git.kernel.dk Git - linux-block.git/log

netfilter: ipset: Fix suspicious rcu_dereference_protected()

When destroying all sets, we are either in pernet exit phase or
are executing a "destroy all sets command" from userspace. The latter
was taken into account in ip_set_dereference() (nfnetlink mutex is held),
but the former was not. The patch adds the required check to
rcu_dereference_protected() in ip_set_dereference().

Fixes: 4e7aaa6b82d6 ("netfilter: ipset: Fix race between namespace cleanup and gc in the list:set type")
Reported-by: syzbot+b62c37cdd58103293a5a@syzkaller.appspotmail.com
Reported-by: syzbot+cfbe1da5fdfc39efc293@syzkaller.appspotmail.com
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202406141556.e0b6f17e-lkp@intel.com
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

selftests: openvswitch: Set value to nla flags.

Netlink flags, although they don't have payload at the netlink level,
are represented as having "True" as value in pyroute2.

Without it, trying to add a flow with a flag-type action (e.g: pop_vlan)
fails with the following traceback:

Traceback (most recent call last):
  File "[...]/ovs-dpctl.py", line 2498, in <module>
    sys.exit(main(sys.argv))
             ^^^^^^^^^^^^^^
  File "[...]/ovs-dpctl.py", line 2487, in main
    ovsflow.add_flow(rep["dpifindex"], flow)
  File "[...]/ovs-dpctl.py", line 2136, in add_flow
    reply = self.nlm_request(
            ^^^^^^^^^^^^^^^^^
  File "[...]/pyroute2/netlink/nlsocket.py", line 822, in nlm_request
    return tuple(self._genlm_request(*argv, **kwarg))
                 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  File "[...]/pyroute2/netlink/generic/__init__.py", line 126, in
nlm_request
    return tuple(super().nlm_request(*argv, **kwarg))
           ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  File "[...]/pyroute2/netlink/nlsocket.py", line 1124, in nlm_request
    self.put(msg, msg_type, msg_flags, msg_seq=msg_seq)
  File "[...]/pyroute2/netlink/nlsocket.py", line 389, in put
    self.sendto_gate(msg, addr)
  File "[...]/pyroute2/netlink/nlsocket.py", line 1056, in sendto_gate
    msg.encode()
  File "[...]/pyroute2/netlink/__init__.py", line 1245, in encode
    offset = self.encode_nlas(offset)
             ^^^^^^^^^^^^^^^^^^^^^^^^
  File "[...]/pyroute2/netlink/__init__.py", line 1560, in encode_nlas
    nla_instance.setvalue(cell[1])
  File "[...]/pyroute2/netlink/__init__.py", line 1265, in setvalue
    nlv.setvalue(nla_tuple[1])
                 ~~~~~~~~~^^^
IndexError: list index out of range

Signed-off-by: Adrian Moreno <amorenoz@redhat.com>
Acked-by: Aaron Conole <aconole@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

octeontx2-pf: Fix linking objects into multiple modules

This patch fixes the below build warning messages that are
caused due to linking same files to multiple modules by
exporting the required symbols.

"scripts/Makefile.build:244: drivers/net/ethernet/marvell/octeontx2/nic/Makefile:
otx2_devlink.o is added to multiple modules: rvu_nicpf rvu_nicvf

scripts/Makefile.build:244: drivers/net/ethernet/marvell/octeontx2/nic/Makefile:
otx2_dcbnl.o is added to multiple modules: rvu_nicpf rvu_nicvf"

Fixes: 8e67558177f8 ("octeontx2-pf: PFC config support with DCBx").
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

octeontx2-pf: Add error handling to VLAN unoffload handling

otx2_sq_append_skb makes used of __vlan_hwaccel_push_inside()
to unoffload VLANs - push them from skb meta data into skb data.
However, it omitts a check for __vlan_hwaccel_push_inside()
returning NULL.

Found by inspection based on [1] and [2].
Compile tested only.

[1] Re: [PATCH net-next v1] net: stmmac: Enable TSO on VLANs
https://lore.kernel.org/all/ZmrN2W8Fye450TKs@shell.armlinux.org.uk/
[2] Re: [PATCH net-next v2] net: stmmac: Enable TSO on VLANs
https://lore.kernel.org/all/CANn89i+11L5=tKsa7V7Aeyxaj6nYGRwy35PAbCRYJ73G+b25sg@mail.gmail.com/

Fixes: fd9d7859db6c ("octeontx2-pf: Implement ingress/egress VLAN offload")
Signed-off-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'virtio_net-csum-xdp-fixes'

Heng Qi says:

====================
virtio_net: fixes for checksum offloading and XDP handling

This series of patches aim to address two specific issues identified
in the virtio_net driver related to checksum offloading and XDP
processing of fully checksummed packets.

The first patch corrects the handling of checksum offloading in the
driver. The second patch addresses an issue where the XDP program had
no trouble with fully checksummed packets.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

virtio_net: fixing XDP for fully checksummed packets handling

The XDP program can't correctly handle partially checksummed
packets, but works fine with fully checksummed packets. If the
device has already validated fully checksummed packets, then
the driver doesn't need to re-validate them, saving CPU resources.

Additionally, the driver does not drop all partially checksummed
packets when VIRTIO_NET_F_GUEST_CSUM is not negotiated. This is
not a bug, as the driver has always done this.

Fixes: 436c9453a1ac ("virtio-net: keep vnet header zeroed after processing XDP")
Signed-off-by: Heng Qi <hengqi@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

virtio_net: checksum offloading handling fix

In virtio spec 0.95, VIRTIO_NET_F_GUEST_CSUM was designed to handle
partially checksummed packets, and the validation of fully checksummed
packets by the device is independent of VIRTIO_NET_F_GUEST_CSUM
negotiation. However, the specification erroneously stated:

"If VIRTIO_NET_F_GUEST_CSUM is not negotiated, the device MUST set flags
to zero and SHOULD supply a fully checksummed packet to the driver."

This statement is inaccurate because even without VIRTIO_NET_F_GUEST_CSUM
negotiation, the device can still set the VIRTIO_NET_HDR_F_DATA_VALID flag.
Essentially, the device can facilitate the validation of these packets'
checksums - a process known as RX checksum offloading - removing the need
for the driver to do so.

This scenario is currently not implemented in the driver and requires
correction. The necessary specification correction[1] has been made and
approved in the virtio TC vote.
[1] https://lists.oasis-open.org/archives/virtio-comment/202401/msg00011.html

Fixes: 4f49129be6fa ("virtio-net: Set RXCSUM feature if GUEST_CSUM is available")
Signed-off-by: Heng Qi <hengqi@linux.alibaba.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: usb: ax88179_178a: improve reset check

After ecf848eb934b ("net: usb: ax88179_178a: fix link status when link is
set to down/up") to not reset from usbnet_open after the reset from
usbnet_probe at initialization stage to speed up this, some issues have
been reported.

It seems to happen that if the initialization is slower, and some time
passes between the probe operation and the open operation, the second reset
from open is necessary too to have the device working. The reason is that
if there is no activity with the phy, this is "disconnected".

In order to improve this, the solution is to detect when the phy is
"disconnected", and we can use the phy status register for this. So we will
only reset the device from reset operation in this situation, that is, only
if necessary.

The same bahavior is happening when the device is stopped (link set to
down) and later is restarted (link set to up), so if the phy keeps working
we only need to enable the mac again, but if enough time passes between the
device stop and restart, reset is necessary, and we can detect the
situation checking the phy status register too.

cc: stable@vger.kernel.org # 6.6+
Fixes: ecf848eb934b ("net: usb: ax88179_178a: fix link status when link is set to down/up")
Reported-by: Yongqin Liu <yongqin.liu@linaro.org>
Reported-by: Antje Miederhöfer <a.miederhoefer@gmx.de>
Reported-by: Arne Fitzenreiter <arne_f@ipfire.org>
Tested-by: Yongqin Liu <yongqin.liu@linaro.org>
Tested-by: Antje Miederhöfer <a.miederhoefer@gmx.de>
Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: stmmac: No need to calculate speed divider when offload is disabled

commit be27b8965297 ("net: stmmac: replace priv->speed with
the portTransmitRate from the tc-cbs parameters") introduced
a problem. When deleting, it prompts "Invalid portTransmitRate
0 (idleSlope - sendSlope)" and exits. Add judgment on cbs.enable.
Only when offload is enabled, speed divider needs to be calculated.

Fixes: be27b8965297 ("net: stmmac: replace priv->speed with the portTransmitRate from the tc-cbs parameters")
Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240617013922.1035854-1-xiaolei.wang@windriver.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: phy: dp83tg720: get master/slave configuration in link down state

Get master/slave configuration for initial system start with the link in
down state. This ensures ethtool shows current configuration. Also
fixes link reconfiguration with ethtool while in down state, preventing
ethtool from displaying outdated configuration.

Even though dp83tg720_config_init() is executed periodically as long as
the link is in admin up state but no carrier is detected, this is not
sufficient for the link in admin down state where
dp83tg720_read_status() is not periodically executed. To cover this
case, we need an extra read role configuration in
dp83tg720_config_aneg().

Fixes: cb80ee2f9bee1 ("net: phy: Add support for the DP83TG720S Ethernet PHY")
Cc: stable@vger.kernel.org
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20240614094516.1481231-2-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: phy: dp83tg720: wake up PHYs in managed mode

In case this PHY is bootstrapped for managed mode, we need to manually
wake it. Otherwise no link will be detected.

Cc: stable@vger.kernel.org
Fixes: cb80ee2f9bee1 ("net: phy: Add support for the DP83TG720S Ethernet PHY")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20240614094516.1481231-1-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: openvswitch: Use bash as interpreter

openvswitch.sh makes use of substitutions of the form ${ns:0:1}, to
obtain the first character of $ns. Empirically, this is works with bash
but not dash. When run with dash these evaluate to an empty string and
printing an error to stdout.

# dash -c 'ns=client; echo "${ns:0:1}"' 2>error
# cat error
dash: 1: Bad substitution
# bash -c 'ns=client; echo "${ns:0:1}"' 2>error
c
# cat error

This leads to tests that neither pass nor fail.
F.e.

TEST: arp_ping [START]
adding sandbox 'test_arp_ping'
Adding DP/Bridge IF: sbx:test_arp_ping dp:arpping {, , }
create namespaces
./openvswitch.sh: 282: eval: Bad substitution
TEST: ct_connect_v4 [START]
adding sandbox 'test_ct_connect_v4'
Adding DP/Bridge IF: sbx:test_ct_connect_v4 dp:ct4 {, , }
./openvswitch.sh: 322: eval: Bad substitution
create namespaces

Resolve this by making openvswitch.sh a bash script.

Fixes: 918423fda910 ("selftests: openvswitch: add an initial flow programming case")
Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://lore.kernel.org/r/20240617-ovs-selftest-bash-v1-1-7ae6ccd3617b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ptp: fix integer overflow in max_vclocks_store

On 32bit systems, the "4 * max" multiply can overflow. Use kcalloc()
to do the allocation to prevent this.

Fixes: 44c494c8e30e ("ptp: track available ptp vclocks information")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Heng Qi <hengqi@linux.alibaba.com>
Link: https://lore.kernel.org/r/ee8110ed-6619-4bd7-9024-28c1f2ac24f4@moroto.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

sched: act_ct: add netns into the key of tcf_ct_flow_table

zones_ht is a global hashtable for flow_table with zone as key. However,
it does not consider netns when getting a flow_table from zones_ht in
tcf_ct_init(), and it means an act_ct action in netns A may get a
flow_table that belongs to netns B if it has the same zone value.

In Shuang's test with the TOPO:

tcf2_c <---> tcf2_sw1 <---> tcf2_sw2 <---> tcf2_s

tcf2_sw1 and tcf2_sw2 saw the same flow and used the same flow table,
which caused their ct entries entering unexpected states and the
TCP connection not able to end normally.

This patch fixes the issue simply by adding netns into the key of
tcf_ct_flow_table so that an act_ct action gets a flow_table that
belongs to its own netns in tcf_ct_init().

Note that for easy coding we don't use tcf_ct_flow_table.nf_ft.net,
as the ct_ft is initialized after inserting it to the hashtable in
tcf_ct_flow_table_get() and also it requires to implement several
functions in rhashtable_params including hashfn, obj_hashfn and
obj_cmpfn.

Fixes: 64ff70b80fd4 ("net/sched: act_ct: Offload established connections to flow table")
Reported-by: Shuang Li <shuali@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/1db5b6cc6902c5fc6f8c6cbd85494a2008087be5.1718488050.git.lucien.xin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

tipc: force a dst refcount before doing decryption

As it says in commit 3bc07321ccc2 ("xfrm: Force a dst refcount before
entering the xfrm type handlers"):

"Crypto requests might return asynchronous. In this case we leave the
rcu protected region, so force a refcount on the skb's destination
entry before we enter the xfrm type input/output handlers."

On TIPC decryption path it has the same problem, and skb_dst_force()
should be called before doing decryption to avoid a possible crash.

Shuang reported this issue when this warning is triggered:

  [] WARNING: include/net/dst.h:337 tipc_sk_rcv+0x1055/0x1ea0 [tipc]
  [] Kdump: loaded Tainted: G W --------- - - 4.18.0-496.el8.x86_64+debug
  [] Workqueue: crypto cryptd_queue_worker
  [] RIP: 0010:tipc_sk_rcv+0x1055/0x1ea0 [tipc]
  [] Call Trace:
  [] tipc_sk_mcast_rcv+0x548/0xea0 [tipc]
  [] tipc_rcv+0xcf5/0x1060 [tipc]
  [] tipc_aead_decrypt_done+0x215/0x2e0 [tipc]
  [] cryptd_aead_crypt+0xdb/0x190
  [] cryptd_queue_worker+0xed/0x190
  [] process_one_work+0x93d/0x17e0

Fixes: fc1b6d6de220 ("tipc: introduce TIPC encryption & authentication")
Reported-by: Shuang Li <shuali@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/r/fbe3195fad6997a4eec62d9bf076b2ad03ac336b.1718476040.git.lucien.xin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net/sched: act_api: fix possible infinite loop in tcf_idr_check_alloc()

syzbot found hanging tasks waiting on rtnl_lock [1]

A reproducer is available in the syzbot bug.

When a request to add multiple actions with the same index is sent, the
second request will block forever on the first request. This holds
rtnl_lock, and causes tasks to hang.

Return -EAGAIN to prevent infinite looping, while keeping documented
behavior.

[1]

INFO: task kworker/1:0:5088 blocked for more than 143 seconds.
Not tainted 6.9.0-rc4-syzkaller-00173-g3cdb45594619 #0
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:kworker/1:0 state:D stack:23744 pid:5088 tgid:5088 ppid:2 flags:0x00004000
Workqueue: events_power_efficient reg_check_chans_work
Call Trace:
<TASK>
context_switch kernel/sched/core.c:5409 [inline]
__schedule+0xf15/0x5d00 kernel/sched/core.c:6746
__schedule_loop kernel/sched/core.c:6823 [inline]
schedule+0xe7/0x350 kernel/sched/core.c:6838
schedule_preempt_disabled+0x13/0x30 kernel/sched/core.c:6895
__mutex_lock_common kernel/locking/mutex.c:684 [inline]
__mutex_lock+0x5b8/0x9c0 kernel/locking/mutex.c:752
wiphy_lock include/net/cfg80211.h:5953 [inline]
reg_leave_invalid_chans net/wireless/reg.c:2466 [inline]
reg_check_chans_work+0x10a/0x10e0 net/wireless/reg.c:2481

Fixes: 0190c1d452a9 ("net: sched: atomically check-allocate action")
Reported-by: syzbot+b87c222546179f4513a7@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=b87c222546179f4513a7
Signed-off-by: David Ruth <druth@chromium.org>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20240614190326.1349786-1-druth@chromium.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Merge branch 'net-lan743x-fixes-for-multiple-wol-related-issues'

Raju Lakkaraju says:

====================
net: lan743x: Fixes for multiple WOL related issues

This patch series implement the following fixes:
1. Disable WOL upon resume in order to restore full data path operation
2. Support WOL at both the PHY and MAC appropriately
3. Remove interrupt mask clearing from config_init

Patch-3 was sent seperately earlier. Review comments in link:
https://lore.kernel.org/lkml/4a565d54-f468-4e32-8a2c-102c1203f72c@lunn.ch/T/
====================

Link: https://lore.kernel.org/r/20240614171157.190871-1-Raju.Lakkaraju@microchip.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net: phy: mxl-gpy: Remove interrupt mask clearing from config_init

When the system resumes from sleep, the phy_init_hw() function invokes
config_init(), which clears all interrupt masks and causes wake events to be
lost in subsequent wake sequences. Remove interrupt mask clearing from
config_init() and preserve relevant masks in config_intr().

Fixes: 7d901a1e878a ("net: phy: add Maxlinear GPY115/21x/24x driver")
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net: lan743x: Support WOL at both the PHY and MAC appropriately

Prevent options not supported by the PHY from being requested to it by the MAC
Whenever a WOL option is supported by both, the PHY is given priority
since that usually leads to better power savings.

Fixes: e9e13b6adc33 ("lan743x: fix for potential NULL pointer dereference with bare card")
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net: lan743x: disable WOL upon resume to restore full data path operation

When Wake-on-LAN (WoL) is active and the system is in suspend mode, triggering
a system event can wake the system from sleep, which may block the data path.
To restore normal data path functionality after waking, disable all wake-up
events. Furthermore, clear all Write 1 to Clear (W1C) status bits by writing
1's to them.

Fixes: 4d94282afd95 ("lan743x: Add power management support")
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

qca_spi: Make interrupt remembering atomic

The whole mechanism to remember occurred SPI interrupts is not atomic,
which could lead to unexpected behavior. So fix this by using atomic bit
operations instead.

Fixes: 291ab06ecf67 ("net: qualcomm: new Ethernet over SPI driver for QCA7000")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/20240614145030.7781-1-wahrenst@gmx.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

netns: Make get_net_ns() handle zero refcount net

Syzkaller hit a warning:
refcount_t: addition on 0; use-after-free.
WARNING: CPU: 3 PID: 7890 at lib/refcount.c:25 refcount_warn_saturate+0xdf/0x1d0
Modules linked in:
CPU: 3 PID: 7890 Comm: tun Not tainted 6.10.0-rc3-00100-gcaa4f9578aba-dirty #310
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
RIP: 0010:refcount_warn_saturate+0xdf/0x1d0
Code: 41 49 04 31 ff 89 de e8 9f 1e cd fe 84 db 75 9c e8 76 26 cd fe c6 05 b6 41 49 04 01 90 48 c7 c7 b8 8e 25 86 e8 d2 05 b5 fe 90 <0f> 0b 90 90 e9 79 ff ff ff e8 53 26 cd fe 0f b6 1
RSP: 0018:ffff8881067b7da0 EFLAGS: 00010286
RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff811c72ac
RDX: ffff8881026a2140 RSI: ffffffff811c72b5 RDI: 0000000000000001
RBP: ffff8881067b7db0 R08: 0000000000000000 R09: 205b5d3730353139
R10: 0000000000000000 R11: 205d303938375420 R12: ffff8881086500c4
R13: ffff8881086500c4 R14: ffff8881086500b0 R15: ffff888108650040
FS:  00007f5b2961a4c0(0000) GS:ffff88823bd00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055d7ed36fd18 CR3: 00000001482f6000 CR4: 00000000000006f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
? show_regs+0xa3/0xc0
? __warn+0xa5/0x1c0
? refcount_warn_saturate+0xdf/0x1d0
? report_bug+0x1fc/0x2d0
? refcount_warn_saturate+0xdf/0x1d0
? handle_bug+0xa1/0x110
? exc_invalid_op+0x3c/0xb0
? asm_exc_invalid_op+0x1f/0x30
? __warn_printk+0xcc/0x140
? __warn_printk+0xd5/0x140
? refcount_warn_saturate+0xdf/0x1d0
get_net_ns+0xa4/0xc0
? __pfx_get_net_ns+0x10/0x10
open_related_ns+0x5a/0x130
__tun_chr_ioctl+0x1616/0x2370
? __sanitizer_cov_trace_switch+0x58/0xa0
? __sanitizer_cov_trace_const_cmp2+0x1c/0x30
? __pfx_tun_chr_ioctl+0x10/0x10
tun_chr_ioctl+0x2f/0x40
__x64_sys_ioctl+0x11b/0x160
x64_sys_call+0x1211/0x20d0
do_syscall_64+0x9e/0x1d0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f5b28f165d7
Code: b3 66 90 48 8b 05 b1 48 2d 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 81 48 2d 00 8
RSP: 002b:00007ffc2b59c5e8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f5b28f165d7
RDX: 0000000000000000 RSI: 00000000000054e3 RDI: 0000000000000003
RBP: 00007ffc2b59c650 R08: 00007f5b291ed8c0 R09: 00007f5b2961a4c0
R10: 0000000029690010 R11: 0000000000000246 R12: 0000000000400730
R13: 00007ffc2b59cf40 R14: 0000000000000000 R15: 0000000000000000
</TASK>
Kernel panic - not syncing: kernel: panic_on_warn set ...

This is trigger as below:
          ns0                                    ns1
tun_set_iff() //dev is tun0
   tun->dev = dev
//ip link set tun0 netns ns1
                                       put_net() //ref is 0
__tun_chr_ioctl() //TUNGETDEVNETNS
   net = dev_net(tun->dev);
   open_related_ns(&net->ns, get_net_ns); //ns1
     get_net_ns()
        get_net() //addition on 0

Use maybe_get_net() in get_net_ns in case net's ref is zero to fix this

Fixes: 0c3e0e3bb623 ("tun: Add ioctl() TUNGETDEVNETNS cmd to allow obtaining real net ns of tun device")
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20240614131302.2698509-1-yuehaibing@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

xfrm6: check ip6_dst_idev() return value in xfrm6_get_saddr()

ip6_dst_idev() can return NULL, xfrm6_get_saddr() must act accordingly.

syzbot reported:

Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN PTI
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
CPU: 1 PID: 12 Comm: kworker/u8:1 Not tainted 6.10.0-rc2-syzkaller-00383-gb8481381d4e2 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/02/2024
Workqueue: wg-kex-wg1 wg_packet_handshake_send_worker
RIP: 0010:xfrm6_get_saddr+0x93/0x130 net/ipv6/xfrm6_policy.c:64
Code: df 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 97 00 00 00 4c 8b ab d8 00 00 00 48 b8 00 00 00 00 00 fc ff df 4c 89 ea 48 c1 ea 03 <80> 3c 02 00 0f 85 86 00 00 00 4d 8b 6d 00 e8 ca 13 47 01 48 b8 00
RSP: 0018:ffffc90000117378 EFLAGS: 00010246
RAX: dffffc0000000000 RBX: ffff88807b079dc0 RCX: ffffffff89a0d6d7
RDX: 0000000000000000 RSI: ffffffff89a0d6e9 RDI: ffff88807b079e98
RBP: ffff88807ad73248 R08: 0000000000000007 R09: fffffffffffff000
R10: ffff88807b079dc0 R11: 0000000000000007 R12: ffffc90000117480
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
FS:  0000000000000000(0000) GS:ffff8880b9300000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f4586d00440 CR3: 0000000079042000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
  xfrm_get_saddr net/xfrm/xfrm_policy.c:2452 [inline]
  xfrm_tmpl_resolve_one net/xfrm/xfrm_policy.c:2481 [inline]
  xfrm_tmpl_resolve+0xa26/0xf10 net/xfrm/xfrm_policy.c:2541
  xfrm_resolve_and_create_bundle+0x140/0x2570 net/xfrm/xfrm_policy.c:2835
  xfrm_bundle_lookup net/xfrm/xfrm_policy.c:3070 [inline]
  xfrm_lookup_with_ifid+0x4d1/0x1e60 net/xfrm/xfrm_policy.c:3201
  xfrm_lookup net/xfrm/xfrm_policy.c:3298 [inline]
  xfrm_lookup_route+0x3b/0x200 net/xfrm/xfrm_policy.c:3309
  ip6_dst_lookup_flow+0x15c/0x1d0 net/ipv6/ip6_output.c:1256
  send6+0x611/0xd20 drivers/net/wireguard/socket.c:139
  wg_socket_send_skb_to_peer+0xf9/0x220 drivers/net/wireguard/socket.c:178
  wg_socket_send_buffer_to_peer+0x12b/0x190 drivers/net/wireguard/socket.c:200
  wg_packet_send_handshake_initiation+0x227/0x360 drivers/net/wireguard/send.c:40
  wg_packet_handshake_send_worker+0x1c/0x30 drivers/net/wireguard/send.c:51
  process_one_work+0x9fb/0x1b60 kernel/workqueue.c:3231
  process_scheduled_works kernel/workqueue.c:3312 [inline]
  worker_thread+0x6c8/0xf70 kernel/workqueue.c:3393
  kthread+0x2c1/0x3a0 kernel/kthread.c:389
  ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147
  ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240615154231.234442-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ipv6: prevent possible NULL dereference in rt6_probe()

syzbot caught a NULL dereference in rt6_probe() [1]

Bail out if  __in6_dev_get() returns NULL.

[1]
Oops: general protection fault, probably for non-canonical address 0xdffffc00000000cb: 0000 [#1] PREEMPT SMP KASAN PTI
KASAN: null-ptr-deref in range [0x0000000000000658-0x000000000000065f]
CPU: 1 PID: 22444 Comm: syz-executor.0 Not tainted 6.10.0-rc2-syzkaller-00383-gb8481381d4e2 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/02/2024
RIP: 0010:rt6_probe net/ipv6/route.c:656 [inline]
RIP: 0010:find_match+0x8c4/0xf50 net/ipv6/route.c:758
Code: 14 fd f7 48 8b 85 38 ff ff ff 48 c7 45 b0 00 00 00 00 48 8d b8 5c 06 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 14 02 48 89 f8 83 e0 07 83 c0 03 38 d0 7c 08 84 d2 0f 85 19
RSP: 0018:ffffc900034af070 EFLAGS: 00010203
RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffc90004521000
RDX: 00000000000000cb RSI: ffffffff8990d0cd RDI: 000000000000065c
RBP: ffffc900034af150 R08: 0000000000000005 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000002 R12: 000000000000000a
R13: 1ffff92000695e18 R14: ffff8880244a1d20 R15: 0000000000000000
FS:  00007f4844a5a6c0(0000) GS:ffff8880b9300000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001b31b27000 CR3: 000000002d42c000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
  rt6_nh_find_match+0xfa/0x1a0 net/ipv6/route.c:784
  nexthop_for_each_fib6_nh+0x26d/0x4a0 net/ipv4/nexthop.c:1496
  __find_rr_leaf+0x6e7/0xe00 net/ipv6/route.c:825
  find_rr_leaf net/ipv6/route.c:853 [inline]
  rt6_select net/ipv6/route.c:897 [inline]
  fib6_table_lookup+0x57e/0xa30 net/ipv6/route.c:2195
  ip6_pol_route+0x1cd/0x1150 net/ipv6/route.c:2231
  pol_lookup_func include/net/ip6_fib.h:616 [inline]
  fib6_rule_lookup+0x386/0x720 net/ipv6/fib6_rules.c:121
  ip6_route_output_flags_noref net/ipv6/route.c:2639 [inline]
  ip6_route_output_flags+0x1d0/0x640 net/ipv6/route.c:2651
  ip6_dst_lookup_tail.constprop.0+0x961/0x1760 net/ipv6/ip6_output.c:1147
  ip6_dst_lookup_flow+0x99/0x1d0 net/ipv6/ip6_output.c:1250
  rawv6_sendmsg+0xdab/0x4340 net/ipv6/raw.c:898
  inet_sendmsg+0x119/0x140 net/ipv4/af_inet.c:853
  sock_sendmsg_nosec net/socket.c:730 [inline]
  __sock_sendmsg net/socket.c:745 [inline]
  sock_write_iter+0x4b8/0x5c0 net/socket.c:1160
  new_sync_write fs/read_write.c:497 [inline]
  vfs_write+0x6b6/0x1140 fs/read_write.c:590
  ksys_write+0x1f8/0x260 fs/read_write.c:643
  do_syscall_x64 arch/x86/entry/common.c:52 [inline]
  do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f

Fixes: 52e1635631b3 ("[IPV6]: ROUTE: Add router_probe_interval sysctl.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240615151454.166404-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ipv6: prevent possible NULL deref in fib6_nh_init()

syzbot reminds us that in6_dev_get() can return NULL.

fib6_nh_init()
    ip6_validate_gw(  &idev  )
        ip6_route_check_nh(  idev  )
            *idev = in6_dev_get(dev); // can be NULL

Oops: general protection fault, probably for non-canonical address 0xdffffc00000000bc: 0000 [#1] PREEMPT SMP KASAN PTI
KASAN: null-ptr-deref in range [0x00000000000005e0-0x00000000000005e7]
CPU: 0 PID: 11237 Comm: syz-executor.3 Not tainted 6.10.0-rc2-syzkaller-00249-gbe27b8965297 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 06/07/2024
RIP: 0010:fib6_nh_init+0x640/0x2160 net/ipv6/route.c:3606
Code: 00 00 fc ff df 4c 8b 64 24 58 48 8b 44 24 28 4c 8b 74 24 30 48 89 c1 48 89 44 24 28 48 8d 98 e0 05 00 00 48 89 d8 48 c1 e8 03 <42> 0f b6 04 38 84 c0 0f 85 b3 17 00 00 8b 1b 31 ff 89 de e8 b8 8b
RSP: 0018:ffffc900032775a0 EFLAGS: 00010202
RAX: 00000000000000bc RBX: 00000000000005e0 RCX: 0000000000000000
RDX: 0000000000000010 RSI: ffffc90003277a54 RDI: ffff88802b3a08d8
RBP: ffffc900032778b0 R08: 00000000000002fc R09: 0000000000000000
R10: 00000000000002fc R11: 0000000000000000 R12: ffff88802b3a08b8
R13: 1ffff9200064eec8 R14: ffffc90003277a00 R15: dffffc0000000000
FS:  00007f940feb06c0(0000) GS:ffff8880b9400000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 00000000245e8000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
  ip6_route_info_create+0x99e/0x12b0 net/ipv6/route.c:3809
  ip6_route_add+0x28/0x160 net/ipv6/route.c:3853
  ipv6_route_ioctl+0x588/0x870 net/ipv6/route.c:4483
  inet6_ioctl+0x21a/0x280 net/ipv6/af_inet6.c:579
  sock_do_ioctl+0x158/0x460 net/socket.c:1222
  sock_ioctl+0x629/0x8e0 net/socket.c:1341
  vfs_ioctl fs/ioctl.c:51 [inline]
  __do_sys_ioctl fs/ioctl.c:907 [inline]
  __se_sys_ioctl+0xfc/0x170 fs/ioctl.c:893
  do_syscall_x64 arch/x86/entry/common.c:52 [inline]
  do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f940f07cea9

Fixes: 428604fb118f ("ipv6: do not set routes if disable_ipv6 has been enabled")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240614082002.26407-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: mptcp: userspace_pm: fixed subtest names

It is important to have fixed (sub)test names in TAP, because these
names are used to identify them. If they are not fixed, tracking cannot
be done.

Some subtests from the userspace_pm selftest were using random numbers
in their names: the client and server address IDs from $RANDOM, and the
client port number randomly picked by the kernel when creating the
connection. These values have been replaced by 'client' and 'server'
words: that's even more helpful than showing random numbers. Note that
the addresses IDs are incremented and decremented in the test: +1 or -1
are then displayed in these cases.

Not to loose info that can be useful for debugging in case of issues,
these random numbers are now displayed at the beginning of the test.

Fixes: f589234e1af0 ("selftests: mptcp: userspace_pm: format subtests results in TAP")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240614-upstream-net-20240614-selftests-mptcp-uspace-pm-fixed-test-names-v1-1-460ad3edb429@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

tcp: clear tp->retrans_stamp in tcp_rcv_fastopen_synack()

Some applications were reporting ETIMEDOUT errors on apparently
good looking flows, according to packet dumps.

We were able to root cause the issue to an accidental setting
of tp->retrans_stamp in the following scenario:

- client sends TFO SYN with data.
- server has TFO disabled, ACKs only SYN but not payload.
- client receives SYNACK covering only SYN.
- tcp_ack() eats SYN and sets tp->retrans_stamp to 0.
- tcp_rcv_fastopen_synack() calls tcp_xmit_retransmit_queue()
  to retransmit TFO payload w/o SYN, sets tp->retrans_stamp to "now",
  but we are not in any loss recovery state.
- TFO payload is ACKed.
- we are not in any loss recovery state, and don't see any dupacks,
  so we don't get to any code path that clears tp->retrans_stamp.
- tp->retrans_stamp stays non-zero for the lifetime of the connection.
- after first RTO, tcp_clamp_rto_to_user_timeout() clamps second RTO
  to 1 jiffy due to bogus tp->retrans_stamp.
- on clamped RTO with non-zero icsk_retransmits, retransmits_timed_out()
  sets start_ts from tp->retrans_stamp from TFO payload retransmit
  hours/days ago, and computes bogus long elapsed time for loss recovery,
  and suffers ETIMEDOUT early.

Fixes: a7abf3cd76e1 ("tcp: consider using standard rtx logic in tcp_rcv_fastopen_synack()")
CC: stable@vger.kernel.org
Co-developed-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Co-developed-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240614130615.396837-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

netrom: Fix a memory leak in nr_heartbeat_expiry()

syzbot reported a memory leak in nr_create() [0].

Commit 409db27e3a2e ("netrom: Fix use-after-free of a listening socket.")
added sock_hold() to the nr_heartbeat_expiry() function, where
a) a socket has a SOCK_DESTROY flag or
b) a listening socket has a SOCK_DEAD flag.

But in the case "a," when the SOCK_DESTROY flag is set, the file descriptor
has already been closed and the nr_release() function has been called.
So it makes no sense to hold the reference count because no one will
call another nr_destroy_socket() and put it as in the case "b."

nr_connect
  nr_establish_data_link
    nr_start_heartbeat

nr_release
  switch (nr->state)
  case NR_STATE_3
    nr->state = NR_STATE_2
    sock_set_flag(sk, SOCK_DESTROY);

                        nr_rx_frame
                          nr_process_rx_frame
                            switch (nr->state)
                            case NR_STATE_2
                              nr_state2_machine()
                                nr_disconnect()
                                  nr_sk(sk)->state = NR_STATE_0
                                  sock_set_flag(sk, SOCK_DEAD)

                        nr_heartbeat_expiry
                          switch (nr->state)
                          case NR_STATE_0
                            if (sock_flag(sk, SOCK_DESTROY) ||
                               (sk->sk_state == TCP_LISTEN
                                 && sock_flag(sk, SOCK_DEAD)))
                               sock_hold()  // ( !!! )
                               nr_destroy_socket()

To fix the memory leak, let's call sock_hold() only for a listening socket.

Found by InfoTeCS on behalf of Linux Verification Center
(linuxtesting.org) with Syzkaller.

[0]: https://syzkaller.appspot.com/bug?extid=d327a1f3b12e1e206c16

Reported-by: syzbot+d327a1f3b12e1e206c16@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=d327a1f3b12e1e206c16
Fixes: 409db27e3a2e ("netrom: Fix use-after-free of a listening socket.")
Signed-off-by: Gavrilov Ilia <Ilia.Gavrilov@infotecs.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch '40GbE' of git://git./linux/kernel/git/tnguy/net-queue

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2024-06-11 (ice)

This series contains updates to ice driver only.

En-Wei Wu resolves IRQ collision during suspend.

Paul corrects 200Gbps speed being reported as unknown.

Wojciech adds retry mechanism when package download fails.

* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
  ice: implement AQ download pkg retry
  ice: fix 200G link speed message log
  ice: avoid IRQ collision to fix init failure on ACPI S3 resume
====================

Link: https://lore.kernel.org/r/20240613154514.1948785-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

netdev-genl: fix error codes when outputting XDP features

-EINVAL will interrupt the dump. The correct error to return
if we have more data to dump is -EMSGSIZE.

Discovered by doing:

  for i in `seq 80`; do ip link add type veth; done
  ./cli.py --dbg-small-recv 5300 --spec netdev.yaml --dump dev-get >> /dev/null
  [...]
     nl_len = 64 (48) nl_flags = 0x0 nl_type = 19
     nl_len = 20 (4) nl_flags = 0x2 nl_type = 3
   error: -22

Fixes: d3d854fd6a1d ("netdev-genl: create a simple family for netdev stuff")
Reviewed-by: Amritha Nambiar <amritha.nambiar@intel.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240613213044.3675745-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'for-netdev' of https://git./linux/kernel/git/bpf/bpf

Daniel Borkmann says:

====================
pull-request: bpf 2024-06-14

We've added 8 non-merge commits during the last 2 day(s) which contain
a total of 9 files changed, 92 insertions(+), 11 deletions(-).

The main changes are:

1) Silence a syzkaller splat under CONFIG_DEBUG_NET=y in pskb_pull_reason()
   triggered via __bpf_try_make_writable(), from Florian Westphal.

2) Fix removal of kfuncs during linking phase which then throws a kernel
   build warning via resolve_btfids about unresolved symbols,
   from Tony Ambardar.

3) Fix a UML x86_64 compilation failure from BPF as pcpu_hot symbol
   is not available on User Mode Linux, from Maciej Żenczykowski.

4) Fix a register corruption in reg_set_min_max triggering an invariant
   violation in BPF verifier, from Daniel Borkmann.

* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
  bpf: Harden __bpf_kfunc tag against linker kfunc removal
  compiler_types.h: Define __retain for __attribute__((__retain__))
  bpf: Avoid splat in pskb_pull_reason
  bpf: fix UML x86_64 compile failure
  selftests/bpf: Add test coverage for reg_set_min_max handling
  bpf: Reduce stack consumption in check_stack_write_fixed_off
  bpf: Fix reg_set_min_max corruption of fake_reg
  MAINTAINERS: mailmap: Update Stanislav's email address
====================

Link: https://lore.kernel.org/r/20240614203223.26500-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

bpf: Harden __bpf_kfunc tag against linker kfunc removal

BPF kfuncs are often not directly referenced and may be inadvertently
removed by optimization steps during kernel builds, thus the __bpf_kfunc
tag mitigates against this removal by including the __used macro. However,
this macro alone does not prevent removal during linking, and may still
yield build warnings (e.g. on mips64el):

  [...]
    LD      vmlinux
    BTFIDS  vmlinux
  WARN: resolve_btfids: unresolved symbol bpf_verify_pkcs7_signature
  WARN: resolve_btfids: unresolved symbol bpf_lookup_user_key
  WARN: resolve_btfids: unresolved symbol bpf_lookup_system_key
  WARN: resolve_btfids: unresolved symbol bpf_key_put
  WARN: resolve_btfids: unresolved symbol bpf_iter_task_next
  WARN: resolve_btfids: unresolved symbol bpf_iter_css_task_new
  WARN: resolve_btfids: unresolved symbol bpf_get_file_xattr
  WARN: resolve_btfids: unresolved symbol bpf_ct_insert_entry
  WARN: resolve_btfids: unresolved symbol bpf_cgroup_release
  WARN: resolve_btfids: unresolved symbol bpf_cgroup_from_id
  WARN: resolve_btfids: unresolved symbol bpf_cgroup_acquire
  WARN: resolve_btfids: unresolved symbol bpf_arena_free_pages
    NM      System.map
    SORTTAB vmlinux
    OBJCOPY vmlinux.32
  [...]

Update the __bpf_kfunc tag to better guard against linker optimization by
including the new __retain compiler macro, which fixes the warnings above.

Verify the __retain macro with readelf by checking object flags for 'R':

  $ readelf -Wa kernel/trace/bpf_trace.o
  Section Headers:
    [Nr]  Name              Type     Address  Off  Size ES Flg Lk Inf Al
  [...]
    [178] .text.bpf_key_put PROGBITS 00000000 6420 0050 00 AXR  0   0  8
  [...]
  Key to Flags:
  [...]
    R (retain), D (mbind), p (processor specific)

Fixes: 57e7c169cd6a ("bpf: Add __bpf_kfunc tag for marking kernel functions as kfuncs")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Yonghong Song <yonghong.song@linux.dev>
Closes: https://lore.kernel.org/r/202401211357.OCX9yllM-lkp@intel.com/
Link: https://lore.kernel.org/bpf/ZlmGoT9KiYLZd91S@krava/T/
Link: https://lore.kernel.org/bpf/e9c64e9b5c073dabd457ff45128aabcab7630098.1717477560.git.Tony.Ambardar@gmail.com

compiler_types.h: Define __retain for __attribute__((__retain__))

Some code includes the __used macro to prevent functions and data from
being optimized out. This macro implements __attribute__((__used__)),
which operates at the compiler and IR-level, and so still allows a linker
to remove objects intended to be kept.

Compilers supporting __attribute__((__retain__)) can address this gap by
setting the flag SHF_GNU_RETAIN on the section of a function/variable,
indicating to the linker the object should be retained. This attribute is
available since gcc 11, clang 13, and binutils 2.36.

Provide a __retain macro implementing __attribute__((__retain__)), whose
first user will be the '__bpf_kfunc' tag.

[ Additional remark from discussion:

  Why is CONFIG_LTO_CLANG added here? The __used macro permits garbage
  collection at section level, so CLANG_LTO_CLANG without
  CONFIG_LD_DEAD_CODE_DATA_ELIMINATION should not change final section
  dynamics?

  The conditional guard was included to ensure consistent behaviour
  between __retain and other features forcing split sections. In
  particular, the same guard is used in vmlinux.lds.h to merge split
  sections where needed. For example, using __retain in LLVM builds
  without CONFIG_LTO was failing CI tests on kernel-patches/bpf because
  the kernel didn't boot properly. And in further testing, the kernel
  had no issues loading BPF kfunc modules with such split sections, so
  the module (partial) linking scripts were left alone. ]

Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/ZlmGoT9KiYLZd91S@krava/T/
Link: https://lore.kernel.org/bpf/b31bca5a5e6765a0f32cc8c19b1d9cdbfaa822b5.1717477560.git.Tony.Ambardar@gmail.com

bpf: Avoid splat in pskb_pull_reason

syzkaller builds (CONFIG_DEBUG_NET=y) frequently trigger a debug
hint in pskb_may_pull.

We'd like to retain this debug check because it might hint at integer
overflows and other issues (kernel code should pull headers, not huge
value).

In bpf case, this splat isn't interesting at all: such (nonsensical)
bpf programs are typically generated by a fuzzer anyway.

Do what Eric suggested and suppress such warning.

For CONFIG_DEBUG_NET=n we don't need the extra check because
pskb_may_pull will do the right thing: return an error without the
WARN() backtrace.

Fixes: 219eee9c0d16 ("net: skbuff: add overflow debug check to pull/push helpers")
Reported-by: syzbot+0c4150bff9fff3bf023c@syzkaller.appspotmail.com
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Closes: https://syzkaller.appspot.com/bug?extid=0c4150bff9fff3bf023c
Link: https://lore.kernel.org/netdev/9f254c96-54f2-4457-b7ab-1d9f6187939c@gmail.com/
Link: https://lore.kernel.org/bpf/20240614101801.9496-1-fw@strlen.de

Merge tag 'wireless-2024-06-14' of git://git./linux/kernel/git/wireless/wireless

Johannes Berg says:

====================
Various fixes:
* cfg80211: wext scan
* mac80211: monitor regression, scan counted_by, offload
* iwlwifi: locking, 6 GHz scan, remain-on-channel

* tag 'wireless-2024-06-14' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
  wifi: mac80211: fix monitor channel with chanctx emulation
  wifi: mac80211: Avoid address calculations via out of bounds array indexing
  wifi: mac80211: Recalc offload when monitor stop
  wifi: iwlwifi: scan: correctly check if PSC listen period is needed
  wifi: iwlwifi: mvm: fix ROC version check
  wifi: iwlwifi: mvm: unlock mvm mutex
  wifi: cfg80211: wext: add extra SIOCSIWSCAN data check
  wifi: cfg80211: wext: set ssids=NULL for passive scans
====================

Link: https://lore.kernel.org/r/20240614085710.24103-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

cipso: make cipso_v4_skbuff_delattr() fully remove the CIPSO options

As the comment in this function says, the code currently just clears the
CIPSO part with IPOPT_NOP, rather than removing it completely and
trimming the packet. The other cipso_v4_*_delattr() functions, however,
do the proper removal and also calipso_skbuff_delattr() makes an effort
to remove the CALIPSO options instead of replacing them with padding.

Some routers treat IPv4 packets with anything (even NOPs) in the option
header as a special case and take them through a slower processing path.
Consequently, hardening guides such as STIG recommend to configure such
routers to drop packets with non-empty IP option headers [1][2]. Thus,
users might expect NetLabel to produce packets with minimal padding (or
at least with no padding when no actual options are present).

Implement the proper option removal to address this and to be closer to
what the peer functions do.

[1] https://www.stigviewer.com/stig/juniper_router_rtr/2019-09-27/finding/V-90937
[2] https://www.stigviewer.com/stig/cisco_ios_xe_router_rtr/2021-03-26/finding/V-217001

Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

cipso: fix total option length computation

As evident from the definition of ip_options_get(), the IP option
IPOPT_END is used to pad the IP option data array, not IPOPT_NOP. Yet
the loop that walks the IP options to determine the total IP options
length in cipso_v4_delopt() doesn't take IPOPT_END into account.

Fix it by recognizing the IPOPT_END value as the end of actual options.

Fixes: 014ab19a69c3 ("selinux: Set socket NetLabel based on connection endpoint")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

wifi: mac80211: fix monitor channel with chanctx emulation

After the channel context emulation, there were reports that
changing the monitor channel no longer works. This is because
those drivers don't have WANT_MONITOR_VIF, so the setting the
channel always exits out quickly.

Fix this by always allocating the virtual monitor sdata, and
simply not telling the driver about it unless it wanted to.
This way, we have an interface/sdata to bind the chanctx to,
and the emulation can work correctly.

Cc: stable@vger.kernel.org
Fixes: 0a44dfc07074 ("wifi: mac80211: simplify non-chanctx drivers")
Reported-and-tested-by: Savyasaachi Vanga <savyasaachiv@gmail.com>
Closes: https://lore.kernel.org/r/chwoymvpzwtbmzryrlitpwmta5j6mtndocxsyqvdyikqu63lon@gfds653hkknl
Link: https://msgid.link/20240612122351.b12d4a109dde.I1831a44417faaab92bea1071209abbe4efbe3fba@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: mac80211: Avoid address calculations via out of bounds array indexing

req->n_channels must be set before req->channels[] can be used.

This patch fixes one of the issues encountered in [1].

[   83.964255] UBSAN: array-index-out-of-bounds in net/mac80211/scan.c:364:4
[   83.964258] index 0 is out of range for type 'struct ieee80211_channel *[]'
[...]
[   83.964264] Call Trace:
[   83.964267]  <TASK>
[   83.964269]  dump_stack_lvl+0x3f/0xc0
[   83.964274]  __ubsan_handle_out_of_bounds+0xec/0x110
[   83.964278]  ieee80211_prep_hw_scan+0x2db/0x4b0
[   83.964281]  __ieee80211_start_scan+0x601/0x990
[   83.964291]  nl80211_trigger_scan+0x874/0x980
[   83.964295]  genl_family_rcv_msg_doit+0xe8/0x160
[   83.964298]  genl_rcv_msg+0x240/0x270
[...]

[1] https://bugzilla.kernel.org/show_bug.cgi?id=218810

Co-authored-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Kenton Groombridge <concord@gentoo.org>
Link: https://msgid.link/20240605152218.236061-1-concord@gentoo.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

net: mvpp2: use slab_build_skb for oversized frames

Setting frag_size to 0 to indicate kmalloc has been deprecated,
use slab_build_skb directly.

Fixes: ce098da1497c ("skbuff: Introduce slab_build_skb()")
Signed-off-by: Aryan Srivastava <aryan.srivastava@alliedtelesis.co.nz>
Reviewed-by: Kees Cook <kees@kernel.org>
Link: https://lore.kernel.org/r/20240613024900.3842238-1-aryan.srivastava@alliedtelesis.co.nz
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

bpf: fix UML x86_64 compile failure

pcpu_hot (defined in arch/x86) is not available on user mode linux (ARCH=um)

Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Fixes: 1ae6921009e5 ("bpf: inline bpf_get_smp_processor_id() helper")
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Link: https://lore.kernel.org/r/20240613173146.2524647-1-maze@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

selftests/bpf: Add test coverage for reg_set_min_max handling

Add a test case for the jmp32/k fix to ensure selftests have coverage.

Before fix:

  # ./vmtest.sh -- ./test_progs -t verifier_or_jmp32_k
  [...]
  ./test_progs -t verifier_or_jmp32_k
  tester_init:PASS:tester_log_buf 0 nsec
  process_subtest:PASS:obj_open_mem 0 nsec
  process_subtest:PASS:specs_alloc 0 nsec
  run_subtest:PASS:obj_open_mem 0 nsec
  run_subtest:FAIL:unexpected_load_success unexpected success: 0
  #492/1   verifier_or_jmp32_k/or_jmp32_k: bit ops + branch on unknown value:FAIL
  #492     verifier_or_jmp32_k:FAIL
  Summary: 0/0 PASSED, 0 SKIPPED, 1 FAILED

After fix:

  # ./vmtest.sh -- ./test_progs -t verifier_or_jmp32_k
  [...]
  ./test_progs -t verifier_or_jmp32_k
  #492/1   verifier_or_jmp32_k/or_jmp32_k: bit ops + branch on unknown value:OK
  #492     verifier_or_jmp32_k:OK
  Summary: 1/1 PASSED, 0 SKIPPED, 0 FAILED

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20240613115310.25383-3-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

bpf: Reduce stack consumption in check_stack_write_fixed_off

The fake_reg moved into env->fake_reg given it consumes a lot of stack
space (120 bytes). Migrate the fake_reg in check_stack_write_fixed_off()
as well now that we have it.

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20240613115310.25383-2-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

bpf: Fix reg_set_min_max corruption of fake_reg

Juan reported that after doing some changes to buzzer [0] and implementing
a new fuzzing strategy guided by coverage, they noticed the following in
one of the probes:

  [...]
  13: (79) r6 = *(u64 *)(r0 +0)         ; R0=map_value(ks=4,vs=8) R6_w=scalar()
  14: (b7) r0 = 0                       ; R0_w=0
  15: (b4) w0 = -1                      ; R0_w=0xffffffff
  16: (74) w0 >>= 1                     ; R0_w=0x7fffffff
  17: (5c) w6 &= w0                     ; R0_w=0x7fffffff R6_w=scalar(smin=smin32=0,smax=umax=umax32=0x7fffffff,var_off=(0x0; 0x7fffffff))
  18: (44) w6 |= 2                      ; R6_w=scalar(smin=umin=smin32=umin32=2,smax=umax=umax32=0x7fffffff,var_off=(0x2; 0x7ffffffd))
  19: (56) if w6 != 0x7ffffffd goto pc+1
  REG INVARIANTS VIOLATION (true_reg2): range bounds violation u64=[0x7fffffff, 0x7ffffffd] s64=[0x7fffffff, 0x7ffffffd] u32=[0x7fffffff, 0x7ffffffd] s32=[0x7fffffff, 0x7ffffffd] var_off=(0x7fffffff, 0x0)
  REG INVARIANTS VIOLATION (false_reg1): range bounds violation u64=[0x7fffffff, 0x7ffffffd] s64=[0x7fffffff, 0x7ffffffd] u32=[0x7fffffff, 0x7ffffffd] s32=[0x7fffffff, 0x7ffffffd] var_off=(0x7fffffff, 0x0)
  REG INVARIANTS VIOLATION (false_reg2): const tnum out of sync with range bounds u64=[0x0, 0xffffffffffffffff] s64=[0x8000000000000000, 0x7fffffffffffffff] u32=[0x0, 0xffffffff] s32=[0x80000000, 0x7fffffff] var_off=(0x7fffffff, 0x0)
  19: R6_w=0x7fffffff
  20: (95) exit

  from 19 to 21: R0=0x7fffffff R6=scalar(smin=umin=smin32=umin32=2,smax=umax=smax32=umax32=0x7ffffffe,var_off=(0x2; 0x7ffffffd)) R7=map_ptr(ks=4,vs=8) R9=ctx() R10=fp0 fp-24=map_ptr(ks=4,vs=8) fp-40=mmmmmmmm
  21: R0=0x7fffffff R6=scalar(smin=umin=smin32=umin32=2,smax=umax=smax32=umax32=0x7ffffffe,var_off=(0x2; 0x7ffffffd)) R7=map_ptr(ks=4,vs=8) R9=ctx() R10=fp0 fp-24=map_ptr(ks=4,vs=8) fp-40=mmmmmmmm
  21: (14) w6 -= 2147483632             ; R6_w=scalar(smin=umin=umin32=2,smax=umax=0xffffffff,smin32=0x80000012,smax32=14,var_off=(0x2; 0xfffffffd))
  22: (76) if w6 s>= 0xe goto pc+1      ; R6_w=scalar(smin=umin=umin32=2,smax=umax=0xffffffff,smin32=0x80000012,smax32=13,var_off=(0x2; 0xfffffffd))
  23: (95) exit

  from 22 to 24: R0=0x7fffffff R6_w=14 R7=map_ptr(ks=4,vs=8) R9=ctx() R10=fp0 fp-24=map_ptr(ks=4,vs=8) fp-40=mmmmmmmm
  24: R0=0x7fffffff R6_w=14 R7=map_ptr(ks=4,vs=8) R9=ctx() R10=fp0 fp-24=map_ptr(ks=4,vs=8) fp-40=mmmmmmmm
  24: (14) w6 -= 14                     ; R6_w=0
  [...]

What can be seen here is a register invariant violation on line 19. After
the binary-or in line 18, the verifier knows that bit 2 is set but knows
nothing about the rest of the content which was loaded from a map value,
meaning, range is [2,0x7fffffff] with var_off=(0x2; 0x7ffffffd). When in
line 19 the verifier analyzes the branch, it splits the register states
in reg_set_min_max() into the registers of the true branch (true_reg1,
true_reg2) and the registers of the false branch (false_reg1, false_reg2).

Since the test is w6 != 0x7ffffffd, the src_reg is a known constant.
Internally, the verifier creates a "fake" register initialized as scalar
to the value of 0x7ffffffd, and then passes it onto reg_set_min_max(). Now,
for line 19, it is mathematically impossible to take the false branch of
this program, yet the verifier analyzes it. It is impossible because the
second bit of r6 will be set due to the prior or operation and the
constant in the condition has that bit unset (hex(fd) == binary(1111 1101).

When the verifier first analyzes the false / fall-through branch, it will
compute an intersection between the var_off of r6 and of the constant. This
is because the verifier creates a "fake" register initialized to the value
of the constant. The intersection result later refines both registers in
regs_refine_cond_op():

  [...]
  t = tnum_intersect(tnum_subreg(reg1->var_off), tnum_subreg(reg2->var_off));
  reg1->var_off = tnum_with_subreg(reg1->var_off, t);
  reg2->var_off = tnum_with_subreg(reg2->var_off, t);
  [...]

Since the verifier is analyzing the false branch of the conditional jump,
reg1 is equal to false_reg1 and reg2 is equal to false_reg2, i.e. the reg2
is the "fake" register that was meant to hold a constant value. The resulting
var_off of the intersection says that both registers now hold a known value
of var_off=(0x7fffffff, 0x0) or in other words: this operation manages to
make the verifier think that the "constant" value that was passed in the
jump operation now holds a different value.

Normally this would not be an issue since it should not influence the true
branch, however, false_reg2 and true_reg2 are pointers to the same "fake"
register. Meaning, the false branch can influence the results of the true
branch. In line 24, the verifier assumes R6_w=0, but the actual runtime
value in this case is 1. The fix is simply not passing in the same "fake"
register location as inputs to reg_set_min_max(), but instead making a
copy. Moving the fake_reg into the env also reduces stack consumption by
120 bytes. With this, the verifier successfully rejects invalid accesses
from the test program.

  [0] https://github.com/google/buzzer

Fixes: 67420501e868 ("bpf: generalize reg_set_min_max() to handle non-const register comparisons")
Reported-by: Juan José López Jaimez <jjlopezjaimez@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20240613115310.25383-1-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Merge tag 'net-6.10-rc4' of git://git./linux/kernel/git/netdev/net

Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth and netfilter.

  Slim pickings this time, probably a combination of summer, DevConf.cz,
  and the end of first half of the year at corporations.

  Current release - regressions:

   - Revert "igc: fix a log entry using uninitialized netdev", it traded
     lack of netdev name in a printk() for a crash

  Previous releases - regressions:

   - Bluetooth: L2CAP: fix rejecting L2CAP_CONN_PARAM_UPDATE_REQ

   - geneve: fix incorrectly setting lengths of inner headers in the
     skb, confusing the drivers and causing mangled packets

   - sched: initialize noop_qdisc owner to avoid false-positive
     recursion detection (recursing on CPU 0), which bubbles up to user
     space as a sendmsg() error, while noop_qdisc should silently drop

   - netdevsim: fix backwards compatibility in nsim_get_iflink()

  Previous releases - always broken:

   - netfilter: ipset: fix race between namespace cleanup and gc in the
     list:set type"

* tag 'net-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (35 commits)
  bnxt_en: Adjust logging of firmware messages in case of released token in __hwrm_send()
  af_unix: Read with MSG_PEEK loops if the first unread byte is OOB
  bnxt_en: Cap the size of HWRM_PORT_PHY_QCFG forwarded response
  gve: Clear napi->skb before dev_kfree_skb_any()
  ionic: fix use after netif_napi_del()
  Revert "igc: fix a log entry using uninitialized netdev"
  net: bridge: mst: fix suspicious rcu usage in br_mst_set_state
  net: bridge: mst: pass vlan group directly to br_mst_vlan_set_state
  net/ipv6: Fix the RT cache flush via sysctl using a previous delay
  net: stmmac: replace priv->speed with the portTransmitRate from the tc-cbs parameters
  gve: ignore nonrelevant GSO type bits when processing TSO headers
  net: pse-pd: Use EOPNOTSUPP error code instead of ENOTSUPP
  netfilter: Use flowlabel flow key when re-routing mangled packets
  netfilter: ipset: Fix race between namespace cleanup and gc in the list:set type
  netfilter: nft_inner: validate mandatory meta and payload
  tcp: use signed arithmetic in tcp_rtx_probe0_timed_out()
  mailmap: map Geliang's new email address
  mptcp: pm: update add_addr counters after connect
  mptcp: pm: inc RmAddr MIB counter once per RM_ADDR ID
  mptcp: ensure snd_una is properly initialized on connect
  ...

Merge tag 'nfs-for-6.10-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs

Pull NFS client fixes from Trond Myklebust:
"Bugfixes:
   - NFSv4.2: Fix a memory leak in nfs4_set_security_label
   - NFSv2/v3: abort nfs_atomic_open_v23 if the name is too long.
   - NFS: Add appropriate memory barriers to the sillyrename code
   - Propagate readlink errors in nfs_symlink_filler
   - NFS: don't invalidate dentries on transient errors
   - NFS: fix unnecessary synchronous writes in random write workloads
   - NFSv4.1: enforce rootpath check when deciding whether or not to trunk

  Other:
   - Change email address for Trond Myklebust due to email server concerns"

* tag 'nfs-for-6.10-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  NFS: add barriers when testing for NFS_FSDATA_BLOCKED
  SUNRPC: return proper error from gss_wrap_req_priv
  NFSv4.1 enforce rootpath check in fs_location query
  NFS: abort nfs_atomic_open_v23 if name is too long.
  nfs: don't invalidate dentries on transient errors
  nfs: Avoid flushing many pages with NFS_FILE_SYNC
  nfs: propagate readlink errors in nfs_symlink_filler
  MAINTAINERS: Change email address for Trond Myklebust
  NFSv4: Fix memory leak in nfs4_set_security_label

Merge tag 'fixes-2024-06-13' of git://git./linux/kernel/git/rppt/memblock

Pull memblock fixes from Mike Rapoport:
"Fix validation of NUMA coverage.

  memblock_validate_numa_coverage() was checking for a unset node ID
  using NUMA_NO_NODE, but x86 used MAX_NUMNODES when no node ID was
  specified by buggy firmware.

  Update memblock to substitute MAX_NUMNODES with NUMA_NO_NODE in
  memblock_set_node() and use NUMA_NO_NODE in x86::numa_init()"

* tag 'fixes-2024-06-13' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
  x86/mm/numa: Use NUMA_NO_NODE when calling memblock_set_node()
  memblock: make memblock_set_node() also warn about use of MAX_NUMNODES

ice: implement AQ download pkg retry

ice_aqc_opc_download_pkg (0x0C40) AQ sporadically returns error due
to FW issue. Fix this by retrying five times before moving to
Safe Mode. Sleep for 20 ms before retrying. This was tested with the
4.40 firmware.

Fixes: c76488109616 ("ice: Implement Dynamic Device Personalization (DDP) download")
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

ice: fix 200G link speed message log

Commit 24407a01e57c ("ice: Add 200G speed/phy type use") added support
for 200G PHY speeds, but did not include 200G link speed message
support. As a result the driver incorrectly reports Unknown for 200G
link speed.

Fix this by adding 200G support to ice_print_link_msg().

Fixes: 24407a01e57c ("ice: Add 200G speed/phy type use")
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

ice: avoid IRQ collision to fix init failure on ACPI S3 resume

A bug in https://bugzilla.kernel.org/show_bug.cgi?id=218906 describes
that irdma would break and report hardware initialization failed after
suspend/resume with Intel E810 NIC (tested on 6.9.0-rc5).

The problem is caused due to the collision between the irq numbers
requested in irdma and the irq numbers requested in other drivers
after suspend/resume.

The irq numbers used by irdma are derived from ice's ice_pf->msix_entries
which stores mappings between MSI-X index and Linux interrupt number.
It's supposed to be cleaned up when suspend and rebuilt in resume but
it's not, causing irdma using the old irq numbers stored in the old
ice_pf->msix_entries to request_irq() when resume. And eventually
collide with other drivers.

This patch fixes this problem. On suspend, we call ice_deinit_rdma() to
clean up the ice_pf->msix_entries (and free the MSI-X vectors used by
irdma if we've dynamically allocated them). On resume, we call
ice_init_rdma() to rebuild the ice_pf->msix_entries (and allocate the
MSI-X vectors if we would like to dynamically allocate them).

Fixes: f9f5301e7e2d ("ice: Register auxiliary device to provide RDMA")
Tested-by: Cyrus Lien <cyrus.lien@canonical.com>
Signed-off-by: En-Wei Wu <en-wei.wu@canonical.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

bnxt_en: Adjust logging of firmware messages in case of released token in __hwrm_send()

In case of token is released due to token->state == BNXT_HWRM_DEFERRED,
released token (set to NULL) is used in log messages. This issue is
expected to be prevented by HWRM_ERR_CODE_PF_UNAVAILABLE error code. But
this error code is returned by recent firmware. So some firmware may not
return it. This may lead to NULL pointer dereference.
Adjust this issue by adding token pointer check.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: 8fa4219dba8e ("bnxt_en: add dynamic debug support for HWRM messages")
Suggested-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20240611082547.12178-1-amishin@t-argos.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

af_unix: Read with MSG_PEEK loops if the first unread byte is OOB

Read with MSG_PEEK flag loops if the first byte to read is an OOB byte.
commit 22dd70eb2c3d ("af_unix: Don't peek OOB data without MSG_OOB.")
addresses the loop issue but does not address the issue that no data
beyond OOB byte can be read.

>>> from socket import *
>>> c1, c2 = socketpair(AF_UNIX, SOCK_STREAM)
>>> c1.send(b'a', MSG_OOB)
1
>>> c1.send(b'b')
1
>>> c2.recv(1, MSG_PEEK | MSG_DONTWAIT)
b'b'

>>> from socket import *
>>> c1, c2 = socketpair(AF_UNIX, SOCK_STREAM)
>>> c2.setsockopt(SOL_SOCKET, SO_OOBINLINE, 1)
>>> c1.send(b'a', MSG_OOB)
1
>>> c1.send(b'b')
1
>>> c2.recv(1, MSG_PEEK | MSG_DONTWAIT)
b'a'
>>> c2.recv(1, MSG_PEEK | MSG_DONTWAIT)
b'a'
>>> c2.recv(1, MSG_DONTWAIT)
b'a'
>>> c2.recv(1, MSG_PEEK | MSG_DONTWAIT)
b'b'
>>>

Fixes: 314001f0bf92 ("af_unix: Add OOB support")
Signed-off-by: Rao Shoaib <Rao.Shoaib@oracle.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20240611084639.2248934-1-Rao.Shoaib@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

bnxt_en: Cap the size of HWRM_PORT_PHY_QCFG forwarded response

Firmware interface 1.10.2.118 has increased the size of
HWRM_PORT_PHY_QCFG response beyond the maximum size that can be
forwarded.  When the VF's link state is not the default auto state,
the PF will need to forward the response back to the VF to indicate
the forced state.  This regression may cause the VF to fail to
initialize.

Fix it by capping the HWRM_PORT_PHY_QCFG response to the maximum
96 bytes.  The SPEEDS2_SUPPORTED flag needs to be cleared because the
new speeds2 fields are beyond the legacy structure.  Also modify
bnxt_hwrm_fwd_resp() to print a warning if the message size exceeds 96
bytes to make this failure more obvious.

Fixes: 84a911db8305 ("bnxt_en: Update firmware interface to 1.10.2.118")
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20240612231736.57823-1-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

gve: Clear napi->skb before dev_kfree_skb_any()

gve_rx_free_skb incorrectly leaves napi->skb referencing an skb after it
is freed with dev_kfree_skb_any(). This can result in a subsequent call
to napi_get_frags returning a dangling pointer.

Fix this by clearing napi->skb before the skb is freed.

Fixes: 9b8dd5e5ea48 ("gve: DQO: Add RX path")
Cc: stable@vger.kernel.org
Reported-by: Shailend Chand <shailend@google.com>
Signed-off-by: Ziwei Xiao <ziweixiao@google.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Reviewed-by: Shailend Chand <shailend@google.com>
Reviewed-by: Praveen Kaligineedi <pkaligineedi@google.com>
Link: https://lore.kernel.org/r/20240612001654.923887-1-ziweixiao@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ionic: fix use after netif_napi_del()

When queues are started, netif_napi_add() and napi_enable() are called.
If there are 4 queues and only 3 queues are used for the current
configuration, only 3 queues' napi should be registered and enabled.
The ionic_qcq_enable() checks whether the .poll pointer is not NULL for
enabling only the using queue' napi. Unused queues' napi will not be
registered by netif_napi_add(), so the .poll pointer indicates NULL.
But it couldn't distinguish whether the napi was unregistered or not
because netif_napi_del() doesn't reset the .poll pointer to NULL.
So, ionic_qcq_enable() calls napi_enable() for the queue, which was
unregistered by netif_napi_del().

Reproducer:
   ethtool -L <interface name> rx 1 tx 1 combined 0
   ethtool -L <interface name> rx 0 tx 0 combined 1
   ethtool -L <interface name> rx 0 tx 0 combined 4

Splat looks like:
kernel BUG at net/core/dev.c:6666!
Oops: invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
CPU: 3 PID: 1057 Comm: kworker/3:3 Not tainted 6.10.0-rc2+ #16
Workqueue: events ionic_lif_deferred_work [ionic]
RIP: 0010:napi_enable+0x3b/0x40
Code: 48 89 c2 48 83 e2 f6 80 b9 61 09 00 00 00 74 0d 48 83 bf 60 01 00 00 00 74 03 80 ce 01 f0 4f
RSP: 0018:ffffb6ed83227d48 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff97560cda0828 RCX: 0000000000000029
RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff97560cda0a28
RBP: ffffb6ed83227d50 R08: 0000000000000400 R09: 0000000000000001
R10: 0000000000000001 R11: 0000000000000001 R12: 0000000000000000
R13: ffff97560ce3c1a0 R14: 0000000000000000 R15: ffff975613ba0a20
FS:  0000000000000000(0000) GS:ffff975d5f780000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f8f734ee200 CR3: 0000000103e50000 CR4: 00000000007506f0
PKRU: 55555554
Call Trace:
<TASK>
? die+0x33/0x90
? do_trap+0xd9/0x100
? napi_enable+0x3b/0x40
? do_error_trap+0x83/0xb0
? napi_enable+0x3b/0x40
? napi_enable+0x3b/0x40
? exc_invalid_op+0x4e/0x70
? napi_enable+0x3b/0x40
? asm_exc_invalid_op+0x16/0x20
? napi_enable+0x3b/0x40
ionic_qcq_enable+0xb7/0x180 [ionic 59bdfc8a035436e1c4224ff7d10789e3f14643f8]
ionic_start_queues+0xc4/0x290 [ionic 59bdfc8a035436e1c4224ff7d10789e3f14643f8]
ionic_link_status_check+0x11c/0x170 [ionic 59bdfc8a035436e1c4224ff7d10789e3f14643f8]
ionic_lif_deferred_work+0x129/0x280 [ionic 59bdfc8a035436e1c4224ff7d10789e3f14643f8]
process_one_work+0x145/0x360
worker_thread+0x2bb/0x3d0
? __pfx_worker_thread+0x10/0x10
kthread+0xcc/0x100
? __pfx_kthread+0x10/0x10
ret_from_fork+0x2d/0x50
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30

Fixes: 0f3154e6bcb3 ("ionic: Add Tx and Rx handling")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Link: https://lore.kernel.org/r/20240612060446.1754392-1-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Revert "igc: fix a log entry using uninitialized netdev"

This reverts commit 86167183a17e03ec77198897975e9fdfbd53cb0b.

igc_ptp_init() needs to be called before igc_reset(), otherwise kernel
crash could be observed. Following the corresponding discussion [1] and
[2] revert this commit.

Link: https://lore.kernel.org/all/8fb634f8-7330-4cf4-a8ce-485af9c0a61a@intel.com/
Link: https://lore.kernel.org/all/87o78rmkhu.fsf@intel.com/
Fixes: 86167183a17e ("igc: fix a log entry using uninitialized netdev")
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20240611162456.961631-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'net-bridge-mst-fix-suspicious-rcu-usage-warning'

Nikolay Aleksandrov says:

====================
net: bridge: mst: fix suspicious rcu usage warning

This set fixes a suspicious RCU usage warning triggered by syzbot[1] in
the bridge's MST code. After I converted br_mst_set_state to RCU, I
forgot to update the vlan group dereference helper. Fix it by using
the proper helper, in order to do that we need to pass the vlan group
which is already obtained correctly by the callers for their respective
context. Patch 01 is a requirement for the fix in patch 02.

Note I did consider rcu_dereference_rtnl() but the churn is much bigger
and in every part of the bridge. We can do that as a cleanup in
net-next.

[1] https://syzkaller.appspot.com/bug?extid=9bbe2de1bc9d470eb5fe
=============================
WARNING: suspicious RCU usage
6.10.0-rc2-syzkaller-00235-g8a92980606e3 #0 Not tainted
-----------------------------
net/bridge/br_private.h:1599 suspicious rcu_dereference_protected() usage!

other info that might help us debug this:

rcu_scheduler_active = 2, debug_locks = 1
4 locks held by syz-executor.1/5374:
  #0: ffff888022d50b18 (&mm->mmap_lock){++++}-{3:3}, at: mmap_read_lock include/linux/mmap_lock.h:144 [inline]
  #0: ffff888022d50b18 (&mm->mmap_lock){++++}-{3:3}, at: __mm_populate+0x1b0/0x460 mm/gup.c:2111
  #1: ffffc90000a18c00 ((&p->forward_delay_timer)){+.-.}-{0:0}, at: call_timer_fn+0xc0/0x650 kernel/time/timer.c:1789
  #2: ffff88805fb2ccb8 (&br->lock){+.-.}-{2:2}, at: spin_lock include/linux/spinlock.h:351 [inline]
  #2: ffff88805fb2ccb8 (&br->lock){+.-.}-{2:2}, at: br_forward_delay_timer_expired+0x50/0x440 net/bridge/br_stp_timer.c:86
  #3: ffffffff8e333fa0 (rcu_read_lock){....}-{1:2}, at: rcu_lock_acquire include/linux/rcupdate.h:329 [inline]
  #3: ffffffff8e333fa0 (rcu_read_lock){....}-{1:2}, at: rcu_read_lock include/linux/rcupdate.h:781 [inline]
  #3: ffffffff8e333fa0 (rcu_read_lock){....}-{1:2}, at: br_mst_set_state+0x171/0x7a0 net/bridge/br_mst.c:105

stack backtrace:
CPU: 1 PID: 5374 Comm: syz-executor.1 Not tainted 6.10.0-rc2-syzkaller-00235-g8a92980606e3 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/02/2024
Call Trace:
  <IRQ>
  __dump_stack lib/dump_stack.c:88 [inline]
  dump_stack_lvl+0x241/0x360 lib/dump_stack.c:114
  lockdep_rcu_suspicious+0x221/0x340 kernel/locking/lockdep.c:6712
  nbp_vlan_group net/bridge/br_private.h:1599 [inline]
  br_mst_set_state+0x29e/0x7a0 net/bridge/br_mst.c:106
  br_set_state+0x28a/0x7b0 net/bridge/br_stp.c:47
  br_forward_delay_timer_expired+0x176/0x440 net/bridge/br_stp_timer.c:88
  call_timer_fn+0x18e/0x650 kernel/time/timer.c:1792
  expire_timers kernel/time/timer.c:1843 [inline]
  __run_timers kernel/time/timer.c:2417 [inline]
  __run_timer_base+0x66a/0x8e0 kernel/time/timer.c:2428
  run_timer_base kernel/time/timer.c:2437 [inline]
  run_timer_softirq+0xb7/0x170 kernel/time/timer.c:2447
  handle_softirqs+0x2c4/0x970 kernel/softirq.c:554
  __do_softirq kernel/softirq.c:588 [inline]
  invoke_softirq kernel/softirq.c:428 [inline]
  __irq_exit_rcu+0xf4/0x1c0 kernel/softirq.c:637
  irq_exit_rcu+0x9/0x30 kernel/softirq.c:649
  instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1043 [inline]
  sysvec_apic_timer_interrupt+0xa6/0xc0 arch/x86/kernel/apic/apic.c:1043
  </IRQ>
  <TASK>
====================

Link: https://lore.kernel.org/r/20240609103654.914987-1-razor@blackwall.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: bridge: mst: fix suspicious rcu usage in br_mst_set_state

I converted br_mst_set_state to RCU to avoid a vlan use-after-free
but forgot to change the vlan group dereference helper. Switch to vlan
group RCU deref helper to fix the suspicious rcu usage warning.

Fixes: 3a7c1661ae13 ("net: bridge: mst: fix vlan use-after-free")
Reported-by: syzbot+9bbe2de1bc9d470eb5fe@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=9bbe2de1bc9d470eb5fe
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20240609103654.914987-3-razor@blackwall.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: bridge: mst: pass vlan group directly to br_mst_vlan_set_state

Pass the already obtained vlan group pointer to br_mst_vlan_set_state()
instead of dereferencing it again. Each caller has already correctly
dereferenced it for their context. This change is required for the
following suspicious RCU dereference fix. No functional changes
intended.

Fixes: 3a7c1661ae13 ("net: bridge: mst: fix vlan use-after-free")
Reported-by: syzbot+9bbe2de1bc9d470eb5fe@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=9bbe2de1bc9d470eb5fe
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20240609103654.914987-2-razor@blackwall.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

MAINTAINERS: mailmap: Update Stanislav's email address

Moving to personal address for upstream work.

Signed-off-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20240612225334.41869-1-sdf@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

net/ipv6: Fix the RT cache flush via sysctl using a previous delay

The net.ipv6.route.flush system parameter takes a value which specifies
a delay used during the flush operation for aging exception routes. The
written value is however not used in the currently requested flush and
instead utilized only in the next one.

A problem is that ipv6_sysctl_rtcache_flush() first reads the old value
of net->ipv6.sysctl.flush_delay into a local delay variable and then
calls proc_dointvec() which actually updates the sysctl based on the
provided input.

Fix the problem by switching the order of the two operations.

Fixes: 4990509f19e8 ("[NETNS][IPV6]: Make sysctls route per namespace.")
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240607112828.30285-1-petr.pavlu@suse.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'for-linus' of git://git./linux/kernel/git/rmk/linux

Pull ARM and clkdev fixes from Russell King:

- Fix clkdev - erroring out on long strings causes boot failures, so
   don't do this. Still warn about the over-sized strings (which will
   never match and thus their registration with clkdev is useless)

- Fix for ftrace with frame pointer unwinder with recent GCC changing
   the way frames are stacked.

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux:
  ARM: 9405/1: ftrace: Don't assume stack frames are contiguous in memory
  clkdev: don't fail clkdev_alloc() if over-sized

Merge tag 'nf-24-06-11' of git://git./linux/kernel/git/netfilter/nf

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for net:

Patch #1 fixes insufficient sanitization of netlink attributes for the
inner expression which can trigger nul-pointer dereference,
from Davide Ornaghi.

Patch #2 address a report that there is a race condition between
         namespace cleanup and the garbage collection of the list:set
         type. This patch resolves this issue with other minor issues
as well, from Jozsef Kadlecsik.

Patch #3 ip6_route_me_harder() ignores flowlabel/dsfield when ip dscp
has been mangled, this unbreaks ip6 dscp set $v,
from Florian Westphal.

All of these patches address issues that are present in several releases.

* tag 'nf-24-06-11' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
  netfilter: Use flowlabel flow key when re-routing mangled packets
  netfilter: ipset: Fix race between namespace cleanup and gc in the list:set type
  netfilter: nft_inner: validate mandatory meta and payload
====================

Link: https://lore.kernel.org/r/20240611220323.413713-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'bcachefs-2024-06-12' of https://evilpiepirate.org/git/bcachefs

Pull bcachefs fixes from Kent Overstreet:

- fix kworker explosion, due to calling submit_bio() (which can block)
   from a multithreaded workqueue

- fix error handling in btree node scan

- forward compat fix: kill an old debug assert

- key cache shrinker fixes

   This is a partial fix for stalls doing multithreaded creates - there
   were various O(n^2) issues the key cache shrinker was hitting [1].

   There's more work coming here; I'm working on a patch to delete the
   key cache lock, which initial testing shows to be a pretty drastic
   performance improvement

- assorted syzbot fixes

Link: https://lore.kernel.org/linux-bcachefs/CAGudoHGenxzk0ZqPXXi1_QDbfqQhGHu+wUwzyS6WmfkUZ1HiXA@mail.gmail.com/
* tag 'bcachefs-2024-06-12' of https://evilpiepirate.org/git/bcachefs:
  bcachefs: Fix rcu_read_lock() leak in drop_extra_replicas
  bcachefs: Add missing bch_inode_info.ei_flags init
  bcachefs: Add missing synchronize_srcu_expedited() call when shutting down
  bcachefs: Check for invalid bucket from bucket_gen(), gc_bucket()
  bcachefs: Replace bucket_valid() asserts in bucket lookup with proper checks
  bcachefs: Fix snapshot_create_lock lock ordering
  bcachefs: Fix refcount leak in check_fix_ptrs()
  bcachefs: Leave a buffer in the btree key cache to avoid lock thrashing
  bcachefs: Fix reporting of freed objects from key cache shrinker
  bcachefs: set sb->s_shrinker->seeks = 0
  bcachefs: increase key cache shrinker batch size
  bcachefs: Enable automatic shrinking for rhashtables
  bcachefs: fix the display format for show-super
  bcachefs: fix stack frame size in fsck.c
  bcachefs: Delete incorrect BTREE_ID_NR assertion
  bcachefs: Fix incorrect error handling found_btree_node_is_readable()
  bcachefs: Split out btree_write_submit_wq

mailmap: Add my outdated addresses to the map file

There is a couple of outdated addresses that are still visible
in the Git history, add them to .mailmap.

While at it, replace one in the comment.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

wifi: mac80211: Recalc offload when monitor stop

When a monitor interface is started, ieee80211_recalc_offload() is
called and 802.11 encapsulation offloading support get disabled so
monitor interface could get native wifi frames directly. But when
this interface is stopped there is no need to keep the 802.11
encpasulation offloading off.

This call ieee80211_recalc_offload() when monitor interface is stopped
so 802.11 encapsulation offloading gets re-activated if possible.

Fixes: 6aea26ce5a4c ("mac80211: rework tx encapsulation offload API")
Signed-off-by: Remi Pommarel <repk@triplefau.lt>
Link: https://msgid.link/840baab454f83718e6e16fd836ac597d924e85b9.1716048326.git.repk@triplefau.lt
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: scan: correctly check if PSC listen period is needed

The flags variable is incorrectly checked while it is still cleared and
has not been assigned any value yet.
Fix it.

Fixes: a615323f7f90 ("wifi: iwlwifi: mvm: always apply 6 GHz probe limitations")
Signed-off-by: Ayala Beker <ayala.beker@intel.com>
Reviewed-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240605140556.291c33f9a283.Id651fe69828aebce177b49b2316c5780906f1b37@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: mvm: fix ROC version check

For using the ROC command, check that the ROC version
is *greater or equal* to 3, rather than *equal* to 3.
The ROC version was added to the TLV starting from
version 3.

Fixes: 67ac248e4db0 ("wifi: iwlwifi: mvm: implement ROC version 3")
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240605140327.93d86cd188ad.Iceadef5a2f3cfa4a127e94a0405eba8342ec89c1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: mvm: unlock mvm mutex

Unlock the mvm mutex before returning from a
function with the mutex locked.

Fixes: a1efeb823084 ("wifi: iwlwifi: mvm: Block EMLSR when a p2p/softAP vif is active")
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240605140327.96cb956db4af.Ib468cbad38959910977b5581f6111ab0afae9880@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: cfg80211: wext: add extra SIOCSIWSCAN data check

In 'cfg80211_wext_siwscan()', add extra check whether number of
channels passed via 'ioctl(sock, SIOCSIWSCAN, ...)' doesn't exceed
IW_MAX_FREQUENCIES and reject invalid request with -EINVAL otherwise.

Reported-by: syzbot+253cd2d2491df77c93ac@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=253cd2d2491df77c93ac
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Link: https://msgid.link/20240531032010.451295-1-dmantipov@yandex.ru
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: cfg80211: wext: set ssids=NULL for passive scans

In nl80211, we always set the ssids of a scan request to
NULL when n_ssids==0 (passive scan). Drivers have relied
on this behaviour in the past, so we fixed it in 6 GHz
scan requests as well, and added a warning so we'd have
assurance the API would always be called that way.

syzbot found that wext doesn't ensure that, so we reach
the check and trigger the warning. Fix the wext code to
set the ssids pointer to NULL when there are none.

Reported-by: syzbot+cd6135193ba6bb9ad158@syzkaller.appspotmail.com
Fixes: f7a8b10bfd61 ("wifi: cfg80211: fix 6 GHz scan request building")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

net: stmmac: replace priv->speed with the portTransmitRate from the tc-cbs parameters

The current cbs parameter depends on speed after uplinking,
which is not needed and will report a configuration error
if the port is not initially connected. The UAPI exposed by
tc-cbs requires userspace to recalculate the send slope anyway,
because the formula depends on port_transmit_rate (see man tc-cbs),
which is not an invariant from tc's perspective. Therefore, we
use offload->sendslope and offload->idleslope to derive the
original port_transmit_rate from the CBS formula.

Fixes: 1f705bc61aee ("net: stmmac: Add support for CBS QDISC")
Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20240608143524.2065736-1-xiaolei.wang@windriver.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

gve: ignore nonrelevant GSO type bits when processing TSO headers

TSO currently fails when the skb's gso_type field has more than one bit
set.

TSO packets can be passed from userspace using PF_PACKET, TUNTAP and a
few others, using virtio_net_hdr (e.g., PACKET_VNET_HDR). This includes
virtualization, such as QEMU, a real use-case.

The gso_type and gso_size fields as passed from userspace in
virtio_net_hdr are not trusted blindly by the kernel. It adds gso_type
|= SKB_GSO_DODGY to force the packet to enter the software GSO stack
for verification.

This issue might similarly come up when the CWR bit is set in the TCP
header for congestion control, causing the SKB_GSO_TCP_ECN gso_type bit
to be set.

Fixes: a57e5de476be ("gve: DQO: Add TX path")
Signed-off-by: Joshua Washington <joshwash@google.com>
Reviewed-by: Praveen Kaligineedi <pkaligineedi@google.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Suggested-by: Eric Dumazet <edumazet@google.com>
Acked-by: Andrei Vagin <avagin@gmail.com>
v2 - Remove unnecessary comments, remove line break between fixes tag
and signoffs.

v3 - Add back unrelated empty line removal.

Link: https://lore.kernel.org/r/20240610225729.2985343-1-joshwash@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'for-net-2024-06-10' of git://git./linux/kernel/git/bluetooth/bluetooth

Luiz Augusto von Dentz says:

====================
bluetooth pull request for net:

- hci_sync: fix not using correct handle
- L2CAP: fix rejecting L2CAP_CONN_PARAM_UPDATE_REQ
- L2CAP: fix connection setup in l2cap_connect

* tag 'for-net-2024-06-10' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
  Bluetooth: fix connection setup in l2cap_connect
  Bluetooth: L2CAP: Fix rejecting L2CAP_CONN_PARAM_UPDATE_REQ
  Bluetooth: hci_sync: Fix not using correct handle
====================

Link: https://lore.kernel.org/r/20240610135803.920662-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: pse-pd: Use EOPNOTSUPP error code instead of ENOTSUPP

ENOTSUPP is not a SUSV4 error code, prefer EOPNOTSUPP as reported by
checkpatch script.

Fixes: 18ff0bcda6d1 ("ethtool: add interface to interact with Ethernet Power Equipment")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://lore.kernel.org/r/20240610083426.740660-1-kory.maincent@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

bcachefs: Fix rcu_read_lock() leak in drop_extra_replicas

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Merge tag 'vfs-6.10-rc4.fixes' of git://git./linux/kernel/git/vfs/vfs

Pull vfs fixes from Christian Brauner:
"Misc:
   - Restore debugfs behavior of ignoring unknown mount options
   - Fix kernel doc for netfs_wait_for_oustanding_io()
   - Fix struct statx comment after new addition for this cycle
   - Fix a check in find_next_fd()

  iomap:
   - Fix data zeroing behavior when an extent spans the block that
     contains i_size
   - Restore i_size increasing in iomap_write_end() for now to avoid
     stale data exposure on xfs with a realtime device

  Cachefiles:
   - Remove unneeded fdtable.h include
   - Improve trace output for cachefiles_obj_{get,put}_ondemand_fd()
   - Remove requests from the request list to prevent accessing already
     freed requests
   - Fix UAF when issuing restore command while the daemon is still
     alive by adding an additional reference count to requests
   - Fix UAF by grabbing a reference during xarray lookup with xa_lock()
     held
   - Simplify error handling in cachefiles_ondemand_daemon_read()
   - Add consistency checks read and open requests to avoid crashes
   - Add a spinlock to protect ondemand_id variable which is used to
     determine whether an anonymous cachefiles fd has already been
     closed
   - Make on-demand reads killable allowing to handle broken cachefiles
     daemon better
   - Flush all requests after the kernel has been marked dead via
     CACHEFILES_DEAD to avoid hung-tasks
   - Ensure that closed requests are marked as such to avoid reusing
     them with a reopen request
   - Defer fd_install() until after copy_to_user() succeeded and thereby
     get rid of having to use close_fd()
   - Ensure that anonymous cachefiles on-demand fds are reused while
     they are valid to avoid pinning already freed cookies"

* tag 'vfs-6.10-rc4.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
  iomap: Fix iomap_adjust_read_range for plen calculation
  iomap: keep on increasing i_size in iomap_write_end()
  cachefiles: remove unneeded include of <linux/fdtable.h>
  fs/file: fix the check in find_next_fd()
  cachefiles: make on-demand read killable
  cachefiles: flush all requests after setting CACHEFILES_DEAD
  cachefiles: Set object to close if ondemand_id < 0 in copen
  cachefiles: defer exposing anon_fd until after copy_to_user() succeeds
  cachefiles: never get a new anonymous fd if ondemand_id is valid
  cachefiles: add spin_lock for cachefiles_ondemand_info
  cachefiles: add consistency check for copen/cread
  cachefiles: remove err_put_fd label in cachefiles_ondemand_daemon_read()
  cachefiles: fix slab-use-after-free in cachefiles_ondemand_daemon_read()
  cachefiles: fix slab-use-after-free in cachefiles_ondemand_get_fd()
  cachefiles: remove requests from xarray during flushing requests
  cachefiles: add output string to cachefiles_obj_[get|put]_ondemand_fd
  statx: Update offset commentary for struct statx
  netfs: fix kernel doc for nets_wait_for_outstanding_io()
  debugfs: continue to ignore unknown mount options

netfilter: Use flowlabel flow key when re-routing mangled packets

'ip6 dscp set $v' in an nftables outpute route chain has no effect.
While nftables does detect the dscp change and calls the reroute hook.
But ip6_route_me_harder never sets the dscp/flowlabel:
flowlabel/dsfield routing rules are ignored and no reroute takes place.

Thanks to Yi Chen for an excellent reproducer script that I used
to validate this change.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Yi Chen <yiche@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: ipset: Fix race between namespace cleanup and gc in the list:set type

Lion Ackermann reported that there is a race condition between namespace cleanup
in ipset and the garbage collection of the list:set type. The namespace
cleanup can destroy the list:set type of sets while the gc of the set type is
waiting to run in rcu cleanup. The latter uses data from the destroyed set which
thus leads use after free. The patch contains the following parts:

- When destroying all sets, first remove the garbage collectors, then wait
  if needed and then destroy the sets.
- Fix the badly ordered "wait then remove gc" for the destroy a single set
  case.
- Fix the missing rcu locking in the list:set type in the userspace test
  case.
- Use proper RCU list handlings in the list:set type.

The patch depends on c1193d9bbbd3 (netfilter: ipset: Add list flush to cancel_gc).

Fixes: 97f7cf1cd80e (netfilter: ipset: fix performance regression in swap operation)
Reported-by: Lion Ackermann <nnamrec@gmail.com>
Tested-by: Lion Ackermann <nnamrec@gmail.com>
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: nft_inner: validate mandatory meta and payload

Check for mandatory netlink attributes in payload and meta expression
when used embedded from the inner expression, otherwise NULL pointer
dereference is possible from userspace.

Fixes: a150d122b6bd ("netfilter: nft_meta: add inner match support")
Fixes: 3a07327d10a0 ("netfilter: nft_inner: support for inner tunnel header matching")
Signed-off-by: Davide Ornaghi <d.ornaghi97@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

tcp: use signed arithmetic in tcp_rtx_probe0_timed_out()

Due to timer wheel implementation, a timer will usually fire
after its schedule.

For instance, for HZ=1000, a timeout between 512ms and 4s
has a granularity of 64ms.
For this range of values, the extra delay could be up to 63ms.

For TCP, this means that tp->rcv_tstamp may be after
inet_csk(sk)->icsk_timeout whenever the timer interrupt
finally triggers, if one packet came during the extra delay.

We need to make sure tcp_rtx_probe0_timed_out() handles this case.

Fixes: e89688e3e978 ("net: tcp: fix unexcepted socket die when snd_wnd is 0")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Menglong Dong <imagedong@tencent.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://lore.kernel.org/r/20240607125652.1472540-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'mptcp-various-fixes'

Matthieu Baerts says:

====================
mptcp: various fixes

The different patches here are some unrelated fixes for MPTCP:

- Patch 1 ensures 'snd_una' is initialised on connect in case of MPTCP
  fallback to TCP followed by retransmissions before the processing of
  any other incoming packets. A fix for v5.9+.

- Patch 2 makes sure the RmAddr MIB counter is incremented, and only
  once per ID, upon the reception of a RM_ADDR. A fix for v5.10+.

- Patch 3 doesn't update 'add addr' related counters if the connect()
  was not possible. A fix for v5.7+.

- Patch 4 updates the mailmap file to add Geliang's new email address.
====================

Link: https://lore.kernel.org/r/20240607-upstream-net-20240607-misc-fixes-v1-0-1ab9ddfa3d00@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mailmap: map Geliang's new email address

Just like my other email addresses, map my new one to kernel.org
account too.

My new email address uses "last name, first name" format, which is
different from my other email addresses. This mailmap is also used
to indicate that it is actually the same person.

Suggested-by: Mat Martineau <martineau@kernel.org>
Suggested-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Geliang Tang <geliang@kernel.org>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240607-upstream-net-20240607-misc-fixes-v1-4-1ab9ddfa3d00@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mptcp: pm: update add_addr counters after connect

The creation of new subflows can fail for different reasons. If no
subflow have been created using the received ADD_ADDR, the related
counters should not be updated, otherwise they will never be decremented
for events related to this ID later on.

For the moment, the number of accepted ADD_ADDR is only decremented upon
the reception of a related RM_ADDR, and only if the remote address ID is
currently being used by at least one subflow. In other words, if no
subflow can be created with the received address, the counter will not
be decremented. In this case, it is then important not to increment
pm.add_addr_accepted counter, and not to modify pm.accept_addr bit.

Note that this patch does not modify the behaviour in case of failures
later on, e.g. if the MP Join is dropped or rejected.

The "remove invalid addresses" MP Join subtest has been modified to
validate this case. The broadcast IP address is added before the "valid"
address that will be used to successfully create a subflow, and the
limit is decreased by one: without this patch, it was not possible to
create the last subflow, because:

- the broadcast address would have been accepted even if it was not
usable: the creation of a subflow to this address results in an error,

- the limit of 2 accepted ADD_ADDR would have then been reached.

Fixes: 01cacb00b35c ("mptcp: add netlink-based PM")
Cc: stable@vger.kernel.org
Co-developed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: YonglongLi <liyonglong@chinatelecom.cn>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240607-upstream-net-20240607-misc-fixes-v1-3-1ab9ddfa3d00@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mptcp: pm: inc RmAddr MIB counter once per RM_ADDR ID

The RmAddr MIB counter is supposed to be incremented once when a valid
RM_ADDR has been received. Before this patch, it could have been
incremented as many times as the number of subflows connected to the
linked address ID, so it could have been 0, 1 or more than 1.

The "RmSubflow" is incremented after a local operation. In this case,
it is normal to tied it with the number of subflows that have been
actually removed.

The "remove invalid addresses" MP Join subtest has been modified to
validate this case. A broadcast IP address is now used instead: the
client will not be able to create a subflow to this address. The
consequence is that when receiving the RM_ADDR with the ID attached to
this broadcast IP address, no subflow linked to this ID will be found.

Fixes: 7a7e52e38a40 ("mptcp: add RM_ADDR related mibs")
Cc: stable@vger.kernel.org
Co-developed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: YonglongLi <liyonglong@chinatelecom.cn>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240607-upstream-net-20240607-misc-fixes-v1-2-1ab9ddfa3d00@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mptcp: ensure snd_una is properly initialized on connect

This is strictly related to commit fb7a0d334894 ("mptcp: ensure snd_nxt
is properly initialized on connect"). It turns out that syzkaller can
trigger the retransmit after fallback and before processing any other
incoming packet - so that snd_una is still left uninitialized.

Address the issue explicitly initializing snd_una together with snd_nxt
and write_seq.

Suggested-by: Mat Martineau <martineau@kernel.org>
Fixes: 8fd738049ac3 ("mptcp: fallback in case of simultaneous connect")
Cc: stable@vger.kernel.org
Reported-by: Christoph Paasch <cpaasch@apple.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/485
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240607-upstream-net-20240607-misc-fixes-v1-1-1ab9ddfa3d00@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/sched: initialize noop_qdisc owner

When the noop_qdisc owner isn't initialized, then it will be 0,
so packets will erroneously be regarded as having been subject
to recursion as long as only CPU 0 queues them. For non-SMP,
that's all packets, of course. This causes a change in what's
reported to userspace, normally noop_qdisc would drop packets
silently, but with this change the syscall returns -ENOBUFS if
RECVERR is also set on the socket.

Fix this by initializing the owner field to -1, just like it
would be for dynamically allocated qdiscs by qdisc_alloc().

Fixes: 0f022d32c3ec ("net/sched: Fix mirred deadlock on device recursion")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240607175340.786bfb938803.I493bf8422e36be4454c08880a8d3703cea8e421a@changeid
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

bcachefs: Add missing bch_inode_info.ei_flags init

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Add missing synchronize_srcu_expedited() call when shutting down

We use the polling interface to srcu for tracking pending frees; when
shutting down we don't need to wait for an srcu barrier to free them,
but SRCU still gets confused if we shutdown with an outstanding grace
period.

Reported-by: syzbot+6a038377f0a594d7d44e@syzkaller.appspotmail.com
Reported-by: syzbot+0ece6edfd05ed20e32d9@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Check for invalid bucket from bucket_gen(), gc_bucket()

Turn more asserts into proper recoverable error paths.

Reported-by: syzbot+246b47da27f8e7e7d6fb@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Replace bucket_valid() asserts in bucket lookup with proper checks

The bucket_gens array and gc_buckets array known their own size; we
should be using those members, and returning an error.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Fix snapshot_create_lock lock ordering

======================================================
WARNING: possible circular locking dependency detected
6.10.0-rc2-ktest-00018-gebd1d148b278 #144 Not tainted
------------------------------------------------------
fio/1345 is trying to acquire lock:
ffff88813e200ab8 (&c->snapshot_create_lock){++++}-{3:3}, at: bch2_truncate+0x76/0xf0

but task is already holding lock:
ffff888105a1fa38 (&sb->s_type->i_mutex_key#13){+.+.}-{3:3}, at: do_truncate+0x7b/0xc0

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #2 (&sb->s_type->i_mutex_key#13){+.+.}-{3:3}:
       down_write+0x3d/0xd0
       bch2_write_iter+0x1c0/0x10f0
       vfs_write+0x24a/0x560
       __x64_sys_pwrite64+0x77/0xb0
       x64_sys_call+0x17e5/0x1ab0
       do_syscall_64+0x68/0x130
       entry_SYSCALL_64_after_hwframe+0x4b/0x53

-> #1 (sb_writers#10){.+.+}-{0:0}:
       mnt_want_write+0x4a/0x1d0
       filename_create+0x69/0x1a0
       user_path_create+0x38/0x50
       bch2_fs_file_ioctl+0x315/0xbf0
       __x64_sys_ioctl+0x297/0xaf0
       x64_sys_call+0x10cb/0x1ab0
       do_syscall_64+0x68/0x130
       entry_SYSCALL_64_after_hwframe+0x4b/0x53

-> #0 (&c->snapshot_create_lock){++++}-{3:3}:
       __lock_acquire+0x1445/0x25b0
       lock_acquire+0xbd/0x2b0
       down_read+0x40/0x180
       bch2_truncate+0x76/0xf0
       bchfs_truncate+0x240/0x3f0
       bch2_setattr+0x7b/0xb0
       notify_change+0x322/0x4b0
       do_truncate+0x8b/0xc0
       do_ftruncate+0x110/0x270
       __x64_sys_ftruncate+0x43/0x80
       x64_sys_call+0x1373/0x1ab0
       do_syscall_64+0x68/0x130
       entry_SYSCALL_64_after_hwframe+0x4b/0x53

other info that might help us debug this:

Chain exists of:
  &c->snapshot_create_lock --> sb_writers#10 --> &sb->s_type->i_mutex_key#13

Possible unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(&sb->s_type->i_mutex_key#13);
                               lock(sb_writers#10);
                               lock(&sb->s_type->i_mutex_key#13);
  rlock(&c->snapshot_create_lock);

*** DEADLOCK ***

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Fix refcount leak in check_fix_ptrs()

fsck_err() does a goto fsck_err on error; factor out check_fix_ptr() so
that our error label can drop our device ref.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Leave a buffer in the btree key cache to avoid lock thrashing

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Fix reporting of freed objects from key cache shrinker

We count objects as freed when we move them to the srcu-pending lists
because we're doing the equivalent of a kfree_srcu(); the only
difference is managing the pending list ourself means we can allocate
from the pending list.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: set sb->s_shrinker->seeks = 0

inodes and dentries are still present in the btree node cache, in much
more compact form

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: increase key cache shrinker batch size

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Enable automatic shrinking for rhashtables

Since the key cache shrinker walks the rhashtable, a mostly empty
rhashtable leads to really nasty reclaim performance issues.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: fix the display format for show-super

There are three keys displayed in non-uniform format.
Let's fix them.

[Before]
```
Label: testbcachefs
Version: 1.9: (unknown version)
Version upgrade complete: 0.0: (unknown version)
```

[After]
```
Label: testbcachefs
Version: 1.9: (unknown version)
Version upgrade complete: 0.0: (unknown version)
```

Fixes: 7423330e30ab ("bcachefs: prt_printf() now respects \r\n\t")
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: fix stack frame size in fsck.c

fsck.c always runs top of the stack so we're not too concerned here;
noinline_for_stack is sufficient

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>