Guilherme G. Piccoli [Fri, 9 Sep 2022 20:07:55 +0000 (17:07 -0300)]
firmware: google: Test spinlock on panic path to avoid lockups
[ Upstream commit
3e081438b8e639cc76ef1a5ce0c1bd8a154082c7 ]
Currently the gsmi driver registers a panic notifier as well as
reboot and die notifiers. The callbacks registered are called in
atomic and very limited context - for instance, panic disables
preemption and local IRQs, also all secondary CPUs (not executing
the panic path) are shutdown.
With that said, taking a spinlock in this scenario is a dangerous
invitation for lockup scenarios. So, fix that by checking if the
spinlock is free to acquire in the panic notifier callback - if not,
bail-out and avoid a potential hang.
Fixes:
74c5b31c6618 ("driver: Google EFI SMI")
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: David Gow <davidgow@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Julius Werner <jwerner@chromium.org>
Cc: Petr Mladek <pmladek@suse.com>
Reviewed-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Link: https://lore.kernel.org/r/20220909200755.189679-1-gpiccoli@igalia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Nam Cao [Mon, 12 Sep 2022 17:04:31 +0000 (19:04 +0200)]
staging: vt6655: fix some erroneous memory clean-up loops
[ Upstream commit
2a2db520e3ca5aafba7c211abfd397666c9b5f9d ]
In some initialization functions of this driver, memory is allocated with
'i' acting as an index variable and increasing from 0. The commit in
"Fixes" introduces some clean-up codes in case of allocation failure,
which free memory in reverse order with 'i' decreasing to 0. However,
there are some problems:
- The case i=0 is left out. Thus memory is leaked.
- In case memory allocation fails right from the start, the memory
freeing loops will start with i=-1 and invalid memory locations will
be accessed.
One of these loops has been fixed in commit
c8ff91535880 ("staging:
vt6655: fix potential memory leak"). Fix the remaining erroneous loops.
Link: https://lore.kernel.org/linux-staging/Yx9H1zSpxmNqx6Xc@kadam/
Fixes:
5341ee0adb17 ("staging: vt6655: check for memory allocation failures")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Signed-off-by: Nam Cao <namcaov@gmail.com>
Link: https://lore.kernel.org/r/20220912170429.29852-1-namcaov@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dongliang Mu [Wed, 14 Sep 2022 05:13:33 +0000 (13:13 +0800)]
phy: qualcomm: call clk_disable_unprepare in the error handling
[ Upstream commit
c3966ced8eb8dc53b6c8d7f97d32cc8a2107d83e ]
Smatch reports the following error:
drivers/phy/qualcomm/phy-qcom-usb-hsic.c:82 qcom_usb_hsic_phy_power_on()
warn: 'uphy->cal_clk' from clk_prepare_enable() not released on lines:
58.
drivers/phy/qualcomm/phy-qcom-usb-hsic.c:82 qcom_usb_hsic_phy_power_on()
warn: 'uphy->cal_sleep_clk' from clk_prepare_enable() not released on
lines: 58.
drivers/phy/qualcomm/phy-qcom-usb-hsic.c:82 qcom_usb_hsic_phy_power_on()
warn: 'uphy->phy_clk' from clk_prepare_enable() not released on lines:
58.
Fix this by calling proper clk_disable_unprepare calls.
Fixes:
0b56e9a7e835 ("phy: Group vendor specific phy drivers")
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20220914051334.69282-1-dzm91@hust.edu.cn
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sherry Sun [Tue, 20 Sep 2022 11:17:03 +0000 (19:17 +0800)]
tty: serial: fsl_lpuart: disable dma rx/tx use flags in lpuart_dma_shutdown
[ Upstream commit
316ae95c175a7d770d1bfe4c011192712f57aa4a ]
lpuart_dma_shutdown tears down lpuart dma, but lpuart_flush_buffer can
still occur which in turn tries to access dma apis if lpuart_dma_tx_use
flag is true. At this point since dma is torn down, these dma apis can
abort. Set lpuart_dma_tx_use and the corresponding rx flag
lpuart_dma_rx_use to false in lpuart_dma_shutdown so that dmas are not
accessed after they are relinquished.
Otherwise, when try to kill btattach, kernel may panic. This patch may
fix this issue.
root@imx8ulpevk:~# btattach -B /dev/ttyLP2 -S 115200
^C[ 90.182296] Internal error: synchronous external abort:
96000210 [#1] PREEMPT SMP
[ 90.189806] Modules linked in: moal(O) mlan(O)
[ 90.194258] CPU: 0 PID: 503 Comm: btattach Tainted: G O
5.15.32-06136-g34eecdf2f9e4 #37
[ 90.203554] Hardware name: NXP i.MX8ULP 9X9 EVK (DT)
[ 90.208513] pstate:
600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 90.215470] pc : fsl_edma3_disable_request+0x8/0x60
[ 90.220358] lr : fsl_edma3_terminate_all+0x34/0x20c
[ 90.225237] sp :
ffff800013f0bac0
[ 90.228548] x29:
ffff800013f0bac0 x28:
0000000000000001 x27:
ffff000008404800
[ 90.235681] x26:
ffff000008404960 x25:
ffff000008404a08 x24:
ffff000008404a00
[ 90.242813] x23:
ffff000008404a60 x22:
0000000000000002 x21:
0000000000000000
[ 90.249946] x20:
ffff800013f0baf8 x19:
ffff00000559c800 x18:
0000000000000000
[ 90.257078] x17:
0000000000000000 x16:
0000000000000000 x15:
0000000000000000
[ 90.264211] x14:
0000000000000003 x13:
0000000000000000 x12:
0000000000000040
[ 90.271344] x11:
ffff00000600c248 x10:
ffff800013f0bb10 x9 :
ffff000057bcb090
[ 90.278477] x8 :
fffffc0000241a08 x7 :
ffff00000534ee00 x6 :
ffff000008404804
[ 90.285609] x5 :
0000000000000000 x4 :
0000000000000000 x3 :
ffff0000055b3480
[ 90.292742] x2 :
ffff8000135c0000 x1 :
ffff00000534ee00 x0 :
ffff00000559c800
[ 90.299876] Call trace:
[ 90.302321] fsl_edma3_disable_request+0x8/0x60
[ 90.306851] lpuart_flush_buffer+0x40/0x160
[ 90.311037] uart_flush_buffer+0x88/0x120
[ 90.315050] tty_driver_flush_buffer+0x20/0x30
[ 90.319496] hci_uart_flush+0x44/0x90
[ 90.323162] +0x34/0x12c
[ 90.327253] tty_ldisc_close+0x38/0x70
[ 90.331005] tty_ldisc_release+0xa8/0x190
[ 90.335018] tty_release_struct+0x24/0x8c
[ 90.339022] tty_release+0x3ec/0x4c0
[ 90.342593] __fput+0x70/0x234
[ 90.345652] ____fput+0x14/0x20
[ 90.348790] task_work_run+0x84/0x17c
[ 90.352455] do_exit+0x310/0x96c
[ 90.355688] do_group_exit+0x3c/0xa0
[ 90.359259] __arm64_sys_exit_group+0x1c/0x20
[ 90.363609] invoke_syscall+0x48/0x114
[ 90.367362] el0_svc_common.constprop.0+0xd4/0xfc
[ 90.372068] do_el0_svc+0x2c/0x94
[ 90.375379] el0_svc+0x28/0x80
[ 90.378438] el0t_64_sync_handler+0xa8/0x130
[ 90.382711] el0t_64_sync+0x1a0/0x1a4
[ 90.386376] Code:
17ffffda d503201f d503233f f9409802 (
b9400041)
[ 90.392467] ---[ end trace
2f60524b4a43f1f6 ]---
[ 90.397073] note: btattach[503] exited with preempt_count 1
[ 90.402636] Fixing recursive fault but reboot is needed!
Fixes:
6250cc30c4c4 ("tty: serial: fsl_lpuart: Use scatter/gather DMA for Tx")
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Thara Gopinath <tgopinath@microsoft.com>
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Link: https://lore.kernel.org/r/20220920111703.1532-1-sherry.sun@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ilpo Järvinen [Thu, 22 Sep 2022 07:00:05 +0000 (10:00 +0300)]
serial: 8250: Toggle IER bits on only after irq has been set up
[ Upstream commit
039d4926379b1d1c17b51cf21c500a5eed86899e ]
Invoking TIOCVHANGUP on 8250_mid port on Ice Lake-D and then reopening
the port triggers these faults during serial8250_do_startup():
DMAR: DRHD: handling fault status reg 3
DMAR: [DMA Write NO_PASID] Request device [00:1a.0] fault addr 0x0 [fault reason 0x05] PTE Write access is not set
If the IRQ hasn't been set up yet, the UART will have zeroes in its MSI
address/data registers. Disabling the IRQ at the interrupt controller
won't stop the UART from performing a DMA write to the address programmed
in its MSI address register (zero) when it wants to signal an interrupt.
The UARTs (in Ice Lake-D) implement PCI 2.1 style MSI without masking
capability, so there is no way to mask the interrupt at the source PCI
function level, except disabling the MSI capability entirely, but that
would cause it to fall back to INTx# assertion, and the PCI specification
prohibits disabling the MSI capability as a way to mask a function's
interrupt service request.
The MSI address register is zeroed by the hangup as the irq is freed.
The interrupt is signalled during serial8250_do_startup() performing a
THRE test that temporarily toggles THRI in IER. The THRE test currently
occurs before UART's irq (and MSI address) is properly set up.
Refactor serial8250_do_startup() such that irq is set up before the
THRE test. The current irq setup code is intermixed with the timer
setup code. As THRE test must be performed prior to the timer setup,
extract it into own function and call it only after the THRE test.
The ->setup_timer() needs to be part of the struct uart_8250_ops in
order to not create circular dependency between 8250 and 8250_base
modules.
Fixes:
40b36daad0ac ("[PATCH] 8250 UART backup timer")
Reported-by: Lennert Buytenhek <buytenh@arista.com>
Tested-by: Lennert Buytenhek <buytenh@arista.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220922070005.2965-1-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christophe JAILLET [Wed, 28 Apr 2021 07:30:52 +0000 (09:30 +0200)]
serial: 8250: Add an empty line and remove some useless {}
[ Upstream commit
26f7591632d74f637f346f5d642d8ebe6b433fc9 ]
This fixes the following checkpatch.pl warnings:
WARNING: Missing a blank line after declarations
WARNING: braces {} are not necessary for any arm of this statement
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/257ffd691b4a062ad017333c9430d69da6dbd29a.1619594713.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of:
039d4926379b ("serial: 8250: Toggle IER bits on only after irq has been set up")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dan Carpenter [Thu, 22 Sep 2022 11:22:47 +0000 (14:22 +0300)]
drivers: serial: jsm: fix some leaks in probe
[ Upstream commit
1d5859ef229e381f4db38dce8ed58e4bf862006b ]
This error path needs to unwind instead of just returning directly.
Fixes:
03a8482c17dd ("drivers: serial: jsm: Enable support for Digi Classic adapters")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/YyxFh1+lOeZ9WfKO@kili
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Albert Briscoe [Sun, 11 Sep 2022 22:37:55 +0000 (15:37 -0700)]
usb: gadget: function: fix dangling pnp_string in f_printer.c
[ Upstream commit
24b7ba2f88e04800b54d462f376512e8c41b8a3c ]
When opts->pnp_string is changed with configfs, new memory is allocated for
the string. It does not, however, update dev->pnp_string, even though the
memory is freed. When rquesting the string, the host then gets old or
corrupted data rather than the new string. The ieee 1284 id string should
be allowed to change while the device is connected.
The bug was introduced in commit
fdc01cc286be ("usb: gadget: printer:
Remove pnp_string static buffer"), which changed opts->pnp_string from a
char[] to a char*.
This patch changes dev->pnp_string from a char* to a char** pointing to
opts->pnp_string.
Fixes:
fdc01cc286be ("usb: gadget: printer: Remove pnp_string static buffer")
Signed-off-by: Albert Briscoe <albertsbriscoe@gmail.com>
Link: https://lore.kernel.org/r/20220911223753.20417-1-albertsbriscoe@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mario Limonciello [Wed, 21 Sep 2022 12:34:47 +0000 (15:34 +0300)]
xhci: Don't show warning for reinit on known broken suspend
[ Upstream commit
484d6f7aa3283d082c87654b7fe7a7f725423dfb ]
commit
8b328f8002bc ("xhci: re-initialize the HC during resume if HCE was
set") introduced a new warning message when the host controller error
was set and re-initializing.
This is expected behavior on some designs which already set
`xhci->broken_suspend` so the new warning is alarming to some users.
Modify the code to only show the warning if this was a surprising behavior
to the XHCI driver.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216470
Fixes:
8b328f8002bc ("xhci: re-initialize the HC during resume if HCE was set")
Reported-by: Artem S. Tashkinov <aros@gmx.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20220921123450.671459-4-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Daisuke Matsuda [Wed, 21 Sep 2022 08:08:43 +0000 (17:08 +0900)]
IB: Set IOVA/LENGTH on IB_MR in core/uverbs layers
[ Upstream commit
241f9a27e0fc0eaf23e3d52c8450f10648cd11f1 ]
Set 'iova' and 'length' on ib_mr in ib_uverbs and ib_core layers to let all
drivers have the members filled. Also, this commit removes redundancy in
the respective drivers.
Previously, commit
04c0a5fcfcf65 ("IB/uverbs: Set IOVA on IB MR in uverbs
layer") changed to set 'iova', but seems to have missed 'length' and the
ib_core layer at that time.
Fixes:
04c0a5fcfcf65 ("IB/uverbs: Set IOVA on IB MR in uverbs layer")
Signed-off-by: Daisuke Matsuda <matsuda-daisuke@fujitsu.com>
Link: https://lore.kernel.org/r/20220921080844.1616883-1-matsuda-daisuke@fujitsu.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Zhang [Thu, 8 Sep 2022 10:09:02 +0000 (13:09 +0300)]
RDMA/cm: Use SLID in the work completion as the DLID in responder side
[ Upstream commit
b7d95040c13f61a4a6a859c5355faf583eff9658 ]
The responder should always use WC's SLID as the dlid, to follow the
IB SPEC section "13.5.4.2 COMMON RESPONSE ACTIONS":
A responder always takes the following actions in constructing a
response packet:
- The SLID of the received packet is used as the DLID in the response
packet.
Fixes:
ac3a949fb2ff ("IB/CM: Set appropriate slid and dlid when handling CM request")
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Link: https://lore.kernel.org/r/cd17c240231e059d2fc07c17dfe555d548b917eb.1662631201.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Logan Gunthorpe [Thu, 25 Aug 2022 15:46:27 +0000 (09:46 -0600)]
md/raid5: Ensure stripe_fill happens on non-read IO with journal
[ Upstream commit
e2eed85bc75138a9eeb63863d20f8904ac42a577 ]
When doing degrade/recover tests using the journal a kernel BUG
is hit at drivers/md/raid5.c:4381 in handle_parity_checks5():
BUG_ON(!test_bit(R5_UPTODATE, &dev->flags));
This was found to occur because handle_stripe_fill() was skipped
for stripes in the journal due to a condition in that function.
Thus blocks were not fetched and R5_UPTODATE was not set when
the code reached handle_parity_checks5().
To fix this, don't skip handle_stripe_fill() unless the stripe is
for read.
Fixes:
07e83364845e ("md/r5cache: shift complex rmw from read path to write path")
Link: https://lore.kernel.org/linux-raid/e05c4239-41a9-d2f7-3cfa-4aa9d2cea8c1@deltatee.com/
Suggested-by: Song Liu <song@kernel.org>
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Saurabh Sengar [Tue, 23 Aug 2022 18:51:04 +0000 (11:51 -0700)]
md: Replace snprintf with scnprintf
[ Upstream commit
1727fd5015d8f93474148f94e34cda5aa6ad4a43 ]
Current code produces a warning as shown below when total characters
in the constituent block device names plus the slashes exceeds 200.
snprintf() returns the number of characters generated from the given
input, which could cause the expression “200 – len” to wrap around
to a large positive number. Fix this by using scnprintf() instead,
which returns the actual number of characters written into the buffer.
[ 1513.267938] ------------[ cut here ]------------
[ 1513.267943] WARNING: CPU: 15 PID: 37247 at <snip>/lib/vsprintf.c:2509 vsnprintf+0x2c8/0x510
[ 1513.267944] Modules linked in: <snip>
[ 1513.267969] CPU: 15 PID: 37247 Comm: mdadm Not tainted 5.4.0-1085-azure #90~18.04.1-Ubuntu
[ 1513.267969] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.1 05/09/2022
[ 1513.267971] RIP: 0010:vsnprintf+0x2c8/0x510
<-snip->
[ 1513.267982] Call Trace:
[ 1513.267986] snprintf+0x45/0x70
[ 1513.267990] ? disk_name+0x71/0xa0
[ 1513.267993] dump_zones+0x114/0x240 [raid0]
[ 1513.267996] ? _cond_resched+0x19/0x40
[ 1513.267998] raid0_run+0x19e/0x270 [raid0]
[ 1513.268000] md_run+0x5e0/0xc50
[ 1513.268003] ? security_capable+0x3f/0x60
[ 1513.268005] do_md_run+0x19/0x110
[ 1513.268006] md_ioctl+0x195e/0x1f90
[ 1513.268007] blkdev_ioctl+0x91f/0x9f0
[ 1513.268010] block_ioctl+0x3d/0x50
[ 1513.268012] do_vfs_ioctl+0xa9/0x640
[ 1513.268014] ? __fput+0x162/0x260
[ 1513.268016] ksys_ioctl+0x75/0x80
[ 1513.268017] __x64_sys_ioctl+0x1a/0x20
[ 1513.268019] do_syscall_64+0x5e/0x200
[ 1513.268021] entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fixes:
766038846e875 ("md/raid0: replace printk() with pr_*()")
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Acked-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Thu, 28 Jul 2022 07:12:12 +0000 (10:12 +0300)]
mtd: rawnand: meson: fix bit map use in meson_nfc_ecc_correct()
[ Upstream commit
3e4ad3212cf22687410b1e8f4e68feec50646113 ]
The meson_nfc_ecc_correct() function accidentally does a right shift
instead of a left shift so it only works for BIT(0). Also use
BIT_ULL() because "correct_bitmap" is a u64 and we want to avoid
shift wrapping bugs.
Fixes:
8fae856c5350 ("mtd: rawnand: meson: add support for Amlogic NAND flash controller")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Liang Yang <liang.yang@amlogic.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/YuI2zF1hP65+LE7r@kili
Signed-off-by: Sasha Levin <sashal@kernel.org>
Niklas Cassel [Fri, 16 Sep 2022 12:28:35 +0000 (14:28 +0200)]
ata: fix ata_id_has_dipm()
[ Upstream commit
630624cb1b5826d753ac8e01a0e42de43d66dedf ]
ACS-5 section
7.13.6.36 Word 78: Serial ATA features supported
states that:
If word 76 is not 0000h or FFFFh, word 78 reports the features supported
by the device. If this word is not supported, the word shall be cleared
to zero.
(This text also exists in really old ACS standards, e.g. ACS-3.)
The problem with ata_id_has_dipm() is that the while it performs a
check against 0 and 0xffff, it performs the check against
ATA_ID_FEATURE_SUPP (word 78), the same word where the feature bit
is stored.
Fix this by performing the check against ATA_ID_SATA_CAPABILITY
(word 76), like required by the spec. The feature bit check itself
is of course still performed against ATA_ID_FEATURE_SUPP (word 78).
Additionally, move the macro to the other ATA_ID_FEATURE_SUPP macros
(which already have this check), thus making it more likely that the
next ATA_ID_FEATURE_SUPP macro that is added will include this check.
Fixes:
ca77329fb713 ("[libata] Link power management infrastructure")
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Niklas Cassel [Fri, 16 Sep 2022 12:28:34 +0000 (14:28 +0200)]
ata: fix ata_id_has_ncq_autosense()
[ Upstream commit
a5fb6bf853148974dbde092ec1bde553bea5e49f ]
ACS-5 section
7.13.6.36 Word 78: Serial ATA features supported
states that:
If word 76 is not 0000h or FFFFh, word 78 reports the features supported
by the device. If this word is not supported, the word shall be cleared
to zero.
(This text also exists in really old ACS standards, e.g. ACS-3.)
Additionally, move the macro to the other ATA_ID_FEATURE_SUPP macros
(which already have this check), thus making it more likely that the
next ATA_ID_FEATURE_SUPP macro that is added will include this check.
Fixes:
5b01e4b9efa0 ("libata: Implement NCQ autosense")
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Niklas Cassel [Fri, 16 Sep 2022 12:28:33 +0000 (14:28 +0200)]
ata: fix ata_id_has_devslp()
[ Upstream commit
9c6e09a434e1317e09b78b3b69cd384022ec9a03 ]
ACS-5 section
7.13.6.36 Word 78: Serial ATA features supported
states that:
If word 76 is not 0000h or FFFFh, word 78 reports the features supported
by the device. If this word is not supported, the word shall be cleared
to zero.
(This text also exists in really old ACS standards, e.g. ACS-3.)
Additionally, move the macro to the other ATA_ID_FEATURE_SUPP macros
(which already have this check), thus making it more likely that the
next ATA_ID_FEATURE_SUPP macro that is added will include this check.
Fixes:
65fe1f0f66a5 ("ahci: implement aggressive SATA device sleep support")
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Niklas Cassel [Fri, 16 Sep 2022 12:28:32 +0000 (14:28 +0200)]
ata: fix ata_id_sense_reporting_enabled() and ata_id_has_sense_reporting()
[ Upstream commit
690aa8c3ae308bc696ec8b1b357b995193927083 ]
ACS-5 section
7.13.6.41 Words 85..87, 120: Commands and feature sets supported or enabled
states that:
If bit 15 of word 86 is set to one, bit 14 of word 119 is set to one,
and bit 15 of word 119 is cleared to zero, then word 119 is valid.
If bit 15 of word 86 is set to one, bit 14 of word 120 is set to one,
and bit 15 of word 120 is cleared to zero, then word 120 is valid.
(This text also exists in really old ACS standards, e.g. ACS-3.)
Currently, ata_id_sense_reporting_enabled() and
ata_id_has_sense_reporting() both check bit 15 of word 86,
but neither of them check that bit 14 of word 119 is set to one,
or that bit 15 of word 119 is cleared to zero.
Additionally, make ata_id_sense_reporting_enabled() return false
if !ata_id_has_sense_reporting(), similar to how e.g.
ata_id_flush_ext_enabled() returns false if !ata_id_has_flush_ext().
Fixes:
e87fd28cf9a2 ("libata: Implement support for sense data reporting")
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Bernard Metzler [Tue, 20 Sep 2022 08:12:02 +0000 (10:12 +0200)]
RDMA/siw: Always consume all skbuf data in sk_data_ready() upcall.
[ Upstream commit
754209850df8367c954ac1de7671c7430b1f342c ]
For header and trailer/padding processing, siw did not consume new
skb data until minimum amount present to fill current header or trailer
structure, including potential payload padding. Not consuming any
data during upcall may cause a receive stall, since tcp_read_sock()
is not upcalling again if no new data arrive.
A NFSoRDMA client got stuck at RDMA Write reception of unaligned
payload, if the current skb did contain only the expected 3 padding
bytes, but not the 4 bytes CRC trailer. Expecting 4 more bytes already
arrived in another skb, and not consuming those 3 bytes in the current
upcall left the Write incomplete, waiting for the CRC forever.
Fixes:
8b6a361b8c48 ("rdma/siw: receive path")
Reported-by: Olga Kornievskaia <kolga@netapp.com>
Tested-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com>
Link: https://lore.kernel.org/r/20220920081202.223629-1-bmt@zurich.ibm.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pali Rohár [Thu, 7 Jul 2022 18:43:28 +0000 (20:43 +0200)]
mtd: rawnand: fsl_elbc: Fix none ECC mode
[ Upstream commit
049e43b9fd8fd2966940485da163d67e96ee3fea ]
Commit
f6424c22aa36 ("mtd: rawnand: fsl_elbc: Make SW ECC work") added
support for specifying ECC mode via DTS and skipping autodetection.
But it broke explicit specification of HW ECC mode in DTS as correct
settings for HW ECC mode are applied only when NONE mode or nothing was
specified in DTS file.
Also it started aliasing NONE mode to be same as when ECC mode was not
specified and disallowed usage of ON_DIE mode.
Fix all these issues. Use autodetection of ECC mode only in case when mode
was really not specified in DTS file by checking that ecc value is invalid.
Set HW ECC settings either when HW ECC was specified in DTS or it was
autodetected. And do not fail when ON_DIE mode is set.
Fixes:
f6424c22aa36 ("mtd: rawnand: fsl_elbc: Make SW ECC work")
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220707184328.3845-1-pali@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
William Dean [Fri, 22 Jul 2022 09:16:44 +0000 (17:16 +0800)]
mtd: devices: docg3: check the return value of devm_ioremap() in the probe
[ Upstream commit
26e784433e6c65735cd6d93a8db52531970d9a60 ]
The function devm_ioremap() in docg3_probe() can fail, so
its return value should be checked.
Fixes:
82402aeb8c81e ("mtd: docg3: Use devm_*() functions")
Reported-by: Hacash Robot <hacashRobot@santino.com>
Signed-off-by: William Dean <williamsukatube@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220722091644.2937953-1-williamsukatube@163.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jim Cromie [Sun, 4 Sep 2022 21:40:46 +0000 (15:40 -0600)]
dyndbg: drop EXPORTed dynamic_debug_exec_queries
[ Upstream commit
e26ef3af964acfea311403126acee8c56c89e26b ]
This exported fn is unused, and will not be needed. Lets dump it.
The export was added to let drm control pr_debugs, as part of using
them to avoid drm_debug_enabled overheads. But its better to just
implement the drm.debug bitmap interface, then its available for
everyone.
Fixes:
a2d375eda771 ("dyndbg: refine export, rename to dynamic_debug_exec_queries()")
Fixes:
4c0d77828d4f ("dyndbg: export ddebug_exec_queries")
Acked-by: Jason Baron <jbaron@akamai.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20220904214134.408619-10-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jim Cromie [Sun, 4 Sep 2022 21:40:44 +0000 (15:40 -0600)]
dyndbg: let query-modname override actual module name
[ Upstream commit
e75ef56f74965f426dd819a41336b640ffdd8fbc ]
dyndbg's control-parser: ddebug_parse_query(), requires that search
terms: module, func, file, lineno, are used only once in a query; a
thing cannot be named both foo and bar.
The cited commit added an overriding module modname, taken from the
module loader, which is authoritative. So it set query.module 1st,
which disallowed its use in the query-string.
But now, its useful to allow a module-load to enable classes across a
whole (or part of) a subsystem at once.
# enable (dynamic-debug in) drm only
modprobe drm dyndbg="class DRM_UT_CORE +p"
# get drm_helper too
modprobe drm dyndbg="class DRM_UT_CORE module drm* +p"
# get everything that knows DRM_UT_CORE
modprobe drm dyndbg="class DRM_UT_CORE module * +p"
# also for boot-args:
drm.dyndbg="class DRM_UT_CORE module * +p"
So convert the override into a default, by filling it only when/after
the query-string omitted the module.
NB: the query class FOO handling is forthcoming.
Fixes:
8e59b5cfb9a6 dynamic_debug: add modname arg to exec_query callchain
Acked-by: Jason Baron <jbaron@akamai.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20220904214134.408619-8-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jim Cromie [Sun, 4 Sep 2022 21:40:39 +0000 (15:40 -0600)]
dyndbg: fix module.dyndbg handling
[ Upstream commit
85d6b66d31c35158364058ee98fb69ab5bb6a6b1 ]
For CONFIG_DYNAMIC_DEBUG=N, the ddebug_dyndbg_module_param_cb()
stub-fn is too permissive:
bash-5.1# modprobe drm JUNKdyndbg
bash-5.1# modprobe drm dyndbgJUNK
[ 42.933220] dyndbg param is supported only in CONFIG_DYNAMIC_DEBUG builds
[ 42.937484] ACPI: bus type drm_connector registered
This caused no ill effects, because unknown parameters are either
ignored by default with an "unknown parameter" warning, or ignored
because dyndbg allows its no-effect use on non-dyndbg builds.
But since the code has an explicit feedback message, it should be
issued accurately. Fix with strcmp for exact param-name match.
Fixes:
b48420c1d301 dynamic_debug: make dynamic-debug work for module initialization
Reported-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: Jason Baron <jbaron@akamai.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20220904214134.408619-3-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jim Cromie [Sun, 4 Sep 2022 21:40:38 +0000 (15:40 -0600)]
dyndbg: fix static_branch manipulation
[ Upstream commit
ee879be38bc87f8cedc79ae2742958db6533ca59 ]
In https://lore.kernel.org/lkml/
20211209150910.GA23668@axis.com/
Vincent's patch commented on, and worked around, a bug toggling
static_branch's, when a 2nd PRINTK-ish flag was added. The bug
results in a premature static_branch_disable when the 1st of 2 flags
was disabled.
The cited commit computed newflags, but then in the JUMP_LABEL block,
failed to use that result, instead using just one of the terms in it.
Using newflags instead made the code work properly.
This is Vincents test-case, reduced. It needs the 2nd flag to
demonstrate the bug, but it's explanatory here.
pt_test() {
echo 5 > /sys/module/dynamic_debug/verbose
site="module tcp" # just one callsite
echo " $site =_ " > /proc/dynamic_debug/control # clear it
# A B ~A ~B
for flg in +T +p "-T #broke here" -p; do
echo " $site $flg " > /proc/dynamic_debug/control
done;
# A B ~B ~A
for flg in +T +p "-p #broke here" -T; do
echo " $site $flg " > /proc/dynamic_debug/control
done
}
pt_test
Fixes:
84da83a6ffc0 dyndbg: combine flags & mask into a struct, simplify with it
CC: vincent.whitchurch@axis.com
Acked-by: Jason Baron <jbaron@akamai.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20220904214134.408619-2-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jie Hai [Tue, 30 Aug 2022 06:22:47 +0000 (14:22 +0800)]
dmaengine: hisilicon: Add multi-thread support for a DMA channel
[ Upstream commit
2cbb95883c990d0002a77e13d3278913ab26ad79 ]
When we get a DMA channel and try to use it in multiple threads it
will cause oops and hanging the system.
% echo 100 > /sys/module/dmatest/parameters/threads_per_chan
% echo 100 > /sys/module/dmatest/parameters/iterations
% echo 1 > /sys/module/dmatest/parameters/run
[383493.327077] Unable to handle kernel paging request at virtual
address
dead000000000108
[383493.335103] Mem abort info:
[383493.335103] ESR = 0x96000044
[383493.335105] EC = 0x25: DABT (current EL), IL = 32 bits
[383493.335107] SET = 0, FnV = 0
[383493.335108] EA = 0, S1PTW = 0
[383493.335109] FSC = 0x04: level 0 translation fault
[383493.335110] Data abort info:
[383493.335111] ISV = 0, ISS = 0x00000044
[383493.364739] CM = 0, WnR = 1
[383493.367793] [
dead000000000108] address between user and kernel
address ranges
[383493.375021] Internal error: Oops:
96000044 [#1] PREEMPT SMP
[383493.437574] CPU: 63 PID: 27895 Comm: dma0chan0-copy2 Kdump:
loaded Tainted: GO 5.17.0-rc4+ #2
[383493.457851] pstate:
204000c9 (nzCv daIF +PAN -UAO -TCO -DIT
-SSBS BTYPE=--)
[383493.465331] pc : vchan_tx_submit+0x64/0xa0
[383493.469957] lr : vchan_tx_submit+0x34/0xa0
This occurs because the transmission timed out, and that's due
to data race. Each thread rewrite channels's descriptor as soon as
device_issue_pending is called. It leads to the situation that
the driver thinks that it uses the right descriptor in interrupt
handler while channels's descriptor has been changed by other
thread. The descriptor which in fact reported interrupt will not
be handled any more, as well as its tx->callback.
That's why timeout reports.
With current fixes channels' descriptor changes it's value only
when it has been used. A new descriptor is acquired from
vc->desc_issued queue that is already filled with descriptors
that are ready to be sent. Threads have no direct access to DMA
channel descriptor. In case of channel's descriptor is busy, try
to submit to HW again when a descriptor is completed. In this case,
vc->desc_issued may be empty when hisi_dma_start_transfer is called,
so delete error reporting on this. Now it is just possible to queue
a descriptor for further processing.
Fixes:
e9f08b65250d ("dmaengine: hisilicon: Add Kunpeng DMA engine support")
Signed-off-by: Jie Hai <haijie1@huawei.com>
Acked-by: Zhou Wang <wangzhou1@hisilicon.com>
Link: https://lore.kernel.org/r/20220830062251.52993-4-haijie1@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jie Hai [Tue, 30 Aug 2022 06:22:46 +0000 (14:22 +0800)]
dmaengine: hisilicon: Fix CQ head update
[ Upstream commit
94477a79cf80e8ab55b68f14bc579a12ddea1e0b ]
After completion of data transfer of one or multiple descriptors,
the completion status and the current head pointer to submission
queue are written into the CQ and interrupt can be generated to
inform the software. In interrupt process CQ is read and cq_head
is updated.
hisi_dma_irq updates cq_head only when the completion status is
success. When an abnormal interrupt reports, cq_head will not update
which will cause subsequent interrupt processes read the error CQ
and never report the correct status.
This patch updates cq_head whenever CQ is accessed.
Fixes:
e9f08b65250d ("dmaengine: hisilicon: Add Kunpeng DMA engine support")
Signed-off-by: Jie Hai <haijie1@huawei.com>
Acked-by: Zhou Wang <wangzhou1@hisilicon.com>
Link: https://lore.kernel.org/r/20220830062251.52993-3-haijie1@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jie Hai [Tue, 30 Aug 2022 06:22:45 +0000 (14:22 +0800)]
dmaengine: hisilicon: Disable channels when unregister hisi_dma
[ Upstream commit
e3bdaa04ada31f46d0586df83a2789b8913053c5 ]
When hisi_dma is unloaded or unbinded, all of channels should be
disabled. This patch disables DMA channels when driver is unloaded
or unbinded.
Fixes:
e9f08b65250d ("dmaengine: hisilicon: Add Kunpeng DMA engine support")
Signed-off-by: Jie Hai <haijie1@huawei.com>
Acked-by: Zhou Wang <wangzhou1@hisilicon.com>
Link: https://lore.kernel.org/r/20220830062251.52993-2-haijie1@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dan Carpenter [Thu, 1 Sep 2022 05:18:45 +0000 (08:18 +0300)]
fpga: prevent integer overflow in dfl_feature_ioctl_set_irq()
[ Upstream commit
939bc5453b8cbdde9f1e5110ce8309aedb1b501a ]
The "hdr.count * sizeof(s32)" multiplication can overflow on 32 bit
systems leading to memory corruption. Use array_size() to fix that.
Fixes:
322b598be4d9 ("fpga: dfl: introduce interrupt trigger setting API")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/YxBAtYCM38dM7yzI@kili
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hangyu Hua [Wed, 24 Aug 2022 08:26:00 +0000 (16:26 +0800)]
misc: ocxl: fix possible refcount leak in afu_ioctl()
[ Upstream commit
c3b69ba5114c860d730870c03ab4ee45276e5e35 ]
eventfd_ctx_put need to be called to put the refcount that gotten by
eventfd_ctx_fdget when ocxl_irq_set_handler fails.
Fixes:
060146614643 ("ocxl: move event_fd handling to frontend")
Acked-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Link: https://lore.kernel.org/r/20220824082600.36159-1-hbh25y@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zhu Yanjun [Mon, 22 Aug 2022 01:16:14 +0000 (21:16 -0400)]
RDMA/rxe: Fix the error caused by qp->sk
[ Upstream commit
548ce2e66725dcba4e27d1e8ac468d5dd17fd509 ]
When sock_create_kern in the function rxe_qp_init_req fails,
qp->sk is set to NULL.
Then the function rxe_create_qp will call rxe_qp_do_cleanup
to handle allocated resource.
Before handling qp->sk, this variable should be checked.
Fixes:
8700e3e7c485 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/20220822011615.805603-3-yanjun.zhu@linux.dev
Signed-off-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zhu Yanjun [Mon, 22 Aug 2022 01:16:13 +0000 (21:16 -0400)]
RDMA/rxe: Fix "kernel NULL pointer dereference" error
[ Upstream commit
a625ca30eff806395175ebad3ac1399014bdb280 ]
When rxe_queue_init in the function rxe_qp_init_req fails,
both qp->req.task.func and qp->req.task.arg are not initialized.
Because of creation of qp fails, the function rxe_create_qp will
call rxe_qp_do_cleanup to handle allocated resource.
Before calling __rxe_do_task, both qp->req.task.func and
qp->req.task.arg should be checked.
Fixes:
8700e3e7c485 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/20220822011615.805603-2-yanjun.zhu@linux.dev
Reported-by: syzbot+ab99dc4c6e961eed8b8e@syzkaller.appspotmail.com
Signed-off-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Miaoqian Lin [Wed, 1 Jun 2022 04:25:14 +0000 (06:25 +0200)]
media: xilinx: vipp: Fix refcount leak in xvip_graph_dma_init
[ Upstream commit
1c78f19c3a0ea312a8178a6bfd8934eb93e9b10a ]
of_get_child_by_name() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
Add missing of_node_put() to avoid refcount leak.
Fixes:
df3305156f98 ("[media] v4l: xilinx: Add Xilinx Video IP core")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Xu Qiang [Thu, 18 Aug 2022 06:57:53 +0000 (08:57 +0200)]
media: meson: vdec: add missing clk_disable_unprepare on error in vdec_hevc_start()
[ Upstream commit
4029372233e13e281f8c387f279f9f064ced3810 ]
Add the missing clk_disable_unprepare() before return
from vdec_hevc_start() in the error handling case.
Fixes:
823a7300340e (“media: meson: vdec: add common HEVC decoder support”)
Signed-off-by: Xu Qiang <xuqiang36@huawei.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Shubhrajyoti Datta [Fri, 29 Jul 2022 11:47:45 +0000 (17:17 +0530)]
tty: xilinx_uartps: Fix the ignore_status
[ Upstream commit
b8a6c3b3d4654fba19881cc77da61eac29f57cae ]
Currently the ignore_status is not considered in the isr.
Add a check to add the ignore_status.
Fixes:
61ec9016988f ("tty/serial: add support for Xilinx PS UART")
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Link: https://lore.kernel.org/r/20220729114748.18332-5-shubhrajyoti.datta@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Liang He [Wed, 20 Jul 2022 14:30:03 +0000 (16:30 +0200)]
media: exynos4-is: fimc-is: Add of_node_put() when breaking out of loop
[ Upstream commit
211f8304fa21aaedc2c247f0c9d6c7f1aaa61ad7 ]
In fimc_is_register_subdevs(), we need to call of_node_put() for
the reference 'i2c_bus' when breaking out of the
for_each_compatible_node() which has increased the refcount.
Fixes:
9a761e436843 ("[media] exynos4-is: Add Exynos4x12 FIMC-IS driver")
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jack Wang [Fri, 26 Aug 2022 10:12:27 +0000 (12:12 +0200)]
HSI: omap_ssi_port: Fix dma_map_sg error check
[ Upstream commit
551e325bbd3fb8b5a686ac1e6cf76e5641461cf2 ]
dma_map_sg return 0 on error, in case of error return -EIO
to caller.
Cc: Sebastian Reichel <sre@kernel.org>
Cc: linux-kernel@vger.kernel.org (open list)
Fixes:
b209e047bc74 ("HSI: Introduce OMAP SSI driver")
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Miaoqian Lin [Mon, 4 Apr 2022 08:52:32 +0000 (08:52 +0000)]
HSI: omap_ssi: Fix refcount leak in ssi_probe
[ Upstream commit
9a2ea132df860177b33c9fd421b26c4e9a0a9396 ]
When returning or breaking early from a
for_each_available_child_of_node() loop, we need to explicitly call
of_node_put() on the child node to possibly release the node.
Fixes:
b209e047bc74 ("HSI: Introduce OMAP SSI driver")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Miaoqian Lin [Mon, 23 May 2022 15:28:11 +0000 (19:28 +0400)]
clk: tegra20: Fix refcount leak in tegra20_clock_init
[ Upstream commit
4e343bafe03ff68a62f48f8235cf98f2c685468b ]
of_find_matching_node() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
Add missing of_node_put() to avoid refcount leak.
Fixes:
37c26a906527 ("clk: tegra: add clock support for Tegra20")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220523152811.19692-1-linmq006@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Miaoqian Lin [Mon, 23 May 2022 14:38:34 +0000 (18:38 +0400)]
clk: tegra: Fix refcount leak in tegra114_clock_init
[ Upstream commit
db16a80c76ea395766913082b1e3f939dde29b2c ]
of_find_matching_node() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
Add missing of_node_put() to avoid refcount leak.
Fixes:
2cb5efefd6f7 ("clk: tegra: Implement clocks for Tegra114")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220523143834.7587-1-linmq006@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Miaoqian Lin [Mon, 23 May 2022 14:26:08 +0000 (18:26 +0400)]
clk: tegra: Fix refcount leak in tegra210_clock_init
[ Upstream commit
56c78cb1f00a9dde8cd762131ce8f4c5eb046fbb ]
of_find_matching_node() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
Add missing of_node_put() to avoid refcount leak.
Fixes:
6b301a059eb2 ("clk: tegra: Add support for Tegra210 clocks")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220523142608.65074-1-linmq006@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Liang He [Mon, 4 Jul 2022 00:47:29 +0000 (08:47 +0800)]
clk: sprd: Hold reference returned by of_get_parent()
[ Upstream commit
91e6455bf715fb1558a0bf8f645ec1c131254a3c ]
We should hold the reference returned by of_get_parent() and use it
to call of_node_put() for refcount balance.
Fixes:
f95e8c7923d1 ("clk: sprd: support to get regmap from parent node")
Signed-off-by: Liang He <windhl@126.com>
Link: https://lore.kernel.org/r/20220704004729.272481-1-windhl@126.com
Reviewed-by: Orson Zhai <orsonzhai@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Liang He [Fri, 8 Jul 2022 08:49:00 +0000 (16:49 +0800)]
clk: berlin: Add of_node_put() for of_get_parent()
[ Upstream commit
37c381b812dcbfde9c3f1f3d3e75fdfc1b40d5bc ]
In berlin2_clock_setup() and berlin2q_clock_setup(), we need to
call of_node_put() for the reference returned by of_get_parent()
which has increased the refcount. We should call *_put() in fail
path or when it is not used anymore.
Fixes:
26b3b6b959b2 ("clk: berlin: prepare simple-mfd conversion")
Signed-off-by: Liang He <windhl@126.com>
Link: https://lore.kernel.org/r/20220708084900.311684-1-windhl@126.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Liang He [Tue, 28 Jun 2022 14:38:51 +0000 (22:38 +0800)]
clk: qoriq: Hold reference returned by of_get_parent()
[ Upstream commit
a8ea4273bc26256ce3cce83164f0f51c5bf6e127 ]
In legacy_init_clockgen(), we need to hold the reference returned
by of_get_parent() and use it to call of_node_put() for refcount
balance.
Beside, in create_sysclk(), we need to call of_node_put() on 'sysclk'
also for refcount balance.
Fixes:
0dfc86b3173f ("clk: qoriq: Move chip-specific knowledge into driver")
Signed-off-by: Liang He <windhl@126.com>
Link: https://lore.kernel.org/r/20220628143851.171299-1-windhl@126.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Liang He [Tue, 28 Jun 2022 14:31:55 +0000 (22:31 +0800)]
clk: oxnas: Hold reference returned by of_get_parent()
[ Upstream commit
1d6aa08c54cd0e005210ab8e3b1e92ede70f8a4f ]
In oxnas_stdclk_probe(), we need to hold the reference returned by
of_get_parent() and use it to call of_node_put() for refcount
balance.
Fixes:
0bbd72b4c64f ("clk: Add Oxford Semiconductor OXNAS Standard Clocks")
Signed-off-by: Liang He <windhl@126.com>
Link: https://lore.kernel.org/r/20220628143155.170550-1-windhl@126.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Liang He [Tue, 28 Jun 2022 14:10:38 +0000 (22:10 +0800)]
clk: meson: Hold reference returned by of_get_parent()
[ Upstream commit
89ab396d712f7c91fe94f55cff23460426f5fc81 ]
We should hold the reference returned by of_get_parent() and use it
to call of_node_put() for refcount balance.
Fixes:
88e2da81241e ("clk: meson: aoclk: refactor common code into dedicated file")
Fixes:
6682bd4d443f ("clk: meson: factorise meson64 peripheral clock controller drivers")
Fixes:
bb6eddd1d28c ("clk: meson: meson8b: use the HHI syscon if available")
Signed-off-by: Liang He <windhl@126.com>
Link: https://lore.kernel.org/r/20220628141038.168383-1-windhl@126.com
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Thinh Nguyen [Thu, 28 Jul 2022 01:38:01 +0000 (18:38 -0700)]
usb: common: debug: Check non-standard control requests
[ Upstream commit
b6155eaf6b05e558218b44b88a6cad03f15a586c ]
Previously usb_decode_ctrl() only decodes standard control requests, but
it was used for non-standard requests also. If it's non-standard or
unknown standard bRequest, print the Setup data values.
Fixes:
af32423a2d86 ("usb: dwc3: trace: decode ctrl request")
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/8d6a30f2f2f953eff833a5bc5aac640a4cc2fc9f.1658971571.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chunfeng Yun [Mon, 8 Mar 2021 02:52:07 +0000 (10:52 +0800)]
usb: common: move function's kerneldoc next to its definition
[ Upstream commit
365038f24b3e9d2b7c9e499f03f432040e28a35c ]
Following a general rule, add the kerneldoc for a function next
to it's definition, but not next to its declaration in a header
file.
Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/c4d2e010ae2bf67cdfa0b55e6d1deb9339d9d3dc.1615170625.git.chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of:
b6155eaf6b05 ("usb: common: debug: Check non-standard control requests")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chunfeng Yun [Mon, 8 Mar 2021 02:52:05 +0000 (10:52 +0800)]
usb: common: add function to get interval expressed in us unit
[ Upstream commit
fb95c7cf5600b7b74412f27dfb39a1e13fd8a90d ]
Add a new function to convert bInterval into the time expressed
in 1us unit.
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/25c8a09b055f716c1e5bf11fea72c3418f844482.1615170625.git.chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of:
b6155eaf6b05 ("usb: common: debug: Check non-standard control requests")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Thinh Nguyen [Wed, 20 Jan 2021 01:36:14 +0000 (17:36 -0800)]
usb: common: Parse for USB SSP genXxY
[ Upstream commit
52c2d15703c3a900d5f78cd599b823db40d5100b ]
The USB "maximum-speed" property can now take the SSP signaling rate
generation and lane count with these new strings:
"super-speed-plus-gen2x2"
"super-speed-plus-gen2x1"
"super-speed-plus-gen1x2"
Introduce usb_get_maximum_ssp_rate() to parse for the corresponding
usb_ssp_rate enum. The original usb_get_maximum_speed() will return
USB_SPEED_SUPER_PLUS if it matches one of these new strings.
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/f8ed896313d8cd8e2d2b540fc82db92b3ddf8a47.1611106162.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of:
b6155eaf6b05 ("usb: common: debug: Check non-standard control requests")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Thinh Nguyen [Thu, 14 Jan 2021 02:52:46 +0000 (18:52 -0800)]
usb: ch9: Add USB 3.2 SSP attributes
[ Upstream commit
f2fc9ff28d1c9bef7760516feadd38164044caae ]
In preparation for USB 3.2 dual-lane support, add sublink speed
attribute macros and enum usb_ssp_rate. A USB device that operates in
SuperSpeed Plus may operate at different speed and lane count. These
additional macros and enum values help specifying that.
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/ae9293ebd63a29f2a2035054753534d9eb123d74.1610592135.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of:
b6155eaf6b05 ("usb: common: debug: Check non-standard control requests")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jonathan Cameron [Sun, 26 Jun 2022 12:29:23 +0000 (13:29 +0100)]
iio: ABI: Fix wrong format of differential capacitance channel ABI.
[ Upstream commit
1efc41035f1841acf0af2bab153158e27ce94f10 ]
in_ only occurs once in these attributes.
Fixes:
0baf29d658c7 ("staging:iio:documentation Add abi docs for capacitance adcs.")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220626122938.582107-3-jic23@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Nuno Sá [Fri, 15 Jul 2022 12:28:49 +0000 (14:28 +0200)]
iio: inkern: only release the device node when done with it
[ Upstream commit
79c3e84874c7d14f04ad58313b64955a0d2e9437 ]
'of_node_put()' can potentially release the memory pointed to by
'iiospec.np' which would leave us with an invalid pointer (and we would
still pass it in 'of_xlate()'). Note that it is not guaranteed for the
of_node lifespan to be attached to the device (to which is attached)
lifespan so that there is (even though very unlikely) the possibility
for the node to be freed while the device is still around. Thus, as there
are indeed some of_xlate users which do access the node, a race is indeed
possible.
As such, we can only release the node after we are done with it.
Fixes:
17d82b47a215d ("iio: Add OF support")
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20220715122903.332535-2-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Claudiu Beznea [Wed, 3 Aug 2022 10:28:40 +0000 (13:28 +0300)]
iio: adc: at91-sama5d2_adc: disable/prepare buffer on suspend/resume
[ Upstream commit
808175e21d9b7f866eda742e8970f27b78afe5db ]
In case triggered buffers are enabled while system is suspended they will
not work anymore after resume. For this call at91_adc_buffer_postdisable()
on suspend and at91_adc_buffer_prepare() on resume. On tests it has been
seen that at91_adc_buffer_postdisable() call is not necessary but it has
been kept because it also does the book keeping for DMA. On resume path
there is no need to call at91_adc_configure_touch() as it is embedded in
at91_adc_buffer_prepare().
Fixes:
073c662017f2f ("iio: adc: at91-sama5d2_adc: add support for DMA")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220803102855.2191070-5-claudiu.beznea@microchip.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Claudiu Beznea [Wed, 3 Aug 2022 10:28:39 +0000 (13:28 +0300)]
iio: adc: at91-sama5d2_adc: lock around oversampling and sample freq
[ Upstream commit
9780a23ed5a0a0a63683e078f576719a98d4fb70 ]
.read_raw()/.write_raw() could be called asynchronously from user space
or other in kernel drivers. Without locking on st->lock these could be
called asynchronously while there is a conversion in progress. Read will
be harmless but changing registers while conversion is in progress may
lead to inconsistent results. Thus, to avoid this lock st->lock.
Fixes:
27e177190891 ("iio:adc:at91_adc8xx: introduce new atmel adc driver")
Fixes:
6794e23fa3fe ("iio: adc: at91-sama5d2_adc: add support for oversampling resolution")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220803102855.2191070-4-claudiu.beznea@microchip.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Claudiu Beznea [Wed, 3 Aug 2022 10:28:38 +0000 (13:28 +0300)]
iio: adc: at91-sama5d2_adc: check return status for pressure and touch
[ Upstream commit
d84ace944a3b24529798dbae1340dea098473155 ]
Check return status of at91_adc_read_position() and
at91_adc_read_pressure() in at91_adc_read_info_raw().
Fixes:
6794e23fa3fe ("iio: adc: at91-sama5d2_adc: add support for oversampling resolution")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220803102855.2191070-3-claudiu.beznea@microchip.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Claudiu Beznea [Wed, 3 Aug 2022 10:28:37 +0000 (13:28 +0300)]
iio: adc: at91-sama5d2_adc: fix AT91_SAMA5D2_MR_TRACKTIM_MAX
[ Upstream commit
bb73d5d9164c57c4bb916739a98e5cd8e0a5ed8c ]
All ADC HW versions handled by this driver (SAMA5D2, SAM9X60, SAMA7G5)
have MR.TRACKTIM on 4 bits. Fix AT91_SAMA5D2_MR_TRACKTIM_MAX to reflect
this.
Fixes:
27e177190891 ("iio:adc:at91_adc8xx: introduce new atmel adc driver")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220803102855.2191070-2-claudiu.beznea@microchip.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dmitry Torokhov [Tue, 27 Sep 2022 22:05:03 +0000 (15:05 -0700)]
ARM: dts: exynos: fix polarity of VBUS GPIO of Origen
[ Upstream commit
a08137bd1e0a7ce951dce9ce4a83e39d379b6e1b ]
EHCI Oxynos (drivers/usb/host/ehci-exynos.c) drives VBUS GPIO high when
trying to power up the bus, therefore the GPIO in DTS must be marked as
"active high". This will be important when EHCI driver is converted to
gpiod API that respects declared polarities.
Fixes:
4e8991def565 ("ARM: dts: exynos: Enable AX88760 USB hub on Origen board")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/20220927220504.3744878-1-dmitry.torokhov@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mark Rutland [Thu, 29 Sep 2022 13:45:25 +0000 (14:45 +0100)]
arm64: ftrace: fix module PLTs with mcount
[ Upstream commit
8cfb08575c6d4585f1ce0deeb189e5c824776b04 ]
Li Huafei reports that mcount-based ftrace with module PLTs was broken
by commit:
a6253579977e4c6f ("arm64: ftrace: consistently handle PLTs.")
When a module PLTs are used and a module is loaded sufficiently far away
from the kernel, we'll create PLTs for any branches which are
out-of-range. These are separate from the special ftrace trampoline
PLTs, which the module PLT code doesn't directly manipulate.
When mcount is in use this is a problem, as each mcount callsite in a
module will be initialized to point to a module PLT, but since commit
a6253579977e4c6f ftrace_make_nop() will assume that the callsite has
been initialized to point to the special ftrace trampoline PLT, and
ftrace_find_callable_addr() rejects other cases.
This means that when ftrace tries to initialize a callsite via
ftrace_make_nop(), the call to ftrace_find_callable_addr() will find
that the `_mcount` stub is out-of-range and is not handled by the ftrace
PLT, resulting in a splat:
| ftrace_test: loading out-of-tree module taints kernel.
| ftrace: no module PLT for _mcount
| ------------[ ftrace bug ]------------
| ftrace failed to modify
| [<
ffff800029180014>] 0xffff800029180014
| actual: 44:00:00:94
| Initializing ftrace call sites
| ftrace record flags:
2000000
| (0)
| expected tramp:
ffff80000802eb3c
| ------------[ cut here ]------------
| WARNING: CPU: 3 PID: 157 at kernel/trace/ftrace.c:2120 ftrace_bug+0x94/0x270
| Modules linked in:
| CPU: 3 PID: 157 Comm: insmod Tainted: G O
6.0.0-rc6-00151-gcd722513a189-dirty #22
| Hardware name: linux,dummy-virt (DT)
| pstate:
60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
| pc : ftrace_bug+0x94/0x270
| lr : ftrace_bug+0x21c/0x270
| sp :
ffff80000b2bbaf0
| x29:
ffff80000b2bbaf0 x28:
0000000000000000 x27:
ffff0000c4d38000
| x26:
0000000000000001 x25:
ffff800009d7e000 x24:
ffff0000c4d86e00
| x23:
0000000002000000 x22:
ffff80000a62b000 x21:
ffff8000098ebea8
| x20:
ffff0000c4d38000 x19:
ffff80000aa24158 x18:
ffffffffffffffff
| x17:
0000000000000000 x16:
0a0d2d2d2d2d2d2d x15:
ffff800009aa9118
| x14:
0000000000000000 x13:
6333626532303830 x12:
3030303866666666
| x11:
203a706d61727420 x10:
6465746365707865 x9 :
3362653230383030
| x8 :
c0000000ffffefff x7 :
0000000000017fe8 x6 :
000000000000bff4
| x5 :
0000000000057fa8 x4 :
0000000000000000 x3 :
0000000000000001
| x2 :
ad2cb14bb5438900 x1 :
0000000000000000 x0 :
0000000000000022
| Call trace:
| ftrace_bug+0x94/0x270
| ftrace_process_locs+0x308/0x430
| ftrace_module_init+0x44/0x60
| load_module+0x15b4/0x1ce8
| __do_sys_init_module+0x1ec/0x238
| __arm64_sys_init_module+0x24/0x30
| invoke_syscall+0x54/0x118
| el0_svc_common.constprop.4+0x84/0x100
| do_el0_svc+0x3c/0xd0
| el0_svc+0x1c/0x50
| el0t_64_sync_handler+0x90/0xb8
| el0t_64_sync+0x15c/0x160
| ---[ end trace
0000000000000000 ]---
| ---------test_init-----------
Fix this by reverting to the old behaviour of ignoring the old
instruction when initialising an mcount callsite in a module, which was
the behaviour prior to commit
a6253579977e4c6f.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Fixes:
a6253579977e ("arm64: ftrace: consistently handle PLTs.")
Reported-by: Li Huafei <lihuafei1@huawei.com>
Link: https://lore.kernel.org/linux-arm-kernel/20220929094134.99512-1-lihuafei1@huawei.com
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20220929134525.798593-1-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Geert Uytterhoeven [Tue, 27 Sep 2022 13:28:26 +0000 (15:28 +0200)]
ARM: Drop CMDLINE_* dependency on ATAGS
[ Upstream commit
136f4b1ec7c962ee37a787e095fd37b058d72bd3 ]
On arm32, the configuration options to specify the kernel command line
type depend on ATAGS. However, the actual CMDLINE cofiguration option
does not depend on ATAGS, and the code that handles this is not specific
to ATAGS (see drivers/of/fdt.c:early_init_dt_scan_chosen()).
Hence users who desire to override the kernel command line on arm32 must
enable support for ATAGS, even on a pure-DT system. Other architectures
(arm64, loongarch, microblaze, nios2, powerpc, and riscv) do not impose
such a restriction.
Hence drop the dependency on ATAGS.
Fixes:
bd51e2f595580fb6 ("ARM: 7506/1: allow for ATAGS to be configured out when DT support is selected")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dmitry Torokhov [Mon, 26 Sep 2022 10:43:53 +0000 (12:43 +0200)]
ARM: dts: exynos: correct s5k6a3 reset polarity on Midas family
[ Upstream commit
3ba2d4bb9592bf7a6a3fe3dbe711ecfc3d004bab ]
According to s5k6a3 driver code, the reset line for the chip appears to
be active low. This also matches the typical polarity of reset lines in
general. Let's fix it up as having correct polarity in DTS is important
when the driver will be switched over to gpiod API.
Fixes:
b4fec64758ab ("ARM: dts: Add camera device nodes for Exynos4412 TRATS2 board")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20220913164104.203957-1-dmitry.torokhov@gmail.com
Link: https://lore.kernel.org/r/20220926104354.118578-2-krzysztof.kozlowski@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dmitry Osipenko [Wed, 23 Sep 2020 00:34:21 +0000 (03:34 +0300)]
soc/tegra: fuse: Drop Kconfig dependency on TEGRA20_APB_DMA
[ Upstream commit
2254182807fc09ba9dec9a42ef239e373796f1b2 ]
The DMA subsystem could be entirely disabled in Kconfig and then the
TEGRA20_APB_DMA option isn't available too. Hence kernel configuration
fails if DMADEVICES Kconfig option is disabled due to the unsatisfiable
dependency.
The FUSE driver isn't a critical driver and currently it only provides
NVMEM interface to userspace which isn't known to be widely used, and
thus, it's fine if FUSE driver fails to load.
Let's remove the erroneous Kconfig dependency and let the FUSE driver to
fail the probing if DMA is unavailable.
Fixes:
19d41e5e9c68 ("soc/tegra: fuse: Add APB DMA dependency for Tegra20")
Reported-by: Necip Fazil Yildiran <fazilyildiran@gmail.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=209301
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Randy Dunlap [Sun, 11 Sep 2022 01:26:16 +0000 (18:26 -0700)]
ia64: export memory_add_physaddr_to_nid to fix cxl build error
[ Upstream commit
97c318bfbe84efded246e80428054f300042f110 ]
cxl_pmem.ko uses memory_add_physaddr_to_nid() but ia64 does not export it,
so this causes a build error:
ERROR: modpost: "memory_add_physaddr_to_nid" [drivers/cxl/cxl_pmem.ko] undefined!
Fix this by exporting that function.
Fixes:
8c2676a5870a ("hot-add-mem x86_64: memory_add_physaddr_to_nid node fixup")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Ben Widawsky <bwidawsk@kernel.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: linux-ia64@vger.kernel.org
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Keith Mannthey <kmannth@us.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Michael Walle [Tue, 16 Aug 2022 00:10:25 +0000 (02:10 +0200)]
ARM: dts: kirkwood: lsxl: remove first ethernet port
[ Upstream commit
2d528eda7c96ce5c70f895854ecd5684bd5d80b9 ]
Both the Linkstation LS-CHLv2 and the LS-XHL have only one ethernet
port. This has always been wrong, i.e. the board code used to set up
both ports, but the driver will play nice and return -ENODEV if the
assiciated PHY is not found. Nevertheless, it is wrong. Remove it.
Fixes:
876e23333511 ("ARM: kirkwood: add gigabit ethernet and mvmdio device tree nodes")
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Michael Walle [Tue, 16 Aug 2022 00:10:24 +0000 (02:10 +0200)]
ARM: dts: kirkwood: lsxl: fix serial line
[ Upstream commit
04eabc6ac10fda9424606d9a7ab6ab9a5d95350a ]
Commit
327e15428977 ("ARM: dts: kirkwood: consolidate common pinctrl
settings") unknowingly broke the serial output on this board. Before
this commit, the pinmux was still configured by the bootloader and the
kernel didn't reconfigured it again. This was an oversight by the
initial board support where the pinmux for the serial line was never
configured by the kernel. But with this commit, the serial line will be
reconfigured to the wrong pins. This is especially confusing, because
the output still works, but the input doesn't. Presumingly, the input is
reconfigured to MPP10, but the output is connected to both MPP11 and
MPP5.
Override the pinmux in the board device tree.
Fixes:
327e15428977 ("ARM: dts: kirkwood: consolidate common pinctrl settings")
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Marek Behún [Wed, 27 Jul 2022 12:56:10 +0000 (14:56 +0200)]
ARM: dts: turris-omnia: Fix mpp26 pin name and comment
[ Upstream commit
49e93898f0dc177e645c22d0664813567fd9ec00 ]
There is a bug in Turris Omnia's schematics, whereupon the MPP[26] pin,
which is routed to CN11 pin header, is documented as SPI CS1, but
MPP[26] pin does not support this function. Instead it controls chip
select 2 if in "spi0" mode.
Fix the name of the pin node in pinctrl node and fix the comment in SPI
node.
Fixes:
26ca8b52d6e1 ("ARM: dts: add support for Turris Omnia")
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Liang He [Thu, 21 Jul 2022 13:52:17 +0000 (21:52 +0800)]
soc: qcom: smem_state: Add refcounting for the 'state->of_node'
[ Upstream commit
90681f53b9381c23ff7762a3b13826d620c272de ]
In qcom_smem_state_register() and qcom_smem_state_release(), we
should better use of_node_get() and of_node_put() for the reference
creation and destruction of 'device_node'.
Fixes:
9460ae2ff308 ("soc: qcom: Introduce common SMEM state machine code")
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220721135217.1301039-2-windhl@126.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Liang He [Thu, 21 Jul 2022 13:52:16 +0000 (21:52 +0800)]
soc: qcom: smsm: Fix refcount leak bugs in qcom_smsm_probe()
[ Upstream commit
af8f6f39b8afd772fda4f8e61823ef8c021bf382 ]
There are two refcount leak bugs in qcom_smsm_probe():
(1) The 'local_node' is escaped out from for_each_child_of_node() as
the break of iteration, we should call of_node_put() for it in error
path or when it is not used anymore.
(2) The 'node' is escaped out from for_each_available_child_of_node()
as the 'goto', we should call of_node_put() for it in goto target.
Fixes:
c97c4090ff72 ("soc: qcom: smsm: Add driver for Qualcomm SMSM")
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220721135217.1301039-1-windhl@126.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Liang He [Tue, 19 Jul 2022 08:56:40 +0000 (16:56 +0800)]
memory: of: Fix refcount leak bug in of_lpddr3_get_ddr_timings()
[ Upstream commit
48af14fb0eaa63d9aa68f59fb0b205ec55a95636 ]
We should add the of_node_put() when breaking out of
for_each_child_of_node() as it will automatically increase
and decrease the refcount.
Fixes:
976897dd96db ("memory: Extend of_memory with LPDDR3 support")
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220719085640.1210583-2-windhl@126.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Liang He [Tue, 19 Jul 2022 08:56:39 +0000 (16:56 +0800)]
memory: of: Fix refcount leak bug in of_get_ddr_timings()
[ Upstream commit
05215fb32010d4afb68fbdbb4d237df6e2d4567b ]
We should add the of_node_put() when breaking out of
for_each_child_of_node() as it will automatically increase
and decrease the refcount.
Fixes:
e6b42eb6a66c ("memory: emif: add device tree support to emif driver")
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220719085640.1210583-1-windhl@126.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Liang He [Sat, 16 Jul 2022 03:13:24 +0000 (11:13 +0800)]
memory: pl353-smc: Fix refcount leak bug in pl353_smc_probe()
[ Upstream commit
61b3c876c1cbdb1efd1f52a1f348580e6e14efb6 ]
The break of for_each_available_child_of_node() needs a
corresponding of_node_put() when the reference 'child' is not
used anymore. Here we do not need to call of_node_put() in
fail path as '!match' means no break.
While the of_platform_device_create() will created a new
reference by 'child' but it has considered the refcounting.
Fixes:
fee10bd22678 ("memory: pl353: Add driver for arm pl353 static memory controller")
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220716031324.447680-1-windhl@126.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Takashi Iwai [Sat, 1 Oct 2022 07:48:10 +0000 (09:48 +0200)]
ALSA: hda/hdmi: Don't skip notification handling during PM operation
[ Upstream commit
5226c7b9784eee215e3914f440b3c2e1764f67a8 ]
The HDMI driver skips the notification handling from the graphics
driver when the codec driver is being in the PM operation. This
behavior was introduced by the commit
eb399d3c99d8 ("ALSA: hda - Skip
ELD notification during PM process"). This skip may cause a problem,
as we may miss the ELD update when the connection/disconnection
happens right at the runtime-PM operation of the audio codec.
Although this workaround was valid at that time, it's no longer true;
the fix was required just because the ELD update procedure needed to
wake up the audio codec, which had lead to a runtime-resume during a
runtime-suspend. Meanwhile, the ELD update procedure doesn't need a
codec wake up any longer since the commit
788d441a164c ("ALSA: hda -
Use component ops for i915 HDMI/DP audio jack handling"); i.e. there
is no much reason for skipping the notification.
Let's drop those checks for addressing the missing notification.
Fixes:
788d441a164c ("ALSA: hda - Use component ops for i915 HDMI/DP audio jack handling")
Reported-by: Brent Lu <brent.lu@intel.com>
Link: https://lore.kernel.org/r/20220927135807.4097052-1-brent.lu@intel.com
Link: https://lore.kernel.org/r/20221001074809.7461-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zhang Qilong [Wed, 28 Sep 2022 16:01:16 +0000 (00:01 +0800)]
ASoC: mt6660: Fix PM disable depth imbalance in mt6660_i2c_probe
[ Upstream commit
b73f11e895e140537e7f8c7251211ccd3ce0782b ]
The pm_runtime_enable will increase power disable depth. Thus
a pairing decrement is needed on the error handling path to
keep it balanced according to context. We fix it by moving
pm_runtime_enable to the endding of mt6660_i2c_probe.
Fixes:
f289e55c6eeb4 ("ASoC: Add MediaTek MT6660 Speaker Amp Driver")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20220928160116.125020-5-zhangqilong3@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zhang Qilong [Wed, 28 Sep 2022 16:01:15 +0000 (00:01 +0800)]
ASoC: wm5102: Fix PM disable depth imbalance in wm5102_probe
[ Upstream commit
fcbb60820cd3008bb44334a0395e5e57ccb77329 ]
The pm_runtime_enable will increase power disable depth. Thus
a pairing decrement is needed on the error handling path to
keep it balanced according to context. We fix it by moving
pm_runtime_enable to the endding of wm5102_probe.
Fixes:
93e8791dd34ca ("ASoC: wm5102: Initial driver")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20220928160116.125020-4-zhangqilong3@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zhang Qilong [Wed, 28 Sep 2022 16:01:14 +0000 (00:01 +0800)]
ASoC: wm5110: Fix PM disable depth imbalance in wm5110_probe
[ Upstream commit
86b46bf1feb83898d89a2b4a8d08d21e9ea277a7 ]
The pm_runtime_enable will increase power disable depth. Thus
a pairing decrement is needed on the error handling path to
keep it balanced according to context. We fix it by moving
pm_runtime_enable to the endding of wm5110_probe.
Fixes:
5c6af635fd772 ("ASoC: wm5110: Add audio CODEC driver")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20220928160116.125020-3-zhangqilong3@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zhang Qilong [Wed, 28 Sep 2022 16:01:13 +0000 (00:01 +0800)]
ASoC: wm8997: Fix PM disable depth imbalance in wm8997_probe
[ Upstream commit
41a736ac20602f64773e80f0f5b32cde1830a44a ]
The pm_runtime_enable will increase power disable depth. Thus
a pairing decrement is needed on the error handling path to
keep it balanced according to context. We fix it by moving
pm_runtime_enable to the endding of wm8997_probe
Fixes:
40843aea5a9bd ("ASoC: wm8997: Initial CODEC driver")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20220928160116.125020-2-zhangqilong3@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christophe JAILLET [Thu, 22 Sep 2022 19:06:40 +0000 (21:06 +0200)]
mmc: wmt-sdmmc: Fix an error handling path in wmt_mci_probe()
[ Upstream commit
cb58188ad90a61784a56a64f5107faaf2ad323e7 ]
A dma_free_coherent() call is missing in the error handling path of the
probe, as already done in the remove function.
Fixes:
3a96dff0f828 ("mmc: SD/MMC Host Controller for Wondermedia WM8505/WM8650")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/53fc6ffa5d1c428fefeae7d313cf4a669c3a1e98.1663873255.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andreas Pape [Mon, 26 Sep 2022 16:58:13 +0000 (18:58 +0200)]
ALSA: dmaengine: increment buffer pointer atomically
[ Upstream commit
d1c442019594692c64a70a86ad88eb5b6db92216 ]
Setting pointer and afterwards checking for wraparound leads
to the possibility of returning the inconsistent pointer position.
This patch increments buffer pointer atomically to avoid this issue.
Fixes:
e7f73a1613567a ("ASoC: Add dmaengine PCM helper functions")
Signed-off-by: Andreas Pape <apape@de.adit-jv.com>
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Link: https://lore.kernel.org/r/1664211493-11789-1-git-send-email-erosca@de.adit-jv.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christophe JAILLET [Thu, 22 Sep 2022 19:44:57 +0000 (21:44 +0200)]
ASoC: da7219: Fix an error handling path in da7219_register_dai_clks()
[ Upstream commit
abb4e4349afe7eecdb0499582f1c777031e3a7c8 ]
If clk_hw_register() fails, the corresponding clk should not be
unregistered.
To handle errors from loops, clean up partial iterations before doing the
goto. So add a clk_hw_unregister().
Then use a while (--i >= 0) loop in the unwind section.
Fixes:
78013a1cf297 ("ASoC: da7219: Fix clock handling around codec level probe")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/e4acceab57a0d9e477a8d5890a45c5309e553e7c.1663875789.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kuogee Hsieh [Wed, 24 Aug 2022 20:15:50 +0000 (13:15 -0700)]
drm/msm/dp: correct 1.62G link rate at dp_catalog_ctrl_config_msa()
[ Upstream commit
aa0bff10af1c4b92e6b56e3e1b7f81c660d3ba78 ]
At current implementation there is an extra 0 at 1.62G link rate which
cause no correct pixel_div selected for 1.62G link rate to calculate
mvid and nvid. This patch delete the extra 0 to have mvid and nvid be
calculated correctly.
Changes in v2:
-- fix Fixes tag's text
Changes in v3:
-- fix misspelling of "Reviewed-by"
Fixes:
937f941ca06f ("drm/msm/dp: Use qmp phy for DP PLL and PHY")
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/499328/
Link: https://lore.kernel.org/r/1661372150-3764-1-git-send-email-quic_khsieh@quicinc.com
[DB: rewrapped commit message]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dmitry Baryshkov [Wed, 15 Jun 2022 12:57:01 +0000 (15:57 +0300)]
drm/msm/dpu: index dpu_kms->hw_vbif using vbif_idx
[ Upstream commit
7538f80ae0d98bf51eb89eee5344aec219902d42 ]
Remove loops over hw_vbif. Instead always VBIF's idx as an index in the
array. This fixes an error in dpu_kms_hw_init(), where we fill
dpu_kms->hw_vbif[i], but check for an error pointer at
dpu_kms->hw_vbif[vbif_idx].
Fixes:
25fdd5933e4c ("drm/msm: Add SDM845 DPU support")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/489569/
Link: https://lore.kernel.org/r/20220615125703.24647-1-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Liang He [Wed, 14 Sep 2022 13:43:54 +0000 (21:43 +0800)]
ASoC: eureka-tlv320: Hold reference returned from of_find_xxx API
[ Upstream commit
bfb735a3ceff0bab6473bac275da96f9b2a06dec ]
In eukrea_tlv320_probe(), we need to hold the reference returned
from of_find_compatible_node() which has increased the refcount
and then call of_node_put() with it when done.
Fixes:
66f232908de2 ("ASoC: eukrea-tlv320: Add DT support.")
Co-authored-by: Kelin Wang <wangkelin2023@163.com>
Signed-off-by: Liang He <windhl@126.com>
Link: https://lore.kernel.org/r/20220914134354.3995587-1-windhl@126.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christophe JAILLET [Thu, 25 Aug 2022 07:33:57 +0000 (09:33 +0200)]
mmc: au1xmmc: Fix an error handling path in au1xmmc_probe()
[ Upstream commit
5cbedf52608cc3cbc1c2a9a861fb671620427a20 ]
If clk_prepare_enable() fails, there is no point in calling
clk_disable_unprepare() in the error handling path.
Move the out_clk label at the right place.
Fixes:
b6507596dfd6 ("MIPS: Alchemy: au1xmmc: use clk framework")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/21d99886d07fa7fcbec74992657dabad98c935c4.1661412818.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Liang He [Fri, 22 Jul 2022 14:43:48 +0000 (22:43 +0800)]
drm/omap: dss: Fix refcount leak bugs
[ Upstream commit
8b42057e62120813ebe9274f508fa785b7cab33a ]
In dss_init_ports() and __dss_uninit_ports(), we should call
of_node_put() for the reference returned by of_graph_get_port_by_id()
in fail path or when it is not used anymore.
Fixes:
09bffa6e5192 ("drm: omap: use common OF graph helpers")
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220722144348.1306569-1-windhl@126.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Takashi Iwai [Tue, 6 Sep 2022 09:23:06 +0000 (11:23 +0200)]
ALSA: hda: beep: Simplify keep-power-at-enable behavior
[ Upstream commit
4c8d695cb9bc5f6fd298a586602947b2fc099a64 ]
The recent fix for IDT codecs to keep the power up while the beep is
enabled can be better integrated into the beep helper code.
This patch cleans up the code with refactoring.
Fixes:
414d38ba8710 ("ALSA: hda/sigmatel: Keep power up while beep is enabled")
Link: https://lore.kernel.org/r/20220906092306.26183-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jiasheng Jiang [Fri, 2 Sep 2022 01:30:30 +0000 (09:30 +0800)]
ASoC: rsnd: Add check for rsnd_mod_power_on
[ Upstream commit
376be51caf8871419bbcbb755e1e615d30dc3153 ]
As rsnd_mod_power_on() can return negative numbers,
it should be better to check the return value and
deal with the exception.
Fixes:
e7d850dd10f4 ("ASoC: rsnd: use mod base common method on SSI-parent")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20220902013030.3691266-1-jiasheng@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zheyu Ma [Tue, 30 Aug 2022 07:34:50 +0000 (15:34 +0800)]
drm/bridge: megachips: Fix a null pointer dereference bug
[ Upstream commit
1ff673333d46d2c1b053ebd0c1c7c7c79e36943e ]
When removing the module we will get the following warning:
[ 31.911505] i2c-core: driver [stdp2690-ge-b850v3-fw] unregistered
[ 31.912484] general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN PTI
[ 31.913338] KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
[ 31.915280] RIP: 0010:drm_bridge_remove+0x97/0x130
[ 31.921825] Call Trace:
[ 31.922533] stdp4028_ge_b850v3_fw_remove+0x34/0x60 [megachips_stdpxxxx_ge_b850v3_fw]
[ 31.923139] i2c_device_remove+0x181/0x1f0
The two bridges (stdp2690, stdp4028) do not probe at the same time, so
the driver does not call ge_b850v3_resgiter() when probing, causing the
driver to try to remove the object that has not been initialized.
Fix this by checking whether both the bridges are probed.
Fixes:
11632d4aa2b3 ("drm/bridge: megachips: Ensure both bridges are probed before registration")
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220830073450.1897020-1-zheyuma97@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Randy Dunlap [Tue, 23 Aug 2022 00:42:43 +0000 (17:42 -0700)]
drm: fix drm_mipi_dbi build errors
[ Upstream commit
eb7de496451bd969e203f02f66585131228ba4ae ]
drm_mipi_dbi needs lots of DRM_KMS_HELPER support, so select
that Kconfig symbol like it is done is most other uses, and
the way that it was before MIPS_DBI was moved from tinydrm
to its core location.
Fixes these build errors:
ld: drivers/gpu/drm/drm_mipi_dbi.o: in function `mipi_dbi_buf_copy':
drivers/gpu/drm/drm_mipi_dbi.c:205: undefined reference to `drm_gem_fb_get_obj'
ld: drivers/gpu/drm/drm_mipi_dbi.c:211: undefined reference to `drm_gem_fb_begin_cpu_access'
ld: drivers/gpu/drm/drm_mipi_dbi.c:215: undefined reference to `drm_gem_fb_vmap'
ld: drivers/gpu/drm/drm_mipi_dbi.c:222: undefined reference to `drm_fb_swab'
ld: drivers/gpu/drm/drm_mipi_dbi.c:224: undefined reference to `drm_fb_memcpy'
ld: drivers/gpu/drm/drm_mipi_dbi.c:227: undefined reference to `drm_fb_xrgb8888_to_rgb565'
ld: drivers/gpu/drm/drm_mipi_dbi.c:235: undefined reference to `drm_gem_fb_vunmap'
ld: drivers/gpu/drm/drm_mipi_dbi.c:237: undefined reference to `drm_gem_fb_end_cpu_access'
ld: drivers/gpu/drm/drm_mipi_dbi.o: in function `mipi_dbi_dev_init_with_formats':
ld: drivers/gpu/drm/drm_mipi_dbi.o:/X64/../drivers/gpu/drm/drm_mipi_dbi.c:469: undefined reference to `drm_gem_fb_create_with_dirty'
Fixes:
174102f4de23 ("drm/tinydrm: Move mipi-dbi")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Dillon Min <dillon.minfei@gmail.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220823004243.11596-1-rdunlap@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hans de Goede [Thu, 25 Aug 2022 14:13:36 +0000 (16:13 +0200)]
platform/x86: msi-laptop: Fix resource cleanup
[ Upstream commit
5523632aa10f906dfe2eb714ee748590dc7fc6b1 ]
Fix the input-device not getting free-ed on probe-errors and
fix the msi_touchpad_dwork not getting cancelled on neither
probe-errors nor on remove.
Fixes:
143a4c0284dc ("msi-laptop: send out touchpad on/off key")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220825141336.208597-3-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hans de Goede [Thu, 25 Aug 2022 14:13:34 +0000 (16:13 +0200)]
platform/x86: msi-laptop: Fix old-ec check for backlight registering
[ Upstream commit
83ac7a1c2ed5f17caa07cbbc84bad3c05dc3bf22 ]
Commit
2cc6c717799f ("msi-laptop: Port to new backlight interface
selection API") replaced this check:
if (!quirks->old_ec_model || acpi_video_backlight_support())
pr_info("Brightness ignored, ...");
else
do_register();
With:
if (quirks->old_ec_model ||
acpi_video_get_backlight_type() == acpi_backlight_vendor)
do_register();
But since the do_register() part was part of the else branch, the entire
condition should be inverted. So not only the 2 statements on either
side of the || should be inverted, but the || itself should be replaced
with a &&.
In practice this has likely not been an issue because the new-ec models
(old_ec_model==false) likely all support ACPI video backlight control,
making acpi_video_get_backlight_type() return acpi_backlight_video
turning the second part of the || also false when old_ec_model == false.
Fixes:
2cc6c717799f ("msi-laptop: Port to new backlight interface selection API")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220825141336.208597-1-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Martin Povišer [Thu, 25 Aug 2022 14:02:39 +0000 (16:02 +0200)]
ASoC: tas2764: Fix mute/unmute
[ Upstream commit
f5ad67f13623548e5aff847f89700c178aaf2a98 ]
Because the PWR_CTRL field is modeled as the power state of the DAC
widget, and at the same time it is used to implement mute/unmute, we
need some additional book-keeping to have the right end result no matter
the sequence of calls. Without this fix, one permanently mutes an
ongoing stream by toggling the associated speaker pin control.
(This mirrors commit
1e5907bcb3a3 ("ASoC: tas2770: Fix handling of
mute/unmute") which was a fix to the tas2770 driver.)
Fixes:
827ed8a0fa50 ("ASoC: tas2764: Add the driver for the TAS2764")
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220825140241.53963-4-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Martin Povišer [Thu, 25 Aug 2022 14:02:38 +0000 (16:02 +0200)]
ASoC: tas2764: Drop conflicting set_bias_level power setting
[ Upstream commit
09273f38832406db19a8907a934687cc10660a6b ]
The driver is setting the PWR_CTRL field in both the set_bias_level
callback and on DAPM events of the DAC widget (and also in the
mute_stream method). Drop the set_bias_level callback altogether as the
power setting it does is in conflict with the other code paths.
(This mirrors commit
c8a6ae3fe1c8 ("ASoC: tas2770: Drop conflicting
set_bias_level power setting") which was a fix to the tas2770 driver.)
Fixes:
827ed8a0fa50 ("ASoC: tas2764: Add the driver for the TAS2764")
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220825140241.53963-3-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Martin Povišer [Thu, 25 Aug 2022 14:02:37 +0000 (16:02 +0200)]
ASoC: tas2764: Allow mono streams
[ Upstream commit
23204d928a27146d13e11c9383632775345ecca8 ]
The part is a mono speaker amp, but it can do downmix and switch between
left and right channel, so the right channel range is 1 to 2.
(This mirrors commit
bf54d97a835d ("ASoC: tas2770: Allow mono streams")
which was a fix to the tas2770 driver.)
Fixes:
827ed8a0fa50 ("ASoC: tas2764: Add the driver for the TAS2764")
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220825140241.53963-2-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dan Carpenter [Fri, 19 Aug 2022 05:20:36 +0000 (08:20 +0300)]
platform/chrome: fix memory corruption in ioctl
[ Upstream commit
8a07b45fd3c2dda24fad43639be5335a4595196a ]
If "s_mem.bytes" is larger than the buffer size it leads to memory
corruption.
Fixes:
eda2e30c6684 ("mfd / platform: cros_ec: Miscellaneous character device to talk with the EC")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/Yv8dpCFZJdbUT5ye@kili
Signed-off-by: Sasha Levin <sashal@kernel.org>
Rustam Subkhankulov [Sat, 13 Aug 2022 22:08:43 +0000 (01:08 +0300)]
platform/chrome: fix double-free in chromeos_laptop_prepare()
[ Upstream commit
6ad4194d6a1e1d11b285989cd648ef695b4a93c0 ]
If chromeos_laptop_prepare_i2c_peripherals() fails after allocating memory
for 'cros_laptop->i2c_peripherals', this memory is freed at 'err_out' label
and nonzero value is returned. Then chromeos_laptop_destroy() is called,
resulting in double-free error.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Rustam Subkhankulov <subkhankulov@ispras.ru>
Fixes:
5020cd29d8bf ("platform/chrome: chromeos_laptop - supply properties for ACPI devices")
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220813220843.2373004-1-subkhankulov@ispras.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
Liang He [Mon, 11 Jul 2022 13:15:50 +0000 (21:15 +0800)]
drm:pl111: Add of_node_put() when breaking out of for_each_available_child_of_node()
[ Upstream commit
e0686dc6f2252e009c455fe99e2ce9d62a60eb47 ]
The reference 'child' in the iteration of for_each_available_child_of_node()
is only escaped out into a local variable which is only used to check
its value. So we still need to the of_node_put() when breaking of the
for_each_available_child_of_node() which will automatically increase
and decrease the refcount.
Fixes:
ca454bd42dc2 ("drm/pl111: Support the Versatile Express")
Signed-off-by: Liang He <windhl@126.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220711131550.361350-1-windhl@126.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Simon Ser [Thu, 10 Feb 2022 15:40:25 +0000 (15:40 +0000)]
drm/dp_mst: fix drm_dp_dpcd_read return value checks
[ Upstream commit
2ac6cdd581f48c8f68747156fde5868486a44985 ]
drm_dp_dpcd_read returns the number of bytes read. The previous code
would print garbage on DPCD error, and would exit with on error on
success.
Signed-off-by: Simon Ser <contact@emersion.fr>
Fixes:
cb897542c6d2 ("drm/dp_mst: Fix W=1 warnings")
Cc: Lyude Paul <lyude@redhat.com>
Cc: Benjamin Gaignard <benjamin.gaignard@st.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/473500/
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chen-Yu Tsai [Thu, 21 Jul 2022 09:22:58 +0000 (17:22 +0800)]
drm/bridge: parade-ps8640: Fix regulator supply order
[ Upstream commit
fc94224c2e0ae8d83ac511a3ef4962178505469d ]
The datasheet says that VDD12 must be enabled and at full voltage before
VDD33 is enabled.
Reorder the bulk regulator supply names so that VDD12 is enabled before
VDD33. Any enable ramp delays should be handled by setting proper
constraints on the regulators.
Fixes:
bc1aee7fc8f0 ("drm/bridge: Add I2C based driver for ps8640 bridge")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220721092258.3397461-1-wenst@chromium.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Maxime Ripard [Mon, 11 Jul 2022 17:38:31 +0000 (19:38 +0200)]
drm/mipi-dsi: Detach devices when removing the host
[ Upstream commit
668a8f17b5290d04ef7343636a5588a0692731a1 ]
Whenever the MIPI-DSI host is unregistered, the code of
mipi_dsi_host_unregister() loops over every device currently found on that
bus and will unregister it.
However, it doesn't detach it from the bus first, which leads to all kind
of resource leaks if the host wants to perform some clean up whenever a
device is detached.
Fixes:
068a00233969 ("drm: Add MIPI DSI bus support")
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220711173939.1132294-2-maxime@cerno.tech
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dan Carpenter [Mon, 4 Jul 2022 10:55:40 +0000 (13:55 +0300)]
drm/bridge: Avoid uninitialized variable warning
[ Upstream commit
7d1202738efda60155d98b370b3c70d336be0eea ]
This code works, but technically it uses "num_in_bus_fmts" before it
has been initialized so it leads to static checker warnings and probably
KMEMsan warnings at run time. Initialize the variable to zero to
silence the warning.
Fixes:
f32df58acc68 ("drm/bridge: Add the necessary bits to support bus format negotiation")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/YrrIs3hoGcPVmXc5@kili
Signed-off-by: Sasha Levin <sashal@kernel.org>
projects / linux-2.6-block.git / log