arm64: dts: qcom: x1e80100: Add TCSR node

Add the TCSR clock controller and register space node.

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240129-x1e80100-dts-missing-nodes-v6-5-2c0e691cfa3b@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: x1e80100: Add ADSP/CDSP remoteproc nodes

Add ADSP and CDSP remoteproc nodes on X1E80100 platforms.

Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20240129-x1e80100-dts-missing-nodes-v6-4-2c0e691cfa3b@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: x1e80100: Add QMP AOSS node

Add a node for the QMP AOSS.

Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20240129-x1e80100-dts-missing-nodes-v6-3-2c0e691cfa3b@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: x1e80100: Add SMP2P nodes

SMP2P is used for interrupting and being interrupted about remoteproc
state changes related to the audio, compute and sensor subsystems.

Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20240129-x1e80100-dts-missing-nodes-v6-2-2c0e691cfa3b@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: x1e80100: Add IPCC node

Add the IPCC node, used to send and receive IPC signals with
remoteprocs.

Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20240129-x1e80100-dts-missing-nodes-v6-1-2c0e691cfa3b@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

Merge branch '20240202-x1e80100-clock-controllers-v4-5-7fb08c861c7c@linaro.org' into arm64-for-6.9

Merge the X1E clock binding topic branch, to gain access to the many
clock defines.

dt-bindings: clock: qcom: Document the X1E80100 Camera Clock Controller

Add bindings documentation for the X1E80100 Camera Clock Controller.

Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20240202-x1e80100-clock-controllers-v4-5-7fb08c861c7c@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

dt-bindings: clock: qcom: Document the X1E80100 TCSR Clock Controller

Add bindings documentation for the X1E80100 TCSR Clock Controller.

Co-developed-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20240202-x1e80100-clock-controllers-v4-4-7fb08c861c7c@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

dt-bindings: clock: qcom: Document the X1E80100 GPU Clock Controller

Add bindings documentation for the X1E80100 Graphics Clock Controller.

Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20240202-x1e80100-clock-controllers-v4-3-7fb08c861c7c@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

dt-bindings: clock: qcom: Document the X1E80100 Display Clock Controller

Add bindings documentation for the X1E80100 Display Clock Controller.

Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20240202-x1e80100-clock-controllers-v4-2-7fb08c861c7c@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

dt-bindings: clock: Drop the SM8650 DISPCC dedicated schema

The block is the same between these platforms, at least from devicetree
point of view. So drop the dedicated schema and use the SM8550 one instead.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20240202-x1e80100-clock-controllers-v4-1-7fb08c861c7c@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sa8775p: Add new memory map updates to SA8775P

New memory map layout changes (by Qualcomm firmware) have brought
in updates to base addresses and/or size for different memory regions
like cpcucp_fw, tz-stat, and also introduces new memory regions for
resource manager firmware. The updated memory map also fixes existing
issues pertaining to boot up failure while running memtest, thus
improving stability.

This change brings in these corresponding memory map updates to the
device tree for SA8775P SoC platform, which currently is in its
development stage.

Signed-off-by: Ninad Naik <quic_ninanaik@quicinc.com>
Tested-by: Eric Chanudet <echanude@redhat.com> # sa8775p-ride
Link: https://lore.kernel.org/r/20240125055134.7015-1-quic_ninanaik@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: qcm6490-idp: Include PM7250B

Include PM7250B PMIC for qcm6490-idp.

Signed-off-by: Umang Chheda <quic_uchheda@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240125115300.3496783-1-quic_uchheda@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8650: Use GIC-ITS for PCIe0 and PCIe1

Both PCIe0 and PCIe1 controllers are capable of signalling the MSIs
received from endpoint devices to the CPU using GIC-ITS MSI controller.
Add support for it.

The GIC-ITS MSI implementation provides an advantage over internal MSI
implementation using Locality-specific Peripheral Interrupts (LPI) that
would allow MSIs to be targeted for each CPU core.

Like SM8450 & SM8550, the IDs are swapped, but works fine on PCIe0 and PCIe1.

WiFi PCIe Device on SM8650-QRD using GIC-ITS:
159:          0          0          0          0          0          0          0          0   ITS-MSI   0 Edge      PCIe PME, aerdrv
167:          0          4          0          0          0          0          0          0   ITS-MSI 524288 Edge      bhi
168:          0          0          4          0          0          0          0          0   ITS-MSI 524289 Edge      mhi
169:          0          0          0         34          0          0          0          0   ITS-MSI 524290 Edge      mhi
170:          0          0          0          0          3          0          0          0   ITS-MSI 524291 Edge      ce0
171:          0          0          0          0          0          2          0          0   ITS-MSI 524292 Edge      ce1
172:          0          0          0          0          0          0        806          0   ITS-MSI 524293 Edge      ce2
173:          0          0          0          0          0          0          0         76   ITS-MSI 524294 Edge      ce3
174:          0          0          0          0          0          0          0          0   ITS-MSI 524295 Edge      ce5
175:          0         13          0          0          0          0          0          0   ITS-MSI 524296 Edge      DP_EXT_IRQ
176:          0          0          0          0          0          0          0          0   ITS-MSI 524297 Edge      DP_EXT_IRQ
177:          0          0          0       5493          0          0          0          0   ITS-MSI 524298 Edge      DP_EXT_IRQ
178:          0          0          0          0         82          0          0          0   ITS-MSI 524299 Edge      DP_EXT_IRQ
179:          0          0          0          0          0       7204          0          0   ITS-MSI 524300 Edge      DP_EXT_IRQ
180:          0          0          0          0          0          0        672          0   ITS-MSI 524301 Edge      DP_EXT_IRQ
181:          0          0          0          0          0          0          0         30   ITS-MSI 524302 Edge      DP_EXT_IRQ

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240125-topic-sm8650-upstream-pcie-its-v1-1-cb506deeb43e@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: qcm6490-idp: Add definition for three LEDs

Add definition for three LEDs to make sure they can
be enabled base on QCOM LPG LED driver.

Signed-off-by: Hui Liu <quic_huliu@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240126-lpg-v6-1-f879cecbce69@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8650-qrd: add USB-C Altmode Support

Add the necessary nodes to support the USB-C Altmode path by
adding the following
- WCD939x USBSS Mux I2C device
- nb7vpq904m Redriver I2C device
- Port/Endpoint graph links bettween PMIC-Glink, Mux, Redriver and USB PHY nodes.

WCD939x USBSS port 2 Path to Codec will be added later when Audio support
is added.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240123-topic-sm8650-upstream-altmode-v3-1-300a5ac80e1e@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8550-qrd: enable Touchscreen

Add Goodix Berlin touchscreen controller node for the SM8550 QRD
connected to the SPI4 controller.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240131-topic-sm8550-upstream-qrd8550-touch-v1-1-007f61158aa8@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: Add support for Xiaomi Redmi Note 9S

Add a device tree for the Xiaomi Redmi Note 9S (curtana) phone, based on
sm7125-xiaomi-common.dtsi.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Joe Mason <buddyjojo06@outlook.com>
Signed-off-by: David Wronek <davidwronek@gmail.com>
Link: https://lore.kernel.org/r/20240121-sm7125-upstream-v4-8-f7d1212c8ebb@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm7125-xiaomi-common: Add UFS nodes

Enable the UFS found on the SM7125 Xiaomi smartphones.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: David Wronek <davidwronek@gmail.com>
Link: https://lore.kernel.org/r/20240121-sm7125-upstream-v4-7-f7d1212c8ebb@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sc7180: Add UFS nodes

Add the UFS, QMP PHY and ICE nodes for the Qualcomm SC7180 SoC.

Signed-off-by: David Wronek <davidwronek@gmail.com>
Link: https://lore.kernel.org/r/20240121-sm7125-upstream-v4-6-f7d1212c8ebb@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

dt-bindings: arm: qcom: Add Xiaomi Redmi Note 9S

Document the Xiaomi Redmi Note 9S (curtana) smartphone, which is based
on the Qualcomm SM7125 SoC.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David Wronek <davidwronek@gmail.com>
Link: https://lore.kernel.org/r/20240121-sm7125-upstream-v4-4-f7d1212c8ebb@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sda660-ifc6560: enable USB 3.0 PHY

The Inforce IFC6560 board actually has USB SS lines routed to the USB-C
connector. Enable USB 3.0 PHY and SS mode for the USB3 host.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240116-sdm660-usb3-support-v1-4-2fbd683aea77@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sdm630: add USB QMP PHY support

Define USB3 QMP PHY presend on the SDM630 / SDM660 platforms. Enable it by
default in the USB3 host, but (for compatibility), force USB 2.0 mode
for all defined boards. The boards should opt-in to enable USB 3.0
support.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240116-sdm660-usb3-support-v1-3-2fbd683aea77@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sc8280xp: camss: Add CAMSS block definition

Add CAMSS block definition for sc8280xp.

This drop contains definitions for the following components on sc8280xp:

VFE * 4
VFE Lite * 4
CSID * 4
CSIPHY * 4

This dtsi definition has been developed and validated on a Lenovo X13s
laptop.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20240111-linux-next-24-01-02-sc8280xp-camss-core-dtsi-v4-4-cdd5c57ff1dc@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sc8280xp: camss: Add CCI definitions

sc8280xp has four Camera Control Interface (CCI) blocks which pinout to
two I2C master controllers for each CCI.

The CCI I2C pins are not muxed so we define them in the dtsi.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20240111-linux-next-24-01-02-sc8280xp-camss-core-dtsi-v4-3-cdd5c57ff1dc@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sa8295p-adp: Enable GPU

With the necessary support in place for supplying VDD_GFX from the
MAX20411 regulator, enable the GPU clock controller, GMU, Adreno SMMU
and the GPU on the SA8295P ADP.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Link: https://lore.kernel.org/r/20240125-sa8295p-gpu-v4-7-7011c2a63037@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sa8295p-adp: add max20411

The SA8295P ADP has a MAX20411 LDO regulator on I2C 12, supplying the
VDD_GFX pads. Enable the bus and add the maxim,max20411 device on the
bus.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240125-sa8295p-gpu-v4-6-7011c2a63037@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sa8540p: Drop gfx.lvl as power-domain for gpucc

The SA8295P and SA8540P uses an external regulator (max20411), and
gfx.lvl is not provided by rpmh. Drop the power-domains property of the
gpucc node to reflect this.

Fixes: eec51ab2fd6f ("arm64: dts: qcom: sc8280xp: Add GPU related nodes")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Link: https://lore.kernel.org/r/20240125-sa8295p-gpu-v4-5-7011c2a63037@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm7225-fairphone-fp4: Switch firmware ext to .mbn

Specify the file name for the squashed/non-split firmware with the .mbn
extension instead of the split .mdt. The kernel can load both but the
squashed version is preferred in dts nowadays.

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240110-fp4-mbn-v1-1-45e7e33b1834@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: rename PM2250 to PM4125

It seems, the only actual mentions of PM2250 can be found are related to
the Qualcomm RB1 platform. However even RB1 schematics use PM4125 as a
PMIC name. Rename PM2250 to PM4125 to follow the documentation.

Note, this doesn't change the compatible strings. There was a previous
argument regarding renaming of compat strings.

Fixes: c309b9a54039 ("arm64: dts: qcom: Add initial PM2250 device tree")
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240128-pm2250-pm4125-rename-v2-2-d51987e9f83a@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: qcm6490-fairphone-fp5: Add PMIC GLINK

Via the PMIC GLINK driver we can get info about fuel gauge, charger and
USB connector events. Add the node to the dts and configure USB so that
role switching works.

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20231220-fp5-pmic-glink-v1-3-2a1f8e3c661c@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sdm845-oneplus-common: improve DAI node naming

Make it easier to understand what the reg in those nodes is by using the
constants provided by qcom,q6dsp-lpass-ports.h.

Name nodes according to dt-binding expectations.

Fix for
```
arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dtb: service@4: dais: Unevaluated properties are not allowed ('qi2s@22', 'qi2s@23' were unexpected)
```

Fixes: b7b734286856 ("arm64: dts: qcom: sdm845-oneplus-*: add audio devices")
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Luca Weiss <luca@z3ntu.xyz>
Link: https://lore.kernel.org/r/20231229200245.259689-1-david@ixit.cz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: qcm6490-fairphone-fp5: Add missing reserved-memory

It seems we also need to reserve a region of 81 MiB called "removed_mem"
otherwise we can easily hit the following error with higher RAM usage:

  [ 1467.809274] Internal error: synchronous external abort: 0000000096000010 [#2] SMP

Fixes: eee9602ad649 ("arm64: dts: qcom: qcm6490: Add device-tree for Fairphone 5")
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231229-fp5-reserved-mem-v1-1-87bb818f1397@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sc7280: Add static properties to cryptobam

When the properties num-channels & qcom,num-ees are not specified, the
driver tries to read the values from registers, but this read fails and
resets the device if the interconnect from the qcom,qce node is not
already active when that happens.

Add the static properties to not touch any registers during probe, the
rest of the time when the BAM is used by QCE then the interconnect will
be active already.

Fixes: d488f903a860 ("arm64: dts: qcom: sc7280: add QCrypto nodes")
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20231229-sc7280-cryptobam-fixup-v1-1-bd8f68589b80@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sa8775p: enable safety IRQ

Add changes to support safety IRQ handling
support for ethernet.

Signed-off-by: Suraj Jaiswal <quic_jsuraj@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240110111649.2256450-3-quic_jsuraj@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: apq8016-sbc-d3-camera: Use more generic node names

Add "regulator" to the node names of the fixed regulators, and drop the
"_rear" part of the camera node name since it is not part of the class
of the device (which is simply "camera").

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20230922-apq8016-sbc-camera-dtso-v1-1-ce9451895ca1@gerhold.net
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: split PCIe interrupt-names entries per lines

Other PCIe nodes in SM8250 and SM8350 have one interrupt name per
line, so adjust PCIe0 to match the style.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240126-b4-dt-bindings-pci-qcom-split-dts-v2-7-0bb067f73adb@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8650: describe all PCI MSI interrupts

Each group of MSI interrupts is mapped to the separate host interrupt.
Describe each of interrupts in the device tree for PCIe hosts.  Not
tested on hardware.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-QRD
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240126-b4-dt-bindings-pci-qcom-split-dts-v2-6-0bb067f73adb@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8550: describe all PCI MSI interrupts

Each group of MSI interrupts is mapped to the separate host interrupt.
Describe each of interrupts in the device tree for PCIe hosts.  Only
boot tested on hardware.

Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240126-b4-dt-bindings-pci-qcom-split-dts-v2-5-0bb067f73adb@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8450: describe all PCI MSI interrupts

Each group of MSI interrupts is mapped to the separate host interrupt.
Describe each of interrupts in the device tree for PCIe hosts.  Only
boot tested on hardware.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240126-b4-dt-bindings-pci-qcom-split-dts-v2-4-0bb067f73adb@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8350: describe all PCI MSI interrupts

Each group of MSI interrupts is mapped to the separate host interrupt.
Describe each of interrupts in the device tree for PCIe hosts.  Not
tested on hardware.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240126-b4-dt-bindings-pci-qcom-split-dts-v2-3-0bb067f73adb@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8250: describe all PCI MSI interrupts

Each group of MSI interrupts is mapped to the separate host interrupt.
Describe each of interrupts in the device tree for PCIe hosts.  Not
tested on hardware.

PCIe0 was done already in commit f2819650aab5 ("arm64: dts: qcom:
sm8250: provide additional MSI interrupts").

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240126-b4-dt-bindings-pci-qcom-split-dts-v2-2-0bb067f73adb@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8150: describe all PCI MSI interrupts

Each group of MSI interrupts is mapped to the separate host interrupt.
Describe each of interrupts in the device tree for PCIe hosts.  Not
tested on hardware.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240126-b4-dt-bindings-pci-qcom-split-dts-v2-1-0bb067f73adb@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8450: Add missing interconnects to serial

The serial ports did not have their interconnect paths specified when
they were first introduced. Fix that.

Fixes: 5188049c9b36 ("arm64: dts: qcom: Add base SM8450 DTSI")
Fixes: f5837418479a ("arm64: dts: qcom: sm8450: add uart20 node")
Reported-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Suggested-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240116-topic-8450serial-v1-1-b685e6a5ad78@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

dt-bindings: qcom: Document new msm8916-samsung devices

Document the new following device tree bindings used in their
device trees:

- samsung,fortuna3g
- samsung,gprimeltecan
- samsung,grandprimelte
- samsung,rossa

Signed-off-by: Raymond Hackley <raymondhackley@protonmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20240120095715.13689-2-raymondhackley@protonmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8450-hdk: correct AMIC4 and AMIC5 microphones

Due to lack of documentation the AMIC4 and AMIC5 analogue microphones
were never actually working, so the audio routing for them was added
hoping it is correct.  It turned out not correct - their routing should
point to SWR_INPUT0 (so audio mixer TX SMIC MUX0 = SWR_MIC0) and
SWR_INPUT1 (so audio mixer TX SMIC MUX0 = SWR_MIC1), respectively.  With
proper mixer settings and fixed LPASS TX macr codec TX SMIC MUXn
widgets, this makes all microphones working on HDK8450.

Cc: stable@vger.kernel.org
Fixes: f20cf2bc3f77 ("arm64: dts: qcom: sm8450-hdk: add other analogue microphones")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240124121855.162730-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8150: add necessary ref clock to PCIe

The PCIe nodes should get the ref clock, according to information from
Qualcomm.

Link: https://lore.kernel.org/all/20231121065440.GB3315@thinkpad/
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231208105155.36097-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sdm630: Hook up GPU cooling device

In order to allow for throttling the GPU, hook up the cooling device
to the respective thermal zones.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240102-topic-gpu_cooling-v1-12-fda30c57e353@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8550: Hook up GPU cooling device

In order to allow for throttling the GPU, hook up the cooling device
to the respective thermal zones. Also, unify the naming scheme of the
thermal zones across the tree while at it.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240102-topic-gpu_cooling-v1-11-fda30c57e353@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8450: Hook up GPU cooling device

In order to allow for throttling the GPU, hook up the cooling device
to the respective thermal zones. Also, update the trip point label
to be more telling, while at it.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240102-topic-gpu_cooling-v1-10-fda30c57e353@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8350: Hook up GPU cooling device

In order to allow for throttling the GPU, hook up the cooling device
to the respective thermal zones. Also, update the trip point label
to be more telling, while at it.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240102-topic-gpu_cooling-v1-9-fda30c57e353@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8250: Hook up GPU cooling device

In order to allow for throttling the GPU, hook up the cooling device
to the respective thermal zones. Also, update the trip point label
to be more telling, while at it.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240102-topic-gpu_cooling-v1-8-fda30c57e353@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8150: Hook up GPU cooling device

In order to allow for throttling the GPU, hook up the cooling device
to the respective thermal zones. Also, update the trip point label
to be more telling, while at it.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240102-topic-gpu_cooling-v1-7-fda30c57e353@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm6115: Mark GPU @ 125C critical

If the GPU ever reaches this temperature, the "critical" signal shuold
definitely be propagated. Fix the wrong type.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240102-topic-gpu_cooling-v1-6-fda30c57e353@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm6115: Hook up GPU cooling device

In order to allow for throttling the GPU, hook up the cooling device
to the respective thermal zones.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240102-topic-gpu_cooling-v1-5-fda30c57e353@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sdm845: Hook up GPU cooling device

In order to allow for throttling the GPU, hook up the cooling device
to the respective thermal zones.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240102-topic-gpu_cooling-v1-4-fda30c57e353@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sc8180x: Hook up GPU cooling device

In order to allow for throttling the GPU, hook up the cooling device
to the respective thermal zones.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240102-topic-gpu_cooling-v1-3-fda30c57e353@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: msm8939: Hook up GPU cooling device

In order to allow for throttling the GPU, hook up the cooling device
to the respective thermal zones.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240102-topic-gpu_cooling-v1-2-fda30c57e353@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: msm8916: Hook up GPU cooling device

In order to allow for throttling the GPU, hook up the cooling device
to the respective thermal zones.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240102-topic-gpu_cooling-v1-1-fda30c57e353@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: x1e80100: Flush RSC sleep & wake votes

The RPMh driver will cache sleep and wake votes until the cluster
power-domain is about to enter idle, to avoid unnecessary writes. So
associate the apps_rsc with the cluster pd, so that it can be notified
about this event.

Without this, only AMC votes are being committed.

Fixes: af16b00578a7 ("arm64: dts: qcom: Add base X1E80100 dtsi and the QCP dts")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20240102-topic-x1e_fixes-v1-4-70723e08d5f6@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: x1e80100: Add missing system-wide PSCI power domain

Previous Qualcomm SoCs over the past couple years have used the Arm DSU
architecture, which basically unified the meaning of the "cluster" and
"system". This is however clearly not the case on X1E, as can be seen
by three separate cluster power domains.

Add the lacking system-level power domain. For now it's going to be
always-on, as no system-wide idle states are defined at the moment.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20240102-topic-x1e_fixes-v1-3-70723e08d5f6@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: Add missing interrupts for qcs404/ipq5332

For qcs404 and ipq5332, certain interrupts are missing in DT.
Add them to ensure they are in accordance to bindings.

The interrupts added enable remote wakeup functionality for these SoCs.

Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Link: https://lore.kernel.org/r/20240125185921.5062-5-quic_kriskura@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: Fix hs_phy_irq for SDM670/SDM845/SM6350

For sm6350/sdm670/sdm845, although they are qusb2 phy targets, dp/dm
interrupts are used for wakeup instead of qusb2_phy irq. These targets
were part of a generation that were the last ones to implement QUSB2 PHY
and the design incorporated dedicated DP/DM interrupts which eventually
carried forward to the newer femto based targets.

Add the missing pwr_event irq for these targets. Also modify order of
interrupts in accordance to bindings update. Modifying the order of these
interrupts is harmless as the driver tries to get these interrupts from DT
by name and not by index.

Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Link: https://lore.kernel.org/r/20240125185921.5062-4-quic_kriskura@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: Fix hs_phy_irq for non-QUSB2 targets

On non-QUSB2 targets (like the ones that use femto phys, M31 phy, eusb2
phy), many of the QCOM DTs are missing the IRQ for either hs_phy_irq or
pwr_event. In one case, the hs_phy_irq was incorrectly defined with the
latter's IRQ number. Since the DT must describe the hw whether or not
the driver uses these interrupts, fix and add the missing entries in order
to describe the HW completely and accurately.

Also modify order of interrupts in accordance to bindings update.

Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Link: https://lore.kernel.org/r/20240125185921.5062-3-quic_kriskura@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: Fix hs_phy_irq for QUSB2 targets

On several QUSB2 Targets, the hs_phy_irq mentioned is actually
qusb2_phy interrupt specific to QUSB2 PHY's. Rename hs_phy_irq
to qusb2_phy for such targets.

In actuality, the hs_phy_irq is also present in these targets, but
kept in for debug purposes in hw test environments. This is not
triggered by default and its functionality is mutually exclusive
to that of qusb2_phy interrupt.

Add missing hs_phy_irq's, pwr_event irq's for QUSB2 PHY targets.
Add missing ss_phy_irq on some targets which allows for remote
wakeup to work on a Super Speed link.

Also modify order of interrupts in accordance to bindings update.
Since driver looks up for interrupts by name and not by index, it
is safe to modify order of these interrupts in the DT.

Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Link: https://lore.kernel.org/r/20240125185921.5062-2-quic_kriskura@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8550: add support for the SM8550-HDK board

The SM8550-HDK is an embedded development platforms for the
Snapdragon 8 Gen 2 SoC aka SM8550, with the following features:
- Qualcomm SM8550 SoC
- 16GiB On-board LPDDR5
- On-board WiFi 7 + Bluetooth 5.3/BLE
- On-board UFS4.0
- M.2 Key B+M Gen3x2 PCIe Slot
- HDMI Output
- USB-C Connector with DP Almode & Audio Accessory mode
- Micro-SDCard Slot
- Audio Jack with Playback and Microphone
- 2 On-board Analog microphones
- 2 On-board Speakers
- 96Boards Compatible Low-Speed and High-Speed connectors [1]
  - For Camera, Sensors and external Display cards
  - Compatible with the Linaro Debug board [2]
- SIM Slot for Modem
- Debug connectors
- 6x On-Board LEDs

Product Page: [3]

[1] https://www.96boards.org/specifications/
[2] https://git.codelinaro.org/linaro/qcomlt/debugboard
[3] https://www.lantronix.com/products/snapdragon-8-gen-2-mobile-hardware-development-kit/

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240125-topic-sm8550-upstream-hdk8550-v3-2-73bb5ef11cf8@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

dt-bindings: arm: qcom: Document the HDK8550 board

Document the Qualcomm SM8550 based HDK (Hardware Development Kit)
embedded development platform designed by Qualcomm and sold by Lantronix.

[1] https://www.lantronix.com/products/snapdragon-8-gen-2-mobile-hardware-development-kit/

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240125-topic-sm8550-upstream-hdk8550-v3-1-73bb5ef11cf8@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sc8180x: Add RPMh sleep stats

Add the sleep stats node to enable peeking at the power collapse reports
coming from the AOSS.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231230-topic-8180_more_fixes-v1-10-93b5c107ed43@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sc8180x: Shrink aoss_qmp register space size

The AOSS_QMP region is overallocated, bleeding into space that's supposed
to be used by other peripherals. Fix it.

Fixes: 8575f197b077 ("arm64: dts: qcom: Introduce the SC8180x platform")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231230-topic-8180_more_fixes-v1-9-93b5c107ed43@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sc8180x: Add missing CPU<->MDP_CFG path

To guarantee the required resources are enabled, describe the
interconnect path between the MDSS and the CPU.

Fixes: 494dec9b6f54 ("arm64: dts: qcom: sc8180x: Add display and gpu nodes")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231230-topic-8180_more_fixes-v1-8-93b5c107ed43@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sc8180x: Require LOW_SVS vote for MMCX if DISPCC is on

To ensure the PLLs are getting enough power, cast a vote with DISPCC so
that MMCX is at least at LOW_SVS.

Fixes: 494dec9b6f54 ("arm64: dts: qcom: sc8180x: Add display and gpu nodes")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231230-topic-8180_more_fixes-v1-7-93b5c107ed43@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sc8180x: Don't hold MDP core clock at FMAX

There's an OPP table to handle this, drop the permanent vote.

Fixes: 494dec9b6f54 ("arm64: dts: qcom: sc8180x: Add display and gpu nodes")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231230-topic-8180_more_fixes-v1-6-93b5c107ed43@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sc8180x: Fix eDP PHY power-domains

The (e)DP PHYs are powered by the MX line, not through the MDSS GDSC.
Fix that up.

Fixes: 494dec9b6f54 ("arm64: dts: qcom: sc8180x: Add display and gpu nodes")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231230-topic-8180_more_fixes-v1-5-93b5c107ed43@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sc8180x: Add missing CPU off state

The CPUs can be powered off without pulling the plug from the rest of
the system. Describe the idle state responsible for this.

Fixes: 8575f197b077 ("arm64: dts: qcom: Introduce the SC8180x platform")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231230-topic-8180_more_fixes-v1-4-93b5c107ed43@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sc8180x: Fix up big CPU idle state entry latency

The entry latency was oddly low.. Turns out somebody forgot about a
second '1'! Fix it.

Fixes: 8575f197b077 ("arm64: dts: qcom: Introduce the SC8180x platform")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231230-topic-8180_more_fixes-v1-3-93b5c107ed43@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sc8180x: Hook up VDD_CX as GCC parent domain

Most of GCC is powered by the CX rail. Describe that relationship to
let the performance state requests trickle up the chain.

Fixes: 8575f197b077 ("arm64: dts: qcom: Introduce the SC8180x platform")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231230-topic-8180_more_fixes-v1-2-93b5c107ed43@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

dt-bindings: clock: gcc-sc8180x: Add the missing CX power domain

The GCC block is (mostly) powered by the VDD_CX rail. Allow specifying
it in power-domains.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231230-topic-8180_more_fixes-v1-1-93b5c107ed43@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: qcm6490-fairphone-fp5: Enable venus node

Enable the venus node so that the video encoder/decoder will start
working.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20231201-sc7280-venus-pas-v3-3-bc132dc5fc30@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sc7280: Move video-firmware to chrome-common

If the video-firmware node is present, the venus driver assumes we're on
a system that doesn't use TZ for starting venus, like on ChromeOS
devices.

Move the video-firmware node to chrome-common.dtsi so we can use venus
on a non-ChromeOS devices. We also need to move the secure SID 0x2184
for iommu since (on some boards) we cannot touch that.

At the same time also disable the venus node by default in the dtsi,
like it's done on other SoCs.

Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Link: https://lore.kernel.org/r/20231201-sc7280-venus-pas-v3-2-bc132dc5fc30@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: x1e80100: drop qcom,drv-count

Property qcom,drv-count in the RSC node is not allowed and not used:

  x1e80100-crd.dtb: rsc@17500000: 'qcom,drv-count' does not match any of the regexes: '^regulators(-[0-9])?$', 'pinctrl-[0-9]+'

Fixes: af16b00578a7 ("arm64: dts: qcom: Add base X1E80100 dtsi and the QCP dts")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231218145050.66394-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sc7280: Add additional MSI interrupts

Current MSI's mapping doesn't have all the vectors. This platform
supports 8 vectors each vector supports 32 MSI's, so total MSI's
supported is 256.

Add all the MSI groups supported for this PCIe instance in this platform.

Fixes: 92e0ee9f83b3 ("arm64: dts: qcom: sc7280: Add PCIe and PHY related nodes")
cc: stable@vger.kernel.org
Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com>
Link: https://lore.kernel.org/r/20231218-additional_msi-v1-1-de6917392684@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

Linux 6.8-rc1

Merge tag 'bcachefs-2024-01-21' of https://evilpiepirate.org/git/bcachefs

Pull more bcachefs updates from Kent Overstreet:
 "Some fixes, Some refactoring, some minor features:

   - Assorted prep work for disk space accounting rewrite

   - BTREE_TRIGGER_ATOMIC: after combining our trigger callbacks, this
     makes our trigger context more explicit

   - A few fixes to avoid excessive transaction restarts on
     multithreaded workloads: fstests (in addition to ktest tests) are
     now checking slowpath counters, and that's shaking out a few bugs

   - Assorted tracepoint improvements

   - Starting to break up bcachefs_format.h and move on disk types so
     they're with the code they belong to; this will make room to start
     documenting the on disk format better.

   - A few minor fixes"

* tag 'bcachefs-2024-01-21' of https://evilpiepirate.org/git/bcachefs: (46 commits)
  bcachefs: Improve inode_to_text()
  bcachefs: logged_ops_format.h
  bcachefs: reflink_format.h
  bcachefs; extents_format.h
  bcachefs: ec_format.h
  bcachefs: subvolume_format.h
  bcachefs: snapshot_format.h
  bcachefs: alloc_background_format.h
  bcachefs: xattr_format.h
  bcachefs: dirent_format.h
  bcachefs: inode_format.h
  bcachefs; quota_format.h
  bcachefs: sb-counters_format.h
  bcachefs: counters.c -> sb-counters.c
  bcachefs: comment bch_subvolume
  bcachefs: bch_snapshot::btime
  bcachefs: add missing __GFP_NOWARN
  bcachefs: opts->compression can now also be applied in the background
  bcachefs: Prep work for variable size btree node buffers
  bcachefs: grab s_umount only if snapshotting
  ...

Merge tag 'timers-core-2024-01-21' of git://git./linux/kernel/git/tip/tip

Pull timer updates from Thomas Gleixner:
 "Updates for time and clocksources:

   - A fix for the idle and iowait time accounting vs CPU hotplug.

     The time is reset on CPU hotplug which makes the accumulated
     systemwide time jump backwards.

   - Assorted fixes and improvements for clocksource/event drivers"

* tag 'timers-core-2024-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  tick-sched: Fix idle and iowait sleeptime accounting vs CPU hotplug
  clocksource/drivers/ep93xx: Fix error handling during probe
  clocksource/drivers/cadence-ttc: Fix some kernel-doc warnings
  clocksource/drivers/timer-ti-dm: Fix make W=n kerneldoc warnings
  clocksource/timer-riscv: Add riscv_clock_shutdown callback
  dt-bindings: timer: Add StarFive JH8100 clint
  dt-bindings: timer: thead,c900-aclint-mtimer: separate mtime and mtimecmp regs

Merge tag 'powerpc-6.8-2' of git://git./linux/kernel/git/powerpc/linux

Pull powerpc fixes from Aneesh Kumar:

 - Increase default stack size to 32KB for Book3S

Thanks to Michael Ellerman.

* tag 'powerpc-6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/64s: Increase default stack size to 32KB

bcachefs: Improve inode_to_text()

Add line breaks - inode_to_text() is now much easier to read.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: logged_ops_format.h

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: reflink_format.h

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs; extents_format.h

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: ec_format.h

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: subvolume_format.h

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: snapshot_format.h

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: alloc_background_format.h

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: xattr_format.h

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: dirent_format.h

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: inode_format.h

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs; quota_format.h

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: sb-counters_format.h

bcachefs_format.h has gotten too big; let's do some organizing.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: counters.c -> sb-counters.c

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: comment bch_subvolume

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>