drm/amd/display: 3.2.253

This version brings along the following:

- Fix incorrect odm change detection logic
- Add primary pipe check when building slice table for dcn3x
- Add get primary dpp pipe resource interface
- Add missing function pointer for DCN321 resource
- Rename DisableMinDispClkODM in dc_config
- Break after finding supported vlevel for repopulate
- Update OPP counter from new interface
- Augment display clock in dc_cap structure
- Improve code style on bios_parser2
- Skip audio config for virtual signal
- Block MPO if it prevents pstate support
- Fix DP2.0 timing sync
- Improve x86 and dmub ips handshake
- Remove guaranteed viewports limitation for odm
- Add new windowed mpo odm minimal transition sequence
- Reset stream slice count for new ODM policy
- Determine fast update only before commit minimal transition state
- Remove unused mmhub_reg_offsets

Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix incorrect odm change detection logic

[why]
The current ODM change detection only compares first two ODM slices.
If there are 4 ODM slices and the change is within the last two slices, the
logic fails to detect ODM change and cause us to skip ODM programming
unexpectedly.

[how]
Add a is ODM topology changed resource interface to check any ODM
topology changes with a more generic method.

Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: add primary pipe check when building slice table for dcn3x

[why]
There is a corner use case where the same plane pointer can be added into
dc state twice. In addition to plane state pointer check we also need to match
primary pipe before identifying the same plane.

Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: add get primary dpp pipe resource interface

[why]
Need to have a helper function to find the primary dp pipe of the plane
associated with a dpp pipe

Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: add missing function pointer for DCN321 resource

[why]
acquire_free_pipe_as_secondary_opp_head function pointer is not
assigned. This causes ODM mode to be disabled after enabling
windowed MPO ODM capability on DCN321.

[how]
assign the correct function to the function pointer.

Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Rename DisableMinDispClkODM in dc_config

[what and why]
The logic for DisableMinDispClkODM is reversed now that odm is
disabled by default. Renaming to EnableMinDispClkODM.

Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Gabe Teeger <gabe.teeger@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/vpe: fix truncation warnings

Fix truncation warnings.

Fixes: 9d4346bdbc64 ("drm/amdgpu: add VPE 6.1.0 support")
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202309200028.aUVuM8os-lkp@intel.com
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Improve code style on bios_parser2

bios_parser2 uses space instead of tabs in multiple areas; this commit
converts those spaces into tabs. It also removes some other small
details.

Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Remove unwanted drm edid references

[WHY]
edid_override and drm_edid_override_connector_update, according to drm
documentation, should not be referred outside drm_edid.

[HOW]
Remove and replace them accordingly. This can tested by IGT's
kms_hdmi_inject test.

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: switch DC over to the new DRM logging macros

For multi-GPU systems it is difficult to tell which GPU a particular
message is being printed for and that is undesirable because it
complicates debugging efforts. Also, the new macros allow us to enable
logging for particular parts of the codebase more selectively (since we
no longer need to throw everything at DRM_DEBUG_KMS()). So, for the
reasons outlined above we should switch to the new macros.

We can accomplish this by using the existing DC_LOGGER code to pass
around the relevant `struct drm_device` which will be fed to the new
macros in logger_types.h. Also, we must get rid of all instances of the
DC_LOG_.*() functions that are currently in amdgpu_dm since we don't use
the DC logger there and we can simply refer to the macros directly
there instead.

Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: skip audio config for virtual signal

[WHY & HOW]
IGT's kms_hdmi_inject (subtest inject_audio) triggers a warning message
from dce_aud_az_configure. This can be fixed by checking Virtual signal
that does not need to configure AZ audio since it does not have any.

Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: Add reset option for fan_curve on smu13_0_0

Add reset option for fan_curve.
User can use command "echo r > fan_cure" to reset the fan_curve
to boot value

Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: block MPO if it prevents pstate support

This change adds a method to block mpo when it would cause us to
exit pstate support. We should block mpo by default where MPO
causes issues by preventing pstate change.

Reviewed-by: Jun Lei <jun.lei@amd.com>
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix DP2.0 timing sync

[Why]
Triggering OTG sync before all OTG/HPO clock programming is complete
causes timing sync to fail and a subsequent P-state hang.

[How]
Move DTB clock programming earlier in the sequence to
enable_stream_timing.

Reviewed-by: Ariel Bernstein <eric.bernstein@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Ilya Bakoulin <ilya.bakoulin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Improve x86 and dmub ips handshake

[Why]
There is a race condition between x86 and dmcub fw when attempting to exit
IPS2. Scenarios including exiting IPS2 before IPS2 has been entered. This
can cause unexpected hang when DMCUB attempt to exit while PMFW still
tries to enter IPS2.

[How]
A new design has been introduced to remove race conditions and improve the
handshake between x86 and DMCUB. An AON scratch register is borrowed from
PMFW to determine whether DMCUB has committed to IPS entry or not.

In the case when dmcub has committed IPS entry, x86 must poll until an exit
event occurred either from DMCUB(IPS1) or PMFW(IPS2). x86 will wait
upperbound of evaluation and IPS entry time to ensure IPS2 exit event has
been sent to PMFW.

Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Duncan Ma <duncan.ma@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: remove guaranteed viewports limitation for odm

[why]
With the more generic hw minimal state transition sequence,
this limitation has been overcome.

Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: add new windowed mpo odm minimal transition sequence

[why]
We do not have a programming sequence to support seamless transition
between MPC combine to ODM combine when plane count remains the same.
This can happen with windowed MPO ODM use cases when plane scaling
is changed over ODM Combine's capability.

[How]
We are adding a programming sequence specifically to handle the transition
between MPC combine and ODM combine during plane scaling change.

Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: reset stream slice count for new ODM policy

[why]
ODM combine could prevent us from supporting more planes
we will reset ODM slice count back to 1 when all planes have
been removed to maximize the amount of planes supported when
new planes are added.

[how]
reset ODM slice count when all planes are removed.

Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: determine fast update only before commit minimal transition state

[why]
commit minimal transition state would update current
state to new state with surface and stream update
applied. If we determine fast update only after we
have committed the minimal transition state based on
new state, we will skip committing the full new state.

[how]
determine fast update only earlier based on the
actaul currents state. Only skip full commit when
the transition between actual current state and new
state is fast update only.

Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: remove unused mmhub_reg_offsets

[Why & How]
mmhub_reg_offsets never used in code. Remove it.

Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: fix some race conditions in vram buffer alloc/free of svm code

This patch fixes:
1: ref number of prange's svm_bo got decreased by an async call from hmm. When
wait svm_bo of prange got released we shoul also wait prang->svm_bo become NULL,
otherwise prange->svm_bo may be set to null after allocate new vram buffer.

2: During waiting svm_bo of prange got released in a while loop should reschedule
current task to give other tasks oppotunity to run, specially the the workque
task that handles svm_bo ref release, otherwise we may enter to softlock.

Signed-off-by: Xiaogang.Chen <xiaogang.chen@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Move dma unmapping after TLB flush

Otherwise GPU may access the stale mapping and generate IOMMU
IO_PAGE_FAULT.

Move this to inside p->mutex to prevent multiple threads mapping and
unmapping concurrently race condition.

After kfd_mem_dmaunmap_attachment is removed from unmap_bo_from_gpuvm,
kfd_mem_dmaunmap_attachment is called if failed to map to GPUs, and
before free the mem attachment in case failed to unmap from GPUs.

Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: further move TLB hw workarounds a layer up

For the PASID flushing we already handled that at a higher layer, apply
those workarounds to the standard flush as well.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: rework lock handling for flush_tlb v2

Instead of each implementation doing this more or less correctly
move taking the reset lock at a higher level.

v2: fix typo

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: drop error return from flush_gpu_tlb_pasid

That function never fails, drop the error return.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix and cleanup gmc_v11_0_flush_gpu_tlb_pasid

The same PASID can be used by more than one VMID, reset each of them.

Use the common KIQ handling.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: cleanup gmc_v10_0_flush_gpu_tlb_pasid

The same PASID can be used by more than one VMID, reset each of them.

Use the common KIQ handling.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix and cleanup gmc_v9_0_flush_gpu_tlb_pasid

Testing for reset is pointless since the reset can start right after the
test.

The same PASID can be used by more than one VMID, invalidate each of them.

Move the KIQ and all the workaround handling into common GMC code.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix and cleanup gmc_v8_0_flush_gpu_tlb_pasid

Testing for reset is pointless since the reset can start right after the
test. Grab the reset semaphore instead.

The same PASID can be used by more than once VMID, build a mask of VMIDs
to invalidate instead of just restting the first one.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Shashank Sharma <shashank.sharma@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix and cleanup gmc_v7_0_flush_gpu_tlb_pasid

Testing for reset is pointless since the reset can start right after the
test. Grab the reset semaphore instead.

The same PASID can be used by more than once VMID, build a mask of VMIDs
to invalidate instead of just restting the first one.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Shashank Sharma <shashank.sharma@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: cleanup gmc_v11_0_flush_gpu_tlb

Remove leftovers from copying this from the gmc v10 code.

v2: squash in fix from Yifan

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: rework gmc_v10_0_flush_gpu_tlb v2

Move the SDMA workaround necessary for Navi 1x into a higher layer.

v2: use dev_err

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: change if condition for bad channel bitmap update

The amdgpu_ras_eeprom_control.bad_channel_bitmap is u32 type, but the
channel index could be larger than 32. For the ASICs whose channel
number is more than 32, the amdgpu_dpm_send_hbm_bad_channel_flag
interface is not supported, so we simply bypass channel bitmap update under
this condition.

v2: replace sizeof with BITS_PER_TYPE, we should check bit number
instead of byte number.

Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix value of some UMC parameters for UMC v12

Prepare for bad page retirement.

Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: add unique_id for gc 11.0.3

add unique_id for gc 11.0.3

Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix some style issues

Fixes a few style issues:
- Only calculate the dto_params and dp_hpo_inst when dccg is present.
- Fix indentation
- Drop empty else block

Fixes: 7f7925e25828 ("drm/amd/display: Fix MST recognizes connected displays as one")
Cc: Muhammad Ahmed <ahmed.ahmed@amd.com>
Cc: Michel Dänzer <michel@daenzer.net>
Cc: Stylon Wang <stylon.wang@amd.com>
Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Don't use sw fault filter if retry cam enabled

If retry cam enabled, we don't use sw retry fault filter and add fault
into sw filter ring, so we shouldn't remove fault from sw filter.

Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix and cleanup gmc_v9_0_flush_gpu_tlb

The KIQ code path was ignoring the second flush. Also avoid long lines and
re-calculating the register offsets over and over again.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

gpu: drm: amd: display: fix kernel-doc warnings

Fix kernel-doc warnings discovered in AMD gpu display driver.
Fixes these warnings:
./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:110: warning:
Function parameter or member 'overlap_only'
not described in 'mpcc_blnd_cfg'.

./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:110: warning:
Function parameter or member 'bottom_gain_mode'
not described in 'mpcc_blnd_cfg'.

./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:110: warning:
Function parameter or member 'background_color_bpc'
not described in 'mpcc_blnd_cfg'.

./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:110:
warning: Function parameter or member 'top_gain'
not described in 'mpcc_blnd_cfg'.

./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:110:
warning: Function parameter or member 'bottom_inside_gain'
not described in 'mpcc_blnd_cfg'.

./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:110:
warning: Function parameter or member 'bottom_outside_gain'
not described in 'mpcc_blnd_cfg'.

Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Swarup Laxman Kotiaklapudi <swarupkotikalapudi@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Increase IH soft ring size for GFX v9.4.3 dGPU

On GFX v9.4.3 dGPU, applications have random timeout failure when XNACK
on, dmesg log has "amdgpu: IH soft ring buffer overflow 0x900, 0x900",
because dGPU mode has 272 cam entries. After increasing IH soft ring
to 512 entries, no more IH soft ring overflow message and application
passed.

Fixes: bf80d34b6c58 ("drm/amdgpu: Increase soft IH ring size")
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Restore partition mode after reset

On a full device reset, PSP FW gets unloaded. Hence restore the
partition mode by placing a new request.

Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Tested-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: 3.2.252

This version brings along the following:

- Use optc32 instead of optc30 in DC
- Optimize OLED T7 delay
- Multiple fixes for MST, register mas, and others
- Update driver and IPS interop
- Improve z8 watermark mask
- DCN35 updates
- Enable replay for DCN35
- Temporarily disable clock gating

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Drop unused link FPGA code

There are multiple parts of the code that DC does not use anymore, and
this commit drops those dead codes.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Enable DCN low mem power by default

Enable DCN low mem power by default.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Muhammad Ahmed <ahmed.ahmed@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Expand DML to better support replay

Update with extended blank Vstartup adjustment for replay.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Muhammad Ahmed <ahmed.ahmed@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Use optc32 instead of optc30 in DC

Change DC to use optc32, which uses REG_UPDATE instead of REG_SET.
REG_SET clears OTG_H_TIMING_DIV_MODE_MANUAL which must be set to 1 in
some specific HDMI configurations.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Optimize OLED T7 delay

[Why]
Driver doesn't need T7 delay for OLED panels, since it doesn't control
power sequence.

[How]
This delay can be skipped to optimize resume times.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Swapnil Patel <swapnil.patel@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Remove svm range validated_once flag

The validated_once flag is not used after the prefault was removed, The
prefault was needed to ensure validate all system memory pages at least
once before mapping or migrating the range to GPU.

Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add more fields to IP version

Include subrevision and variant fileds also to IP version.

Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: print channel index for UMC bad page

Print channel index for UMC v12.

Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Separate dma unmap and free of dma address array operations

We do not need free dma address array of svm_range each time we do dma unmap
for pages in svm_range as we can reuse the same array. Only free it when free
svm_range. Separate these two operations and use them accordingly.

Signed-off-by: Xiaogang Chen <xiaogang.chen@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: Remove SMUv13.0.6 unsupported feature

Selectively updating feature mask is not supported in SMU v13.0.6.
Remove the callback corresponding to that.

Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: Round Q10 format values in SMU v13.0.6

Instead of neglecting fractional part, round the Q10 format values in
SMU v13.0.6 metrics table.

Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: update IP count INFO query

update the query to return the number of functional
instances where there is more than an instance of the requested
type and for others continue to return one.

v2: count must reflect the actual number of engines (Alex)
v3: fix wrong number of engines for vcn (Alex)

Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix false positive error log

It should first check block ras obj whether be set, it should
return 0 directly if block ras obj or hw_ops is not set.
If block doesn't support RAS just return 0 is fine.

Changed from V1:
return 0 directly if block ras obj or hw ops is not set

Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/jpeg: skip set pg for sriov

Host handles PG.

Signed-off-by: Vignesh Chander <Vignesh.Chander@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Use gpu_offset for user queue's wptr

Directly use tbo's start address will miss the domain start offset. Need
to use gpu_offset instead.

Signed-off-by: YuBiao Wang <YuBiao.Wang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: 3.2.251

Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: [FW Promotion] Release 0.0.183.0

- Add new IPS ALLOW masks
- Add new Replay power configuration options

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Anthony Koo <anthony.koo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix MST recognizes connected displays as one

MST now recognizes both connected displays

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Muhammad Ahmed <ahmed.ahmed@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix some non-initialized register mask and setting

Fix some non-initialized register mask and update golden setting.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Duncan Ma <duncan.ma@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Enable replay for dcn35

Enable the display replay feature for DCN35.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add option to flip ODM optimization

Add a config option to disable odm dispclk optimization for debug
purpose.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Gabe Teeger <gabe.teeger@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: disable IPS

Disable IPS by default till it is ready.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Duncan Ma <duncan.ma@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Muhammad Ahmed <ahmed.ahmed@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add IPS control flag

[why]
Currently, driver is not aware if IPS is supported. After PMFW helps
implement new message query functionality, driver will set IPS
capability flag.

[how]
Create new SMU hook function to query IPS capability. Based on the cap,
set appropriate flags to false for power-gating purposes. This will
avoid keeping SMU busy and offloading tasks to DMUB/driver.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Sung Joon Kim <sungkim@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Update driver and IPS interop

[Why]
Two issues fixed:

1. Currently, driver does not allow idle prior to PSR entry. Once
   PSR1+IPS is enabled, there is intermittent hang due to DCN access
from IrqMgr during IPS2.

2. Driver is sending multiple commands to PMFW and dmcub to exit IPS
   even during IPS0.

[How]
1. Set driver allow optimization prior to entering PSR mode with the
   condition for eDP display only.  Unregister all interrupts before
   allowing driver idle and re-register interrupts when exiting from
   idle. This will prevent IrqMgr to access DCN during IPS2.

2. Block sending PMFW and dmcub exit low power state commands when
   driver is not in idle state.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Jun Lei <jun.lei@amd.com>
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Duncan Ma <duncan.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Correct z8 watermark mask

Correct z8_watermark mask from 16bit to 20bit. Also, do not set dcn35
dprefclk in clk_mgr_construct.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Muhammad Ahmed <ahmed.ahmed@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: STREAM_MAPPER_CONTROL register offset on DCN35

[Why]
The STREAM_MAPPER_CONTROL register offset was left uninitialized,
causing warning in the driver log at runtime

[How]
A temporary solution to add it into dcn35_create_resource_pool.

[TODO]
Remove duplication between SE_DCN35_REG_LIST_RI in dcn35_resource.h and
SE_DCN35_REG_LIST in dcn35_dio_stream_encoder.h

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Artem Grishin <artem.grishin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Update pipe resource interfaces for DCN35

Pipe resource interfaces were changed.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add DPIA Link Encoder Assignment Fix for DCN35

For DPIA we should have preferred DIG assignment based on DPIA selected
as per the ASIC design

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: George Shen <george.shen@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Mustapha Ghaddar <mghaddar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix static screen detection setting for DCN35

set_static_screen_control has been updated for DCN3 series. Update it
for DCN35.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Anthony Koo <anthony.koo@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Sung-huai Wang <danny.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add pointer check before function call

Call to immediate_disable_crtc was not checked before calling, exposing
a potential null pointer hang.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Sung Joon Kim <sungkim@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Enable DCLK_DS from driver by default

PMFW ungate this feature, this can be enabled now

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Muhammad Ahmed <ahmed.ahmed@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add DCN35 case for dc_clk_mgr_create

Add DCN 35 case for dc_clk_mgr_create.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add z8_marks related in dml for DCN35

Add z8 watermarks to struct for DCN35.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix dig register undefined

[Why]
Some of the stream encoder registers have register offset address 0. It
is causing no display in some scenarios due to DIG_FE was not setup
correctly and was not enabled.

[How]
Fix stream encoder register define list.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Duncan Ma <duncan.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix the ability to use lower resolution modes on eDP

On eDP we can receive invalid modes from dm_update_crtc_state() for
entirely new streams for which drm_mode_set_crtcinfo() shouldn't be
called on. So, instead of calling drm_mode_set_crtcinfo() from within
create_stream_for_sink() we can instead call it from
amdgpu_dm_connector_mode_valid(). Since, we are guaranteed to only call
drm_mode_set_crtcinfo() for valid modes from that function (invalid
modes are rejected by that callback) and that is the only user
of create_validate_stream_for_sink() that we need to call
drm_mode_set_crtcinfo() for (as before commit cb841d27b876
("drm/amd/display: Always pass connector_state to stream validation"),
that is the only place where create_validate_stream_for_sink()'s
dm_state was NULL).

Cc: stable@vger.kernel.org
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2693
Fixes: cb841d27b876 ("drm/amd/display: Always pass connector_state to stream validation")
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Temporarily disable clock gating

Temporarily disable dchubbub clock gating, registers:
.DISPCLK_R_DCHUBBUB_GATE_DIS
.DCFCLK_R_DCHUBBUB_GATE_DIS

need to follow up with sequence issue.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Leo Chen <sanchuan.chen@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: disable clock gating logic

Disable clock gating logic.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Muhammad Ahmed <ahmed.ahmed@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add reset for SYMCLKC_FE_SRC_SEL

To prevent confusion after symclk has already been disabled.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Taimur Hassan <syed.hassan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Rework coredump to use memory dynamically

Instead of storing coredump information inside amdgpu_device struct,
move if to a proper separated struct and allocate it dynamically. This
will make it easier to further expand the logged information.

Signed-off-by: André Almeida <andrealmeid@igalia.com>
Reviewed-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Remove unused display_content_support

This was never filled in and thus never truly used.

Checking the EDID for content_type support is not required for sending
the avi infoframe packet.

v2:
- rebase to amd-staging-drm-next

Reviewed-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Joshua Ashton <joshua@froggi.es>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Hook up 'content type' property for HDMI

Implements the 'content type' property for HDMI connectors.
Verified by checking the avi infoframe on a connected TV.

This also simplifies a lot of the code in that area as well, there were
a lot of temp variables doing very little and unnecessary logic
that was quite confusing.

It is not necessary to check for support in the EDID before sending a
'content type' value in the avi infoframe also.

v2:
- rebase to amd-staging-drm-next
- mark CRTC state for reset if content_type differs

Reviewed-by: Harry Wentland <harry.wentland@amd.com> (v1)
Signed-off-by: Joshua Ashton <joshua@froggi.es>
Co-developed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix a memory leak in amdgpu_ras_feature_enable

This patch fixes a memory leak in the amdgpu_ras_feature_enable() function.
The leak occurs when the function sends a command to the firmware to enable
or disable a RAS feature for a GFX block. If the command fails, the kfree()
function is not called to free the info memory.

Fixes: 9f051d6ff13f ("drm/amdgpu: Free ras cmd input buffer properly")
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Cong Liu <liucong2@kylinos.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix vbios version string search

Search for vbios version string in STRING_OFFSET-ATOM_ROM_HEADER region
first. If those offsets are not populated, use the hardcoded region.

Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Revert "drm/amdgpu: Report vbios version instead of PN"

This reverts commit 7748ce5b69581325cae40c2134088820f0957902.

vbios_version sysfs node is used to identify Part Number also. Revert to
the same so that it doesn't break scripts/software which parse this.

Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: add smu_13_0_6 mca dump support

v1:
implement smu_v13_0_6 mca bank interface.

v2:
- remove unnecessary lock
- move MCMP1_* macros to mp_13_0_6_sh_mask.h file

Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: update smu_v13_0_6 ppsmc header

update smu header to support mca dump interface.

Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add EXT_COHERENT memory allocation flags

These flags (for GEM and SVM allocations) allocate
memory that allows for system-scope atomic semantics.

On GFX943 these flags cause caches to be avoided on
non-local memory.

On all other ASICs they are identical in functionality to the
equivalent COHERENT flags.

Corresponding Thunk patch is at
https://github.com/RadeonOpenCompute/ROCT-Thunk-Interface/pull/88

Reviewed-by: David Yat Sin <David.YatSin@amd.com>
Signed-off-by: David Francis <David.Francis@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: fix add queue process context clear without runtime enable

There are cases where HSA runtime is not enabled through the
AMDKFD_IOC_RUNTIME_ENABLE call when adding queues and the MES ADD_QUEUE
API should clear the MES process context instead of SET_SHADER_DEBUGGER.
Such examples are legacy HSA runtime builds that do not support the
current exception handling and running KFD tests.

The only time ADD_QUEUE.skip_process_ctx_clear is required is for
debugger use cases where a debugged process is always runtime enabled
when adding a queue.

Tested-by: Shikai Guo <shikai.guo@amd.com>
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Acked-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Eric Huang <jinhuieric.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add amdgpu mca debug sysfs support

add amdgpu mca debug sysfs support.

Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add VPE IP discovery info to HW IP info query

Add missing IP discovery info.

Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Lang Yu <lang.yu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add amdgpu smu mca dump feature support

add amdgpu smu mca dump feature support.

Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Documentation/amdgpu: Modify pp_dpm_*clk details

pp_dpm_*clk nodes also could show the frequencies when a clock is in
'sleep' state. Add documentation related to that.

Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd: Enable seamless boot by default on newer ASICs

Seamless boot can technically be supported as far back as DCN1
but to avoid regressions on older hardware, enable it for DCN3 and
later.

If users report using the module parameter that it works on older
ASICs as well, this can be adjusted.

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd: Add a module parameter for seamless boot

The module parameter can be used to test more easily enabling seamless
boot support on additional ASICs.

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd: Add HDP flush during jpeg init

During jpeg init, CPU writes to frame buffer which can be cached by HDP,
occasionally causing invalid header to be sent to MMSCH.  Perform HDP flush
after writing to frame buffer before continuing with jpeg init sequence.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timmy Tsai <timmtsai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd: Move seamless boot check out of display

This will allow base driver to dictate whether seamless should be
enabled.  No intended functional changes.

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd: Drop special case for yellow carp without discovery

`amdgpu_gmc_get_vbios_allocations` has a special case for how to
bring up yellow carp when amdgpu discovery is turned off. As this ASIC
ships with discovery turned on, it's generally dead code and worse it
causes `adev->mman.keep_stolen_vga_memory` to not be initialized for
yellow carp.

Remove it.

Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm:Fix GFX deep sleep clock reporting

For SMU v13.0.6, keep GFX deep sleep clock reporting style consistent
with that of other clocks. Sample format below.

S: 78Mhz *
0: 600Mhz
1: 800Mhz

Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>