Arnd Bergmann [Thu, 21 Jul 2022 13:00:18 +0000 (15:00 +0200)]
Merge tag 'qcom-drivers-for-5.20-2' of git://git./linux/kernel/git/qcom/linux into arm/drivers
More Qualcomm driver changes for v5.20
This adds support for booting secondary cores, SPM, SMD-RPM and RPM
power-domain support for the MSM8909 platform.
It drops an unnecessary print in icc-bwmon, corrects SA8540P entries in
socinfo and a Kconfig build dependency for QCOM_RPMPD.
Lastly it continues to clean up up the Devicetree bindings for the
Qualcomm drivers.
* tag 'qcom-drivers-for-5.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
dt-bindings: soc: qcom: qcom,smd-rpm: add power-controller
dt-bindings: soc: qcom: aoss: document qcom,sm8450-aoss-qmp
dt-bindings: soc: qcom,rpmh-rsc: simplify qcom,tcs-config
ARM: mach-qcom: Add support for MSM8909
dt-bindings: arm: cpus: Document "qcom,msm8909-smp" enable-method
soc: qcom: spm: Add CPU data for MSM8909
dt-bindings: soc: qcom: spm: Add MSM8909 CPU compatible
soc: qcom: rpmpd: Add compatible for MSM8909
dt-bindings: power: qcom-rpmpd: Add MSM8909 power domains
soc: qcom: smd-rpm: Add compatible for MSM8909
dt-bindings: soc: qcom: smd-rpm: Add MSM8909
soc: qcom: icc-bwmon: Remove unnecessary print function dev_err()
soc: qcom: socinfo: Fix the id of SA8540P SoC
soc: qcom: Make QCOM_RPMPD depend on PM
Link: https://lore.kernel.org/r/20220720230648.2113609-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Wed, 20 Jul 2022 15:58:18 +0000 (17:58 +0200)]
soc: a64fx-diag: disable modular build
The NMI infrastructure cannot currently be used in loadable modules:
ERROR: modpost: "free_nmi" [drivers/soc/fujitsu/a64fx-diag.ko] undefined!
ERROR: modpost: "request_nmi" [drivers/soc/fujitsu/a64fx-diag.ko] undefined!
ERROR: modpost: "enable_nmi" [drivers/soc/fujitsu/a64fx-diag.ko] undefined!
Disable this for now to make allmodconfig build again. We may revisit
this and export those symbols instead in the future.
Reported-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Krzysztof Kozlowski [Wed, 4 May 2022 13:19:12 +0000 (15:19 +0200)]
dt-bindings: soc: qcom: qcom,smd-rpm: add power-controller
Document power-controller child of Qualcomm RPM over SMD to fix
dtbs_check warnings like:
msm8916-huawei-g7.dtb: rpm-requests: 'power-controller' do not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220504131923.214367-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Krzysztof Kozlowski [Wed, 4 May 2022 13:19:11 +0000 (15:19 +0200)]
dt-bindings: soc: qcom: aoss: document qcom,sm8450-aoss-qmp
Add compatible for qcom,sm8450-aoss-qmp with qcom,aoss-qmp as a
fallback. This fixes dtbs_check warnings like:
sm8450-hdk.dtb: power-controller@
c300000: compatible:0: 'qcom,sm8450-aoss-qmp' is not one of
['qcom,sc7180-aoss-qmp', 'qcom,sc7280-aoss-qmp', 'qcom,sc8180x-aoss-qmp', 'qcom,sdm845-aoss-qmp',
'qcom,sm6350-aoss-qmp', 'qcom,sm8150-aoss-qmp', 'qcom,sm8250-aoss-qmp', 'qcom,sm8350-aoss-qmp']
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220504131923.214367-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Krzysztof Kozlowski [Tue, 26 Apr 2022 11:07:57 +0000 (13:07 +0200)]
dt-bindings: soc: qcom,rpmh-rsc: simplify qcom,tcs-config
The schema for "qcom,tcs-config" property can be a little bit simpler,
without the need of defining each item. Also move the description of
each part of "qcom,tcs-config" tupple to the tupple items description.
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220426110757.80603-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Stephan Gerhold [Tue, 5 Jul 2022 14:35:23 +0000 (16:35 +0200)]
ARM: mach-qcom: Add support for MSM8909
Add a Kconfig entry for MSM8909 and the "qcom,msm8909-smp" CPU
enable-method. The ARM Cortex-A7 cores are booted just like on MSM8226.
Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220705143523.3390944-9-stephan.gerhold@kernkonzept.com
Stephan Gerhold [Tue, 5 Jul 2022 14:35:22 +0000 (16:35 +0200)]
dt-bindings: arm: cpus: Document "qcom,msm8909-smp" enable-method
MSM8909 is a fairly old 32-bit SoC without PSCI support, so the
additional CPU cores need to be initialized with a custom enable-method.
Fortunately it works just like on MSM8226 and MSM8916 so just add
an additional compatible as alias to the DT schema.
Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220705143523.3390944-8-stephan.gerhold@kernkonzept.com
Stephan Gerhold [Tue, 5 Jul 2022 14:35:21 +0000 (16:35 +0200)]
soc: qcom: spm: Add CPU data for MSM8909
Given the lack of public documentation for the SPM, the configuration
data is taken without modification from Qualcomm's msm-3.10 release [1].
It is pretty much identical to the one for MSM8916, except that 0x3B is
missing in the sequence for standalone power collapse for some reason.
[1]: https://git.codelinaro.org/clo/la/kernel/msm-3.10/-/blob/LA.BR.1.2.3-00910-8x09.0/arch/arm/boot/dts/qcom/msm8909-pm8909-pm.dtsi
Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220705143523.3390944-7-stephan.gerhold@kernkonzept.com
Stephan Gerhold [Tue, 5 Jul 2022 14:35:20 +0000 (16:35 +0200)]
dt-bindings: soc: qcom: spm: Add MSM8909 CPU compatible
Document the "qcom,msm8909-saw2-v3.0-cpu" compatible for the CPU
Subsystem Power Manager (SPM) on the MSM8909 SoC. This is necessary
for CPU idle since this is a fairly old 32-bit SoC without support
for PSCI.
Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220705143523.3390944-6-stephan.gerhold@kernkonzept.com
Stephan Gerhold [Tue, 5 Jul 2022 14:35:19 +0000 (16:35 +0200)]
soc: qcom: rpmpd: Add compatible for MSM8909
MSM8909 has the same power domains as MSM8916, so just define another
compatible for the existing definition.
Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220705143523.3390944-5-stephan.gerhold@kernkonzept.com
Stephan Gerhold [Tue, 5 Jul 2022 14:35:18 +0000 (16:35 +0200)]
dt-bindings: power: qcom-rpmpd: Add MSM8909 power domains
MSM8909 has the same power domains as MSM8916 so just define them
as aliases for the existing definitions.
Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220705143523.3390944-4-stephan.gerhold@kernkonzept.com
Stephan Gerhold [Tue, 5 Jul 2022 14:35:17 +0000 (16:35 +0200)]
soc: qcom: smd-rpm: Add compatible for MSM8909
Add the new "qcom,rpm-msm8909" compatible to the driver so the interface
to the Resource Power Manager (RPM) is initialized correctly on MSM8909.
Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220705143523.3390944-3-stephan.gerhold@kernkonzept.com
Stephan Gerhold [Tue, 5 Jul 2022 14:35:16 +0000 (16:35 +0200)]
dt-bindings: soc: qcom: smd-rpm: Add MSM8909
Document the "qcom,rpm-msm8909" compatible to describe the interface to
the Resource Power Manager (RPM) on the MSM8909 SoC.
Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220705143523.3390944-2-stephan.gerhold@kernkonzept.com
Yang Li [Thu, 14 Jul 2022 07:55:32 +0000 (15:55 +0800)]
soc: qcom: icc-bwmon: Remove unnecessary print function dev_err()
Eliminate the follow coccicheck warning:
./drivers/soc/qcom/icc-bwmon.c:349:2-9: line 349 is redundant because platform_get_irq() already prints an error
Fixes:
b9c2ae6cac40 ("soc: qcom: icc-bwmon: Add bandwidth monitoring driver")
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220714075532.104665-1-yang.lee@linux.alibaba.com
Hitomi Hasegawa [Fri, 20 May 2022 07:41:19 +0000 (16:41 +0900)]
soc: fujitsu: Add A64FX diagnostic interrupt driver
Register the NMI/IRQ corresponding to the A64FX's device definition
dedicated to diagnostic interrupts, so that when this interrupt is
sent using the BMC, it causes a panic. This can be used to obtain
a kernel dump.
Signed-off-by: Hitomi Hasegawa <hasegawa-hitomi@fujitsu.com>
Link: https://lore.kernel.org/r/20220520074119.3574753-2-hasegawa-hitomi@fujitsu.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Parikshit Pareek [Mon, 11 Jul 2022 08:39:57 +0000 (14:09 +0530)]
soc: qcom: socinfo: Fix the id of SA8540P SoC
Change the id of SA8540P to its correct value, i.e., 461.
Also, map the id 460 to its correct values, i.e. SA8295P.
Fixes:
76ee15ae1b13 ("soc: qcom: socinfo: Add some more PMICs and SoCs")
Signed-off-by: Parikshit Pareek <quic_ppareek@quicinc.com>
Reviewed-by: Eric Chanudet <echanude@redhat.com>
Tested-by: Eric Chanudet <echanude@redhat.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220711083957.12091-1-quic_ppareek@quicinc.com
Konrad Dybcio [Thu, 7 Jul 2022 21:21:58 +0000 (23:21 +0200)]
soc: qcom: Make QCOM_RPMPD depend on PM
QCOM_RPMPD requires PM_GENERIC_DOMAINS/_OF, which in turns requires
CONFIG_PM. I forgot about the latter in my earlier patch (it's still
in -next as of the time of committing, hence no Fixes: tag). Fix it.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220707212158.32684-1-konrad.dybcio@somainline.org
Arnd Bergmann [Tue, 12 Jul 2022 21:01:24 +0000 (23:01 +0200)]
Merge tag 'qcom-drivers-for-5.20' of git://git./linux/kernel/git/qcom/linux into arm/drivers
Qualcomm driver updates for v5.20
This introduces a new driver that requests interconnect bandwidth based
on throughput measurements of the bwmon hardware blocks found associated
with, among other things, the CPU subsystem on many Qualcomm platforms.
It introduces support for the SCM wrapper driver to vote for
interconnect bandwidth for operations that needs bandwidth to the crypto
engine. This ensures both performance and guards against issues caused
by lacking votes for this path.
The socinfo driver gains knowledge about the SC7180P SoC.
It contains a range of fixes for spelling mistakes, refcount leaks in
various drivers and removes some redundant code from the apr remove
path.
The SCM DT bindings are updated to declare support for QCS404, SM6125
and SDX65.
The command db driver has a strncpy() converted to strscpy_pad() and
then back again with proper documentation to why this was the right API.
* tag 'qcom-drivers-for-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
soc: qcom: icc-bwmon: Add bandwidth monitoring driver
dt-bindings: interconnect: qcom,msm8998-cpu-bwmon: add BWMON device
soc/qcom: Make QCOM_RPMPD select PM_GENERIC_DOMAINS/_OF
soc: qcom: aoss: Fix refcount leak in qmp_cooling_devices_register
soc: qcom: llcc: Fix syntax errors in comments
soc: qcom: ocmem: Fix refcount leak in of_get_ocmem
dt-bindings: soc: qcom,wcnss: remove unneeded ref for names
firmware: qcom_scm: Add bw voting support to the SCM interface
dt-bindings: firmware: qcom-scm: Add interconnects property
soc: qcom: cmd-db: replace strscpy_pad() with strncpy()
dt-bindings: firmware: scm: Add compatible for SDX65
dt-bindings: arm: qcom: switch maintainer to Bjorn
soc: qcom: rpmhpd: fix typos in comment
soc: qcom: correct kerneldoc
soc: qcom: cmd-db: replace strncpy() with strscpy_pad()
firmware: qcom_scm-legacy: correct kerneldoc
dt-bindings: firmware: document Qualcomm QCS404 and SM6125 SCM
soc: qcom: apr: Drop redundant check in .remove()
firmware: qcom_scm: drop unexpected word "the"
soc: qcom: socinfo: Add an ID for sc7180P
Link: https://lore.kernel.org/r/20220712021830.1271398-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Tue, 12 Jul 2022 20:59:08 +0000 (22:59 +0200)]
Merge tag 'arm-soc/for-5.20/drivers' of https://github.com/Broadcom/stblinux into arm/drivers
This pull request contains Broadcom SoC drivers updatse for 5.20, please
pull the following:
- Julia fixes a typo in the Broadcom STB legacy power management code
- Liang fixes a device_node reference count leak in the Broadcom STB BIU
driver code error path(s)
- Nicolas and Stefan provide updates to the BCM2835 power management
driver allowing its use on BCM2711 (Raspberry Pi 4) and to enable the
use of the V3D GPU driver on such platforms. This is a merge of an
immutable branch from Lee Jones' MFD tree
- William removes the use of CONFIG_ARCH_BCM_63XX which is removed and
replaces the dependencies with CONFIG_ARCH_BCMBCA which is how all of
the DSL/PON SoCs from Broadcom are now supported in the upstream
kernel.
* tag 'arm-soc/for-5.20/drivers' of https://github.com/Broadcom/stblinux:
tty: serial: bcm63xx: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
spi: bcm63xx-hsspi: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
clk: bcm: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
hwrng: bcm2835: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
phy: brcm-sata: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
i2c: brcmstb: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
ata: ahci_brcm: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
soc: bcm: bcm2835-power: Bypass power_on/off() calls
soc: bcm: bcm2835-power: Add support for BCM2711's RPiVid ASB
soc: bcm: bcm2835-power: Resolve ASB register macros
soc: bcm: bcm2835-power: Refactor ASB control
mfd: bcm2835-pm: Add support for BCM2711
mfd: bcm2835-pm: Use 'reg-names' to get resources
soc: bcm: brcmstb: biuctrl: Add missing of_node_put()
soc: bcm: brcmstb: pm: pm-arm: fix typo in comment
Link: https://lore.kernel.org/r/20220711164451.3542127-6-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Tue, 12 Jul 2022 20:56:11 +0000 (22:56 +0200)]
Merge tag 'imx-drivers-5.20' of git://git./linux/kernel/git/shawnguo/linux into arm/drivers
i.MX drivers change for 5.20:
- Update imx8m-blk-ctrl driver to print the name of the power domain,
so that the error message becomes more useful.
- Update the error messages in gpcv2 driver by printing the reason why
a regulator fails to be enabled or disabled.
- A series from Michael Walle to convert the guts driver from a platform
driver to an core_initcall for getting rid of all those global static
variables.
- A couple of follow-up fixes on guts driver series.
* tag 'imx-drivers-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
soc: fsl: guts: check return value after calling of_iomap() in fsl_guts_get_soc_uid()
soc: fsl: guts: fix return value check in fsl_guts_init()
soc: imx: imx8m-blk-ctrl: Make error prints useful
soc: fsl: guts: add serial_number support
soc: fsl: guts: drop platform driver
soc: fsl: guts: use of_root instead of own reference
soc: fsl: guts: allocate soc_dev_attr on the heap
soc: fsl: guts: embed fsl_guts_get_svr() in probe()
soc: fsl: guts: remove module_exit() and fsl_guts_remove()
soc: fsl: guts: machine variable might be unset
soc: imx: gpcv2: print errno for regulator errors
Link: https://lore.kernel.org/r/20220709082951.15123-1-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Tue, 12 Jul 2022 20:55:05 +0000 (22:55 +0200)]
Merge tag 'ti-driver-soc-for-v5.20' of git://git./linux/kernel/git/ti/linux into arm/drivers
TI Driver updates for v5.20
* pruss: Enable support for AM62, bindings cleanups
* wkup_m3_ipc: cosmetic cleanup
* tag 'ti-driver-soc-for-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/ti/linux:
soc: ti: pruss: Enable support for PRUSS-M subsystem on K3 AM62x SoCs
dt-bindings: soc: ti: pruss: Update bindings for K3 AM62x SoCs
dt-bindings: soc: ti: pruss: Re-arrange "compatible" in alphabetic order
soc: ti: wkup_m3_ipc: Remove unneeded semicolon
Link: https://lore.kernel.org/r/20220708232655.reqjdbib52ejdja4@unadvised
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Tue, 12 Jul 2022 20:53:08 +0000 (22:53 +0200)]
Merge tag 'tegra-for-5.20-memory' of git://git./linux/kernel/git/tegra/linux into arm/drivers
memory: tegra: Changes for v5.20-rc1
Add memory client definitions for the Multi-Gigabit Ethernet (MGBE)
controllers found on Tegra234.
* tag 'tegra-for-5.20-memory' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
memory: tegra: Add MGBE memory clients for Tegra234
dt-bindings: arm: tegra: Add NVIDIA Tegra234 CBB 2.0 binding
dt-bindings: arm: tegra: Add NVIDIA Tegra194 AXI2APB binding
dt-bindings: arm: tegra: Add NVIDIA Tegra194 CBB 1.0 binding
dt-bindings: memory: Add Tegra234 MGBE memory clients
dt-bindings: Add Tegra234 MGBE clocks and resets
dt-bindings: power: Add Tegra234 MGBE power domains
dt-bindings: Add headers for Tegra234 GPCDMA
Link: https://lore.kernel.org/r/20220708185608.676474-5-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Tue, 12 Jul 2022 20:52:21 +0000 (22:52 +0200)]
Merge tag 'tegra-for-5.20-firmware' of git://git./linux/kernel/git/tegra/linux into arm/drivers
firmware: tegra: Changes for v5.20-rc1
Contains a fix that avoids unaligned accesses to IPC memory, which in
turn helps in suppressing speculative reads from out-of-bounds memory.
Another patch performs some minor cleanup around debugfs API usage.
* tag 'tegra-for-5.20-firmware' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
firmware: tegra: Fix error check return value of debugfs_create_file()
firmware: tegra: bpmp: Do only aligned access to IPC memory area
Link: https://lore.kernel.org/r/20220708185608.676474-3-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Tue, 12 Jul 2022 13:01:30 +0000 (15:01 +0200)]
Merge tag 'v5.19-next-soc' of git://git./linux/kernel/git/matthias.bgg/linux into arm/drivers
pmic wrapper:
- code style improvements
devapc:
- add support for MT8186
Smart Voltage Scaling (SVS)
- add support for MT8183 and MT8192
MMSYS:
- Add more display paths for MT8365
Mutex:
- Add common interface for MOD and SOF table
- Add support for MDP on MT8183
- Move binding to soc folder
- Add support to use CMDQ to enable the mutex, needed by MDP3
Power domains:
- Add support for MT6795
* tag 'v5.19-next-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: (29 commits)
soc: mediatek: mutex: Simplify with devm_platform_get_and_ioremap_resource()
soc: mediatek: pm-domains: Add support for Helio X10 MT6795
dt-bindings: power: Add MediaTek Helio X10 MT6795 power domains
soc: mediatek: SVS: Use DEFINE_SIMPLE_DEV_PM_OPS for svs_pm_ops
soc: mediatek: mtk-pm-domains: Allow probing vreg supply on two MFGs
soc: mediatek: fix missing clk_disable_unprepare() on err in svs_resume()
soc: mediatek: mutex: Use DDP_COMPONENT_DITHER0 mod index for MT8365
soc: mediatek: mutex: add functions that operate registers by CMDQ
dt-bindings: soc: mediatek: add gce-client-reg for MUTEX
dt-bindings: soc: mediatek: move out common module from display folder
soc: mediatek: mutex: add 8183 MUTEX MOD settings for MDP
soc: mediatek: mutex: add common interface for modules setting
soc: mediatek: pm-domains: Add support always on flag
soc: mediatek: mt8365-mmsys: add DPI/HDMI display path
soc: mediatek: mutex: add MT8365 support
soc: mediatek: SVS: add mt8192 SVS GPU driver
dt-bindings: soc: mediatek: add mt8192 svs dt-bindings
soc: mediatek: SVS: add debug commands
soc: mediatek: SVS: add monitor mode
soc: mediatek: SVS: introduce MTK SVS engine
...
Link: https://lore.kernel.org/r/b733bd82-6d99-23ef-0541-98e98eb8d3bc@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Tue, 12 Jul 2022 13:00:27 +0000 (15:00 +0200)]
Merge tag 'sunxi-drivers-for-5.20-1' of git://git./linux/kernel/git/sunxi/linux into arm/drivers
- build mbus driver only for ARM/ARM64
* tag 'sunxi-drivers-for-5.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
soc: sunxi: mbus: Only build the driver on ARM/ARM64
Link: https://lore.kernel.org/r/YshfPux1c2x9S7Fi@kista.localdomain
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
William Zhang [Thu, 7 Jul 2022 06:57:59 +0000 (23:57 -0700)]
tty: serial: bcm63xx: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
Prepare for the BCM63138 ARCH_BCM_63XX migration to ARCH_BCMBCA. Make
SERIAL_BCM63XX depending on ARCH_BCMBCA.
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
William Zhang [Thu, 7 Jul 2022 06:57:58 +0000 (23:57 -0700)]
spi: bcm63xx-hsspi: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
Prepare for the BCM63138 ARCH_BCM_63XX migration to ARCH_BCMBCA. Make
SPI_BCM63XX_HSSPI depending on ARCH_BCMBCA.
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
William Zhang [Thu, 7 Jul 2022 06:57:55 +0000 (23:57 -0700)]
clk: bcm: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
Prepare for the BCM63138 ARCH_BCM_63XX migration to ARCH_BCMBCA. Make
CLK_BCM_63XX depending and setting default on ARCH_BCMBCA.
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
William Zhang [Thu, 7 Jul 2022 06:57:54 +0000 (23:57 -0700)]
hwrng: bcm2835: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
Prepare for the BCM63138 ARCH_BCM_63XX migration to ARCH_BCMBCA. Make
HW_RANDOM_BCM2835 depending on ARCH_BCMBCA.
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
William Zhang [Thu, 7 Jul 2022 06:57:57 +0000 (23:57 -0700)]
phy: brcm-sata: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
Prepare for the BCM63138 ARCH_BCM_63XX migration to ARCH_BCMBCA. Make
PHY_BRCM_SATA depending on ARCH_BCMBCA.
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
William Zhang [Thu, 7 Jul 2022 06:57:56 +0000 (23:57 -0700)]
i2c: brcmstb: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
Prepare for the BCM63138 ARCH_BCM_63XX migration to ARCH_BCMBCA. Make
I2C_BRCMSTB depending on ARCH_BCMBCA.
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Acked-by: Wolfram Sang <wsa@kernel.org>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
William Zhang [Thu, 7 Jul 2022 06:57:53 +0000 (23:57 -0700)]
ata: ahci_brcm: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
Prepare for the BCM63138 ARCH_BCM_63XX migration to ARCH_BCMBCA. Make
AHCI_BRCM depending on ARCH_BCMBCA.
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Lv Ruyi [Tue, 19 Apr 2022 01:36:48 +0000 (01:36 +0000)]
firmware: tegra: Fix error check return value of debugfs_create_file()
If an error occurs, debugfs_create_file() will return ERR_PTR(-ERROR),
so use IS_ERR() to check it.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Thierry Reding [Wed, 6 Jul 2022 03:12:54 +0000 (08:42 +0530)]
memory: tegra: Add MGBE memory clients for Tegra234
Tegra234 has multiple network interfaces with each their own memory
clients and stream IDs to allow for proper isolation.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Bhadram Varka <vbhadram@nvidia.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Thierry Reding [Fri, 8 Jul 2022 08:29:20 +0000 (10:29 +0200)]
Merge branch 'for-5.20/dt-bindings' into for-5.20/memory
AngeloGioacchino Del Regno [Thu, 23 Jun 2022 12:17:01 +0000 (14:17 +0200)]
soc: mediatek: mutex: Simplify with devm_platform_get_and_ioremap_resource()
Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
While at it, also remove a redundant call to of_address_to_resource(),
as this was getting the address of the same resource index 0: we can
as well get the iostart from the 'regs' pointer.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220623121701.107512-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
AngeloGioacchino Del Regno [Tue, 3 May 2022 14:14:41 +0000 (16:14 +0200)]
soc: mediatek: pm-domains: Add support for Helio X10 MT6795
Add pm-domains (mtcmos) data for MediaTek Helio X10 MT6795 SoC.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220503141441.125852-3-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
AngeloGioacchino Del Regno [Tue, 3 May 2022 14:14:40 +0000 (16:14 +0200)]
dt-bindings: power: Add MediaTek Helio X10 MT6795 power domains
Add power domains dt-bindings for MediaTek Helio X10 (MT6795).
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220503141441.125852-2-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Sumit Gupta [Wed, 11 May 2022 20:16:48 +0000 (01:46 +0530)]
dt-bindings: arm: tegra: Add NVIDIA Tegra234 CBB 2.0 binding
Add device-tree binding documentation to represent the Control Backbone
(CBB) version 2.0 used on Tegra234 SoCs.
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Sumit Gupta [Wed, 11 May 2022 20:16:45 +0000 (01:46 +0530)]
dt-bindings: arm: tegra: Add NVIDIA Tegra194 AXI2APB binding
Add device-tree binding documentation to represent the AXI2APB bridges
used by Control Backbone (CBB) 1.0 on Tegra194 SoCs. All errors for APB
slaves are reported as slave error because APB bas single bit to report
error. So, CBB driver needs to further check error status registers of
all the AXI2APB bridges to find error type.
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Sumit Gupta [Wed, 11 May 2022 20:16:44 +0000 (01:46 +0530)]
dt-bindings: arm: tegra: Add NVIDIA Tegra194 CBB 1.0 binding
Add device-tree binding documentation to represent the Control Backbone
(CBB) version 1.0 used on Tegra194 SoCs.
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Thierry Reding [Wed, 6 Jul 2022 03:12:53 +0000 (08:42 +0530)]
dt-bindings: memory: Add Tegra234 MGBE memory clients
Add the memory client and stream ID definitions for the MGBE hardware
found on Tegra234 SoCs.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Bhadram Varka <vbhadram@nvidia.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Thierry Reding [Wed, 6 Jul 2022 03:12:52 +0000 (08:42 +0530)]
dt-bindings: Add Tegra234 MGBE clocks and resets
Add the clocks and resets used by the MGBE Ethernet hardware found on
Tegra234 SoCs.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Bhadram Varka <vbhadram@nvidia.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Thierry Reding [Wed, 6 Jul 2022 03:12:51 +0000 (08:42 +0530)]
dt-bindings: power: Add Tegra234 MGBE power domains
Add power domain IDs for the four MGBE power partitions found on
Tegra234.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Bhadram Varka <vbhadram@nvidia.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Nathan Chancellor [Wed, 22 Jun 2022 17:56:49 +0000 (10:56 -0700)]
soc: mediatek: SVS: Use DEFINE_SIMPLE_DEV_PM_OPS for svs_pm_ops
When building this driver for an architecture that does not support
CONFIG_PM_SLEEP, such as hexagon, the following warnings occur:
drivers/soc/mediatek/mtk-svs.c:1481:12: error: unused function 'svs_suspend' [-Werror,-Wunused-function]
static int svs_suspend(struct device *dev)
^
drivers/soc/mediatek/mtk-svs.c:1515:12: error: unused function 'svs_resume' [-Werror,-Wunused-function]
static int svs_resume(struct device *dev)
^
2 errors generated.
This happens because SIMPLE_DEV_PM_OPS uses SET_SYSTEM_SLEEP_PM_OPS,
which evaluates to nothing when CONFIG_PM_SLEEP is not set, leaving the
functions unused in the eyes of the compiler.
This problem was rectified in commit
1a3c7bb08826 ("PM: core: Add new
*_PM_OPS macros, deprecate old ones") with new macros. Use
DEFINE_SIMPLE_DEV_PM_OPS to fix the warning while not changing
svs_pm_ops when CONFIG_PM_SLEEP is set.
Fixes:
681a02e95000 ("soc: mediatek: SVS: introduce MTK SVS engine")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20220622175649.1856337-1-nathan@kernel.org
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
AngeloGioacchino Del Regno [Thu, 23 Jun 2022 12:38:49 +0000 (14:38 +0200)]
soc: mediatek: mtk-pm-domains: Allow probing vreg supply on two MFGs
MediaTek SoCs have multiple MFG power-domains, exclusively used for
the GPU which, in turn, requires external power supplies: make sure
to have the MTK_SCPD_DOMAIN_SUPPLY cap on the two topmost MFGs to
allow voting for regulators on/off upon usage of these power domains.
This also ensures that the SRAM is actually powered and that we're
not relying on the bootloader leaving this supply on when performing
the first (and latter) poweron sequence for these domains' sram.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220623123850.110225-2-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Kishon Vijay Abraham I [Thu, 2 Jun 2022 12:06:13 +0000 (17:36 +0530)]
soc: ti: pruss: Enable support for PRUSS-M subsystem on K3 AM62x SoCs
The K3 AM62x family of SoC has one PRUSS-M instance and it has two
Programmable Real-Time Units (PRU0 and PRU1). This does not support
Industrial Communications Subsystem features like Ethernet.
The existing pruss platform driver has been updated to support this
through a new AM62x specific compatible.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20220602120613.2175-4-kishon@ti.com
Kishon Vijay Abraham I [Thu, 2 Jun 2022 12:06:12 +0000 (17:36 +0530)]
dt-bindings: soc: ti: pruss: Update bindings for K3 AM62x SoCs
Update the PRUSS bindings for the PRUSSM instance present in
AM625 SoC.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220602120613.2175-3-kishon@ti.com
Kishon Vijay Abraham I [Thu, 2 Jun 2022 12:06:11 +0000 (17:36 +0530)]
dt-bindings: soc: ti: pruss: Re-arrange "compatible" in alphabetic order
Re-arrange "compatible" string in alphabetic order to decrease the
chance of conflicts.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220602120613.2175-2-kishon@ti.com
Krzysztof Kozlowski [Mon, 4 Jul 2022 12:17:28 +0000 (14:17 +0200)]
soc: qcom: icc-bwmon: Add bandwidth monitoring driver
Bandwidth monitoring (BWMON) sits between various subsytems like CPU,
GPU, Last Level caches and memory subsystem. The BWMON can be
configured to monitor the data throuhput between memory and other
subsytems. The throughput is measured within specified sampling window
and is used to vote for corresponding interconnect bandwidth.
Current implementation brings support for BWMON v4, used for example on
SDM845 to measure bandwidth between CPU (gladiator_noc) and Last Level
Cache (memnoc). Usage of this BWMON allows to remove fixed bandwidth
votes from cpufreq (CPU nodes) thus achieve high memory throughput even
with lower CPU frequencies.
The driver was tested on SDM845.
Co-developed-by: Thara Gopinath <thara.gopinath@gmail.com>
Signed-off-by: Thara Gopinath <thara.gopinath@gmail.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220704121730.127925-3-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Mon, 4 Jul 2022 12:17:27 +0000 (14:17 +0200)]
dt-bindings: interconnect: qcom,msm8998-cpu-bwmon: add BWMON device
Add bindings for the Qualcomm Bandwidth Monitor device providing
performance data on interconnects. The bindings describe only BWMON CPU
(version 4), e.g. the instance which appeared for the first on Qualcomm
MSM8998 SoC and is also used on SDM845. This BWMON device sits between
CPU and Last Level Cache Controller.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220704121730.127925-2-krzysztof.kozlowski@linaro.org
Florian Fainelli [Wed, 6 Jul 2022 16:18:05 +0000 (09:18 -0700)]
Merge tag 'tags/ib-mfd-soc-bcm-v5.20' into drivers/next
Immutable branch between MFD and SoC due for the v5.20 merge window
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Arnd Bergmann [Wed, 6 Jul 2022 11:56:10 +0000 (13:56 +0200)]
Merge tag 'scmi-updates-5.20' of git://git./linux/kernel/git/sudeep.holla/linux into arm/drivers
Arm SCMI updates for v5.20
The main additions this time around are:
1. The capability to trace full SCMI message headers and payloads.
The recent unearthing of chain of old firmware issues motivated
this effort so that it is easier to trace them and debug quicker
than it took this time around in absence of such tracing.
2. SCMI System power control driver to handle platform's requests for a
graceful shutdown. Though the system power control protocol has been
around since the begining of SCMI, it lacked the timeout information
that was added in SCMI v3.1 that enables kernel to take appropriate
action within the timeout and doesn't have to rely on any other
user inputs(which was blocking factor for addition of this driver
earlier)
3. Support for SCMI Power Capping protocol that was introduced in SCMI v3.1
This protocol is intended for controlling and monitoring the power
consumption of power capping domains. The firmware also provides the
hierarchy of powercap domains by providing parent domain information.
It also contains a bug fix in the old SCPI driver addressing possible
user-after-free issues.
* tag 'scmi-updates-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: Use fast channel tracing
include: trace: Add SCMI fast channel tracing
firmware: arm_scmi: Add SCMI v3.1 powercap fast channels support
firmware: arm_scmi: Generalize the fast channel support
firmware: arm_scmi: Add SCMI v3.1 powercap protocol basic support
dt-bindings: firmware: arm,scmi: Add support for powercap protocol
firmware: arm_scmi: Add SCMI System Power Control driver
firmware: arm_scmi: Add devm_protocol_acquire helper
firmware: arm_scmi: Add SCMI v3.1 System Power extensions
firmware: arm_scmi: Support only one single system power device
firmware: arm_scmi: Use new SCMI full message tracing
include: trace: Add SCMI full message tracing
firmware: arm_scpi: Ensure scpi_info is not assigned if the probe fails
firmware: arm_scmi: Remove usage of the deprecated ida_simple_xxx API
firmware: arm_scmi: Fix response size warning for OPTEE transport
firmware: arm_scmi: Relax CLOCK_DESCRIBE_RATES out-of-spec checks
Link: https://lore.kernel.org/r/20220706115045.2272678-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Samuel Holland [Sat, 2 Jul 2022 03:25:20 +0000 (22:25 -0500)]
soc: sunxi: mbus: Only build the driver on ARM/ARM64
This driver exists as a workaround for old devicetrees which are missing
interconnects properties, so it is only useful for those specific
platforms, which all happen to be ARM or ARM64.
This solves the issue that the driver fails to build on RISC-V, where
PHYS_OFFSET is not defined.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220702032520.22129-1-samuel@sholland.org
Konrad Dybcio [Fri, 1 Jul 2022 07:37:00 +0000 (09:37 +0200)]
soc/qcom: Make QCOM_RPMPD select PM_GENERIC_DOMAINS/_OF
The driver uses generic genpd OF APIs and with a very minimal config
where nothing else selects them, this driver will not probe, as
of_genpd_add_provider_onecell will return -EOPNOTSUPP.
Make sure to select these in Kconfig to prevent that.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220701073700.17124-1-konrad.dybcio@somainline.org
Yang Yingliang [Tue, 28 Jun 2022 14:02:49 +0000 (22:02 +0800)]
soc: fsl: guts: check return value after calling of_iomap() in fsl_guts_get_soc_uid()
of_iomap() may return NULL, so we need check the return value.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Michael Walle <michael@walle.cc>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Yang Yingliang [Tue, 28 Jun 2022 14:02:48 +0000 (22:02 +0800)]
soc: fsl: guts: fix return value check in fsl_guts_init()
In case of error, of_iomap() returns NULL pointer not ERR_PTR().
The IS_ERR() test in the return value check should be replaced
with NULL test and return -ENOMEM as error value.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Michael Walle <michael@walle.cc>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Cristian Marussi [Mon, 4 Jul 2022 10:22:40 +0000 (11:22 +0100)]
firmware: arm_scmi: Use fast channel tracing
Make use of SCMI fast channel event tracing.
Link: https://lore.kernel.org/r/20220704102241.2988447-7-cristian.marussi@arm.com
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Cristian Marussi [Mon, 4 Jul 2022 10:22:39 +0000 (11:22 +0100)]
include: trace: Add SCMI fast channel tracing
All the currently defined SCMI events are meant to trace only regular SCMI
transfers based on SCMI messages exchanges; SCMI transactions based on
fast channels, where used, are completely invisible from the tracing point
of view.
Add support to trace fast channel transactions; while doing that avoid
exposing full shared memory location addresses.
Link: https://lore.kernel.org/r/20220704102241.2988447-6-cristian.marussi@arm.com
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Cristian Marussi [Mon, 4 Jul 2022 10:22:38 +0000 (11:22 +0100)]
firmware: arm_scmi: Add SCMI v3.1 powercap fast channels support
Add SCMIv3.1 powercap protocol fast channel support using common helpers
provided by the SCMI core with scmi_proto_helpers_ops operations.
Link: https://lore.kernel.org/r/20220704102241.2988447-5-cristian.marussi@arm.com
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Cristian Marussi [Mon, 4 Jul 2022 10:22:37 +0000 (11:22 +0100)]
firmware: arm_scmi: Generalize the fast channel support
Generalize existing fast channel support used in the perf protocol and
make it available to possibly any protocol refactoring the common code
into a couple of new scmi_proto_helpers_ops routines.
Make perf protocol use this new infrastructure.
No functional change.
Link: https://lore.kernel.org/r/20220704102241.2988447-4-cristian.marussi@arm.com
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Cristian Marussi [Mon, 4 Jul 2022 10:22:36 +0000 (11:22 +0100)]
firmware: arm_scmi: Add SCMI v3.1 powercap protocol basic support
Add support for SCMI v3.1 powercap protocol, with the exception of powercap
fast channels, exposing all the new related powercap protocol operations as
usual in include/linux/scmi_protocol.h.
Link: https://lore.kernel.org/r/20220704102241.2988447-3-cristian.marussi@arm.com
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Cristian Marussi [Mon, 4 Jul 2022 10:22:35 +0000 (11:22 +0100)]
dt-bindings: firmware: arm,scmi: Add support for powercap protocol
Add new SCMI v3.1 powercap protocol bindings definitions and example.
Link: https://lore.kernel.org/r/20220704102241.2988447-2-cristian.marussi@arm.com
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Cristian Marussi [Mon, 4 Jul 2022 10:19:33 +0000 (11:19 +0100)]
firmware: arm_scmi: Add SCMI System Power Control driver
Add an SCMI System Power control driver to handle platform's requests
carried by SYSTEM_POWER_STATE_NOTIFIER notifications: such platform
requested system-wide power state transitions are handled accordingly,
gracefully or forcefully, depending on the notifications' message flags.
Graceful requests are relayed to userspace using the same Kernel API used
to handle ACPI Shutdown bus events.
Link: https://lore.kernel.org/r/20220704101933.2981635-5-cristian.marussi@arm.com
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Cristian Marussi [Mon, 4 Jul 2022 10:19:32 +0000 (11:19 +0100)]
firmware: arm_scmi: Add devm_protocol_acquire helper
Add a method to get hold of a protocol, causing it to be initialized and
its resource accounting updated, without getting access to its operations
and handle.
Some protocols, like SCMI SystemPower, do not expose any protocol ops to
the kernel OSPM agent but still need to be at least initialized. This
helper avoids the need to invoke a full devm_get_protocol() only to get
the protocol initialized while throwing away unused the protocol ops and
handle.
Link: https://lore.kernel.org/r/20220704101933.2981635-4-cristian.marussi@arm.com
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Cristian Marussi [Mon, 4 Jul 2022 10:19:31 +0000 (11:19 +0100)]
firmware: arm_scmi: Add SCMI v3.1 System Power extensions
Add support for SCMIv3.1 System Power optional timeout field while
dispatching SYSTEM_POWER_STATE_NOTIFIER notification.
Link: https://lore.kernel.org/r/20220704101933.2981635-3-cristian.marussi@arm.com
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Cristian Marussi [Mon, 4 Jul 2022 10:19:30 +0000 (11:19 +0100)]
firmware: arm_scmi: Support only one single system power device
In order to minimize SCMI platform fw-side complexity, only one single SCMI
platform should be in charge of SCMI SystemPower protocol communications
with the OSPM. Enforce the existence of one single unique device associated
with SystemPower protocol across any possible number of SCMI platforms, and
warn if a system tries to register different SystemPower devices from
multiple platforms.
Link: https://lore.kernel.org/r/20220704101933.2981635-2-cristian.marussi@arm.com
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Cristian Marussi [Thu, 30 Jun 2022 17:31:35 +0000 (18:31 +0100)]
firmware: arm_scmi: Use new SCMI full message tracing
Add full message tracing for all transmitted and successfully received SCMI
commands, replies and notifications.
Link: https://lore.kernel.org/r/20220630173135.2086631-3-cristian.marussi@arm.com
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Cristian Marussi [Thu, 30 Jun 2022 17:31:34 +0000 (18:31 +0100)]
include: trace: Add SCMI full message tracing
Add a distinct trace event to dump full SCMI message headers and payloads.
Link: https://lore.kernel.org/r/20220630173135.2086631-2-cristian.marussi@arm.com
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Sudeep Holla [Fri, 1 Jul 2022 16:03:10 +0000 (17:03 +0100)]
firmware: arm_scpi: Ensure scpi_info is not assigned if the probe fails
When scpi probe fails, at any point, we need to ensure that the scpi_info
is not set and will remain NULL until the probe succeeds. If it is not
taken care, then it could result use-after-free as the value is exported
via get_scpi_ops() and could refer to a memory allocated via devm_kzalloc()
but freed when the probe fails.
Link: https://lore.kernel.org/r/20220701160310.148344-1-sudeep.holla@arm.com
Cc: stable@vger.kernel.org # 4.19+
Reported-by: huhai <huhai@kylinos.cn>
Reviewed-by: Jackie Liu <liuyun01@kylinos.cn>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Nicolas Saenz Julienne [Sat, 25 Jun 2022 11:36:19 +0000 (13:36 +0200)]
soc: bcm: bcm2835-power: Bypass power_on/off() calls
Bypass power_on/power_off() when running on BCM2711 as they are not
needed.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220625113619.15944-12-stefan.wahren@i2se.com
Stefan Wahren [Sat, 25 Jun 2022 11:36:18 +0000 (13:36 +0200)]
soc: bcm: bcm2835-power: Add support for BCM2711's RPiVid ASB
In BCM2711 the new RPiVid ASB took over V3D. The old ASB is still present
with the ISP and H264 bits, and V3D is in the same place in the new ASB
as the old one.
Use the fact that 'pm->rpivid_asb' is populated as a hint that we're on
BCM2711.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220625113619.15944-11-stefan.wahren@i2se.com
Stefan Wahren [Sat, 25 Jun 2022 11:36:17 +0000 (13:36 +0200)]
soc: bcm: bcm2835-power: Resolve ASB register macros
The macros in order to access the ASB registers have a hard coded base
address. So extending them for other platforms would make them harder
to read. As a solution resolve these macros.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220625113619.15944-10-stefan.wahren@i2se.com
Stefan Wahren [Sat, 25 Jun 2022 11:36:16 +0000 (13:36 +0200)]
soc: bcm: bcm2835-power: Refactor ASB control
The functions to control the async AXI bridges are almost identical.
So define a general function to handle it and keep the original ones as
wrapper. This should make this driver easier to extend.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220625113619.15944-9-stefan.wahren@i2se.com
Stefan Wahren [Sat, 25 Jun 2022 11:36:15 +0000 (13:36 +0200)]
mfd: bcm2835-pm: Add support for BCM2711
In BCM2711 the new RPiVid ASB took over V3D. The old ASB is still present
with the ISP and H264 bits, and V3D is in the same place in the new ASB
as the old one.
As per the devicetree bindings, BCM2711 will provide both the old and
new ASB resources, so get both of them and pass them into
'bcm2835-power,' which will take care of selecting which one to use
accordingly.
Since the RPiVid ASB's resources were being provided prior to formalizing
the bindings[1], also support the old DT files that didn't use
'reg-names.'
[1] See:
7dbe8c62ceeb ("ARM: dts: Add minimal Raspberry Pi 4 support")
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220625113619.15944-8-stefan.wahren@i2se.com
Nicolas Saenz Julienne [Sat, 25 Jun 2022 11:36:14 +0000 (13:36 +0200)]
mfd: bcm2835-pm: Use 'reg-names' to get resources
If available in firmware, find resources by their 'reg-names' position
instead of relying on hardcoded offsets. Care is taken to support old
firmware nonetheless.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220625113619.15944-7-stefan.wahren@i2se.com
Arnd Bergmann [Fri, 1 Jul 2022 20:56:38 +0000 (22:56 +0200)]
Merge tag 'memory-controller-drv-5.20' of git://git./linux/kernel/git/krzk/linux-mem-ctrl into arm/drivers
Memory controller drivers for v5.20
Add MediaTek MT6795 Helio X10 SMI support.
* tag 'memory-controller-drv-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl:
memory: mtk-smi: Add support for MT6795 Helio X10
dt-bindings: memory: mtk-smi: Add MT6795 Helio X10 bindings
Link: https://lore.kernel.org/r/20220624081828.33649-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Fri, 1 Jul 2022 20:22:56 +0000 (22:22 +0200)]
Merge tag 'amlogic-drivers-for-v5.20' of git://git./linux/kernel/git/amlogic/linux into arm/drivers
Amlogic Drivers changes for v5.20:
- Fix refcount leak in meson-secure-pwrc.c
- Fix refcount leak in meson_mx_socinfo_init
* tag 'amlogic-drivers-for-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux:
soc: amlogic: Fix refcount leak in meson-secure-pwrc.c
meson-mx-socinfo: Fix refcount leak in meson_mx_socinfo_init
Link: https://lore.kernel.org/r/0c01e173-9abf-69ac-7882-e6ecc3935c33@baylibre.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Fri, 1 Jul 2022 20:21:30 +0000 (22:21 +0200)]
Merge tag 'renesas-drivers-for-v5.20-tag1' of git://git./linux/kernel/git/geert/renesas-devel into arm/drivers
Renesas driver updates for v5.20
- Small fixes and improvements.
* tag 'renesas-drivers-for-v5.20-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
soc: renesas: rcar-sysc: Optimize rcar_sysc_area struct sizes
soc: renesas: r8a779a0-sysc: Fix A2DP1 and A2CV[2357] PDR values
Link: https://lore.kernel.org/r/cover.1656069638.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Miaoqian Lin [Mon, 6 Jun 2022 06:42:52 +0000 (10:42 +0400)]
soc: qcom: aoss: Fix refcount leak in qmp_cooling_devices_register
Every iteration of for_each_available_child_of_node() decrements
the reference count of the previous node.
When breaking early from a for_each_available_child_of_node() loop,
we need to explicitly call of_node_put() on the child node.
Add missing of_node_put() to avoid refcount leak.
Fixes:
05589b30b21a ("soc: qcom: Extend AOSS QMP driver to support resources that are used to wake up the SoC.")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220606064252.42595-1-linmq006@gmail.com
Xiang wangx [Sat, 4 Jun 2022 14:23:27 +0000 (22:23 +0800)]
soc: qcom: llcc: Fix syntax errors in comments
Delete the redundant word 'and'.
Signed-off-by: Xiang wangx <wangxiang@cdjrlc.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220604142327.14714-1-wangxiang@cdjrlc.com
Miaoqian Lin [Thu, 2 Jun 2022 04:24:30 +0000 (08:24 +0400)]
soc: qcom: ocmem: Fix refcount leak in of_get_ocmem
of_parse_phandle() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
Add missing of_node_put() to avoid refcount leak.
of_node_put() will check NULL pointer.
Fixes:
88c1e9404f1d ("soc: qcom: add OCMEM driver")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220602042430.1114-1-linmq006@gmail.com
Krzysztof Kozlowski [Tue, 17 May 2022 07:01:02 +0000 (09:01 +0200)]
dt-bindings: soc: qcom,wcnss: remove unneeded ref for names
The core schema already sets a 'ref' for properties ending with 'names'.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220517070113.18023-2-krzysztof.kozlowski@linaro.org
Sibi Sankar [Mon, 23 May 2022 07:00:57 +0000 (12:30 +0530)]
firmware: qcom_scm: Add bw voting support to the SCM interface
The SMC calls required by remoteproc PAS driver on SM8450 SoCs get a
performance benefit from having a max vote to the crypto->ddr path.
Add support for bandwidth (bw) voting for those SMC calls when the
interconnects property is specified.
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1653289258-17699-3-git-send-email-quic_sibis@quicinc.com
Sibi Sankar [Mon, 23 May 2022 07:00:56 +0000 (12:30 +0530)]
dt-bindings: firmware: qcom-scm: Add interconnects property
Add interconnects as an optional property for SM8450 SoCs.
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1653289258-17699-2-git-send-email-quic_sibis@quicinc.com
Douglas Anderson [Tue, 28 Jun 2022 13:43:13 +0000 (06:43 -0700)]
soc: qcom: cmd-db: replace strscpy_pad() with strncpy()
Commit
ac0126a01735 ("soc: qcom: cmd-db: replace strncpy() with
strscpy_pad()") breaks booting on my sc7280-herobrine-herobrine
device. From printouts I see that at bootup the function is called
with an id of "lnbclka2" which is 8 bytes big.
Previously all 8 bytes of this string were copied to the
destination. Now only 7 bytes will be copied since strscpy_pad() saves
a byte for '\0' termination.
We don't need the '\0' termination in the destination. Let's go back
to strncpy(). According to the warning:
If a caller is using non-NUL-terminated strings, strncpy() can still
be used, but destinations should be marked with the __nonstring
attribute to avoid future compiler warnings.
...so we'll do that.
While we're at it, let's change the query array to use
"sizeof(ent->id)" so it can't possibly go out of sync with our later
copy.
Fixes:
ac0126a01735 ("soc: qcom: cmd-db: replace strncpy() with strscpy_pad()")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220628064301.v3.1.Ie7b480cd99e2c13319220cbc108caf2bcd41286b@changeid
Rohit Agarwal [Wed, 1 Jun 2022 10:45:05 +0000 (16:15 +0530)]
dt-bindings: firmware: scm: Add compatible for SDX65
Add devicetree compatible for SCM present in SDX65 platform.
Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1654080312-5408-5-git-send-email-quic_rohiagar@quicinc.com
Bo Liu [Thu, 16 Jun 2022 05:50:52 +0000 (01:50 -0400)]
firmware: arm_scmi: Remove usage of the deprecated ida_simple_xxx API
Replace the deprecated ida_simple_{get,remove} with ida_{alloc,free}.
Link: https://lore.kernel.org/r/20220616055052.4559-1-liubo03@inspur.com
Signed-off-by: Bo Liu <liubo03@inspur.com>
[sudeep.holla: Replace ida_alloc_min with ida_alloc as suggested by Cristian]
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Vincent Guittot [Fri, 24 Jun 2022 07:45:49 +0000 (09:45 +0200)]
firmware: arm_scmi: Fix response size warning for OPTEE transport
Some protocols check the response size with the expected value but optee
shared memory doesn't return such size whereas it is available in the
optee output buffer.
As an example, the base protocol compares the response size with the
expected result when requesting the list of protocol which triggers a
warning with optee shared memory:
arm-scmi firmware:scmi0: Malformed reply - real_sz:116 calc_sz:4 (loop_num_ret:4)
Save the output buffer length and use it when fetching the answer.
Link: https://lore.kernel.org/r/20220624074549.3298-1-vincent.guittot@linaro.org
Reviewed-by: Etienne Carriere <etienne.carriere@linaro.org>
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Marek Vasut [Fri, 24 Jun 2022 18:29:39 +0000 (20:29 +0200)]
soc: imx: imx8m-blk-ctrl: Make error prints useful
Print the name of the power domain which failed to make the error
prints actually useful for finding the error.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexander Stein <alexander.stein@ew.tq-group.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Martyn Welch <martyn.welch@collabora.com>
Cc: Paul Elder <paul.elder@ideasonboard.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Acked-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Michael Walle [Mon, 4 Apr 2022 09:56:09 +0000 (11:56 +0200)]
soc: fsl: guts: add serial_number support
Most layerscapes provide a security fuse processor where the vendor
will store a unique id per part. Unfortunately, we cannot use the
corresponding efuse driver because this driver needs to be ready
early during the boot phase. To get the unique identifier, we just
need to access two registers. Thus we just search the device tree
for the corresponding device, map its memory to read the id and then
unmap it again.
Because it is likely that the offset within the fuses is dependent
on the SoC, we need a per SoC data. Also, the compatible string is
different among the SoCs. For now, this add support for the LS1028A
SoC.
Signed-off-by: Michael Walle <michael@walle.cc>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Michael Walle [Mon, 4 Apr 2022 09:56:08 +0000 (11:56 +0200)]
soc: fsl: guts: drop platform driver
This driver cannot be unloaded and it will be needed very early in the
boot process because other driver (weakly) depend on it (eg. for chip
errata handling). Drop all the platform driver and devres stuff and
simply make it a core_initcall.
Signed-off-by: Michael Walle <michael@walle.cc>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Michael Walle [Mon, 4 Apr 2022 09:56:07 +0000 (11:56 +0200)]
soc: fsl: guts: use of_root instead of own reference
There is already a global of_root reference. Use that instead of getting
one on our own. We don't need to care about the reference count either
this way.
Signed-off-by: Michael Walle <michael@walle.cc>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Michael Walle [Mon, 4 Apr 2022 09:56:06 +0000 (11:56 +0200)]
soc: fsl: guts: allocate soc_dev_attr on the heap
This is the last global static variable. Drop it and allocate the memory
on the heap instead.
Signed-off-by: Michael Walle <michael@walle.cc>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Michael Walle [Mon, 4 Apr 2022 09:56:05 +0000 (11:56 +0200)]
soc: fsl: guts: embed fsl_guts_get_svr() in probe()
Move the reading of the SVR into the probe function as
fsl_guts_get_svr() is the only user of the static guts variable and this
lets us drop that as well as the malloc() for this variable. Also, we
can unmap the memory region after we accessed it, which will simplify
error handling later.
Signed-off-by: Michael Walle <michael@walle.cc>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Michael Walle [Mon, 4 Apr 2022 09:56:04 +0000 (11:56 +0200)]
soc: fsl: guts: remove module_exit() and fsl_guts_remove()
This driver will never be unloaded. Firstly, it is not available as a
module, but more importantly, other drivers will depend on this one to
apply possible chip errata.
Signed-off-by: Michael Walle <michael@walle.cc>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Michael Walle [Mon, 4 Apr 2022 09:56:03 +0000 (11:56 +0200)]
soc: fsl: guts: machine variable might be unset
If both the model and the compatible properties are missing, then
machine will not be set. Initialize it with NULL.
Fixes:
34c1c21e94ac ("soc: fsl: fix section mismatch build warnings")
Signed-off-by: Michael Walle <michael@walle.cc>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Linus Torvalds [Sun, 26 Jun 2022 21:22:10 +0000 (14:22 -0700)]
Linux 5.19-rc4
Linus Torvalds [Sun, 26 Jun 2022 21:12:56 +0000 (14:12 -0700)]
Merge tag 'soc-fixes-5.19' of git://git./linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"A number of fixes have accumulated, but they are largely for harmless
issues:
- Several OF node leak fixes
- A fix to the Exynos7885 UART clock description
- DTS fixes to prevent boot failures on TI AM64 and J721s2
- Bus probe error handling fixes for Baikal-T1
- A fixup to the way STM32 SoCs use separate dts files for different
firmware stacks
- Multiple code fixes for Arm SCMI firmware, all dealing with
robustness of the implementation
- Multiple NXP i.MX devicetree fixes, addressing incorrect data in DT
nodes
- Three updates to the MAINTAINERS file, including Florian Fainelli
taking over BCM283x/BCM2711 (Raspberry Pi) from Nicolas Saenz
Julienne"
* tag 'soc-fixes-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (29 commits)
ARM: dts: aspeed: nuvia: rename vendor nuvia to qcom
arm: mach-spear: Add missing of_node_put() in time.c
ARM: cns3xxx: Fix refcount leak in cns3xxx_init
MAINTAINERS: Update email address
arm64: dts: ti: k3-am64-main: Remove support for HS400 speed mode
arm64: dts: ti: k3-j721s2: Fix overlapping GICD memory region
ARM: dts: bcm2711-rpi-400: Fix GPIO line names
bus: bt1-axi: Don't print error on -EPROBE_DEFER
bus: bt1-apb: Don't print error on -EPROBE_DEFER
ARM: Fix refcount leak in axxia_boot_secondary
ARM: dts: stm32: move SCMI related nodes in a dedicated file for stm32mp15
soc: imx: imx8m-blk-ctrl: fix display clock for LCDIF2 power domain
ARM: dts: imx6qdl-colibri: Fix capacitive touch reset polarity
ARM: dts: imx6qdl: correct PU regulator ramp delay
firmware: arm_scmi: Fix incorrect error propagation in scmi_voltage_descriptors_get
firmware: arm_scmi: Avoid using extended string-buffers sizes if not necessary
firmware: arm_scmi: Fix SENSOR_AXIS_NAME_GET behaviour when unsupported
ARM: dts: imx7: Move hsic_phy power domain to HSIC PHY node
soc: bcm: brcmstb: pm: pm-arm: Fix refcount leak in brcmstb_pm_probe
MAINTAINERS: Update BCM2711/BCM2835 maintainer
...
Linus Torvalds [Sun, 26 Jun 2022 21:00:55 +0000 (14:00 -0700)]
Merge tag 'mm-hotfixes-stable-2022-06-26' of git://git./linux/kernel/git/akpm/mm
Pull hotfixes from Andrew Morton:
"Minor things, mainly - mailmap updates, MAINTAINERS updates, etc.
Fixes for this merge window:
- fix for a damon boot hang, from SeongJae
- fix for a kfence warning splat, from Jason Donenfeld
- fix for zero-pfn pinning, from Alex Williamson
- fix for fallocate hole punch clearing, from Mike Kravetz
Fixes for previous releases:
- fix for a performance regression, from Marcelo
- fix for a hwpoisining BUG from zhenwei pi"
* tag 'mm-hotfixes-stable-2022-06-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mailmap: add entry for Christian Marangi
mm/memory-failure: disable unpoison once hw error happens
hugetlbfs: zero partial pages during fallocate hole punch
mm: memcontrol: reference to tools/cgroup/memcg_slabinfo.py
mm: re-allow pinning of zero pfns
mm/kfence: select random number before taking raw lock
MAINTAINERS: add maillist information for LoongArch
MAINTAINERS: update MM tree references
MAINTAINERS: update Abel Vesa's email
MAINTAINERS: add MEMORY HOT(UN)PLUG section and add David as reviewer
MAINTAINERS: add Miaohe Lin as a memory-failure reviewer
mailmap: add alias for jarkko@profian.com
mm/damon/reclaim: schedule 'damon_reclaim_timer' only after 'system_wq' is initialized
kthread: make it clear that kthread_create_on_node() might be terminated by any fatal signal
mm: lru_cache_disable: use synchronize_rcu_expedited
mm/page_isolation.c: fix one kernel-doc comment