media: cedrus: Add missing v4l2_ctrl_request_hdl_put()

[ Upstream commit b30063976f29fc221a99d18d37d22ca035068aa9 ]

The check for a required control in the request was missing a call to
v4l2_ctrl_request_hdl_put() in the error path. Fix it.

Fixes: 50e761516f2b8c ("media: platform: Add Cedrus VPU decoder driver")
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: vicodec: add missing v4l2_ctrl_request_hdl_put()

[ Upstream commit 2e7c8fb8942773f412fe12f3b63e8bb92c18ab3f ]

The check for a required control in the request was missing a call to
v4l2_ctrl_request_hdl_put(), so the control request object was never
released.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: 997deb811bf5 ("media: vicodec: Add support for stateless decoder.")
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bnxt: don't enable NAPI until rings are ready

[ Upstream commit 96ecdcc992eb7f468b2cf829b0f5408a1fad4668 ]

Netpoll can try to poll napi as soon as napi_enable() is called.
It crashes trying to access a doorbell which is still NULL:

 BUG: kernel NULL pointer dereference, address: 0000000000000000
 CPU: 59 PID: 6039 Comm: ethtool Kdump: loaded Tainted: G S                5.9.0-rc1-00469-g5fd99b5d9950-dirty #26
 RIP: 0010:bnxt_poll+0x121/0x1c0
 Code: c4 20 44 89 e0 5b 5d 41 5c 41 5d 41 5e 41 5f c3 41 8b 86 a0 01 00 00 41 23 85 18 01 00 00 49 8b 96 a8 01 00 00 0d 00 00 00 24 <89> 02
41 f6 45 77 02 74 cb 49 8b ae d8 01 00 00 31 c0 c7 44 24 1a
  netpoll_poll_dev+0xbd/0x1a0
  __netpoll_send_skb+0x1b2/0x210
  netpoll_send_udp+0x2c9/0x406
  write_ext_msg+0x1d7/0x1f0
  console_unlock+0x23c/0x520
  vprintk_emit+0xe0/0x1d0
  printk+0x58/0x6f
  x86_vector_activate.cold+0xf/0x46
  __irq_domain_activate_irq+0x50/0x80
  __irq_domain_activate_irq+0x32/0x80
  __irq_domain_activate_irq+0x32/0x80
  irq_domain_activate_irq+0x25/0x40
  __setup_irq+0x2d2/0x700
  request_threaded_irq+0xfb/0x160
  __bnxt_open_nic+0x3b1/0x750
  bnxt_open_nic+0x19/0x30
  ethtool_set_channels+0x1ac/0x220
  dev_ethtool+0x11ba/0x2240
  dev_ioctl+0x1cf/0x390
  sock_do_ioctl+0x95/0x130

Reported-by: Rob Sherwood <rsher@fb.com>
Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xfs: fix boundary test in xfs_attr_shortform_verify

[ Upstream commit f4020438fab05364018c91f7e02ebdd192085933 ]

The boundary test for the fixed-offset parts of xfs_attr_sf_entry in
xfs_attr_shortform_verify is off by one, because the variable array
at the end is defined as nameval[1] not nameval[].
Hence we need to subtract 1 from the calculation.

This can be shown by:

# touch file
# setfattr -n root.a file

and verifications will fail when it's written to disk.

This only matters for a last attribute which has a single-byte name
and no value, otherwise the combination of namelen & valuelen will
push endp further out and this test won't fail.

Fixes: 1e1bbd8e7ee06 ("xfs: create structure verifier function for shortform xattrs")
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xfs: finish dfops on every insert range shift iteration

[ Upstream commit 9c516e0e4554e8f26ab73d46cbc789d7d8db664d ]

The recent change to make insert range an atomic operation used the
incorrect transaction rolling mechanism. The explicit transaction
roll does not finish deferred operations. This means that intents
for rmapbt updates caused by extent shifts are not logged until the
final transaction commits. Thus if a crash occurs during an insert
range, log recovery might leave the rmapbt in an inconsistent state.
This was discovered by repeated runs of generic/455.

Update insert range to finish dfops on every shift iteration. This
is similar to collapse range and ensures that intents are logged
with the transactions that make associated changes.

Fixes: dd87f87d87fa ("xfs: rework insert range into an atomic operation")
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bnxt_en: fix HWRM error when querying VF temperature

[ Upstream commit 12cce90b934bf2b0ed9c339b4d5503e69954351a ]

Firmware returns RESOURCE_ACCESS_DENIED for HWRM_TEMP_MONITORY_QUERY for
VFs. This produces unpleasing error messages in the log when temp1_input
is queried via the hwmon sysfs interface from a VF.

The error is harmless and expected, so silence it and return unknown as
the value. Since the device temperature is not particularly sensitive
information, provide flexibility to change this policy in future by
silencing the error rather than avoiding the HWRM call entirely for VFs.

Fixes: cde49a42a9bb ("bnxt_en: Add hwmon sysfs support to read temperature")
Cc: Marc Smith <msmith626@gmail.com>
Reported-by: Marc Smith <msmith626@gmail.com>
Signed-off-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bnxt_en: Fix possible crash in bnxt_fw_reset_task().

[ Upstream commit b148bb238c02f0c7797efed026e9bba5892d2172 ]

bnxt_fw_reset_task() is run from a delayed workqueue.  The current
code is not cancelling the workqueue in the driver's .remove()
method and it can potentially crash if the device is removed with
the workqueue still pending.

The fix is to clear the BNXT_STATE_IN_FW_RESET flag and then cancel
the delayed workqueue in bnxt_remove_one().  bnxt_queue_fw_reset_work()
also needs to check that this flag is set before scheduling.  This
will guarantee that no rescheduling will be done after it is cancelled.

Fixes: 230d1f0de754 ("bnxt_en: Handle firmware reset.")
Reviewed-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bnxt_en: Fix PCI AER error recovery flow

[ Upstream commit df3875ec550396974b1d8a518bd120d034738236 ]

When a PCI error is detected the PCI state could be corrupt, save
the PCI state after initialization and restore it after the slot
reset.

Fixes: 6316ea6db93d ("bnxt_en: Enable AER support.")
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bnxt_en: Fix ethtool -S statitics with XDP or TCs enabled.

[ Upstream commit 7de651490c27ebc5edb5c7224c368bd0cd5b3862 ]

We are returning the wrong count for ETH_SS_STATS in get_sset_count()
when XDP or TCs are enabled.  In a recent commit, we got rid of
irrelevant counters when the ring is RX only or TX only, but we
did not make the proper adjustments for the count.  As a result,
when we have XDP or TCs enabled, we are returning an excess count
because some of the rings are TX only.  This causes ethtool -S to
display extra counters with no counter names.

Fix bnxt_get_num_ring_stats() by not assuming that all rings will
always have RX and TX counters in combined mode.

Fixes: 125592fbf467 ("bnxt_en: show only relevant ethtool stats for a TX or RX ring")
Reviewed-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bnxt_en: Check for zero dir entries in NVRAM.

[ Upstream commit dbbfa96ad920c50d58bcaefa57f5f33ceef9d00e ]

If firmware goes into unstable state, HWRM_NVM_GET_DIR_INFO firmware
command may return zero dir entries. Return error in such case to
avoid zero length dma buffer request.

Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.")
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bnxt_en: Don't query FW when netif_running() is false.

[ Upstream commit c1c2d77408022a398a1a7c51cf20488c922629de ]

In rare conditions like two stage OS installation, the
ethtool's get_channels function may be called when the
device is in D3 state, leading to uncorrectable PCI error.
Check netif_running() first before making any query to FW
which involves writing to BAR.

Fixes: db4723b3cd2d ("bnxt_en: Check max_tx_scheduler_inputs value from firmware.")
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ethernet: ti: cpsw_new: fix clean up of vlan mc entries for host port

[ Upstream commit 2c6500e82e5190b038f0b79f85a20da55bdd4b86 ]

To flush the vid + mc entries from ALE, which is required when a VLAN
interface is removed, driver needs to call cpsw_ale_flush_multicast()
with ALE_PORT_HOST for port mask as these entries are added only for
host port. Without this, these entries remain in the ALE table even
after removing the VLAN interface. cpsw_ale_flush_multicast() calls
cpsw_ale_flush_mcast which expects a port mask to do the job.

Fixes: ed3525eda4c4 ("net: ethernet: ti: introduce cpsw switchdev based driver part 1 - dual-emac")
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ethernet: ti: cpsw: fix clean up of vlan mc entries for host port

[ Upstream commit 99d469fc64d06f0c81c0fe2a1c01645a67e0cbf0 ]

To flush the vid + mc entries from ALE, which is required when a VLAN
interface is removed, driver needs to call cpsw_ale_flush_multicast()
with ALE_PORT_HOST for port mask as these entries are added only for
host port. Without this, these entries remain in the ALE table even
after removing the VLAN interface. cpsw_ale_flush_multicast() calls
cpsw_ale_flush_mcast which expects a port mask to do the job.

Fixes: 15180eca569b ("net: ethernet: ti: cpsw: fix vlan mcast")
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gtp: add GTPA_LINK info to msg sent to userspace

[ Upstream commit b274e47d9e3f4dcd4ad4028a316ec22dc4533ac7 ]

During a dump, this attribute is essential, it enables the userspace to
know on which interface the context is linked to.

Fixes: 459aa660eb1d ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)")
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Tested-by: Gabriel Ganne <gabriel.ganne@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: ti: k3-udma: Fix the TR initialization for prep_slave_sg

[ Upstream commit 33ebffa105990c43bf336cabe26c77384f59fe70 ]

The TR which needs to be initialized for the next sg entry is indexed by
tr_idx and not by the running i counter.

In case any sub element in the SG needs more than one TR, the code would
corrupt an already configured TR.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20200824120108.9178-1-peter.ujfalusi@ti.com
Fixes: 6cf668a4ef829 ("dmaengine: ti: k3-udma: Use the TR counter helper for slave_sg and cyclic")
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: pl330: Fix burst length if burst size is smaller than bus width

[ Upstream commit 0661cef675d37e2c4b66a996389ebeae8568e49e ]

Move the burst len fixup after setting the generic value for it. This
finally enables the fixup introduced by commit 137bd11090d8 ("dmaengine:
pl330: Align DMA memcpy operations to MFIFO width"), which otherwise was
overwritten by the generic value.

Reported-by: kernel test robot <lkp@intel.com>
Fixes: 137bd11090d8 ("dmaengine: pl330: Align DMA memcpy operations to MFIFO width")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20200825064617.16193-1-m.szyprowski@samsung.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: Fix a buffer out-of-bound access when filling raw_tp link_info

[ Upstream commit b474959d5afda6e341a02c85f9595d85d39189ae ]

Commit f2e10bff16a0 ("bpf: Add support for BPF_OBJ_GET_INFO_BY_FD for bpf_link")
added link query for raw_tp. One of fields in link_info is to
fill a user buffer with tp_name. The Scurrent checking only
declares "ulen && !ubuf" as invalid. So "!ulen && ubuf" will be
valid. Later on, we do "copy_to_user(ubuf, tp_name, ulen - 1)" which
may overwrite user memory incorrectly.

This patch fixed the problem by disallowing "!ulen && ubuf" case as well.

Fixes: f2e10bff16a0 ("bpf: Add support for BPF_OBJ_GET_INFO_BY_FD for bpf_link")
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200821191054.714731-1-yhs@fb.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: arc_emac: Fix memleak in arc_mdio_probe

[ Upstream commit e2d79cd8875fa8c3cc7defa98a8cc99a1ed0c62f ]

When devm_gpiod_get_optional() fails, bus should be
freed just like when of_mdiobus_register() fails.

Fixes: 1bddd96cba03d ("net: arc_emac: support the phy reset for emac driver")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ravb: Fixed to be able to unload modules

[ Upstream commit 1838d6c62f57836639bd3d83e7855e0ee4f6defc ]

When this driver is built as a module, I cannot rmmod it after insmoding
it.
This is because that this driver calls ravb_mdio_init() at the time of
probe, and module->refcnt is incremented by alloc_mdio_bitbang() called
after that.
Therefore, even if ifup is not performed, the driver is in use and rmmod
cannot be performed.

$ lsmod
Module                  Size  Used by
ravb                   40960  1
$ rmmod ravb
rmmod: ERROR: Module ravb is in use

Call ravb_mdio_init() at open and free_mdio_bitbang() at close, thereby
rmmod is possible in the ifdown state.

Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper")
Signed-off-by: Yuusuke Ashizuka <ashiduka@fujitsu.com>
Reviewed-by: Sergei Shtylyov <sergei.shtylyov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: systemport: Fix memleak in bcm_sysport_probe

[ Upstream commit 7ef1fc57301f3cef7201497aa27e89ccb91737fe ]

When devm_kcalloc() fails, dev should be freed just
like what we've done in the subsequent error paths.

Fixes: 7b78be48a8eb6 ("net: systemport: Dynamically allocate number of TX rings")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: hns: Fix memleak in hns_nic_dev_probe

[ Upstream commit 100e3345c6e719d2291e1efd5de311cc24bb9c0b ]

hns_nic_dev_probe allocates ndev, but not free it on
two error handling paths, which may lead to memleak.

Fixes: 63434888aaf1b ("net: hns: net: hns: enet adds support of acpi")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nf_tables: fix destination register zeroing

[ Upstream commit 1e105e6afa6c3d32bfb52c00ffa393894a525c27 ]

Following bug was reported via irc:
nft list ruleset
   set knock_candidates_ipv4 {
      type ipv4_addr . inet_service
      size 65535
      elements = { 127.0.0.1 . 123,
                   127.0.0.1 . 123 }
      }
 ..
   udp dport 123 add @knock_candidates_ipv4 { ip saddr . 123 }
   udp dport 123 add @knock_candidates_ipv4 { ip saddr . udp dport }

It should not have been possible to add a duplicate set entry.

After some debugging it turned out that the problem is the immediate
value (123) in the second-to-last rule.

Concatenations use 32bit registers, i.e. the elements are 8 bytes each,
not 6 and it turns out the kernel inserted

inet firewall @knock_candidates_ipv4
        element 0100007f ffff7b00  : 0 [end]
        element 0100007f 00007b00  : 0 [end]

Note the non-zero upper bits of the first element.  It turns out that
nft_immediate doesn't zero the destination register, but this is needed
when the length isn't a multiple of 4.

Furthermore, the zeroing in nft_payload is broken.  We can't use
[len / 4] = 0 -- if len is a multiple of 4, index is off by one.

Skip zeroing in this case and use a conditional instead of (len -1) / 4.

Fixes: 49499c3e6e18 ("netfilter: nf_tables: switch registers to 32 bit addressing")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nf_tables: incorrect enum nft_list_attributes definition

[ Upstream commit da9125df854ea48a6240c66e8a67be06e2c12c03 ]

This should be NFTA_LIST_UNSPEC instead of NFTA_LIST_UNPEC, all other
similar attribute definitions are postfixed with _UNSPEC.

Fixes: 96518518cc41 ("netfilter: add nftables")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nf_tables: add NFTA_SET_USERDATA if not null

[ Upstream commit 6f03bf43ee05b31d3822def2a80f11b3591c55b3 ]

Kernel sends an empty NFTA_SET_USERDATA attribute with no value if
userspace adds a set with no NFTA_SET_USERDATA attribute.

Fixes: e6d8ecac9e68 ("netfilter: nf_tables: Add new attributes into nft_set to store user data.")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf top: Skip side-band event setup if HAVE_LIBBPF_SUPPORT is not set

[ Upstream commit 0c5f1acc2a14416bf30023f373558d369afdbfc8 ]

When I execute 'perf top' without HAVE_LIBBPF_SUPPORT, there exists the
following segmentation fault, skip the side-band event setup to fix it,
this is similar with commit 1101c872c8c7 ("perf record: Skip side-band
event setup if HAVE_LIBBPF_SUPPORT is not set").

  [yangtiezhu@linux perf]$ ./perf top
  <SNIP>
  perf: Segmentation fault
  Obtained 6 stack frames.
  ./perf(sighandler_dump_stack+0x5c) [0x12011b604]
  [0xffffffc010]
  ./perf(perf_mmap__read_init+0x3e) [0x1201feeae]
  ./perf() [0x1200d715c]
  /lib64/libpthread.so.0(+0xab9c) [0xffee10ab9c]
  /lib64/libc.so.6(+0x128f4c) [0xffedc08f4c]
  Segmentation fault
  [yangtiezhu@linux perf]$

I use git bisect to find commit b38d85ef49cf ("perf bpf: Decouple
creating the evlist from adding the SB event") is the first bad commit,
so also add the Fixes tag.

Committer testing:

First build perf explicitely disabling libbpf:

  $ make NO_LIBBPF=1 O=/tmp/build/perf -C tools/perf install-bin && perf test python

Now make sure it isn't linked:

  $ perf -vv | grep -w bpf
                   bpf: [ OFF ]  # HAVE_LIBBPF_SUPPORT
  $
  $ nm ~/bin/perf | grep libbpf
  $

And now try to run 'perf top':

  # perf top
  perf: Segmentation fault
  -------- backtrace --------
  perf[0x5bcd6d]
  /lib64/libc.so.6(+0x3ca6f)[0x7fd0f5a66a6f]
  perf(perf_mmap__read_init+0x1e)[0x5e1afe]
  perf[0x4cc468]
  /lib64/libpthread.so.0(+0x9431)[0x7fd0f645a431]
  /lib64/libc.so.6(clone+0x42)[0x7fd0f5b2b912]
  #

Applying this patch fixes the issue.

Fixes: b38d85ef49cf ("perf bpf: Decouple creating the evlist from adding the SB event")
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xuefeng Li <lixuefeng@loongson.cn>
Link: http://lore.kernel.org/lkml/1597753837-16222-1-git-send-email-yangtiezhu@loongson.cn
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf sched timehist: Fix use of CPU list with summary option

[ Upstream commit a74eaf1605d42391c2357a70e94e5a2c7780fea9 ]

Do not update thread stats or show idle summary unless CPU is in the
list of interest.

Fixes: c30d630d1bcfad8d ("perf sched timehist: Add support for filtering on CPU")
Signed-off-by: David Ahern <dsahern@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lore.kernel.org/lkml/20200817170943.1486-1-dsahern@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mmc: sdhci-acpi: Fix HS400 tuning for AMDI0040

[ Upstream commit 61d7437ed13906984c44697970ee792ac6271a31 ]

The AMD eMMC Controller can only use the tuned clock while in HS200 and
HS400 mode. If we switch to a different mode, we need to disable the
tuned clock. If we have previously performed tuning and switch back to
HS200 or HS400, we can re-enable the tuned clock.

Previously the tuned clock was not getting disabled when switching to
DDR52 which is part of the HS400 tuning sequence.

Fixes: 34597a3f60b1 ("mmc: sdhci-acpi: Add support for ACPI HID of AMD Controller with HS400")
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20200819125832.v2.1.Ie8f0689ec9f449203328b37409d1cf06b565f331@changeid
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

MIPS: BMIPS: Also call bmips_cpu_setup() for secondary cores

[ Upstream commit e14f633b66902615cf7faa5d032b45ab8b6fb158 ]

The initialization done by bmips_cpu_setup() typically affects both
threads of a given core, on 7435 which supports 2 cores and 2 threads,
logical CPU number 2 and 3 would not run this initialization.

Fixes: 738a3f79027b ("MIPS: BMIPS: Add early CPU initialization code")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

MIPS: mm: BMIPS5000 has inclusive physical caches

[ Upstream commit dbfc95f98f0158958d1f1e6bf06d74be38dbd821 ]

When the BMIPS generic cpu-feature-overrides.h file was introduced,
cpu_has_inclusive_caches/MIPS_CPU_INCLUSIVE_CACHES was not set for
BMIPS5000 CPUs. Correct this when we have initialized the MIPS secondary
cache successfully.

Fixes: f337967d6d87 ("MIPS: BMIPS: Add cpu-feature-overrides.h")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rxrpc: Make rxrpc_kernel_get_srtt() indicate validity

[ Upstream commit 1d4adfaf65746203861c72d9d78de349eb97d528 ]

Fix rxrpc_kernel_get_srtt() to indicate the validity of the returned
smoothed RTT.  If we haven't had any valid samples yet, the SRTT isn't
useful.

Fixes: c410bf01933e ("rxrpc: Fix the excessive initial retransmission timeout")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rxrpc: Fix loss of RTT samples due to interposed ACK

[ Upstream commit 4700c4d80b7bb171f6996016ef121e1508860b42 ]

The Rx protocol has a mechanism to help generate RTT samples that works by
a client transmitting a REQUESTED-type ACK when it receives a DATA packet
that has the REQUEST_ACK flag set.

The peer, however, may interpose other ACKs before transmitting the
REQUESTED-ACK, as can be seen in the following trace excerpt:

 rxrpc_tx_data: c=00000044 DATA d0b5ece8:00000001 00000001 q=00000001 fl=07
 rxrpc_rx_ack: c=00000044 00000001 PNG r=00000000 f=00000002 p=00000000 n=0
 rxrpc_rx_ack: c=00000044 00000002 REQ r=00000001 f=00000002 p=00000001 n=0
 ...

DATA packet 1 (q=xx) has REQUEST_ACK set (bit 1 of fl=xx).  The incoming
ping (labelled PNG) hard-acks the request DATA packet (f=xx exceeds the
sequence number of the DATA packet), causing it to be discarded from the Tx
ring.  The ACK that was requested (labelled REQ, r=xx references the serial
of the DATA packet) comes after the ping, but the sk_buff holding the
timestamp has gone and the RTT sample is lost.

This is particularly noticeable on RPC calls used to probe the service
offered by the peer.  A lot of peers end up with an unknown RTT because we
only ever sent a single RPC.  This confuses the server rotation algorithm.

Fix this by caching the information about the outgoing packet in RTT
calculations in the rxrpc_call struct rather than looking in the Tx ring.

A four-deep buffer is maintained and both REQUEST_ACK-flagged DATA and
PING-ACK transmissions are recorded in there.  When the appropriate
response ACK is received, the buffer is checked for a match and, if found,
an RTT sample is recorded.

If a received ACK refers to a packet with a later serial number than an
entry in the cache, that entry is presumed lost and the entry is made
available to record a new transmission.

ACKs types other than REQUESTED-type and PING-type cause any matching
sample to be cancelled as they don't necessarily represent a useful
measurement.

If there's no space in the buffer on ping/data transmission, the sample
base is discarded.

Fixes: 50235c4b5a2f ("rxrpc: Obtain RTT data by requesting ACKs on DATA packets")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rxrpc: Keep the ACK serial in a var in rxrpc_input_ack()

[ Upstream commit 68528d937dcd675e79973061c1a314db598162d1 ]

Keep the ACK serial number in a variable in rxrpc_input_ack() as it's used
frequently.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: at_hdmac: add missing kfree() call in at_dma_xlate()

[ Upstream commit e097eb7473d9e70da9e03276f61cd392ccb9d79f ]

If memory allocation for 'atslave' succeed, at_dma_xlate() doesn't have a
corresponding kfree() in exception handling. Thus add kfree() for this
function implementation.

Fixes: bbe89c8e3d59 ("at_hdmac: move to generic DMA binding")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20200817115728.1706719-4-yukuai3@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: at_hdmac: add missing put_device() call in at_dma_xlate()

[ Upstream commit 3832b78b3ec2cf51e07102f9b4480e343459b20f ]

If of_find_device_by_node() succeed, at_dma_xlate() doesn't have a
corresponding put_device(). Thus add put_device() to fix the exception
handling for this function implementation.

Fixes: bbe89c8e3d59 ("at_hdmac: move to generic DMA binding")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20200817115728.1706719-3-yukuai3@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: at_hdmac: check return value of of_find_device_by_node() in at_dma_xlate()

[ Upstream commit 0cef8e2c5a07d482ec907249dbd6687e8697677f ]

The reurn value of of_find_device_by_node() is not checked, thus null
pointer dereference will be triggered if of_find_device_by_node()
failed.

Fixes: bbe89c8e3d59 ("at_hdmac: move to generic DMA binding")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20200817115728.1706719-2-yukuai3@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

batman-adv: bla: use netif_rx_ni when not in interrupt context

[ Upstream commit 279e89b2281af3b1a9f04906e157992c19c9f163 ]

batadv_bla_send_claim() gets called from worker thread context through
batadv_bla_periodic_work(), thus netif_rx_ni needs to be used in that
case. This fixes "NOHZ: local_softirq_pending 08" log messages seen
when batman-adv is enabled.

Fixes: 23721387c409 ("batman-adv: add basic bridge loop avoidance code")
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@haltian.com>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

batman-adv: Fix own OGM check in aggregated OGMs

[ Upstream commit d8bf0c01642275c7dca1e5d02c34e4199c200b1f ]

The own OGM check is currently misplaced and can lead to the following
issues:

For one thing we might receive an aggregated OGM from a neighbor node
which has our own OGM in the first place. We would then not only skip
our own OGM but erroneously also any other, following OGM in the
aggregate.

For another, we might receive an OGM aggregate which has our own OGM in
a place other then the first one. Then we would wrongly not skip this
OGM, leading to populating the orginator and gateway table with ourself.

Fixes: 9323158ef9f4 ("batman-adv: OGMv2 - implement originators logic")
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

batman-adv: Avoid uninitialized chaddr when handling DHCP

[ Upstream commit 303216e76dcab6049c9d42390b1032f0649a8206 ]

The gateway client code can try to optimize the delivery of DHCP packets to
avoid broadcasting them through the whole mesh. But also transmissions to
the client can be optimized by looking up the destination via the chaddr of
the DHCP packet.

But the chaddr is currently only done when chaddr is fully inside the
non-paged area of the skbuff. Otherwise it will not be initialized and the
unoptimized path should have been taken.

But the implementation didn't handle this correctly. It didn't retrieve the
correct chaddr but still tried to perform the TT lookup with this
uninitialized memory.

Reported-by: syzbot+ab16e463b903f5a37036@syzkaller.appspotmail.com
Fixes: 6c413b1c22a2 ("batman-adv: send every DHCP packet as bat-unicast")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Acked-by: Antonio Quartulli <a@unstable.cc>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: of-dma: Fix of_dma_router_xlate's of_dma_xlate handling

[ Upstream commit 5b2aa9f918f6837ae943557f8cec02c34fcf80e7 ]

of_dma_xlate callback can return ERR_PTR as well NULL in case of failure.

If error code is returned (not NULL) then the route should be released and
the router should not be registered for the channel.

Fixes: 56f13c0d9524c ("dmaengine: of_dma: Support for DMA routers")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20200806104928.25975-1-peter.ujfalusi@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fsldma: fix very broken 32-bit ppc ioread64 functionality

[ Upstream commit 0a4c56c80f90797e9b9f8426c6aae4c0cf1c9785 ]

Commit ef91bb196b0d ("kernel.h: Silence sparse warning in
lower_32_bits") caused new warnings to show in the fsldma driver, but
that commit was not to blame: it only exposed some very incorrect code
that tried to take the low 32 bits of an address.

That made no sense for multiple reasons, the most notable one being that
that code was intentionally limited to only 32-bit ppc builds, so "only
low 32 bits of an address" was completely nonsensical.  There were no
high bits to mask off to begin with.

But even more importantly fropm a correctness standpoint, turning the
address into an integer then caused the subsequent address arithmetic to
be completely wrong too, and the "+1" actually incremented the address
by one, rather than by four.

Which again was incorrect, since the code was reading two 32-bit values
and trying to make a 64-bit end result of it all.  Surprisingly, the
iowrite64() did not suffer from the same odd and incorrect model.

This code has never worked, but it's questionable whether anybody cared:
of the two users that actually read the 64-bit value (by way of some C
preprocessor hackery and eventually the 'get_cdar()' inline function),
one of them explicitly ignored the value, and the other one might just
happen to work despite the incorrect value being read.

This patch at least makes it not fail the build any more, and makes the
logic superficially sane.  Whether it makes any difference to the code
_working_ or not shall remain a mystery.

Compile-tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xen/xenbus: Fix granting of vmalloc'd memory

[ Upstream commit d742db70033c745e410523e00522ee0cfe2aa416 ]

On some architectures (like ARM), virt_to_gfn cannot be used for
vmalloc'd memory because of its reliance on virt_to_phys. This patch
introduces a check for vmalloc'd addresses and obtains the PFN using
vmalloc_to_pfn in that case.

Signed-off-by: Simon Leiner <simon@leiner.me>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Link: https://lore.kernel.org/r/20200825093153.35500-1-simon@leiner.me
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: Fix memleak in amdgpu_dm_mode_config_init

[ Upstream commit b67a468a4ccef593cd8df6a02ba3d167b77f0c81 ]

When amdgpu_display_modeset_create_props() fails, state and
state->context should be freed to prevent memleak. It's the
same when amdgpu_dm_audio_init() fails.

Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: Retry AUX write when fail occurs

[ Upstream commit ef67d792a2fc578319399f605fbec2f99ecc06ea ]

[Why]
In dm_dp_aux_transfer() now, we forget to handle AUX_WR fail cases. We
suppose every write wil get done successfully and hence some AUX
commands might not sent out indeed.

[How]
Check if AUX_WR success. If not, retry it.

Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: Keep current gain when ABM disable immediately

[ Upstream commit cba4b52e431e5de3d8012281cfe194f1c39a9052 ]

[Why]
When system enters s3/s0i3, backlight PWM would set user level.

[How]
ABM disable function add keep current gain to avoid it.

Signed-off-by: Brandon Syu <Brandon.Syu@amd.com>
Reviewed-by: Josip Pavic <Josip.Pavic@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: Fix passive dongle mistaken as active dongle in EDID emulation

[ Upstream commit efbde23a3b0164cef27fd394e7d548f46af5b51d ]

[Why]
dongle_type is set during dongle connection but for passive dongles,
dongle_type is not set. If user starts with an active dongle and
then switches to a passive dongle, it will still report as an active
dongle. Trying to emulate the wrong connecter type results in display
not lighting up.

[How]
Set dpcd_caps.dongle_type for passive dongles in detect_dp().

Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Reviewed-by: Joshua Aberback <Joshua.Aberback@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: Revert HDCP disable sequence change

[ Upstream commit b61f05622ace5b9498ae279cdfd1c9f0c1ce3f75 ]

[Why]
Revert HDCP disable sequence change that blanks stream before
disabling HDCP. PSP and HW teams are currently investigating the
root cause of why HDCP cannot be disabled before stream blank,
which is expected to work without issues.

Signed-off-by: Jaehyun Chung <jaehyun.chung@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drivers: gpu: amd: Initialize amdgpu_dm_backlight_caps object to 0 in amdgpu_dm_update_backlight_caps

[ Upstream commit 5896585512e5156482335e902f7c7393b940da51 ]

In `amdgpu_dm_update_backlight_caps()`, there is a local
`amdgpu_dm_backlight_caps` object that is filled in by
`amdgpu_acpi_get_backlight_caps()`. However, this object is
uninitialized before the call and hence the subsequent check for
aux_support can fail since it is not initialized by
`amdgpu_acpi_get_backlight_caps()` as well. This change initializes
this local `amdgpu_dm_backlight_caps` object to 0.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Furquan Shaikh <furquan@google.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: Reject overlay plane configurations in multi-display scenarios

[ Upstream commit 168f09cdadbd547c2b202246ef9a8183da725f13 ]

[Why]
These aren't stable on some platform configurations when driving
multiple displays, especially on higher resolution.

In particular the delay in asserting p-state and validating from
x86 outweights any power or performance benefit from the hardware
composition.

Under some configurations this will manifest itself as extreme stutter
or unresponsiveness especially when combined with cursor movement.

[How]
Disable these for now. Exposing overlays to userspace doesn't guarantee
that they'll be able to use them in any and all configurations and it's
part of the DRM contract to have userspace gracefully handle validation
failures when they occur.

Valdiation occurs as part of DC and this in particular affects RV, so
disable this in dcn10_global_validation.

Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: should check error using DC_OK

[ Upstream commit ed9ab229fea24cbcab17f484297dc8344afb7ea9 ]

core_link_read_dpcd returns only DC_OK(1) and DC_ERROR_UNEXPECTED(-1),
the caller should check error using DC_OK instead of checking against 0

Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390: don't trace preemption in percpu macros

[ Upstream commit 1196f12a2c960951d02262af25af0bb1775ebcc2 ]

Since commit a21ee6055c30 ("lockdep: Change hardirq{s_enabled,_context}
to per-cpu variables") the lockdep code itself uses percpu variables. This
leads to recursions because the percpu macros are calling preempt_enable()
which might call trace_preempt_on().

Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nbd: restore default timeout when setting it to zero

[ Upstream commit acb19e17c5134dd78668c429ecba5b481f038e6a ]

If we configured io timeout of nbd0 to 100s. Later after we
finished using it, we configured nbd0 again and set the io
timeout to 0. We expect it would timeout after 30 seconds
and keep retry. But in fact we could not change the timeout
when we set it to 0. the timeout is still the original 100s.

So change the timeout to default 30s when we set it to zero.
It also behaves same as commit 2da22da57348 ("nbd: fix zero
cmd timeout handling v2").

It becomes more important if we were reconfigure a nbd device
and the io timeout it set to zero. Because it could take 30s
to detect the new socket and thus io could be completed more
quickly compared to 100s.

Signed-off-by: Hou Pu <houpu@bytedance.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cpuidle: Fixup IRQ state

[ Upstream commit 49d9c5936314e44d314c605c39cce0fd947f9c3a ]

Match the pattern elsewhere in this file.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Marco Elver <elver@google.com>
Link: https://lkml.kernel.org/r/20200821085348.251340558@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

irqchip/ingenic: Leave parent IRQ unmasked on suspend

[ Upstream commit 821fc9e261f3af235752f46e59084467cfd440c4 ]

All the wakeup sources we possibly want will go through the interrupt
controller, so the parent IRQ must not be masked during suspend, or
there won't be any way to wake up the system.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200819180602.136969-1-paul@crapouillou.net
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/omap: fix incorrect lock state

[ Upstream commit 7fd5b25499bcec157dd4de9a713425efcf4571cd ]

After commit 92cc68e35863c1c61c449efa2b2daef6e9926048 ("drm/vblank: Use
spin_(un)lock_irq() in drm_crtc_vblank_on()") omapdrm locking is broken:

WARNING: inconsistent lock state
5.8.0-rc2-00483-g92cc68e35863 #13 Tainted: G        W
--------------------------------
inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-W} usage.
swapper/0/0 [HC1[1]:SC0[0]:HE0:SE1] takes:
ea98222c (&dev->event_lock#2){?.+.}-{2:2}, at: drm_handle_vblank+0x4c/0x520 [drm]
{HARDIRQ-ON-W} state was registered at:
  trace_hardirqs_on+0x9c/0x1ec
  _raw_spin_unlock_irq+0x20/0x58
  omap_crtc_atomic_enable+0x54/0xa0 [omapdrm]
  drm_atomic_helper_commit_modeset_enables+0x218/0x270 [drm_kms_helper]
  omap_atomic_commit_tail+0x48/0xc4 [omapdrm]
  commit_tail+0x9c/0x190 [drm_kms_helper]
  drm_atomic_helper_commit+0x154/0x188 [drm_kms_helper]
  drm_client_modeset_commit_atomic+0x228/0x268 [drm]
  drm_client_modeset_commit_locked+0x60/0x1d0 [drm]
  drm_client_modeset_commit+0x24/0x40 [drm]
  drm_fb_helper_restore_fbdev_mode_unlocked+0x54/0xa8 [drm_kms_helper]
  drm_fb_helper_set_par+0x2c/0x5c [drm_kms_helper]
  drm_fb_helper_hotplug_event.part.0+0xa0/0xbc [drm_kms_helper]
  drm_kms_helper_hotplug_event+0x24/0x30 [drm_kms_helper]
  output_poll_execute+0x1a8/0x1c0 [drm_kms_helper]
  process_one_work+0x268/0x800
  worker_thread+0x30/0x4e0
  kthread+0x164/0x190
  ret_from_fork+0x14/0x20

The reason for this is that omapdrm calls drm_crtc_vblank_on() while
holding event_lock taken with spin_lock_irq().

It is not clear why drm_crtc_vblank_on() and drm_crtc_vblank_get() are
called while holding event_lock. I don't see any problem with moving
those calls outside the lock, which is what this patch does.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200819103021.440288-1-tomi.valkeinen@ti.com
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: iproc: Fix shifting 31 bits

[ Upstream commit 0204081128d582965e9e39ca83ee6e4f7d27142b ]

Fix undefined behaviour in the iProc I2C driver by using 'BIT' marcro.

Reported-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Ray Jui <ray.jui@broadcom.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
[wsa: in commit msg, don't say 'checkpatch' but name the issue]
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ceph: don't allow setlease on cephfs

[ Upstream commit 496ceaf12432b3d136dcdec48424312e71359ea7 ]

Leases don't currently work correctly on kcephfs, as they are not broken
when caps are revoked. They could eventually be implemented similarly to
how we did them in libcephfs, but for now don't allow them.

[ idryomov: no need for simple_nosetlease() in ceph_dir_fops and
  ceph_snapdir_fops ]

Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hv_utils: drain the timesync packets on onchannelcallback

[ Upstream commit b46b4a8a57c377b72a98c7930a9f6969d2d4784e ]

There could be instances where a system stall prevents the timesync
packets to be consumed. And this might lead to more than one packet
pending in the ring buffer. Current code empties one packet per callback
and it might be a stale one. So drain all the packets from ring buffer
on each callback.

Signed-off-by: Vineeth Pillai <viremana@linux.microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20200821152849.99517-1-viremana@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hv_utils: return error if host timesysnc update is stale

[ Upstream commit 90b125f4cd2697f949f5877df723a0b710693dd0 ]

If for any reason, host timesync messages were not processed by
the guest, hv_ptp_gettime() returns a stale value and the
caller (clock_gettime, PTP ioctl etc) has no means to know this
now. Return an error so that the caller knows about this.

Signed-off-by: Vineeth Pillai <viremana@linux.microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20200821152523.99364-1-viremana@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gfs2: add some much needed cleanup for log flushes that fail

[ Upstream commit 462582b99b6079a6fbcdfc65bac49f5c2a27cfff ]

When a log flush fails due to io errors, it signals the failure but does
not clean up after itself very well. This is because buffers are added to
the transaction tr_buf and tr_databuf queue, but the io error causes
gfs2_log_flush to bypass the "after_commit" functions responsible for
dequeueing the bd elements. If the bd elements are added to the ail list
before the error, function ail_drain takes care of dequeueing them.
But if they haven't gotten that far, the elements are forgotten and
make the transactions unable to be freed.

This patch introduces new function trans_drain which drains the bd
elements from the transaction so they can be freed properly.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/a6xx: fix gmu start on newer firmware

[ Upstream commit f5749d6181fa7df5ae741788e5d96f593d3a60b6 ]

New Qualcomm firmware has changed a way it reports back the 'started'
event. Support new register values.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

habanalabs: check correct vmalloc return code

[ Upstream commit 0839152f8c1efc1cc2d515d1ff1e253ca9402ad3 ]

vmalloc can return different return code than NULL and a valid
pointer. We must validate it in order to dereference a non valid
pointer.

Signed-off-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

habanalabs: validate FW file size

[ Upstream commit bce382a8bb080ed5f2f3a06754526dc58b91cca2 ]

We must validate FW size in order not to corrupt memory in case
a malicious FW file will be present in system.

Signed-off-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

habanalabs: set max power according to card type

[ Upstream commit 58361aae4b0eed388680a89ac153d27177f40510 ]

In Gaudi, the default max power setting is different between PCI and PMC
cards. Therefore, the driver need to set the default after knowing what is
the card type.

The current code has a bug where it limits the maximum power of the PMC
card to 200W after a reset occurs.

Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

habanalabs: proper handling of alloc size in coresight

[ Upstream commit 36545279f076afeb77104f5ffeab850da3b6d107 ]

Allocation size can go up to 64bit but truncated to 32bit,
we should make sure it is not truncated and validate no address
overflow.

Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

habanalabs: set clock gating according to mask

[ Upstream commit f44d23b9095abd91dad9f5f3add2a3149833ec83 ]

Once clock gating is set we enable clock gating according to mask,
we should also disable clock gating according to relevant bits.

Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

habanalabs: validate packet id during CB parse

[ Upstream commit bc75be24fa88ef10eecaff2b2a9ada8189e5ab5d ]

During command buffer parsing, driver extracts packet id
from user buffer. Driver must validate this packet id, since it is
being used in order to extract information from internal structures.

Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

habanalabs: unmap PCI bars upon iATU failure

[ Upstream commit f1aae40e8dbd2655e3b10cae381a1e8292b19d57 ]

In case the driver fails to configure the PCI controller iATU, it needs to
unmap the PCI bars before exiting so if the driver is removed, the bars
won't be left mapped.

Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm: enable vblank during atomic commits

[ Upstream commit 43906812eaab06423f56af5cca9a9fcdbb4ac454 ]

This has roughly the same effect as drm_atomic_helper_wait_for_vblanks(),
basically just ensuring that vblank accounting is enabled so that we get
valid timestamp/seqn on pageflip events.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Tested-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvmet: Disable keep-alive timer when kato is cleared to 0h

[ Upstream commit 0d3b6a8d213a30387b5104b2fb25376d18636f23 ]

Based on nvme spec, when keep alive timeout is set to zero
the keep-alive timer should be disabled.

Signed-off-by: Amit Engel <amit.engel@dell.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hwmon: (applesmc) check status earlier.

[ Upstream commit cecf7560f00a8419396a2ed0f6e5d245ccb4feac ]

clang static analysis reports this representative problem

applesmc.c:758:10: warning: 1st function call argument is an
  uninitialized value
        left = be16_to_cpu(*(__be16 *)(buffer + 6)) >> 2;
               ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

buffer is filled by the earlier call

ret = applesmc_read_key(LIGHT_SENSOR_LEFT_KEY, ...

This problem is reported because a goto skips the status check.
Other similar problems use data from applesmc_read_key before checking
the status.  So move the checks to before the use.

Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Henrik Rydberg <rydberg@bitmath.org>
Link: https://lore.kernel.org/r/20200820131932.10590-1-trix@redhat.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm: add shutdown support for display platform_driver

[ Upstream commit 9d5cbf5fe46e350715389d89d0c350d83289a102 ]

Define shutdown callback for display drm driver,
so as to disable all the CRTCS when shutdown
notification is received by the driver.

This change will turn off the timing engine so
that no display transactions are requested
while mmu translations are getting disabled
during reboot sequence.

Signed-off-by: Krishna Manikandan <mkrishn@codeaurora.org>
Changes in v2:
- Remove NULL check from msm_pdev_shutdown (Stephen Boyd)
- Change commit text to reflect when this issue
  was uncovered (Sai Prakash Ranjan)

Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tty: serial: qcom_geni_serial: Drop __init from qcom_geni_console_setup

[ Upstream commit 975efc66d4e654207c17f939eb737ac591ac38fe ]

When booting with heavily modularized config, the serial console
may not be able to load until after init when modules that
satisfy needed dependencies have time to load.

Unfortunately, as qcom_geni_console_setup is marked as __init,
the function may have been freed before we get to run it,
causing boot time crashes such as:

[    6.469057] Unable to handle kernel paging request at virtual address ffffffe645d4e6cc
[    6.481623] Mem abort info:
[    6.484466]   ESR = 0x86000007
[    6.487557]   EC = 0x21: IABT (current EL), IL = 32 bits
[    6.492929]   SET = 0, FnV = 0g
[    6.496016]   EA = 0, S1PTW = 0
[    6.499202] swapper pgtable: 4k pages, 39-bit VAs, pgdp=000000008151e000
[    6.501286] ufshcd-qcom 1d84000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[3, 3], lane[2, 2], pwr[FAST MODE, FAST MODE], rate = 2
[    6.505977] [ffffffe645d4e6cc] pgd=000000017df9f003, p4d=000000017df9f003, pud=000000017df9f003, pmd=000000017df9c003, pte=0000000000000000
[    6.505990] Internal error: Oops: 86000007 [#1] PREEMPT SMP
[    6.505995] Modules linked in: zl10353 zl10039 zl10036 zd1301_demod xc5000 xc4000 ves1x93 ves1820 tuner_xc2028 tuner_simple tuner_types tua9001 tua6100 1
[    6.506152]  isl6405
[    6.518104] ufshcd-qcom 1d84000.ufshc: ufshcd_find_max_sup_active_icc_level: Regulator capability was not set, actvIccLevel=0
[    6.530549]  horus3a helene fc2580 fc0013 fc0012 fc0011 ec100 e4000 dvb_pll ds3000 drxk drxd drx39xyj dib9000 dib8000 dib7000p dib7000m dib3000mc dibx003
[    6.624271] CPU: 7 PID: 148 Comm: kworker/7:2 Tainted: G        W       5.8.0-mainline-12021-g6defd37ba1cd #3455
[    6.624273] Hardware name: Thundercomm Dragonboard 845c (DT)
[    6.624290] Workqueue: events deferred_probe_work_func
[    6.624296] pstate: 40c00005 (nZcv daif +PAN +UAO BTYPE=--)
[    6.624307] pc : qcom_geni_console_setup+0x0/0x110
[    6.624316] lr : try_enable_new_console+0xa0/0x140
[    6.624318] sp : ffffffc010843a30
[    6.624320] x29: ffffffc010843a30 x28: ffffffe645c3e7d0
[    6.624325] x27: ffffff80f8022180 x26: ffffffc010843b28
[    6.637937] x25: 0000000000000000 x24: ffffffe6462a2000
[    6.637941] x23: ffffffe646398000 x22: 0000000000000000
[    6.637945] x21: 0000000000000000 x20: ffffffe6462a5ce8
[    6.637952] x19: ffffffe646398e38 x18: ffffffffffffffff
[    6.680296] x17: 0000000000000000 x16: ffffffe64492b900
[    6.680300] x15: ffffffe6461e9d08 x14: 69202930203d2064
[    6.680305] x13: 7561625f65736162 x12: 202c363331203d20
[    6.696434] x11: 0000000000000030 x10: 0101010101010101
[    6.696438] x9 : 4d4d20746120304d x8 : 7f7f7f7f7f7f7f7f
[    6.707249] x7 : feff4c524c787373 x6 : 0000000000008080
[    6.707253] x5 : 0000000000000000 x4 : 8080000000000000
[    6.707257] x3 : 0000000000000000 x2 : ffffffe645d4e6cc
[    6.744223] qcom_geni_serial 898000.serial: dev_pm_opp_set_rate: failed to find OPP for freq 102400000 (-34)
[    6.744966] x1 : fffffffefe74e174 x0 : ffffffe6462a5ce8
[    6.753580] qcom_geni_serial 898000.serial: dev_pm_opp_set_rate: failed to find OPP for freq 102400000 (-34)
[    6.761634] Call trace:
[    6.761639]  qcom_geni_console_setup+0x0/0x110
[    6.761645]  register_console+0x29c/0x2f8
[    6.767981] Bluetooth: hci0: Frame reassembly failed (-84)
[    6.775252]  uart_add_one_port+0x438/0x500
[    6.775258]  qcom_geni_serial_probe+0x2c4/0x4a8
[    6.775266]  platform_drv_probe+0x58/0xa8
[    6.855359]  really_probe+0xec/0x398
[    6.855362]  driver_probe_device+0x5c/0xb8
[    6.855367]  __device_attach_driver+0x98/0xb8
[    7.184945]  bus_for_each_drv+0x74/0xd8
[    7.188825]  __device_attach+0xec/0x148
[    7.192705]  device_initial_probe+0x24/0x30
[    7.196937]  bus_probe_device+0x9c/0xa8
[    7.200816]  deferred_probe_work_func+0x7c/0xb8
[    7.205398]  process_one_work+0x20c/0x4b0
[    7.209456]  worker_thread+0x48/0x460
[    7.213157]  kthread+0x14c/0x158
[    7.216432]  ret_from_fork+0x10/0x18
[    7.220049] Code: bad PC value
[    7.223139] ---[ end trace 73f3b21e251d5a70 ]---

Thus this patch removes the __init avoiding crash in such
configs.

Cc: Andy Gross <agross@kernel.org>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: Saravana Kannan <saravanak@google.com>
Cc: Todd Kjos <tkjos@google.com>
Cc: Amit Pundir <amit.pundir@linaro.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: linux-serial@vger.kernel.org
Suggested-by: Saravana Kannan <saravanak@google.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20200811025044.70626-1-john.stultz@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/dpu: fix unitialized variable error

[ Upstream commit 35c719da95c0d28560bff7bafeaf07ebb212665e ]

 drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c:817 dpu_crtc_enable() error: uninitialized symbol 'request_bandwidth'.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/dpu: Fix scale params in plane validation

[ Upstream commit 4c978caf08aa155bdeadd9e2d4b026d4ce97ebd0 ]

Plane validation uses an API drm_calc_scale which will
return src/dst value as a scale ratio.

when viewing the range on a scale the values should fall in as

Upscale ratio < Unity scale < Downscale ratio for src/dst formula

Fix the min and max scale ratios to suit the API accordingly.

Signed-off-by: Kalyan Thota <kalyan_t@codeaurora.org>
Tested-by: Kristian H. Kristensen <hoegsberg@google.com>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/dpu: Fix reservation failures in modeset

[ Upstream commit ccc862b957c6413b008fbe458034372847992d7f ]

In TEST_ONLY commit, rm global_state will duplicate the
object and request for new reservations, once they pass
then the new state will be swapped with the old and will
be available for the Atomic Commit.

This patch fixes some of missing links in the resource
reservation sequence mentioned above.

1) Creation of duplicate state in test_only commit (Rob)
2) Allocate and release the resources on every modeset.
3) Avoid allocation only when active is false.

In a modeset operation, swap state happens well before
disable. Hence clearing reservations in disable will
cause failures in modeset enable.

Allow reservations to be cleared/allocated before swap,
such that only newly committed resources are pushed to HW.

Changes in v1:
 - Move the rm release to atomic_check.
 - Ensure resource allocation and free happens when active
   is not changed i.e only when mode is changed.(Rob)

Changes in v2:
 - Handle dpu_kms_get_global_state API failure as it may
   return EDEADLK (swboyd).

Signed-off-by: Kalyan Thota <kalyan_t@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: quirks: Always poll three more Lenovo PixArt mice

[ Upstream commit 627a49975bdc3220f360a8237603a6344ee6a588 ]

The PixArt OEM mice are known for disconnecting every minute in
runlevel 1 or 3 if they are not always polled. One Lenovo PixArt
mouse is already fixed. Got two references for 17ef:602e and three
references for 17ef:6019 misbehaving like this. Got one direct bug
report for 17ef:6093 from Wyatt Ward (wyatt8740). So add
HID_QUIRK_ALWAYS_POLL for all of them.

Link: https://github.com/sriemer/fix-linux-mouse
Signed-off-by: Sebastian Parschauer <s.parschauer@gmx.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hwmon: (pmbus/isl68137) remove READ_TEMPERATURE_1 telemetry for RAA228228

[ Upstream commit 51fb91ed5a6fa855a74731610cd5435d83d6e17f ]

Per the RAA228228 datasheet, READ_TEMPERATURE_1 is not a supported PMBus
command.

Signed-off-by: Grant Peltier <grantpeltier93@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Linux 5.8.7

Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: target: tcmu: Optimize use of flush_dcache_page

commit 3c58f737231e2c8cbf543a09d84d8c8e80e05e43 upstream.

(scatter|gather)_data_area() need to flush dcache after writing data to or
before reading data from a page in uio data area.  The two routines are
able to handle data transfer to/from such a page in fragments and flush the
cache after each fragment was copied by calling the wrapper
tcmu_flush_dcache_range().

That means:

1) flush_dcache_page() can be called multiple times for the same page.

2) Calling flush_dcache_page() indirectly using the wrapper does not make
   sense, because each call of the wrapper is for one single page only and
   the calling routine already has the correct page pointer.

Change (scatter|gather)_data_area() such that, instead of calling
tcmu_flush_dcache_range() before/after each memcpy, it now calls
flush_dcache_page() before unmapping a page (when writing is complete for
that page) or after mapping a page (when starting to read the page).

After this change only calls to tcmu_flush_dcache_range() for addresses in
vmalloc'ed command ring are left over.

The patch was tested on ARM with kernel 4.19.118 and 5.7.2

Link: https://lore.kernel.org/r/20200618131632.32748-2-bstroesser@ts.fujitsu.com
Tested-by: JiangYu <lnsyyj@hotmail.com>
Tested-by: Daniel Meyerholt <dxm523@gmail.com>
Acked-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Bodo Stroesser <bstroesser@ts.fujitsu.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nl80211: fix NL80211_ATTR_HE_6GHZ_CAPABILITY usage

commit fce2ff728f95b8894db14f51c9274dc56c37616f upstream.

In nl80211_set_station(), we check NL80211_ATTR_HE_6GHZ_CAPABILITY
and then use NL80211_ATTR_HE_CAPABILITY, which is clearly wrong.
Fix this to use NL80211_ATTR_HE_6GHZ_CAPABILITY as well.

Cc: stable@vger.kernel.org
Fixes: 43e64bf301fd ("cfg80211: handle 6 GHz capability of new station")
Link: https://lore.kernel.org/r/20200805153516.310cef625955.I0abc04dc8abb2c7c005c88ef8fa2d0e3c9fb95c4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sdhci: tegra: Remove SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK for Tegra186

commit 391d89dba8c290859a3e29430d0b9e32c358bb0d upstream.

commit 4346b7c7941d ("mmc: tegra: Add Tegra186 support")

SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK is set for Tegra186 from the
beginning of its support in driver.

Tegra186 SDMMC hardware by default uses timeout clock (TMCLK) instead
of SDCLK and this quirk should not be set.

So, this patch remove this quirk for Tegra186.

Fixes: 4346b7c7941d ("mmc: tegra: Add Tegra186 support")
Cc: stable <stable@vger.kernel.org> # 5.4
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Link: https://lore.kernel.org/r/1598548861-32373-3-git-send-email-skomatineni@nvidia.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sdhci: tegra: Remove SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK for Tegra210

commit e33588adcaa925c18ee2ea253161fb0317fa2329 upstream.

commit b5a84ecf025a ("mmc: tegra: Add Tegra210 support")

SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK is set for Tegra210 from the
beginning of Tegra210 support in the driver.

Tegra210 SDMMC hardware by default uses timeout clock (TMCLK)
instead of SDCLK and this quirk should not be set.

So, this patch remove this quirk for Tegra210.

Fixes: b5a84ecf025a ("mmc: tegra: Add Tegra210 support")
Cc: stable <stable@vger.kernel.org> # 5.4
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Link: https://lore.kernel.org/r/1598548861-32373-2-git-send-email-skomatineni@nvidia.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: tegra: Add missing timeout clock to Tegra210 SDMMC

commit 679f71fa0db2d777f39c7a5af7f7c0689fc713fa upstream.

commit 742af7e7a0a1 ("arm64: tegra: Add Tegra210 support")

Tegra210 uses separate SDMMC_LEGACY_TM clock for data timeout and
this clock is not enabled currently which is not recommended.

Tegra SDMMC advertises 12Mhz as timeout clock frequency in host
capability register.

So, this clock should be kept enabled by SDMMC driver.

Fixes: 742af7e7a0a1 ("arm64: tegra: Add Tegra210 support")
Cc: stable <stable@vger.kernel.org> # 5.4
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Link: https://lore.kernel.org/r/1598548861-32373-5-git-send-email-skomatineni@nvidia.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: tegra: Add missing timeout clock to Tegra186 SDMMC nodes

commit baba217d2c4446b6eef309d81d8776cb5c68cb55 upstream.

commit 39cb62cb8973 ("arm64: tegra: Add Tegra186 support")

Tegra186 uses separate SDMMC_LEGACY_TM clock for data timeout and
this clock is not enabled currently which is not recommended.

Tegra186 SDMMC advertises 12Mhz as timeout clock frequency in host
capability register and uses it by default.

So, this clock should be kept enabled by the SDMMC driver.

Fixes: 39cb62cb8973 ("arm64: tegra: Add Tegra186 support")
Cc: stable <stable@vger.kernel.org> # 5.4
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Link: https://lore.kernel.org/r/1598548861-32373-6-git-send-email-skomatineni@nvidia.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: tegra: Add missing timeout clock to Tegra194 SDMMC nodes

commit c956c0cd4f6f4aac4f095621b1c4e1c5ee1df877 upstream.

commit 5425fb15d8ee ("arm64: tegra: Add Tegra194 chip device tree")

Tegra194 uses separate SDMMC_LEGACY_TM clock for data timeout and
this clock is not enabled currently which is not recommended.

Tegra194 SDMMC advertises 12Mhz as timeout clock frequency in host
capability register.

So, this clock should be kept enabled by SDMMC driver.

Fixes: 5425fb15d8ee ("arm64: tegra: Add Tegra194 chip device tree")
Cc: stable <stable@vger.kernel.org> # 5.4
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Link: https://lore.kernel.org/r/1598548861-32373-7-git-send-email-skomatineni@nvidia.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dt-bindings: mmc: tegra: Add tmclk for Tegra210 and later

commit f7f86e8ac0ad7cd6792a80137f5a550924966916 upstream.

commit b5a84ecf025a ("mmc: tegra: Add Tegra210 support")

Tegra210 and later uses separate SDMMC_LEGACY_TM clock for data
timeout.

So, this patch adds "tmclk" to Tegra sdhci clock property in the
device tree binding.

Fixes: b5a84ecf025a ("mmc: tegra: Add Tegra210 support")
Cc: stable <stable@vger.kernel.org> # 5.4
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Link: https://lore.kernel.org/r/1598548861-32373-4-git-send-email-skomatineni@nvidia.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: arm64: Survive synchronous exceptions caused by AT instructions

commit 88a84ccccb3966bcc3f309cdb76092a9892c0260 upstream.

KVM doesn't expect any synchronous exceptions when executing, any such
exception leads to a panic(). AT instructions access the guest page
tables, and can cause a synchronous external abort to be taken.

The arm-arm is unclear on what should happen if the guest has configured
the hardware update of the access-flag, and a memory type in TCR_EL1 that
does not support atomic operations. B2.2.6 "Possible implementation
restrictions on using atomic instructions" from DDI0487F.a lists
synchronous external abort as a possible behaviour of atomic instructions
that target memory that isn't writeback cacheable, but the page table
walker may behave differently.

Make KVM robust to synchronous exceptions caused by AT instructions.
Add a get_user() style helper for AT instructions that returns -EFAULT
if an exception was generated.

While KVM's version of the exception table mixes synchronous and
asynchronous exceptions, only one of these can occur at each location.

Re-enter the guest when the AT instructions take an exception on the
assumption the guest will take the same exception. This isn't guaranteed
to make forward progress, as the AT instructions may always walk the page
tables, but guest execution may use the translation cached in the TLB.

This isn't a problem, as since commit 5dcd0fdbb492 ("KVM: arm64: Defer guest
entry when an asynchronous exception is pending"), KVM will return to the
host to process IRQs allowing the rest of the system to keep running.

Cc: stable@vger.kernel.org # <v5.3: 5dcd0fdbb492 ("KVM: arm64: Defer guest entry when an asynchronous exception is pending")
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: arm64: Add kvm_extable for vaxorcism code

commit e9ee186bb735bfc17fa81dbc9aebf268aee5b41e upstream.

KVM has a one instruction window where it will allow an SError exception
to be consumed by the hypervisor without treating it as a hypervisor bug.
This is used to consume asynchronous external abort that were caused by
the guest.

As we are about to add another location that survives unexpected exceptions,
generalise this code to make it behave like the host's extable.

KVM's version has to be mapped to EL2 to be accessible on nVHE systems.

The SError vaxorcism code is a one instruction window, so has two entries
in the extable. Because the KVM code is copied for VHE and nVHE, we end up
with four entries, half of which correspond with code that isn't mapped.

Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: media/v4l2-core: Fix kernel-infoleak in video_put_user()

commit 4ffb879ea648c2b42da4ca992ed3db87e564af69 upstream.

video_put_user() is copying uninitialized stack memory to userspace due
to the compiler not initializing holes in the structures declared on the
stack. Fix it by initializing `ev32` and `vb32` using memset().

Reported-and-tested-by: syzbot+79d751604cb6f29fbf59@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?extid=79d751604cb6f29fbf59
Cc: stable@vger.kernel.org
Fixes: 1a6c0b36dd19 ("media: v4l2-core: fix VIDIOC_DQEVENT for time64 ABI")
Fixes: 577c89b0ce72 ("media: v4l2-core: fix v4l2_buffer handling for time64 ABI")
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf record/stat: Explicitly call out event modifiers in the documentation

commit e48a73a312ebf19cc3d72aa74985db25c30757c1 upstream.

Event modifiers are not mentioned in the perf record or perf stat
manpages.  Add them to orient new users more effectively by pointing
them to the perf list manpage for details.

Fixes: 2055fdaf8703 ("perf list: Document precise event sampling for AMD IBS")
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tony Jones <tonyj@suse.de>
Cc: stable@vger.kernel.org
Link: http://lore.kernel.org/lkml/20200901215853.276234-1-kim.phillips@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests/x86/test_vsyscall: Improve the process_vm_readv() test

commit 8891adc61dce2a8a41fc0c23262b681c3ec4b73a upstream.

The existing code accepted process_vm_readv() success or failure as long
as it didn't return garbage.  This is too weak: if the vsyscall page is
readable, then process_vm_readv() should succeed and, if the page is not
readable, then it should fail.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: x86@kernel.org
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Jann Horn <jannh@google.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: fix pin vs. gup mismatch with gate pages

commit 9fa2dd946743ae6f30dc4830da19147bf100a7f2 upstream.

Gate pages were missed when converting from get to pin_user_pages().
This can lead to refcount imbalances.  This is reliably and quickly
reproducible running the x86 selftests when vsyscall=emulate is enabled
(the default).  Fix by using try_grab_page() with appropriate flags
passed.

The long story:

Today, pin_user_pages() and get_user_pages() are similar interfaces for
manipulating page reference counts.  However, "pins" use a "bias" value
and manipulate the actual reference count by 1024 instead of 1 used by
plain "gets".

That means that pin_user_pages() must be matched with unpin_user_pages()
and can't be mixed with a plain put_user_pages() or put_page().

Enter gate pages, like the vsyscall page.  They are pages usually in the
kernel image, but which are mapped to userspace.  Userspace is allowed
access to them, including interfaces using get/pin_user_pages().  The
refcount of these kernel pages is manipulated just like a normal user
page on the get/pin side so that the put/unpin side can work the same
for normal user pages or gate pages.

get_gate_page() uses try_get_page() which only bumps the refcount by
1, not 1024, even if called in the pin_user_pages() path.  If someone
pins a gate page, this happens:

pin_user_pages()
get_gate_page()
try_get_page() // bump refcount +1
... some time later
unpin_user_pages()
page_ref_sub_and_test(page, 1024))

... and boom, we get a refcount off by 1023.  This is reliably and
quickly reproducible running the x86 selftests when booted with
vsyscall=emulate (the default).  The selftests use ptrace(), but I
suspect anything using pin_user_pages() on gate pages could hit this.

To fix it, simply use try_grab_page() instead of try_get_page(), and
pass 'gup_flags' in so that FOLL_PIN can be respected.

This bug traces back to the very beginning of the FOLL_PIN support in
commit 3faa52c03f44 ("mm/gup: track FOLL_PIN pages"), which showed up in
the 5.7 release.

Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Fixes: 3faa52c03f44 ("mm/gup: track FOLL_PIN pages")
Reported-by: Peter Zijlstra <peterz@infradead.org>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: Andy Lutomirski <luto@kernel.org>
Cc: x86@kernel.org
Cc: Jann Horn <jannh@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: nft_set_rbtree: Handle outcomes of tree rotations in overlap detection

commit 226a88de473e475cb9f993682a1c7d0c2b451ad8 upstream.

Checks for partial overlaps on insertion assume that end elements
are always descendant nodes of their corresponding start, because
they are inserted later. However, this is not the case if a
previous delete operation caused a tree rotation as part of
rebalancing.

Taking the issue reported by Andreas Fischer as an example, if we
omit delete operations, the existing procedure works because,
equivalently, we are inserting a start item with value 40 in the
this region of the red-black tree with single-sized intervals:

                                  overlap flag
                   10 (start)
                  /  \            false
                      20 (start)
                     /  \         false
                         30 (start)
                        /  \      false
                            60 (start)
                           /  \   false
                         50 (end)
                        /  \      false
                      20 (end)
                     /  \         false
                         40 (start)

if we now delete interval 30 - 30, the tree can be rearranged in
a way similar to this (note the rotation involving 50 - 50):

                                  overlap flag
                   10 (start)
                  /  \            false
                      20 (start)
                     /  \         false
                         25 (start)
                        /  \      false
                            70 (start)
                           /  \   false
                         50 (end)
                        /  \      true (from rule a1.)
                      50 (start)
                     /  \         true
                   40 (start)

and we traverse interval 50 - 50 from the opposite direction
compared to what was expected.

To deal with those cases, add a start-before-start rule, b4.,
that covers traversal of existing intervals from the right.

We now need to restrict start-after-end rule b3. to cases
where there are no occurring nodes between existing start and
end elements, because addition of rule b4. isn't sufficient to
ensure that the pre-existing end element we encounter while
descending the tree corresponds to a start element of an
interval that we already traversed entirely.

Different types of overlap detection on trees with rotations
resulting from re-balancing will be covered by nft test case
sets/0044interval_overlap_1.

Reported-by: Andreas Fischer <netfilter@d9c.eu>
Bugzilla: https://bugzilla.netfilter.org/show_bug.cgi?id=1449
Cc: <stable@vger.kernel.org> # 5.6.x
Fixes: 7c84d41416d8 ("netfilter: nft_set_rbtree: Detect partial overlaps on insertion")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: core: Sanitize event code and type when mapping input

commit 35556bed836f8dc07ac55f69c8d17dce3e7f0e25 upstream.

When calling into hid_map_usage(), the passed event code is
blindly stored as is, even if it doesn't fit in the associated bitmap.

This event code can come from a variety of sources, including devices
masquerading as input devices, only a bit more "programmable".

Instead of taking the event code at face value, check that it actually
fits the corresponding bitmap, and if it doesn't:
- spit out a warning so that we know which device is acting up
- NULLify the bitmap pointer so that we catch unexpected uses

Code paths that can make use of untrusted inputs can now check
that the mapping was indeed correct and bail out if not.

Cc: stable@vger.kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: core: Correctly handle ReportSize being zero

commit bce1305c0ece3dc549663605e567655dd701752c upstream.

It appears that a ReportSize value of zero is legal, even if a bit
non-sensical. Most of the HID code seems to handle that gracefully,
except when computing the total size in bytes. When fed as input to
memset, this leads to some funky outcomes.

Detect the corner case and correctly compute the size.

Cc: stable@vger.kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 5.8.6

Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: usb-audio: Update documentation comment for MS2109 quirk

commit 74a2a7de81a2ef20732ec02087314e92692a7a1b upstream.

As the recent fix addressed the channel swap problem more properly,
update the comment as well.

Fixes: 1b7ecc241a67 ("ALSA: usb-audio: work around streaming quirk for MacroSilicon MS2109")
Signed-off-by: Hector Martin <marcan@marcan.st>
Link: https://lore.kernel.org/r/20200816084431.102151-1-marcan@marcan.st
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dma-pool: Fix an uninitialized variable bug in atomic_pool_expand()

commit 892fc9f6835ecf075efac20789b012c5c9997fcc upstream.

The "page" pointer can be used with out being initialized.

Fixes: d7e673ec2c8e ("dma-pool: Only allocate from CMA when in same memory zone")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/vmwgfx/ldu: Use drm_mode_config_reset

commit 981243371a5d832af5bc572071172e955d02fe88 upstream.

Same problem as in stdu, same fix.

Fixes: 51f644b40b4b ("drm/atomic-helper: reset vblank on crtc reset")
Acked-by: Charmaine Lee <charmainel@vmware.com>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Signed-off-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/vmwgfx/sou: Use drm_mode_config_reset

commit 1338441cf166e2ef789af5915b961d4e13a4ec31 upstream.

Same problem as in stdu, same fix.

Fixes: 51f644b40b4b ("drm/atomic-helper: reset vblank on crtc reset")
Acked-by: Charmaine Lee <charmainel@vmware.com>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Signed-off-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>