git.kernel.dk Git - linux-2.6-block.git/log

drm/ast: Distinguish among chip generations

ASpeed distinguishes among various generations of the AST graphics
chipset with various models. [1] The most-recent model AST 2600 is
of the 7th generation, the AST 2500 is of the 6th generation, and so
on.

The ast driver simply picks one of the models as representative for
the whole generation. In several places, individual models of the
same generation need to be handled differently, which then requires
additional code for detecting the model.

Introduce different generations of the Aspeed chipset. In the source
code, refer to the generation instead of the representation model where
possible. The few places that require per-model handling are now clearly
marked.

In the enum ast_chip, we arrange each model's value such that it
encodes the generation. This allows for an easy test. The actual values
are ordered, but not of interest to the driver.

v2:
* use __ast_gen_is_eq() (Jingfeng)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://web.archive.org/web/20141007093258/http://www.aspeedtech.com/products.php?fPath=20
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com> # AST2600
Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn>
Link: https://patchwork.freedesktop.org/patch/msgid/20230621130032.3568-10-tzimmermann@suse.de

drm/ast: Set up release action right after enabling MMIO

Ast sets up a managed release of the MMIO access flags. Move this
code next to the MMIO access code, so that it runs if other errors
occur during the device initialization.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Sui Jingfeng <suijingfeng@loongson.cn> # AST2400
Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com> # AST2600
Link: https://patchwork.freedesktop.org/patch/msgid/20230621130032.3568-9-tzimmermann@suse.de

drm/ast: Enable and unlock device access early during init

POST and memory management contains code to enable access to the
device's memory spaces. This is too late. Consolidate this code at
the beginning of the device initialization.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com> # AST2600
Link: https://patchwork.freedesktop.org/patch/msgid/20230621130032.3568-8-tzimmermann@suse.de

drm/ast: Set PCI config before accessing I/O registers

Access to I/O registers is required to detect and set up the
device. Enable the rsp PCI config bits before. While at it,
convert the magic number to macro constants.

Enabling the PCI config bits was done after trying to detect
the device. It was probably too late at this point.

v2:
* use standard 16-bit PCI r/w access (Jingfeng)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com> # AST2600
Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn>
Link: https://patchwork.freedesktop.org/patch/msgid/20230621130032.3568-7-tzimmermann@suse.de

drm/ast: Remove device POSTing and config from chip detection

There's way too much going on in ast_detect_chip(). Move the POST
and config code from the top of the function into the caller. No
functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com> # AST2600
Link: https://patchwork.freedesktop.org/patch/msgid/20230621130032.3568-6-tzimmermann@suse.de

drm/ast: Remove dead else branch in POST code

According to the chip detection in ast_detect_chip(), AST2300 and
later always have a PCI revision of 0x20 or higher. Therefore the
code in ast_set_def_ext_reg() can not use the else branch when
selecing the EXT register values. Remove the dead branch and the
related values.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com> # AST2600
Link: https://patchwork.freedesktop.org/patch/msgid/20230621130032.3568-5-tzimmermann@suse.de

drm/ast: Implement register helpers in ast_drv.h

There are already a number of register I/O functions in ast_drv.h.
For consistency, move the remaining functions there as well. No
functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com> # AST2600
Link: https://patchwork.freedesktop.org/patch/msgid/20230621130032.3568-4-tzimmermann@suse.de

drm/ast: Remove vga2_clone field

Remove the unused field vga2_clone from struct ast_device. No
functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com> # AST2600
Link: https://patchwork.freedesktop.org/patch/msgid/20230621130032.3568-3-tzimmermann@suse.de

drm/ast: Fix DRAM init on AST2200

Fix the test for the AST2200 in the DRAM initialization. The value
in ast->chip has to be compared against an enum constant instead of
a numerical value.

This bug got introduced when the driver was first imported into the
kernel.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 312fec1405dd ("drm: Initial KMS driver for AST (ASpeed Technologies) 2000 series (v2)")
Cc: Dave Airlie <airlied@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v3.5+
Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com> # AST2600
Link: https://patchwork.freedesktop.org/patch/msgid/20230621130032.3568-2-tzimmermann@suse.de

drm/ttm: Don't shadow the operation context

ttm_bo_swapout() shadows the ttm operation context which may cause
major confusion in driver callbacks when swapping out !TTM_PL_SYSTEM
memory. Fix this by reusing the operation context argument to
ttm_bo_swapout().

Cc: "Christian König" <christian.koenig@amd.com>
Cc: Roger He <Hongbo.He@amd.com>
Cc: <dri-devel@lists.freedesktop.org>
Cc: <intel-gfx@lists.freedesktop.org>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Acked-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Christian König <ckoenig.leichtzumerken@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230626091450.14757-3-thomas.hellstrom@linux.intel.com

fbdev: Make support for userspace interfaces configurable

Add Kconfig option CONFIG_FB_DEVICE and make the virtual fbdev
device optional. If the new option has not been selected, fbdev
does not create files in devfs, sysfs or procfs.

Most modern Linux systems run a DRM-based graphics stack that uses
the kernel's framebuffer console, but has otherwise deprecated fbdev
support. Yet fbdev userspace interfaces are still present.

The option makes it possible to use the fbdev subsystem as console
implementation without support for userspace. This closes potential
entry points to manipulate kernel or I/O memory via framebuffers. It
also prevents the execution of driver code via ioctl or sysfs, both
of which might allow malicious software to exploit bugs in the fbdev
code.

A small number of fbdev drivers require struct fbinfo.dev to be
initialized, usually for the support of sysfs interface. Make these
drivers depend on FB_DEVICE. They can later be fixed if necessary.

v3:
* effect -> affect in Kconfig help (Daniel)
v2:
* set FB_DEVICE default to y (Geert)
* comment on {get,put}_device() (Sam)
* Kconfig fixes (Sam)
* add TODO item about FB_DEVICE dependencies (Sam)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230613110953.24176-39-tzimmermann@suse.de

fbdev/core: Rework fb init code

Init the class "graphics" before the rest of fbdev. Later steps, such
as the sysfs code, depend on the class. Also arrange the module's exit
code in reverse order.

Unexport the global variable fb_class, which is only shared internally
within the fbdev core module.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230613110953.24176-38-tzimmermann@suse.de

fbdev/core: Move file-I/O code into separate file

Move fbdev's file-I/O code into a separate file and contain it in
init and cleanup helpers. No functional changes.

v3:
* add missing file fb_chrdev.c
v2:
* rename source file (Sam)
* include <linux/compat.h> (Javier, kernel test robot)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230613110953.24176-37-tzimmermann@suse.de

fbdev/core: Move procfs code to separate file

Move fbdev's procfs code into a separate file and contain it in
init and cleanup helpers. For the cleanup, replace remove_proc_entry()
with proc_remove(). It is equivalent in functionality, but looks
more like an inverse of proc_create_seq().

v2:
* document proc_remove() usage (Sam)
* revert unrelated removal of for_each_registered_fb()

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230613110953.24176-36-tzimmermann@suse.de

fbdev/core: Add fb_device_{create,destroy}()

Move the logic to create and destroy fbdev devices into the new
helpers fb_device_create() and fb_device_destroy().

There was a call to fb_cleanup_device() in do_unregister_framebuffer()
that was too late. The device had already been removed at this point.
Move the call into fb_device_destroy().

Declare the helpers in the new internal header file fb_internal.h, as
they are only used within the fbdev core module.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230613110953.24176-35-tzimmermann@suse.de

fbdev/core: Move framebuffer and backlight helpers into separate files

Move framebuffer and backlight helpers into separate files. Leave
fbsysfs.c to sysfs-related code. No functional changes.

The framebuffer helpers are not in fbmem.c because they are under
GPL-2.0-or-later copyright, while fbmem.c is GPL-2.0.

v2:
* include <linux/mutex.h> (Sam)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230613110953.24176-34-tzimmermann@suse.de

fbdev/core: Pass Linux device to pm_vt_switch_*() functions

Pass the Linux device to pm_vt_switch_*() instead of the virtual
fbdev device. Prepares fbdev for making struct fb_info.dev optional.

The type of device that is passed to the PM functions does not matter
much. It is only a token within the internal list of known devices.
The PM functions do not refer to any of the device's properties or its
type.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: linux-pm@vger.kernel.org
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230613110953.24176-33-tzimmermann@suse.de

fbdev/tdfxfb: Set i2c adapter parent to hardware device

Use the 3dfx hardware device from the Linux device hierarchy as
parent device of the i2c adapter. Aligns the driver with the rest
of the codebase and prepares fbdev for making struct fb_info.dev
optional.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230613110953.24176-32-tzimmermann@suse.de

fbdev/smscufx: Detect registered fb_info from refcount

Detect registered instances of fb_info by reading the reference
counter from struct fb_info.read. Avoids looking at the dev field
and prepares fbdev for making struct fb_info.dev optional.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Steve Glendinning <steve.glendinning@shawell.net>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230613110953.24176-31-tzimmermann@suse.de

fbdev/sm501fb: Output message with fb_err()

Fix case were dev_err() is being called with struct fb_info.dev.
Use fb_err() instead.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230613110953.24176-30-tzimmermann@suse.de

fbdev/sh7760fb: Use hardware device with dev_() output during probe

Call output helpers in the probe function with the hardware device.
The virtual fbdev device has not been initialized at that point. Also
prepares fbdev for making struct fb_info.dev optional.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230613110953.24176-29-tzimmermann@suse.de

fbdev/sh7760fb: Alloc DMA memory from hardware device

Pass the hardware device to the DMA helpers dma_alloc_coherent() and
dma_free_coherent(). The fbdev device that is currently being used is
a software device and does not provide DMA memory. Also update the
related dev_*() output statements similarly.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230613110953.24176-28-tzimmermann@suse.de

fbdev/sh7760fb: Output messages with fb_dbg()

Fix cases were output helpers are called with struct fb_info.dev.
Use fb_dbg() instead. Prepares fbdev for making struct fb_info.dev
optional.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230613110953.24176-27-tzimmermann@suse.de

fbdev/sh7760fb: Use fb_dbg() in sh7760fb_get_color_info()

Give struct fb_info to sh7760fb_get_color_info() and use it in
call to fb_dbg(). Prepares fbdev for making struct fb_info.dev
optional.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230613110953.24176-26-tzimmermann@suse.de

fbdev/rivafb: Use hardware device as backlight parent

Use the hardware device in struct fb_info.device as parent of the
backlight device. Aligns the driver with the rest of the codebase
and prepares fbdev for making struct fb_info.dev optional.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Antonino Daplas <adaplas@gmail.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230613110953.24176-25-tzimmermann@suse.de

fbdev/rivafb: Reorder backlight and framebuffer init/cleanup

The driver's backlight code requires the framebuffer to be
registered. Therefore reorder the init and cleanup calls for
both data structures.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Antonino Daplas <adaplas@gmail.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230613110953.24176-24-tzimmermann@suse.de

fbdev/radeonfb: Use hardware device as backlight parent

Use the hardware device in struct fb_info.device as parent of the
backlight device. Aligns the driver with the rest of the codebase
and prepares fbdev for making struct fb_info.dev optional.

v2:
* add Cc: tag (Dan)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230613110953.24176-23-tzimmermann@suse.de

fbdev/radeonfb: Reorder backlight and framebuffer cleanup

The driver's backlight code requires the framebuffer to be
registered. Therefore reorder the cleanup calls for both data
structures. The init calls are already in the correct order.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230613110953.24176-22-tzimmermann@suse.de

fbdev/pxa168fb: Do not assign to struct fb_info.dev

Do not assign the hardware device to struct fb_info.dev. The
field references the fbdev software device, which is unrelated.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230613110953.24176-21-tzimmermann@suse.de

fbdev/nvidiafb: Use hardware device as backlight parent

Use the hardware device in struct fb_info.device as parent of the
backlight device. Aligns the driver with the rest of the codebase
and prepares fbdev for making struct fb_info.dev optional.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Antonino Daplas <adaplas@gmail.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230613110953.24176-20-tzimmermann@suse.de

fbdev/nvidiafb: Reorder backlight and framebuffer init/cleanup

The driver's backlight code requires the framebuffer to be
registered. Therefore reorder the init and cleanup calls for
both data structures.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Antonino Daplas <adaplas@gmail.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230613110953.24176-19-tzimmermann@suse.de

fbdev/metronomefb: Use hardware device for dev_err()

Replace the use of the fbdev software device, stored in struct
fb_info.dev, with the hardware device from struct fb_info.device
in load_waveform(). The device is only used for printing errors
with dev_err().

This change aligns load_waveform() with the rest of the driver and
prepares fbdev for making struct fb_info.dev optional.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230613110953.24176-18-tzimmermann@suse.de

fbdev/mb862xxfb: Output messages with fb_dbg()

Fix cases were output helpers are called with struct fb_info.dev.
Use fb_dbg() instead. Prepares fbdev for making struct fb_info.dev
optional.

v2:
* fix another reference to struct fb_info.dev (kernel test reobot)
* remove fb_err() from commit message

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230613110953.24176-17-tzimmermann@suse.de

fbdev/fsl-diu-fb: Output messages with fb_*() helpers

Fix cases were output helpers are called with struct fb_info.dev.
Use fb_*() helpers instead. Prepares fbdev for making struct
fb_info.dev optional.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Timur Tabi <timur@kernel.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230613110953.24176-16-tzimmermann@suse.de

fbdev/ep93xx-fb: Do not assign to struct fb_info.dev

Do not assing the Linux device to struct fb_info.dev. The call to
register_framebuffer() initializes the field to the fbdev device.
Drivers should not override its value.

Fixes a bug where the driver incorrectly decreases the hardware
device's reference counter and leaks the fbdev device.

v2:
* add Fixes tag (Dan)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 88017bda96a5 ("ep93xx video driver")
Cc: <stable@vger.kernel.org> # v2.6.32+
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230613110953.24176-15-tzimmermann@suse.de

fbdev/ep93xx-fb: Output messages with fb_info() and fb_err()

Fix cases were output helpers are called with struct fb_info.dev.
Use fb_info() and fb_err() instead.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230613110953.24176-14-tzimmermann@suse.de

fbdev/ep93xx-fb: Alloc DMA memory from hardware device

Pass the hardware device to the DMA helpers dma_alloc_wc(), dma_mmap_wc()
and dma_free_coherent(). The fbdev device that is currently being used is
a software device and does not provide DMA memory.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230613110953.24176-13-tzimmermann@suse.de

fbdev/broadsheetfb: Call device_remove_file() with hardware device

Call device_remove_file() with the same device that has been used
for device_create_file(), which is the hardware device stored in
struct fb_info.device. Prepares fbdev for making struct fb_info.dev
optional.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230613110953.24176-12-tzimmermann@suse.de

fbdev/aty128fb: Use hardware device as backlight parent

Use the hardware device in struct fb_info.device as parent of the
backlight device. Aligns the driver with the rest of the codebase
and prepares fbdev for making struct fb_info.dev optional.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230613110953.24176-11-tzimmermann@suse.de

fbdev/aty128fb: Reorder backlight and framebuffer init/cleanup

The driver's backlight code requires the framebuffer to be
registered. Therefore reorder the init and cleanup calls for
both data structures.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230613110953.24176-10-tzimmermann@suse.de

fbdev/atyfb: Use hardware device as backlight parent

Use the hardware device in struct fb_info.device as parent of the
backlight device. Aligns the driver with the rest of the codebase
and prepares fbdev for making struct fb_info.dev optional.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230613110953.24176-9-tzimmermann@suse.de

fbdev/atyfb: Reorder backlight and framebuffer init/cleanup

The driver's backlight code requires the framebuffer to be
registered. Therefore reorder the init and cleanup calls for
both data structures.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230613110953.24176-8-tzimmermann@suse.de

backlight/lv5207lp: Rename struct lv5207lp_platform_data.fbdev to 'dev'

Rename struct lv5207lp_platform_data.fbdev to 'dev', as it stores a
pointer to the Linux platform device; not the fbdev device. Makes
the code easier to understand.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Lee Jones <lee@kernel.org>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Jingoo Han <jingoohan1@gmail.com>
Cc: linux-sh@vger.kernel.org
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230613110953.24176-7-tzimmermann@suse.de

backlight/lv5207lp: Compare against struct fb_info.device

Struct lv5207lp_platform_data refers to a platform device within
the Linux device hierarchy. The test in lv5207lp_backlight_check_fb()
compares it against the fbdev device in struct fb_info.dev, which
is different. Fix the test by comparing to struct fb_info.device.

Fixes a bug in the backlight driver and prepares fbdev for making
struct fb_info.dev optional.

v2:
* move renames into separate patch (Javier, Sam, Michael)

Fixes: 82e5c40d88f9 ("backlight: Add Sanyo LV5207LP backlight driver")
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Lee Jones <lee@kernel.org>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Jingoo Han <jingoohan1@gmail.com>
Cc: linux-sh@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v3.12+
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230613110953.24176-6-tzimmermann@suse.de

backlight/gpio_backlight: Rename field 'fbdev' to 'dev'

Rename the field 'fbdev' in struct gpio_backlight_platform_data and
struct gpio_backlight to 'dev', as they store pointers to the Linux
platform device; not the fbdev device. Makes the code easier to
understand.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Rich Felker <dalias@libc.org>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Lee Jones <lee@kernel.org>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Jingoo Han <jingoohan1@gmail.com>
Cc: linux-sh@vger.kernel.org
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230613110953.24176-5-tzimmermann@suse.de

backlight/gpio_backlight: Compare against struct fb_info.device

Struct gpio_backlight_platform_data refers to a platform device within
the Linux device hierarchy. The test in gpio_backlight_check_fb()
compares it against the fbdev device in struct fb_info.dev, which
is different. Fix the test by comparing to struct fb_info.device.

Fixes a bug in the backlight driver and prepares fbdev for making
struct fb_info.dev optional.

v2:
* move renames into separate patch (Javier, Sam, Michael)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 8b770e3c9824 ("backlight: Add GPIO-based backlight driver")
Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Cc: Rich Felker <dalias@libc.org>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Lee Jones <lee@kernel.org>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Jingoo Han <jingoohan1@gmail.com>
Cc: linux-sh@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v3.12+
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230613110953.24176-4-tzimmermann@suse.de

backlight/bd6107: Rename struct bd6107_platform_data.fbdev to 'dev'

Rename struct bd6107_platform_data.fbdev to 'dev', as it stores a
pointer to the Linux platform device; not the fbdev device. Makes
the code easier to understand.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Lee Jones <lee@kernel.org>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Jingoo Han <jingoohan1@gmail.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230613110953.24176-3-tzimmermann@suse.de

backlight/bd6107: Compare against struct fb_info.device

Struct bd6107_platform_data refers to a platform device within
the Linux device hierarchy. The test in bd6107_backlight_check_fb()
compares it against the fbdev device in struct fb_info.dev, which
is different. Fix the test by comparing to struct fb_info.device.

Fixes a bug in the backlight driver and prepares fbdev for making
struct fb_info.dev optional.

v2:
* move renames into separate patch (Javier, Sam, Michael)

Fixes: 67b43e590415 ("backlight: Add ROHM BD6107 backlight driver")
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Cc: Lee Jones <lee@kernel.org>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Jingoo Han <jingoohan1@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v3.12+
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230613110953.24176-2-tzimmermann@suse.de

drm/bridge: dw-hdmi: remove dead code and fix indentation

The hdmi_datamap enum is no longer in use. Also reindent enable_audio's
call params.

Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/ca42985814e9be33b7f8e3a33cea9e18505299e3.1687702042.git.adrian.larumbe@collabora.com

drm/bridge: dw-hdmi: truly enforce 420-only formats when drm mode demands it

The current output bus format selection logic is enforcing YUV420 even
when the drm mode allows for other bus formats as well.
Fix it by adding check for 420-only drm modes.

Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/6e6a217c180584a67ed7992c785764ba54af9151.1687702042.git.adrian.larumbe@collabora.com

drm/bridge: dw-hdmi: change YUV420 selection logic at clock setup

Right now clocking value selection code is prioritising RGB, YUV444 modes
over YUV420 for HDMI2 sinks. However, because of the bus format selection
procedure in dw-hdmi, for HDMI2 sinks YUV420 is the format that will always
be picked during the drm bridge chain check stage.

Later on dw_hdmi_setup will configure a colour space based on the bus
format that doesn't match the pixel value we had calculated as described
above.

Fix it by bringing back dw-hdmi bus format check when picking the right
pixel clock.

Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/6230bfae2cd97cf6527fc62ba5c850464919ccf8.1687702042.git.adrian.larumbe@collabora.com

drm/prime: Unexport helpers for fd/handle conversion

Unexport drm_gem_prime_fd_to_handle() and drm_gem_prime_handle_to_fd().
Both are only used internally within the PRIME code.

v2:
* reword docs as functions are now unexported (Simon)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Simon Ser <contact@emersion.fr>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230620080252.16368-4-tzimmermann@suse.de

drm: Clear fd/handle callbacks in struct drm_driver

Clear all assignments of struct drm_driver's fd/handle callbacks to
drm_gem_prime_fd_to_handle() and drm_gem_prime_handle_to_fd(). These
functions are called by default. Add a TODO item to convert vmwgfx
to the defaults as well.

v2:
* remove TODO item (Zack)
* also update amdgpu's amdgpu_partition_driver

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Simon Ser <contact@emersion.fr>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Jeffrey Hugo <quic_jhugo@quicinc.com> # qaic
Link: https://patchwork.freedesktop.org/patch/msgid/20230620080252.16368-3-tzimmermann@suse.de

drm: Enable PRIME import/export for all drivers

Call drm_gem_prime_handle_to_fd() and drm_gem_prime_fd_to_handle() by
default if no PRIME import/export helpers have been set. Both functions
are the default for almost all drivers.

DRM drivers implement struct drm_driver.gem_prime_import_sg_table
to import dma-buf objects from other drivers. Having the function
drm_gem_prime_fd_to_handle() functions set by default allows each
driver to import dma-buf objects to itself, even without support for
other drivers.

For drm_gem_prime_handle_to_fd() it is similar: using it by default
allows each driver to export to itself, even without support for other
drivers.

This functionality enables userspace to share per-driver buffers
across process boundaries via PRIME (e.g., wlroots requires this
functionality). The patch generalizes a pattern that has previously
been implemented by GEM VRAM helpers [1] to work with any driver.
For example, gma500 can now run the wlroots-based sway compositor.

v2:
* clean up docs and TODO comments (Simon, Zack)
* clean up style in drm_getcap()

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/dri-devel/20230302143502.500661-1-contact@emersion.fr/
Reviewed-by: Simon Ser <contact@emersion.fr>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230620080252.16368-2-tzimmermann@suse.de

drm/mxsfb: Disable overlay plane in mxsfb_plane_overlay_atomic_disable()

When disabling overlay plane in mxsfb_plane_overlay_atomic_update(),
overlay plane's framebuffer pointer is NULL. So, dereferencing it would
cause a kernel Oops(NULL pointer dereferencing). Fix the issue by
disabling overlay plane in mxsfb_plane_overlay_atomic_disable() instead.

Fixes: cb285a5348e7 ("drm: mxsfb: Replace mxsfb_get_fb_paddr() with drm_fb_cma_get_gem_addr()")
Cc: stable@vger.kernel.org # 5.19+
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230612092359.784115-1-victor.liu@nxp.com

drm/vkms: Isolate writeback pixel conversion functions

All convertions from the ARGB16161616 format follow the same structure.
Instead of repeting the same structure for each supported format, create
a function to encapsulate the common logic and isolate the pixel
conversion functions in a callback function.

Suggested-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Arthur Grillo <arthurgrillo@riseup.net>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20230515135204.115393-4-mcanal@igalia.com

drm/vkms: Enable ARGB8888 support for writeback

The VKMS already has a function to convert ARGB16161616 to ARGB8888, so
it is possible to use this function to provide the writeback support for
the ARGB8888 format. Therefore, add the ARGB8888 format to the writeback
format list.

Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Arthur Grillo <arthurgrillo@riseup.net>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20230515135204.115393-3-mcanal@igalia.com

drm/vkms: Reduce critical section

The spinlock composer_lock protects the variables crc_pending,
wb_pending, frame_start and frame_end, which are variables that are used
by the composer worker. There is no need to protect the wb_frame_info
information with a spinlock. Therefore, reduce the critical section of
the lock by removing the assignments to the wb_frame_info from the
critical section.

Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Arthur Grillo <arthurgrillo@riseup.net>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20230515135204.115393-2-mcanal@igalia.com

drm/bridge: ps8640: Drop the ability of ps8640 to fetch the EDID

In order to read the EDID from an eDP panel, you not only need to
power on the bridge chip itself but also the panel. In the ps8640
driver, this was made to work by having the bridge chip manually power
the panel on by calling pre_enable() on everything connectorward on
the bridge chain. This worked OK, but...

...when trying to do the same thing on ti-sn65dsi86, feedback was that
this wasn't a great idea. As a result, we designed the "DP AUX"
bus. With the design we ended up with the panel driver itself was in
charge of reading the EDID. The panel driver could power itself on and
the bridge chip was able to power itself on because it implemented the
DP AUX bus.

Despite the fact that we came up with a new scheme, implemented in on
ti-sn65dsi86, and even implemented it on parade-ps8640, we still kept
the old code around. This was because the new scheme required a DT
change. Previously the panel was a simple "platform_device" and in DT
at the top level. With the new design the panel needs to be listed in
DT under the DP controller node. The old code allowed us to properly
fetch EDIDs with ps8640 with the old DTs.

Unfortunately, the old code stopped working as of commit 102e80d1fa2c
("drm/bridge: ps8640: Use atomic variants of drm_bridge_funcs"). There
are cases at bootup where connector->state->state is NULL and the
kernel crashed at:
* drm_atomic_bridge_chain_pre_enable
* drm_atomic_get_old_bridge_state
* drm_atomic_get_old_private_obj_state

The crash went away at commit 4fb912e5e190 ("drm/bridge: Introduce
pre_enable_prev_first to alter bridge init order") which added a NULL
check. However, even though we were no longer crashing the end result
was that we weren't actually powering the panel on when we thought we
were. Things could end up working (despite warning splats) if
userspace was persistent and tried to get the mode again, but it
wasn't great.

A bit of digging was done to see if there was an easy fix but there
was nothing obvious. Instead, the only device using ps8640 the "old"
way had its DT updated so that the panel was no longer a simple
"platform_deice". See commit c2d94f72140a ("arm64: dts: mediatek:
mt8173-elm: Move display to ps8640 auxiliary bus") and commit
113b5cc06f44 ("arm64: dts: mediatek: mt8173-elm: remove panel model
number in DT").

Let's delete the old broken code so nobody gets tempted to copy it or
figure out how it works (since it doesn't).

NOTE: from a device tree "purist" point of view, we're supposed to
keep old device trees working and this patch is technically "against
policy". Reasons I'm still proposing it anyway:
1. Officially, old mt8173-elm device trees worked via the "little
   white lie" approach. The DT would list an arbitrary/representative
   panel that would be used for power sequencing. The mode information
   in the panel driver would then be ignored / overridden by the EDID
   reading code in ps8640. I don't feel too terrible breaking DTs that
   contained the wrong "compatible" string to begin with. NOTE that
   any old device trees that _didn't_ lie about their compatible will
   still work because the mode information will come from the
   hardcoded panels in panel-edp.
2. The only users of the old code were Chromebooks and Chromebooks
   don't bake their DTs into the BIOS (they are bundled with the
   kernel). Thus we don't need to worry about breaking someone using
   an old DT with a new kernel.
3. The old code was broken anyway. If someone wants to fix the old
   code instead of deleting it then they have my blessing, but without
   a proper fix the old code isn't useful.

Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230616165517.v2.1.I7b8f60b3fbfda068f9bf452d584dc934494bfbfa@changeid

drm/kms: log when querying an object not included in lease

User-space may query an existing object not included in a lease.
Make it easier to debug such situations by logging a debug message.

Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20230623143514.38707-1-contact@emersion.fr

drm/atomic: log errors in drm_mode_atomic_ioctl()

Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221019143736.267324-7-contact@emersion.fr

drm/atomic: log when page-flip is requested without CRTCs

Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221019143736.267324-6-contact@emersion.fr

drm/atomic: log on attempt to set legacy DPMS property

Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221019143736.267324-5-contact@emersion.fr

drm/atomic: log when CRTC_ID prop value is invalid

Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221019143736.267324-4-contact@emersion.fr

drm/atomic: log when getting/setting unknown properties

Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221019143736.267324-3-contact@emersion.fr

drm/atomic: drop extra bracket from log messages

Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221019143736.267324-2-contact@emersion.fr

drm/atomic: log drm_atomic_replace_property_blob_from_id() errors

Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221019143736.267324-1-contact@emersion.fr

drm/bridge_connector: use drm_kms_helper_connector_hotplug_event()

This adds more information to the hotplug uevent and lets user-space
know that it's about a particular connector only.

Signed-off-by: Simon Ser <contact@emersion.fr>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Paul Cercueil <paul@crapouillou.net>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230620175506.263109-1-contact@emersion.fr

drm/sysfs: rename drm_sysfs_connector_status_event()

Rename drm_sysfs_connector_status_event() to
drm_sysfs_connector_property_event(). Indeed, "status" is a bit
vague: it can easily be confused with the connected/disconnected
status of the connector. This function has nothing to do with
connected/disconnected: it merely sends a notification that a
connector's property has changed (e.g. HDCP, privacy screen, etc).

Signed-off-by: Simon Ser <contact@emersion.fr>
Cc: Manasi Navare <navaremanasi@chromium.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230620174231.260335-1-contact@emersion.fr

drm: fix code style for embedded structs in hdr_metadata_infoframe

Only the stuff inside the brackets should be indented.

Signed-off-by: Simon Ser <contact@emersion.fr>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sebastian Wick <sebastian.wick@redhat.com>
Cc: Joshua Ashton <joshua@froggi.es>
Cc: Pekka Paalanen <pekka.paalanen@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230428100115.9802-1-contact@emersion.fr

drm/mgag200: set variable mgag200_modeset storage-class-specifier to static

smatch reports
drivers/gpu/drm/mgag200/mgag200_drv.c:23:5: warning: symbol
'mgag200_modeset' was not declared. Should it be static?

This variable is only used in its defining file, so it should be static

Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230517134140.874179-1-trix@redhat.com

drm: bridge: dw-mipi-dsi: Fix enable/disable of DSI controller

Before this patch, booting to Linux VT and doing a simple:

  echo 2 > /sys/class/graphics/fb0/blank
  echo 0 > /sys/class/graphics/fb0/blank

would result in failures to re-enable the panel. Mode set callback is
called only once during boot in this scenario, while calls to
enable/disable callbacks are balanced afterwards. The driver doesn't
work unless userspace calls modeset before enabling the CRTC/connector.

This patch moves enabling of the DSI host from mode_set into pre_enable
callback, and removes some old hacks where this bridge driver is
directly calling into other bridge driver's callbacks.

pre_enable_prev_first flag is set on the panel's bridge so that panel
drivers will get their prepare function called between DSI host's
pre_enable and enable callbacks, so that they get a chance to
perform panel setup while DSI host is already enabled in command
mode. Otherwise panel's prepare would be called before DSI host
is enabled, and any DSI communication used in prepare callback
would fail.

With all these changes, the enable/disable sequence is now well
balanced, and host's and panel's callbacks are called in proper order
documented in the drm_panel API documentation without needing the old
hacks. (Mainly that panel->prepare is called when DSI host is ready to
allow the panel driver to send DSI commands and vice versa during
disable.)

Tested on Pinephone Pro. Trace of the callbacks follows.

Before:

[    1.253882] dw-mipi-dsi-rockchip ff960000.dsi: mode_set
[    1.290732] panel-himax-hx8394 ff960000.dsi.0: prepare
[    1.475576] dw-mipi-dsi-rockchip ff960000.dsi: enable
[    1.475593] panel-himax-hx8394 ff960000.dsi.0: enable

echo 2 > /sys/class/graphics/fb0/blank

[   13.722799] panel-himax-hx8394 ff960000.dsi.0: disable
[   13.774502] dw-mipi-dsi-rockchip ff960000.dsi: post_disable
[   13.774526] panel-himax-hx8394 ff960000.dsi.0: unprepare

echo 0 > /sys/class/graphics/fb0/blank

[   17.735796] panel-himax-hx8394 ff960000.dsi.0: prepare
[   17.923522] dw-mipi-dsi-rockchip ff960000.dsi: enable
[   17.923540] panel-himax-hx8394 ff960000.dsi.0: enable
[   17.944330] dw-mipi-dsi-rockchip ff960000.dsi: failed to write command FIFO
[   17.944335] panel-himax-hx8394 ff960000.dsi.0: sending command 0xb9 failed: -110
[   17.944340] panel-himax-hx8394 ff960000.dsi.0: Panel init sequence failed: -110

echo 2 > /sys/class/graphics/fb0/blank

[  431.148583] panel-himax-hx8394 ff960000.dsi.0: disable
[  431.169259] dw-mipi-dsi-rockchip ff960000.dsi: failed to write command FIFO
[  431.169268] panel-himax-hx8394 ff960000.dsi.0: Failed to enter sleep mode: -110
[  431.169282] dw-mipi-dsi-rockchip ff960000.dsi: post_disable
[  431.169316] panel-himax-hx8394 ff960000.dsi.0: unprepare
[  431.169357] pclk_mipi_dsi0 already disabled

echo 0 > /sys/class/graphics/fb0/blank

[  432.796851] panel-himax-hx8394 ff960000.dsi.0: prepare
[  432.981537] dw-mipi-dsi-rockchip ff960000.dsi: enable
[  432.981568] panel-himax-hx8394 ff960000.dsi.0: enable
[  433.002290] dw-mipi-dsi-rockchip ff960000.dsi: failed to write command FIFO
[  433.002299] panel-himax-hx8394 ff960000.dsi.0: sending command 0xb9 failed: -110
[  433.002312] panel-himax-hx8394 ff960000.dsi.0: Panel init sequence failed: -110

-----------------------------------------------------------------------

After:

[    1.248372] dw-mipi-dsi-rockchip ff960000.dsi: mode_set
[    1.248704] dw-mipi-dsi-rockchip ff960000.dsi: pre_enable
[    1.285377] panel-himax-hx8394 ff960000.dsi.0: prepare
[    1.468392] dw-mipi-dsi-rockchip ff960000.dsi: enable
[    1.468421] panel-himax-hx8394 ff960000.dsi.0: enable

echo 2 > /sys/class/graphics/fb0/blank

[   16.210357] panel-himax-hx8394 ff960000.dsi.0: disable
[   16.261315] dw-mipi-dsi-rockchip ff960000.dsi: post_disable
[   16.261339] panel-himax-hx8394 ff960000.dsi.0: unprepare

echo 0 > /sys/class/graphics/fb0/blank

[   19.161453] dw-mipi-dsi-rockchip ff960000.dsi: pre_enable
[   19.197869] panel-himax-hx8394 ff960000.dsi.0: prepare
[   19.382141] dw-mipi-dsi-rockchip ff960000.dsi: enable
[   19.382158] panel-himax-hx8394 ff960000.dsi.0: enable

       (But depends on functionality intorduced in Linux 6.3, so this patch will
        not build on older kernels when applied to older stable branches.)

Fixes: 46fc51546d44 ("drm/bridge/synopsys: Add MIPI DSI host controller bridge")
Signed-off-by: Ondrej Jirman <megi@xff.cz>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230617224915.1923630-1-megi@xff.cz

drm/i2c: Switch i2c drivers back to use .probe()

After commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new()
call-back type"), all drivers being converted to .probe_new() and then
commit 03c835f498b5 ("i2c: Switch .probe() to not take an id parameter")
convert back to (the new) .probe() to be able to eventually drop
.probe_new() from struct i2c_driver.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230611202740.826120-1-u.kleine-koenig@pengutronix.de

drm/bridge: tc358762: Handle HS/VS polarity

Add support for handling the HS/VS sync signals polarity in the bridge
driver, otherwise e.g. DSIM bridge feeds the TC358762 inverted polarity
sync signals and the image is shifted to the left, up, and wobbly.

Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230615201902.566182-5-marex@denx.de

drm/bridge: tc358762: Guess the meaning of LCDCTRL bits

The register content and behavior is very similar to TC358764 VP_CTRL.
All the bits except for unknown bit 6 also seem to match, even though
the datasheet is just not available. Add a comment and reuse the bit
definitions.

Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230615201902.566182-4-marex@denx.de

drm/bridge: tc358762: Instruct DSI host to generate HSE packets

This bridge seems to need the HSE packet, otherwise the image is
shifted up and corrupted at the bottom. This makes the bridge
work with Samsung DSIM on i.MX8MM and i.MX8MP.

Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230615201902.566182-3-marex@denx.de

drm/bridge: tc358762: Switch to atomic ops

Switch the bridge driver over to atomic ops. No functional change.

Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230615201902.566182-2-marex@denx.de

drm/bridge: tc358762: Split register programming from pre-enable to enable

Move the register programming part, which actually enables the bridge and
makes it push data out of its DPI side, into the enable callback. The DSI
host like DSIM may not be able to transmit commands in pre_enable, moving
the register programming into enable assures it can transmit commands.

Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230615201902.566182-1-marex@denx.de

drm/bridge: tc358764: Use BIT() macro for actual bits

None of these four bits are bitfields, use BIT() macro and treat
them as bits. No functional change.

Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230615201635.565973-1-marex@denx.de

drm/shmem-helper: Switch to reservation lock

Replace all drm-shmem locks with a GEM reservation lock. This makes locks
consistent with dma-buf locking convention where importers are responsible
for holding reservation lock for all operations performed over dma-bufs,
preventing deadlock between dma-buf importers and exporters.

Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230529223935.2672495-7-dmitry.osipenko@collabora.com

dma-buf: Change locking policy for mmap()

Change locking policy of mmap() callback, making exporters responsible
for handling dma-buf reservation locking. Previous locking policy stated
that dma-buf is locked for both importers and exporters by the dma-buf
core, which caused a deadlock problem for DRM drivers in a case of
self-imported dma-bufs which required to take the lock from the DRM
exporter side.

Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230529223935.2672495-6-dmitry.osipenko@collabora.com

drm: Don't assert held reservation lock for dma-buf mmapping

Don't assert held dma-buf reservation lock on memory mapping of exported
buffer.

We're going to change dma-buf mmap() locking policy such that exporters
will have to handle the lock. The previous locking policy caused deadlock
problem for DRM drivers in a case of self-imported dma-bufs once these
drivers are moved to use reservation lock universally. The problem is
solved by moving the lock down to exporters. This patch prepares DRM
drivers for the locking policy update.

Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230529223935.2672495-2-dmitry.osipenko@collabora.com
Link: https://patchwork.freedesktop.org/patch/msgid/20230529223935.2672495-3-dmitry.osipenko@collabora.com
Link: https://patchwork.freedesktop.org/patch/msgid/20230529223935.2672495-4-dmitry.osipenko@collabora.com
Link: https://patchwork.freedesktop.org/patch/msgid/20230529223935.2672495-2-dmitry.osipenko@collabora.com
Link: https://patchwork.freedesktop.org/patch/msgid/20230529223935.2672495-3-dmitry.osipenko@collabora.com
Link: https://patchwork.freedesktop.org/patch/msgid/20230529223935.2672495-4-dmitry.osipenko@collabora.com

udmabuf: Don't assert held reservation lock for dma-buf mmapping

Don't assert held dma-buf reservation lock on memory mapping of exported
buffer.

We're going to change dma-buf mmap() locking policy such that exporters
will have to handle the lock. The previous locking policy caused deadlock
problem for DRM drivers in a case of self-imported dma-bufs once these
drivers are moved to use reservation lock universally. The problem is
solved by moving the lock down to exporters. This patch prepares udmabuf
for the locking policy update.

Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230529223935.2672495-4-dmitry.osipenko@collabora.com

dma-buf/heaps: Don't assert held reservation lock for dma-buf mmapping

Don't assert held dma-buf reservation lock on memory mapping of exported
buffer.

We're going to change dma-buf mmap() locking policy such that exporters
will have to handle the lock. The previous locking policy caused deadlock
problem for DRM drivers in a case of self-imported dma-bufs once these
drivers are moved to use reservation lock universally. The problem
solved by moving the lock down to exporters. This patch prepares dma-buf
heaps for the locking policy update.

Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230529223935.2672495-3-dmitry.osipenko@collabora.com

media: videobuf2: Don't assert held reservation lock for dma-buf mmapping

Don't assert held dma-buf reservation lock on memory mapping of exported
buffer.

We're going to change dma-buf mmap() locking policy such that exporters
will have to handle the lock. The previous locking policy caused deadlock
problem for DRM drivers in a case of self-imported dma-bufs once these
drivers are moved to use reservation lock universally. The problem is
solved by moving the lock down to exporters. This patch prepares videobuf2
for the locking policy update.

Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230529223935.2672495-2-dmitry.osipenko@collabora.com

MAINTAINERS: Add myself as reviewer for mgag200 and ast drivers

I've contributed to these two drivers, fixing bugs and performance
issues.

Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230530142615.57014-1-jfalempe@redhat.com

drm/bridge: lt9611uxc: Add MODULE_FIRMWARE macro

The module loads firmware so add a MODULE_FIRMWARE macro to provide that
information via modinfo.

Signed-off-by: Juerg Haefliger <juerg.haefliger@canonical.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230620061254.1210248-1-juerg.haefliger@canonical.com

drm/vkms: Fix all kernel-doc warnings of the vkms_composer file

Fix the following warnings:

drivers/gpu/drm/vkms/vkms_composer.c:42: warning: Function parameter or member 'frame_info' not described in 'pre_mul_alpha_blend'
drivers/gpu/drm/vkms/vkms_composer.c:42: warning: Excess function parameter 'src_frame_info' description in 'pre_mul_alpha_blend'
drivers/gpu/drm/vkms/vkms_composer.c:93: warning: Cannot understand * @wb_frame_info: The writeback frame buffer metadata
on line 93 - I thought it was a doc line

by correcting variable names and adding function name.

Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20230508220030.434118-2-mcanal@igalia.com

drm/vkms: Add kernel-doc to the function vkms_compose_row()

The function vkms_compose_row() was introduced in the code without any
documentation. In order to make the function more clear, add a
kernel-doc to it.

Suggested-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20230508220030.434118-1-mcanal@igalia.com

drm/amdgpu: Remove struct drm_driver.gem_prime_mmap

The callback struct drm_driver.gem_prime_mmap as been removed in
commit 0adec22702d4 ("drm: Remove struct drm_driver.gem_prime_mmap").
Do not assign to it. The assigned function, drm_gem_prime_mmap(), is
now the default for the operation, so there is no change in functionality.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 0adec22702d4 ("drm: Remove struct drm_driver.gem_prime_mmap")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230619141129.2002-1-tzimmermann@suse.de

Merge drm/drm-next into drm-misc-next

Backmerging into drm-misc-next to get commit 2c1c7ba457d4
("drm/amdgpu: support partition drm devices"), which is required to fix
commit 0adec22702d4 ("drm: Remove struct drm_driver.gem_prime_mmap").

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

drm: Remove struct drm_driver.gem_prime_mmap

All drivers initialize this field with drm_gem_prime_mmap(). Call
the function directly and remove the field. Simplifies the code and
resolves a long-standing TODO item.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230613150441.17720-3-tzimmermann@suse.de

drm/msm: Initialize mmap offset after constructing the buffer object

Only the msm driver provides its own implementation of gem_prime_mmap
from struct drm_driver. All other drivers use the drm_gem_prime_mmap()
helper.

Initialize the mmap offset when constructing the buffer object in msm
and reduce the gem_prime_mmap code to the generic helper. Prepares
msm for the removal of struct drm_driver.gem_prime_mmap.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230613150441.17720-2-tzimmermann@suse.de

MAINTAINERS: Update info for TI display drivers

Add drm-misc as the git tree for tilcdc and omapdrm. Change Tomi's email
to point to ideasonboard.com instead of kernel.org.

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230619082323.20575-1-tomi.valkeinen@ideasonboard.com

drm/tidss: Add support for AM625 DSS

Add support for the DSS controller on TI's AM625 SoC in the tidss
driver.

The AM625 DSS supports 2 video planes connecting to 2 video ports.
The first plane is a full plane supporting all the features, while the
2nd plane is a "lite" plane without scaling support.

The first video port in AM625 DSS internally provides DPI output to 2
OLDI transmitters. Each OLDI TX outputs 4 differential lanes of video
output and 1 of clock output.

This patch does not automatically enable the OLDI features of AM625 yet.
That support for OLDI will be added subsequently.

The second video port outputs DPI data directly out of the SoC. It has
24 data lines and can support a maximum of RGB888 output bus format.

Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230616150900.6617-3-a-bhatia1@ti.com

dt-bindings: display: ti,am65x-dss: Add am625 dss compatible

The DSS controller on TI's AM625 SoC is an update from that on TI's
AM65X SoC. The former has an additional OLDI TX on its first video port
that helps output cloned video or WUXGA (1920x1200@60fps) resolution
video output over a dual-link mode to reduce the required OLDI clock
output.

The second video port is same from AM65x DSS and it outputs DPI video
data. It can support 2K resolutions @ 60fps, independently.

Add the new controller's compatible and update descriptions.

Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230616150900.6617-2-a-bhatia1@ti.com

Merge tag 'drm-msm-next-2023-06-18' of https://gitlab.freedesktop.org/drm/msm into drm-next

Updates for v6.5.. this includes a backmerg of drm-next tree to be able
to use new DRM DSC helpers.

Core:
+ Add Marijn Suijten as drm/msm reviewer
+ Adreno A660 bindings
+ SM8350 MDSS bindings fix
+ Fix adreno_is_a690() warnings
+ More generic (DRM) and MSM-specific DSC helpers

DP:
+ Removed obsolete USB-PD remains
+ Documented DP compatible string for sm8550 platform

DPU:
+ Enable missing features (DSPP, DSC, split display) on sc8180x,
  sc8280xp, sm8450
+ Enabled writeback on sc7280
+ Implemented tearcheck support to support vsync on SM150 and
  newer platforms
+ Native HDMI output support
+ Dropped unused features: regdma, GC, IGC
+ Fixed the DSC flush operations
+ Simplified QoS handling, removing obsolete and unused features
  and merging SSPP and WB code paths
+ Reworked dpu_encoder initialisation path
+ Enabled DSPP support on sdm845
+ Disabled color-management if DSPP blocks are not available
+ Added support for DSC 1.2 blocks found on sm8350 and later
+ Added .fb_dirty to fix CMD panels

DSI:
+ Drop powerup quirks in favour of using pre_enable_prev_first for
  downstream bridges
+ Fixed 14nm DSI PHY programming
+ Added support for DSI and 28nm DSI PHY on MSM8226 platform
+ Make use of DRM and MSM DSC helpers

MDP5:
+ Added support for display controller on MSM8226 platform

GPU:
+ A690 support
+ Don't set IO_PGTABLE_QUIRK_ARM_OUTER_WBWA on devices with coherent SMMU
  (like A690)
+ Move cmdstream dumping out of fence signaling path
+ Cleanups
+ Support for a6xx devices without GMU (aka "GMU wrapper"
+ a610 support
+ a619_holi support (a619 variant without GMU)

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGsUB=tRB4nR6ZCJMuLhro5zN3BQWUSywVYbaipqqDZ_cQ@mail.gmail.com