git.kernel.dk Git - linux-block.git/log

Merge tag 'acpi-6.16-rc2' of git://git./linux/kernel/git/rafael/linux-pm

Pull ACPI fixes from Rafael Wysocki:
"These fix an ACPI APEI error injection driver failure that started to
  occur after switching it over to using a faux device, address an EC
  driver issue related to invalid ECDT tables, clean up the usage of
  mwait_idle_with_hints() in the ACPI PAD driver, add a new IRQ override
  quirk, and fix a NULL pointer dereference related to nosmp:

   - Update the faux device handling code in the driver core and address
     an ACPI APEI error injection driver failure that started to occur
     after switching it over to using a faux device on top of that (Dan
     Williams)

   - Update data types of variables passed as arguments to
     mwait_idle_with_hints() in the ACPI PAD (processor aggregator
     device) driver to match the function definition after recent
     changes (Uros Bizjak)

   - Fix a NULL pointer dereference in the ACPI CPPC library that occurs
     when nosmp is passed to the kernel in the command line (Yunhui Cui)

   - Ignore ECDT tables with an invalid ID string to prevent using an
     incorrect GPE for signaling events on some systems (Armin Wolf)

   - Add a new IRQ override quirk for MACHENIKE 16P (Wentao Guan)"

* tag 'acpi-6.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: resource: Use IRQ override on MACHENIKE 16P
  ACPI: EC: Ignore ECDT tables with an invalid ID string
  ACPI: CPPC: Fix NULL pointer dereference when nosmp is used
  ACPI: PAD: Update arguments of mwait_idle_with_hints()
  ACPI: APEI: EINJ: Do not fail einj_init() on faux_device_create() failure
  driver core: faux: Quiet probe failures
  driver core: faux: Suppress bind attributes

Merge tag 'pm-6.16-rc2' of git://git./linux/kernel/git/rafael/linux-pm

Pull power management fixes from Rafael Wysocki:
"These fix the cpupower utility installation, fix up the recently added
  Rust abstractions for cpufreq and OPP, restore the x86 update
  eliminating mwait_play_dead_cpuid_hint() that has been reverted during
  the 6.16 merge window along with preventing the failure caused by it
  from happening, and clean up mwait_idle_with_hints() usage in
  intel_idle:

   - Implement CpuId Rust abstraction and use it to fix doctest failure
     related to the recently introduced cpumask abstraction (Viresh
     Kumar)

   - Do minor cleanups in the `# Safety` sections for cpufreq
     abstractions added recently (Viresh Kumar)

   - Unbreak cpupower systemd service units installation on some systems
     by adding a unitdir variable for specifying the location to install
     them (Francesco Poli)

   - Eliminate mwait_play_dead_cpuid_hint() again after reverting its
     elimination during the 6.16 merge window due to a problem with
     handling "dead" SMT siblings, but this time prevent leaving them in
     C1 after initialization by taking them online and back offline when
     a proper cpuidle driver for the platform has been registered
     (Rafael Wysocki)

   - Update data types of variables passed as arguments to
     mwait_idle_with_hints() to match the function definition after
     recent changes (Uros Bizjak)"

* tag 'pm-6.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  rust: cpu: Add CpuId::current() to retrieve current CPU ID
  rust: Use CpuId in place of raw CPU numbers
  rust: cpu: Introduce CpuId abstraction
  intel_idle: Update arguments of mwait_idle_with_hints()
  cpufreq: Convert `/// SAFETY` lines to `# Safety` sections
  cpupower: split unitdir from libdir in Makefile
  Reapply "x86/smp: Eliminate mwait_play_dead_cpuid_hint()"
  ACPI: processor: Rescan "dead" SMT siblings during initialization
  intel_idle: Rescan "dead" SMT siblings during initialization
  x86/smp: PM/hibernate: Split arch_resume_nosmt()
  intel_idle: Use subsys_initcall_sync() for initialization

Merge branches 'acpi-pad', 'acpi-cppc', 'acpi-ec' and 'acpi-resource'

Merge assorted ACPI updates for 6.16-rc2:

- Update data types of variables passed as arguments to
   mwait_idle_with_hints() in the ACPI PAD (processor aggregator device)
   driver to match the function definition after recent changes (Uros
   Bizjak).

- Fix a NULL pointer dereference in the ACPI CPPC library that occurs
   when nosmp is passed to the kernel in the command line (Yunhui Cui).

- Ignore ECDT tables with an invalid ID string to prevent using an
   incorrect GPE for signaling events on some systems (Armin Wolf).

- Add a new IRQ override quirk for MACHENIKE 16P (Wentao Guan).

* acpi-pad:
  ACPI: PAD: Update arguments of mwait_idle_with_hints()

* acpi-cppc:
  ACPI: CPPC: Fix NULL pointer dereference when nosmp is used

* acpi-ec:
  ACPI: EC: Ignore ECDT tables with an invalid ID string

* acpi-resource:
  ACPI: resource: Use IRQ override on MACHENIKE 16P

Merge branch 'pm-cpuidle'

Merge cpuidle updates for 6.16-rc2:

- Update data types of variables passed as arguments to
   mwait_idle_with_hints() to match the function definition
   after recent changes (Uros Bizjak).

- Eliminate mwait_play_dead_cpuid_hint() again after reverting its
   elimination during the merge window due to a problem with handling
   "dead" SMT siblings, but this time prevent leaving them in C1 after
   initialization by taking them online and back offline when a proper
   cpuidle driver for the platform has been registered (Rafael Wysocki).

* pm-cpuidle:
  intel_idle: Update arguments of mwait_idle_with_hints()
  Reapply "x86/smp: Eliminate mwait_play_dead_cpuid_hint()"
  ACPI: processor: Rescan "dead" SMT siblings during initialization
  intel_idle: Rescan "dead" SMT siblings during initialization
  x86/smp: PM/hibernate: Split arch_resume_nosmt()
  intel_idle: Use subsys_initcall_sync() for initialization

Merge branch 'pm-tools'

Merge a cpupower utility fix for 6.16-rc2 that unbreaks systemd service
units installation on some sysems (Francesco Poli).

* pm-tools:
cpupower: split unitdir from libdir in Makefile

Merge tag 'spi-fix-v6.16-rc1' of git://git./linux/kernel/git/broonie/spi

Pull spi fixes from Mark Brown:
"A collection of driver specific fixes, most minor apart from the OMAP
  ones which disable some recent performance optimisations in some
  non-standard cases where we could start driving the bus incorrectly.

  The change to the stm32-ospi driver to use the newer reset APIs is a
  fix for interactions with other IP sharing the same reset line in some
  SoCs"

* tag 'spi-fix-v6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: spi-pci1xxxx: Drop MSI-X usage as unsupported by DMA engine
  spi: stm32-ospi: clean up on error in probe()
  spi: stm32-ospi: Make usage of reset_control_acquire/release() API
  spi: offload: check offload ops existence before disabling the trigger
  spi: spi-pci1xxxx: Fix error code in probe
  spi: loongson: Fix build warnings about export.h
  spi: omap2-mcspi: Disable multi-mode when the previous message kept CS asserted
  spi: omap2-mcspi: Disable multi mode when CS should be kept asserted after message

Merge tag 'regulator-fix-v6.16-rc1' of git://git./linux/kernel/git/broonie/regulator

Pull regulator fix from Mark Brown:
"One minor fix for a leak in the DT parsing code in the max20086 driver"

* tag 'regulator-fix-v6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: max20086: Fix refcount leak in max20086_parse_regulators_dt()

posix-cpu-timers: fix race between handle_posix_cpu_timers() and posix_cpu_timer_del()

If an exiting non-autoreaping task has already passed exit_notify() and
calls handle_posix_cpu_timers() from IRQ, it can be reaped by its parent
or debugger right after unlock_task_sighand().

If a concurrent posix_cpu_timer_del() runs at that moment, it won't be
able to detect timer->it.cpu.firing != 0: cpu_timer_task_rcu() and/or
lock_task_sighand() will fail.

Add the tsk->exit_state check into run_posix_cpu_timers() to fix this.

This fix is not needed if CONFIG_POSIX_CPU_TIMERS_TASK_WORK=y, because
exit_task_work() is called before exit_notify(). But the check still
makes sense, task_work_add(&tsk->posix_cputimers_work.work) will fail
anyway in this case.

Cc: stable@vger.kernel.org
Reported-by: Benoît Sevens <bsevens@google.com>
Fixes: 0bdd2ed4138e ("sched: run_posix_cpu_timers: Don't check ->exit_state, use lock_task_sighand()")
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'trace-v6.16-rc1' of git://git./linux/kernel/git/trace/linux-trace

Pull tracing fix from Steven Rostedt:

- Do not free "head" variable in filter_free_subsystem_filters()

   The first error path jumps to "free_now" label but first frees the
   newly allocated "head" variable. But the "free_now" code checks this
   variable, and if it is not NULL, it will iterate the list. As this
   list variable was already initialized, the "free_now" code will not
   do anything as it is empty. But freeing it will cause a UAF bug.

   The error path should simply jump to the "free_now" label and leave
   the "head" variable alone.

* tag 'trace-v6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  tracing: Do not free "head" on error path of filter_free_subsystem_filters()

Merge tag 'for-linus' of git://git./virt/kvm/kvm

Pull kvm fixes from Paolo Bonzini:
"ARM:

   - Rework of system register accessors for system registers that are
     directly writen to memory, so that sanitisation of the in-memory
     value happens at the correct time (after the read, or before the
     write). For convenience, RMW-style accessors are also provided.

   - Multiple fixes for the so-called "arch-timer-edge-cases' selftest,
     which was always broken.

  x86:

   - Make KVM_PRE_FAULT_MEMORY stricter for TDX, allowing userspace to
     pass only the "untouched" addresses and flipping the shared/private
     bit in the implementation.

   - Disable SEV-SNP support on initialization failure

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: x86/mmu: Reject direct bits in gpa passed to KVM_PRE_FAULT_MEMORY
  KVM: x86/mmu: Embed direct bits into gpa for KVM_PRE_FAULT_MEMORY
  KVM: SEV: Disable SEV-SNP support on initialization failure
  KVM: arm64: selftests: Determine effective counter width in arch_timer_edge_cases
  KVM: arm64: selftests: Fix xVAL init in arch_timer_edge_cases
  KVM: arm64: selftests: Fix thread migration in arch_timer_edge_cases
  KVM: arm64: selftests: Fix help text for arch_timer_edge_cases
  KVM: arm64: Make __vcpu_sys_reg() a pure rvalue operand
  KVM: arm64: Don't use __vcpu_sys_reg() to get the address of a sysreg
  KVM: arm64: Add RMW specific sysreg accessor
  KVM: arm64: Add assignment-specific sysreg accessor

Merge tag 'v6.16-p4' of git://git./linux/kernel/git/herbert/crypto-2.6

Pull crypto fix from Herbert Xu:
"Fix a broken self-test in hkdf (new regression)"

* tag 'v6.16-p4' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: hkdf - move to late_initcall

Merge tag 'bcachefs-2025-06-12' of git://evilpiepirate.org/bcachefs

Pull bcachefs fixes from Kent Overstreet:
"As usual, highlighting the ones users have been noticing:

   - Fix a small issue with has_case_insensitive not being propagated on
     snapshot creation; this led to fsck errors, which we're harmless
     because we're not using this flag yet (it's for overlayfs +
     casefolding).

   - Log the error being corrected in the journal when we're doing fsck
     repair: this was one of the "lessons learned" from the i_nlink 0 ->
     subvolume deletion bug, where reconstructing what had happened by
     analyzing the journal was a bit more difficult than it needed to
     be.

   - Don't schedule btree node scan to run in the superblock: this fixes
     a regression from the 6.16 recovery passes rework, and let to it
     running unnecessarily.

     The real issue here is that we don't have online, "self healing"
     style topology repair yet: topology repair currently has to run
     before we go RW, which means that we may schedule it unnecessarily
     after a transient error. This will be fixed in the future.

   - We now track, in btree node flags, the reason it was scheduled to
     be rewritten. We discovered a deadlock in recovery when many btree
     nodes need to be rewritten because they're degraded: fully fixing
     this will take some work but it's now easier to see what's going
     on.

     For the bug report where this came up, a device had been kicked RO
     due to transient errors: manually setting it back to RW was
     sufficient to allow recovery to succeed.

   - Mark a few more fsck errors as autofix: as a reminder to users,
     please do keep reporting cases where something needs to be repaired
     and is not repaired automatically (i.e. cases where -o fix_errors
     or fsck -y is required).

   - rcu_pending.c now works with PREEMPT_RT

   - 'bcachefs device add', then umount, then remount wasn't working -
     we now emit a uevent so that the new device's new superblock is
     correctly picked up

   - Assorted repair fixes: btree node scan will no longer incorrectly
     update sb->version_min,

   - Assorted syzbot fixes"

* tag 'bcachefs-2025-06-12' of git://evilpiepirate.org/bcachefs: (23 commits)
  bcachefs: Don't trace should_be_locked unless changing
  bcachefs: Ensure that snapshot creation propagates has_case_insensitive
  bcachefs: Print devices we're mounting on multi device filesystems
  bcachefs: Don't trust sb->nr_devices in members_to_text()
  bcachefs: Fix version checks in validate_bset()
  bcachefs: ioctl: avoid stack overflow warning
  bcachefs: Don't pass trans to fsck_err() in gc_accounting_done
  bcachefs: Fix leak in bch2_fs_recovery() error path
  bcachefs: Fix rcu_pending for PREEMPT_RT
  bcachefs: Fix downgrade_table_extra()
  bcachefs: Don't put rhashtable on stack
  bcachefs: Make sure opts.read_only gets propagated back to VFS
  bcachefs: Fix possible console lock involved deadlock
  bcachefs: mark more errors autofix
  bcachefs: Don't persistently run scan_for_btree_nodes
  bcachefs: Read error message now prints if self healing
  bcachefs: Only run 'increase_depth' for keys from btree node csan
  bcachefs: Mark need_discard_freespace_key_bad autofix
  bcachefs: Update /dev/disk/by-uuid on device add
  bcachefs: Add more flags to btree nodes for rewrite reason
  ...

spi: spi-pci1xxxx: Drop MSI-X usage as unsupported by DMA engine

Removes MSI-X from the interrupt request path, as the DMA engine used by
the SPI controller does not support MSI-X interrupts.

Signed-off-by: Thangaraj Samynathan <thangaraj.s@microchip.com>
Link: https://patch.msgid.link/20250612023059.71726-1-thangaraj.s@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>

Merge tag 'bitmap-for-6.16-rc2' of https://github.com/norov/linux

Pull bitmap fix from Yury Norov:
"Fix for __GENMASK() and __GENMASK_ULL() in UAPI"

* tag 'bitmap-for-6.16-rc2' of https://github.com/norov/linux:
uapi: bitops: use UAPI-safe variant of BITS_PER_LONG again

Merge tag 'net-6.16-rc2' of git://git./linux/kernel/git/netdev/net

Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth and wireless.

  Current release - regressions:

   - af_unix: allow passing cred for embryo without SO_PASSCRED/SO_PASSPIDFD

  Current release - new code bugs:

   - eth: airoha: correct enable mask for RX queues 16-31

   - veth: prevent NULL pointer dereference in veth_xdp_rcv when peer
     disappears under traffic

   - ipv6: move fib6_config_validate() to ip6_route_add(), prevent
     invalid routes

  Previous releases - regressions:

   - phy: phy_caps: don't skip better duplex match on non-exact match

   - dsa: b53: fix untagged traffic sent via cpu tagged with VID 0

   - Revert "wifi: mwifiex: Fix HT40 bandwidth issue.", it caused
     transient packet loss, exact reason not fully understood, yet

  Previous releases - always broken:

   - net: clear the dst when BPF is changing skb protocol (IPv4 <> IPv6)

   - sched: sfq: fix a potential crash on gso_skb handling

   - Bluetooth: intel: improve rx buffer posting to avoid causing issues
     in the firmware

   - eth: intel: i40e: make reset handling robust against multiple
     requests

   - eth: mlx5: ensure FW pages are always allocated on the local NUMA
     node, even when device is configure to 'serve' another node

   - wifi: ath12k: fix GCC_GCC_PCIE_HOT_RST definition for WCN7850,
     prevent kernel crashes

   - wifi: ath11k: avoid burning CPU in ath11k_debugfs_fw_stats_request()
     for 3 sec if fw_stats_done is not set"

* tag 'net-6.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (70 commits)
  selftests: drv-net: rss_ctx: Add test for ntuple rules targeting default RSS context
  net: ethtool: Don't check if RSS context exists in case of context 0
  af_unix: Allow passing cred for embryo without SO_PASSCRED/SO_PASSPIDFD.
  ipv6: Move fib6_config_validate() to ip6_route_add().
  net: drv: netdevsim: don't napi_complete() from netpoll
  net/mlx5: HWS, Add error checking to hws_bwc_rule_complex_hash_node_get()
  veth: prevent NULL pointer dereference in veth_xdp_rcv
  net_sched: remove qdisc_tree_flush_backlog()
  net_sched: ets: fix a race in ets_qdisc_change()
  net_sched: tbf: fix a race in tbf_change()
  net_sched: red: fix a race in __red_change()
  net_sched: prio: fix a race in prio_tune()
  net_sched: sch_sfq: reject invalid perturb period
  net: phy: phy_caps: Don't skip better duplex macth on non-exact match
  MAINTAINERS: Update Kuniyuki Iwashima's email address.
  selftests: net: add test case for NAT46 looping back dst
  net: clear the dst when changing skb protocol
  net/mlx5e: Fix number of lanes to UNKNOWN when using data_rate_oper
  net/mlx5e: Fix leak of Geneve TLV option object
  net/mlx5: HWS, make sure the uplink is the last destination
  ...

Merge tag 'pinctrl-v6.16-2' of git://git./linux/kernel/git/linusw/linux-pinctrl

Pull pin control fixes from Linus Walleij:

- Add some missing pins on the Qualcomm QCM2290, along with a managed
   resources patch that make it clean and nice

- Drop an unused function in the ST Micro driver

- Drop bouncing MAINTAINER entry

- Drop of_match_ptr() macro to rid compile warnings in the TB10x
   driver

- Fix up calculation of pin numbers from base in the Sunxi driver

* tag 'pinctrl-v6.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: sunxi: dt: Consider pin base when calculating bank number from pin
  pinctrl: tb10x: Drop of_match_ptr for ID table
  pinctrl: MAINTAINERS: Drop bouncing Jianlong Huang
  pinctrl: st: Drop unused st_gpio_bank() function
  pinctrl: qcom: pinctrl-qcm2290: Add missing pins
  pinctrl: qcom: switch to devm_gpiochip_add_data()

Merge tag 'arc-6.16-rc1' of git://git./linux/kernel/git/vgupta/arc

Pull ARC fixes from Vineet Gupta:

- arch_atomic64_cmpxchg relaxed variant [Jason]

- use of inbuilt swap in stack unwinder  [Yu-Chun Lin]

- use of __ASSEMBLER__ in kernel headers [Thomas Huth]

* tag 'arc-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARC: Replace __ASSEMBLY__ with __ASSEMBLER__ in the non-uapi headers
  ARC: Replace __ASSEMBLY__ with __ASSEMBLER__ in uapi headers
  ARC: unwind: Use built-in sort swap to reduce code size and improve performance
  ARC: atomics: Implement arch_atomic64_cmpxchg using _relaxed

Merge tag 'wireless-2025-06-12' of https://git./linux/kernel/git/wireless/wireless

Johannes Berg says:

====================
Another quick round of updates:

- revert mwifiex HT40 that was causing issues
- many ath10k/ath11k/ath12k fixes
- re-add some iwlwifi code I lost in a merge
- use kfree_sensitive() on an error path in cfg80211

* tag 'wireless-2025-06-12' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
  wifi: cfg80211: use kfree_sensitive() for connkeys cleanup
  wifi: iwlwifi: fix merge damage related to iwl_pci_resume
  Revert "wifi: mwifiex: Fix HT40 bandwidth issue."
  wifi: ath12k: fix uaf in ath12k_core_init()
  wifi: ath12k: Fix hal_reo_cmd_status kernel-doc
  wifi: ath12k: fix GCC_GCC_PCIE_HOT_RST definition for WCN7850
  wifi: ath11k: validate ath11k_crypto_mode on top of ath11k_core_qmi_firmware_ready
  wifi: ath11k: consistently use ath11k_mac_get_fw_stats()
  wifi: ath11k: move locking outside of ath11k_mac_get_fw_stats()
  wifi: ath11k: adjust unlock sequence in ath11k_update_stats_event()
  wifi: ath11k: move some firmware stats related functions outside of debugfs
  wifi: ath11k: don't wait when there is no vdev started
  wifi: ath11k: don't use static variables in ath11k_debugfs_fw_stats_process()
  wifi: ath11k: avoid burning CPU in ath11k_debugfs_fw_stats_request()
  wil6210: fix support for sparrow chipsets
  wifi: ath10k: Avoid vdev delete timeout when firmware is already down
  ath10k: snoc: fix unbalanced IRQ enable in crash recovery
====================

Link: https://patch.msgid.link/20250612082519.11447-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'fix-ntuple-rules-targeting-default-rss'

Gal Pressman says:

====================
Fix ntuple rules targeting default RSS

This series addresses a regression in ethtool flow steering where rules
targeting the default RSS context (context 0) were incorrectly rejected.

The default RSS context always exists but is not stored in the rss_ctx
xarray like additional contexts. The current validation logic was
checking for the existence of context 0 in this array, causing valid
flow steering rules to be rejected.

This prevented configurations such as:
- High priority rules directing specific traffic to the default context
- Low priority catch-all rules directing remaining traffic to additional
contexts

Patch 1 fixes the validation logic to skip the existence check for
context 0.

Patch 2 adds a selftest that verifies this behavior.

v3: https://lore.kernel.org/20250609120250.1630125-1-gal@nvidia.com
v2: https://lore.kernel.org/20250225071348.509432-1-gal@nvidia.com
====================

Link: https://patch.msgid.link/20250612071958.1696361-1-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: drv-net: rss_ctx: Add test for ntuple rules targeting default RSS context

Add test_rss_default_context_rule() to verify that ntuple rules can
correctly direct traffic to the default RSS context (context 0).

The test creates two ntuple rules with explicit location priorities:
- A high-priority rule (loc 0) directing specific port traffic to
  context 0.
- A low-priority rule (loc 1) directing all other TCP traffic to context
  1.

This validates that:
1. Rules targeting the default context function properly.
2. Traffic steering works as expected when mixing default and
   additional RSS contexts.

The test was written by AI, and reviewed by humans.

Reviewed-by: Nimrod Oren <noren@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20250612071958.1696361-3-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: ethtool: Don't check if RSS context exists in case of context 0

Context 0 (default context) always exists, there is no need to check
whether it exists or not when adding a flow steering rule.

The existing check fails when creating a flow steering rule for context
0 as it is not stored in the rss_ctx xarray.

For example:
$ ethtool --config-ntuple eth2 flow-type tcp4 dst-ip 194.237.147.23 dst-port 19983 context 0 loc 618
rmgr: Cannot insert RX class rule: Invalid argument
Cannot insert classification rule

An example usecase for this could be:
- A high-priority rule (loc 0) directing specific port traffic to
context 0.
- A low-priority rule (loc 1) directing all other TCP traffic to context
1.

This is a user-visible regression that was caught in our testing
environment, it was not reported by a user yet.

Fixes: de7f7582dff2 ("net: ethtool: prevent flow steering to RSS contexts which don't exist")
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://patch.msgid.link/20250612071958.1696361-2-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'for-net-2025-06-11' of git://git./linux/kernel/git/bluetooth/bluetooth

Luiz Augusto von Dentz says:

====================
bluetooth pull request for net:

- eir: Fix NULL pointer deference on eir_get_service_data
- eir: Fix possible crashes on eir_create_adv_data
- hci_sync: Fix broadcast/PA when using an existing instance
- ISO: Fix using BT_SK_PA_SYNC to detect BIS sockets
- ISO: Fix not using bc_sid as advertisement SID
- MGMT: Fix sparse errors

* tag 'for-net-2025-06-11' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
  Bluetooth: MGMT: Fix sparse errors
  Bluetooth: ISO: Fix not using bc_sid as advertisement SID
  Bluetooth: ISO: Fix using BT_SK_PA_SYNC to detect BIS sockets
  Bluetooth: eir: Fix possible crashes on eir_create_adv_data
  Bluetooth: hci_sync: Fix broadcast/PA when using an existing instance
  Bluetooth: Fix NULL pointer deference on eir_get_service_data
====================

Link: https://patch.msgid.link/20250611204944.1559356-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

af_unix: Allow passing cred for embryo without SO_PASSCRED/SO_PASSPIDFD.

Before the cited commit, the kernel unconditionally embedded SCM
credentials to skb for embryo sockets even when both the sender
and listener disabled SO_PASSCRED and SO_PASSPIDFD.

Now, the credentials are added to skb only when configured by the
sender or the listener.

However, as reported in the link below, it caused a regression for
some programs that assume credentials are included in every skb,
but sometimes not now.

The only problematic scenario would be that a socket starts listening
before setting the option.  Then, there will be 2 types of non-small
race window, where a client can send skb without credentials, which
the peer receives as an "invalid" message (and aborts the connection
it seems ?):

  Client                    Server
  ------                    ------
                            s1.listen()  <-- No SO_PASS{CRED,PIDFD}
  s2.connect()
  s2.send()  <-- w/o cred
                            s1.setsockopt(SO_PASS{CRED,PIDFD})
  s2.send()  <-- w/  cred

or

  Client                    Server
  ------                    ------
                            s1.listen()  <-- No SO_PASS{CRED,PIDFD}
  s2.connect()
  s2.send()  <-- w/o cred
                            s3, _ = s1.accept()  <-- Inherit cred options
  s2.send()  <-- w/o cred                            but not set yet

                            s3.setsockopt(SO_PASS{CRED,PIDFD})
  s2.send()  <-- w/  cred

It's unfortunate that buggy programs depend on the behaviour,
but let's restore the previous behaviour.

Fixes: 3f84d577b79d ("af_unix: Inherit sk_flags at connect().")
Reported-by: Jacek Łuczak <difrost.kernel@gmail.com>
Closes: https://lore.kernel.org/all/68d38b0b-1666-4974-85d4-15575789c8d4@gmail.com/
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Tested-by: Christian Heusel <christian@heusel.eu>
Tested-by: André Almeida <andrealmeid@igalia.com>
Tested-by: Jacek Łuczak <difrost.kernel@gmail.com>
Link: https://patch.msgid.link/20250611202758.3075858-1-kuni1840@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ipv6: Move fib6_config_validate() to ip6_route_add().

syzkaller created an IPv6 route from a malformed packet, which has
a prefix len > 128, triggering the splat below. [0]

This is a similar issue fixed by commit 586ceac9acb7 ("ipv6: Restore
fib6_config validation for SIOCADDRT.").

The cited commit removed fib6_config validation from some callers
of ip6_add_route().

Let's move the validation back to ip6_route_add() and
ip6_route_multipath_add().

[0]:
UBSAN: array-index-out-of-bounds in ./include/net/ipv6.h:616:34
index 20 is out of range for type '__u8 [16]'
CPU: 1 UID: 0 PID: 7444 Comm: syz.0.708 Not tainted 6.16.0-rc1-syzkaller-g19272b37aa4f #0 PREEMPT
Hardware name: riscv-virtio,qemu (DT)
Call Trace:
[<ffffffff80078a80>] dump_backtrace+0x2e/0x3c arch/riscv/kernel/stacktrace.c:132
[<ffffffff8000327a>] show_stack+0x30/0x3c arch/riscv/kernel/stacktrace.c:138
[<ffffffff80061012>] __dump_stack lib/dump_stack.c:94 [inline]
[<ffffffff80061012>] dump_stack_lvl+0x12e/0x1a6 lib/dump_stack.c:120
[<ffffffff800610a6>] dump_stack+0x1c/0x24 lib/dump_stack.c:129
[<ffffffff8001c0ea>] ubsan_epilogue+0x14/0x46 lib/ubsan.c:233
[<ffffffff819ba290>] __ubsan_handle_out_of_bounds+0xf6/0xf8 lib/ubsan.c:455
[<ffffffff85b363a4>] ipv6_addr_prefix include/net/ipv6.h:616 [inline]
[<ffffffff85b363a4>] ip6_route_info_create+0x8f8/0x96e net/ipv6/route.c:3793
[<ffffffff85b635da>] ip6_route_add+0x2a/0x1aa net/ipv6/route.c:3889
[<ffffffff85b02e08>] addrconf_prefix_route+0x2c4/0x4e8 net/ipv6/addrconf.c:2487
[<ffffffff85b23bb2>] addrconf_prefix_rcv+0x1720/0x1e62 net/ipv6/addrconf.c:2878
[<ffffffff85b92664>] ndisc_router_discovery+0x1a06/0x3504 net/ipv6/ndisc.c:1570
[<ffffffff85b99038>] ndisc_rcv+0x500/0x600 net/ipv6/ndisc.c:1874
[<ffffffff85bc2c18>] icmpv6_rcv+0x145e/0x1e0a net/ipv6/icmp.c:988
[<ffffffff85af6798>] ip6_protocol_deliver_rcu+0x18a/0x1976 net/ipv6/ip6_input.c:436
[<ffffffff85af8078>] ip6_input_finish+0xf4/0x174 net/ipv6/ip6_input.c:480
[<ffffffff85af8262>] NF_HOOK include/linux/netfilter.h:317 [inline]
[<ffffffff85af8262>] NF_HOOK include/linux/netfilter.h:311 [inline]
[<ffffffff85af8262>] ip6_input+0x16a/0x70c net/ipv6/ip6_input.c:491
[<ffffffff85af8dcc>] ip6_mc_input+0x5c8/0x1268 net/ipv6/ip6_input.c:588
[<ffffffff85af6112>] dst_input include/net/dst.h:469 [inline]
[<ffffffff85af6112>] ip6_rcv_finish net/ipv6/ip6_input.c:79 [inline]
[<ffffffff85af6112>] NF_HOOK include/linux/netfilter.h:317 [inline]
[<ffffffff85af6112>] NF_HOOK include/linux/netfilter.h:311 [inline]
[<ffffffff85af6112>] ipv6_rcv+0x5ae/0x6e0 net/ipv6/ip6_input.c:309
[<ffffffff85087e84>] __netif_receive_skb_one_core+0x106/0x16e net/core/dev.c:5977
[<ffffffff85088104>] __netif_receive_skb+0x2c/0x144 net/core/dev.c:6090
[<ffffffff850883c6>] netif_receive_skb_internal net/core/dev.c:6176 [inline]
[<ffffffff850883c6>] netif_receive_skb+0x1aa/0xbf2 net/core/dev.c:6235
[<ffffffff8328656e>] tun_rx_batched.isra.0+0x430/0x686 drivers/net/tun.c:1485
[<ffffffff8329ed3a>] tun_get_user+0x2952/0x3d6c drivers/net/tun.c:1938
[<ffffffff832a21e0>] tun_chr_write_iter+0xc4/0x21c drivers/net/tun.c:1984
[<ffffffff80b9b9ae>] new_sync_write fs/read_write.c:593 [inline]
[<ffffffff80b9b9ae>] vfs_write+0x56c/0xa9a fs/read_write.c:686
[<ffffffff80b9c2be>] ksys_write+0x126/0x228 fs/read_write.c:738
[<ffffffff80b9c42e>] __do_sys_write fs/read_write.c:749 [inline]
[<ffffffff80b9c42e>] __se_sys_write fs/read_write.c:746 [inline]
[<ffffffff80b9c42e>] __riscv_sys_write+0x6e/0x94 fs/read_write.c:746
[<ffffffff80076912>] syscall_handler+0x94/0x118 arch/riscv/include/asm/syscall.h:112
[<ffffffff8637e31e>] do_trap_ecall_u+0x396/0x530 arch/riscv/kernel/traps.c:341
[<ffffffff863a69e2>] handle_exception+0x146/0x152 arch/riscv/kernel/entry.S:197

Fixes: fa76c1674f2e ("ipv6: Move some validation from ip6_route_info_create() to rtm_to_fib6_config().")
Reported-by: syzbot+4c2358694722d304c44e@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/6849b8c3.a00a0220.1eb5f5.00f0.GAE@google.com/
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250611193551.2999991-1-kuni1840@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: drv: netdevsim: don't napi_complete() from netpoll

netdevsim supports netpoll. Make sure we don't call napi_complete()
from it, since it may not be scheduled. Breno reports hitting a
warning in napi_complete_done():

WARNING: CPU: 14 PID: 104 at net/core/dev.c:6592 napi_complete_done+0x2cc/0x560
__napi_poll+0x2d8/0x3a0
handle_softirqs+0x1fe/0x710

This is presumably after netpoll stole the SCHED bit prematurely.

Reported-by: Breno Leitao <leitao@debian.org>
Fixes: 3762ec05a9fb ("netdevsim: add NAPI support")
Tested-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250611174643.2769263-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/mlx5: HWS, Add error checking to hws_bwc_rule_complex_hash_node_get()

Check for if ida_alloc() or rhashtable_lookup_get_insert_fast() fails.

Fixes: 17e0accac577 ("net/mlx5: HWS, support complex matchers")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Link: https://patch.msgid.link/aEmBONjyiF6z5yCV@stanley.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

veth: prevent NULL pointer dereference in veth_xdp_rcv

The veth peer device is RCU protected, but when the peer device gets
deleted (veth_dellink) then the pointer is assigned NULL (via
RCU_INIT_POINTER).

This patch adds a necessary NULL check in veth_xdp_rcv when accessing
the veth peer net_device.

This fixes a bug introduced in commit dc82a33297fc ("veth: apply qdisc
backpressure on full ptr_ring to reduce TX drops"). The bug is a race
and only triggers when having inflight packets on a veth that is being
deleted.

Reported-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Closes: https://lore.kernel.org/all/fecfcad0-7a16-42b8-bff2-66ee83a6e5c4@linux.dev/
Reported-by: syzbot+c4c7bf27f6b0c4bd97fe@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/683da55e.a00a0220.d8eae.0052.GAE@google.com/
Fixes: dc82a33297fc ("veth: apply qdisc backpressure on full ptr_ring to reduce TX drops")
Signed-off-by: Jesper Dangaard Brouer <hawk@kernel.org>
Acked-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Link: https://patch.msgid.link/174964557873.519608.10855046105237280978.stgit@firesoul
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'net_sched-no-longer-use-qdisc_tree_flush_backlog'

Eric Dumazet says:

====================
net_sched: no longer use qdisc_tree_flush_backlog()

This series is based on a report from Gerrard Tai.

Essentially, all users of qdisc_tree_flush_backlog() are racy.

We must instead use qdisc_purge_queue().
====================

Link: https://patch.msgid.link/20250611111515.1983366-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net_sched: remove qdisc_tree_flush_backlog()

This function is no longer used after the four prior fixes.

Given all prior uses were wrong, it seems better to remove it.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250611111515.1983366-6-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net_sched: ets: fix a race in ets_qdisc_change()

Gerrard Tai reported a race condition in ETS, whenever SFQ perturb timer
fires at the wrong time.

The race is as follows:

CPU 0                                 CPU 1
[1]: lock root
[2]: qdisc_tree_flush_backlog()
[3]: unlock root
|
|                                    [5]: lock root
|                                    [6]: rehash
|                                    [7]: qdisc_tree_reduce_backlog()
|
[4]: qdisc_put()

This can be abused to underflow a parent's qlen.

Calling qdisc_purge_queue() instead of qdisc_tree_flush_backlog()
should fix the race, because all packets will be purged from the qdisc
before releasing the lock.

Fixes: b05972f01e7d ("net: sched: tbf: don't call qdisc_put() while holding tree lock")
Reported-by: Gerrard Tai <gerrard.tai@starlabs.sg>
Suggested-by: Gerrard Tai <gerrard.tai@starlabs.sg>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250611111515.1983366-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net_sched: tbf: fix a race in tbf_change()

Gerrard Tai reported a race condition in TBF, whenever SFQ perturb timer
fires at the wrong time.

The race is as follows:

CPU 0                                 CPU 1
[1]: lock root
[2]: qdisc_tree_flush_backlog()
[3]: unlock root
|
|                                    [5]: lock root
|                                    [6]: rehash
|                                    [7]: qdisc_tree_reduce_backlog()
|
[4]: qdisc_put()

This can be abused to underflow a parent's qlen.

Calling qdisc_purge_queue() instead of qdisc_tree_flush_backlog()
should fix the race, because all packets will be purged from the qdisc
before releasing the lock.

Fixes: b05972f01e7d ("net: sched: tbf: don't call qdisc_put() while holding tree lock")
Reported-by: Gerrard Tai <gerrard.tai@starlabs.sg>
Suggested-by: Gerrard Tai <gerrard.tai@starlabs.sg>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Zhengchao Shao <shaozhengchao@huawei.com>
Link: https://patch.msgid.link/20250611111515.1983366-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net_sched: red: fix a race in __red_change()

Gerrard Tai reported a race condition in RED, whenever SFQ perturb timer
fires at the wrong time.

The race is as follows:

CPU 0                                 CPU 1
[1]: lock root
[2]: qdisc_tree_flush_backlog()
[3]: unlock root
|
|                                    [5]: lock root
|                                    [6]: rehash
|                                    [7]: qdisc_tree_reduce_backlog()
|
[4]: qdisc_put()

This can be abused to underflow a parent's qlen.

Calling qdisc_purge_queue() instead of qdisc_tree_flush_backlog()
should fix the race, because all packets will be purged from the qdisc
before releasing the lock.

Fixes: 0c8d13ac9607 ("net: sched: red: delay destroying child qdisc on replace")
Reported-by: Gerrard Tai <gerrard.tai@starlabs.sg>
Suggested-by: Gerrard Tai <gerrard.tai@starlabs.sg>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250611111515.1983366-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net_sched: prio: fix a race in prio_tune()

Gerrard Tai reported a race condition in PRIO, whenever SFQ perturb timer
fires at the wrong time.

The race is as follows:

CPU 0                                 CPU 1
[1]: lock root
[2]: qdisc_tree_flush_backlog()
[3]: unlock root
|
|                                    [5]: lock root
|                                    [6]: rehash
|                                    [7]: qdisc_tree_reduce_backlog()
|
[4]: qdisc_put()

This can be abused to underflow a parent's qlen.

Calling qdisc_purge_queue() instead of qdisc_tree_flush_backlog()
should fix the race, because all packets will be purged from the qdisc
before releasing the lock.

Fixes: 7b8e0b6e6599 ("net: sched: prio: delay destroying child qdiscs on change")
Reported-by: Gerrard Tai <gerrard.tai@starlabs.sg>
Suggested-by: Gerrard Tai <gerrard.tai@starlabs.sg>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250611111515.1983366-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net_sched: sch_sfq: reject invalid perturb period

Gerrard Tai reported that SFQ perturb_period has no range check yet,
and this can be used to trigger a race condition fixed in a separate patch.

We want to make sure ctl->perturb_period * HZ will not overflow
and is positive.

Tested:

tc qd add dev lo root sfq perturb -10 # negative value : error
Error: sch_sfq: invalid perturb period.

tc qd add dev lo root sfq perturb 1000000000 # too big : error
Error: sch_sfq: invalid perturb period.

tc qd add dev lo root sfq perturb 2000000 # acceptable value
tc -s -d qd sh dev lo
qdisc sfq 8005: root refcnt 2 limit 127p quantum 64Kb depth 127 flows 128 divisor 1024 perturb 2000000sec
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Gerrard Tai <gerrard.tai@starlabs.sg>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20250611083501.1810459-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: phy: phy_caps: Don't skip better duplex macth on non-exact match

When performing a non-exact phy_caps lookup, we are looking for a
supported mode that matches as closely as possible the passed speed/duplex.

Blamed patch broke that logic by returning a match too early in case
the caller asks for half-duplex, as a full-duplex linkmode may match
first, and returned as a non-exact match without even trying to mach on
half-duplex modes.

Reported-by: Jijie Shao <shaojijie@huawei.com>
Closes: https://lore.kernel.org/netdev/20250603102500.4ec743cf@fedora/T/#m22ed60ca635c67dc7d9cbb47e8995b2beb5c1576
Tested-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Fixes: fc81e257d19f ("net: phy: phy_caps: Allow looking-up link caps based on speed and duplex")
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20250606094321.483602-1-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'cpufreq-arm-fixes-6.16-rc' of git://git./linux/kernel/git/vireshk/pm

Merge CPUFreq fixes for 6.16-rc from Viresh Kumar:

"- Implement CpuId rust abstraction and use it to fix doctest failure
   (Viresh Kumar).
- Minor cleanups in the `# Safety` sections for cpufreq abstractions
   (Viresh Kumar)."

* tag 'cpufreq-arm-fixes-6.16-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
  rust: cpu: Add CpuId::current() to retrieve current CPU ID
  rust: Use CpuId in place of raw CPU numbers
  rust: cpu: Introduce CpuId abstraction
  cpufreq: Convert `/// SAFETY` lines to `# Safety` sections

rust: cpu: Add CpuId::current() to retrieve current CPU ID

Introduce `CpuId::current()`, a constructor that wraps the C function
`raw_smp_processor_id()` to retrieve the current CPU identifier without
guaranteeing stability.

This function should be used only when the caller can ensure that
the CPU ID won't change unexpectedly due to preemption or migration.

Suggested-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>

rust: Use CpuId in place of raw CPU numbers

Use the newly defined `CpuId` abstraction instead of raw CPU numbers.

This also fixes a doctest failure for configurations where `nr_cpu_ids <
4`.

The C `cpumask_{set|clear}_cpu()` APIs emit a warning when given an
invalid CPU number — but only if `CONFIG_DEBUG_PER_CPU_MAPS=y` is set.

Meanwhile, `cpumask_weight()` only considers CPUs up to `nr_cpu_ids`,
which can cause inconsistencies: a CPU number greater than `nr_cpu_ids`
may be set in the mask, yet the weight calculation won't reflect it.

This leads to doctest failures when `nr_cpu_ids < 4`, as the test tries
to set CPUs 2 and 3:

rust_doctest_kernel_cpumask_rs_0.location: rust/kernel/cpumask.rs:180
rust_doctest_kernel_cpumask_rs_0: ASSERTION FAILED at rust/kernel/cpumask.rs:190

Fixes: 8961b8cb3099 ("rust: cpumask: Add initial abstractions")
Reported-by: Miguel Ojeda <ojeda@kernel.org>
Closes: https://lore.kernel.org/rust-for-linux/CANiq72k3ozKkLMinTLQwvkyg9K=BeRxs1oYZSKhJHY-veEyZdg@mail.gmail.com/
Reported-by: Andreas Hindborg <a.hindborg@kernel.org>
Closes: https://lore.kernel.org/all/87qzzy3ric.fsf@kernel.org/
Suggested-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>

KVM: x86/mmu: Reject direct bits in gpa passed to KVM_PRE_FAULT_MEMORY

Only let userspace pass the same addresses that were used in KVM_SET_USER_MEMORY_REGION
(or KVM_SET_USER_MEMORY_REGION2); gpas in the the upper half of the address space
are an implementation detail of TDX and KVM.

Extracted from a patch by Sean Christopherson <seanjc@google.com>.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: x86/mmu: Embed direct bits into gpa for KVM_PRE_FAULT_MEMORY

Bug[*] reported for TDX case when enabling KVM_PRE_FAULT_MEMORY in QEMU.

It turns out that @gpa passed to kvm_mmu_do_page_fault() doesn't have
shared bit set when the memory attribute of it is shared, and it leads
to wrong root in tdp_mmu_get_root_for_fault().

Fix it by embedding the direct bits in the gpa that is passed to
kvm_tdp_map_page(), when the memory of the gpa is not private.

[*] https://lore.kernel.org/qemu-devel/4a757796-11c2-47f1-ae0d-335626e818fd@intel.com/

Reported-by: Xiaoyao Li <xiaoyao.li@intel.com>
Closes: https://lore.kernel.org/qemu-devel/4a757796-11c2-47f1-ae0d-335626e818fd@intel.com/
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-ID: <20250611001018.2179964-1-xiaoyao.li@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

bcachefs: Don't trace should_be_locked unless changing

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Ensure that snapshot creation propagates has_case_insensitive

We normally can't create a new directory with the case-insensitive
option already set - except when we're creating a snapshot.

And if casefolding is enabled filesystem wide, we should still set it
even though not strictly required, for consistency.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Print devices we're mounting on multi device filesystems

Previously, we only ever logged the filesystem UUID.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Don't trust sb->nr_devices in members_to_text()

We have to be able to print superblock sections even if they fail to
validate (for debugging), so we have to calculate the number of entries
from the field size.

Reported-by: syzbot+5138f00559ffb3cb3610@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Fix version checks in validate_bset()

It seems btree node scan picked up a partially overwritten btree node,
and corrected the "bset version older than sb version_min" error -
resulting in an invalid superblock with a bad version_min field.

Don't run this check at all when we're in btree node scan, and when we
do run it, do something saner if the bset version is totally crazy.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: ioctl: avoid stack overflow warning

Multiple ioctl handlers individually use a lot of stack space, and clang chooses
to inline them into the bch2_fs_ioctl() function, blowing through the warning
limit:

fs/bcachefs/chardev.c:655:6: error: stack frame size (1032) exceeds limit (1024) in 'bch2_fs_ioctl' [-Werror,-Wframe-larger-than]
655 | long bch2_fs_ioctl(struct bch_fs *c, unsigned cmd, void __user *arg)

By marking the largest two of them as noinline_for_stack, no indidual code path
ends up using this much, which avoids the warning and reduces the possible
total stack usage in the ioctl handler.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Don't pass trans to fsck_err() in gc_accounting_done

fsck_err() can return a transaction restart if passed a transaction
object - this has always been true when it has to drop locks to prompt
for user input, but we're seeing this more now that we're logging the
error being corrected in the journal.

gc_accounting_done() doesn't call fsck_err() from an actual commit loop,
and it doesn't need to be holding btree locks when it calls fsck_err(),
so the easy fix here for the unhandled transaction restart is to just
not pass it the transaction object. We'll miss out on the fancy new
logging, but that's ok.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Fix leak in bch2_fs_recovery() error path

Fix a small leak of the superblock 'clean' section.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Fix rcu_pending for PREEMPT_RT

PREEMPT_RT redefines how standard spinlocks work, so local_irq_save() +
spin_lock() is no longer equivalent to spin_lock_irqsave(). Fortunately,
we don't strictly need to do it that way.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Fix downgrade_table_extra()

Fix a UAF: we were calling darray_make_room() and retaining a pointer to
the old buffer.

And fix an UBSAN warning: struct bch_sb_field_downgrade_entry uses
__counted_by, so set dst->nr_errors before assigning to the array entry.

Reported-by: syzbot+14c52d86ddbd89bea13e@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Don't put rhashtable on stack

Object debugging generally needs special provisions for putting said
objects on the stack, which rhashtable does not have.

Reported-by: syzbot+bcc38a9556d0324c2ec2@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Make sure opts.read_only gets propagated back to VFS

If we think we're read-only but the VFS doesn't, fun will ensue.

And now that we know we have to be able to do this safely, just make
nochanges imply ro.

Reported-by: syzbot+a7d6ceaba099cc21dee4@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Fix possible console lock involved deadlock

Link: https://lore.kernel.org/all/6822ab02.050a0220.f2294.00cb.GAE@google.com/T/
Reported-by: syzbot+2c3ef91c9523c3d1a25c@syzkaller.appspotmail.com
Signed-off-by: Alan Huang <mmpgouride@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: mark more errors autofix

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Don't persistently run scan_for_btree_nodes

bch2_btree_lost_data() gets called on btree node read error, but the
error might be transient.

btree_node_scan is expensive, and there's no need to run it persistently
(marking it in the superblock as required to run) - check_topology
will run it if required, via bch2_get_scanned_nodes().

Running it non-persistently is fine, to avoid check_topology having to
rewind recovery to run it.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Read error message now prints if self healing

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Only run 'increase_depth' for keys from btree node csan

bch2_btree_increase_depth() was originally for disaster recovery, to get
some data back from the journal when a btree root was bad.

We don't need it for that purpose anymore; on bad btree root we'll
launch btree node scan and reconstruct all the interior nodes.

If there's a key in the journal for a depth that doesn't exists, and
it's not from check_topology/btree node scan, we should just ignore it.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Mark need_discard_freespace_key_bad autofix

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Update /dev/disk/by-uuid on device add

Invalidate pagecache after we write the new superblock and send a
uevent.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Add more flags to btree nodes for rewrite reason

It seems excessive forced btree node rewrites can cause interior btree
updates to become wedged during recovery, before we're using the write
buffer for backpointer updates.

Add more flags so we can determine where these are coming from.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Add range being updated to btree_update_to_text()

We had a deadlock during recovery where interior btree updates became
wedged and all open_buckets were consumed; start adding more
introspection.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Log fsck errors in the journal

Log the specific error being corrected in the journal when we're
repairing, this helps greatly with 'bcachefs list_journal' analysis.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Add missing restart handling to check_topology()

The next patch will add logging of the specific error being corrected in
repair paths to the journal; this means __bch2_fsck_err() can return
transaction restarts in places that previously weren't expecting them.

check_topology() is old code that doesn't use btree iterators for btree
node locking - it'll have to be rewritten in the future to work online.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

rust: cpu: Introduce CpuId abstraction

This adds abstraction for representing a CPU identifier.

Suggested-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>

Merge tag 'bpf-fixes' of git://git./linux/kernel/git/bpf/bpf

Pull BPF fixes from Alexei Starovoitov

- Fix libbpf backward compatibility (Andrii Nakryiko)

- Add Stanislav Fomichev as bpf/net reviewer

- Fix resolve_btfid build when cross compiling (Suleiman Souhlal)

* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
  MAINTAINERS: Add myself as bpf networking reviewer
  tools/resolve_btfids: Fix build when cross compiling kernel with clang.
  libbpf: Handle unsupported mmap-based /sys/kernel/btf/vmlinux correctly

MAINTAINERS: Update Kuniyuki Iwashima's email address.

I left Amazon and joined Google, so let's map the email
addresses accordingly.

Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250610235734.88540-1-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: net: add test case for NAT46 looping back dst

Simple test for crash involving multicast loopback and stale dst.
Reuse exising NAT46 program.

Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250610001245.1981782-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: clear the dst when changing skb protocol

A not-so-careful NAT46 BPF program can crash the kernel
if it indiscriminately flips ingress packets from v4 to v6:

  BUG: kernel NULL pointer dereference, address: 0000000000000000
    ip6_rcv_core (net/ipv6/ip6_input.c:190:20)
    ipv6_rcv (net/ipv6/ip6_input.c:306:8)
    process_backlog (net/core/dev.c:6186:4)
    napi_poll (net/core/dev.c:6906:9)
    net_rx_action (net/core/dev.c:7028:13)
    do_softirq (kernel/softirq.c:462:3)
    netif_rx (net/core/dev.c:5326:3)
    dev_loopback_xmit (net/core/dev.c:4015:2)
    ip_mc_finish_output (net/ipv4/ip_output.c:363:8)
    NF_HOOK (./include/linux/netfilter.h:314:9)
    ip_mc_output (net/ipv4/ip_output.c:400:5)
    dst_output (./include/net/dst.h:459:9)
    ip_local_out (net/ipv4/ip_output.c:130:9)
    ip_send_skb (net/ipv4/ip_output.c:1496:8)
    udp_send_skb (net/ipv4/udp.c:1040:8)
    udp_sendmsg (net/ipv4/udp.c:1328:10)

The output interface has a 4->6 program attached at ingress.
We try to loop the multicast skb back to the sending socket.
Ingress BPF runs as part of netif_rx(), pushes a valid v6 hdr
and changes skb->protocol to v6. We enter ip6_rcv_core which
tries to use skb_dst(). But the dst is still an IPv4 one left
after IPv4 mcast output.

Clear the dst in all BPF helpers which change the protocol.
Try to preserve metadata dsts, those may carry non-routing
metadata.

Cc: stable@vger.kernel.org
Reviewed-by: Maciej Żenczykowski <maze@google.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Fixes: d219df60a70e ("bpf: Add ipip6 and ip6ip decap support for bpf_skb_adjust_room()")
Fixes: 1b00e0dfe7d0 ("bpf: update skb->protocol in bpf_skb_net_grow")
Fixes: 6578171a7ff0 ("bpf: add bpf_skb_change_proto helper")
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250610001245.1981782-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mm: pgtable: fix pte_swp_exclusive

Make pte_swp_exclusive return bool instead of int. This will better
reflect how pte_swp_exclusive is actually used in the code.

This fixes swap/swapoff problems on Alpha due pte_swp_exclusive not
returning correct values when _PAGE_SWP_EXCLUSIVE bit resides in upper
32-bits of PTE (like on alpha).

Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Magnus Lindholm <linmag7@gmail.com>
Cc: Sam James <sam@gentoo.org>
Link: https://lore.kernel.org/lkml/20250218175735.19882-2-linmag7@gmail.com/
Link: https://lore.kernel.org/lkml/20250602041118.GA2675383@ZenIV/
[ Applied as the 'sed' script Al suggested - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'mlx5-misc-fixes-2025-06-10'

Mark Bloch says:

====================
mlx5 misc fixes 2025-06-10

This patchset includes misc fixes from the team for the mlx5 core
and Ethernet drivers.
====================

Link: https://patch.msgid.link/20250610151514.1094735-1-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/mlx5e: Fix number of lanes to UNKNOWN when using data_rate_oper

When the link is up, either eth_proto_oper or ext_eth_proto_oper
typically reports the active link protocol, from which both speed
and number of lanes can be retrieved. However, in certain cases,
such as when a NIC is connected via a non-standard cable, the
firmware may not report the protocol.

In such scenarios, the speed can still be obtained from the
data_rate_oper field in PTYS register. Since data_rate_oper
provides only speed information and lacks lane details, it is
incorrect to derive the number of lanes from it.

This patch corrects the behavior by setting the number of lanes to
UNKNOWN instead of incorrectly using MAX_LANES when relying on
data_rate_oper.

Fixes: 7e959797f021 ("net/mlx5e: Enable lanes configuration when auto-negotiation is off")
Signed-off-by: Shahar Shitrit <shshitrit@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250610151514.1094735-10-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/mlx5e: Fix leak of Geneve TLV option object

Previously, a unique tunnel id was added for the matching on TC
non-zero chains, to support inner header rewrite with goto action.
Later, it was used to support VF tunnel offload for vxlan, then for
Geneve and GRE. To support VF tunnel, a temporary mlx5_flow_spec is
used to parse tunnel options. For Geneve, if there is TLV option, a
object is created, or refcnt is added if already exists. But the
temporary mlx5_flow_spec is directly freed after parsing, which causes
the leak because no information regarding the object is saved in
flow's mlx5_flow_spec, which is used to free the object when deleting
the flow.

To fix the leak, call mlx5_geneve_tlv_option_del() before free the
temporary spec if it has TLV object.

Fixes: 521933cdc4aa ("net/mlx5e: Support Geneve and GRE with VF tunnel offload")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Alex Lazar <alazar@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250610151514.1094735-9-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/mlx5: HWS, make sure the uplink is the last destination

When there are more than one destinations, we create a FW flow
table and provide it with all the destinations. FW requires to
have wire as the last destination in the list (if it exists),
otherwise the operation fails with FW syndrome.

This patch fixes the destination array action creation: if it
contains a wire destination, it is moved to the end.

Fixes: 504e536d9010 ("net/mlx5: HWS, added actions handling")
Signed-off-by: Vlad Dogaru <vdogaru@nvidia.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250610151514.1094735-7-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/mlx5: HWS, fix missing ip_version handling in definer

Fix missing field handling in definer - outer IP version.

Fixes: 74a778b4a63f ("net/mlx5: HWS, added definers handling")
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250610151514.1094735-6-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/mlx5: HWS, Init mutex on the correct path

The newly introduced mutex is only used for reformat actions, but it was
initialized for modify header instead.

The struct that contains the mutex is zero-initialized and an all-zero
mutex is valid, so the issue only shows up with CONFIG_DEBUG_MUTEXES.

Fixes: b206d9ec19df ("net/mlx5: HWS, register reformat actions with fw")
Signed-off-by: Vlad Dogaru <vdogaru@nvidia.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250610151514.1094735-5-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/mlx5: Fix return value when searching for existing flow group

When attempting to add a rule to an existing flow group, if a matching
flow group exists but is not active, the error code returned should be
EAGAIN, so that the rule can be added to the matching flow group once
it is active, rather than ENOENT, which indicates that no matching
flow group was found.

Fixes: bd71b08ec2ee ("net/mlx5: Support multiple updates of steering rules in parallel")
Signed-off-by: Gavi Teitz <gavi@nvidia.com>
Signed-off-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250610151514.1094735-4-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/mlx5: Fix ECVF vports unload on shutdown flow

Fix shutdown flow UAF when a virtual function is created on the embedded
chip (ECVF) of a BlueField device. In such case the vport acl ingress
table is not properly destroyed.

ECVF functionality is independent of ecpf_vport_exists capability and
thus functions mlx5_eswitch_(enable|disable)_pf_vf_vports() should not
test it when enabling/disabling ECVF vports.

kernel log:
[] refcount_t: underflow; use-after-free.
[] WARNING: CPU: 3 PID: 1 at lib/refcount.c:28
refcount_warn_saturate+0x124/0x220
----------------
[] Call trace:
[] refcount_warn_saturate+0x124/0x220
[] tree_put_node+0x164/0x1e0 [mlx5_core]
[] mlx5_destroy_flow_table+0x98/0x2c0 [mlx5_core]
[] esw_acl_ingress_table_destroy+0x28/0x40 [mlx5_core]
[] esw_acl_ingress_lgcy_cleanup+0x80/0xf4 [mlx5_core]
[] esw_legacy_vport_acl_cleanup+0x44/0x60 [mlx5_core]
[] esw_vport_cleanup+0x64/0x90 [mlx5_core]
[] mlx5_esw_vport_disable+0xc0/0x1d0 [mlx5_core]
[] mlx5_eswitch_unload_ec_vf_vports+0xcc/0x150 [mlx5_core]
[] mlx5_eswitch_disable_sriov+0x198/0x2a0 [mlx5_core]
[] mlx5_device_disable_sriov+0xb8/0x1e0 [mlx5_core]
[] mlx5_sriov_detach+0x40/0x50 [mlx5_core]
[] mlx5_unload+0x40/0xc4 [mlx5_core]
[] mlx5_unload_one_devl_locked+0x6c/0xe4 [mlx5_core]
[] mlx5_unload_one+0x3c/0x60 [mlx5_core]
[] shutdown+0x7c/0xa4 [mlx5_core]
[] pci_device_shutdown+0x3c/0xa0
[] device_shutdown+0x170/0x340
[] __do_sys_reboot+0x1f4/0x2a0
[] __arm64_sys_reboot+0x2c/0x40
[] invoke_syscall+0x78/0x100
[] el0_svc_common.constprop.0+0x54/0x184
[] do_el0_svc+0x30/0xac
[] el0_svc+0x48/0x160
[] el0t_64_sync_handler+0xa4/0x12c
[] el0t_64_sync+0x1a4/0x1a8
[] --[ end trace 9c4601d68c70030e ]---

Fixes: a7719b29a821 ("net/mlx5: Add management of EC VF vports")
Reviewed-by: Daniel Jurgens <danielj@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Amir Tzin <amirtz@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250610151514.1094735-3-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/mlx5: Ensure fw pages are always allocated on same NUMA

When firmware asks the driver to allocate more pages, using event of
give_pages, the driver should always allocate it from same NUMA, the
original device NUMA. Current code uses dev_to_node() which can result
in different NUMA as it is changed by other driver flows, such as
mlx5_dma_zalloc_coherent_node(). Instead, use saved numa node for
allocating firmware pages.

Fixes: 311c7c71c9bb ("net/mlx5e: Allocate DMA coherent memory on reader NUMA node")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250610151514.1094735-2-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch '40GbE' of git://git./linux/kernel/git/tnguy/net-queue

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2025-06-10 (i40e, iavf, ice, e1000)

For i40e:
Robert Malz improves reset handling for situations where multiple reset
requests could cause some to be missed.

For iavf:
Ahmed adds detection, and handling, of reset that could occur early in
the initialization process to stop long wait/hangs.

For ice:
Anton, properly, sets missed use_nsecs value.

For e1000:
Joe Damato moves cancel_work_sync() call to avoid deadlock.

* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
  e1000: Move cancel_work_sync to avoid deadlock
  ice/ptp: fix crosstimestamp reporting
  iavf: fix reset_task for early reset event
  i40e: retry VFLR handling if there is ongoing VF reset
  i40e: return false from i40e_reset_vf if reset is in progress
====================

Link: https://patch.msgid.link/20250610171348.1476574-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Bluetooth: MGMT: Fix sparse errors

This fixes the following errors:

net/bluetooth/mgmt.c:5400:59: sparse: sparse: incorrect type in argument 3
(different base types) @@     expected unsigned short [usertype] handle @@
got restricted __le16 [usertype] monitor_handle @@
net/bluetooth/mgmt.c:5400:59: sparse:     expected unsigned short [usertype] handle
net/bluetooth/mgmt.c:5400:59: sparse:     got restricted __le16 [usertype] monitor_handle

Fixes: e6ed54e86aae ("Bluetooth: MGMT: Fix UAF on mgmt_remove_adv_monitor_complete")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202506060347.ux2O1p7L-lkp@intel.com/
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Bluetooth: ISO: Fix not using bc_sid as advertisement SID

Currently bc_sid is being ignore when acting as Broadcast Source role,
so this fix it by passing the bc_sid and then use it when programming
the PA:

< HCI Command: LE Set Exte.. (0x08|0x0036) plen 25
        Handle: 0x01
        Properties: 0x0000
        Min advertising interval: 140.000 msec (0x00e0)
        Max advertising interval: 140.000 msec (0x00e0)
        Channel map: 37, 38, 39 (0x07)
        Own address type: Random (0x01)
        Peer address type: Public (0x00)
        Peer address: 00:00:00:00:00:00 (OUI 00-00-00)
        Filter policy: Allow Scan Request from Any, Allow Connect Request from Any (0x00)
        TX power: Host has no preference (0x7f)
        Primary PHY: LE 1M (0x01)
        Secondary max skip: 0x00
        Secondary PHY: LE 2M (0x02)
        SID: 0x01
        Scan request notifications: Disabled (0x00)

Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Bluetooth: ISO: Fix using BT_SK_PA_SYNC to detect BIS sockets

BT_SK_PA_SYNC is only valid for Broadcast Sinks which means socket used
for Broadcast Sources wouldn't be able to use the likes of getpeername
to read out the sockaddr_iso_bc fields which may have been update (e.g.
bc_sid).

Fixes: 0a766a0affb5 ("Bluetooth: ISO: Fix getpeername not returning sockaddr_iso_bc fields")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Bluetooth: eir: Fix possible crashes on eir_create_adv_data

eir_create_adv_data may attempt to add EIR_FLAGS and EIR_TX_POWER
without checking if that would fit.

Link: https://github.com/bluez/bluez/issues/1117#issuecomment-2958244066
Fixes: 01ce70b0a274 ("Bluetooth: eir: Move EIR/Adv Data functions to its own file")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Bluetooth: hci_sync: Fix broadcast/PA when using an existing instance

When using and existing adv_info instance for broadcast source it
needs to be updated to periodic first before it can be reused, also in
case the existing instance already have data hci_set_adv_instance_data
cannot be used directly since it would overwrite the existing data so
this reappend the original data after the Broadcast ID, if one was
generated.

Example:

bluetoothctl># Add PBP to EA so it can be later referenced as the BIS ID
bluetoothctl> advertise.service 0x1856 0x00 0x00
bluetoothctl> advertise on
...
< HCI Command: LE Set Extended Advertising Data (0x08|0x0037) plen 13
        Handle: 0x01
        Operation: Complete extended advertising data (0x03)
        Fragment preference: Minimize fragmentation (0x01)
        Data length: 0x09
        Service Data: Public Broadcast Announcement (0x1856)
          Data[2]: 0000
        Flags: 0x06
          LE General Discoverable Mode
          BR/EDR Not Supported
...
bluetoothctl># Attempt to acquire Broadcast Source transport
bluetoothctl>transport.acquire /org/bluez/hci0/pac_bcast0/fd0
...
< HCI Command: LE Set Extended Advertising Data (0x08|0x0037) plen 255
        Handle: 0x01
        Operation: Complete extended advertising data (0x03)
        Fragment preference: Minimize fragmentation (0x01)
        Data length: 0x0e
        Service Data: Broadcast Audio Announcement (0x1852)
        Broadcast ID: 11371620 (0xad8464)
        Service Data: Public Broadcast Announcement (0x1856)
          Data[2]: 0000
        Flags: 0x06
          LE General Discoverable Mode
          BR/EDR Not Supported

Link: https://github.com/bluez/bluez/issues/1117
Fixes: eca0ae4aea66 ("Bluetooth: Add initial implementation of BIS connections")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Bluetooth: Fix NULL pointer deference on eir_get_service_data

The len parameter is considered optional so it can be NULL so it cannot
be used for skipping to next entry of EIR_SERVICE_DATA.

Fixes: 8f9ae5b3ae80 ("Bluetooth: eir: Add helpers for managing service data")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

KEYS: Invert FINAL_PUT bit

Invert the FINAL_PUT bit so that test_bit_acquire and clear_bit_unlock
can be used instead of smp_mb.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

KVM: SEV: Disable SEV-SNP support on initialization failure

During platform init, SNP initialization may fail for several reasons,
such as firmware command failures and incompatible versions. However,
the KVM capability may continue to advertise support for it.

The platform may have SNP enabled but if SNP_INIT fails then SNP is
not supported by KVM.

During KVM module initialization query the SNP platform status to obtain
the SNP initialization state and use it as an additional condition to
determine support for SEV-SNP.

Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Co-developed-by: Pratik R. Sampat <prsampat@amd.com>
Signed-off-by: Pratik R. Sampat <prsampat@amd.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@amd.com>
Reviewed-by: Pavan Kumar Paluri <papaluri@amd.com>
Message-ID: <20250512221634.12045-1-Ashish.Kalra@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Merge tag 'kvmarm-fixes-6.16-2' of git://git./linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/arm64 fixes for 6.16, take #2

- Rework of system register accessors for system registers that are
  directly writen to memory, so that sanitisation of the in-memory
  value happens at the correct time (after the read, or before the
  write). For convenience, RMW-style accessors are also provided.

- Multiple fixes for the so-called "arch-timer-edge-cases' selftest,
  which was always broken.

spi: stm32-ospi: clean up on error in probe()

If reset_control_acquire() fails, then we can't return directly.
We need to do a little clean up first.

Fixes: cf2c3eceb757 ("spi: stm32-ospi: Make usage of reset_control_acquire/release() API")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/aEmAGTUzzKZlLe3K@stanley.mountain
Signed-off-by: Mark Brown <broonie@kernel.org>

net/mdiobus: Fix potential out-of-bounds clause 45 read/write access

When using publicly available tools like 'mdio-tools' to read/write data
from/to network interface and its PHY via C45 (clause 45) mdiobus,
there is no verification of parameters passed to the ioctl and
it accepts any mdio address.
Currently there is support for 32 addresses in kernel via PHY_MAX_ADDR define,
but it is possible to pass higher value than that via ioctl.
While read/write operation should generally fail in this case,
mdiobus provides stats array, where wrong address may allow out-of-bounds
read/write.

Fix that by adding address verification before C45 read/write operation.
While this excludes this access from any statistics, it improves security of
read/write operation.

Fixes: 4e4aafcddbbf ("net: mdio: Add dedicated C45 API to MDIO bus drivers")
Signed-off-by: Jakub Raczynski <j.raczynski@samsung.com>
Reported-by: Wenjing Shan <wenjing.shan@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/mdiobus: Fix potential out-of-bounds read/write access

When using publicly available tools like 'mdio-tools' to read/write data
from/to network interface and its PHY via mdiobus, there is no verification of
parameters passed to the ioctl and it accepts any mdio address.
Currently there is support for 32 addresses in kernel via PHY_MAX_ADDR define,
but it is possible to pass higher value than that via ioctl.
While read/write operation should generally fail in this case,
mdiobus provides stats array, where wrong address may allow out-of-bounds
read/write.

Fix that by adding address verification before read/write operation.
While this excludes this access from any statistics, it improves security of
read/write operation.

Fixes: 080bb352fad00 ("net: phy: Maintain MDIO device and bus statistics")
Signed-off-by: Jakub Raczynski <j.raczynski@samsung.com>
Reported-by: Wenjing Shan <wenjing.shan@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

wifi: cfg80211: use kfree_sensitive() for connkeys cleanup

The nl80211_parse_connkeys() function currently uses kfree() to release
the 'result' structure in error handling paths. However, if an error
occurs due to result->def being less than 0, the 'result' structure may
contain sensitive information.

To prevent potential leakage of sensitive data, replace kfree() with
kfree_sensitive() when freeing 'result'. This change aligns with the
approach used in its caller, nl80211_join_ibss(), enhancing the overall
security of the wireless subsystem.

Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Link: https://patch.msgid.link/20250523110156.4017111-1-zilin@seu.edu.cn
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Merge tag 'ath-current-20250608' of git://git./linux/kernel/git/ath/ath

Jeff Johnson says:
==================
ath.git updates for v6.16-rc2

Fix a handful of both build and stability issues across multiple drivers.
==================

Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: fix merge damage related to iwl_pci_resume

The changes I made in
wifi: iwlwifi: don't warn if the NIC is gone in resume
conflicted with a major rework done in this area.
The merge de-facto removed my changes.
Re-add them.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20250603091754.70182-1-emmanuel.grumbach@intel.com
Fixes: 06c4b2036818 ("Merge tag 'iwlwifi-next-2025-05-15' of https://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Revert "wifi: mwifiex: Fix HT40 bandwidth issue."

This reverts commit 4fcfcbe45734 ("wifi: mwifiex: Fix HT40 bandwidth
issue.")

That commit introduces a regression, when HT40 mode is enabled,
received packets are lost, this was experience with W8997 with both
SDIO-UART and SDIO-SDIO variants. From an initial investigation the
issue solves on its own after some time, but it's not clear what is
the reason. Given that this was just a performance optimization, let's
revert it till we have a better understanding of the issue and a proper
fix.

Cc: Jeff Chen <jeff.chen_1@nxp.com>
Cc: stable@vger.kernel.org
Fixes: 4fcfcbe45734 ("wifi: mwifiex: Fix HT40 bandwidth issue.")
Closes: https://lore.kernel.org/all/20250603203337.GA109929@francesco-nb/
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://patch.msgid.link/20250605130302.55555-1-francesco@dolcini.it
[fix commit reference format]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

macsec: MACsec SCI assignment for ES = 0

According to 802.1AE standard, when ES and SC flags in TCI are zero,
used SCI should be the current active SC_RX. Current code uses the
header MAC address. Without this patch, when ES flag is 0 (using a
bridge or switch), header MAC will not fit the SCI and MACSec frames
will be discarted.

In order to test this issue, MACsec link should be stablished between
two interfaces, setting SC and ES flags to zero and a port identifier
different than one. For example, using ip macsec tools:

ip link add link $ETH0 macsec0 type macsec port 11 send_sci off
end_station off
ip macsec add macsec0 tx sa 0 pn 2 on key 01 $ETH1_KEY
ip macsec add macsec0 rx port 11 address $ETH1_MAC
ip macsec add macsec0 rx port 11 address $ETH1_MAC sa 0 pn 2 on key 02
ip link set dev macsec0 up

ip link add link $ETH1 macsec1 type macsec port 11 send_sci off
end_station off
ip macsec add macsec1 tx sa 0 pn 2 on key 01 $ETH0_KEY
ip macsec add macsec1 rx port 11 address $ETH0_MAC
ip macsec add macsec1 rx port 11 address $ETH0_MAC sa 0 pn 2 on key 02
ip link set dev macsec1 up

Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver")
Co-developed-by: Andreu Montiel <Andreu.Montiel@technica-engineering.de>
Signed-off-by: Andreu Montiel <Andreu.Montiel@technica-engineering.de>
Signed-off-by: Carlos Fernandez <carlos.fernandez@technica-engineering.de>
Reviewed-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

crypto: hkdf - move to late_initcall

The HKDF self-tests depend on the HMAC algorithms being registered.
HMAC is now registered at module_init, which put it at the same level as
HKDF. Move HKDF to late_initcall so that it runs afterwards.

Fixes: ef93f1562803 ("Revert "crypto: run initcalls for generic implementations earlier"")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

net: airoha: Enable RX queues 16-31

Fix RX_DONE_INT_MASK definition in order to enable RX queues 16-31.

Fixes: f252493e18353 ("net: airoha: Enable multiple IRQ lines support in airoha_eth driver.")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250609-aioha-fix-rx-queue-mask-v1-1-f33706a06fa2@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

netconsole: fix appending sysdata when sysdata_fields == SYSDATA_RELEASE

Before appending sysdata, prepare_extradata() checks if any feature is
enabled in sysdata_fields (and exits early if none is enabled).

When SYSDATA_RELEASE was introduced, we missed adding it to the list of
features being checked against sysdata_fields in prepare_extradata().
The result was that, if only SYSDATA_RELEASE is enabled in
sysdata_fields, we incorreclty exit early and fail to append the
release.

Instead of checking specific bits in sysdata_fields, check if
sysdata_fields has ALL bit zeroed and exit early if true. This fixes
case when only SYSDATA_RELEASE enabled and makes the code more general /
less error prone in future feature implementation.

Signed-off-by: Gustavo Luiz Duarte <gustavold@gmail.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Fixes: cfcc9239e78a ("netconsole: append release to sysdata")
Link: https://patch.msgid.link/20250609-netconsole-fix-v1-1-17543611ae31@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: Fix TOCTOU issue in sk_is_readable()

sk->sk_prot->sock_is_readable is a valid function pointer when sk resides
in a sockmap. After the last sk_psock_put() (which usually happens when
socket is removed from sockmap), sk->sk_prot gets restored and
sk->sk_prot->sock_is_readable becomes NULL.

This makes sk_is_readable() racy, if the value of sk->sk_prot is reloaded
after the initial check. Which in turn may lead to a null pointer
dereference.

Ensure the function pointer does not turn NULL after the check.

Fixes: 8934ce2fd081 ("bpf: sockmap redirect ingress support")
Suggested-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250609-skisreadable-toctou-v1-1-d0dfb2d62c37@rbox.co
Signed-off-by: Jakub Kicinski <kuba@kernel.org>