net/mlx5e: Fix CPU mapping after function reload to avoid aRFS RX crash

[ Upstream commit f4aebbfb56ed0c186adbeb2799df836da50f78e3 ]

After function reload, CPU mapping used by aRFS RX is broken, leading to
a kernel panic. Fix by moving initialization of rx_cpu_rmap from
netdev_init to netdev_attach. IRQ table is re-allocated on mlx5_load,
but netdev is not re-initialize.

Trace of the panic:
[ 22.055672] general protection fault, probably for non-canonical address 0x785634120000ff1c: 0000 [#1] SMP PTI
[ 22.065010] CPU: 4 PID: 0 Comm: swapper/4 Not tainted 5.7.0-rc2-for-upstream-perf-2020-04-21_16-34-03-31 #1
[ 22.067967] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
[ 22.071174] RIP: 0010:get_rps_cpu+0x267/0x300
[ 22.075692] RSP: 0018:ffffc90000244d60 EFLAGS: 00010202
[ 22.076888] RAX: ffff888459b0e400 RBX: 0000000000000000 RCX:0000000000000007
[ 22.078364] RDX: 0000000000008884 RSI: ffff888467cb5b00 RDI:0000000000000000
[ 22.079815] RBP: 00000000ff342b27 R08: 0000000000000007 R09:0000000000000003
[ 22.081289] R10: ffffffffffffffff R11: 00000000000070cc R12:ffff888454900000
[ 22.082767] R13: ffffc90000e5a950 R14: ffffc90000244dc0 R15:0000000000000007
[ 22.084190] FS: 0000000000000000(0000) GS:ffff88846fc80000(0000)knlGS:0000000000000000
[ 22.086161] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 22.087427] CR2: ffffffffffffffff CR3: 0000000464426003 CR4:0000000000760ee0
[ 22.088888] DR0: 0000000000000000 DR1: 0000000000000000 DR2:0000000000000000
[ 22.090336] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7:0000000000000400
[ 22.091764] PKRU: 55555554
[ 22.092618] Call Trace:
[ 22.093442] <IRQ>
[ 22.094211] ? kvm_clock_get_cycles+0xd/0x10
[ 22.095272] netif_receive_skb_list_internal+0x258/0x2a0
[ 22.096460] gro_normal_list.part.137+0x19/0x40
[ 22.097547] napi_complete_done+0xc6/0x110
[ 22.098685] mlx5e_napi_poll+0x190/0x670 [mlx5_core]
[ 22.099859] net_rx_action+0x2a0/0x400
[ 22.100848] __do_softirq+0xd8/0x2a8
[ 22.101829] irq_exit+0xa5/0xb0
[ 22.102750] do_IRQ+0x52/0xd0
[ 22.103654] common_interrupt+0xf/0xf
[ 22.104641] </IRQ>

Fixes: 4383cfcc65e7 ("net/mlx5: Add devlink reload")
Signed-off-by: Aya Levin <ayal@mellanox.com>
Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5e: Fix VXLAN configuration restore after function reload

[ Upstream commit b3c2ed21c0bdf35ba498a9974aa587f99a03b658 ]

When detaching netdev, remove vxlan port configuration using
udp_tunnel_drop_rx_info. During function reload, configuration will be
restored using udp_tunnel_get_rx_info. This ensures sync between
firmware and driver. Use udp_tunnel_get_rx_info even if its physical
interface is down.

Fixes: 4383cfcc65e7 ("net/mlx5: Add devlink reload")
Signed-off-by: Aya Levin <ayal@mellanox.com>
Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5: Fix eeprom support for SFP module

[ Upstream commit 47afbdd2fa4c5775c383ba376a3d1da7d7f694dc ]

Fix eeprom SFP query support by setting i2c_addr, offset and page number
correctly. Unlike QSFP modules, SFP eeprom params are as follow:
- i2c_addr is 0x50 for offset 0 - 255 and 0x51 for offset 256 - 511.
- Page number is always zero.
- Page offset is always relative to zero.

As part of eeprom query, query the module ID (SFP / QSFP*) via helper
function to set the params accordingly.

In addition, change mlx5_qsfp_eeprom_page() input type to be u16 to avoid
unnecessary casting.

Fixes: a708fb7b1f8d ("net/mlx5e: ethtool, Add support for EEPROM high pages query")
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Huy Nguyen <huyn@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests: bpf: Fix detach from sockmap tests

[ Upstream commit f43cb0d672aa8eb09bfdb779de5900c040487d1d ]

Fix sockmap tests which rely on old bpf_prog_dispatch behaviour.
In the first case, the tests check that detaching without giving
a program succeeds. Since these are not the desired semantics,
invert the condition. In the second case, the clean up code doesn't
supply the necessary program fds.

Fixes: bb0de3131f4c ("bpf: sockmap: Require attach_bpf_fd when detaching a program")
Reported-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20200709115151.75829-1-lmb@cloudflare.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

qed: Populate nvm-file attributes while reading nvm config partition.

[ Upstream commit 13cf8aab7425a253070433b5a55b4209ceac8b19 ]

NVM config file address will be modified when the MBI image is upgraded.
Driver would return stale config values if user reads the nvm-config
(via ethtool -d) in this state. The fix is to re-populate nvm attribute
info while reading the nvm config values/partition.

Changes from previous version:
-------------------------------
v3: Corrected the formatting in 'Fixes' tag.
v2: Added 'Fixes' tag.

Fixes: 1ac4329a1cff ("qed: Add configuration information to register dump and debug data")
Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

IB/mlx5: Fix 50G per lane indication

[ Upstream commit 530c8632b547ff72f11ff83654b22462a73f1f7b ]

Some released FW versions mistakenly don't set the capability that 50G per
lane link-modes are supported for VFs (ptys_extended_ethernet capability
bit).

Use PTYS.ext_eth_proto_capability instead, as this indication is always
accurate. If PTYS.ext_eth_proto_capability is valid
(has a non-zero value) conclude that the HCA supports 50G per lane.

Otherwise, conclude that the HCA doesn't support 50G per lane.

Fixes: 08e8676f1607 ("IB/mlx5: Add support for 50Gbps per lane link modes")
Link: https://lore.kernel.org/r/20200707110612.882962-3-leon@kernel.org
Signed-off-by: Aya Levin <ayal@mellanox.com>
Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com>
Reviewed-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cxgb4: fix all-mask IP address comparison

[ Upstream commit 76c4d85c9260c3d741cbd194c30c61983d0a4303 ]

Convert all-mask IP address to Big Endian, instead, for comparison.

Fixes: f286dd8eaad5 ("cxgb4: use correct type for all-mask IP address comparison")
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nbd: Fix memory leak in nbd_add_socket

[ Upstream commit 579dd91ab3a5446b148e7f179b6596b270dace46 ]

When adding first socket to nbd, if nsock's allocation failed, the data
structure member "config->socks" was reallocated, but the data structure
member "config->num_connections" was not updated. A memory leak will occur
then because the function "nbd_config_put" will free "config->socks" only
when "config->num_connections" is not zero.

Fixes: 03bf73c315ed ("nbd: prevent memory leak")
Reported-by: syzbot+934037347002901b8d2a@syzkaller.appspotmail.com
Signed-off-by: Zheng Bin <zhengbin13@huawei.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: kgdb: Fix single-step exception handling oops

[ Upstream commit 8523c006264df65aac7d77284cc69aac46a6f842 ]

After entering kdb due to breakpoint, when we execute 'ss' or 'go' (will
delay installing breakpoints, do single-step first), it won't work
correctly, and it will enter kdb due to oops.

It's because the reason gotten in kdb_stub() is not as expected, and it
seems that the ex_vector for single-step should be 0, like what arch
powerpc/sh/parisc has implemented.

Before the patch:
Entering kdb (current=0xffff8000119e2dc0, pid 0) on processor 0 due to Keyboard Entry
[0]kdb> bp printk
Instruction(i) BP #0 at 0xffff8000101486cc (printk)
    is enabled   addr at ffff8000101486cc, hardtype=0 installed=0

[0]kdb> g

/ # echo h > /proc/sysrq-trigger

Entering kdb (current=0xffff0000fa878040, pid 266) on processor 3 due to Breakpoint @ 0xffff8000101486cc
[3]kdb> ss

Entering kdb (current=0xffff0000fa878040, pid 266) on processor 3 Oops: (null)
due to oops @ 0xffff800010082ab8
CPU: 3 PID: 266 Comm: sh Not tainted 5.7.0-rc4-13839-gf0e5ad491718 #6
Hardware name: linux,dummy-virt (DT)
pstate: 00000085 (nzcv daIf -PAN -UAO)
pc : el1_irq+0x78/0x180
lr : __handle_sysrq+0x80/0x190
sp : ffff800015003bf0
x29: ffff800015003d20 x28: ffff0000fa878040
x27: 0000000000000000 x26: ffff80001126b1f0
x25: ffff800011b6a0d8 x24: 0000000000000000
x23: 0000000080200005 x22: ffff8000101486cc
x21: ffff800015003d30 x20: 0000ffffffffffff
x19: ffff8000119f2000 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000
x15: 0000000000000000 x14: 0000000000000000
x13: 0000000000000000 x12: 0000000000000000
x11: 0000000000000000 x10: 0000000000000000
x9 : 0000000000000000 x8 : ffff800015003e50
x7 : 0000000000000002 x6 : 00000000380b9990
x5 : ffff8000106e99e8 x4 : ffff0000fadd83c0
x3 : 0000ffffffffffff x2 : ffff800011b6a0d8
x1 : ffff800011b6a000 x0 : ffff80001130c9d8
Call trace:
 el1_irq+0x78/0x180
 printk+0x0/0x84
 write_sysrq_trigger+0xb0/0x118
 proc_reg_write+0xb4/0xe0
 __vfs_write+0x18/0x40
 vfs_write+0xb0/0x1b8
 ksys_write+0x64/0xf0
 __arm64_sys_write+0x14/0x20
 el0_svc_common.constprop.2+0xb0/0x168
 do_el0_svc+0x20/0x98
 el0_sync_handler+0xec/0x1a8
 el0_sync+0x140/0x180

[3]kdb>

After the patch:
Entering kdb (current=0xffff8000119e2dc0, pid 0) on processor 0 due to Keyboard Entry
[0]kdb> bp printk
Instruction(i) BP #0 at 0xffff8000101486cc (printk)
    is enabled   addr at ffff8000101486cc, hardtype=0 installed=0

[0]kdb> g

/ # echo h > /proc/sysrq-trigger

Entering kdb (current=0xffff0000fa852bc0, pid 268) on processor 0 due to Breakpoint @ 0xffff8000101486cc
[0]kdb> g

Entering kdb (current=0xffff0000fa852bc0, pid 268) on processor 0 due to Breakpoint @ 0xffff8000101486cc
[0]kdb> ss

Entering kdb (current=0xffff0000fa852bc0, pid 268) on processor 0 due to SS trap @ 0xffff800010082ab8
[0]kdb>

Fixes: 44679a4f142b ("arm64: KGDB: Add step debugging support")
Signed-off-by: Wei Li <liwei391@huawei.com>
Tested-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20200509214159.19680-2-liwei391@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: atlantic: fix ip dst and ipv6 address filters

[ Upstream commit a42e6aee7f47a8a68d09923c720fc8f605a04207 ]

This patch fixes ip dst and ipv6 address filters.
There were 2 mistakes in the code, which led to the issue:
* invalid register was used for ipv4 dst address;
* incorrect write order of dwords for ipv6 addresses.

Fixes: 23e7a718a49b ("net: aquantia: add rx-flow filter definitions")
Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com>
Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com>
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/siw: Fix reporting vendor_part_id

[ Upstream commit 04340645f69ab7abb6f9052688a60f0213b3f79c ]

Move the initialization of the vendor_part_id to be before calling
ib_register_device(), this is needed because the query_device() callback
is called from the context of ib_register_device() before initializing the
vendor_part_id, so the reported value is wrong.

Fixes: bdcf26bf9b3a ("rdma/siw: network and RDMA core interface")
Link: https://lore.kernel.org/r/20200707130931.444724-1-kamalheib1@gmail.com
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Reviewed-by: Bernard Metzler <bmt@zurich.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/64s/exception: Fix 0x1500 interrupt handler crash

[ Upstream commit 4557ac6b344b8cdf948ff8b007e8e1de34832f2e ]

A typo caused the interrupt handler to branch immediately to the
common "unknown interrupt" handler and skip the special case test for
denormal cause.

This does not affect KVM softpatch handling (e.g., for POWER9 TM
assist) because the KVM test was moved to common code by commit
9600f261acaa ("powerpc/64s/exception: Move KVM test to common code")
just before this bug was introduced.

Fixes: 3f7fbd97d07d ("powerpc/64s/exception: Clean up SRR specifiers")
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Paul Menzel <pmenzel@molgen.mpg.de>
[mpe: Split selftest into a separate patch]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200708074942.1713396-1-npiggin@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

ionic: centralize queue reset code

[ Upstream commit 086c18f2452d0028f81e319f098bcb8e53133dbf ]

The queue reset pattern is used in a couple different places,
only slightly different from each other, and could cause
issues if one gets changed and the other didn't.  This puts
them together so that only one version is needed, yet each
can have slighty different effects by passing in a pointer
to a work function to do whatever configuration twiddling is
needed in the middle of the reset.

This specifically addresses issues seen where under loops
of changing ring size or queue count parameters we could
occasionally bump into the netdev watchdog.

v2: added more commit message commentary

Fixes: 4d03e00a2140 ("ionic: Add initial ethtool support")
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: qed: fix buffer overflow on ethtool -d

[ Upstream commit da3287111ab43b32cec54d7ca6b48640f210a196 ]

When generating debug dump, driver firstly collects all data in binary
form, and then performs per-feature formatting to human-readable if it
is supported.

For ethtool -d, this is roughly incorrect for two reasons. First of all,
drivers should always provide only original raw dumps to Ethtool without
any changes.
The second, and more critical, is that Ethtool's output buffer size is
strictly determined by ethtool_ops::get_regs_len(), and all data *must*
fit in it. The current version of driver always returns the size of raw
data, but the size of the formatted buffer exceeds it in most cases.
This leads to out-of-bound writes and memory corruption.

Address both issues by adding an option to return original, non-formatted
debug data, and using it for Ethtool case.

v2:
 - Expand commit message to make it more clear;
 - No functional changes.

Fixes: c965db444629 ("qed: Add support for debug data collection")
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ipa: fix QMI structure definition bugs

[ Upstream commit 74478ea4ded519db35cb1f059948b1e713bb4abf ]

Building with "W=1" did exactly what it was supposed to do, namely
point out some suspicious-looking code to be verified not to contain
bugs.

Some QMI message structures defined in "ipa_qmi_msg.c" contained
some bad field names (duplicating the "elem_size" field instead of
defining the "offset" field), almost certainly due to copy/paste
errors that weren't obvious in a scan of the code.  Fix these bugs.

Fixes: 530f9216a953 ("soc: qcom: ipa: AP/modem communications")
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: compress: fix partial_drain completion state

[ Upstream commit f79a732a8325dfbd570d87f1435019d7e5501c6d ]

On partial_drain completion we should be in SNDRV_PCM_STATE_RUNNING
state, so set that for partially draining streams in
snd_compr_drain_notify() and use a flag for partially draining streams

While at it, add locks for stream state change in
snd_compr_drain_notify() as well.

Fixes: f44f2a5417b2 ("ALSA: compress: fix drain calls blocking other compress functions (v6)")
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20200629134737.105993-4-vkoul@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: hns3: fix use-after-free when doing self test

[ Upstream commit a06656211304fec653c1931c2ca6d644013b5bbb ]

Enable promisc mode of PF, set VF link state to enable, and
run iperf of the VF, then do self test of the PF. The self test
will fail with a low frequency, and may cause a use-after-free
problem.

[   87.142126] selftest:000004a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[   87.159722] ==================================================================
[   87.174187] BUG: KASAN: use-after-free in hex_dump_to_buffer+0x140/0x608
[   87.187600] Read of size 1 at addr ffff003b22828000 by task ethtool/1186
[   87.201012]
[   87.203978] CPU: 7 PID: 1186 Comm: ethtool Not tainted 5.5.0-rc4-gfd51c473-dirty #4
[   87.219306] Hardware name: Huawei TaiShan 2280 V2/BC82AMDA, BIOS TA BIOS 2280-A CS V2.B160.01 01/15/2020
[   87.238292] Call trace:
[   87.243173]  dump_backtrace+0x0/0x280
[   87.250491]  show_stack+0x24/0x30
[   87.257114]  dump_stack+0xe8/0x140
[   87.263911]  print_address_description.isra.8+0x70/0x380
[   87.274538]  __kasan_report+0x12c/0x230
[   87.282203]  kasan_report+0xc/0x18
[   87.288999]  __asan_load1+0x60/0x68
[   87.295969]  hex_dump_to_buffer+0x140/0x608
[   87.304332]  print_hex_dump+0x140/0x1e0
[   87.312000]  hns3_lb_check_skb_data+0x168/0x170
[   87.321060]  hns3_clean_rx_ring+0xa94/0xfe0
[   87.329422]  hns3_self_test+0x708/0x8c0

The length of packet sent by the selftest process is only
128 + 14 bytes, and the min buffer size of a BD is 256 bytes,
and the receive process will make sure the packet sent by
the selftest process is in the linear part, so only check
the linear part in hns3_lb_check_skb_data().

So fix this use-after-free by using skb_headlen() to dump
skb->data instead of skb->len.

Fixes: c39c4d98dc65 ("net: hns3: Add mac loopback selftest support in hns3 driver")
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: hns3: add a missing uninit debugfs when unload driver

[ Upstream commit e22b5e728bbb179b912d3a3cd5c25894a89a26a2 ]

When unloading driver, if flag HNS3_NIC_STATE_INITED has been
already cleared, the debugfs will not be uninitialized, so fix it.

Fixes: b2292360bb2a ("net: hns3: Add debugfs framework registration")
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: hns3: fix for mishandle of asserting VF reset fail

[ Upstream commit cddd5648926d7a6e84526dadd8bfb21609a14fb7 ]

When asserts VF reset fail, flag HCLGEVF_STATE_CMD_DISABLE
and handshake status should not set, otherwise the retry will
fail. So adds a check for asserting VF reset and returns
directly when fails.

Fixes: ef5f8e507ec9 ("net: hns3: stop handling command queue while resetting VF")
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: hns3: check reset pending after FLR prepare

[ Upstream commit bb3d866882c280a85e8950d4d72af1e294d2e69c ]

If there is a PF reset pending before FLR prepare, FLR's
preparatory work will not fail, but the FLR rebuild procedure
will fail for this pending. So this PF reset pending should
be handled in the FLR preparatory.

Fixes: 8627bdedc435 ("net: hns3: refactor the precedure of PF FLR")
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

smsc95xx: avoid memory leak in smsc95xx_bind

[ Upstream commit 3ed58f96a70b85ef646d5427258f677f1395b62f ]

In a case where the ID_REV register read is failed, the memory for a
private data structure has to be freed before returning error from the
function smsc95xx_bind.

Fixes: bbd9f9ee69242 ("smsc95xx: add wol support for more frame types")
Signed-off-by: Andre Edich <andre.edich@microchip.com>
Signed-off-by: Parthiban Veerasooran <Parthiban.Veerasooran@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

smsc95xx: check return value of smsc95xx_reset

[ Upstream commit 7c8b1e855f94f88a0c569be6309fc8d5c8844cd1 ]

The return value of the function smsc95xx_reset() must be checked
to avoid returning false success from the function smsc95xx_bind().

Fixes: 2f7ca802bdae2 ("net: Add SMSC LAN9500 USB2.0 10/100 ethernet adapter driver")
Signed-off-by: Andre Edich <andre.edich@microchip.com>
Signed-off-by: Parthiban Veerasooran <Parthiban.Veerasooran@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf intel-pt: Fix PEBS sample for XMM registers

[ Upstream commit 4c95ad261cfac120dd66238fcae222766754c219 ]

The condition to add XMM registers was missing, the regs array needed to
be in the outer scope, and the size of the regs array was too small.

Fixes: 143d34a6b387b ("perf intel-pt: Add XMM registers to synthesized PEBS sample")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Luwei Kang <luwei.kang@intel.com>
Link: http://lore.kernel.org/lkml/20200630133935.11150-4-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf intel-pt: Fix recording PEBS-via-PT with registers

[ Upstream commit 75bcb8776dc987538f267ba4ba05ca43fc2b1676 ]

When recording PEBS-via-PT, the kernel will not accept the intel_pt
event with register sampling e.g.

 # perf record --kcore -c 10000 -e '{intel_pt/branch=0/,branch-loads/aux-output/ppp}' -I -- ls -l
 Error:
 intel_pt/branch=0/: PMU Hardware doesn't support sampling/overflow-interrupts. Try 'perf stat'

Fix by suppressing register sampling on the intel_pt evsel.

Committer notes:

Adrian informed that this is only available from Tremont onwards, so on
older processors the error continues the same as before.

Fixes: 9e64cefe4335b ("perf intel-pt: Process options for PEBS event synthesis")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Luwei Kang <luwei.kang@intel.com>
Link: http://lore.kernel.org/lkml/20200630133935.11150-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf report TUI: Fix segmentation fault in perf_evsel__hists_browse()

[ Upstream commit d61cbb859b45fdb6b4997f2d51834fae41af0e94 ]

The segmentation fault can be reproduced as following steps:

1) Executing perf report in tui.

2) Typing '/xxxxx' to filter the symbol to get nothing matched.

3) Pressing enter with no entry selected.

Then it will report a segmentation fault.

It is caused by the lack of check of browser->he_selection when
accessing it's member res_samples in perf_evsel__hists_browse().

These processes are meaningful for specified samples, so we can skip
these when nothing is selected.

Fixes: 4968ac8fb7c3 ("perf report: Implement browsing of individual samples")
Signed-off-by: Wei Li <liwei391@huawei.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Link: http://lore.kernel.org/lkml/20200612094322.39565-1-liwei391@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: rmnet: do not allow to add multiple bridge interfaces

[ Upstream commit 2fb2799a2abb39d7dbb48abb3baa1133bf5e921a ]

rmnet can have only two bridge interface.
One of them is a link interface and another one is added by
the master operation.
rmnet interface shouldn't allow adding additional
bridge interfaces by mater operation.
But, there is no code to deny additional interfaces.
So, interface leak occurs.

Test commands:
    ip link add dummy0 type dummy
    ip link add dummy1 type dummy
    ip link add dummy2 type dummy
    ip link add rmnet0 link dummy0 type rmnet mux_id 1
    ip link set dummy1 master rmnet0
    ip link set dummy2 master rmnet0
    ip link del rmnet0

In the above test command, the dummy0 was attached to rmnet as VND mode.
Then, dummy1 was attached to rmnet0 as BRIDGE mode.
At this point, dummy0 mode is switched from VND to BRIDGE automatically.
Then, dummy2 is attached to rmnet as BRIDGE mode.
At this point, rmnet0 should deny this operation.
But, rmnet0 doesn't deny this.
So that below splat occurs when the rmnet0 interface is deleted.

Splat looks like:
[  186.684787][    C2] WARNING: CPU: 2 PID: 1009 at net/core/dev.c:8992 rollback_registered_many+0x986/0xcf0
[  186.684788][    C2] Modules linked in: rmnet dummy openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrag_x
[  186.684805][    C2] CPU: 2 PID: 1009 Comm: ip Not tainted 5.8.0-rc1+ #621
[  186.684807][    C2] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[  186.684808][    C2] RIP: 0010:rollback_registered_many+0x986/0xcf0
[  186.684811][    C2] Code: 41 8b 4e cc 45 31 c0 31 d2 4c 89 ee 48 89 df e8 e0 47 ff ff 85 c0 0f 84 cd fc ff ff 5
[  186.684812][    C2] RSP: 0018:ffff8880cd9472e0 EFLAGS: 00010287
[  186.684815][    C2] RAX: ffff8880cc56da58 RBX: ffff8880ab21c000 RCX: ffffffff9329d323
[  186.684816][    C2] RDX: 1ffffffff2be6410 RSI: 0000000000000008 RDI: ffffffff95f32080
[  186.684818][    C2] RBP: dffffc0000000000 R08: fffffbfff2be6411 R09: fffffbfff2be6411
[  186.684819][    C2] R10: ffffffff95f32087 R11: 0000000000000001 R12: ffff8880cd947480
[  186.684820][    C2] R13: ffff8880ab21c0b8 R14: ffff8880cd947400 R15: ffff8880cdf10640
[  186.684822][    C2] FS:  00007f00843890c0(0000) GS:ffff8880d4e00000(0000) knlGS:0000000000000000
[  186.684823][    C2] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  186.684825][    C2] CR2: 000055b8ab1077b8 CR3: 00000000ab612006 CR4: 00000000000606e0
[  186.684826][    C2] Call Trace:
[  186.684827][    C2]  ? lockdep_hardirqs_on_prepare+0x379/0x540
[  186.684829][    C2]  ? netif_set_real_num_tx_queues+0x780/0x780
[  186.684830][    C2]  ? rmnet_unregister_real_device+0x56/0x90 [rmnet]
[  186.684831][    C2]  ? __kasan_slab_free+0x126/0x150
[  186.684832][    C2]  ? kfree+0xdc/0x320
[  186.684834][    C2]  ? rmnet_unregister_real_device+0x56/0x90 [rmnet]
[  186.684835][    C2]  unregister_netdevice_many.part.135+0x13/0x1b0
[  186.684836][    C2]  rtnl_delete_link+0xbc/0x100
[ ... ]
[  238.440071][ T1009] unregister_netdevice: waiting for rmnet0 to become free. Usage count = 1

Fixes: 037f9cdf72fb ("net: rmnet: use upper/lower device infrastructure")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: rmnet: fix lower interface leak

[ Upstream commit 2a762e9e8cd1cf1242e4269a2244666ed02eecd1 ]

There are two types of the lower interface of rmnet that are VND
and BRIDGE.
Each lower interface can have only one type either VND or BRIDGE.
But, there is a case, which uses both lower interface types.
Due to this unexpected behavior, lower interface leak occurs.

Test commands:
    ip link add dummy0 type dummy
    ip link add dummy1 type dummy
    ip link add rmnet0 link dummy0 type rmnet mux_id 1
    ip link set dummy1 master rmnet0
    ip link add rmnet1 link dummy1 type rmnet mux_id 2
    ip link del rmnet0

The dummy1 was attached as BRIDGE interface of rmnet0.
Then, it also was attached as VND interface of rmnet1.
This is unexpected behavior and there is no code for handling this case.
So that below splat occurs when the rmnet0 interface is deleted.

Splat looks like:
[   53.254112][    C1] WARNING: CPU: 1 PID: 1192 at net/core/dev.c:8992 rollback_registered_many+0x986/0xcf0
[   53.254117][    C1] Modules linked in: rmnet dummy openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrag_ipv6 nfx
[   53.254182][    C1] CPU: 1 PID: 1192 Comm: ip Not tainted 5.8.0-rc1+ #620
[   53.254188][    C1] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[   53.254192][    C1] RIP: 0010:rollback_registered_many+0x986/0xcf0
[   53.254200][    C1] Code: 41 8b 4e cc 45 31 c0 31 d2 4c 89 ee 48 89 df e8 e0 47 ff ff 85 c0 0f 84 cd fc ff ff 0f 0b e5
[   53.254205][    C1] RSP: 0018:ffff888050a5f2e0 EFLAGS: 00010287
[   53.254214][    C1] RAX: ffff88805756d658 RBX: ffff88804d99c000 RCX: ffffffff8329d323
[   53.254219][    C1] RDX: 1ffffffff0be6410 RSI: 0000000000000008 RDI: ffffffff85f32080
[   53.254223][    C1] RBP: dffffc0000000000 R08: fffffbfff0be6411 R09: fffffbfff0be6411
[   53.254228][    C1] R10: ffffffff85f32087 R11: 0000000000000001 R12: ffff888050a5f480
[   53.254233][    C1] R13: ffff88804d99c0b8 R14: ffff888050a5f400 R15: ffff8880548ebe40
[   53.254238][    C1] FS:  00007f6b86b370c0(0000) GS:ffff88806c200000(0000) knlGS:0000000000000000
[   53.254243][    C1] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   53.254248][    C1] CR2: 0000562c62438758 CR3: 000000003f600005 CR4: 00000000000606e0
[   53.254253][    C1] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   53.254257][    C1] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   53.254261][    C1] Call Trace:
[   53.254266][    C1]  ? lockdep_hardirqs_on_prepare+0x379/0x540
[   53.254270][    C1]  ? netif_set_real_num_tx_queues+0x780/0x780
[   53.254275][    C1]  ? rmnet_unregister_real_device+0x56/0x90 [rmnet]
[   53.254279][    C1]  ? __kasan_slab_free+0x126/0x150
[   53.254283][    C1]  ? kfree+0xdc/0x320
[   53.254288][    C1]  ? rmnet_unregister_real_device+0x56/0x90 [rmnet]
[   53.254293][    C1]  unregister_netdevice_many.part.135+0x13/0x1b0
[   53.254297][    C1]  rtnl_delete_link+0xbc/0x100
[   53.254301][    C1]  ? rtnl_af_register+0xc0/0xc0
[   53.254305][    C1]  rtnl_dellink+0x2dc/0x840
[   53.254309][    C1]  ? find_held_lock+0x39/0x1d0
[   53.254314][    C1]  ? valid_fdb_dump_strict+0x620/0x620
[   53.254318][    C1]  ? rtnetlink_rcv_msg+0x457/0x890
[   53.254322][    C1]  ? lock_contended+0xd20/0xd20
[   53.254326][    C1]  rtnetlink_rcv_msg+0x4a8/0x890
[ ... ]
[   73.813696][ T1192] unregister_netdevice: waiting for rmnet0 to become free. Usage count = 1

Fixes: 037f9cdf72fb ("net: rmnet: use upper/lower device infrastructure")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: conntrack: refetch conntrack after nf_conntrack_update()

[ Upstream commit d005fbb855d3b5660d62ee5a6bd2d99c13ff8cf3 ]

__nf_conntrack_update() might refresh the conntrack object that is
attached to the skbuff. Otherwise, this triggers UAF.

[  633.200434] ==================================================================
[  633.200472] BUG: KASAN: use-after-free in nf_conntrack_update+0x34e/0x770 [nf_conntrack]
[  633.200478] Read of size 1 at addr ffff888370804c00 by task nfqnl_test/6769

[  633.200487] CPU: 1 PID: 6769 Comm: nfqnl_test Not tainted 5.8.0-rc2+ #388
[  633.200490] Hardware name: LENOVO 23259H1/23259H1, BIOS G2ET32WW (1.12 ) 05/30/2012
[  633.200491] Call Trace:
[  633.200499]  dump_stack+0x7c/0xb0
[  633.200526]  ? nf_conntrack_update+0x34e/0x770 [nf_conntrack]
[  633.200532]  print_address_description.constprop.6+0x1a/0x200
[  633.200539]  ? _raw_write_lock_irqsave+0xc0/0xc0
[  633.200568]  ? nf_conntrack_update+0x34e/0x770 [nf_conntrack]
[  633.200594]  ? nf_conntrack_update+0x34e/0x770 [nf_conntrack]
[  633.200598]  kasan_report.cold.9+0x1f/0x42
[  633.200604]  ? call_rcu+0x2c0/0x390
[  633.200633]  ? nf_conntrack_update+0x34e/0x770 [nf_conntrack]
[  633.200659]  nf_conntrack_update+0x34e/0x770 [nf_conntrack]
[  633.200687]  ? nf_conntrack_find_get+0x30/0x30 [nf_conntrack]

Closes: https://bugzilla.netfilter.org/show_bug.cgi?id=1436
Fixes: ee04805ff54a ("netfilter: conntrack: make conntrack userspace helpers work again")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: dsa: microchip: set the correct number of ports

[ Upstream commit af199a1a9cb02ec0194804bd46c174b6db262075 ]

The number of ports is incorrectly set to the maximum available for a DSA
switch. Even if the extra ports are not used, this causes some functions
to be called later, like port_disable() and port_stp_state_set(). If the
driver doesn't check the port index, it will end up modifying unknown
registers.

Fixes: b987e98e50ab ("dsa: add DSA switch driver for Microchip KSZ9477")
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

IB/sa: Resolv use-after-free in ib_nl_make_request()

[ Upstream commit f427f4d6214c183c474eeb46212d38e6c7223d6a ]

There is a race condition where ib_nl_make_request() inserts the request
data into the linked list but the timer in ib_nl_request_timeout() can see
it and destroy it before ib_nl_send_msg() is done touching it. This could
happen, for instance, if there is a long delay allocating memory during
nlmsg_new()

This causes a use-after-free in the send_mad() thread:

  [<ffffffffa02f43cb>] ? ib_pack+0x17b/0x240 [ib_core]
  [ <ffffffffa032aef1>] ib_sa_path_rec_get+0x181/0x200 [ib_sa]
  [<ffffffffa0379db0>] rdma_resolve_route+0x3c0/0x8d0 [rdma_cm]
  [<ffffffffa0374450>] ? cma_bind_port+0xa0/0xa0 [rdma_cm]
  [<ffffffffa040f850>] ? rds_rdma_cm_event_handler_cmn+0x850/0x850 [rds_rdma]
  [<ffffffffa040f22c>] rds_rdma_cm_event_handler_cmn+0x22c/0x850 [rds_rdma]
  [<ffffffffa040f860>] rds_rdma_cm_event_handler+0x10/0x20 [rds_rdma]
  [<ffffffffa037778e>] addr_handler+0x9e/0x140 [rdma_cm]
  [<ffffffffa026cdb4>] process_req+0x134/0x190 [ib_addr]
  [<ffffffff810a02f9>] process_one_work+0x169/0x4a0
  [<ffffffff810a0b2b>] worker_thread+0x5b/0x560
  [<ffffffff810a0ad0>] ? flush_delayed_work+0x50/0x50
  [<ffffffff810a68fb>] kthread+0xcb/0xf0
  [<ffffffff816ec49a>] ? __schedule+0x24a/0x810
  [<ffffffff816ec49a>] ? __schedule+0x24a/0x810
  [<ffffffff810a6830>] ? kthread_create_on_node+0x180/0x180
  [<ffffffff816f25a7>] ret_from_fork+0x47/0x90
  [<ffffffff810a6830>] ? kthread_create_on_node+0x180/0x180

The ownership rule is once the request is on the list, ownership transfers
to the list and the local thread can't touch it any more, just like for
the normal MAD case in send_mad().

Thus, instead of adding before send and then trying to delete after on
errors, move the entire thing under the spinlock so that the send and
update of the lists are atomic to the conurrent threads. Lightly reoganize
things so spinlock safe memory allocations are done in the final NL send
path and the rest of the setup work is done before and outside the lock.

Fixes: 3ebd2fd0d011 ("IB/sa: Put netlink request into the request list before sending")
Link: https://lore.kernel.org/r/1592964789-14533-1-git-send-email-divya.indi@oracle.com
Signed-off-by: Divya Indi <divya.indi@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/meson: viu: fix setting the OSD burst length in VIU_OSD1_FIFO_CTRL_STAT

[ Upstream commit 17f64701ea6f541db7eb5d7423a830cb929b3052 ]

The burst length is configured in VIU_OSD1_FIFO_CTRL_STAT[31] and
VIU_OSD1_FIFO_CTRL_STAT[11:10]. The public S905D3 datasheet describes
this as:
- 0x0 = up to 24 per burst
- 0x1 = up to 32 per burst
- 0x2 = up to 48 per burst
- 0x3 = up to 64 per burst
- 0x4 = up to 96 per burst
- 0x5 = up to 128 per burst

The lower two bits map to VIU_OSD1_FIFO_CTRL_STAT[11:10] while the upper
bit maps to VIU_OSD1_FIFO_CTRL_STAT[31].

Replace meson_viu_osd_burst_length_reg() with pre-defined macros which
set these values. meson_viu_osd_burst_length_reg() always returned 0
(for the two used values: 32 and 64 at least) and thus incorrectly set
the burst size to 24.

Fixes: 147ae1cbaa1842 ("drm: meson: viu: use proper macros instead of magic constants")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Christian Hewitt <christianshewitt@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200620155752.21065-1-martin.blumenstingl@googlemail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

btrfs: fix reclaim_size counter leak after stealing from global reserve

[ Upstream commit 6d548b9e5d56067cff17ff77585167cd65375e4b ]

Commit 7f9fe614407692 ("btrfs: improve global reserve stealing logic"),
added in the 5.8 merge window, introduced another leak for the space_info's
reclaim_size counter. This is very often triggered by the test cases
generic/269 and generic/416 from fstests, producing a stack trace like the
following during unmount:

[37079.155499] ------------[ cut here ]------------
[37079.156844] WARNING: CPU: 2 PID: 2000423 at fs/btrfs/block-group.c:3422 btrfs_free_block_groups+0x2eb/0x300 [btrfs]
[37079.158090] Modules linked in: dm_snapshot btrfs dm_thin_pool (...)
[37079.164440] CPU: 2 PID: 2000423 Comm: umount Tainted: G        W         5.7.0-rc7-btrfs-next-62 #1
[37079.165422] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), (...)
[37079.167384] RIP: 0010:btrfs_free_block_groups+0x2eb/0x300 [btrfs]
[37079.168375] Code: bd 58 ff ff ff 00 4c 8d (...)
[37079.170199] RSP: 0018:ffffaa53875c7de0 EFLAGS: 00010206
[37079.171120] RAX: ffff98099e701cf8 RBX: ffff98099e2d4000 RCX: 0000000000000000
[37079.172057] RDX: 0000000000000001 RSI: ffffffffc0acc5b1 RDI: 00000000ffffffff
[37079.173002] RBP: ffff98099e701cf8 R08: 0000000000000000 R09: 0000000000000000
[37079.173886] R10: 0000000000000000 R11: 0000000000000000 R12: ffff98099e701c00
[37079.174730] R13: ffff98099e2d5100 R14: dead000000000122 R15: dead000000000100
[37079.175578] FS:  00007f4d7d0a5840(0000) GS:ffff9809ec600000(0000) knlGS:0000000000000000
[37079.176434] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[37079.177289] CR2: 0000559224dcc000 CR3: 000000012207a004 CR4: 00000000003606e0
[37079.178152] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[37079.178935] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[37079.179675] Call Trace:
[37079.180419]  close_ctree+0x291/0x2d1 [btrfs]
[37079.181162]  generic_shutdown_super+0x6c/0x100
[37079.181898]  kill_anon_super+0x14/0x30
[37079.182641]  btrfs_kill_super+0x12/0x20 [btrfs]
[37079.183371]  deactivate_locked_super+0x31/0x70
[37079.184012]  cleanup_mnt+0x100/0x160
[37079.184650]  task_work_run+0x68/0xb0
[37079.185284]  exit_to_usermode_loop+0xf9/0x100
[37079.185920]  do_syscall_64+0x20d/0x260
[37079.186556]  entry_SYSCALL_64_after_hwframe+0x49/0xb3
[37079.187197] RIP: 0033:0x7f4d7d2d9357
[37079.187836] Code: eb 0b 00 f7 d8 64 89 01 48 (...)
[37079.189180] RSP: 002b:00007ffee4e0d368 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6
[37079.189845] RAX: 0000000000000000 RBX: 00007f4d7d3fb224 RCX: 00007f4d7d2d9357
[37079.190515] RDX: ffffffffffffff78 RSI: 0000000000000000 RDI: 0000559224dc5c90
[37079.191173] RBP: 0000559224dc1970 R08: 0000000000000000 R09: 00007ffee4e0c0e0
[37079.191815] R10: 0000559224dc7b00 R11: 0000000000000246 R12: 0000000000000000
[37079.192451] R13: 0000559224dc5c90 R14: 0000559224dc1a80 R15: 0000559224dc1ba0
[37079.193096] irq event stamp: 0
[37079.193729] hardirqs last  enabled at (0): [<0000000000000000>] 0x0
[37079.194379] hardirqs last disabled at (0): [<ffffffff97ab8935>] copy_process+0x755/0x1ea0
[37079.195033] softirqs last  enabled at (0): [<ffffffff97ab8935>] copy_process+0x755/0x1ea0
[37079.195700] softirqs last disabled at (0): [<0000000000000000>] 0x0
[37079.196318] ---[ end trace b32710d864dea887 ]---

In the past commit d611add48b717a ("btrfs: fix reclaim counter leak of
space_info objects") fixed similar cases. That commit however has a date
more recent (April 7 2020) then the commit mentioned before (March 13
2020), however it was merged in kernel 5.7 while the older commit, which
introduces a new leak, was merged only in the 5.8 merge window. So the
leak sneaked in unnoticed.

Fix this by making steal_from_global_rsv() remove the ticket using the
helper remove_ticket(), which decrements the reclaim_size counter of the
space_info object.

Fixes: 7f9fe614407692 ("btrfs: improve global reserve stealing logic")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: cxgb4: fix return error value in t4_prep_fw

[ Upstream commit 8a259e6b73ad8181b0b2ef338b35043433db1075 ]

t4_prep_fw goto bye tag with positive return value when something
bad happened and which can not free resource in adap_init0.
so fix it to return negative value.

Fixes: 16e47624e76b ("cxgb4: Add new scheme to update T4/T5 firmware")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Li Heng <liheng40@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ipa: no checksum offload for SDM845 LAN RX

[ Upstream commit 41af5436e857ec64f302fcc9b6e4a8c526b6b402 ]

The AP LAN RX endpoint should not have download checksum offload
enabled.

The receive handler does properly accommodate the trailer that's
added by the hardware, but we ignore it.

Fixes: 1ed7d0c0fdba ("soc: qcom: ipa: configuration data")
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: mvneta: fix use of state->speed

[ Upstream commit f2ca673d2cd5df9a76247b670e9ffd4d63682b3f ]

When support for short preambles was added, it incorrectly keyed its
decision off state->speed instead of state->interface.  state->speed
is not guaranteed to be correct for in-band modes, which can lead to
short preambles being unexpectedly disabled.

Fix this by keying off the interface mode, which is the only way that
mvneta can operate at 2.5Gbps.

Fixes: da58a931f248 ("net: mvneta: Add support for 2500Mbps SGMII")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: ipset: call ip_set_free() instead of kfree()

[ Upstream commit c4e8fa9074ad94f80e5c0dcaa16b313e50e958c5 ]

Whenever ip_set_alloc() is used, allocated memory can either
use kmalloc() or vmalloc(). We should call kvfree() or
ip_set_free()

invalid opcode: 0000 [#1] PREEMPT SMP KASAN
CPU: 0 PID: 21935 Comm: syz-executor.3 Not tainted 5.8.0-rc2-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:__phys_addr+0xa7/0x110 arch/x86/mm/physaddr.c:28
Code: 1d 7a 09 4c 89 e3 31 ff 48 d3 eb 48 89 de e8 d0 58 3f 00 48 85 db 75 0d e8 26 5c 3f 00 4c 89 e0 5b 5d 41 5c c3 e8 19 5c 3f 00 <0f> 0b e8 12 5c 3f 00 48 c7 c0 10 10 a8 89 48 ba 00 00 00 00 00 fc
RSP: 0000:ffffc900018572c0 EFLAGS: 00010046
RAX: 0000000000040000 RBX: 0000000000000001 RCX: ffffc9000fac3000
RDX: 0000000000040000 RSI: ffffffff8133f437 RDI: 0000000000000007
RBP: ffffc90098aff000 R08: 0000000000000000 R09: ffff8880ae636cdb
R10: 0000000000000000 R11: 0000000000000000 R12: 0000408018aff000
R13: 0000000000080000 R14: 000000000000001d R15: ffffc900018573d8
FS:  00007fc540c66700(0000) GS:ffff8880ae600000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fc9dcd67200 CR3: 0000000059411000 CR4: 00000000001406f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 virt_to_head_page include/linux/mm.h:841 [inline]
 virt_to_cache mm/slab.h:474 [inline]
 kfree+0x77/0x2c0 mm/slab.c:3749
 hash_net_create+0xbb2/0xd70 net/netfilter/ipset/ip_set_hash_gen.h:1536
 ip_set_create+0x6a2/0x13c0 net/netfilter/ipset/ip_set_core.c:1128
 nfnetlink_rcv_msg+0xbe8/0xea0 net/netfilter/nfnetlink.c:230
 netlink_rcv_skb+0x15a/0x430 net/netlink/af_netlink.c:2469
 nfnetlink_rcv+0x1ac/0x420 net/netfilter/nfnetlink.c:564
 netlink_unicast_kernel net/netlink/af_netlink.c:1303 [inline]
 netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1329
 netlink_sendmsg+0x856/0xd90 net/netlink/af_netlink.c:1918
 sock_sendmsg_nosec net/socket.c:652 [inline]
 sock_sendmsg+0xcf/0x120 net/socket.c:672
 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2352
 ___sys_sendmsg+0xf3/0x170 net/socket.c:2406
 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2439
 do_syscall_64+0x60/0xe0 arch/x86/entry/common.c:359
 entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x45cb19
Code: Bad RIP value.
RSP: 002b:00007fc540c65c78 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00000000004fed80 RCX: 000000000045cb19
RDX: 0000000000000000 RSI: 0000000020001080 RDI: 0000000000000003
RBP: 000000000078bf00 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff
R13: 000000000000095e R14: 00000000004cc295 R15: 00007fc540c666d4

Fixes: f66ee0410b1c ("netfilter: ipset: Fix "INFO: rcu detected stall in hash_xxx" reports")
Fixes: 03c8b234e61a ("netfilter: ipset: Generalize extensions support")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf, sockmap: RCU dereferenced psock may be used outside RCU block

[ Upstream commit 8025751d4d55a2f32be6bdf825b6a80c299875f5 ]

If an ingress verdict program specifies message sizes greater than
skb->len and there is an ENOMEM error due to memory pressure we
may call the rcv_msg handler outside the strp_data_ready() caller
context. This is because on an ENOMEM error the strparser will
retry from a workqueue. The caller currently protects the use of
psock by calling the strp_data_ready() inside a rcu_read_lock/unlock
block.

But, in above workqueue error case the psock is accessed outside
the read_lock/unlock block of the caller. So instead of using
psock directly we must do a look up against the sk again to
ensure the psock is available.

There is an an ugly piece here where we must handle
the case where we paused the strp and removed the psock. On
psock removal we first pause the strparser and then remove
the psock. If the strparser is paused while an skb is
scheduled on the workqueue the skb will be dropped on the
flow and kfree_skb() is called. If the workqueue manages
to get called before we pause the strparser but runs the rcvmsg
callback after the psock is removed we will hit the unlikely
case where we run the sockmap rcvmsg handler but do not have
a psock. For now we will follow strparser logic and drop the
skb on the floor with skb_kfree(). This is ugly because the
data is dropped. To date this has not caused problems in practice
because either the application controlling the sockmap is
coordinating with the datapath so that skbs are "flushed"
before removal or we simply wait for the sock to be closed before
removing it.

This patch fixes the describe RCU bug and dropping the skb doesn't
make things worse. Future patches will improve this by allowing
the normal case where skbs are not merged to skip the strparser
altogether. In practice many (most?) use cases have no need to
merge skbs so its both a code complexity hit as seen above and
a performance issue. For example, in the Cilium case we always
set the strparser up to return sbks 1:1 without any merging and
have avoided above issues.

Fixes: e91de6afa81c1 ("bpf: Fix running sk_skb program types with ktls")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/159312679888.18340.15248924071966273998.stgit@john-XPS-13-9370
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf, sockmap: RCU splat with redirect and strparser error or TLS

[ Upstream commit 93dd5f185916b05e931cffae636596f21f98546e ]

There are two paths to generate the below RCU splat the first and
most obvious is the result of the BPF verdict program issuing a
redirect on a TLS socket (This is the splat shown below). Unlike
the non-TLS case the caller of the *strp_read() hooks does not
wrap the call in a rcu_read_lock/unlock. Then if the BPF program
issues a redirect action we hit the RCU splat.

However, in the non-TLS socket case the splat appears to be
relatively rare, because the skmsg caller into the strp_data_ready()
is wrapped in a rcu_read_lock/unlock. Shown here,

 static void sk_psock_strp_data_ready(struct sock *sk)
 {
struct sk_psock *psock;

rcu_read_lock();
psock = sk_psock(sk);
if (likely(psock)) {
if (tls_sw_has_ctx_rx(sk)) {
psock->parser.saved_data_ready(sk);
} else {
write_lock_bh(&sk->sk_callback_lock);
strp_data_ready(&psock->parser.strp);
write_unlock_bh(&sk->sk_callback_lock);
}
}
rcu_read_unlock();
 }

If the above was the only way to run the verdict program we
would be safe. But, there is a case where the strparser may throw an
ENOMEM error while parsing the skb. This is a result of a failed
skb_clone, or alloc_skb_for_msg while building a new merged skb when
the msg length needed spans multiple skbs. This will in turn put the
skb on the strp_wrk workqueue in the strparser code. The skb will
later be dequeued and verdict programs run, but now from a
different context without the rcu_read_lock()/unlock() critical
section in sk_psock_strp_data_ready() shown above. In practice
I have not seen this yet, because as far as I know most users of the
verdict programs are also only working on single skbs. In this case no
merge happens which could trigger the above ENOMEM errors. In addition
the system would need to be under memory pressure. For example, we
can't hit the above case in selftests because we missed having tests
to merge skbs. (Added in later patch)

To fix the below splat extend the rcu_read_lock/unnlock block to
include the call to sk_psock_tls_verdict_apply(). This will fix both
TLS redirect case and non-TLS redirect+error case. Also remove
psock from the sk_psock_tls_verdict_apply() function signature its
not used there.

[ 1095.937597] WARNING: suspicious RCU usage
[ 1095.940964] 5.7.0-rc7-02911-g463bac5f1ca79 #1 Tainted: G        W
[ 1095.944363] -----------------------------
[ 1095.947384] include/linux/skmsg.h:284 suspicious rcu_dereference_check() usage!
[ 1095.950866]
[ 1095.950866] other info that might help us debug this:
[ 1095.950866]
[ 1095.957146]
[ 1095.957146] rcu_scheduler_active = 2, debug_locks = 1
[ 1095.961482] 1 lock held by test_sockmap/15970:
[ 1095.964501]  #0: ffff9ea6b25de660 (sk_lock-AF_INET){+.+.}-{0:0}, at: tls_sw_recvmsg+0x13a/0x840 [tls]
[ 1095.968568]
[ 1095.968568] stack backtrace:
[ 1095.975001] CPU: 1 PID: 15970 Comm: test_sockmap Tainted: G        W         5.7.0-rc7-02911-g463bac5f1ca79 #1
[ 1095.977883] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
[ 1095.980519] Call Trace:
[ 1095.982191]  dump_stack+0x8f/0xd0
[ 1095.984040]  sk_psock_skb_redirect+0xa6/0xf0
[ 1095.986073]  sk_psock_tls_strp_read+0x1d8/0x250
[ 1095.988095]  tls_sw_recvmsg+0x714/0x840 [tls]

v2: Improve commit message to identify non-TLS redirect plus error case
    condition as well as more common TLS case. In the process I decided
    doing the rcu_read_unlock followed by the lock/unlock inside branches
    was unnecessarily complex. We can just extend the current rcu block
    and get the same effeective without the shuffling and branching.
    Thanks Martin!

Fixes: e91de6afa81c1 ("bpf: Fix running sk_skb program types with ktls")
Reported-by: Jakub Sitnicki <jakub@cloudflare.com>
Reported-by: kernel test robot <rong.a.chen@intel.com>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/159312677907.18340.11064813152758406626.stgit@john-XPS-13-9370
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/mediatek: Check plane visibility in atomic_update

[ Upstream commit c0b8892e2461b5fa740e47efbb1269a487b04020 ]

Disable the plane if it's not visible. Otherwise mtk_ovl_layer_config()
would proceed with invalid plane and we may see vblank timeout.

Fixes: 119f5173628a ("drm/mediatek: Add DRM Driver for Mediatek SoC MT8173.")
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nl80211: fix memory leak when parsing NL80211_ATTR_HE_BSS_COLOR

[ Upstream commit 60a0121f8fa64b0f4297aa6fef8207500483a874 ]

If there is an error when parsing the NL80211_ATTR_HE_BSS_COLOR
attribute, we return immediately without freeing param.acl.  Fit it by
using goto out instead of returning immediately.

Fixes: 5c5e52d1bb96 ("nl80211: add handling for BSS color")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20200626124931.7ad2a3eb894f.I60905fb70bd20389a3b170db515a07275e31845e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nl80211: don't return err unconditionally in nl80211_start_ap()

[ Upstream commit bc7a39b4272b9672d806d422b6850e8c1a09914c ]

When a memory leak was fixed, a return err was changed to goto err,
but, accidentally, the if (err) was removed, so now we always exit at
this point.

Fix it by adding if (err) back.

Fixes: 9951ebfcdf2b ("nl80211: fix potential leak in AP start")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20200626124931.871ba5b31eee.I97340172d92164ee92f3c803fe20a8a6e97714e1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: Do not allow btf_ctx_access with __int128 types

[ Upstream commit a9b59159d338d414acaa8e2f569d129d51c76452 ]

To ensure btf_ctx_access() is safe the verifier checks that the BTF
arg type is an int, enum, or pointer. When the function does the
BTF arg lookup it uses the calculation 'arg = off / 8'  using the
fact that registers are 8B. This requires that the first arg is
in the first reg, the second in the second, and so on. However,
for __int128 the arg will consume two registers by default LLVM
implementation. So this will cause the arg layout assumed by the
'arg = off / 8' calculation to be incorrect.

Because __int128 is uncommon this patch applies the easiest fix and
will force int types to be sizeof(u64) or smaller so that they will
fit in a single register.

v2: remove unneeded parens per Andrii's feedback

Fixes: 9e15db66136a1 ("bpf: Implement accurate raw_tp context access via BTF")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/159303723962.11287.13309537171132420717.stgit@john-Precision-5820-Tower
Signed-off-by: Sasha Levin <sashal@kernel.org>

mac80211: Fix dropping broadcast packets in 802.11 encap

[ Upstream commit 78fb5b541b7ae57ac39187ccb3097e606004cf9b ]

Broadcast pkts like arp are getting dropped in 'ieee80211_8023_xmit'.
Fix this by replacing is_valid_ether_addr api with is_zero_ether_addr.

Fixes: 50ff477a8639 ("mac80211: add 802.11 encapsulation offloading support")
Signed-off-by: Seevalamuthu Mariappan <seevalam@codeaurora.org>
Link: https://lore.kernel.org/r/1591697754-4975-1-git-send-email-seevalam@codeaurora.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: arm64: vgic-v4: Plug race between non-residency and v4.1 doorbell

[ Upstream commit a3f574cd65487cd993f79ab235d70229d9302c1e ]

When making a vPE non-resident because it has hit a blocking WFI,
the doorbell can fire at any time after the write to the RD.
Crucially, it can fire right between the write to GICR_VPENDBASER
and the write to the pending_last field in the its_vpe structure.

This means that we would overwrite pending_last with stale data,
and potentially not wakeup until some unrelated event (such as
a timer interrupt) puts the vPE back on the CPU.

GICv4 isn't affected by this as we actively mask the doorbell on
entering the guest, while GICv4.1 automatically manages doorbell
delivery without any hypervisor-driven masking.

Use the vpe_lock to synchronize such update, which solves the
problem altogether.

Fixes: ae699ad348cdc ("irqchip/gic-v4.1: Move doorbell management to the GICv4 abstraction layer")
Reported-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: fsl_mqs: Fix unchecked return value for clk_prepare_enable

[ Upstream commit 15217d170a4461c1d4c1ea7c497e1fc1122e42a9 ]

Fix unchecked return value for clk_prepare_enable, add error
handler in fsl_mqs_runtime_resume.

Fixes: 9e28f6532c61 ("ASoC: fsl_mqs: Add MQS component driver")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/5edd68d03def367d96268f1a9a00bd528ea5aaf2.1592888591.git.shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: fsl_mqs: Don't check clock is NULL before calling clk API

[ Upstream commit adf46113a608d9515801997fc96cbfe8ffa89ed3 ]

Because clk_prepare_enable and clk_disable_unprepare should
check input clock parameter is NULL or not internally, then
we don't need to check them before calling the function.

Fixes: 9e28f6532c61 ("ASoC: fsl_mqs: Add MQS component driver")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/743be216bd504c26e8d45d5ce4a84561b67a122b.1592888591.git.shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gpio: pca953x: Fix GPIO resource leak on Intel Galileo Gen 2

[ Upstream commit 5d8913504ccfeea6120df5ae1c6f4479ff09b931 ]

When adding a quirk for IRQ on Intel Galileo Gen 2 the commit ba8c90c61847
("gpio: pca953x: Override IRQ for one of the expanders on Galileo Gen 2")
missed GPIO resource release. We can safely do this in the same quirk, since
IRQ will be locked by GPIO framework when requested and unlocked on freeing.

Fixes: ba8c90c61847 ("gpio: pca953x: Override IRQ for one of the expanders on Galileo Gen 2")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gpio: pca953x: Fix direction setting when configure an IRQ

[ Upstream commit 0b22c25e1b81c5f718e89c4d759e6a359be24417 ]

The commit 0f25fda840a9 ("gpio: pca953x: Zap ad-hoc reg_direction cache")
seems inadvertently made a typo in pca953x_irq_bus_sync_unlock().

When the direction bit is 1 it means input, and the piece of code in question
was looking for output ones that should be turned to inputs.

Fix direction setting when configure an IRQ by injecting a bitmap complement
operation.

Fixes: 0f25fda840a9 ("gpio: pca953x: Zap ad-hoc reg_direction cache")
Depends-on: 35d13d94893f ("gpio: pca953x: convert to use bitmap API")
Cc: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gpio: pca953x: Override IRQ for one of the expanders on Galileo Gen 2

[ Upstream commit ba8c90c6184784b397807b72403656085ac2f8c1 ]

ACPI table on Intel Galileo Gen 2 has wrong pin number for IRQ resource
of one of the I²C GPIO expanders. Since we know what that number is and
luckily have GPIO bases fixed for SoC's controllers, we may use a simple
DMI quirk to match the platform and retrieve GpioInt() pin on it for
the expander in question.

Mika suggested the way to avoid a quirk in the GPIO ACPI library and
here is the second, almost rewritten version of it.

Fixes: f32517bf1ae0 ("gpio: pca953x: support ACPI devices found on Galileo Gen2")
Depends-on: 25e3ef894eef ("gpio: acpi: Split out acpi_gpio_get_irq_resource() helper")
Suggested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gpio: pca953x: Synchronize interrupt handler properly

[ Upstream commit 064c73afe7385de99e5b2785b88c83dc5d84403b ]

Since the commit aa58a21ae378 ("gpio: pca953x: disable regmap locking")
the locking of regmap is disabled and that immediately introduces
a synchronization issue. It's easy to see when we try to monitor
more than one interrupt from the same chip.

It seems that the problem exists from the day one and even commit
6e20fb18054c ("drivers/gpio/pca953x.c: add a mutex to fix race condition")
missed this.

Below are the traces and shell reproducers before and after proposed change.
Note duplicates in the IRQ events. /proc/interrupts also shows a deviation,
i.e. sum of children interrupts higher than parent's one.

When locking is disabled for regmap and no protection in IRQ handler
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 ...
 gpioset-194          regmap_hw_write_start: i2c-INT3491:02 reg=2 count=1
 irq/31-i2c-INT3-139  regmap_hw_read_start: i2c-INT3491:02 reg=4c count=2
 gpioset-194          regmap_hw_write_done: i2c-INT3491:02 reg=2 count=1
 gpioset-194          regmap_reg_read_cache: i2c-INT3491:02 reg=6 val=f5
 gpioset-194          regmap_reg_write: i2c-INT3491:02 reg=6 val=f5
 gpioset-194          regmap_hw_write_start: i2c-INT3491:02 reg=6 count=1
 irq/31-i2c-INT3-139  regmap_hw_read_done: i2c-INT3491:02 reg=4c count=2
 ...

 % gpiomon gpiochip3 0 &
 % gpioset gpiochip3 1=0
 % gpioset gpiochip3 1=1
 event:  RISING EDGE offset: 0 timestamp: [     302.782583765]
 % gpiomon gpiochip3 2 &
 % gpioset gpiochip3 1=0
 event:  RISING EDGE offset: 2 timestamp: [     312.033148829]
 event: FALLING EDGE offset: 0 timestamp: [     312.022757525]
 % gpioset gpiochip3 1=1
 event:  RISING EDGE offset: 2 timestamp: [     316.201148473]
 event:  RISING EDGE offset: 0 timestamp: [     316.191759599]

When locking is disabled for regmap and protection in IRQ handler
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 ...
 gpioset-202          regmap_hw_write_start: i2c-INT3491:02 reg=2 count=1
 gpioset-202          regmap_hw_write_done: i2c-INT3491:02 reg=2 count=1
 gpioset-202          regmap_reg_read_cache: i2c-INT3491:02 reg=6 val=fd
 gpioset-202          regmap_reg_write: i2c-INT3491:02 reg=6 val=fd
 gpioset-202          regmap_hw_write_start: i2c-INT3491:02 reg=6 count=1
 gpioset-202          regmap_hw_write_done: i2c-INT3491:02 reg=6 count=1
 irq/31-i2c-INT3-139  regmap_hw_read_start: i2c-INT3491:02 reg=4c count=2
 irq/31-i2c-INT3-139  regmap_hw_read_done: i2c-INT3491:02 reg=4c count=2
 ...

 % gpiomon gpiochip3 0 &
 % gpioset gpiochip3 1=0
 event: FALLING EDGE offset: 0 timestamp: [     531.330078107]
 % gpioset gpiochip3 1=1
 event:  RISING EDGE offset: 0 timestamp: [     532.912239128]
 % gpiomon gpiochip3 2 &
 % gpioset gpiochip3 1=0
 event: FALLING EDGE offset: 0 timestamp: [     539.633669484]
 % gpioset gpiochip3 1=1
 event:  RISING EDGE offset: 0 timestamp: [     542.256978461]

Fixes: 6e20fb18054c ("drivers/gpio/pca953x.c: add a mutex to fix race condition")
Depends-on: 35d13d94893f ("gpio: pca953x: convert to use bitmap API")
Depends-on: 49427232764d ("gpio: pca953x: Perform basic regmap conversion")
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Roland Stigge <stigge@antcom.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mtd: set master partition panic write flag

[ Upstream commit 630e8d5507d9f55dfa98134bfcadefb6cfba4fbb ]

Check and set master panic write flag so that low level drivers
can use it to take required action to ensure oops data gets written
to assigned mtdoops device partition.

Fixes: 9f897bfdd89f ("mtd: Add flag to indicate panic_write")
Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200615155134.32007-1-kdasu.kdev@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: qrtr: Fix an out of bounds read qrtr_endpoint_post()

commit 8ff41cc21714704ef0158a546c3c4d07fae2c952 upstream.

This code assumes that the user passed in enough data for a
qrtr_hdr_v1 or qrtr_hdr_v2 struct, but it's not necessarily true.  If
the buffer is too small then it will read beyond the end.

Reported-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reported-by: syzbot+b8fe393f999a291a9ea6@syzkaller.appspotmail.com
Fixes: 194ccc88297a ("net: qrtr: Support decoding incoming v2 packets")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sched/core: Check cpus_mask, not cpus_ptr in __set_cpus_allowed_ptr(), to fix mask corruption

[ Upstream commit fd844ba9ae59b51e34e77105d79f8eca780b3bd6 ]

This function is concerned with the long-term CPU mask, not the
transitory mask the task might have while migrate disabled.  Before
this patch, if a task was migrate-disabled at the time
__set_cpus_allowed_ptr() was called, and the new mask happened to be
equal to the CPU that the task was running on, then the mask update
would be lost.

Signed-off-by: Scott Wood <swood@redhat.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20200617121742.cpxppyi7twxmpin7@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>

nfs: Fix memory leak of export_path

[ Upstream commit 4659ed7cc8514369043053463514408ca16ad6f3 ]

The try_location function is called within a loop by nfs_follow_referral.
try_location calls nfs4_pathname_string to created the export_path.
nfs4_pathname_string allocates the memory. export_path is stored in the
nfs_fs_context/fs_context structure similarly as hostname and source.
But whereas the ctx hostname and source are freed before assignment,
export_path is not.  So if there are multiple loops, the new export_path
will overwrite the old without the old being freed.

So call kfree for export_path.

Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: Add KRYO{3,4}XX silver CPU cores to SSB safelist

[ Upstream commit 108447fd0d1a34b0929cd26dc637c917a734ebab ]

QCOM KRYO{3,4}XX silver/LITTLE CPU cores are based on
Cortex-A55 and are SSB safe, hence add them to SSB
safelist -> arm64_ssb_cpus[].

Reported-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20200625103123.7240-1-saiprakash.ranjan@codeaurora.org
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/entry: Increase entry_stack size to a full page

[ Upstream commit c7aadc09321d8f9a1d3bd1e6d8a47222ecddf6c5 ]

Marco crashed in bad_iret with a Clang11/KCSAN build due to
overflowing the stack. Now that we run C code on it, expand it to a
full page.

Suggested-by: Andy Lutomirski <luto@amacapital.net>
Reported-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com>
Tested-by: Marco Elver <elver@google.com>
Link: https://lkml.kernel.org/r/20200618144801.819246178@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvme-rdma: assign completion vector correctly

[ Upstream commit 032a9966a22a3596addf81dacf0c1736dfedc32a ]

The completion vector index that is given during CQ creation can't
exceed the number of support vectors by the underlying RDMA device. This
violation currently can accure, for example, in case one will try to
connect with N regular read/write queues and M poll queues and the sum
of N + M > num_supported_vectors. This will lead to failure in establish
a connection to remote target. Instead, in that case, share a completion
vector between queues.

Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

block: release bip in a right way in error path

[ Upstream commit 0b8eb629a700c0ef15a437758db8255f8444e76c ]

Release bip using kfree() in error path when that was allocated
by kmalloc().

Signed-off-by: Chengguang Xu <cgxu519@mykernel.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: kpti: Add KRYO{3, 4}XX silver CPU cores to kpti safelist

[ Upstream commit f4617be35b4b547e82d30993f56d631dfc2d5f88 ]

QCOM KRYO{3,4}XX silver/LITTLE CPU cores are based on Cortex-A55
and are meltdown safe, hence add them to kpti_safe_list[].

Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Link: https://lore.kernel.org/r/20200624123406.3472-1-saiprakash.ranjan@codeaurora.org
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: dwc3: pci: Fix reference count leak in dwc3_pci_resume_work

[ Upstream commit 2655971ad4b34e97dd921df16bb0b08db9449df7 ]

dwc3_pci_resume_work() calls pm_runtime_get_sync() that increments
the reference counter. In case of failure, decrement the reference
before returning.

Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: mptscsih: Fix read sense data size

[ Upstream commit afe89f115e84edbc76d316759e206580a06c6973 ]

The sense data buffer in sense_buf_pool is allocated with size of
MPT_SENSE_BUFFER_ALLOC(64) (multiplied by req_depth) while SNS_LEN(sc)(96)
is used when reading the data.  That may lead to a read from unallocated
area, sometimes from another (unallocated) page.  To fix this, limit the
read size to MPT_SENSE_BUFFER_ALLOC.

Link: https://lore.kernel.org/r/20200616150446.4840-1-thenzl@redhat.com
Co-developed-by: Stanislav Saner <ssaner@redhat.com>
Signed-off-by: Stanislav Saner <ssaner@redhat.com>
Signed-off-by: Tomas Henzl <thenzl@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: qla2xxx: Fix MPI failure AEN (8200) handling

[ Upstream commit cbb01c2f2f630f1497f703c51ff21538ae2d86b8 ]

Today, upon an MPI failure AEN, on top of collecting an MPI dump, a regular
firmware dump is also taken and then chip reset. This is disruptive to IOs
and not required. Make the firmware dump collection, followed by chip
reset, optional (not done by default).

Firmware dump buffer and MPI dump buffer are independent of each
other with this change and each can have dump that was taken at two
different times for two different issues. The MPI dump is saved in a
separate buffer and is retrieved differently from firmware dump.

To collect full dump on MPI failure AEN, a module parameter is
introduced:
    ql2xfulldump_on_mpifail (default: 0)

Link: https://lore.kernel.org/r/20200331104015.24868-2-njavali@marvell.com
Reported-by: kbuild test robot <lkp@intel.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: imx6: add missing put_device() call in imx6q_suspend_init()

[ Upstream commit 4845446036fc9c13f43b54a65c9b757c14f5141b ]

if of_find_device_by_node() succeed, imx6q_suspend_init() doesn't have a
corresponding put_device(). Thus add a jump target to fix the exception
handling for this function implementation.

Signed-off-by: yu kuai <yukuai3@huawei.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cifs: update ctime and mtime during truncate

[ Upstream commit 5618303d8516f8ac5ecfe53ee8e8bc9a40eaf066 ]

As the man description of the truncate, if the size changed,
then the st_ctime and st_mtime fields should be updated. But
in cifs, we doesn't do it.

It lead the xfstests generic/313 failed.

So, add the ATTR_MTIME|ATTR_CTIME flags on attrs when change
the file size

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390/kasan: fix early pgm check handler execution

[ Upstream commit 998f5bbe3dbdab81c1cfb1aef7c3892f5d24f6c7 ]

Currently if early_pgm_check_handler is called it ends up in pgm check
loop. The problem is that early_pgm_check_handler is instrumented by
KASAN but executed without DAT flag enabled which leads to addressing
exception when KASAN checks try to access shadow memory.

Fix that by executing early handlers with DAT flag on under KASAN as
expected.

Reported-and-tested-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm: panel-orientation-quirks: Use generic orientation-data for Acer S1003

[ Upstream commit a05caf9e62a85d12da27e814ac13195f4683f21c ]

The Acer S1003 has proper DMI strings for sys-vendor and product-name,
so we do not need to match by BIOS-date.

This means that the Acer S1003 can use the generic lcd800x1280_rightside_up
drm_dmi_panel_orientation_data struct which is also used by other quirks.

Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200531093025.28050-2-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm: panel-orientation-quirks: Add quirk for Asus T101HA panel

[ Upstream commit 6c22bc18a3b93a38018844636557ad02e588e055 ]

Like the Asus T100HA the Asus T101HA also uses a panel which has been
mounted 90 degrees rotated, albeit in the opposite direction.
Add a quirk for this.

Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200531093025.28050-1-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/vt-d: Don't apply gfx quirks to untrusted devices

[ Upstream commit 67e8a5b18d41af9298db5c17193f671f235cce01 ]

Currently, an external malicious PCI device can masquerade the VID:PID
of faulty gfx devices, and thus apply iommu quirks to effectively
disable the IOMMU restrictions for itself.

Thus we need to ensure that the device we are applying quirks to, is
indeed an internal trusted device.

Signed-off-by: Rajat Jain <rajatja@google.com>
Reviewed-by: Ashok Raj <ashok.raj@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20200622231345.29722-4-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xprtrdma: Prevent dereferencing r_xprt->rx_ep after it is freed

[ Upstream commit 2acc5cae292355f5f18ad377a2a966e7f03c8fec ]

r_xprt->rx_ep is known to be good while the transport's send lock is
held.  Otherwise additional references on rx_ep must be held when it
is used outside of that lock's critical sections.

For now, bump the rx_ep reference count once whenever there is at
least one outstanding Receive WR. This avoids the memory bandwidth
overhead of taking and releasing the reference count for every
ib_post_recv() and Receive completion.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/kvm/book3s64: Fix kernel crash with nested kvm & DEBUG_VIRTUAL

[ Upstream commit c1ed1754f271f6b7acb1bfdc8cfb62220fbed423 ]

With CONFIG_DEBUG_VIRTUAL=y, __pa() checks for addr value and if it's
less than PAGE_OFFSET it leads to a BUG().

  #define __pa(x)
  ({
   VIRTUAL_BUG_ON((unsigned long)(x) < PAGE_OFFSET);
   (unsigned long)(x) & 0x0fffffffffffffffUL;
  })

  kernel BUG at arch/powerpc/kvm/book3s_64_mmu_radix.c:43!
  cpu 0x70: Vector: 700 (Program Check) at [c0000018a2187360]
      pc: c000000000161b30: __kvmhv_copy_tofrom_guest_radix+0x130/0x1f0
      lr: c000000000161d5c: kvmhv_copy_from_guest_radix+0x3c/0x80
  ...
  kvmhv_copy_from_guest_radix+0x3c/0x80
  kvmhv_load_from_eaddr+0x48/0xc0
  kvmppc_ld+0x98/0x1e0
  kvmppc_load_last_inst+0x50/0x90
  kvmppc_hv_emulate_mmio+0x288/0x2b0
  kvmppc_book3s_radix_page_fault+0xd8/0x2b0
  kvmppc_book3s_hv_page_fault+0x37c/0x1050
  kvmppc_vcpu_run_hv+0xbb8/0x1080
  kvmppc_vcpu_run+0x34/0x50
  kvm_arch_vcpu_ioctl_run+0x2fc/0x410
  kvm_vcpu_ioctl+0x2b4/0x8f0
  ksys_ioctl+0xf4/0x150
  sys_ioctl+0x28/0x80
  system_call_exception+0x104/0x1d0
  system_call_common+0xe8/0x214

kvmhv_copy_tofrom_guest_radix() uses a NULL value for to/from to
indicate direction of copy.

Avoid calling __pa() if the value is NULL to avoid the BUG().

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
[mpe: Massage change log a bit to mention CONFIG_DEBUG_VIRTUAL]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200611120159.680284-1-aneesh.kumar@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

ibmvnic: continue to init in CRQ reset returns H_CLOSED

[ Upstream commit 8b40eb73509f5704a0e8cd25de0163876299f1a7 ]

Continue the reset path when partner adapter is not ready or H_CLOSED is
returned from reset crq. This patch allows the CRQ init to proceed to
establish a valid CRQ for traffic to flow after reset.

Signed-off-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ice: protect ring accesses with WRITE_ONCE

[ Upstream commit b1d95cc2391ffac0c5b27256a4fb0d2cfb021a29 ]

The READ_ONCE macro is used when reading rings prior to accessing the
statistics pointer. The corresponding WRITE_ONCE usage when allocating and
freeing the rings to ensure protected access was not in place. Introduce
this.

Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i40e: protect ring accesses with READ- and WRITE_ONCE

[ Upstream commit d59e267912cd90b0adf33b4659050d831e746317 ]

READ_ONCE should be used when reading rings prior to accessing the
statistics pointer. Introduce this as well as the corresponding WRITE_ONCE
usage when allocating and freeing the rings, to ensure protected access.

Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ixgbe: protect ring accesses with READ- and WRITE_ONCE

[ Upstream commit f140ad9fe2ae16f385f8fe4dc9cf67bb4c51d794 ]

READ_ONCE should be used when reading rings prior to accessing the
statistics pointer. Introduce this as well as the corresponding WRITE_ONCE
usage when allocating and freeing the rings, to ensure protected access.

Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ethernet: mvneta: Add 2500BaseX support for SoCs without comphy

[ Upstream commit 1a642ca7f38992b086101fe204a1ae3c90ed8016 ]

The older SoCs like Armada XP support a 2500BaseX mode in the datasheets
referred to as DR-SGMII (Double rated SGMII) or HS-SGMII (High Speed
SGMII). This is an upclocked 1000BaseX mode, thus
PHY_INTERFACE_MODE_2500BASEX is the appropriate mode define for it.
adding support for it merely means writing the correct magic value into
the MVNETA_SERDES_CFG register.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ethernet: mvneta: Fix Serdes configuration for SoCs without comphy

[ Upstream commit b4748553f53f2971e07d2619f13d461daac0f3bb ]

The MVNETA_SERDES_CFG register is only available on older SoCs like the
Armada XP. On newer SoCs like the Armada 38x the fields are moved to
comphy. This patch moves the writes to this register next to the comphy
initialization, so that depending on the SoC either comphy or
MVNETA_SERDES_CFG is configured.
With this we no longer write to the MVNETA_SERDES_CFG on SoCs where it
doesn't exist.

Suggested-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: spidev: fix a potential use-after-free in spidev_release()

[ Upstream commit 06096cc6c5a84ced929634b0d79376b94c65a4bd ]

If an spi device is unbounded from the driver before the release
process, there will be an NULL pointer reference when it's
referenced in spi_slave_abort().

Fix it by checking it's already freed before reference.

Signed-off-by: Zhenzhong Duan <zhenzhong.duan@gmail.com>
Link: https://lore.kernel.org/r/20200618032125.4650-2-zhenzhong.duan@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: spidev: fix a race between spidev_release and spidev_remove

[ Upstream commit abd42781c3d2155868821f1b947ae45bbc33330d ]

Imagine below scene, spidev is referenced after it's freed.

spidev_release()                spidev_remove()
...
                                spin_lock_irq(&spidev->spi_lock);
                                    spidev->spi = NULL;
                                spin_unlock_irq(&spidev->spi_lock);
mutex_lock(&device_list_lock);
dofree = (spidev->spi == NULL);
if (dofree)
    kfree(spidev);
mutex_unlock(&device_list_lock);
                                mutex_lock(&device_list_lock);
                                list_del(&spidev->device_entry);
                                device_destroy(spidev_class, spidev->devt);
                                clear_bit(MINOR(spidev->devt), minors);
                                if (spidev->users == 0)
                                    kfree(spidev);
                                mutex_unlock(&device_list_lock);

Fix it by resetting spidev->spi in device_list_lock's protection.

Signed-off-by: Zhenzhong Duan <zhenzhong.duan@gmail.com>
Link: https://lore.kernel.org/r/20200618032125.4650-1-zhenzhong.duan@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: hda: Intel: add missing PCI IDs for ICL-H, TGL-H and EKL

[ Upstream commit d50313a5a0d803bcf55121a2b82086633060d05e ]

Mirror PCI ids used for SOF.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200617164909.18225-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: hdac_hda: fix memleak with regmap not freed on remove

[ Upstream commit a94eaccefea1186947c5c5451fcae2245dd7e714 ]

kmemleak throws error reports on module load/unload tests, add
snd_hdac_regmap_exit() in .remove().

While we are at it, also fix the error handling flow in .probe() to
use snd_hdac_regmap_exit() if needed.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@gmail.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200617164144.17859-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: SOF: Intel: add PCI ID for CometLake-S

[ Upstream commit 258fb4f4c34a0db9d3834aba6784d7b322176bb9 ]

Mirror ID added for legacy HDaudio

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200617164755.18104-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm: mcde: Fix display initialization problem

[ Upstream commit b984b6d8b52372b98cce0a6ff6c2787f50665b87 ]

The following bug appeared in the MCDE driver/display
initialization during the recent merge window.

First the place we call drm_fbdev_generic_setup() in the
wrong place: this needs to be called AFTER calling
drm_dev_register() else we get this splat:

 ------------[ cut here ]------------
WARNING: CPU: 0 PID: 1 at ../drivers/gpu/drm/drm_fb_helper.c:2198 drm_fbdev_generic_setup+0x164/0x1a8
mcde a0350000.mcde: Device has not been registered.
Modules linked in:
Hardware name: ST-Ericsson Ux5x0 platform (Device Tree Support)
[<c010e704>] (unwind_backtrace) from [<c010a86c>] (show_stack+0x10/0x14)
[<c010a86c>] (show_stack) from [<c0414f38>] (dump_stack+0x9c/0xb0)
[<c0414f38>] (dump_stack) from [<c0121c8c>] (__warn+0xb8/0xd0)
[<c0121c8c>] (__warn) from [<c0121d18>] (warn_slowpath_fmt+0x74/0xb8)
[<c0121d18>] (warn_slowpath_fmt) from [<c04b154c>] (drm_fbdev_generic_setup+0x164/0x1a8)
[<c04b154c>] (drm_fbdev_generic_setup) from [<c04ed278>] (mcde_drm_bind+0xc4/0x160)
[<c04ed278>] (mcde_drm_bind) from [<c04f06b8>] (try_to_bring_up_master+0x15c/0x1a4)
(...)

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200613223027.4189309-1-linus.walleij@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

staging: wfx: fix coherency of hif_scan() prototype

[ Upstream commit 29de523a6270a308d12d21f4fecf52dac491e226 ]

The function hif_scan() return the timeout for the completion of the
scan request. It is the only function from hif_tx.c that return another
thing than just an error code. This behavior is not coherent with the
rest of file. Worse, if value returned is positive, the caller can't
make say if it is a timeout or the value returned by the hardware.

Uniformize API with other HIF functions, only return the error code and
pass timeout with parameters.

Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200529121256.1045521-1-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gpu: host1x: Detach driver on unregister

[ Upstream commit d9a0a05bf8c76e6dc79230669a8b5d685b168c30 ]

Currently when a host1x device driver is unregistered, it is not
detached from the host1x controller, which means that the device
will stay around and when the driver is registered again, it may
bind to the old, stale device rather than the new one that was
created from scratch upon driver registration. This in turn can
cause various weird crashes within the driver core because it is
confronted with a device that was already deleted.

Fix this by detaching the driver from the host1x controller when
it is unregistered. This ensures that the deleted device also is
no longer present in the device list that drivers will bind to.

Reported-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Tested-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/tegra: hub: Do not enable orphaned window group

[ Upstream commit ef4e417eb3ec7fe657928f10ac1d2154d8a5fb38 ]

Though the unconditional enable/disable code is not a final solution,
we don't want to run into a NULL pointer situation when window group
doesn't link to its DC parent if the DC is disabled in Device Tree.

So this patch simply adds a check to make sure that window group has
a valid parent before running into tegra_windowgroup_enable/disable.

Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gpu: host1x: Clean up debugfs in error handling path

[ Upstream commit 109be8b23fb2ec8e2d309325ee3b7a49eab63961 ]

host1x_debug_init() must be reverted in an error handling path.

This is already fixed in the remove function since commit 44156eee91ba
("gpu: host1x: Clean up debugfs on removal")

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/ttm: Fix dma_fence refcnt leak when adding move fence

[ Upstream commit 11425c4519e2c974a100fc984867046d905b9380 ]

ttm_bo_add_move_fence() invokes dma_fence_get(), which returns a
reference of the specified dma_fence object to "fence" with increased
refcnt.

When ttm_bo_add_move_fence() returns, local variable "fence" becomes
invalid, so the refcount should be decreased to keep refcount balanced.

The reference counting issue happens in one exception handling path of
ttm_bo_add_move_fence(). When no_wait_gpu flag is equals to true, the
function forgets to decrease the refcnt increased by dma_fence_get(),
causing a refcnt leak.

Fix this issue by calling dma_fence_put() when no_wait_gpu flag is
equals to true.

Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/370221/
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/ttm: Fix dma_fence refcnt leak in ttm_bo_vm_fault_reserved

[ Upstream commit 37cc4b95d13f311c04aa8e9daacca3905ad45ca7 ]

ttm_bo_vm_fault_reserved() invokes dma_fence_get(), which returns a
reference of the specified dma_fence object to "moving" with increased
refcnt.

When ttm_bo_vm_fault_reserved() returns, local variable "moving" becomes
invalid, so the refcount should be decreased to keep refcount balanced.

The reference counting issue happens in several exception handling paths
of ttm_bo_vm_fault_reserved(). When those error scenarios occur such as
"err" equals to -EBUSY, the function forgets to decrease the refcnt
increased by dma_fence_get(), causing a refcnt leak.

Fix this issue by calling dma_fence_put() when no_wait_gpu flag is
equals to true.

Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/370219/
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: omap4-droid4: Fix spi configuration and increase rate

[ Upstream commit 0df12a01f4857495816b05f048c4c31439446e35 ]

We can currently sometimes get "RXS timed out" errors and "EOT timed out"
errors with spi transfers.

These errors can be made easy to reproduce by reading the cpcap iio
values in a loop while keeping the CPUs busy by also reading /dev/urandom.

The "RXS timed out" errors we can fix by adding spi-cpol and spi-cpha
in addition to the spi-cs-high property we already have.

The "EOT timed out" errors we can fix by increasing the spi clock rate
to 9.6 MHz. Looks similar MC13783 PMIC says it works at spi clock rates
up to 20 MHz, so let's assume we can pick any rate up to 20 MHz also
for cpcap.

Cc: maemo-leste@lists.dyne.org
Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf/x86/rapl: Fix RAPL config variable bug

[ Upstream commit 16accae3d97f97d7f61c4ee5d0002bccdef59088 ]

This patch fixes a bug introduced by:

  fd3ae1e1587d6 ("perf/x86/rapl: Move RAPL support to common x86 code")

The Kconfig variable name was wrong. It was missing the CONFIG_ prefix.

Signed-off-by: Stephane Eranian <eraniangoogle.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Kim Phillips <kim.phillips@amd.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20200528201614.250182-1-eranian@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf/x86/rapl: Move RAPL support to common x86 code

[ Upstream commit fd3ae1e1587d64ef8cc8e361903d33625458073e ]

To prepare for support of both Intel and AMD RAPL.

As per the AMD PPR, Fam17h support Package RAPL counters to monitor power usage.
The RAPL counter operates as with Intel RAPL, and as such it is beneficial
to share the code.

No change in functionality.

Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200527224659.206129-2-eranian@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

regmap: fix alignment issue

[ Upstream commit 53d860952c8215cf9ae1ea33409c8cb71ad6ad3d ]

The assembly and disassembly of data to be sent to or received from
a device invoke functions regmap_format_XX() and regmap_parse_XX()
that extract or insert data items from or into a buffer, using
assignments. In some cases the functions are called with a buffer
pointer with an odd address. On architectures with strict alignment
requirements this can result in a kernel crash. The assignments
have been replaced by functions that take alignment into account.

Signed-off-by: Jens Thoms Toerring <jt@toerring.de>
Link: https://lore.kernel.org/r/20200531095300.GA27570@toerring.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: spi-fsl-dspi: Fix lockup if device is removed during SPI transfer

[ Upstream commit 7684580d45bd3d84ed9b453a4cadf7a9a5605a3f ]

During device removal, the driver should unregister the SPI controller
and stop the hardware.  Otherwise the dspi_transfer_one_message() could
wait on completion infinitely.

Additionally, calling spi_unregister_controller() first in device
removal reverse-matches the probe function, where SPI controller is
registered at the end.

Fixes: 05209f457069 ("spi: fsl-dspi: add missing clk_disable_unprepare() in dspi_remove()")
Reported-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200622110543.5035-1-krzk@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: spi-fsl-dspi: Adding shutdown hook

[ Upstream commit dc234825997ec6ff05980ca9e2204f4ac3f8d695 ]

We need to ensure dspi controller could be stopped in order for kexec
to start the next kernel.
So add the shutdown operation support.

Signed-off-by: Peng Ma <peng.ma@nxp.com>
Link: https://lore.kernel.org/r/20200424061216.27445-1-peng.ma@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: s390: reduce number of IO pins to 1

[ Upstream commit 774911290c589e98e3638e73b24b0a4d4530e97c ]

The current number of KVM_IRQCHIP_NUM_PINS results in an order 3
allocation (32kb) for each guest start/restart. This can result in OOM
killer activity even with free swap when the memory is fragmented
enough:

kernel: qemu-system-s39 invoked oom-killer: gfp_mask=0x440dc0(GFP_KERNEL_ACCOUNT|__GFP_COMP|__GFP_ZERO), order=3, oom_score_adj=0
kernel: CPU: 1 PID: 357274 Comm: qemu-system-s39 Kdump: loaded Not tainted 5.4.0-29-generic #33-Ubuntu
kernel: Hardware name: IBM 8562 T02 Z06 (LPAR)
kernel: Call Trace:
kernel: ([<00000001f848fe2a>] show_stack+0x7a/0xc0)
kernel:  [<00000001f8d3437a>] dump_stack+0x8a/0xc0
kernel:  [<00000001f8687032>] dump_header+0x62/0x258
kernel:  [<00000001f8686122>] oom_kill_process+0x172/0x180
kernel:  [<00000001f8686abe>] out_of_memory+0xee/0x580
kernel:  [<00000001f86e66b8>] __alloc_pages_slowpath+0xd18/0xe90
kernel:  [<00000001f86e6ad4>] __alloc_pages_nodemask+0x2a4/0x320
kernel:  [<00000001f86b1ab4>] kmalloc_order+0x34/0xb0
kernel:  [<00000001f86b1b62>] kmalloc_order_trace+0x32/0xe0
kernel:  [<00000001f84bb806>] kvm_set_irq_routing+0xa6/0x2e0
kernel:  [<00000001f84c99a4>] kvm_arch_vm_ioctl+0x544/0x9e0
kernel:  [<00000001f84b8936>] kvm_vm_ioctl+0x396/0x760
kernel:  [<00000001f875df66>] do_vfs_ioctl+0x376/0x690
kernel:  [<00000001f875e304>] ksys_ioctl+0x84/0xb0
kernel:  [<00000001f875e39a>] __s390x_sys_ioctl+0x2a/0x40
kernel:  [<00000001f8d55424>] system_call+0xd8/0x2c8

As far as I can tell s390x does not use the iopins as we bail our for
anything other than KVM_IRQ_ROUTING_S390_ADAPTER and the chip/pin is
only used for KVM_IRQ_ROUTING_IRQCHIP. So let us use a small number to
reduce the memory footprint.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200617083620.5409-1-borntraeger@de.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

Linux 5.7.8

efi: Make it possible to disable efivar_ssdt entirely

commit 435d1a471598752446a72ad1201b3c980526d869 upstream.

In most cases, such as CONFIG_ACPI_CUSTOM_DSDT and
CONFIG_ACPI_TABLE_UPGRADE, boot-time modifications to firmware tables
are tied to specific Kconfig options.  Currently this is not the case
for modifying the ACPI SSDT via the efivar_ssdt kernel command line
option and associated EFI variable.

This patch adds CONFIG_EFI_CUSTOM_SSDT_OVERLAYS, which defaults
disabled, in order to allow enabling or disabling that feature during
the build.

Cc: <stable@vger.kernel.org>
Signed-off-by: Peter Jones <pjones@redhat.com>
Link: https://lore.kernel.org/r/20200615202408.2242614-1-pjones@redhat.com
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm zoned: assign max_io_len correctly

commit 7b2377486767503d47265e4d487a63c651f6b55d upstream.

The unit of max_io_len is sector instead of byte (spotted through
code review), so fix it.

Fixes: 3b1a94c88b79 ("dm zoned: drive-managed zoned block device target")
Cc: stable@vger.kernel.org
Signed-off-by: Hou Tao <houtao1@huawei.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/cma.c: use exact_nid true to fix possible per-numa cma leak

commit 40366bd70bbbbf822ca224dfc227a8c8e868c44f upstream.

Calling cma_declare_contiguous_nid() with false exact_nid for per-numa
reservation can easily cause cma leak and various confusion.  For example,
mm/hugetlb.c is trying to reserve per-numa cma for gigantic pages.  But it
can easily leak cma and make users confused when system has memoryless
nodes.

In case the system has 4 numa nodes, and only numa node0 has memory.  if
we set hugetlb_cma=4G in bootargs, mm/hugetlb.c will get 4 cma areas for 4
different numa nodes.  since exact_nid=false in current code, all 4 numa
nodes will get cma successfully from node0, but hugetlb_cma[1 to 3] will
never be available to hugepage will only allocate memory from
hugetlb_cma[0].

In case the system has 4 numa nodes, both numa node0&2 has memory, other
nodes have no memory.  if we set hugetlb_cma=4G in bootargs, mm/hugetlb.c
will get 4 cma areas for 4 different numa nodes.  since exact_nid=false in
current code, all 4 numa nodes will get cma successfully from node0 or 2,
but hugetlb_cma[1] and [3] will never be available to hugepage as
mm/hugetlb.c will only allocate memory from hugetlb_cma[0] and
hugetlb_cma[2].  This causes permanent leak of the cma areas which are
supposed to be used by memoryless node.

Of cource we can workaround the issue by letting mm/hugetlb.c scan all cma
areas in alloc_gigantic_page() even node_mask includes node0 only.  that
means when node_mask includes node0 only, we can get page from
hugetlb_cma[1] to hugetlb_cma[3].  But this will cause kernel crash in
free_gigantic_page() while it wants to free page by:
cma_release(hugetlb_cma[page_to_nid(page)], page, 1 << order)

On the other hand, exact_nid=false won't consider numa distance, it might
be not that useful to leverage cma areas on remote nodes.  I feel it is
much simpler to make exact_nid true to make everything clear.  After that,
memoryless nodes won't be able to reserve per-numa CMA from other nodes
which have memory.

Fixes: cf11e85fc08c ("mm: hugetlb: optionally allocate gigantic hugepages using cma")
Signed-off-by: Barry Song <song.bao.hua@hisilicon.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Roman Gushchin <guro@fb.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Aslan Bakirov <aslan@fb.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Andreas Schaufler <andreas.schaufler@gmx.de>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200628074345.27228-1-song.bao.hua@hisilicon.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/hugetlb.c: fix pages per hugetlb calculation

commit 1139d336fff425f9a20374945cdd28eb44d09fa8 upstream.

The routine hpage_nr_pages() was incorrectly used to calculate the number
of base pages in a hugetlb page.  hpage_nr_pages is designed to be called
for THP pages and will return HPAGE_PMD_NR for hugetlb pages of any size.

Due to the context in which hpage_nr_pages was called, it is unlikely to
produce a user visible error.  The routine with the incorrect call is only
exercised in the case of hugetlb memory error or migration.  In addition,
this would need to be on an architecture which supports huge page sizes
less than PMD_SIZE.  And, the vma containing the huge page would also need
to smaller than PMD_SIZE.

Fixes: c0d0381ade79 ("hugetlbfs: use i_mmap_rwsem for more pmd sharing synchronization")
Reported-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200629185003.97202-1-mike.kravetz@oracle.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>