habanalabs: set clock gating according to mask

[ Upstream commit f44d23b9095abd91dad9f5f3add2a3149833ec83 ]

Once clock gating is set we enable clock gating according to mask,
we should also disable clock gating according to relevant bits.

Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

habanalabs: validate packet id during CB parse

[ Upstream commit bc75be24fa88ef10eecaff2b2a9ada8189e5ab5d ]

During command buffer parsing, driver extracts packet id
from user buffer. Driver must validate this packet id, since it is
being used in order to extract information from internal structures.

Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

habanalabs: unmap PCI bars upon iATU failure

[ Upstream commit f1aae40e8dbd2655e3b10cae381a1e8292b19d57 ]

In case the driver fails to configure the PCI controller iATU, it needs to
unmap the PCI bars before exiting so if the driver is removed, the bars
won't be left mapped.

Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm: enable vblank during atomic commits

[ Upstream commit 43906812eaab06423f56af5cca9a9fcdbb4ac454 ]

This has roughly the same effect as drm_atomic_helper_wait_for_vblanks(),
basically just ensuring that vblank accounting is enabled so that we get
valid timestamp/seqn on pageflip events.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Tested-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvmet: Disable keep-alive timer when kato is cleared to 0h

[ Upstream commit 0d3b6a8d213a30387b5104b2fb25376d18636f23 ]

Based on nvme spec, when keep alive timeout is set to zero
the keep-alive timer should be disabled.

Signed-off-by: Amit Engel <amit.engel@dell.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hwmon: (applesmc) check status earlier.

[ Upstream commit cecf7560f00a8419396a2ed0f6e5d245ccb4feac ]

clang static analysis reports this representative problem

applesmc.c:758:10: warning: 1st function call argument is an
  uninitialized value
        left = be16_to_cpu(*(__be16 *)(buffer + 6)) >> 2;
               ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

buffer is filled by the earlier call

ret = applesmc_read_key(LIGHT_SENSOR_LEFT_KEY, ...

This problem is reported because a goto skips the status check.
Other similar problems use data from applesmc_read_key before checking
the status.  So move the checks to before the use.

Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Henrik Rydberg <rydberg@bitmath.org>
Link: https://lore.kernel.org/r/20200820131932.10590-1-trix@redhat.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm: add shutdown support for display platform_driver

[ Upstream commit 9d5cbf5fe46e350715389d89d0c350d83289a102 ]

Define shutdown callback for display drm driver,
so as to disable all the CRTCS when shutdown
notification is received by the driver.

This change will turn off the timing engine so
that no display transactions are requested
while mmu translations are getting disabled
during reboot sequence.

Signed-off-by: Krishna Manikandan <mkrishn@codeaurora.org>
Changes in v2:
- Remove NULL check from msm_pdev_shutdown (Stephen Boyd)
- Change commit text to reflect when this issue
  was uncovered (Sai Prakash Ranjan)

Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tty: serial: qcom_geni_serial: Drop __init from qcom_geni_console_setup

[ Upstream commit 975efc66d4e654207c17f939eb737ac591ac38fe ]

When booting with heavily modularized config, the serial console
may not be able to load until after init when modules that
satisfy needed dependencies have time to load.

Unfortunately, as qcom_geni_console_setup is marked as __init,
the function may have been freed before we get to run it,
causing boot time crashes such as:

[    6.469057] Unable to handle kernel paging request at virtual address ffffffe645d4e6cc
[    6.481623] Mem abort info:
[    6.484466]   ESR = 0x86000007
[    6.487557]   EC = 0x21: IABT (current EL), IL = 32 bits
[    6.492929]   SET = 0, FnV = 0g
[    6.496016]   EA = 0, S1PTW = 0
[    6.499202] swapper pgtable: 4k pages, 39-bit VAs, pgdp=000000008151e000
[    6.501286] ufshcd-qcom 1d84000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[3, 3], lane[2, 2], pwr[FAST MODE, FAST MODE], rate = 2
[    6.505977] [ffffffe645d4e6cc] pgd=000000017df9f003, p4d=000000017df9f003, pud=000000017df9f003, pmd=000000017df9c003, pte=0000000000000000
[    6.505990] Internal error: Oops: 86000007 [#1] PREEMPT SMP
[    6.505995] Modules linked in: zl10353 zl10039 zl10036 zd1301_demod xc5000 xc4000 ves1x93 ves1820 tuner_xc2028 tuner_simple tuner_types tua9001 tua6100 1
[    6.506152]  isl6405
[    6.518104] ufshcd-qcom 1d84000.ufshc: ufshcd_find_max_sup_active_icc_level: Regulator capability was not set, actvIccLevel=0
[    6.530549]  horus3a helene fc2580 fc0013 fc0012 fc0011 ec100 e4000 dvb_pll ds3000 drxk drxd drx39xyj dib9000 dib8000 dib7000p dib7000m dib3000mc dibx003
[    6.624271] CPU: 7 PID: 148 Comm: kworker/7:2 Tainted: G        W       5.8.0-mainline-12021-g6defd37ba1cd #3455
[    6.624273] Hardware name: Thundercomm Dragonboard 845c (DT)
[    6.624290] Workqueue: events deferred_probe_work_func
[    6.624296] pstate: 40c00005 (nZcv daif +PAN +UAO BTYPE=--)
[    6.624307] pc : qcom_geni_console_setup+0x0/0x110
[    6.624316] lr : try_enable_new_console+0xa0/0x140
[    6.624318] sp : ffffffc010843a30
[    6.624320] x29: ffffffc010843a30 x28: ffffffe645c3e7d0
[    6.624325] x27: ffffff80f8022180 x26: ffffffc010843b28
[    6.637937] x25: 0000000000000000 x24: ffffffe6462a2000
[    6.637941] x23: ffffffe646398000 x22: 0000000000000000
[    6.637945] x21: 0000000000000000 x20: ffffffe6462a5ce8
[    6.637952] x19: ffffffe646398e38 x18: ffffffffffffffff
[    6.680296] x17: 0000000000000000 x16: ffffffe64492b900
[    6.680300] x15: ffffffe6461e9d08 x14: 69202930203d2064
[    6.680305] x13: 7561625f65736162 x12: 202c363331203d20
[    6.696434] x11: 0000000000000030 x10: 0101010101010101
[    6.696438] x9 : 4d4d20746120304d x8 : 7f7f7f7f7f7f7f7f
[    6.707249] x7 : feff4c524c787373 x6 : 0000000000008080
[    6.707253] x5 : 0000000000000000 x4 : 8080000000000000
[    6.707257] x3 : 0000000000000000 x2 : ffffffe645d4e6cc
[    6.744223] qcom_geni_serial 898000.serial: dev_pm_opp_set_rate: failed to find OPP for freq 102400000 (-34)
[    6.744966] x1 : fffffffefe74e174 x0 : ffffffe6462a5ce8
[    6.753580] qcom_geni_serial 898000.serial: dev_pm_opp_set_rate: failed to find OPP for freq 102400000 (-34)
[    6.761634] Call trace:
[    6.761639]  qcom_geni_console_setup+0x0/0x110
[    6.761645]  register_console+0x29c/0x2f8
[    6.767981] Bluetooth: hci0: Frame reassembly failed (-84)
[    6.775252]  uart_add_one_port+0x438/0x500
[    6.775258]  qcom_geni_serial_probe+0x2c4/0x4a8
[    6.775266]  platform_drv_probe+0x58/0xa8
[    6.855359]  really_probe+0xec/0x398
[    6.855362]  driver_probe_device+0x5c/0xb8
[    6.855367]  __device_attach_driver+0x98/0xb8
[    7.184945]  bus_for_each_drv+0x74/0xd8
[    7.188825]  __device_attach+0xec/0x148
[    7.192705]  device_initial_probe+0x24/0x30
[    7.196937]  bus_probe_device+0x9c/0xa8
[    7.200816]  deferred_probe_work_func+0x7c/0xb8
[    7.205398]  process_one_work+0x20c/0x4b0
[    7.209456]  worker_thread+0x48/0x460
[    7.213157]  kthread+0x14c/0x158
[    7.216432]  ret_from_fork+0x10/0x18
[    7.220049] Code: bad PC value
[    7.223139] ---[ end trace 73f3b21e251d5a70 ]---

Thus this patch removes the __init avoiding crash in such
configs.

Cc: Andy Gross <agross@kernel.org>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: Saravana Kannan <saravanak@google.com>
Cc: Todd Kjos <tkjos@google.com>
Cc: Amit Pundir <amit.pundir@linaro.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: linux-serial@vger.kernel.org
Suggested-by: Saravana Kannan <saravanak@google.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20200811025044.70626-1-john.stultz@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/dpu: fix unitialized variable error

[ Upstream commit 35c719da95c0d28560bff7bafeaf07ebb212665e ]

 drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c:817 dpu_crtc_enable() error: uninitialized symbol 'request_bandwidth'.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/dpu: Fix scale params in plane validation

[ Upstream commit 4c978caf08aa155bdeadd9e2d4b026d4ce97ebd0 ]

Plane validation uses an API drm_calc_scale which will
return src/dst value as a scale ratio.

when viewing the range on a scale the values should fall in as

Upscale ratio < Unity scale < Downscale ratio for src/dst formula

Fix the min and max scale ratios to suit the API accordingly.

Signed-off-by: Kalyan Thota <kalyan_t@codeaurora.org>
Tested-by: Kristian H. Kristensen <hoegsberg@google.com>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/dpu: Fix reservation failures in modeset

[ Upstream commit ccc862b957c6413b008fbe458034372847992d7f ]

In TEST_ONLY commit, rm global_state will duplicate the
object and request for new reservations, once they pass
then the new state will be swapped with the old and will
be available for the Atomic Commit.

This patch fixes some of missing links in the resource
reservation sequence mentioned above.

1) Creation of duplicate state in test_only commit (Rob)
2) Allocate and release the resources on every modeset.
3) Avoid allocation only when active is false.

In a modeset operation, swap state happens well before
disable. Hence clearing reservations in disable will
cause failures in modeset enable.

Allow reservations to be cleared/allocated before swap,
such that only newly committed resources are pushed to HW.

Changes in v1:
 - Move the rm release to atomic_check.
 - Ensure resource allocation and free happens when active
   is not changed i.e only when mode is changed.(Rob)

Changes in v2:
 - Handle dpu_kms_get_global_state API failure as it may
   return EDEADLK (swboyd).

Signed-off-by: Kalyan Thota <kalyan_t@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: quirks: Always poll three more Lenovo PixArt mice

[ Upstream commit 627a49975bdc3220f360a8237603a6344ee6a588 ]

The PixArt OEM mice are known for disconnecting every minute in
runlevel 1 or 3 if they are not always polled. One Lenovo PixArt
mouse is already fixed. Got two references for 17ef:602e and three
references for 17ef:6019 misbehaving like this. Got one direct bug
report for 17ef:6093 from Wyatt Ward (wyatt8740). So add
HID_QUIRK_ALWAYS_POLL for all of them.

Link: https://github.com/sriemer/fix-linux-mouse
Signed-off-by: Sebastian Parschauer <s.parschauer@gmx.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hwmon: (pmbus/isl68137) remove READ_TEMPERATURE_1 telemetry for RAA228228

[ Upstream commit 51fb91ed5a6fa855a74731610cd5435d83d6e17f ]

Per the RAA228228 datasheet, READ_TEMPERATURE_1 is not a supported PMBus
command.

Signed-off-by: Grant Peltier <grantpeltier93@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Linux 5.8.7

Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: target: tcmu: Optimize use of flush_dcache_page

commit 3c58f737231e2c8cbf543a09d84d8c8e80e05e43 upstream.

(scatter|gather)_data_area() need to flush dcache after writing data to or
before reading data from a page in uio data area.  The two routines are
able to handle data transfer to/from such a page in fragments and flush the
cache after each fragment was copied by calling the wrapper
tcmu_flush_dcache_range().

That means:

1) flush_dcache_page() can be called multiple times for the same page.

2) Calling flush_dcache_page() indirectly using the wrapper does not make
   sense, because each call of the wrapper is for one single page only and
   the calling routine already has the correct page pointer.

Change (scatter|gather)_data_area() such that, instead of calling
tcmu_flush_dcache_range() before/after each memcpy, it now calls
flush_dcache_page() before unmapping a page (when writing is complete for
that page) or after mapping a page (when starting to read the page).

After this change only calls to tcmu_flush_dcache_range() for addresses in
vmalloc'ed command ring are left over.

The patch was tested on ARM with kernel 4.19.118 and 5.7.2

Link: https://lore.kernel.org/r/20200618131632.32748-2-bstroesser@ts.fujitsu.com
Tested-by: JiangYu <lnsyyj@hotmail.com>
Tested-by: Daniel Meyerholt <dxm523@gmail.com>
Acked-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Bodo Stroesser <bstroesser@ts.fujitsu.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nl80211: fix NL80211_ATTR_HE_6GHZ_CAPABILITY usage

commit fce2ff728f95b8894db14f51c9274dc56c37616f upstream.

In nl80211_set_station(), we check NL80211_ATTR_HE_6GHZ_CAPABILITY
and then use NL80211_ATTR_HE_CAPABILITY, which is clearly wrong.
Fix this to use NL80211_ATTR_HE_6GHZ_CAPABILITY as well.

Cc: stable@vger.kernel.org
Fixes: 43e64bf301fd ("cfg80211: handle 6 GHz capability of new station")
Link: https://lore.kernel.org/r/20200805153516.310cef625955.I0abc04dc8abb2c7c005c88ef8fa2d0e3c9fb95c4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sdhci: tegra: Remove SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK for Tegra186

commit 391d89dba8c290859a3e29430d0b9e32c358bb0d upstream.

commit 4346b7c7941d ("mmc: tegra: Add Tegra186 support")

SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK is set for Tegra186 from the
beginning of its support in driver.

Tegra186 SDMMC hardware by default uses timeout clock (TMCLK) instead
of SDCLK and this quirk should not be set.

So, this patch remove this quirk for Tegra186.

Fixes: 4346b7c7941d ("mmc: tegra: Add Tegra186 support")
Cc: stable <stable@vger.kernel.org> # 5.4
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Link: https://lore.kernel.org/r/1598548861-32373-3-git-send-email-skomatineni@nvidia.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sdhci: tegra: Remove SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK for Tegra210

commit e33588adcaa925c18ee2ea253161fb0317fa2329 upstream.

commit b5a84ecf025a ("mmc: tegra: Add Tegra210 support")

SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK is set for Tegra210 from the
beginning of Tegra210 support in the driver.

Tegra210 SDMMC hardware by default uses timeout clock (TMCLK)
instead of SDCLK and this quirk should not be set.

So, this patch remove this quirk for Tegra210.

Fixes: b5a84ecf025a ("mmc: tegra: Add Tegra210 support")
Cc: stable <stable@vger.kernel.org> # 5.4
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Link: https://lore.kernel.org/r/1598548861-32373-2-git-send-email-skomatineni@nvidia.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: tegra: Add missing timeout clock to Tegra210 SDMMC

commit 679f71fa0db2d777f39c7a5af7f7c0689fc713fa upstream.

commit 742af7e7a0a1 ("arm64: tegra: Add Tegra210 support")

Tegra210 uses separate SDMMC_LEGACY_TM clock for data timeout and
this clock is not enabled currently which is not recommended.

Tegra SDMMC advertises 12Mhz as timeout clock frequency in host
capability register.

So, this clock should be kept enabled by SDMMC driver.

Fixes: 742af7e7a0a1 ("arm64: tegra: Add Tegra210 support")
Cc: stable <stable@vger.kernel.org> # 5.4
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Link: https://lore.kernel.org/r/1598548861-32373-5-git-send-email-skomatineni@nvidia.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: tegra: Add missing timeout clock to Tegra186 SDMMC nodes

commit baba217d2c4446b6eef309d81d8776cb5c68cb55 upstream.

commit 39cb62cb8973 ("arm64: tegra: Add Tegra186 support")

Tegra186 uses separate SDMMC_LEGACY_TM clock for data timeout and
this clock is not enabled currently which is not recommended.

Tegra186 SDMMC advertises 12Mhz as timeout clock frequency in host
capability register and uses it by default.

So, this clock should be kept enabled by the SDMMC driver.

Fixes: 39cb62cb8973 ("arm64: tegra: Add Tegra186 support")
Cc: stable <stable@vger.kernel.org> # 5.4
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Link: https://lore.kernel.org/r/1598548861-32373-6-git-send-email-skomatineni@nvidia.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: tegra: Add missing timeout clock to Tegra194 SDMMC nodes

commit c956c0cd4f6f4aac4f095621b1c4e1c5ee1df877 upstream.

commit 5425fb15d8ee ("arm64: tegra: Add Tegra194 chip device tree")

Tegra194 uses separate SDMMC_LEGACY_TM clock for data timeout and
this clock is not enabled currently which is not recommended.

Tegra194 SDMMC advertises 12Mhz as timeout clock frequency in host
capability register.

So, this clock should be kept enabled by SDMMC driver.

Fixes: 5425fb15d8ee ("arm64: tegra: Add Tegra194 chip device tree")
Cc: stable <stable@vger.kernel.org> # 5.4
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Link: https://lore.kernel.org/r/1598548861-32373-7-git-send-email-skomatineni@nvidia.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dt-bindings: mmc: tegra: Add tmclk for Tegra210 and later

commit f7f86e8ac0ad7cd6792a80137f5a550924966916 upstream.

commit b5a84ecf025a ("mmc: tegra: Add Tegra210 support")

Tegra210 and later uses separate SDMMC_LEGACY_TM clock for data
timeout.

So, this patch adds "tmclk" to Tegra sdhci clock property in the
device tree binding.

Fixes: b5a84ecf025a ("mmc: tegra: Add Tegra210 support")
Cc: stable <stable@vger.kernel.org> # 5.4
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Link: https://lore.kernel.org/r/1598548861-32373-4-git-send-email-skomatineni@nvidia.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: arm64: Survive synchronous exceptions caused by AT instructions

commit 88a84ccccb3966bcc3f309cdb76092a9892c0260 upstream.

KVM doesn't expect any synchronous exceptions when executing, any such
exception leads to a panic(). AT instructions access the guest page
tables, and can cause a synchronous external abort to be taken.

The arm-arm is unclear on what should happen if the guest has configured
the hardware update of the access-flag, and a memory type in TCR_EL1 that
does not support atomic operations. B2.2.6 "Possible implementation
restrictions on using atomic instructions" from DDI0487F.a lists
synchronous external abort as a possible behaviour of atomic instructions
that target memory that isn't writeback cacheable, but the page table
walker may behave differently.

Make KVM robust to synchronous exceptions caused by AT instructions.
Add a get_user() style helper for AT instructions that returns -EFAULT
if an exception was generated.

While KVM's version of the exception table mixes synchronous and
asynchronous exceptions, only one of these can occur at each location.

Re-enter the guest when the AT instructions take an exception on the
assumption the guest will take the same exception. This isn't guaranteed
to make forward progress, as the AT instructions may always walk the page
tables, but guest execution may use the translation cached in the TLB.

This isn't a problem, as since commit 5dcd0fdbb492 ("KVM: arm64: Defer guest
entry when an asynchronous exception is pending"), KVM will return to the
host to process IRQs allowing the rest of the system to keep running.

Cc: stable@vger.kernel.org # <v5.3: 5dcd0fdbb492 ("KVM: arm64: Defer guest entry when an asynchronous exception is pending")
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: arm64: Add kvm_extable for vaxorcism code

commit e9ee186bb735bfc17fa81dbc9aebf268aee5b41e upstream.

KVM has a one instruction window where it will allow an SError exception
to be consumed by the hypervisor without treating it as a hypervisor bug.
This is used to consume asynchronous external abort that were caused by
the guest.

As we are about to add another location that survives unexpected exceptions,
generalise this code to make it behave like the host's extable.

KVM's version has to be mapped to EL2 to be accessible on nVHE systems.

The SError vaxorcism code is a one instruction window, so has two entries
in the extable. Because the KVM code is copied for VHE and nVHE, we end up
with four entries, half of which correspond with code that isn't mapped.

Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: media/v4l2-core: Fix kernel-infoleak in video_put_user()

commit 4ffb879ea648c2b42da4ca992ed3db87e564af69 upstream.

video_put_user() is copying uninitialized stack memory to userspace due
to the compiler not initializing holes in the structures declared on the
stack. Fix it by initializing `ev32` and `vb32` using memset().

Reported-and-tested-by: syzbot+79d751604cb6f29fbf59@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?extid=79d751604cb6f29fbf59
Cc: stable@vger.kernel.org
Fixes: 1a6c0b36dd19 ("media: v4l2-core: fix VIDIOC_DQEVENT for time64 ABI")
Fixes: 577c89b0ce72 ("media: v4l2-core: fix v4l2_buffer handling for time64 ABI")
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf record/stat: Explicitly call out event modifiers in the documentation

commit e48a73a312ebf19cc3d72aa74985db25c30757c1 upstream.

Event modifiers are not mentioned in the perf record or perf stat
manpages.  Add them to orient new users more effectively by pointing
them to the perf list manpage for details.

Fixes: 2055fdaf8703 ("perf list: Document precise event sampling for AMD IBS")
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tony Jones <tonyj@suse.de>
Cc: stable@vger.kernel.org
Link: http://lore.kernel.org/lkml/20200901215853.276234-1-kim.phillips@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests/x86/test_vsyscall: Improve the process_vm_readv() test

commit 8891adc61dce2a8a41fc0c23262b681c3ec4b73a upstream.

The existing code accepted process_vm_readv() success or failure as long
as it didn't return garbage.  This is too weak: if the vsyscall page is
readable, then process_vm_readv() should succeed and, if the page is not
readable, then it should fail.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: x86@kernel.org
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Jann Horn <jannh@google.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: fix pin vs. gup mismatch with gate pages

commit 9fa2dd946743ae6f30dc4830da19147bf100a7f2 upstream.

Gate pages were missed when converting from get to pin_user_pages().
This can lead to refcount imbalances.  This is reliably and quickly
reproducible running the x86 selftests when vsyscall=emulate is enabled
(the default).  Fix by using try_grab_page() with appropriate flags
passed.

The long story:

Today, pin_user_pages() and get_user_pages() are similar interfaces for
manipulating page reference counts.  However, "pins" use a "bias" value
and manipulate the actual reference count by 1024 instead of 1 used by
plain "gets".

That means that pin_user_pages() must be matched with unpin_user_pages()
and can't be mixed with a plain put_user_pages() or put_page().

Enter gate pages, like the vsyscall page.  They are pages usually in the
kernel image, but which are mapped to userspace.  Userspace is allowed
access to them, including interfaces using get/pin_user_pages().  The
refcount of these kernel pages is manipulated just like a normal user
page on the get/pin side so that the put/unpin side can work the same
for normal user pages or gate pages.

get_gate_page() uses try_get_page() which only bumps the refcount by
1, not 1024, even if called in the pin_user_pages() path.  If someone
pins a gate page, this happens:

pin_user_pages()
get_gate_page()
try_get_page() // bump refcount +1
... some time later
unpin_user_pages()
page_ref_sub_and_test(page, 1024))

... and boom, we get a refcount off by 1023.  This is reliably and
quickly reproducible running the x86 selftests when booted with
vsyscall=emulate (the default).  The selftests use ptrace(), but I
suspect anything using pin_user_pages() on gate pages could hit this.

To fix it, simply use try_grab_page() instead of try_get_page(), and
pass 'gup_flags' in so that FOLL_PIN can be respected.

This bug traces back to the very beginning of the FOLL_PIN support in
commit 3faa52c03f44 ("mm/gup: track FOLL_PIN pages"), which showed up in
the 5.7 release.

Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Fixes: 3faa52c03f44 ("mm/gup: track FOLL_PIN pages")
Reported-by: Peter Zijlstra <peterz@infradead.org>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: Andy Lutomirski <luto@kernel.org>
Cc: x86@kernel.org
Cc: Jann Horn <jannh@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: nft_set_rbtree: Handle outcomes of tree rotations in overlap detection

commit 226a88de473e475cb9f993682a1c7d0c2b451ad8 upstream.

Checks for partial overlaps on insertion assume that end elements
are always descendant nodes of their corresponding start, because
they are inserted later. However, this is not the case if a
previous delete operation caused a tree rotation as part of
rebalancing.

Taking the issue reported by Andreas Fischer as an example, if we
omit delete operations, the existing procedure works because,
equivalently, we are inserting a start item with value 40 in the
this region of the red-black tree with single-sized intervals:

                                  overlap flag
                   10 (start)
                  /  \            false
                      20 (start)
                     /  \         false
                         30 (start)
                        /  \      false
                            60 (start)
                           /  \   false
                         50 (end)
                        /  \      false
                      20 (end)
                     /  \         false
                         40 (start)

if we now delete interval 30 - 30, the tree can be rearranged in
a way similar to this (note the rotation involving 50 - 50):

                                  overlap flag
                   10 (start)
                  /  \            false
                      20 (start)
                     /  \         false
                         25 (start)
                        /  \      false
                            70 (start)
                           /  \   false
                         50 (end)
                        /  \      true (from rule a1.)
                      50 (start)
                     /  \         true
                   40 (start)

and we traverse interval 50 - 50 from the opposite direction
compared to what was expected.

To deal with those cases, add a start-before-start rule, b4.,
that covers traversal of existing intervals from the right.

We now need to restrict start-after-end rule b3. to cases
where there are no occurring nodes between existing start and
end elements, because addition of rule b4. isn't sufficient to
ensure that the pre-existing end element we encounter while
descending the tree corresponds to a start element of an
interval that we already traversed entirely.

Different types of overlap detection on trees with rotations
resulting from re-balancing will be covered by nft test case
sets/0044interval_overlap_1.

Reported-by: Andreas Fischer <netfilter@d9c.eu>
Bugzilla: https://bugzilla.netfilter.org/show_bug.cgi?id=1449
Cc: <stable@vger.kernel.org> # 5.6.x
Fixes: 7c84d41416d8 ("netfilter: nft_set_rbtree: Detect partial overlaps on insertion")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: core: Sanitize event code and type when mapping input

commit 35556bed836f8dc07ac55f69c8d17dce3e7f0e25 upstream.

When calling into hid_map_usage(), the passed event code is
blindly stored as is, even if it doesn't fit in the associated bitmap.

This event code can come from a variety of sources, including devices
masquerading as input devices, only a bit more "programmable".

Instead of taking the event code at face value, check that it actually
fits the corresponding bitmap, and if it doesn't:
- spit out a warning so that we know which device is acting up
- NULLify the bitmap pointer so that we catch unexpected uses

Code paths that can make use of untrusted inputs can now check
that the mapping was indeed correct and bail out if not.

Cc: stable@vger.kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: core: Correctly handle ReportSize being zero

commit bce1305c0ece3dc549663605e567655dd701752c upstream.

It appears that a ReportSize value of zero is legal, even if a bit
non-sensical. Most of the HID code seems to handle that gracefully,
except when computing the total size in bytes. When fed as input to
memset, this leads to some funky outcomes.

Detect the corner case and correctly compute the size.

Cc: stable@vger.kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 5.8.6

Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: usb-audio: Update documentation comment for MS2109 quirk

commit 74a2a7de81a2ef20732ec02087314e92692a7a1b upstream.

As the recent fix addressed the channel swap problem more properly,
update the comment as well.

Fixes: 1b7ecc241a67 ("ALSA: usb-audio: work around streaming quirk for MacroSilicon MS2109")
Signed-off-by: Hector Martin <marcan@marcan.st>
Link: https://lore.kernel.org/r/20200816084431.102151-1-marcan@marcan.st
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dma-pool: Fix an uninitialized variable bug in atomic_pool_expand()

commit 892fc9f6835ecf075efac20789b012c5c9997fcc upstream.

The "page" pointer can be used with out being initialized.

Fixes: d7e673ec2c8e ("dma-pool: Only allocate from CMA when in same memory zone")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/vmwgfx/ldu: Use drm_mode_config_reset

commit 981243371a5d832af5bc572071172e955d02fe88 upstream.

Same problem as in stdu, same fix.

Fixes: 51f644b40b4b ("drm/atomic-helper: reset vblank on crtc reset")
Acked-by: Charmaine Lee <charmainel@vmware.com>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Signed-off-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/vmwgfx/sou: Use drm_mode_config_reset

commit 1338441cf166e2ef789af5915b961d4e13a4ec31 upstream.

Same problem as in stdu, same fix.

Fixes: 51f644b40b4b ("drm/atomic-helper: reset vblank on crtc reset")
Acked-by: Charmaine Lee <charmainel@vmware.com>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Signed-off-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/vmwgfx/stdu: Use drm_mode_config_reset

commit 68745d1edf1700a668c15ecbed466d18f14c7e9b upstream.

When converting to atomic the state reset was done by directly calling
the functions, and before the modeset object was fully initialized.
This means the various ->dev pointers weren't set up.

After

commit 51f644b40b4b794b28b982fdd5d0dd8ee63f9272
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Fri Jun 12 18:00:49 2020 +0200

    drm/atomic-helper: reset vblank on crtc reset

this started to oops because now we're trying to derefence
drm_crtc->dev. Fix this up by entirely switching over to
drm_mode_config_reset, called once everything is set up.

Fixes: 51f644b40b4b ("drm/atomic-helper: reset vblank on crtc reset")
Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Tested-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: hiddev: Fix slab-out-of-bounds write in hiddev_ioctl_usage()

commit 25a097f5204675550afb879ee18238ca917cba7a upstream.

`uref->usage_index` is not always being properly checked, causing
hiddev_ioctl_usage() to go out of bounds under some cases. Fix it.

Reported-by: syzbot+34ee1b45d88571c2fa8b@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?id=f2aebe90b8c56806b050a20b36f51ed6acabe802
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/page_counter: fix various data races at memsw

commit 6e4bd50f3888fa8fea8bc66a0ad4ad5f1c862961 upstream.

Commit 3e32cb2e0a12 ("mm: memcontrol: lockless page counters") could had
memcg->memsw->watermark and memcg->memsw->failcnt been accessed
concurrently as reported by KCSAN,

 BUG: KCSAN: data-race in page_counter_try_charge / page_counter_try_charge

 read to 0xffff8fb18c4cd190 of 8 bytes by task 1081 on cpu 59:
  page_counter_try_charge+0x4d/0x150 mm/page_counter.c:138
  try_charge+0x131/0xd50 mm/memcontrol.c:2405
  __memcg_kmem_charge_memcg+0x58/0x140
  __memcg_kmem_charge+0xcc/0x280
  __alloc_pages_nodemask+0x1e1/0x450
  alloc_pages_current+0xa6/0x120
  pte_alloc_one+0x17/0xd0
  __pte_alloc+0x3a/0x1f0
  copy_p4d_range+0xc36/0x1990
  copy_page_range+0x21d/0x360
  dup_mmap+0x5f5/0x7a0
  dup_mm+0xa2/0x240
  copy_process+0x1b3f/0x3460
  _do_fork+0xaa/0xa20
  __x64_sys_clone+0x13b/0x170
  do_syscall_64+0x91/0xb47
  entry_SYSCALL_64_after_hwframe+0x49/0xbe

 write to 0xffff8fb18c4cd190 of 8 bytes by task 1153 on cpu 120:
  page_counter_try_charge+0x5b/0x150 mm/page_counter.c:139
  try_charge+0x131/0xd50 mm/memcontrol.c:2405
  mem_cgroup_try_charge+0x159/0x460
  mem_cgroup_try_charge_delay+0x3d/0xa0
  wp_page_copy+0x14d/0x930
  do_wp_page+0x107/0x7b0
  __handle_mm_fault+0xce6/0xd40
  handle_mm_fault+0xfc/0x2f0
  do_page_fault+0x263/0x6f9
  page_fault+0x34/0x40

 BUG: KCSAN: data-race in page_counter_try_charge / page_counter_try_charge

 write to 0xffff88809bbf2158 of 8 bytes by task 11782 on cpu 0:
  page_counter_try_charge+0x100/0x170 mm/page_counter.c:129
  try_charge+0x185/0xbf0 mm/memcontrol.c:2405
  __memcg_kmem_charge_memcg+0x4a/0xe0 mm/memcontrol.c:2837
  __memcg_kmem_charge+0xcf/0x1b0 mm/memcontrol.c:2877
  __alloc_pages_nodemask+0x26c/0x310 mm/page_alloc.c:4780

 read to 0xffff88809bbf2158 of 8 bytes by task 11814 on cpu 1:
  page_counter_try_charge+0xef/0x170 mm/page_counter.c:129
  try_charge+0x185/0xbf0 mm/memcontrol.c:2405
  __memcg_kmem_charge_memcg+0x4a/0xe0 mm/memcontrol.c:2837
  __memcg_kmem_charge+0xcf/0x1b0 mm/memcontrol.c:2877
  __alloc_pages_nodemask+0x26c/0x310 mm/page_alloc.c:4780

Since watermark could be compared or set to garbage due to a data race
which would change the code logic, fix it by adding a pair of READ_ONCE()
and WRITE_ONCE() in those places.

The "failcnt" counter is tolerant of some degree of inaccuracy and is only
used to report stats, a data race will not be harmful, thus mark it as an
intentional data race using the data_race() macro.

Fixes: 3e32cb2e0a12 ("mm: memcontrol: lockless page counters")
Reported-by: syzbot+f36cfe60b1006a94f9dc@syzkaller.appspotmail.com
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Marco Elver <elver@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Link: http://lkml.kernel.org/r/1581519682-23594-1-git-send-email-cai@lca.pw
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fbmem: pull fbcon_update_vcs() out of fb_set_var()

[ Upstream commit d88ca7e1a27eb2df056bbf37ddef62e1c73d37ea ]

syzbot is reporting OOB read bug in vc_do_resize() [1] caused by memcpy()
based on outdated old_{rows,row_size} values, for resize_screen() can
recurse into vc_do_resize() which changes vc->vc_{cols,rows} that outdates
old_{rows,row_size} values which were saved before calling resize_screen().

Daniel Vetter explained that resize_screen() should not recurse into
fbcon_update_vcs() path due to FBINFO_MISC_USEREVENT being still set
when calling resize_screen().

Instead of masking FBINFO_MISC_USEREVENT before calling fbcon_update_vcs(),
we can remove FBINFO_MISC_USEREVENT by calling fbcon_update_vcs() only if
fb_set_var() returned 0. This change assumes that it is harmless to call
fbcon_update_vcs() when fb_set_var() returned 0 without reaching
fb_notifier_call_chain().

[1] https://syzkaller.appspot.com/bug?id=c70c88cfd16dcf6e1d3c7f0ab8648b3144b5b25e

Reported-and-tested-by: syzbot <syzbot+c37a14770d51a085a520@syzkaller.appspotmail.com>
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reported-by: kernel test robot <lkp@intel.com> for missing #include
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/075b7e37-3278-cd7d-31ab-c5073cfa8e92@i-love.sakura.ne.jp
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/atomic-helper: reset vblank on crtc reset

[ Upstream commit 51f644b40b4b794b28b982fdd5d0dd8ee63f9272 ]

Only when vblanks are supported ofc.

Some drivers do this already, but most unfortunately missed it. This
opens up bugs after driver load, before the crtc is enabled for the
first time. syzbot spotted this when loading vkms as a secondary
output. Given how many drivers are buggy it's best to solve this once
and for all in shared helper code.

Aside from moving the few existing calls to drm_crtc_vblank_reset into
helpers (i915 doesn't use helpers, so keeps its own) I think the
regression risk is minimal: atomic helpers already rely on drivers
calling drm_crtc_vblank_on/off correctly in their hooks when they
support vblanks. And driver that's failing to handle vblanks after
this is missing those calls already, and vblanks could only work by
accident when enabling a CRTC for the first time right after boot.

Big thanks to Tetsuo for helping track down what's going wrong here.

There's only a few drivers which already had the necessary call and
needed some updating:
- komeda, atmel and tidss also needed to be changed to call
  __drm_atomic_helper_crtc_reset() intead of open coding it
- tegra and msm even had it in the same place already, just code
  motion, and malidp already uses __drm_atomic_helper_crtc_reset().
- Laurent noticed that rcar-du and omap open-code their crtc reset and
  hence would actually be broken by this patch now. So fix them up by
  reusing the helpers, which brings the drm_crtc_vblank_reset() back.

Only call left is in i915, which doesn't use drm_mode_config_reset,
but has its own fastboot infrastructure. So that's the only case where
we actually want this in the driver still.

I've also reviewed all other drivers which set up vblank support with
drm_vblank_init. After the previous patch fixing mxsfb all atomic
drivers do call drm_crtc_vblank_on/off as they should, the remaining
drivers are either legacy kms or legacy dri1 drivers, so not affected
by this change to atomic helpers.

v2: Use the drm_dev_has_vblank() helper.

v3: Laurent pointed out that omap and rcar-du used drm_crtc_vblank_off
instead of drm_crtc_vblank_reset. Adjust them too.

v4: Laurent noticed that rcar-du and omap open-code their crtc reset
and hence would actually be broken by this patch now. So fix them up
by reusing the helpers, which brings the drm_crtc_vblank_reset() back.

v5: also mention rcar-du and ompadrm in the proper commit message
above (Laurent).

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://syzkaller.appspot.com/bug?id=0ba17d70d062b2595e1f061231474800f076c7cb
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reported-by: syzbot+0871b14ca2e2fb64f6e3@syzkaller.appspotmail.com
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: "James (Qian) Wang" <james.qian.wang@arm.com>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Mihail Atanassov <mihail.atanassov@arm.com>
Cc: Brian Starkey <brian.starkey@arm.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Boris Brezillon <bbrezillon@kernel.org>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Ludovic Desroches <ludovic.desroches@microchip.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: Jyri Sarha <jsarha@ti.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Brian Masney <masneyb@onstation.org>
Cc: Emil Velikov <emil.velikov@collabora.com>
Cc: zhengbin <zhengbin13@huawei.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-tegra@vger.kernel.org
Cc: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-renesas-soc@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200612160056.2082681-1-daniel.vetter@ffwll.ch
Signed-off-by: Sasha Levin <sashal@kernel.org>

io_uring: make offset == -1 consistent with preadv2/pwritev2

[ Upstream commit 0fef948363f62494d779cf9dc3c0a86ea1e5f7cd ]

The man page for io_uring generally claims were consistent with what
preadv2 and pwritev2 accept, but turns out there's a slight discrepancy
in how offset == -1 is handled for pipes/streams. preadv doesn't allow
it, but preadv2 does. This currently causes io_uring to return -EINVAL
if that is attempted, but we should allow that as documented.

This change makes us consistent with preadv2/pwritev2 for just passing
in a NULL ppos for streams if the offset is -1.

Cc: stable@vger.kernel.org # v5.7+
Reported-by: Benedikt Ames <wisp3rwind@posteo.eu>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

io_uring: don't use poll handler if file can't be nonblocking read/written

[ Upstream commit 9dab14b81807a40dab8e464ec87043935c562c2c ]

There's no point in using the poll handler if we can't do a nonblocking
IO attempt of the operation, since we'll need to go async anyway. In
fact this is actively harmful, as reading from eg pipes won't return 0
to indicate EOF.

Cc: stable@vger.kernel.org # v5.7+
Reported-by: Benedikt Ames <wisp3rwind@posteo.eu>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

io_uring: don't recurse on tsk->sighand->siglock with signalfd

[ Upstream commit fd7d6de2241453fc7d042336d366a939a25bc5a9 ]

If an application is doing reads on signalfd, and we arm the poll handler
because there's no data available, then the wakeup can recurse on the
tasks sighand->siglock as the signal delivery from task_work_add() will
use TWA_SIGNAL and that attempts to lock it again.

We can detect the signalfd case pretty easily by comparing the poll->head
wait_queue_head_t with the target task signalfd wait queue. Just use
normal task wakeup for this case.

Cc: stable@vger.kernel.org # v5.7+
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: typec: tcpm: Fix Fix source hard reset response for TDA 2.3.1.1 and TDA 2.3.1.2 failures

commit 23e26d0577535f5ffe4ff8ed6d06e009553c0bca upstream.

The patch addresses the compliance test failures while running  TDA
2.3.1.1 and  TDA 2.3.1.2 of the "PD Communications Engine USB PD
Compliance MOI" test plan published in https://www.usb.org/usbc.
For a product to be Type-C compliant, it's expected that these tests
are run on usb.org certified Type-C compliance tester as mentioned in
https://www.usb.org/usbc.

While the purpose of TDA 2.3.1.1 and  TDA 2.3.1.2 is to verify that
the static and dynamic electrical capabilities of a Source meet the
requirements for each PDO offered,  while doing so, the tests also
monitor that the timing of the VBUS waveform versus the messages meets
the requirements for Hard Reset defined in PROT-PROC-HR-TSTR as
mentioned in step 11 of TDA.2.3.1.1 and step 15 of TDA.2.3.1.2.

TDB.2.2.13.1: PROT-PROC-HR-TSTR Procedure and Checks for Tester
Originated Hard Reset
Purpose: To perform the appropriate protocol checks relating to any
circumstance in which the Hard Reset signal is sent by the Tester.

UUT is behaving as source:
The Tester sends a Hard Reset signal.
1. Check VBUS stays within present valid voltage range for
tPSHardReset min (25ms) after last bit of Hard Reset signal.
[PROT_PROC_HR_TSTR_1]
2. Check that VBUS starts to fall below present valid voltage range by
tPSHardReset max (35ms). [PROT_PROC_HR_TSTR_2]
3. Check that VBUS reaches vSafe0V within tSafe0v max (650 ms).
[PROT_PROC_HR_TSTR_3]
4. Check that VBUS starts rising to vSafe5V after a delay of
tSrcRecover (0.66s - 1s) from reaching vSafe0V. [PROT_PROC_HR_TSTR_4]
5. Check that VBUS reaches vSafe5V within tSrcTurnOn max (275ms) of
rising above vSafe0v max (0.8V). [PROT_PROC_HR_TSTR_5] Power Delivery
Compliance Plan 139 6. Check that Source Capabilities are finished
sending within tFirstSourceCap max (250ms) of VBUS reaching vSafe5v
min. [PROT_PROC_HR_TSTR_6].

This is in line with 7.1.5 Response to Hard Resets of the USB Power
Delivery Specification Revision 3.0, Version 1.2,
"Hard Reset Signaling indicates a communication failure has occurred
and the Source Shall stop driving VCONN, Shall remove Rp from the
VCONN pin and Shall drive VBUS to vSafe0V as shown in Figure 7-9. The
USB connection May reset during a Hard Reset since the VBUS voltage
will be less than vSafe5V for an extended period of time. After
establishing the vSafe0V voltage condition on VBUS, the Source Shall
wait tSrcRecover before re-applying VCONN and restoring VBUS to
vSafe5V. A Source Shall conform to the VCONN timing as specified in
[USB Type-C 1.3]."

With the above guidelines from the spec in mind, TCPM does not turn
off VCONN while entering SRC_HARD_RESET_VBUS_OFF. The patch makes TCPM
turn off VCONN while entering SRC_HARD_RESET_VBUS_OFF and turn it back
on while entering SRC_HARD_RESET_VBUS_ON along with vbus instead of
having VCONN on through hardreset.

Also, the spec clearly states that "After establishing the vSafe0V
voltage condition on VBUS",  the Source Shall wait tSrcRecover before
re-applying VCONN and restoring VBUS to vSafe5V.
TCPM does not conform to this requirement. If the TCPC driver calls
tcpm_vbus_change with vbus off signal, TCPM right away enters
SRC_HARD_RESET_VBUS_ON without waiting for tSrcRecover.
For TCPC's which are buggy/does not call tcpm_vbus_change, TCPM
assumes that the vsafe0v is instantaneous as TCPM only waits
tSrcRecover instead of waiting for tSafe0v + tSrcRecover.
This patch also fixes this behavior by making sure that TCPM waits for
tSrcRecover before transitioning into SRC_HARD_RESET_VBUS_ON when
tcpm_vbus_change is called by TCPC.
When TCPC does not call tcpm_vbus_change, TCPM assumes the worst case
i.e.  tSafe0v + tSrcRecover before transitioning into
SRC_HARD_RESET_VBUS_ON.

Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20200817184601.1899929-1-badhri@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: typec: ucsi: Hold con->lock for the entire duration of ucsi_register_port()

commit bed97b30968ba354035a020989df0623e52b5536 upstream.

Commit 081da1325d35 ("usb: typec: ucsi: displayport: Fix a potential race
during registration") made the ucsi code hold con->lock in
ucsi_register_displayport(). But we really don't want any interactions
with the connector to run before the port-registration process is fully
complete.

This commit moves the taking of con->lock from ucsi_register_displayport()
into ucsi_register_port() to achieve this.

Cc: stable@vger.kernel.org
Fixes: 081da1325d35 ("usb: typec: ucsi: displayport: Fix a potential race during registration")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20200809141904.4317-5-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: typec: ucsi: Rework ppm_lock handling

commit 25794e3079d2a98547b6bf5764ef0240aa89b798 upstream.

The ppm_lock really only needs to be hold during 2 functions:
ucsi_reset_ppm() and ucsi_run_command().

Push the taking of the lock down into these 2 functions, renaming
ucsi_run_command() to ucsi_send_command() which was an existing
wrapper already taking the lock for its callers.

This simplifies things for the callers and removes the difference
between ucsi_send_command() and ucsi_run_command() which has led
to various locking bugs in the past.

Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20200809141904.4317-4-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: typec: ucsi: Fix 2 unlocked ucsi_run_command calls

commit 7e90057f125c8c852940b848e06e7a72f050fc6f upstream.

Fix 2 unlocked ucsi_run_command calls:

1. ucsi_handle_connector_change() contains one ucsi_send_command() call,
which takes the ppm_lock for it; and one ucsi_run_command() call which
relies on the caller have taking the ppm_lock.
ucsi_handle_connector_change() does not take the lock, so the
second (ucsi_run_command) calls should also be ucsi_send_command().

2. ucsi_get_pdos() gets called from ucsi_handle_connector_change() which
does not hold the ppm_lock, so it also must use ucsi_send_command().

This commit also adds a WARN_ON(!mutex_is_locked(&ucsi->ppm_lock)); to
ucsi_run_command() to avoid similar problems getting re-introduced in
the future.

Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20200809141904.4317-3-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: typec: ucsi: Fix AB BA lock inversion

commit 0ff0705a2ef2929e9326c95df48bdbebb0dafaad upstream.

Lockdep reports an AB BA lock inversion between ucsi_init() and
ucsi_handle_connector_change():

AB order:

1. ucsi_init takes ucsi->ppm_lock (it runs with that locked for the
   duration of the function)
2. usci_init eventually end up calling ucsi_register_displayport,
   which takes ucsi_connector->lock

BA order:

1. ucsi_handle_connector_change work is started, takes ucsi_connector->lock
2. ucsi_handle_connector_change calls ucsi_send_command which takes
   ucsi->ppm_lock

The ppm_lock really only needs to be hold during 2 functions:
ucsi_reset_ppm() and ucsi_run_command().

This commit fixes the AB BA lock inversion by making ucsi_init drop the
ucsi->ppm_lock before it starts registering ports; and replacing any
ucsi_run_command() calls after this point with ucsi_send_command()
(which is a wrapper around run_command taking the lock while handling
the command).

Some of the replacing of ucsi_run_command with ucsi_send_command
in the helpers used during port registration also fixes a number of
code paths after registration which call ucsi_run_command() without
holding the ppm_lock:
1. ucsi_altmode_update_active() call in ucsi/displayport.c
2. ucsi_register_altmodes() call from ucsi_handle_connector_change()
   (through ucsi_partner_change())

Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20200809141904.4317-2-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: Fix device driver race

commit d5643d2249b279077427b2c2b2ffae9b70c95b0b upstream.

When a new device with a specialised device driver is plugged in, the
new driver will be modprobe()'d but the driver core will attach the
"generic" driver to the device.

After that, nothing will trigger a reprobe when the modprobe()'d device
driver has finished initialising, as the device has the "generic"
driver attached to it.

Trigger a reprobe ourselves when new specialised drivers get registered.

Fixes: 88b7381a939d ("USB: Select better matching USB drivers when available")
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Cc: stable <stable@vger.kernel.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20200818110445.509668-3-hadess@hadess.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: Also match device drivers using the ->match vfunc

commit adb6e6ac20eedcf1dce19dc75b224e63c0828ea1 upstream.

We only ever used the ID table matching before, but we should also support
open-coded match functions.

Fixes: 88b7381a939de ("USB: Select better matching USB drivers when available")
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Cc: stable <stable@vger.kernel.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20200818110445.509668-1-hadess@hadess.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: storage: Add unusual_uas entry for Sony PSZ drives

commit 20934c0de13b49a072fb1e0ca79fe0fe0e40eae5 upstream.

The PSZ-HA* family of USB disk drives from Sony can't handle the
REPORT OPCODES command when using the UAS protocol.  This patch adds
an appropriate quirks entry.

Reported-and-tested-by: Till Dörges <doerges@pre-sense.de>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200826143229.GB400430@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: cdc-acm: rework notification_buffer resizing

commit f4b9d8a582f738c24ebeabce5cc15f4b8159d74e upstream.

Clang static analysis reports this error

cdc-acm.c:409:3: warning: Use of memory after it is freed
        acm_process_notification(acm, (unsigned char *)dr);

There are three problems, the first one is that dr is not reset

The variable dr is set with

if (acm->nb_index)
dr = (struct usb_cdc_notification *)acm->notification_buffer;

But if the notification_buffer is too small it is resized with

if (acm->nb_size) {
kfree(acm->notification_buffer);
acm->nb_size = 0;
}
alloc_size = roundup_pow_of_two(expected_size);
/*
 * kmalloc ensures a valid notification_buffer after a
 * use of kfree in case the previous allocation was too
 * small. Final freeing is done on disconnect.
 */
acm->notification_buffer =
kmalloc(alloc_size, GFP_ATOMIC);

dr should point to the new acm->notification_buffer.

The second problem is any data in the notification_buffer is lost
when the pointer is freed.  In the normal case, the current data
is accumulated in the notification_buffer here.

memcpy(&acm->notification_buffer[acm->nb_index],
       urb->transfer_buffer, copy_size);

When a resize happens, anything before
notification_buffer[acm->nb_index] is garbage.

The third problem is the acm->nb_index is not reset on a
resizing buffer error.

So switch resizing to using krealloc and reassign dr and
reset nb_index.

Fixes: ea2583529cd1 ("cdc-acm: reassemble fragmented notifications")
Signed-off-by: Tom Rix <trix@redhat.com>
Cc: stable <stable@vger.kernel.org>
Acked-by: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/20200801152154.20683-1-trix@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: dwc3: gadget: Handle ZLP for sg requests

commit bc9a2e226ea95e1699f7590845554de095308b75 upstream.

Currently dwc3 doesn't handle usb_request->zero for SG requests. This
change checks and prepares extra TRBs for the ZLP for SG requests.

Cc: <stable@vger.kernel.org> # v4.5+
Fixes: 04c03d10e507 ("usb: dwc3: gadget: handle request->zero")
Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: dwc3: gadget: Fix handling ZLP

commit d2ee3ff79e6a3d4105e684021017d100524dc560 upstream.

The usb_request->zero doesn't apply for isoc. Also, if we prepare a
0-length (ZLP) TRB for the OUT direction, we need to prepare an extra
TRB to pad up to the MPS alignment. Use the same bounce buffer for the
ZLP TRB and the extra pad TRB.

Cc: <stable@vger.kernel.org> # v4.5+
Fixes: d6e5a549cc4d ("usb: dwc3: simplify ZLP handling")
Fixes: 04c03d10e507 ("usb: dwc3: gadget: handle request->zero")
Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: dwc3: gadget: Don't setup more than requested

commit 5d187c0454ef4c5e046a81af36882d4d515922ec upstream.

The SG list may be set up with entry size more than the requested
length. Check the usb_request->length and make sure that we don't setup
the TRBs to send/receive more than requested. This case may occur when
the SG entry is allocated up to a certain minimum size, but the request
length is less than that. It can also occur when the request is reused
for a different request length.

Cc: <stable@vger.kernel.org> # v4.18+
Fixes: a31e63b608ff ("usb: dwc3: gadget: Correct handling of scattergather lists")
Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: gadget: u_f: Unbreak offset calculation in VLAs

commit bfd08d06d978d0304eb6f7855b548aa2cd1c5486 upstream.

Inadvertently the commit b1cd1b65afba ("USB: gadget: u_f: add overflow checks
to VLA macros") makes VLA macros to always return 0 due to different scope of
two variables of the same name. Obviously we need to have only one.

Fixes: b1cd1b65afba ("USB: gadget: u_f: add overflow checks to VLA macros")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Brooke Basile <brookebasile@gmail.com>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20200826192119.56450-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: gadget: f_ncm: add bounds checks to ncm_unwrap_ntb()

commit 2b74b0a04d3e9f9f08ff026e5663dce88ff94e52 upstream.

Some values extracted by ncm_unwrap_ntb() could possibly lead to several
different out of bounds reads of memory.  Specifically the values passed
to netdev_alloc_skb_ip_align() need to be checked so that memory is not
overflowed.

Resolve this by applying bounds checking to a number of different
indexes and lengths of the structure parsing logic.

Reported-by: Ilja Van Sprundel <ivansprundel@ioactive.com>
Signed-off-by: Brooke Basile <brookebasile@gmail.com>
Acked-by: Felipe Balbi <balbi@kernel.org>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: gadget: u_f: add overflow checks to VLA macros

commit b1cd1b65afba95971fa457dfdb2c941c60d38c5b upstream.

size can potentially hold an overflowed value if its assigned expression
is left unchecked, leading to a smaller than needed allocation when
vla_group_size() is used by callers to allocate memory.
To fix this, add a test for saturation before declaring variables and an
overflow check to (n) * sizeof(type).
If the expression results in overflow, vla_group_size() will return SIZE_MAX.

Reported-by: Ilja Van Sprundel <ivansprundel@ioactive.com>
Suggested-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Brooke Basile <brookebasile@gmail.com>
Acked-by: Felipe Balbi <balbi@kernel.org>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: host: ohci-exynos: Fix error handling in exynos_ohci_probe()

commit 1d4169834628d18b2392a2da92b7fbf5e8e2ce89 upstream.

If the function platform_get_irq() failed, the negative value
returned will not be detected here. So fix error handling in
exynos_ohci_probe(). And when get irq failed, the function
platform_get_irq() logs an error message, so remove redundant
message here.

Fixes: 62194244cf87 ("USB: Add Samsung Exynos OHCI diver")
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200826144931.1828-1-tangbin@cmss.chinamobile.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: Ignore UAS for JMicron JMS567 ATA/ATAPI Bridge

commit 9aa37788e7ebb3f489fb4b71ce07adadd444264a upstream.

This device does not support UAS properly and a similar entry already
exists in drivers/usb/storage/unusual_uas.h. Without this patch,
storage_probe() defers the handling of this device to UAS, which cannot
handle it either.

Tested-by: Brice Goglin <brice.goglin@gmail.com>
Fixes: bc3bdb12bbb3 ("usb-storage: Disable UAS on JMicron SATA enclosure")
Acked-by: Alan Stern <stern@rowland.harvard.edu>
CC: <stable@vger.kernel.org>
Signed-off-by: Cyril Roelandt <tipecaml@gmail.com>
Link: https://lore.kernel.org/r/20200825212231.46309-1-tipecaml@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: quirks: Ignore duplicate endpoint on Sound Devices MixPre-D

commit 068834a2773b6a12805105cfadbb3d4229fc6e0a upstream.

The Sound Devices MixPre-D audio card suffers from the same defect
as the Sound Devices USBPre2: an endpoint shared between a normal
audio interface and a vendor-specific interface, in violation of the
USB spec.  Since the USB core now treats duplicated endpoints as bugs
and ignores them, the audio endpoint isn't available and the card
can't be used for audio capture.

Along the same lines as commit bdd1b147b802 ("USB: quirks: blacklist
duplicate ep on Sound Devices USBPre2"), this patch adds a quirks
entry saying to ignore ep5in for interface 1, leaving it available for
use with standard audio interface 2.

Reported-and-tested-by: Jean-Christophe Barnoud <jcbarnoud@gmail.com>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: <stable@vger.kernel.org>
Fixes: 3e4f8e21c4f2 ("USB: core: fix check for duplicate endpoints")
Link: https://lore.kernel.org/r/20200826194624.GA412633@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: quirks: Add no-lpm quirk for another Raydium touchscreen

commit 5967116e8358899ebaa22702d09b0af57fef23e1 upstream.

There's another Raydium touchscreen needs the no-lpm quirk:
[    1.339149] usb 1-9: New USB device found, idVendor=2386, idProduct=350e, bcdDevice= 0.00
[    1.339150] usb 1-9: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.339151] usb 1-9: Product: Raydium Touch System
[    1.339152] usb 1-9: Manufacturer: Raydium Corporation
...
[    6.450497] usb 1-9: can't set config #1, error -110

BugLink: https://bugs.launchpad.net/bugs/1889446
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200731051622.28643-1-kai.heng.feng@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: uas: Add quirk for PNY Pro Elite

commit 9a469bc9f32dd33c7aac5744669d21a023a719cd upstream.

PNY Pro Elite USB 3.1 Gen 2 device (SSD) doesn't respond to ATA_12
pass-through command (i.e. it just hangs). If it doesn't support this
command, it should respond properly to the host. Let's just add a quirk
to be able to move forward with other operations.

Cc: stable@vger.kernel.org
Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
Link: https://lore.kernel.org/r/2b0585228b003eedcc82db84697b31477df152e0.1597803605.git.thinhn@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: yurex: Fix bad gfp argument

commit f176ede3a3bde5b398a6777a7f9ff091baa2d3ff upstream.

The syzbot fuzzer identified a bug in the yurex driver: It passes
GFP_KERNEL as a memory-allocation flag to usb_submit_urb() at a time
when its state is TASK_INTERRUPTIBLE, not TASK_RUNNING:

do not call blocking ops when !TASK_RUNNING; state=1 set at [<00000000370c7c68>] prepare_to_wait+0xb1/0x2a0 kernel/sched/wait.c:247
WARNING: CPU: 1 PID: 340 at kernel/sched/core.c:7253 __might_sleep+0x135/0x190
kernel/sched/core.c:7253
Kernel panic - not syncing: panic_on_warn set ...
CPU: 1 PID: 340 Comm: syz-executor677 Not tainted 5.8.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google
01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0xf6/0x16e lib/dump_stack.c:118
 panic+0x2aa/0x6e1 kernel/panic.c:231
 __warn.cold+0x20/0x50 kernel/panic.c:600
 report_bug+0x1bd/0x210 lib/bug.c:198
 handle_bug+0x41/0x80 arch/x86/kernel/traps.c:234
 exc_invalid_op+0x14/0x40 arch/x86/kernel/traps.c:254
 asm_exc_invalid_op+0x12/0x20 arch/x86/include/asm/idtentry.h:536
RIP: 0010:__might_sleep+0x135/0x190 kernel/sched/core.c:7253
Code: 65 48 8b 1c 25 40 ef 01 00 48 8d 7b 10 48 89 fe 48 c1 ee 03 80 3c 06 00 75
2b 48 8b 73 10 48 c7 c7 e0 9e 06 86 e8 ed 12 f6 ff <0f> 0b e9 46 ff ff ff e8 1f
b2 4b 00 e9 29 ff ff ff e8 15 b2 4b 00
RSP: 0018:ffff8881cdb77a28 EFLAGS: 00010282
RAX: 0000000000000000 RBX: ffff8881c6458000 RCX: 0000000000000000
RDX: ffff8881c6458000 RSI: ffffffff8129ec93 RDI: ffffed1039b6ef37
RBP: ffffffff86fdade2 R08: 0000000000000001 R09: ffff8881db32f54f
R10: 0000000000000000 R11: 0000000030343354 R12: 00000000000001f2
R13: 0000000000000000 R14: 0000000000000068 R15: ffffffff83c1b1aa
 slab_pre_alloc_hook.constprop.0+0xea/0x200 mm/slab.h:498
 slab_alloc_node mm/slub.c:2816 [inline]
 slab_alloc mm/slub.c:2900 [inline]
 kmem_cache_alloc_trace+0x46/0x220 mm/slub.c:2917
 kmalloc include/linux/slab.h:554 [inline]
 dummy_urb_enqueue+0x7a/0x880 drivers/usb/gadget/udc/dummy_hcd.c:1251
 usb_hcd_submit_urb+0x2b2/0x22d0 drivers/usb/core/hcd.c:1547
 usb_submit_urb+0xb4e/0x13e0 drivers/usb/core/urb.c:570
 yurex_write+0x3ea/0x820 drivers/usb/misc/yurex.c:495

This patch changes the call to use GFP_ATOMIC instead of GFP_KERNEL.

Reported-and-tested-by: syzbot+c2c3302f9c601a4b1be2@syzkaller.appspotmail.com
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200810182954.GB307778@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/pm: correct the thermal alert temperature limit settings

commit 28e628645333b7e581c4a7b04d958e4804ea10fe upstream.

Do the maths in celsius degree. This can fix the issues caused
by the changes below:

drm/amd/pm: correct Vega20 swctf limit setting
drm/amd/pm: correct Vega12 swctf limit setting
drm/amd/pm: correct Vega10 swctf limit setting

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/pm: correct Vega20 swctf limit setting

commit 9b51c4b2ba31396f3894ccc7df8bdf067243e9f5 upstream.

Correct the Vega20 thermal swctf limit.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/pm: correct Vega12 swctf limit setting

commit e0ffd340249699ad27a6c91abdfa3e89f7823941 upstream.

Correct the Vega12 thermal swctf limit.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/pm: correct Vega10 swctf limit setting

commit b05d71b51078fc428c6b72582126d9d75d3c1f4c upstream.

Correct the Vega10 thermal swctf limit.

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1267

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/powerplay: Fix hardmins not being sent to SMU for RV

commit e2bf3723db563457c0abe4eaeedac25bbbbd1d76 upstream.

[Why]
DC uses these to raise the voltage as needed for higher dispclk/dppclk
and to ensure that we have enough bandwidth to drive the displays.

There's a bug preventing these from actuially sending messages since
it's checking the actual clock (which is 0) instead of the incoming
clock (which shouldn't be 0) when deciding to send the hardmin.

[How]
Check the clocks != 0 instead of the actual clocks.

Fixes: 9ed9203c3ee7 ("drm/amd/powerplay: rv dal-pplib interface refactor powerplay part")
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu/gfx10: refine mgcg setting

commit de7a1b0b8753e1b0000084f0e339ffab295d27ef upstream.

1. enable ENABLE_CGTS_LEGACY to fix specviewperf11 random hang.
2. remove obsolete RLC_CGTT_SCLK_OVERRIDE workaround.

Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/display: use correct scale for actual_brightness

commit 69d9f4278d0f9d24607645f10e5ac5c59c77a4ac upstream.

Documentation for sysfs backlight level interface requires that
values in both 'brightness' and 'actual_brightness' files are
interpreted to be in range from 0 to the value given in the
'max_brightness' file.

With amdgpu, max_brightness gives 255, and values written by the user
into 'brightness' are internally rescaled to a wider range. However,
reading from 'actual_brightness' gives the raw register value without
inverse rescaling. This causes issues for various userspace tools such
as PowerTop and systemd that expect the value to be in the correct
range.

Introduce a helper to retrieve internal backlight range. Use it to
reimplement 'convert_brightness' as 'convert_brightness_from_user' and
introduce 'convert_brightness_to_user'.

Bug: https://bugzilla.kernel.org/show_bug.cgi?id=203905
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1242
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alexander Monakov <amonakov@ispras.ru>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: Fix buffer overflow in INFO ioctl

commit b5b97cab55eb71daba3283c8b1d2cce456d511a1 upstream.

The values for "se_num" and "sh_num" come from the user in the ioctl.
They can be in the 0-255 range but if they're more than
AMDGPU_GFX_MAX_SE (4) or AMDGPU_GFX_MAX_SH_PER_SE (2) then it results in
an out of bounds read.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/modeset-lock: Take the modeset BKL for legacy drivers

commit 77ef38574beb3e0b414db48e9c0f04633df68ba6 upstream.

This fell off in the conversion in

commit 9bcaa3fe58ab7559e71df798bcff6e0795158695
Author: Michal Orzel <michalorzel.eng@gmail.com>
Date:   Tue Apr 28 19:10:04 2020 +0200

    drm: Replace drm_modeset_lock/unlock_all with DRM_MODESET_LOCK_ALL_* helpers

but it's caught by the drm_warn_on_modeset_not_all_locked() that the
legacy modeset code uses. Since this is the bkl and it's unclear
what's all protected, play it safe and grab it again for legacy
drivers.

Unfortunately this means we need to sprinkle a few more #includes
around.

Also we need to add the drm_device as a parameter to the _END macro.

Finally remove the mute_lock() from setcrtc, since that's now done by
the macro.

Cc: Alex Deucher <alexdeucher@gmail.com>
References: https://gitlab.freedesktop.org/drm/amd/-/issues/1224
Fixes: 9bcaa3fe58ab ("drm: Replace drm_modeset_lock/unlock_all with DRM_MODESET_LOCK_ALL_* helpers")
Cc: Michal Orzel <michalorzel.eng@gmail.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.8+
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200814093842.3048472-1-daniel.vetter@ffwll.ch
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/dp_mst: Don't return error code when crtc is null

commit 88fee1c9007a38c19f2c558dc0ab1ddb4c323dc5 upstream.

[Why]
In certain cases the crtc can be NULL and returning -EINVAL causes
atomic check to fail when it shouln't. This leads to valid
configurations failing because atomic check fails.

[How]
Don't early return if crtc is null

Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
[added stable cc]
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: 8ec046716ca8 ("drm/dp_mst: Add helper to trigger modeset on affected DSC MST CRTCs")
Cc: <stable@vger.kernel.org> # v5.6+
Link: https://patchwork.freedesktop.org/patch/msgid/20200814170140.24917-1-Bhawanpreet.Lakha@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/etnaviv: fix external abort seen on GC600 rev 0x19

commit 2c5bf028ef34745e7b3fe768f9c9355ecc7df101 upstream.

It looks like that this GPU core triggers an abort when
reading VIVS_HI_CHIP_PRODUCT_ID and/or VIVS_HI_CHIP_ECO_ID.

I looked at different versions of Vivante's kernel driver and did
not found anything about this issue or what feature flag can be
used. So go the simplest route and do not read these two registers
on the affected GPU core.

Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reported-by: Josua Mayer <josua.mayer@jm0.eu>
Fixes: 815e45bbd4d3 ("drm/etnaviv: determine product, customer and eco id")
Cc: stable@vger.kernel.org
Tested-by: Josua Mayer <josua.mayer@jm0.eu>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915: Fix cmd parser desc matching with masks

commit e5f10d6385cda083037915c12b130887c8831d2b upstream.

Our variety of defined gpu commands have the actual
command id field and possibly length and flags applied.

We did start to apply the mask during initialization of
the cmd descriptors but forgot to also apply it on comparisons.

Fix comparisons in order to properly deny access with
associated commands.

v2: fix lri with correct mask (Chris)

References: 926abff21a8f ("drm/i915/cmdparser: Ignore Length operands during command matching")
Reported-by: Nicolai Stange <nstange@suse.de>
Cc: stable@vger.kernel.org # v5.4+
Cc: Miroslav Benes <mbenes@suse.cz>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Tyler Hicks <tyhicks@canonical.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Chris Wilson <chris.p.wilson@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200817195926.12671-1-mika.kuoppala@linux.intel.com
(cherry picked from commit 3b4efa148da36f158cce3f662e831af2834b8e0f)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/hotplug: Silence APIC only after all interrupts are migrated

commit 52d6b926aabc47643cd910c85edb262b7f44c168 upstream.

There is a race when taking a CPU offline. Current code looks like this:

native_cpu_disable()
{
...
apic_soft_disable();
/*
 * Any existing set bits for pending interrupt to
 * this CPU are preserved and will be sent via IPI
 * to another CPU by fixup_irqs().
 */
cpu_disable_common();
{
....
/*
 * Race window happens here. Once local APIC has been
 * disabled any new interrupts from the device to
 * the old CPU are lost
 */
fixup_irqs(); // Too late to capture anything in IRR.
...
}
}

The fix is to disable the APIC *after* cpu_disable_common().

Testing was done with a USB NIC that provided a source of frequent
interrupts. A script migrated interrupts to a specific CPU and
then took that CPU offline.

Fixes: 60dcaad5736f ("x86/hotplug: Silence APIC and NMI when CPU is dead")
Reported-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Tested-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Evan Green <evgreen@chromium.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/lkml/875zdarr4h.fsf@nanos.tec.linutronix.de/
Link: https://lore.kernel.org/r/1598501530-45821-1-git-send-email-ashok.raj@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/irq: Unbreak interrupt affinity setting

commit e027fffff799cdd70400c5485b1a54f482255985 upstream.

Several people reported that 5.8 broke the interrupt affinity setting
mechanism.

The consolidation of the entry code reused the regular exception entry code
for device interrupts and changed the way how the vector number is conveyed
from ptregs->orig_ax to a function argument.

The low level entry uses the hardware error code slot to push the vector
number onto the stack which is retrieved from there into a function
argument and the slot on stack is set to -1.

The reason for setting it to -1 is that the error code slot is at the
position where pt_regs::orig_ax is. A positive value in pt_regs::orig_ax
indicates that the entry came via a syscall. If it's not set to a negative
value then a signal delivery on return to userspace would try to restart a
syscall. But there are other places which rely on pt_regs::orig_ax being a
valid indicator for syscall entry.

But setting pt_regs::orig_ax to -1 has a nasty side effect vs. the
interrupt affinity setting mechanism, which was overlooked when this change
was made.

Moving interrupts on x86 happens in several steps. A new vector on a
different CPU is allocated and the relevant interrupt source is
reprogrammed to that. But that's racy and there might be an interrupt
already in flight to the old vector. So the old vector is preserved until
the first interrupt arrives on the new vector and the new target CPU. Once
that happens the old vector is cleaned up, but this cleanup still depends
on the vector number being stored in pt_regs::orig_ax, which is now -1.

That -1 makes the check for cleanup: pt_regs::orig_ax == new_vector
always false. As a consequence the interrupt is moved once, but then it
cannot be moved anymore because the cleanup of the old vector never
happens.

There would be several ways to convey the vector information to that place
in the guts of the interrupt handling, but on deeper inspection it turned
out that this check is pointless and a leftover from the old affinity model
of X86 which supported multi-CPU affinities. Under this model it was
possible that an interrupt had an old and a new vector on the same CPU, so
the vector match was required.

Under the new model the effective affinity of an interrupt is always a
single CPU from the requested affinity mask. If the affinity mask changes
then either the interrupt stays on the CPU and on the same vector when that
CPU is still in the new affinity mask or it is moved to a different CPU, but
it is never moved to a different vector on the same CPU.

Ergo the cleanup check for the matching vector number is not required and
can be removed which makes the dependency on pt_regs:orig_ax go away.

The remaining check for new_cpu == smp_processsor_id() is completely
sufficient. If it matches then the interrupt was successfully migrated and
the cleanup can proceed.

For paranoia sake add a warning into the vector assignment code to
validate that the assumption of never moving to a different vector on
the same CPU holds.

Fixes: 633260fa143 ("x86/irq: Convey vector as argument and not in ptregs")
Reported-by: Alex bykov <alex.bykov@scylladb.com>
Reported-by: Avi Kivity <avi@scylladb.com>
Reported-by: Alexander Graf <graf@amazon.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Alexander Graf <graf@amazon.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/87wo1ltaxz.fsf@nanos.tec.linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

irqchip/stm32-exti: Avoid losing interrupts due to clearing pending bits by mistake

commit e579076ac0a3bebb440fab101aef3c42c9f4c709 upstream.

In the current code, when the eoi callback of the exti clears the pending
bit of the current interrupt, it will first read the values of fpr and
rpr, then logically OR the corresponding bit of the interrupt number,
and finally write back to fpr and rpr.

We found through experiments that if two exti interrupts,
we call them int1/int2, arrive almost at the same time. in our scenario,
the time difference is 30 microseconds, assuming int1 is triggered first.

there will be an extreme scenario: both int's pending bit are set to 1,
the irq handle of int1 is executed first, and eoi handle is then executed,
at this moment, all pending bits are cleared, but the int 2 has not
finally been reported to the cpu yet, which eventually lost int2.

According to stm32's TRM description about rpr and fpr: Writing a 1 to this
bit will trigger a rising edge event on event x, Writing 0 has no
effect.

Therefore, when clearing the pending bit, we only need to clear the
pending bit of the irq.

Fixes: 927abfc4461e7 ("irqchip/stm32: Add stm32mp1 support with hierarchy domain")
Signed-off-by: qiuguorui1 <qiuguorui1@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org # v4.18+
Link: https://lore.kernel.org/r/20200820031629.15582-1-qiuguorui1@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

genirq/matrix: Deal with the sillyness of for_each_cpu() on UP

commit 784a0830377d0761834e385975bc46861fea9fa0 upstream.

Most of the CPU mask operations behave the same way, but for_each_cpu() and
it's variants ignore the cpumask argument and claim that CPU0 is always in
the mask. This is historical, inconsistent and annoying behaviour.

The matrix allocator uses for_each_cpu() and can be called on UP with an
empty cpumask. The calling code does not expect that this succeeds but
until commit e027fffff799 ("x86/irq: Unbreak interrupt affinity setting")
this went unnoticed. That commit added a WARN_ON() to catch cases which
move an interrupt from one vector to another on the same CPU. The warning
triggers on UP.

Add a check for the cpumask being empty to prevent this.

Fixes: 2f75d9e1c905 ("genirq: Implement bitmap matrix allocator")
Reported-by: kernel test robot <rong.a.chen@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usbip: Implement a match function to fix usbip

commit 7a2f2974f26542b4e7b9b4321edb3cbbf3eeb91a upstream.

Commit 88b7381a939d ("USB: Select better matching USB drivers when
available") introduced the use of a "match" function to select a
non-generic/better driver for a particular USB device. This
unfortunately breaks the operation of usbip in general, as reported in
the kernel bugzilla with bug 208267 (linked below).

Upon inspecting the aforementioned commit, one can observe that the
original code in the usb_device_match function used to return 1
unconditionally, but the aforementioned commit makes the usb_device_match
function use identifier tables and "match" virtual functions, if either of
them are available.

Hence, this commit implements a match function for usbip that
unconditionally returns true to ensure that usbip is functional again.

This change has been verified to restore usbip functionality, with a
v5.7.y kernel on an up-to-date version of Qubes OS 4.0, which uses
usbip to redirect USB devices between VMs.

Thanks to Jonathan Dieter for the effort in bisecting this issue down
to the aforementioned commit.

Fixes: 88b7381a939d ("USB: Select better matching USB drivers when available")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=208267
Link: https://bugzilla.redhat.com/show_bug.cgi?id=1856443
Link: https://github.com/QubesOS/qubes-issues/issues/5905
Signed-off-by: M. Vefa Bicakci <m.v.b@runbox.com>
Cc: <stable@vger.kernel.org> # 5.7
Cc: Valentina Manea <valentina.manea.m@gmail.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Reviewed-by: Bastien Nocera <hadess@hadess.net>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20200810160017.46002-1-m.v.b@runbox.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: af_alg - Work around empty control messages without MSG_MORE

commit c195d66a8a75c60515819b101975f38b7ec6577f upstream.

The iwd daemon uses libell which sets up the skcipher operation with
two separate control messages.  As the first control message is sent
without MSG_MORE, it is interpreted as an empty request.

While libell should be fixed to use MSG_MORE where appropriate, this
patch works around the bug in the kernel so that existing binaries
continue to work.

We will print a warning however.

A separate issue is that the new kernel code no longer allows the
control message to be sent twice within the same request.  This
restriction is obviously incompatible with what iwd was doing (first
setting an IV and then sending the real control message).  This
patch changes the kernel so that this is explicitly allowed.

Reported-by: Caleb Jorden <caljorden@hotmail.com>
Fixes: f3c802a1f300 ("crypto: algif_aead - Only wake up when...")
Cc: <stable@vger.kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

device property: Fix the secondary firmware node handling in set_primary_fwnode()

commit c15e1bdda4365a5f17cdadf22bf1c1df13884a9e upstream.

When the primary firmware node pointer is removed from a
device (set to NULL) the secondary firmware node pointer,
when it exists, is made the primary node for the device.
However, the secondary firmware node pointer of the original
primary firmware node is never cleared (set to NULL).

To avoid situation where the secondary firmware node pointer
is pointing to a non-existing object, clearing it properly
when the primary node is removed from a device in
set_primary_fwnode().

Fixes: 97badf873ab6 ("device property: Make it possible to use secondary firmware nodes")
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/perf: Fix crashes with generic_compat_pmu & BHRB

commit b460b512417ae9c8b51a3bdcc09020cd6c60ff69 upstream.

The bhrb_filter_map ("The Branch History Rolling Buffer") callback is
only defined in raw CPUs' power_pmu structs. The "architected" CPUs
use generic_compat_pmu, which does not have this callback, and crashes
occur if a user tries to enable branch stack for an event.

This add a NULL pointer check for bhrb_filter_map() which behaves as
if the callback returned an error.

This does not add the same check for config_bhrb() as the only caller
checks for cpuhw->bhrb_users which remains zero if bhrb_filter_map==0.

Fixes: be80e758d0c2 ("powerpc/perf: Add generic compat mode pmu driver")
Cc: stable@vger.kernel.org # v5.2+
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200602025612.62707-1-aik@ozlabs.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/32s: Disable VMAP stack which CONFIG_ADB_PMU

commit 4a133eb351ccc275683ad49305d0b04dde903733 upstream.

low_sleep_handler() can't restore the context from virtual
stack because the stack can hardly be accessed with MMU OFF.

For now, disable VMAP stack when CONFIG_ADB_PMU is selected.

Fixes: cd08f109e262 ("powerpc/32s: Enable CONFIG_VMAP_STACK")
Cc: stable@vger.kernel.org # v5.6+
Reported-by: Giuseppe Sacco <giuseppe@sguazz.it>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/ec96c15bfa1a7415ab604ee1c98cd45779c08be0.1598553015.git.christophe.leroy@csgroup.eu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PM: sleep: core: Fix the handling of pending runtime resume requests

commit e3eb6e8fba65094328b8dca635d00de74ba75b45 upstream.

It has been reported that system-wide suspend may be aborted in the
absence of any wakeup events due to unforseen interactions of it with
the runtume PM framework.

One failing scenario is when there are multiple devices sharing an
ACPI power resource and runtime-resume needs to be carried out for
one of them during system-wide suspend (for example, because it needs
to be reconfigured before the whole system goes to sleep).  In that
case, the runtime-resume of that device involves turning the ACPI
power resource "on" which in turn causes runtime-resume requests
to be queued up for all of the other devices sharing it.  Those
requests go to the runtime PM workqueue which is frozen during
system-wide suspend, so they are not actually taken care of until
the resume of the whole system, but the pm_runtime_barrier()
call in __device_suspend() sees them and triggers system wakeup
events for them which then cause the system-wide suspend to be
aborted if wakeup source objects are in active use.

Of course, the logic that leads to triggering those wakeup events is
questionable in the first place, because clearly there are cases in
which a pending runtime resume request for a device is not connected
to any real wakeup events in any way (like the one above).  Moreover,
it is racy, because the device may be resuming already by the time
the pm_runtime_barrier() runs and so if the driver doesn't take care
of signaling the wakeup event as appropriate, it will be lost.
However, if the driver does take care of that, the extra
pm_wakeup_event() call in the core is redundant.

Accordingly, drop the conditional pm_wakeup_event() call fron
__device_suspend() and make the latter call pm_runtime_barrier()
alone.  Also modify the comment next to that call to reflect the new
code and extend it to mention the need to avoid unwanted interactions
between runtime PM and system-wide device suspend callbacks.

Fixes: 1e2ef05bb8cf8 ("PM: Limit race conditions between runtime PM and system sleep (v2)")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Utkarsh H Patel <utkarsh.h.patel@intel.com>
Tested-by: Utkarsh H Patel <utkarsh.h.patel@intel.com>
Tested-by: Pengfei Xu <pengfei.xu@intel.com>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: vdso32: make vdso32 install conditional

commit 5d28ba5f8a0cfa3a874fa96c33731b8fcd141b3a upstream.

vdso32 should only be installed if CONFIG_COMPAT_VDSO is enabled,
since it's not even supposed to be compiled otherwise, and arm64
builds without a 32bit crosscompiler will fail.

Fixes: 8d75785a8142 ("ARM64: vdso32: Install vdso32 from vdso_install")
Signed-off-by: Frank van der Linden <fllinden@amazon.com>
Cc: stable@vger.kernel.org [5.4+]
Link: https://lore.kernel.org/r/20200827234012.19757-1-fllinden@amazon.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: arm64: Set HCR_EL2.PTW to prevent AT taking synchronous exception

commit 71a7f8cb1ca4ca7214a700b1243626759b6c11d4 upstream.

AT instructions do a translation table walk and return the result, or
the fault in PAR_EL1. KVM uses these to find the IPA when the value is
not provided by the CPU in HPFAR_EL1.

If a translation table walk causes an external abort it is taken as an
exception, even if it was due to an AT instruction. (DDI0487F.a's D5.2.11
"Synchronous faults generated by address translation instructions")

While we previously made KVM resilient to exceptions taken due to AT
instructions, the device access causes mismatched attributes, and may
occur speculatively. Prevent this, by forbidding a walk through memory
described as device at stage2. Now such AT instructions will report a
stage2 fault.

Such a fault will cause KVM to restart the guest. If the AT instructions
always walk the page tables, but guest execution uses the translation cached
in the TLB, the guest can't make forward progress until the TLB entry is
evicted. This isn't a problem, as since commit 5dcd0fdbb492 ("KVM: arm64:
Defer guest entry when an asynchronous exception is pending"), KVM will
return to the host to process IRQs allowing the rest of the system to keep
running.

Cc: stable@vger.kernel.org # <v5.3: 5dcd0fdbb492 ("KVM: arm64: Defer guest entry when an asynchronous exception is pending")
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

io-wq: fix hang after cancelling pending hashed work

commit 204361a77f4018627addd4a06877448f088ddfc0 upstream.

Don't forget to update wqe->hash_tail after cancelling a pending work
item, if it was hashed.

Cc: stable@vger.kernel.org # 5.7+
Reported-by: Dmitry Shulyak <yashulyak@gmail.com>
Fixes: 86f3cd1b589a1 ("io-wq: handle hashed writes in chains")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xhci: Always restore EP_SOFT_CLEAR_TOGGLE even if ep reset failed

commit f1ec7ae6c9f8c016db320e204cb519a1da1581b8 upstream.

Some device drivers call libusb_clear_halt when target ep queue
is not empty. (eg. spice client connected to qemu for usb redir)

Before commit f5249461b504 ("xhci: Clear the host side toggle
manually when endpoint is soft reset"), that works well.
But now, we got the error log:

    EP not empty, refuse reset

xhci_endpoint_reset failed and left ep_state's EP_SOFT_CLEAR_TOGGLE
bit still set

So all the subsequent urb sumbits to the ep will fail with the
warn log:

    Can't enqueue URB while manually clearing toggle

We need to clear ep_state EP_SOFT_CLEAR_TOGGLE bit after
xhci_endpoint_reset, even if it failed.

Fixes: f5249461b504 ("xhci: Clear the host side toggle manually when endpoint is soft reset")
Cc: stable <stable@vger.kernel.org> # v4.17+
Signed-off-by: Ding Hui <dinghui@sangfor.com.cn>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200821091549.20556-4-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xhci: Do warm-reset when both CAS and XDEV_RESUME are set

commit 904df64a5f4d5ebd670801d869ca0a6d6a6e8df6 upstream.

Sometimes re-plugging a USB device during system sleep renders the device
useless:
[  173.418345] xhci_hcd 0000:00:14.0: Get port status 2-4 read: 0x14203e2, return 0x10262
...
[  176.496485] usb 2-4: Waited 2000ms for CONNECT
[  176.496781] usb usb2-port4: status 0000.0262 after resume, -19
[  176.497103] usb 2-4: can't resume, status -19
[  176.497438] usb usb2-port4: logical disconnect

Because PLS equals to XDEV_RESUME, xHCI driver reports U3 to usbcore,
despite of CAS bit is flagged.

So proritize CAS over XDEV_RESUME to let usbcore handle warm-reset for
the port.

Cc: stable <stable@vger.kernel.org>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200821091549.20556-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: host: xhci: fix ep context print mismatch in debugfs

commit 0077b1b2c8d9ad5f7a08b62fb8524cdb9938388f upstream.

dci is 0 based and xhci_get_ep_ctx() will do ep index increment to get
the ep context.

[rename dci to ep_index -Mathias]
Cc: stable <stable@vger.kernel.org> # v4.15+
Fixes: 02b6fdc2a153 ("usb: xhci: Add debugfs interface for xHCI driver")
Signed-off-by: Li Jun <jun.li@nxp.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200821091549.20556-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: host: xhci-tegra: fix tegra_xusb_get_phy()

commit d54343a87732726b04ac5af873916b5ed4f52932 upstream.

tegra_xusb_get_phy() should take input argument "name".

Signed-off-by: JC Kuo <jckuo@nvidia.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200811092553.657762-1-jckuo@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: host: xhci-tegra: otg usb2/usb3 port init

commit 316a2868bc269be8c6e69ccc3a1f902a3f518eb9 upstream.

tegra_xusb_init_usb_phy() should initialize "otg_usb2_port" and
"otg_usb3_port" with -EINVAL because "0" is a valid value
represents usb2 port 0 or usb3 port 0.

Signed-off-by: JC Kuo <jckuo@nvidia.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200811093143.699541-1-jckuo@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: renesas-xhci: remove version check

commit d66a57be2f9a315fc10d0f524f670fec903e0fb4 upstream.

Some devices in wild are reporting bunch of firmware versions, so remove
the check for versions in driver

Reported by: Anastasios Vacharakis <vacharakis@gmail.com>
Reported by: Glen Journeay <journeay@gmail.com>
Fixes: 2478be82de44 ("usb: renesas-xhci: Add ROM loader for uPD720201")
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=208911
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200818071739.789720-1-vkoul@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

XEN uses irqdesc::irq_data_common::handler_data to store a per interrupt XEN data pointer which contains XEN specific information.

commit c330fb1ddc0a922f044989492b7fcca77ee1db46 upstream.

handler data is meant for interrupt handlers and not for storing irq chip
specific information as some devices require handler data to store internal
per interrupt information, e.g. pinctrl/GPIO chained interrupt handlers.

This obviously creates a conflict of interests and crashes the machine
because the XEN pointer is overwritten by the driver pointer.

As the XEN data is not handler specific it should be stored in
irqdesc::irq_data::chip_data instead.

A simple sed s/irq_[sg]et_handler_data/irq_[sg]et_chip_data/ cures that.

Cc: stable@vger.kernel.org
Reported-by: Roman Shaposhnik <roman@zededa.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Roman Shaposhnik <roman@zededa.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/87lfi2yckt.fsf@nanos.tec.linutronix.de
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

writeback: Fix sync livelock due to b_dirty_time processing

commit f9cae926f35e8230330f28c7b743ad088611a8de upstream.

When we are processing writeback for sync(2), move_expired_inodes()
didn't set any inode expiry value (older_than_this). This can result in
writeback never completing if there's steady stream of inodes added to
b_dirty_time list as writeback rechecks dirty lists after each writeback
round whether there's more work to be done. Fix the problem by using
sync(2) start time is inode expiry value when processing b_dirty_time
list similarly as for ordinarily dirtied inodes. This requires some
refactoring of older_than_this handling which simplifies the code
noticeably as a bonus.

Fixes: 0ae45f63d4ef ("vfs: add support for a lazytime mount option")
CC: stable@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

writeback: Avoid skipping inode writeback

commit 5afced3bf28100d81fb2fe7e98918632a08feaf5 upstream.

Inode's i_io_list list head is used to attach inode to several different
lists - wb->{b_dirty, b_dirty_time, b_io, b_more_io}. When flush worker
prepares a list of inodes to writeback e.g. for sync(2), it moves inodes
to b_io list. Thus it is critical for sync(2) data integrity guarantees
that inode is not requeued to any other writeback list when inode is
queued for processing by flush worker. That's the reason why
writeback_single_inode() does not touch i_io_list (unless the inode is
completely clean) and why __mark_inode_dirty() does not touch i_io_list
if I_SYNC flag is set.

However there are two flaws in the current logic:

1) When inode has only I_DIRTY_TIME set but it is already queued in b_io
list due to sync(2), concurrent __mark_inode_dirty(inode, I_DIRTY_SYNC)
can still move inode back to b_dirty list resulting in skipping
writeback of inode time stamps during sync(2).

2) When inode is on b_dirty_time list and writeback_single_inode() races
with __mark_inode_dirty() like:

writeback_single_inode() __mark_inode_dirty(inode, I_DIRTY_PAGES)
  inode->i_state |= I_SYNC
  __writeback_single_inode()
  inode->i_state |= I_DIRTY_PAGES;
  if (inode->i_state & I_SYNC)
    bail
  if (!(inode->i_state & I_DIRTY_ALL))
  - not true so nothing done

We end up with I_DIRTY_PAGES inode on b_dirty_time list and thus
standard background writeback will not writeback this inode leading to
possible dirty throttling stalls etc. (thanks to Martijn Coenen for this
analysis).

Fix these problems by tracking whether inode is queued in b_io or
b_more_io lists in a new I_SYNC_QUEUED flag. When this flag is set, we
know flush worker has queued inode and we should not touch i_io_list.
On the other hand we also know that once flush worker is done with the
inode it will requeue the inode to appropriate dirty list. When
I_SYNC_QUEUED is not set, __mark_inode_dirty() can (and must) move inode
to appropriate dirty list.

Reported-by: Martijn Coenen <maco@android.com>
Reviewed-by: Martijn Coenen <maco@android.com>
Tested-by: Martijn Coenen <maco@android.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Fixes: 0ae45f63d4ef ("vfs: add support for a lazytime mount option")
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

writeback: Protect inode->i_io_list with inode->i_lock

commit b35250c0816c7cf7d0a8de92f5fafb6a7508a708 upstream.

Currently, operations on inode->i_io_list are protected by
wb->list_lock. In the following patches we'll need to maintain
consistency between inode->i_state and inode->i_io_list so change the
code so that inode->i_lock protects also all inode's i_io_list handling.

Reviewed-by: Martijn Coenen <maco@android.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
CC: stable@vger.kernel.org # Prerequisite for "writeback: Avoid skipping inode writeback"
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>