm_bo_update+0x251/0x610 [amdgpu]
[  +0.000191]  update_gpuvm_pte+0xcc/0x290 [amdgpu]
[  +0.000229]  ? amdgpu_vm_bo_map+0xd7/0x130 [amdgpu]
[  +0.000190]  amdgpu_amdkfd_gpuvm_map_memory_to_gpu+0x912/0xf60
[amdgpu]
[  +0.000234]  kfd_ioctl_map_memory_to_gpu+0x182/0x320 [amdgpu]
[  +0.000218]  kfd_ioctl+0x2b9/0x600 [amdgpu]
[  +0.000216]  ? kfd_ioctl_unmap_memory_from_gpu+0x270/0x270 [amdgpu]
[  +0.000216]  ? lock_release+0x13f/0x270
[  +0.000006]  ? __fget_files+0x107/0x1e0
[  +0.000007]  __x64_sys_ioctl+0x8b/0xd0
[  +0.000007]  do_syscall_64+0x36/0x70
[  +0.000004]  entry_SYSCALL_64_after_hwframe+0x44/0xae
[  +0.000007] RIP: 0033:0x7fbff90a7317
[  +0.000004] Code: b3 66 90 48 8b 05 71 4b 2d 00 64 c7 00 26 00 00 00
48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f
05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 41 4b 2d 00 f7 d8 64 89 01 48
[  +0.000005] RSP: 002b:00007fbe301fe648 EFLAGS: 00000246 ORIG_RAX:
0000000000000010
[  +0.000006] RAX: ffffffffffffffda RBX: 00007fbcc402d820 RCX:
00007fbff90a7317
[  +0.000003] RDX: 00007fbe301fe690 RSI: 00000000c0184b18 RDI:
0000000000000004
[  +0.000003] RBP: 00007fbe301fe690 R08: 0000000000000000 R09:
00007fbcc402d880
[  +0.000003] R10: 0000000002001000 R11: 0000000000000246 R12:
00000000c0184b18
[  +0.000003] R13: 0000000000000004 R14: 00007fbf689593a0 R15:
00007fbcc402d820

Cc: Christian König <christian.koenig@amd.com>
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Alex Deucher <Alexander.Deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc: Set crashkernel offset to mid of RMA region

[ Upstream commit 7c5ed82b800d8615cdda00729e7b62e5899f0b13 ]

On large config LPARs (having 192 and more cores), Linux fails to boot
due to insufficient memory in the first memblock. It is due to the
memory reservation for the crash kernel which starts at 128MB offset of
the first memblock. This memory reservation for the crash kernel doesn't
leave enough space in the first memblock to accommodate other essential
system resources.

The crash kernel start address was set to 128MB offset by default to
ensure that the crash kernel get some memory below the RMA region which
is used to be of size 256MB. But given that the RMA region size can be
512MB or more, setting the crash kernel offset to mid of RMA size will
leave enough space for the kernel to allocate memory for other system
resources.

Since the above crash kernel offset change is only applicable to the LPAR
platform, the LPAR feature detection is pushed before the crash kernel
reservation. The rest of LPAR specific initialization will still
be done during pseries_probe_fw_features as usual.

This patch is dependent on changes to paca allocation for boot CPU. It
expect boot CPU to discover 1T segment support which is introduced by
the patch posted here:
https://lists.ozlabs.org/pipermail/linuxppc-dev/2022-January/239175.html

Reported-by: Abdul haleem <abdhalee@linux.vnet.ibm.com>
Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220204085601.107257-1-sourabhjain@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

ipv6: make mc_forwarding atomic

[ Upstream commit 145c7a793838add5e004e7d49a67654dc7eba147 ]

This fixes minor data-races in ip6_mc_input() and
batadv_mcast_mla_rtr_flags_softif_get_ipv6()

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

libbpf: Fix build issue with llvm-readelf

[ Upstream commit 0908a66ad1124c1634c33847ac662106f7f2c198 ]

There are cases where clang compiler is packaged in a way
readelf is a symbolic link to llvm-readelf. In such cases,
llvm-readelf will be used instead of default binutils readelf,
and the following error will appear during libbpf build:

#  Warning: Num of global symbols in
#   /home/yhs/work/bpf-next/tools/testing/selftests/bpf/tools/build/libbpf/sharedobjs/libbpf-in.o (367)
#   does NOT match with num of versioned symbols in
#   /home/yhs/work/bpf-next/tools/testing/selftests/bpf/tools/build/libbpf/libbpf.so libbpf.map (383).
#   Please make sure all LIBBPF_API symbols are versioned in libbpf.map.
#  --- /home/yhs/work/bpf-next/tools/testing/selftests/bpf/tools/build/libbpf/libbpf_global_syms.tmp ...
#  +++ /home/yhs/work/bpf-next/tools/testing/selftests/bpf/tools/build/libbpf/libbpf_versioned_syms.tmp ...
#  @@ -324,6 +324,22 @@
#   btf__str_by_offset
#   btf__type_by_id
#   btf__type_cnt
#  +LIBBPF_0.0.1
#  +LIBBPF_0.0.2
#  +LIBBPF_0.0.3
#  +LIBBPF_0.0.4
#  +LIBBPF_0.0.5
#  +LIBBPF_0.0.6
#  +LIBBPF_0.0.7
#  +LIBBPF_0.0.8
#  +LIBBPF_0.0.9
#  +LIBBPF_0.1.0
#  +LIBBPF_0.2.0
#  +LIBBPF_0.3.0
#  +LIBBPF_0.4.0
#  +LIBBPF_0.5.0
#  +LIBBPF_0.6.0
#  +LIBBPF_0.7.0
#   libbpf_attach_type_by_name
#   libbpf_find_kernel_btf
#   libbpf_find_vmlinux_btf_id
#  make[2]: *** [Makefile:184: check_abi] Error 1
#  make[1]: *** [Makefile:140: all] Error 2

The above failure is due to different printouts for some ABS
versioned symbols. For example, with the same libbpf.so,
  $ /bin/readelf --dyn-syms --wide tools/lib/bpf/libbpf.so | grep "LIBBPF" | grep ABS
     134: 0000000000000000     0 OBJECT  GLOBAL DEFAULT  ABS LIBBPF_0.5.0
     202: 0000000000000000     0 OBJECT  GLOBAL DEFAULT  ABS LIBBPF_0.6.0
     ...
  $ /opt/llvm/bin/readelf --dyn-syms --wide tools/lib/bpf/libbpf.so | grep "LIBBPF" | grep ABS
     134: 0000000000000000     0 OBJECT  GLOBAL DEFAULT   ABS LIBBPF_0.5.0@@LIBBPF_0.5.0
     202: 0000000000000000     0 OBJECT  GLOBAL DEFAULT   ABS LIBBPF_0.6.0@@LIBBPF_0.6.0
     ...
The binutils readelf doesn't print out the symbol LIBBPF_* version and llvm-readelf does.
Such a difference caused libbpf build failure with llvm-readelf.

The proposed fix filters out all ABS symbols as they are not part of the comparison.
This works for both binutils readelf and llvm-readelf.

Reported-by: Delyan Kratunov <delyank@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220204214355.502108-1-yhs@fb.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cfg80211: don't add non transmitted BSS to 6GHz scanned channels

[ Upstream commit 5666ee154f4696c011dfa8544aaf5591b6b87515 ]

When adding 6GHz channels to scan request based on reported
co-located APs, don't add channels that have only APs with
"non-transmitted" BSSes if they only match the wildcard SSID since
they will be found by probing the "transmitted" BSS.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220202104617.f6ddf099f934.I231e55885d3644f292d00dfe0f42653269f2559e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mt76: dma: initialize skip_unmap in mt76_dma_rx_fill

[ Upstream commit 577298ec55dfc8b9aece54520f0258c3f93a6573 ]

Even if it is only a false-positive since skip_buf0/skip_buf1 are only
used in mt76_dma_tx_cleanup_idx routine, initialize skip_unmap in
mt76_dma_rx_fill in order to fix the following UBSAN report:

[   13.924906] UBSAN: invalid-load in linux-5.15.0/drivers/net/wireless/mediatek/mt76/dma.c:162:13
[   13.924909] load of value 225 is not a valid value for type '_Bool'
[   13.924912] CPU: 9 PID: 672 Comm: systemd-udevd Not tainted 5.15.0-18-generic #18-Ubuntu
[   13.924914] Hardware name: LENOVO 21A0000CMX/21A0000CMX, BIOS R1MET43W (1.13 ) 11/05/2021
[   13.924915] Call Trace:
[   13.924917]  <TASK>
[   13.924920]  show_stack+0x52/0x58
[   13.924925]  dump_stack_lvl+0x4a/0x5f
[   13.924931]  dump_stack+0x10/0x12
[   13.924932]  ubsan_epilogue+0x9/0x45
[   13.924934]  __ubsan_handle_load_invalid_value.cold+0x44/0x49
[   13.924935]  ? __iommu_dma_map+0x84/0xf0
[   13.924939]  mt76_dma_add_buf.constprop.0.cold+0x23/0x85 [mt76]
[   13.924949]  mt76_dma_rx_fill.isra.0+0x102/0x1f0 [mt76]
[   13.924954]  mt76_dma_init+0xc9/0x150 [mt76]
[   13.924959]  ? mt7921_dma_enable+0x110/0x110 [mt7921e]
[   13.924966]  mt7921_dma_init+0x1e3/0x260 [mt7921e]
[   13.924970]  mt7921_register_device+0x29d/0x510 [mt7921e]
[   13.924975]  mt7921_pci_probe.part.0+0x17f/0x1b0 [mt7921e]
[   13.924980]  mt7921_pci_probe+0x43/0x60 [mt7921e]
[   13.924984]  local_pci_probe+0x4b/0x90
[   13.924987]  pci_device_probe+0x115/0x1f0
[   13.924989]  really_probe+0x21e/0x420
[   13.924992]  __driver_probe_device+0x115/0x190
[   13.924994]  driver_probe_device+0x23/0xc0
[   13.924996]  __driver_attach+0xbd/0x1d0
[   13.924998]  ? __device_attach_driver+0x110/0x110
[   13.924999]  bus_for_each_dev+0x7e/0xc0
[   13.925001]  driver_attach+0x1e/0x20
[   13.925003]  bus_add_driver+0x135/0x200
[   13.925005]  driver_register+0x95/0xf0
[   13.925008]  ? 0xffffffffc0766000
[   13.925010]  __pci_register_driver+0x68/0x70
[   13.925011]  mt7921_pci_driver_init+0x23/0x1000 [mt7921e]
[   13.925015]  do_one_initcall+0x48/0x1d0
[   13.925019]  ? kmem_cache_alloc_trace+0x19e/0x2e0
[   13.925022]  do_init_module+0x62/0x280
[   13.925025]  load_module+0xac9/0xbb0
[   13.925027]  __do_sys_finit_module+0xbf/0x120
[   13.925029]  __x64_sys_finit_module+0x18/0x20
[   13.925030]  do_syscall_64+0x5c/0xc0
[   13.925033]  ? do_syscall_64+0x69/0xc0
[   13.925034]  ? sysvec_reschedule_ipi+0x78/0xe0
[   13.925036]  ? asm_sysvec_reschedule_ipi+0xa/0x20
[   13.925039]  entry_SYSCALL_64_after_hwframe+0x44/0xae
[   13.925040] RIP: 0033:0x7fbf2b90f94d
[   13.925045] RSP: 002b:00007ffe2ec7e5d8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
[   13.925047] RAX: ffffffffffffffda RBX: 000056106b0634e0 RCX: 00007fbf2b90f94d
[   13.925048] RDX: 0000000000000000 RSI: 00007fbf2baa3441 RDI: 0000000000000013
[   13.925049] RBP: 0000000000020000 R08: 0000000000000000 R09: 0000000000000002
[   13.925050] R10: 0000000000000013 R11: 0000000000000246 R12: 00007fbf2baa3441
[   13.925051] R13: 000056106b062620 R14: 000056106b0610c0 R15: 000056106b0640d0
[   13.925053]  </TASK>

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>

power: supply: axp20x_battery: properly report current when discharging

[ Upstream commit d4f408cdcd26921c1268cb8dcbe8ffb6faf837f3 ]

As stated in [1], negative current values are used for discharging
batteries.

AXP PMICs internally have two different ADC channels for shunt current
measurement: one used during charging and one during discharging.
The values reported by these ADCs are unsigned.
While the driver properly selects ADC channel to get the data from,
it doesn't apply negative sign when reporting discharging current.

[1] Documentation/ABI/testing/sysfs-class-power

Signed-off-by: Evgeny Boger <boger@wirenboard.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: bfa: Replace snprintf() with sysfs_emit()

[ Upstream commit 2245ea91fd3a04cafbe2f54911432a8657528c3b ]

coccinelle report:
./drivers/scsi/bfa/bfad_attr.c:908:8-16:
WARNING: use scnprintf or sprintf
./drivers/scsi/bfa/bfad_attr.c:860:8-16:
WARNING: use scnprintf or sprintf
./drivers/scsi/bfa/bfad_attr.c:888:8-16:
WARNING: use scnprintf or sprintf
./drivers/scsi/bfa/bfad_attr.c:853:8-16:
WARNING: use scnprintf or sprintf
./drivers/scsi/bfa/bfad_attr.c:808:8-16:
WARNING: use scnprintf or sprintf
./drivers/scsi/bfa/bfad_attr.c:728:8-16:
WARNING: use scnprintf or sprintf
./drivers/scsi/bfa/bfad_attr.c:822:8-16:
WARNING: use scnprintf or sprintf
./drivers/scsi/bfa/bfad_attr.c:927:9-17:
WARNING: use scnprintf or sprintf
./drivers/scsi/bfa/bfad_attr.c:900:8-16:
WARNING: use scnprintf or sprintf
./drivers/scsi/bfa/bfad_attr.c:874:8-16:
WARNING: use scnprintf or sprintf
./drivers/scsi/bfa/bfad_attr.c:714:8-16:
WARNING: use scnprintf or sprintf
./drivers/scsi/bfa/bfad_attr.c:839:8-16:
WARNING: use scnprintf or sprintf

Use sysfs_emit() instead of scnprintf() or sprintf().

Link: https://lore.kernel.org/r/def83ff75faec64ba592b867a8499b1367bae303.1643181468.git.yang.guang5@zte.com.cn
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Yang Guang <yang.guang5@zte.com.cn>
Signed-off-by: David Yang <davidcomponentone@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: mvsas: Replace snprintf() with sysfs_emit()

[ Upstream commit 0ad3867b0f13e45cfee5a1298bfd40eef096116c ]

coccinelle report:
./drivers/scsi/mvsas/mv_init.c:699:8-16:
WARNING: use scnprintf or sprintf
./drivers/scsi/mvsas/mv_init.c:747:8-16:
WARNING: use scnprintf or sprintf

Use sysfs_emit() instead of scnprintf() or sprintf().

Link: https://lore.kernel.org/r/c1711f7cf251730a8ceb5bdfc313bf85662b3395.1643182948.git.yang.guang5@zte.com.cn
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Yang Guang <yang.guang5@zte.com.cn>
Signed-off-by: David Yang <davidcomponentone@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: Make dst_port field in struct bpf_sock 16-bit wide

[ Upstream commit 4421a582718ab81608d8486734c18083b822390d ]

Menglong Dong reports that the documentation for the dst_port field in
struct bpf_sock is inaccurate and confusing. From the BPF program PoV, the
field is a zero-padded 16-bit integer in network byte order. The value
appears to the BPF user as if laid out in memory as so:

  offsetof(struct bpf_sock, dst_port) + 0  <port MSB>
                                      + 8  <port LSB>
                                      +16  0x00
                                      +24  0x00

32-, 16-, and 8-bit wide loads from the field are all allowed, but only if
the offset into the field is 0.

32-bit wide loads from dst_port are especially confusing. The loaded value,
after converting to host byte order with bpf_ntohl(dst_port), contains the
port number in the upper 16-bits.

Remove the confusion by splitting the field into two 16-bit fields. For
backward compatibility, allow 32-bit wide loads from offsetof(struct
bpf_sock, dst_port).

While at it, allow loads 8-bit loads at offset [0] and [1] from dst_port.

Reported-by: Menglong Dong <imagedong@tencent.com>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/r/20220130115518.213259-2-jakub@cloudflare.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ath11k: mhi: use mhi_sync_power_up()

[ Upstream commit 3df6d74aedfdca919cca475d15dfdbc8b05c9e5d ]

If amss.bin was missing ath11k would crash during 'rmmod ath11k_pci'. The
reason for that was that we were using mhi_async_power_up() which does not
check any errors. But mhi_sync_power_up() on the other hand does check for
errors so let's use that to fix the crash.

I was not able to find a reason why an async version was used.
ath11k_mhi_start() (which enables state ATH11K_MHI_POWER_ON) is called from
ath11k_hif_power_up(), which can sleep. So sync version should be safe to use
here.

[  145.569731] general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC KASAN PTI
[  145.569789] KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
[  145.569843] CPU: 2 PID: 1628 Comm: rmmod Kdump: loaded Tainted: G        W         5.16.0-wt-ath+ #567
[  145.569898] Hardware name: Intel(R) Client Systems NUC8i7HVK/NUC8i7HVB, BIOS HNKBLi70.86A.0067.2021.0528.1339 05/28/2021
[  145.569956] RIP: 0010:ath11k_hal_srng_access_begin+0xb5/0x2b0 [ath11k]
[  145.570028] Code: df 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 ec 01 00 00 48 8b ab a8 00 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 ea 48 c1 ea 03 <0f> b6 14 02 48 89 e8 83 e0 07 83 c0 03 45 85 ed 75 48 38 d0 7c 08
[  145.570089] RSP: 0018:ffffc900025d7ac0 EFLAGS: 00010246
[  145.570144] RAX: dffffc0000000000 RBX: ffff88814fca2dd8 RCX: 1ffffffff50cb455
[  145.570196] RDX: 0000000000000000 RSI: ffff88814fca2dd8 RDI: ffff88814fca2e80
[  145.570252] RBP: 0000000000000000 R08: 0000000000000000 R09: ffffffffa8659497
[  145.570329] R10: fffffbfff50cb292 R11: 0000000000000001 R12: ffff88814fca0000
[  145.570410] R13: 0000000000000000 R14: ffff88814fca2798 R15: ffff88814fca2dd8
[  145.570465] FS:  00007fa399988540(0000) GS:ffff888233e00000(0000) knlGS:0000000000000000
[  145.570519] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  145.570571] CR2: 00007fa399b51421 CR3: 0000000137898002 CR4: 00000000003706e0
[  145.570623] Call Trace:
[  145.570675]  <TASK>
[  145.570727]  ? ath11k_ce_tx_process_cb+0x34b/0x860 [ath11k]
[  145.570797]  ath11k_ce_tx_process_cb+0x356/0x860 [ath11k]
[  145.570864]  ? tasklet_init+0x150/0x150
[  145.570919]  ? ath11k_ce_alloc_pipes+0x280/0x280 [ath11k]
[  145.570986]  ? tasklet_clear_sched+0x42/0xe0
[  145.571042]  ? tasklet_kill+0xe9/0x1b0
[  145.571095]  ? tasklet_clear_sched+0xe0/0xe0
[  145.571148]  ? irq_has_action+0x120/0x120
[  145.571202]  ath11k_ce_cleanup_pipes+0x45a/0x580 [ath11k]
[  145.571270]  ? ath11k_pci_stop+0x10e/0x170 [ath11k_pci]
[  145.571345]  ath11k_core_stop+0x8a/0xc0 [ath11k]
[  145.571434]  ath11k_core_deinit+0x9e/0x150 [ath11k]
[  145.571499]  ath11k_pci_remove+0xd2/0x260 [ath11k_pci]
[  145.571553]  pci_device_remove+0x9a/0x1c0
[  145.571605]  __device_release_driver+0x332/0x660
[  145.571659]  driver_detach+0x1e7/0x2c0
[  145.571712]  bus_remove_driver+0xe2/0x2d0
[  145.571772]  pci_unregister_driver+0x21/0x250
[  145.571826]  __do_sys_delete_module+0x30a/0x4b0
[  145.571879]  ? free_module+0xac0/0xac0
[  145.571933]  ? lockdep_hardirqs_on_prepare.part.0+0x18c/0x370
[  145.571986]  ? syscall_enter_from_user_mode+0x1d/0x50
[  145.572039]  ? lockdep_hardirqs_on+0x79/0x100
[  145.572097]  do_syscall_64+0x3b/0x90
[  145.572153]  entry_SYSCALL_64_after_hwframe+0x44/0xae

Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03003-QCAHSPSWPL_V1_V2_SILICONZ_LITE-2

Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220127090117.2024-2-kvalo@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

ath11k: fix kernel panic during unload/load ath11k modules

[ Upstream commit 22b59cb965f79ee1accf83172441c9ca0ecb632a ]

Call netif_napi_del() from ath11k_ahb_free_ext_irq() to fix
the following kernel panic when unload/load ath11k modules
for few iterations.

[  971.201365] Unable to handle kernel paging request at virtual address 6d97a208
[  971.204227] pgd = 594c2919
[  971.211478] [6d97a208] *pgd=00000000
[  971.214120] Internal error: Oops: 5 [#1] PREEMPT SMP ARM
[  971.412024] CPU: 2 PID: 4435 Comm: insmod Not tainted 5.4.89 #0
[  971.434256] Hardware name: Generic DT based system
[  971.440165] PC is at napi_by_id+0x10/0x40
[  971.445019] LR is at netif_napi_add+0x160/0x1dc

[  971.743127] (napi_by_id) from [<807d89a0>] (netif_napi_add+0x160/0x1dc)
[  971.751295] (netif_napi_add) from [<7f1209ac>] (ath11k_ahb_config_irq+0xf8/0x414 [ath11k_ahb])
[  971.759164] (ath11k_ahb_config_irq [ath11k_ahb]) from [<7f12135c>] (ath11k_ahb_probe+0x40c/0x51c [ath11k_ahb])
[  971.768567] (ath11k_ahb_probe [ath11k_ahb]) from [<80666864>] (platform_drv_probe+0x48/0x94)
[  971.779670] (platform_drv_probe) from [<80664718>] (really_probe+0x1c8/0x450)
[  971.789389] (really_probe) from [<80664cc4>] (driver_probe_device+0x15c/0x1b8)
[  971.797547] (driver_probe_device) from [<80664f60>] (device_driver_attach+0x44/0x60)
[  971.805795] (device_driver_attach) from [<806650a0>] (__driver_attach+0x124/0x140)
[  971.814822] (__driver_attach) from [<80662adc>] (bus_for_each_dev+0x58/0xa4)
[  971.823328] (bus_for_each_dev) from [<80663a2c>] (bus_add_driver+0xf0/0x1e8)
[  971.831662] (bus_add_driver) from [<806658a4>] (driver_register+0xa8/0xf0)
[  971.839822] (driver_register) from [<8030269c>] (do_one_initcall+0x78/0x1ac)
[  971.847638] (do_one_initcall) from [<80392524>] (do_init_module+0x54/0x200)
[  971.855968] (do_init_module) from [<803945b0>] (load_module+0x1e30/0x1ffc)
[  971.864126] (load_module) from [<803948b0>] (sys_init_module+0x134/0x17c)
[  971.871852] (sys_init_module) from [<80301000>] (ret_fast_syscall+0x0/0x50)

Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.6.0.1-00760-QCAHKSWPL_SILICONZ-1

Signed-off-by: Venkateswara Naralasetty <quic_vnaralas@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/1642583973-21599-1-git-send-email-quic_vnaralas@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc: dts: t104xrdb: fix phy type for FMAN 4/5

[ Upstream commit 17846485dff91acce1ad47b508b633dffc32e838 ]

T1040RDB has two RTL8211E-VB phys which requires setting
of internal delays for correct work.

Changing the phy-connection-type property to `rgmii-id`
will fix this issue.

Signed-off-by: Maxim Kiselev <bigunclemax@gmail.com>
Reviewed-by: Maxim Kochetkov <fido_max@inbox.ru>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211230151123.1258321-1-bigunclemax@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

ptp: replace snprintf with sysfs_emit

[ Upstream commit e2cf07654efb0fd7bbcb475c6f74be7b5755a8fd ]

coccinelle report:
./drivers/ptp/ptp_sysfs.c:17:8-16:
WARNING: use scnprintf or sprintf
./drivers/ptp/ptp_sysfs.c:390:8-16:
WARNING: use scnprintf or sprintf

Use sysfs_emit instead of scnprintf or sprintf makes more sense.

Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Yang Guang <yang.guang5@zte.com.cn>
Signed-off-by: David Yang <davidcomponentone@gmail.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: gadget: tegra-xudc: Fix control endpoint's definitions

[ Upstream commit 7bd42fb95eb4f98495ccadf467ad15124208ec49 ]

According to the Tegra Technical Reference Manual, the seq_num
field of control endpoint is not [31:24] but [31:27]. Bit 24
is reserved and bit 26 is splitxstate.

The change fixes the wrong control endpoint's definitions.

Signed-off-by: Wayne Chang <waynec@nvidia.com>
Link: https://lore.kernel.org/r/20220107091349.149798-1-waynec@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: gadget: tegra-xudc: Do not program SPARAM

[ Upstream commit 62fb61580eb48fc890b7bc9fb5fd263367baeca8 ]

According to the Tegra Technical Reference Manual, SPARAM
is a read-only register and should not be programmed in
the driver.

The change removes the wrong SPARAM usage.

Signed-off-by: Wayne Chang <waynec@nvidia.com>
Link: https://lore.kernel.org/r/20220107090443.149021-1-waynec@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/amdgpu/amdgpu_cs: fix refcount leak of a dma_fence obj

[ Upstream commit dfced44f122c500004a48ecc8db516bb6a295a1b ]

This issue takes place in an error path in
amdgpu_cs_fence_to_handle_ioctl(). When `info->in.what` falls into
default case, the function simply returns -EINVAL, forgetting to
decrement the reference count of a dma_fence obj, which is bumped
earlier by amdgpu_cs_get_fence(). This may result in reference count
leaks.

Fix it by decreasing the refcount of specific object before returning
the error code.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Xin Xiong <xiongx18@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: Add signal type check when verify stream backends same

[ Upstream commit 047db281c026de5971cedb5bb486aa29bd16a39d ]

[Why]
For allow eDP hot-plug feature, the stream signal may change to VIRTUAL
when plug-out and back to eDP when plug-in. OS will still setPathMode
with same timing for each plugging, but eDP gets no stream update as we
don't check signal type changing back as keeping it VIRTUAL. It's also
unsafe for future cases that stream signal is switched with same timing.

[How]
Check stream signal type change include previous HDMI signal case.

Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Dale Zhao <dale.zhao@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ath5k: fix OOB in ath5k_eeprom_read_pcal_info_5111

[ Upstream commit 564d4eceb97eaf381dd6ef6470b06377bb50c95a ]

The bug was found during fuzzing. Stacktrace locates it in
ath5k_eeprom_convert_pcal_info_5111.
When none of the curve is selected in the loop, idx can go
up to AR5K_EEPROM_N_PD_CURVES. The line makes pd out of bound.
pd = &chinfo[pier].pd_curves[idx];

There are many OOB writes using pd later in the code. So I
added a sanity check for idx. Checks for other loops involving
AR5K_EEPROM_N_PD_CURVES are not needed as the loop index is not
used outside the loops.

The patch is NOT tested with real device.

The following is the fuzzing report

BUG: KASAN: slab-out-of-bounds in ath5k_eeprom_read_pcal_info_5111+0x126a/0x1390 [ath5k]
Write of size 1 at addr ffff8880174a4d60 by task modprobe/214

CPU: 0 PID: 214 Comm: modprobe Not tainted 5.6.0 #1
Call Trace:
 dump_stack+0x76/0xa0
 print_address_description.constprop.0+0x16/0x200
 ? ath5k_eeprom_read_pcal_info_5111+0x126a/0x1390 [ath5k]
 ? ath5k_eeprom_read_pcal_info_5111+0x126a/0x1390 [ath5k]
 __kasan_report.cold+0x37/0x7c
 ? ath5k_eeprom_read_pcal_info_5111+0x126a/0x1390 [ath5k]
 kasan_report+0xe/0x20
 ath5k_eeprom_read_pcal_info_5111+0x126a/0x1390 [ath5k]
 ? apic_timer_interrupt+0xa/0x20
 ? ath5k_eeprom_init_11a_pcal_freq+0xbc0/0xbc0 [ath5k]
 ? ath5k_pci_eeprom_read+0x228/0x3c0 [ath5k]
 ath5k_eeprom_init+0x2513/0x6290 [ath5k]
 ? ath5k_eeprom_init_11a_pcal_freq+0xbc0/0xbc0 [ath5k]
 ? usleep_range+0xb8/0x100
 ? apic_timer_interrupt+0xa/0x20
 ? ath5k_eeprom_read_pcal_info_2413+0x2f20/0x2f20 [ath5k]
 ath5k_hw_init+0xb60/0x1970 [ath5k]
 ath5k_init_ah+0x6fe/0x2530 [ath5k]
 ? kasprintf+0xa6/0xe0
 ? ath5k_stop+0x140/0x140 [ath5k]
 ? _dev_notice+0xf6/0xf6
 ? apic_timer_interrupt+0xa/0x20
 ath5k_pci_probe.cold+0x29a/0x3d6 [ath5k]
 ? ath5k_pci_eeprom_read+0x3c0/0x3c0 [ath5k]
 ? mutex_lock+0x89/0xd0
 ? ath5k_pci_eeprom_read+0x3c0/0x3c0 [ath5k]
 local_pci_probe+0xd3/0x160
 pci_device_probe+0x23f/0x3e0
 ? pci_device_remove+0x280/0x280
 ? pci_device_remove+0x280/0x280
 really_probe+0x209/0x5d0

Reported-by: Brendan Dolan-Gavitt <brendandg@nyu.edu>
Signed-off-by: Zekun Shen <bruceshenzk@gmail.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/YckvDdj3mtCkDRIt@a-10-27-26-18.dynapool.vpn.nyu.edu
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm: Add orientation quirk for GPD Win Max

[ Upstream commit 0b464ca3e0dd3cec65f28bc6d396d82f19080f69 ]

Panel is 800x1280, but mounted on a laptop form factor, sideways.

Signed-off-by: Anisse Astier <anisse@astier.eu>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211229222200.53128-3-anisse@astier.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: x86/emulator: Emulate RDPID only if it is enabled in guest

[ Upstream commit a836839cbfe60dc434c5476a7429cf2bae36415d ]

When RDTSCP is supported but RDPID is not supported in host,
RDPID emulation is available. However, __kvm_get_msr() would
only fail when RDTSCP/RDPID both are disabled in guest, so
the emulator wouldn't inject a #UD when RDPID is disabled but
RDTSCP is enabled in guest.

Fixes: fb6d4d340e05 ("KVM: x86: emulate RDPID")
Signed-off-by: Hou Wenlong <houwenlong.hwl@antgroup.com>
Message-Id: <1dfd46ae5b76d3ed87bde3154d51c64ea64c99c1.1646226788.git.houwenlong.hwl@antgroup.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: x86/svm: Clear reserved bits written to PerfEvtSeln MSRs

[ Upstream commit 9b026073db2f1ad0e4d8b61c83316c8497981037 ]

AMD EPYC CPUs never raise a #GP for a WRMSR to a PerfEvtSeln MSR. Some
reserved bits are cleared, and some are not. Specifically, on
Zen3/Milan, bits 19 and 42 are not cleared.

When emulating such a WRMSR, KVM should not synthesize a #GP,
regardless of which bits are set. However, undocumented bits should
not be passed through to the hardware MSR. So, rather than checking
for reserved bits and synthesizing a #GP, just clear the reserved
bits.

This may seem pedantic, but since KVM currently does not support the
"Host/Guest Only" bits (41:40), it is necessary to clear these bits
rather than synthesizing #GP, because some popular guests (e.g Linux)
will set the "Host Only" bit even on CPUs that don't support
EFER.SVME, and they don't expect a #GP.

For example,

root@Ubuntu1804:~# perf stat -e r26 -a sleep 1

 Performance counter stats for 'system wide':

                 0      r26

       1.001070977 seconds time elapsed

Feb 23 03:59:58 Ubuntu1804 kernel: [  405.379957] unchecked MSR access error: WRMSR to 0xc0010200 (tried to write 0x0000020000130026) at rIP: 0xffffffff9b276a28 (native_write_msr+0x8/0x30)
Feb 23 03:59:58 Ubuntu1804 kernel: [  405.379958] Call Trace:
Feb 23 03:59:58 Ubuntu1804 kernel: [  405.379963]  amd_pmu_disable_event+0x27/0x90

Fixes: ca724305a2b0 ("KVM: x86/vPMU: Implement AMD vPMU code for KVM")
Reported-by: Lotus Fenn <lotusf@google.com>
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Like Xu <likexu@tencent.com>
Reviewed-by: David Dunn <daviddunn@google.com>
Message-Id: <20220226234131.2167175-1-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rtc: wm8350: Handle error for wm8350_register_irq

[ Upstream commit 43f0269b6b89c1eec4ef83c48035608f4dcdd886 ]

As the potential failure of the wm8350_register_irq(),
it should be better to check it and return error if fails.
Also, it need not free 'wm_rtc->rtc' since it will be freed
automatically.

Fixes: 077eaf5b40ec ("rtc: rtc-wm8350: add support for WM8350 RTC")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20220303085030.291793-1-jiasheng@iscas.ac.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>

gfs2: gfs2_setattr_size error path fix

[ Upstream commit 7336905a89f19173bf9301cd50a24421162f417c ]

When gfs2_setattr_size() fails, it calls gfs2_rs_delete(ip, NULL) to get
rid of any reservations the inode may have.  Instead, it should pass in
the inode's write count as the second parameter to allow
gfs2_rs_delete() to figure out if the inode has any writers left.

In a next step, there are two instances of gfs2_rs_delete(ip, NULL) left
where we know that there can be no other users of the inode.  Replace
those with gfs2_rs_deltree(&ip->i_res) to avoid the unnecessary write
count check.

With that, gfs2_rs_delete() is only called with the inode's actual write
count, so get rid of the second parameter.

Fixes: a097dc7e24cb ("GFS2: Make rgrp reservations part of the gfs2_inode structure")
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gfs2: Fix gfs2_release for non-writers regression

[ Upstream commit d3add1a9519dcacd6e644ecac741c56cf18b67f5 ]

When a file is opened for writing, the vfs code (do_dentry_open)
calls get_write_access for the inode, thus incrementing the inode's write
count. That writer normally then creates a multi-block reservation for
the inode (i_res) that can be re-used by other writers, which speeds up
writes for applications that stupidly loop on open/write/close.
When the writes are all done, the multi-block reservation should be
deleted when the file is closed by the last "writer."

Commit 0ec9b9ea4f83 broke that concept when it moved the call to
gfs2_rs_delete before the check for FMODE_WRITE.  Non-writers have no
business removing the multi-block reservations of writers. In fact, if
someone opens and closes the file for RO while a writer has a
multi-block reservation, the RO closer will delete the reservation
midway through the write, and this results in:

kernel BUG at fs/gfs2/rgrp.c:677! (or thereabouts) which is:
BUG_ON(rs->rs_requested); from function gfs2_rs_deltree.

This patch moves the check back inside the check for FMODE_WRITE.

Fixes: 0ec9b9ea4f83 ("gfs2: Check for active reservation in gfs2_release")
Cc: stable@vger.kernel.org # v5.12+
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gfs2: Check for active reservation in gfs2_release

[ Upstream commit 0ec9b9ea4f83303bfd8f052a3d8b2bd179b002e1 ]

In gfs2_release, check if the inode has an active reservation to avoid
unnecessary lock taking.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ubifs: Rectify space amount budget for mkdir/tmpfile operations

[ Upstream commit a6dab6607d4681d227905d5198710b575dbdb519 ]

UBIFS should make sure the flash has enough space to store dirty (Data
that is newer than disk) data (in memory), space budget is exactly
designed to do that. If space budget calculates less data than we need,
'make_reservation()' will do more work(return -ENOSPC if no free space
lelf, sometimes we can see "cannot reserve xxx bytes in jhead xxx, error
-28" in ubifs error messages) with ubifs inodes locked, which may effect
other syscalls.

A simple way to decide how much space do we need when make a budget:
See how much space is needed by 'make_reservation()' in ubifs_jnl_xxx()
function according to corresponding operation.

It's better to report ENOSPC in ubifs_budget_space(), as early as we can.

Fixes: 474b93704f32163 ("ubifs: Implement O_TMPFILE")
Fixes: 1e51764a3c2ac05 ("UBIFS: add new flash file system")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Linux 5.10.110

Link: https://lore.kernel.org/r/20220405070258.802373272@linuxfoundation.org
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Pavel Machek (CIP) <pavel@denx.de>
Tested-by: Slade Watkins <slade@sladewatkins.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Fox Chen <foxhlchen@gmail.com>
Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Link: https://lore.kernel.org/r/20220406133013.264188813@linuxfoundation.org
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Fox Chen <foxhlchen@gmail.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Link: https://lore.kernel.org/r/20220407183749.142181327@linuxfoundation.org
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Fox Chen <foxhlchen@gmail.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Hulk Robot <hulkrobot@huawei.com>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: xgene: Revert "PCI: xgene: Use inbound resources for setup"

commit 1874b6d7ab1bdc900e8398026350313ac29caddb upstream.

Commit 6dce5aa59e0b ("PCI: xgene: Use inbound resources for setup")
killed PCIe on my XGene-1 box (a Mustang board). The machine itself
is still alive, but half of its storage (over NVMe) is gone, and the
NVMe driver just times out.

Note that this machine boots with a device tree provided by the
UEFI firmware (2016 vintage), which could well be non conformant
with the spec, hence the breakage.

With the patch reverted, the box boots 5.17-rc8 with flying colors.

Link: https://lore.kernel.org/all/Yf2wTLjmcRj+AbDv@xps13.dannf
Link: https://lore.kernel.org/r/20220321104843.949645-2-maz@kernel.org
Fixes: 6dce5aa59e0b ("PCI: xgene: Use inbound resources for setup")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: stable@vger.kernel.org
Cc: Rob Herring <robh@kernel.org>
Cc: Toan Le <toan@os.amperecomputing.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Krzysztof Wilczyński <kw@linux.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Stéphane Graber <stgraber@ubuntu.com>
Cc: dann frazier <dann.frazier@canonical.com>
[dannf: minor context adjustment]
Signed-off-by: dann frazier <dann.frazier@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: Do not defer reserve_crashkernel() for platforms with no DMA memory zones

commit 031495635b4668f94e964e037ca93d0d38bfde58 upstream.

The following patches resulted in deferring crash kernel reservation to
mem_init(), mainly aimed at platforms with DMA memory zones (no IOMMU),
in particular Raspberry Pi 4.

commit 1a8e1cef7603 ("arm64: use both ZONE_DMA and ZONE_DMA32")
commit 8424ecdde7df ("arm64: mm: Set ZONE_DMA size based on devicetree's dma-ranges")
commit 0a30c53573b0 ("arm64: mm: Move reserve_crashkernel() into mem_init()")
commit 2687275a5843 ("arm64: Force NO_BLOCK_MAPPINGS if crashkernel reservation is required")

Above changes introduced boot slowdown due to linear map creation for
all the memory banks with NO_BLOCK_MAPPINGS, see discussion[1].  The proposed
changes restore crash kernel reservation to earlier behavior thus avoids
slow boot, particularly for platforms with IOMMU (no DMA memory zones).

Tested changes to confirm no ~150ms boot slowdown on our SoC with IOMMU
and 8GB memory.  Also tested with ZONE_DMA and/or ZONE_DMA32 configs to confirm
no regression to deferring scheme of crash kernel memory reservation.
In both cases successfully collected kernel crash dump.

[1] https://lore.kernel.org/all/9436d033-579b-55fa-9b00-6f4b661c2dd7@linux.microsoft.com/

Signed-off-by: Vijay Balakrishna <vijayb@linux.microsoft.com>
Cc: stable@vger.kernel.org
Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Link: https://lore.kernel.org/r/1646242689-20744-1-git-send-email-vijayb@linux.microsoft.com
[will: Add #ifdef CONFIG_KEXEC_CORE guards to fix 'crashk_res' references in allnoconfig build]
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

coredump: Use the vma snapshot in fill_files_note

commit 390031c942116d4733310f0684beb8db19885fe6 upstream.

Matthew Wilcox reported that there is a missing mmap_lock in
file_files_note that could possibly lead to a user after free.

Solve this by using the existing vma snapshot for consistency
and to avoid the need to take the mmap_lock anywhere in the
coredump code except for dump_vma_snapshot.

Update the dump_vma_snapshot to capture vm_pgoff and vm_file
that are neeeded by fill_files_note.

Add free_vma_snapshot to free the captured values of vm_file.

Reported-by: Matthew Wilcox <willy@infradead.org>
Link: https://lkml.kernel.org/r/20220131153740.2396974-1-willy@infradead.org
Cc: stable@vger.kernel.org
Fixes: a07279c9a8cd ("binfmt_elf, binfmt_elf_fdpic: use a VMA list snapshot")
Fixes: 2aa362c49c31 ("coredump: extend core dump note section to contain file names of mapped files")
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

coredump/elf: Pass coredump_params into fill_note_info

commit 9ec7d3230717b4fe9b6c7afeb4811909c23fa1d7 upstream.

Instead of individually passing cprm->siginfo and cprm->regs
into fill_note_info pass all of struct coredump_params.

This is preparation to allow fill_files_note to use the existing
vma snapshot.

Reviewed-by: Jann Horn <jannh@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

coredump: Remove the WARN_ON in dump_vma_snapshot

commit 49c1866348f364478a0c4d3dd13fd08bb82d3a5b upstream.

The condition is impossible and to the best of my knowledge has never
triggered.

We are in deep trouble if that conditions happens and we walk past
the end of our allocated array.

So delete the WARN_ON and the code that makes it look like the kernel
can handle the case of walking past the end of it's vma_meta array.

Reviewed-by: Jann Horn <jannh@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

coredump: Snapshot the vmas in do_coredump

commit 95c5436a4883841588dae86fb0b9325f47ba5ad3 upstream.

Move the call of dump_vma_snapshot and kvfree(vma_meta) out of the
individual coredump routines into do_coredump itself.  This makes
the code less error prone and easier to maintain.

Make the vma snapshot available to the coredump routines
in struct coredump_params.  This makes it easier to
change and update what is captures in the vma snapshot
and will be needed for fixing fill_file_notes.

Reviewed-by: Jann Horn <jannh@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: usb_8dev: usb_8dev_start_xmit(): fix double dev_kfree_skb() in error path

commit 3d3925ff6433f98992685a9679613a2cc97f3ce2 upstream.

There is no need to call dev_kfree_skb() when usb_submit_urb() fails
because can_put_echo_skb() deletes original skb and
can_free_echo_skb() deletes the cloned skb.

Fixes: 0024d8ad1639 ("can: usb_8dev: Add support for USB2CAN interface from 8 devices")
Link: https://lore.kernel.org/all/20220311080614.45229-1-hbh25y@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: m_can: m_can_tx_handler(): fix use after free of skb

commit 2e8e79c416aae1de224c0f1860f2e3350fa171f8 upstream.

can_put_echo_skb() will clone skb then free the skb. Move the
can_put_echo_skb() for the m_can version 3.0.x directly before the
start of the xmit in hardware, similar to the 3.1.x branch.

Fixes: 80646733f11c ("can: m_can: update to support CAN FD features")
Link: https://lore.kernel.org/all/20220317081305.739554-1-mkl@pengutronix.de
Cc: stable@vger.kernel.org
Reported-by: Hangyu Hua <hbh25y@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86/mmu: do compare-and-exchange of gPTE via the user address

commit 2a8859f373b0a86f0ece8ec8312607eacf12485d upstream.

FNAME(cmpxchg_gpte) is an inefficient mess.  It is at least decent if it
can go through get_user_pages_fast(), but if it cannot then it tries to
use memremap(); that is not just terribly slow, it is also wrong because
it assumes that the VM_PFNMAP VMA is contiguous.

The right way to do it would be to do the same thing as
hva_to_pfn_remapped() does since commit add6a0cd1c5b ("KVM: MMU: try to
fix up page faults before giving up", 2016-07-05), using follow_pte()
and fixup_user_fault() to determine the correct address to use for
memremap().  To do this, one could for example extract hva_to_pfn()
for use outside virt/kvm/kvm_main.c.  But really there is no reason to
do that either, because there is already a perfectly valid address to
do the cmpxchg() on, only it is a userspace address.  That means doing
user_access_begin()/user_access_end() and writing the code in assembly
to handle exceptions correctly.  Worse, the guest PTE can be 8-byte
even on i686 so there is the extra complication of using cmpxchg8b to
account for.  But at least it is an efficient mess.

(Thanks to Linus for suggesting improvement on the inline assembly).

Reported-by: Qiuhao Li <qiuhao@sysec.org>
Reported-by: Gaoning Pan <pgn@zju.edu.cn>
Reported-by: Yongkang Jia <kangel@zju.edu.cn>
Reported-by: syzbot+6cde2282daa792c49ab8@syzkaller.appspotmail.com
Debugged-by: Tadeusz Struk <tadeusz.struk@linaro.org>
Tested-by: Maxim Levitsky <mlevitsk@redhat.com>
Cc: stable@vger.kernel.org
Fixes: bd53cb35a3e9 ("X86/KVM: Handle PFNs outside of kernel reach when touching GPTEs")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

openvswitch: Fixed nd target mask field in the flow dump.

commit f19c44452b58a84d95e209b847f5495d91c9983a upstream.

IPv6 nd target mask was not getting populated in flow dump.

In the function __ovs_nla_put_key the icmp code mask field was checked
instead of icmp code key field to classify the flow as neighbour discovery.

ufid:bdfbe3e5-60c2-43b0-a5ff-dfcac1c37328, recirc_id(0),dp_hash(0/0),
skb_priority(0/0),in_port(ovs-nm1),skb_mark(0/0),ct_state(0/0),
ct_zone(0/0),ct_mark(0/0),ct_label(0/0),
eth(src=00:00:00:00:00:00/00:00:00:00:00:00,
dst=00:00:00:00:00:00/00:00:00:00:00:00),
eth_type(0x86dd),
ipv6(src=::/::,dst=::/::,label=0/0,proto=58,tclass=0/0,hlimit=0/0,frag=no),
icmpv6(type=135,code=0),
nd(target=2001::2/::,
sll=00:00:00:00:00:00/00:00:00:00:00:00,
tll=00:00:00:00:00:00/00:00:00:00:00:00),
packets:10, bytes:860, used:0.504s, dp:ovs, actions:ovs-nm2

Fixes: e64457191a25 (openvswitch: Restructure datapath.c and flow.c)
Signed-off-by: Martin Varghese <martin.varghese@nokia.com>
Link: https://lore.kernel.org/r/20220328054148.3057-1-martinvarghesenokia@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>