arm64: dts: qcom: msm8916: Make blsp_dma controlled-remotely

The blsp_dma controller is shared between the different subsystems,
which is why it is already initialized by the firmware. We should not
reinitialize it from Linux to avoid potential other users of the DMA
engine to misbehave.

In mainline this can be described using the "qcom,controlled-remotely"
property. In the downstream/vendor kernel from Qualcomm there is an
opposite "qcom,managed-locally" property. This property is *not* set
for the qcom,sps-dma@7884000 [1] so adding "qcom,controlled-remotely"
upstream matches the behavior of the downstream/vendor kernel.

Adding this seems to fix some weird issues with UART where both
input/output becomes garbled with certain obscure firmware versions on
some devices.

[1]: https://git.codelinaro.org/clo/la/kernel/msm-3.10/-/blob/LA.BR.1.2.9.1-02310-8x16.0/arch/arm/boot/dts/qcom/msm8916.dtsi#L1466-1472

Cc: stable@vger.kernel.org # 6.5
Fixes: a0e5fb103150 ("arm64: dts: qcom: Add msm8916 BLSP device nodes")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20231204-msm8916-blsp-dma-remote-v1-1-3e49c8838c8d@gerhold.net
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: msm8939: Add clock-frequency for broadcast timer

Looks like not all firmware versions used for MSM8939 program the timer
frequency for both broadcast/MMIO timers, causing a WARNING at runtime:

WARNING: CPU: 0 PID: 0 at kernel/time/clockevents.c:38 cev_delta2ns+0x74/0x90
pc : cev_delta2ns+0x74/0x90
lr : clockevents_config.part.0+0x64/0x8c
Call trace:
 cev_delta2ns+0x74/0x90
 clockevents_config_and_register+0x20/0x34
 arch_timer_mem_of_init+0x374/0x534
 timer_probe+0x88/0x110
 time_init+0x14/0x4c
 start_kernel+0x2c0/0x640

Unfortunately there is no way to fix the firmware on most of these
devices since it's proprietary and signed. As a workaround, specify the
clock-frequency explicitly in the DT to fix the warning.

Fixes: 61550c6c156c ("arm64: dts: qcom: Add msm8939 SoC")
Reported-by: Vincent Knecht <vincent.knecht@mailoo.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231204-msm8939-timer-v1-1-a2486c625786@gerhold.net
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: Add missing vio-supply for AW2013

Add the missing vio-supply to all usages of the AW2013 LED controller
to ensure that the regulator needed for pull-up of the interrupt and
I2C lines is really turned on. While this seems to have worked fine so
far some of these regulators are not guaranteed to be always-on. For
example, pm8916_l6 is typically turned off together with the display
if there aren't any other devices (e.g. sensors) keeping it always-on.

Cc: stable@vger.kernel.org # 6.6
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20231204-qcom-aw2013-vio-v1-1-5d264bb5c0b2@gerhold.net
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: ipq6018: Add QUP5 SPI node

Add node to support the QUP5 SPI controller inside of IPQ6018.
Some routers use this bus to connect SPI TPM chips.

Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Link: https://lore.kernel.org/r/20231203154003.532765-1-amadeus@jmu.edu.cn
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: ipq6018: Add remaining QUP UART node

Add node to support all the QUP UART node controller inside of IPQ6018.
Some routers use these bus to connect Bluetooth chips.

Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Link: https://lore.kernel.org/r/20231203153914.532654-1-amadeus@jmu.edu.cn
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: qrb4210-rb2: Enable MPSS and Wi-Fi

Enable the remote processors and tighten up the regulators to enable
Wi-Fi functionality on the RB2.

For reference, the hw/sw identifies as:

qmi chip_id 0x150 chip_family 0x4002 board_id 0xff soc_id 0x40670000
qmi fw_version 0x337302d3 fw_build_timestamp 2023-01-06 01:50
fw_build_id QC_IMAGE_VERSION_STRING=WLAN.HL.3.3.7.c2-00723-QCAHLSWMTPLZ-1
wcn3990 hw1.0 target 0x00000008 chip_id 0x00000000 sub 0000:0000
kconfig debug 0 debugfs 0 tracing 0 dfs 0 testmode 0
firmware ver  api 5 features wowlan,mgmt-tx-by-reference,non-bmi
crc32 b3d4b790
htt-ver 3.114 wmi-op 4 htt-op 3 cal file max-sta 32 raw 0 hwcrypto 1

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231104-topic-rb2_wifi-v1-1-fd45ae535d2f@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: qcm6490-fairphone-fp5: Enable WiFi

Now that the WPSS remoteproc is enabled, enable wifi so we can use it.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20231208-sc7280-remoteprocs-v3-11-6aa394d33edf@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: qcm6490-fairphone-fp5: Enable various remoteprocs

Enable the ADSP, CDSP, MPSS and WPSS that are found on the SoC.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20231208-sc7280-remoteprocs-v3-10-6aa394d33edf@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sc7280: Add CDSP node

Add the node for the ADSP found on the SC7280 SoC, using standard
Qualcomm firmware.

Remove the reserved-memory node from sc7280-chrome-common since CDSP is
currently not used there.

Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20231208-sc7280-remoteprocs-v3-9-6aa394d33edf@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sc7280: Add ADSP node

Add the node for the ADSP found on the SC7280 SoC, using standard
Qualcomm firmware.

Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20231208-sc7280-remoteprocs-v3-8-6aa394d33edf@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sc7280: Use WPSS PAS instead of PIL

The wpss-pil driver wants to manage too many resources that cannot be
touched with standard Qualcomm firmware.

Use the compatible from the PAS driver and move the ChromeOS-specific
bits to sc7280-chrome-common.dtsi.

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20231208-sc7280-remoteprocs-v3-7-6aa394d33edf@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: qcm6490-fairphone-fp5: Enable UFS

Enable the UFS phy and controller so that we can access the internal
storage of the phone.

At the same time we need to bump the minimum voltage used for UFS VCC,
otherwise it doesn't initialize properly. The 2.952V is taken from the
vcc-voltage-level property downstream.

See also the following link for more information about the VCCQ/VCCQ2:
https://gerrit-public.fairphone.software/plugins/gitiles/kernel/msm-extra/devicetree/+/1590a3739e7dc29d2597307881553236d492f188/fp5/yupik-idp-pm7250b.dtsi#207

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231002-fp5-ufs-v2-1-e2d7de522134@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: msm8953: Set initial address for memory

The dtbs_check really doesn't like having memory without reg set.

The base address depends on the amount of RAM you have:

  <= 2.00 GiB RAM: 0x80000000
   = 3.00 GiB RAM: 0x40000000
   = 3.75 GiB RAM: 0x10000000
 (more does not fit into the 32-bit physical address space)

So, let's pick one of the values, 0x10000000 which is used on devices
with 3.75 GiB RAM. Since the bootloader will update it to what's present
on the device it doesn't matter too much.

Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Link: https://lore.kernel.org/r/20231125-msm8953-misc-fixes-v2-1-df86655841d9@z3ntu.xyz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sc7280: Add UFS nodes for sc7280 IDP board

Add UFS host controller and PHY nodes for sc7280 IDP board.

Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20231205-sc7280-ufs-v6-3-ad6ca7796de7@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sc7280: Add UFS nodes for sc7280 soc

Add UFS host controller and PHY nodes for sc7280 soc.

Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Konrad Dybcio <konrad.dybcio@linaro.org>
[luca: various cleanups and additions as written in the cover letter]
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20231205-sc7280-ufs-v6-2-ad6ca7796de7@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8650: Add DisplayPort device nodes

Declare the displayport controller present on the Qualcomm SM8650 SoC
and connected to the USB3/DP Combo PHY.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231208-topic-sm8650-upstream-dp-v2-1-69dab3d074e4@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: pm8550: drop PWM address/size cells

The address/size cells in PWM node are needed only if individual LEDs
are listed.  If multi-led is used, then this leads to dtc W=1 warnings:

  pm8550.dtsi:65.19-73.5: Warning (avoid_unnecessary_addr_size): /soc@0/spmi@c400000/pmic@1/pwm:
    unnecessary #address-cells/#size-cells without "ranges" or child "reg" property

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231208124332.48636-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: x1e80100: Add Compute Reference Device

Add basic support for X1E80100 CRD board dts, which allows it to boot
to a shell.

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Co-developed-by: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231205062403.14848-5-quic_sibis@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: Add base X1E80100 dtsi and the QCP dts

Add base dtsi and QCP board (Qualcomm Compute Platform) dts file for
X1E80100 SoC, describing the CPUs, GCC and RPMHCC clock controllers,
geni UART, interrupt controller, TLMM, reserved memory, interconnects,
SMMU and LLCC nodes.

Co-developed-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Co-developed-by: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231205062403.14848-4-quic_sibis@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

dt-bindings: arm: qcom: Document X1E80100 SoC and boards

Document the X1E80100 SoC binding and also the boards using it.
Also document the new board id qcp (Qualcomm Compute Platform).

Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Co-developed-by: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231205062403.14848-3-quic_sibis@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

dt-bindings: arm: cpus: Add qcom,oryon compatible

Oryon is the custom ARM CPU core implementation used in Qualcomm's
X1E80100 SoC, document it.

Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Co-developed-by: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Link: https://lore.kernel.org/r/20231205062403.14848-2-quic_sibis@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

Merge branch 'icc-x1e80100' of https://git./linux/kernel/git/djakov/icc into arm64-for-6.8

Merge the X1E80100 interconnect binding to get access to the
interconnect port constants.

Merge branch '20231205061002.30759-4-quic_sibis@quicinc.com' into arm64-for-6.8

Merge the X1E80100 clock bindings to get access to the clock constants.

dt-bindings: clock: qcom-rpmhcc: Add RPMHCC bindings for X1E80100

Add bindings and update documentation for clock rpmh driver on X1E80100
SoCs.

Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Co-developed-by: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231205061002.30759-4-quic_sibis@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

dt-bindings: clock: qcom: Add X1E80100 GCC clocks

Add device tree bindings for global clock controller on X1E80100 SoCs.

Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Co-developed-by: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231205061002.30759-2-quic_sibis@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8650-mtp: add WSA8845 speakers

Add nodes for WSA8845 speakers on SM8650 MTP board.

Cc: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231204155746.302323-5-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8650: add Soundwire controllers

Add nodes for LPASS Soundwire v2.0.0 controllers.  Use labels with
indices matching downstream DTS, to make any comparisons easier.

Cc: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231204155746.302323-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8650: add ADSP audio codec macros

Add the Low Power Audio SubSystem (LPASS) / ADSP audio codec macros on
Qualcomm SM8650.  The nodes are very similar to SM8550.

Cc: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231204155746.302323-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8650: add LPASS LPI pin controller

Add the Low Power Audio SubSystem Low Power Island (LPASS LPI) pin
controller device node as part of audio subsystem in Qualcomm SM8650
SoC.

Cc: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231204155746.302323-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8650: add ADSP GPR

Add the ADSP Generic Packet Router (GPR) device node as part of audio
subsystem in Qualcomm SM8650 SoC.

Cc: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231204155746.302323-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8650-qrd: enable IPA

Enable IPA on the SM8650 QRD.  The GSI firmware on this platform is
loaded by the AP.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231201-topic-sm8650-upstream-ipa-v1-2-7e8cf7200cd2@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8650: add IPA information

Add IPA-related nodes and definitions to SM8650 dtsi,
which uses IPA v5.5.1 a minor revision of v5.5 found
in the SM8550 SoC.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231201-topic-sm8650-upstream-ipa-v1-1-7e8cf7200cd2@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8650-qrd: add interconnect dependent device nodes

Now interconnect dependent devices are added in sm8650 DTSI,
now enable more devices for the Qualcomm SM8650 QRD board:
- PCIe
- Display
- DSPs
- SDCard
- UFS
- USB role switch with PMIC Glink
- Bluetooth

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231130-topic-sm8650-upstream-dt-v5-8-b25fb781da52@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8650-mtp: add interconnect dependent device nodes

Now interconnect dependent devices are added in sm8650 DTSI,
now enable more devices for the Qualcomm SM8650 MTP board:
- PCIe
- Display
- DSPs
- SDCard
- UFS
- USB role switch with PMIC Glink

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231130-topic-sm8650-upstream-dt-v5-7-b25fb781da52@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8650: add interconnect dependent device nodes

Add Hardware nodes that depends on an interconnect property to
be valid.

The includes:
- all QUP i2s/spi nodes
- PCIe
- UFS
- SDHCI
- Display
- HWMON

Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231130-topic-sm8650-upstream-dt-v5-6-b25fb781da52@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8650: add initial SM8650 QRD dts

Add initial QRD (Qualcomm Reference Device) DT, it supports
boot to shell with buttons, leds and USB peripheral.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231130-topic-sm8650-upstream-dt-v5-5-b25fb781da52@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8650: add initial SM8650 MTP dts

Add initial QRD (Qualcomm Reference Device) DT,
only boots to shell with USB device support.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231130-topic-sm8650-upstream-dt-v5-4-b25fb781da52@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: pm8550ve: make PMK8550VE SID configurable

The pm8550ve can be found with a different SID on SM8650 platforms,
make it configurable.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231130-topic-sm8650-upstream-dt-v5-3-b25fb781da52@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: add initial SM8650 dtsi

Add initial DTSI for the Qualcomm SM8650 platform,
only contains nodes which doesn't depend on interconnect.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231130-topic-sm8650-upstream-dt-v5-2-b25fb781da52@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

dt-bindings: arm: qcom: document SM8650 and the reference boards

Document the SM8650 SoC and based MTP (Mobile Test Platforms) and QRD
(Qualcomm Reference Device) boards.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231130-topic-sm8650-upstream-dt-v5-1-b25fb781da52@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

Merge branch 'icc-sm8650' of https://git./linux/kernel/git/djakov/icc into arm64-for-6.8

Merge the SM8650 interconnect binding, to gain access to the
interconnect port constants.

Merge branch '20231106-topic-sm8650-upstream-clocks-v3-5-761a6fadb4c0@linaro.org' into arm64-for-6.8

Merge the SM8650 clock bindings, to gain access to the clock constants.

arm64: dts: qcom: sm8250-xiaomi-pipa: Add initial device tree

Initial support for Xiaomi Pad 6 tablet, that have sm8250 soc.

Signed-off-by: Luka Panio <lukapanio@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231125220315.118922-2-lukapanio@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

dt-bindings: arm: qcom: Add Xiaomi Pad 6 (xiaomi-pipa)

Add a compatible for Xiaomi Pad 6.

Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Luka Panio <lukapanio@gmail.com>
Link: https://lore.kernel.org/r/20231125220315.118922-1-lukapanio@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8550-qrd: enable IPA

Enable IPA on the SM8550 QRD.  The GSI firmware on this platform is
loaded by the AP.

Signed-off-by: Alex Elder <elder@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Link: https://lore.kernel.org/r/20231124181718.915208-3-elder@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8550: add IPA information

Add IPA-related nodes and definitions to "sm8550.dtsi", which uses
IPA v5.5.

Signed-off-by: Alex Elder <elder@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Link: https://lore.kernel.org/r/20231124181718.915208-2-elder@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

dt-bindings: arm: qcom-soc: extend pattern matching for X1E80100 SoC

Extend pattern matching to support the X1E platform name.

Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231124100608.29964-2-quic_sibis@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: minor whitespace cleanup around '='

The DTS code coding style expects exactly one space before and after '='
sign.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231124095049.58618-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: ipq8074: Add QUP4 SPI node

Add node to support the QUP4 SPI controller inside of IPQ8074.
Some devices use this bus to communicate to a Bluetooth controller.

Signed-off-by: Robert Marko <robimarko@gmail.com>
Link: https://lore.kernel.org/r/20231123121324.1046164-1-robimarko@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: qdu1000: Add ECPRI clock controller

Add device node for ECPRI clock controller on qcom QDU1000
and QRU1000 SoCs.

Signed-off-by: Imran Shaik <quic_imrashai@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231123064735.2979802-5-quic_imrashai@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8550: fix USB wakeup interrupt types

The DP/DM wakeup interrupts are edge triggered and which edge to trigger
on depends on use-case and whether a Low speed or Full/High speed device
is connected.

Note that only triggering on rising edges can be used to detect resume
events but not disconnect events.

Fixes: 7f7e5c1b037f ("arm64: dts: qcom: sm8550: Add USB PHYs and controller nodes")
Cc: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20231120164331.8116-12-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8150: fix USB wakeup interrupt types

The DP/DM wakeup interrupts are edge triggered and which edge to trigger
on depends on use-case and whether a Low speed or Full/High speed device
is connected.

Fixes: 0c9dde0d2015 ("arm64: dts: qcom: sm8150: Add secondary USB and PHY nodes")
Fixes: b33d2868e8d3 ("arm64: dts: qcom: sm8150: Add USB and PHY device nodes")
Cc: stable@vger.kernel.org # 5.10
Cc: Jonathan Marek <jonathan@marek.ca>
Cc: Jack Pham <quic_jackp@quicinc.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Jack Pham <quic_jackp@quicinc.com>
Link: https://lore.kernel.org/r/20231120164331.8116-11-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm6375: fix USB wakeup interrupt types

The DP/DM wakeup interrupts are edge triggered and which edge to trigger
on depends on use-case and whether a Low speed or Full/High speed device
is connected.

Fixes: 59d34ca97f91 ("arm64: dts: qcom: Add initial device tree for SM6375")
Cc: stable@vger.kernel.org # 6.2
Cc: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231120164331.8116-10-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sdm845: fix USB wakeup interrupt types

The DP/DM wakeup interrupts are edge triggered and which edge to trigger
on depends on use-case and whether a Low speed or Full/High speed device
is connected.

Fixes: ca4db2b538a1 ("arm64: dts: qcom: sdm845: Add USB-related nodes")
Cc: stable@vger.kernel.org # 4.20
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231120164331.8116-9-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sdm670: fix USB wakeup interrupt types

The DP/DM wakeup interrupts are edge triggered and which edge to trigger
on depends on use-case and whether a Low speed or Full/High speed device
is connected.

Fixes: 07c8ded6e373 ("arm64: dts: qcom: add sdm670 and pixel 3a device trees")
Cc: stable@vger.kernel.org # 6.2
Cc: Richard Acayan <mailingradian@gmail.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Acked-by: Richard Acayan <mailingradian@gmail.com>
Link: https://lore.kernel.org/r/20231120164331.8116-8-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sc8180x: fix USB wakeup interrupt types

The DP/DM wakeup interrupts are edge triggered and which edge to trigger
on depends on use-case and whether a Low speed or Full/High speed device
is connected.

Fixes: b080f53a8f44 ("arm64: dts: qcom: sc8180x: Add remoteprocs, wifi and usb nodes")
Cc: stable@vger.kernel.org # 6.5
Cc: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231120164331.8116-7-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sc7280: fix usb_2 wakeup interrupt types

The DP/DM wakeup interrupts are edge triggered and which edge to trigger
on depends on use-case and whether a Low speed or Full/High speed device
is connected.

Note that only triggering on rising edges can be used to detect resume
events but not disconnect events.

Fixes: bb9efa59c665 ("arm64: dts: qcom: sc7280: Add USB related nodes")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231120164331.8116-6-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sc7280: fix usb_1 wakeup interrupt types

A recent cleanup reordering the usb_1 wakeup interrupts inadvertently
switched the DP and SuperSpeed interrupt trigger types.

Fixes: 4a7ffc10d195 ("arm64: dts: qcom: align DWC3 USB interrupts with DT schema")
Cc: stable@vger.kernel.org # 5.19
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231120164331.8116-5-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sc7180: fix USB wakeup interrupt types

The DP/DM wakeup interrupts are edge triggered and which edge to trigger
on depends on use-case and whether a Low speed or Full/High speed device
is connected.

Fixes: 0b766e7fe5a2 ("arm64: dts: qcom: sc7180: Add USB related nodes")
Cc: stable@vger.kernel.org # 5.10
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231120164331.8116-4-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sa8775p: fix USB wakeup interrupt types

The DP/DM wakeup interrupts are edge triggered and which edge to trigger
on depends on use-case and whether a Low speed or Full/High speed device
is connected.

Note that only triggering on rising edges can be used to detect resume
events but not disconnect events.

Fixes: de1001525c1a ("arm64: dts: qcom: sa8775p: add USB nodes")
Cc: Shazad Hussain <quic_shazhuss@quicinc.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20231120164331.8116-3-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: msm8916-longcheer-l8150: Add battery and charger

Longcheer L8150 doesn't have any dedicated fuel-gauge or charger,
instead making use of the pmic hardware blocks for those purposes.

Add pm8916 bms and charger, as well as the battery cell description
that those blocks rely on.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Link: https://lore.kernel.org/r/20231120-pm8916-dtsi-bms-lbc-v4-3-4f91056c8252@trvn.ru
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: pm8916: Add BMS and charger

pm8916 contains some hardware blocks for battery powered devices:

- VM-BMS: Battery voltage monitoring block.
- LBC: Linear battery charger.

Add them to the pmic dtsi so the devices that make use of those blocks
can enable them.

Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231120-pm8916-dtsi-bms-lbc-v4-2-4f91056c8252@trvn.ru
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sc7280: Add 0xac Adreno speed bin

A643 (A635 speedbin 0xac) tops out at 812 MHz. Fill in the
opp-supported-hw appropriately.

Note that fuseval 0xac is referred to as speedbin 1 downstream, but
that was already in use upstream, so 2 was chosen instead.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230926-topic-a643-v2-4-06fa3d899c0a@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sc7280: Mark Adreno SMMU as DMA coherent

The SMMUs on sc7280 are cache-coherent. APPS_SMMU is marked as such,
mark the GPU one as well.

Fixes: 96c471970b7b ("arm64: dts: qcom: sc7280: Add gpu support")
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230926-topic-a643-v2-3-06fa3d899c0a@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sc7280: Fix up GPU SIDs

GPU_SMMU SID 1 is meant for Adreno LPAC (Low Priority Async Compute).
On platforms that support it (in firmware), it is necessary to
describe that link, or Adreno register access will hang the board.

The current settings are functionally identical, *but* due to what is
likely hardcoded security policies, the secure firmware rejects them,
resulting in the board hanging. To avoid that, alter the settings such
that SID 0 and 1 are described separately.

Fixes: 96c471970b7b ("arm64: dts: qcom: sc7280: Add gpu support")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230926-topic-a643-v2-2-06fa3d899c0a@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sc7280: Add ZAP shader support

Non-Chrome SC7280-family platforms ship a ZAP shader with the Adreno GPU.
Describe that and make sure it doesn't interfere with Chrome devices.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230926-topic-a643-v2-1-06fa3d899c0a@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

dt-bindings: arm: qcom-soc: extend pattern for matching existing SoCs

Add missing QDU, QRU and SDA platform names to the pattern matching all
Qualcomm compatibles.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20231120100617.47156-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sdx75-idp: Enable USB3 and PHY support

Enable the support for USB3 controller, QMP PHY and HS PHY
on SDX75 IDP.

Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20231117080737.606687-4-quic_rohiagar@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: Add USB3 and PHY support on SDX75

Add devicetree nodes for enabling USB3 controller, Qcom QMP PHY and
HS PHY on SDX75.

Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20231117080737.606687-3-quic_rohiagar@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: Add interconnect nodes for SDX75

Add interconnect nodes to support interconnects on SDX75.
Also parallely add the interconnect property for UART required
so that the bootup to shell does not break with interconnects
in place.

Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20231117080737.606687-2-quic_rohiagar@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8350: Fix remoteproc interrupt type

In a similar vein to
https://lore.kernel.org/lkml/20220530080842.37024-3-manivannan.sadhasivam@linaro.org/,
the remote processors on sm8350 fail to initialize with the 'correct'
(i.e., specified in downstream) IRQ type. Change this to EDGE_RISING.

Signed-off-by: Nia Espera <nespera@igalia.com>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231111-nia-sm8350-for-upstream-v4-4-3a638b02eea5@igalia.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: pm8350k: Remove hanging whitespace

pmk8350 has a random tab character inserted, so remove it.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Nia Espera <nespera@igalia.com>
Link: https://lore.kernel.org/r/20231111-nia-sm8350-for-upstream-v4-3-3a638b02eea5@igalia.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8350: Fix DMA0 address

DMA0 node downstream is specified at 0x900000, so fix the typo. Without
this, enabling any i2c node using DMA0 causes a hang.

Fixes: bc08fbf49bc8 ("arm64: dts: qcom: sm8350: Define GPI DMA engines")
Fixes: 41d6bca799b3 ("arm64: dts: qcom: sm8350: correct DMA controller unit address")
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Nia Espera <nespera@igalia.com>
Link: https://lore.kernel.org/r/20231111-nia-sm8350-for-upstream-v4-2-3a638b02eea5@igalia.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

dt-bindings: iio: adc: qcom: Add Qualcomm smb139x

Bindings for a charger controller chip found on sm8350

Signed-off-by: Nia Espera <nespera@igalia.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20231111-nia-sm8350-for-upstream-v4-1-3a638b02eea5@igalia.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sc8180x: align APSS with bindings

SC8180x APSS Devicetree bindings expect qcom,sc8180x-apss-shared to use
qcom,sdm845-apss-shared fallback:

  sc8180x-lenovo-flex-5g.dtb: mailbox@17c00000: compatible: 'oneOf' conditional failed, one must be fixed:
    ['qcom,sc8180x-apss-shared'] is too short

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231111204725.35707-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm6375-pdx225: add fixed touchscreen AVDD regulator

The Samsung S6SY761 touchscreen bindings expect AVDD regulator which is
missing in the Sony Xperia PDX225 DTS.  There is however pinctrl setting
for in the touchscreen device node with similar name: "avdd", so assume
author wanted to control a fixed regulator with a GPIO.

This fixes dtbs_check warning:

  sm6375-sony-xperia-murray-pdx225.dtb: touchscreen@48: 'avdd-supply' is a required property

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231111164229.63803-6-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm6125: add interrupts to DWC3 USB controller

Add interrupts to SM6125 DWC3 USB controller, based on downstream/vendor
code of Trinket DTSI from Xiaomi Laurel device, to fix dtbs_check
warnings:

  sm6125-xiaomi-laurel-sprout.dtb: usb@4ef8800: 'interrupt-names' is a required property
  sm6125-xiaomi-laurel-sprout.dtb: usb@4ef8800: 'oneOf' conditional failed, one must be fixed:
    'interrupts' is a required property
    'interrupts-extended' is a required property

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Fixes: cff4bbaf2a2d ("arm64: dts: qcom: Add support for SM6125")
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Link: https://lore.kernel.org/r/20231111164229.63803-5-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm6115: align mem timer size cells with bindings

Commit 70d1e09ebf19 ("arm64: dts: qcom: sm6115: Use 64 bit addressing")
converted all addresses to 64-bit addressing, but the ARMv7 memory
mapped architected timer bindings expect sizes up to 32-bit.  Keep
64-bit addressing but change size of memory mapping to 32-bit
(size-cells=1) and adjust the ranges to match this.

This fixes dtbs_check warnings like:

  sm6115p-lenovo-j606f.dtb: timer@f120000: #size-cells:0:0: 1 was expected

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231111164229.63803-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8150: use 'gpios' suffix for PCI GPIOs

Linux handles both versions, but bindings expect GPIO properties to
have 'gpios' suffix instead of 'gpio':

  sa8155p-adp.dtb: pci@1c00000: Unevaluated properties are not allowed ('perst-gpio' was unexpected)

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231111164229.63803-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sc8180x-primus: use 'gpios' suffix for PCI GPIOs

Linux handles both versions, but bindings expect GPIO properties to
have 'gpios' suffix instead of 'gpio':

  sc8180x-primus.dtb: pci@1c10000: Unevaluated properties are not allowed ('perst-gpio', 'wake-gpio' were unexpected)

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231111164229.63803-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sc8180x-flex-5g: use 'gpios' suffix for PCI GPIOs

Linux handles both versions, but bindings expect GPIO properties to
have 'gpios' suffix instead of 'gpio':

  sc8180x-lenovo-flex-5g.dtb: pci@1c08000: Unevaluated properties are not allowed ('perst-gpio', 'wake-gpio' were unexpected)

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231111164229.63803-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sdm845: correct Soundwire node name

Soundwire Devicetree bindings expect the Soundwire controller device
node to be named just "soundwire":

  sdm845-db845c.dtb: swm@c85: $nodename:0: 'swm@c85' does not match '^soundwire(@.*)?$'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20231111095617.16496-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sdm845-db845c: correct LED panic indicator

There is no "panic-indicator" default trigger but a property with that
name:

  sdm845-db845c.dtb: leds: led-0: Unevaluated properties are not allowed ('linux,default-trigger' was unexpected)

Fixes: 3f72e2d3e682 ("arm64: dts: qcom: Add Dragonboard 845c")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231111095617.16496-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: qrb5165-rb5: correct LED panic indicator

There is no "panic-indicator" default trigger but a property with that
name:

  qrb5165-rb5.dtb: leds: led-user4: Unevaluated properties are not allowed ('linux,default-trigger' was unexpected)

Fixes: b5cbd84e499a ("arm64: dts: qcom: qrb5165-rb5: Add onboard LED support")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231111094623.12476-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8250: Add wakeup-source to usb_1 and usb_2

To test out a different GDSC change I wanted to have a USB keypress resume
a system in suspend.

Adding wakeup-source to usb_1 and usb_2 "just works" for me on rb5.
Consistent with qcm2290 and sa8775p add wakeup-source to the dtsi for the
SoC.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231109004311.2449566-2-bryan.odonoghue@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sdm850-lenovo-yoga: Add wakeup-sources

The keyboard and touchpad can be used to wake the machine
up from sleep, so mark them as such in the dts file.

Signed-off-by: Steev Klimaszewski <steev@kali.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231107-wakeup-source-v2-1-bf1562ef9367@kali.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sa8775p-ride: enable pmm8654au_0_pon_resin

The volume down key is controlled by PMIC via the PON hardware on
sa8775p platform, so enable the same for sa8775p-ride.

Signed-off-by: Shazad Hussain <quic_shazhuss@quicinc.com>
Link: https://lore.kernel.org/r/20231107120503.28917-1-quic_shazhuss@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8350: move DPU opp-table to its node

The Qualcomm MDSS bindings expect that DPU opp-table is defined within
DPU node:

  sm8350-hdk.dtb: display-subsystem@ae00000: Unevaluated properties are not allowed ('opp-table' was unexpected)

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20231107103540.27353-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sc8280xp-x13s: drop sound-dai-cells from eDisplayPort

Qualcomm MDSS Embedded DisplayPort bindings do not allow
sound-dai-cells:

  sc8280xp-lenovo-thinkpad-x13s.dtb: displayport-controller@aea0000: #sound-dai-cells: False schema does not allow [[0]

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20231107103540.27353-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sc8180x-primus: drop sound-dai-cells from eDisplayPort

Qualcomm MDSS Embedded DisplayPort bindings do not allow
sound-dai-cells:

  sc8180x-primus.dtb: displayport-controller@ae9a000: #sound-dai-cells: False schema does not allow [[0]]

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20231107103540.27353-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8250: correct Soundwire node name

Soundwire Devicetree bindings expect the Soundwire controller device
node to be named just "soundwire":

  sm8250-xiaomi-elish-boe.dtb: soundwire-controller@3250000: $nodename:0: 'soundwire-controller@3250000' does not match '^soundwire(@.*)?$'

Reported-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231107102111.16465-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sc8280xp: correct Soundwire node name

Soundwire Devicetree bindings expect the Soundwire controller device
node to be named just "soundwire":

  sc8280xp-lenovo-thinkpad-x13s.dtb: soundwire-controller@3210000: $nodename:0: 'soundwire-controller@3210000' does not match '^soundwire(@.*)?$'

Reported-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231107102111.16465-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: qdu1000-idp: drop unused LLCC multi-ch-bit-off

There is no "multi-ch-bit-off" property in LLCC, according to bindings
and Linux driver:

  qdu1000-idp.dtb: system-cache-controller@19200000: 'multi-ch-bit-off' does not match any of the regexes: 'pinctrl-[0-9]+'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Mukesh Ojha <quic_mojha@quicinc.com>
Link: https://lore.kernel.org/r/20231107080417.16700-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: qdu1000: correct LLCC reg entries

According to bindings and Linux driver there is no
"multi_channel_register" address space for LLCC.  The first "reg" entry
is supposed to be llcc0_base since commit 43aa006e074c ("dt-bindings:
arm: msm: Fix register regions used for LLCC banks"):

  qdu1000-idp.dtb: system-cache-controller@19200000: reg: [[0, 421527552, 0, 14155776], [0, 438304768, 0, 524288], [0, 572293416, 0, 4]] is too long
  qdu1000-idp.dtb: system-cache-controller@19200000: reg-names:0: 'llcc0_base' was expected
  qdu1000-idp.dtb: system-cache-controller@19200000: reg-names: ['llcc_base', 'llcc_broadcast_base', 'multi_channel_register'] is too long

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Mukesh Ojha <quic_mojha@quicinc.com>
Link: https://lore.kernel.org/r/20231107080417.16700-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8450: fix soundwire controllers node name

Fix the following dt bindings check:
arch/arm64/boot/dts/qcom/sm8450-hdk.dtb: soundwire-controller@31f0000: $nodename:0: 'soundwire-controller@31f0000' does not match '^soundwire(@.*)?$'
        from schema $id: http://devicetree.org/schemas/soundwire/qcom,soundwire.yaml#

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231106-topic-sm8450-upstream-soundwire-bindings-fix-v1-1-41d4844a5a7d@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8550: fix soundwire controllers node name

Fix the following dt bindings check:
arch/arm64/boot/dts/qcom/sm8550-mtp.dtb: soundwire-controller@6ab0000: $nodename:0: 'soundwire-controller@6ab0000' does not match '^soundwire(@.*)?$'
from schema $id: http://devicetree.org/schemas/soundwire/qcom,soundwire.yaml#

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231106-topic-sm8550-upstream-soundwire-bindings-fix-v1-1-4ded91c805a1@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

dt-bindings: clock: qcom: Document the SM8650 RPMH Clock Controller

Add bindings documentation for the SM8650 RPMH Clock Controller.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231106-topic-sm8650-upstream-clocks-v3-5-761a6fadb4c0@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

dt-bindings: clock: qcom: document the SM8650 GPU Clock Controller

Add bindings documentation for the SM8650 Graphics Clock Controller.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231106-topic-sm8650-upstream-clocks-v3-4-761a6fadb4c0@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

dt-bindings: clock: qcom: document the SM8650 Display Clock Controller

Add bindings documentation for the SM8650 Display Clock Controller.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231106-topic-sm8650-upstream-clocks-v3-3-761a6fadb4c0@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

dt-bindings: clock: qcom: document the SM8650 General Clock Controller

Add bindings documentation for the SM8650 General Clock Controller.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231106-topic-sm8650-upstream-clocks-v3-2-761a6fadb4c0@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>