spi: qup: add missing clk_disable_unprepare on error in spi_qup_resume()

[ Upstream commit 70034320fdc597b8f58b4a43bb547f17c4c5557a ]

Add the missing clk_disable_unprepare() before return
from spi_qup_resume() in the error handling case.

Fixes: 64ff247a978f (“spi: Add Qualcomm QUP SPI controller support”)
Signed-off-by: Xu Qiang <xuqiang36@huawei.com>
Link: https://lore.kernel.org/r/20220825065324.68446-1-xuqiang36@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/xsk: Avoid use-after-free on ctx

[ Upstream commit af515a5587b8f45f19e11657746e0c89411b0380 ]

The put lowers the reference count to 0 and frees ctx, reading it
afterwards is invalid. Move the put after the uses and determine the
last use by the reference count being 1.

Fixes: 39e940d4abfa ("selftests/xsk: Destroy BPF resources only when ctx refcount drops to 0")
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20220901202645.1463552-1-irogers@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: rtl8xxxu: tighten bounds checking in rtl8xxxu_read_efuse()

[ Upstream commit 620d5eaeb9059636864bda83ca1c68c20ede34a5 ]

There some bounds checking to ensure that "map_addr" is not out of
bounds before the start of the loop.  But the checking needs to be
done as we iterate through the loop because "map_addr" gets larger as
we iterate.

Fixes: 26f1fad29ad9 ("New driver: rtl8xxxu (mac80211)")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Jes Sorensen <Jes.Sorensen@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/Yv8eGLdBslLAk3Ct@kili
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: btusb: mediatek: fix WMT failure during runtime suspend

[ Upstream commit fd3f106677bac70437dc12e76c827294ed495a44 ]

WMT cmd/event doesn't follow up the generic HCI cmd/event handling, it
needs constantly polling control pipe until the host received the WMT
event, thus, we should require to specifically acquire PM counter on the
USB to prevent the interface from entering auto suspended while WMT
cmd/event in progress.

Fixes: a1c49c434e15 ("Bluetooth: btusb: Add protocol support for MediaTek MT7668U USB devices")
Co-developed-by: Jing Cai <jing.cai@mediatek.com>
Signed-off-by: Jing Cai <jing.cai@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: btusb: fix excessive stack usage

[ Upstream commit 10888140f09c3472146dc206accd0cfa051d0ed4 ]

Enlarging the size of 'struct btmtk_hci_wmt_cmd' makes it no longer
fit on the kernel stack, as seen from this compiler warning:

drivers/bluetooth/btusb.c:3365:12: error: stack frame size of 1036 bytes in function 'btusb_mtk_hci_wmt_sync' [-Werror,-Wframe-larger-than=]

Change the function to dynamically allocate the buffer instead.
As there are other sleeping functions called from the same location,
using GFP_KERNEL should be fine here, and the runtime overhead should
not matter as this is rarely called.

Unfortunately, I could not figure out why the message size is
increased in the previous patch. Using dynamic allocation means
any size is possible now, but there is still a range check that
limits the total size (including the five-byte header) to 255
bytes, so whatever was intended there is now undone.

Fixes: 48c13301e6ba ("Bluetooth: btusb: Fine-tune mt7663 mechanism.")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Stable-dep-of: fd3f106677ba ("Bluetooth: btusb: mediatek: fix WMT failure during runtime suspend")
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: btusb: Fine-tune mt7663 mechanism.

[ Upstream commit 48c13301e6baba5fd0960b412af519c0baa98011 ]

Fine-tune read register for mt7663/mt7921.
For mediatek chip spcific wmt protocol, we add more delay to send EP0
In-Token.

Signed-off-by: Mark Chen <Mark-YW.Chen@mediatek.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Stable-dep-of: fd3f106677ba ("Bluetooth: btusb: mediatek: fix WMT failure during runtime suspend")
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/resctrl: Fix to restore to original value when re-enabling hardware prefetch register

[ Upstream commit 499c8bb4693d1c8d8f3d6dd38e5bdde3ff5bd906 ]

The current pseudo_lock.c code overwrites the value of the
MSR_MISC_FEATURE_CONTROL to 0 even if the original value is not 0.
Therefore, modify it to save and restore the original values.

Fixes: 018961ae5579 ("x86/intel_rdt: Pseudo-lock region creation/removal core")
Fixes: 443810fe6160 ("x86/intel_rdt: Create debugfs files for pseudo-locking testing")
Fixes: 8a2fc0e1bc0c ("x86/intel_rdt: More precise L2 hit/miss measurements")
Signed-off-by: Kohei Tarumizu <tarumizu.kohei@fujitsu.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lkml.kernel.org/r/eb660f3c2010b79a792c573c02d01e8e841206ad.1661358182.git.reinette.chatre@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: mt7621: Fix an error message in mt7621_spi_probe()

[ Upstream commit 2b2bf6b7faa9010fae10dc7de76627a3fdb525b3 ]

'status' is known to be 0 at this point. The expected error code is
PTR_ERR(clk).

Switch to dev_err_probe() in order to display the expected error code (in a
human readable way).
This also filters -EPROBE_DEFER cases, should it happen.

Fixes: 1ab7f2a43558 ("staging: mt7621-spi: add mt7621 support")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/928f3fb507d53ba0774df27cea0bbba4b055993b.1661599671.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpftool: Fix a wrong type cast in btf_dumper_int

[ Upstream commit 7184aef9c0f7a81db8fd18d183ee42481d89bf35 ]

When `data` points to a boolean value, casting it to `int *` is problematic
and could lead to a wrong value being passed to `jsonw_bool`. Change the
cast to `bool *` instead.

Fixes: b12d6ec09730 ("bpf: btf: add btf print functionality")
Signed-off-by: Lam Thai <lamthai@arista.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20220824225859.9038-1-lamthai@arista.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: mac80211: allow bw change during channel switch in mesh

[ Upstream commit 6b75f133fe05c36c52d691ff21545d5757fff721 ]

From 'IEEE Std 802.11-2020 section 11.8.8.4.1':
  The mesh channel switch may be triggered by the need to avoid
  interference to a detected radar signal, or to reassign mesh STA
  channels to ensure the MBSS connectivity.

  A 20/40 MHz MBSS may be changed to a 20 MHz MBSS and a 20 MHz
  MBSS may be changed to a 20/40 MHz MBSS.

Since the standard allows the change of bandwidth during
the channel switch in mesh, remove the bandwidth check present in
ieee80211_set_csa_beacon.

Fixes: c6da674aff94 ("{nl,cfg,mac}80211: enable the triggering of CSA frame in mesh")
Signed-off-by: Hari Chandrakanthan <quic_haric@quicinc.com>
Link: https://lore.kernel.org/r/1658903549-21218-1-git-send-email-quic_haric@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

leds: lm3601x: Don't use mutex after it was destroyed

[ Upstream commit 32f7eed0c763a9b89f6b357ec54b48398fc7b99e ]

The mutex might still be in use until the devm cleanup callback
devm_led_classdev_flash_release() is called. This only happens some time
after lm3601x_remove() completed.

Fixes: e63a744871a3 ("leds: lm3601x: Convert class registration to device managed")
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: ath10k: add peer map clean up for peer delete in ath10k_sta_state()

[ Upstream commit f020d9570a04df0762a2ac5c50cf1d8c511c9164 ]

When peer delete failed in a disconnect operation, use-after-free
detected by KFENCE in below log. It is because for each vdev_id and
address, it has only one struct ath10k_peer, it is allocated in
ath10k_peer_map_event(). When connected to an AP, it has more than
one HTT_T2H_MSG_TYPE_PEER_MAP reported from firmware, then the
array peer_map of struct ath10k will be set muti-elements to the
same ath10k_peer in ath10k_peer_map_event(). When peer delete failed
in ath10k_sta_state(), the ath10k_peer will be free for the 1st peer
id in array peer_map of struct ath10k, and then use-after-free happened
for the 2nd peer id because they map to the same ath10k_peer.

And clean up all peers in array peer_map for the ath10k_peer, then
user-after-free disappeared

peer map event log:
[  306.911021] wlan0: authenticate with b0:2a:43:e6:75:0e
[  306.957187] ath10k_pci 0000:01:00.0: mac vdev 0 peer create b0:2a:43:e6:75:0e (new sta) sta 1 / 32 peer 1 / 33
[  306.957395] ath10k_pci 0000:01:00.0: htt peer map vdev 0 peer b0:2a:43:e6:75:0e id 246
[  306.957404] ath10k_pci 0000:01:00.0: htt peer map vdev 0 peer b0:2a:43:e6:75:0e id 198
[  306.986924] ath10k_pci 0000:01:00.0: htt peer map vdev 0 peer b0:2a:43:e6:75:0e id 166

peer unmap event log:
[  435.715691] wlan0: deauthenticating from b0:2a:43:e6:75:0e by local choice (Reason: 3=DEAUTH_LEAVING)
[  435.716802] ath10k_pci 0000:01:00.0: mac vdev 0 peer delete b0:2a:43:e6:75:0e sta ffff990e0e9c2b50 (sta gone)
[  435.717177] ath10k_pci 0000:01:00.0: htt peer unmap vdev 0 peer b0:2a:43:e6:75:0e id 246
[  435.717186] ath10k_pci 0000:01:00.0: htt peer unmap vdev 0 peer b0:2a:43:e6:75:0e id 198
[  435.717193] ath10k_pci 0000:01:00.0: htt peer unmap vdev 0 peer b0:2a:43:e6:75:0e id 166

use-after-free log:
[21705.888627] wlan0: deauthenticating from d0:76:8f:82:be:75 by local choice (Reason: 3=DEAUTH_LEAVING)
[21713.799910] ath10k_pci 0000:01:00.0: failed to delete peer d0:76:8f:82:be:75 for vdev 0: -110
[21713.799925] ath10k_pci 0000:01:00.0: found sta peer d0:76:8f:82:be:75 (ptr 0000000000000000 id 102) entry on vdev 0 after it was supposedly removed
[21713.799968] ==================================================================
[21713.799991] BUG: KFENCE: use-after-free read in ath10k_sta_state+0x265/0xb8a [ath10k_core]
[21713.799991]
[21713.799997] Use-after-free read at 0x00000000abe1c75e (in kfence-#69):
[21713.800010]  ath10k_sta_state+0x265/0xb8a [ath10k_core]
[21713.800041]  drv_sta_state+0x115/0x677 [mac80211]
[21713.800059]  __sta_info_destroy_part2+0xb1/0x133 [mac80211]
[21713.800076]  __sta_info_flush+0x11d/0x162 [mac80211]
[21713.800093]  ieee80211_set_disassoc+0x12d/0x2f4 [mac80211]
[21713.800110]  ieee80211_mgd_deauth+0x26c/0x29b [mac80211]
[21713.800137]  cfg80211_mlme_deauth+0x13f/0x1bb [cfg80211]
[21713.800153]  nl80211_deauthenticate+0xf8/0x121 [cfg80211]
[21713.800161]  genl_rcv_msg+0x38e/0x3be
[21713.800166]  netlink_rcv_skb+0x89/0xf7
[21713.800171]  genl_rcv+0x28/0x36
[21713.800176]  netlink_unicast+0x179/0x24b
[21713.800181]  netlink_sendmsg+0x3a0/0x40e
[21713.800187]  sock_sendmsg+0x72/0x76
[21713.800192]  ____sys_sendmsg+0x16d/0x1e3
[21713.800196]  ___sys_sendmsg+0x95/0xd1
[21713.800200]  __sys_sendmsg+0x85/0xbf
[21713.800205]  do_syscall_64+0x43/0x55
[21713.800210]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[21713.800213]
[21713.800219] kfence-#69: 0x000000009149b0d5-0x000000004c0697fb, size=1064, cache=kmalloc-2k
[21713.800219]
[21713.800224] allocated by task 13 on cpu 0 at 21705.501373s:
[21713.800241]  ath10k_peer_map_event+0x7e/0x154 [ath10k_core]
[21713.800254]  ath10k_htt_t2h_msg_handler+0x586/0x1039 [ath10k_core]
[21713.800265]  ath10k_htt_htc_t2h_msg_handler+0x12/0x28 [ath10k_core]
[21713.800277]  ath10k_htc_rx_completion_handler+0x14c/0x1b5 [ath10k_core]
[21713.800283]  ath10k_pci_process_rx_cb+0x195/0x1df [ath10k_pci]
[21713.800294]  ath10k_ce_per_engine_service+0x55/0x74 [ath10k_core]
[21713.800305]  ath10k_ce_per_engine_service_any+0x76/0x84 [ath10k_core]
[21713.800310]  ath10k_pci_napi_poll+0x49/0x144 [ath10k_pci]
[21713.800316]  net_rx_action+0xdc/0x361
[21713.800320]  __do_softirq+0x163/0x29a
[21713.800325]  asm_call_irq_on_stack+0x12/0x20
[21713.800331]  do_softirq_own_stack+0x3c/0x48
[21713.800337]  __irq_exit_rcu+0x9b/0x9d
[21713.800342]  common_interrupt+0xc9/0x14d
[21713.800346]  asm_common_interrupt+0x1e/0x40
[21713.800351]  ksoftirqd_should_run+0x5/0x16
[21713.800357]  smpboot_thread_fn+0x148/0x211
[21713.800362]  kthread+0x150/0x15f
[21713.800367]  ret_from_fork+0x22/0x30
[21713.800370]
[21713.800374] freed by task 708 on cpu 1 at 21713.799953s:
[21713.800498]  ath10k_sta_state+0x2c6/0xb8a [ath10k_core]
[21713.800515]  drv_sta_state+0x115/0x677 [mac80211]
[21713.800532]  __sta_info_destroy_part2+0xb1/0x133 [mac80211]
[21713.800548]  __sta_info_flush+0x11d/0x162 [mac80211]
[21713.800565]  ieee80211_set_disassoc+0x12d/0x2f4 [mac80211]
[21713.800581]  ieee80211_mgd_deauth+0x26c/0x29b [mac80211]
[21713.800598]  cfg80211_mlme_deauth+0x13f/0x1bb [cfg80211]
[21713.800614]  nl80211_deauthenticate+0xf8/0x121 [cfg80211]
[21713.800619]  genl_rcv_msg+0x38e/0x3be
[21713.800623]  netlink_rcv_skb+0x89/0xf7
[21713.800628]  genl_rcv+0x28/0x36
[21713.800632]  netlink_unicast+0x179/0x24b
[21713.800637]  netlink_sendmsg+0x3a0/0x40e
[21713.800642]  sock_sendmsg+0x72/0x76
[21713.800646]  ____sys_sendmsg+0x16d/0x1e3
[21713.800651]  ___sys_sendmsg+0x95/0xd1
[21713.800655]  __sys_sendmsg+0x85/0xbf
[21713.800659]  do_syscall_64+0x43/0x55
[21713.800663]  entry_SYSCALL_64_after_hwframe+0x44/0xa9

Tested-on: QCA6174 hw3.2 PCI WLAN.RM.4.4.1-00288-QCARMSWPZ-1

Fixes: d0eeafad1189 ("ath10k: Clean up peer when sta goes away.")
Signed-off-by: Wen Gong <quic_wgong@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220801141930.16794-1-quic_wgong@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

nfsd: Fix a memory leak in an error handling path

[ Upstream commit fd1ef88049de09bc70d60b549992524cfc0e66ff ]

If this memdup_user() call fails, the memory allocated in a previous call
a few lines above should be freed. Otherwise it leaks.

Fixes: 6ee95d1c8991 ("nfsd: add support for upcall version 2")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

objtool: Preserve special st_shndx indexes in elf_update_symbol

[ Upstream commit 5141d3a06b2da1731ac82091298b766a1f95d3d8 ]

elf_update_symbol fails to preserve the special st_shndx values
between [SHN_LORESERVE, SHN_HIRESERVE], which results in it
converting SHN_ABS entries into SHN_UNDEF, for example. Explicitly
check for the special indexes and ensure these symbols are not
marked undefined.

Fixes: ead165fa1042 ("objtool: Fix symbol creation")
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220908215504.3686827-17-samitolvanen@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: 9247/1: mm: set readonly for MT_MEMORY_RO with ARM_LPAE

[ Upstream commit 14ca1a4690750bb54e1049e49f3140ef48958a6e ]

MT_MEMORY_RO is introduced by commit 598f0a99fa8a ("ARM: 9210/1:
Mark the FDT_FIXED sections as shareable"), which is a readonly
memory type for FDT area, but there are some different between
ARM_LPAE and non-ARM_LPAE, we need to setup PMD_SECT_AP2 and
L_PMD_SECT_RDONLY for MT_MEMORY_RO when ARM_LAPE enabled.

non-ARM_LPAE 0xff800000-0xffa00000           2M PGD KERNEL      ro NX SHD
ARM_LPAE 0xff800000-0xffc00000           4M PMD RW NX SHD
ARM_LPAE+fix 0xff800000-0xffc00000           4M PMD ro NX SHD

Fixes: 598f0a99fa8a ("ARM: 9210/1: Mark the FDT_FIXED sections as shareable")
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: 9244/1: dump: Fix wrong pg_level in walk_pmd()

[ Upstream commit 2ccd19b3ffac07cc7e75a2bd1ed779728bb67197 ]

After ARM supports p4d page tables, the pg_level for note_page()
in walk_pmd() should be 4, not 3, fix it.

Fixes: 84e6ffb2c49c ("arm: add support for folded p4d page tables")
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

MIPS: SGI-IP27: Fix platform-device leak in bridge_platform_create()

[ Upstream commit 11bec9cba4de06b3c0e9e4041453c2caaa1cbec1 ]

In error case in bridge_platform_create after calling
platform_device_add()/platform_device_add_data()/
platform_device_add_resources(), release the failed
'pdev' or it will be leak, call platform_device_put()
to fix this problem.

Besides, 'pdev' is divided into 'pdev_wd' and 'pdev_bd',
use platform_device_unregister() to release sgi_w1
resources when xtalk-bridge registration fails.

Fixes: 5dc76a96e95a ("MIPS: PCI: use information from 1-wire PROM for IOC3 detection")
Signed-off-by: Lin Yujun <linyujun809@huawei.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

MIPS: SGI-IP27: Free some unused memory

[ Upstream commit 33d7085682b4aa212ebfadbc21da81dfefaaac16 ]

platform_device_add_data() duplicates the memory it is passed. So we can
free some memory to save a few bytes that would remain unused otherwise.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Stable-dep-of: 11bec9cba4de ("MIPS: SGI-IP27: Fix platform-device leak in bridge_platform_create()")
Signed-off-by: Sasha Levin <sashal@kernel.org>

sh: machvec: Use char[] for section boundaries

[ Upstream commit c5783af354688b24abd359f7086c282ec74de993 ]

As done for other sections, define the extern as a character array,
which relaxes many of the compiler-time object size checks, which would
otherwise assume it's a single long. Solves the following build error:

arch/sh/kernel/machvec.c: error: array subscript 'struct sh_machine_vector[0]' is partly outside array bounds of 'long int[1]' [-Werror=array-bounds]:  => 105:33

Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: linux-sh@vger.kernel.org
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/lkml/alpine.DEB.2.22.394.2209050944290.964530@ramsan.of.borg/
Fixes: 9655ad03af2d ("sh: Fixup machvec support.")
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Acked-by: Rich Felker <dalias@libc.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

userfaultfd: open userfaultfds with O_RDONLY

[ Upstream commit abec3d015fdfb7c63105c7e1c956188bf381aa55 ]

Since userfaultfd doesn't implement a write operation, it is more
appropriate to open it read-only.

When userfaultfds are opened read-write like it is now, and such fd is
passed from one process to another, SELinux will check both read and
write permissions for the target process, even though it can't actually
do any write operation on the fd later.

Inspired by the following bug report, which has hit the SELinux scenario
described above:
https://bugzilla.redhat.com/show_bug.cgi?id=1974559

Reported-by: Robert O'Callahan <roc@ocallahan.org>
Fixes: 86039bd3b4e6 ("userfaultfd: add new syscall to provide memory externalization")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Acked-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selinux: use "grep -E" instead of "egrep"

commit c969bb8dbaf2f3628927eae73e7c579a74cf1b6e upstream.

The latest version of grep claims that egrep is now obsolete so the build
now contains warnings that look like:
egrep: warning: egrep is obsolescent; using grep -E
fix this by using "grep -E" instead.

Cc: Paul Moore <paul@paul-moore.com>
Cc: Stephen Smalley <stephen.smalley.work@gmail.com>
Cc: Eric Paris <eparis@parisplace.org>
Cc: selinux@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[PM: tweak to remove vdso reference, cleanup subj line]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

smb3: must initialize two ACL struct fields to zero

commit f09bd695af3b8ab46fc24e5d6954a24104c38387 upstream.

Coverity spotted that we were not initalizing Stbz1 and Stbz2 to
zero in create_sd_buf.

Addresses-Coverity: 1513848 ("Uninitialized scalar variable")
Cc: <stable@vger.kernel.org>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915: Fix watermark calculations for gen12+ MC CCS modifier

commit 484b2b9281000274ef7c5cb0a9ebc5da6f5c281c upstream.

Take the gen12+ MC CCS modifier into account when calculating the
watermarks. Othwerwise we'll calculate the watermarks thinking this
Y-tiled modifier is linear.

The rc_surface part is actually a nop since that is not used
for any glk+ platform.

v2: Split RC CCS vs. MC CCS to separate patches

Cc: stable@vger.kernel.org
Fixes: 2dfbf9d2873a ("drm/i915/tgl: Gen-12 display can decompress surfaces compressed by the media engine")
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221003111544.8007-3-ville.syrjala@linux.intel.com
(cherry picked from commit 91c9651425fe955b1387f3637607dda005f3f710)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915: Fix watermark calculations for gen12+ RC CCS modifier

commit c56453a00f19ccddee302f5f9fe96b80e0b47fd3 upstream.

Take the gen12+ RC CCS modifier into account when calculating the
watermarks. Othwerwise we'll calculate the watermarks thinking this
Y-tiled modifier is linear.

The rc_surface part is actually a nop since that is not used
for any glk+ platform.

v2: Split RC CCS vs. MC CCS to separate patches

Cc: stable@vger.kernel.org
Fixes: b3e57bccd68a ("drm/i915/tgl: Gen-12 render decompression")
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221003111544.8007-2-ville.syrjala@linux.intel.com
(cherry picked from commit a89a96a586114f67598c6391c75678b4dba5c2da)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/nouveau: fix a use-after-free in nouveau_gem_prime_import_sg_table()

commit 540dfd188ea2940582841c1c220bd035a7db0e51 upstream.

nouveau_bo_init() is backed by ttm_bo_init() and ferries its return code
back to the caller. On failures, ttm will call nouveau_bo_del_ttm() and
free the memory.Thus, when nouveau_bo_init() returns an error, the gem
object has already been released. Then the call to nouveau_bo_ref() will
use the freed "nvbo->bo" and lead to a use-after-free bug.

We should delete the call to nouveau_bo_ref() to avoid the use-after-free.

Signed-off-by: Jianglei Nie <niejianglei2021@163.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: 019cbd4a4feb ("drm/nouveau: Initialize GEM object before TTM object")
Cc: Thierry Reding <treding@nvidia.com>
Cc: <stable@vger.kernel.org> # v5.4+
Link: https://patchwork.freedesktop.org/patch/msgid/20220705132546.2247677-1-niejianglei2021@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/nouveau/kms/nv140-: Disable interlacing

commit 8ba9249396bef37cb68be9e8dee7847f1737db9d upstream.

As it turns out: while Nvidia does actually have interlacing knobs on their
GPU still pretty much no current GPUs since Volta actually support it.
Trying interlacing on these GPUs will result in NVDisplay being quite
unhappy like so:

nouveau 0000:1f:00.0: disp: chid 0 stat 00004802 reason 4 [INVALID_ARG] mthd 2008 data 00000001 code 00080000
nouveau 0000:1f:00.0: disp: chid 0 stat 10005080 reason 5 [INVALID_STATE] mthd 0200 data 00000001 code 00000001

So let's fix this by following the same behavior Nvidia's driver does and
disable interlacing entirely.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: stable@vger.kernel.org
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220816180436.156310-1-lyude@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: greybus: audio_helper: remove unused and wrong debugfs usage

commit d517cdeb904ddc0cbebcc959d43596426cac40b0 upstream.

In the greybus audio_helper code, the debugfs file for the dapm has the
potential to be removed and memory will be leaked.  There is also the
very real potential for this code to remove ALL debugfs entries from the
system, and it seems like this is what will really happen if this code
ever runs.  This all is very wrong as the greybus audio driver did not
create this debugfs file, the sound core did and controls the lifespan
of it.

So remove all of the debugfs logic from the audio_helper code as there's
no way it could be correct.  If this really is needed, it can come back
with a fixup for the incorrect usage of the debugfs_lookup() call which
is what caused this to be noticed at all.

Cc: Johan Hovold <johan@kernel.org>
Cc: Alex Elder <elder@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20220902143715.320500-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: VMX: Drop bits 31:16 when shoving exception error code into VMCS

commit eba9799b5a6efe2993cf92529608e4aa8163d73b upstream.

Deliberately truncate the exception error code when shoving it into the
VMCS (VM-Entry field for vmcs01 and vmcs02, VM-Exit field for vmcs12).
Intel CPUs are incapable of handling 32-bit error codes and will never
generate an error code with bits 31:16, but userspace can provide an
arbitrary error code via KVM_SET_VCPU_EVENTS.  Failure to drop the bits
on exception injection results in failed VM-Entry, as VMX disallows
setting bits 31:16.  Setting the bits on VM-Exit would at best confuse
L1, and at worse induce a nested VM-Entry failure, e.g. if L1 decided to
reinject the exception back into L2.

Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20220830231614.3580124-3-seanjc@google.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: nVMX: Unconditionally purge queued/injected events on nested "exit"

commit d953540430c5af57f5de97ea9e36253908204027 upstream.

Drop pending exceptions and events queued for re-injection when leaving
nested guest mode, even if the "exit" is due to VM-Fail, SMI, or forced
by host userspace.  Failure to purge events could result in an event
belonging to L2 being injected into L1.

This _should_ never happen for VM-Fail as all events should be blocked by
nested_run_pending, but it's possible if KVM, not the L1 hypervisor, is
the source of VM-Fail when running vmcs02.

SMI is a nop (barring unknown bugs) as recognition of SMI and thus entry
to SMM is blocked by pending exceptions and re-injected events.

Forced exit is definitely buggy, but has likely gone unnoticed because
userspace probably follows the forced exit with KVM_SET_VCPU_EVENTS (or
some other ioctl() that purges the queue).

Fixes: 4f350c6dbcb9 ("kvm: nVMX: Handle deferred early VMLAUNCH/VMRESUME failure properly")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20220830231614.3580124-2-seanjc@google.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86/emulator: Fix handing of POP SS to correctly set interruptibility

commit 6aa5c47c351b22c21205c87977c84809cd015fcf upstream.

The emulator checks the wrong variable while setting the CPU
interruptibility state, the target segment is embedded in the instruction
opcode, not the ModR/M register.  Fix the condition.

Signed-off-by: Michal Luczaj <mhal@rbox.co>
Fixes: a5457e7bcf9a ("KVM: emulate: POP SS triggers a MOV SS shadow too")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20220821215900.1419215-1-mhal@rbox.co
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: cedrus: Set the platform driver data earlier

commit 708938f8495147fe2e77a9a3e1015d8e6899323e upstream.

The cedrus_hw_resume() crashes with NULL deference on driver probe if
runtime PM is disabled because it uses platform data that hasn't been
set up yet. Fix this by setting the platform data earlier during probe.

Cc: stable@vger.kernel.org
Fixes: 50e761516f2b (media: platform: Add Cedrus VPU decoder driver)
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Acked-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

efi: libstub: drop pointless get_memory_map() call

commit d80ca810f096ff66f451e7a3ed2f0cd9ef1ff519 upstream.

Currently, the non-x86 stub code calls get_memory_map() redundantly,
given that the data it returns is never used anywhere. So drop the call.

Cc: <stable@vger.kernel.org> # v4.14+
Fixes: 24d7c494ce46 ("efi/arm-stub: Round up FDT allocation to mapping size")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

thunderbolt: Explicitly enable lane adapter hotplug events at startup

commit 5d2569cb4a65c373896ec0217febdf88739ed295 upstream.

Software that has run before the USB4 CM in Linux runs may have disabled
hotplug events for a given lane adapter.

Other CMs such as that one distributed with Windows 11 will enable hotplug
events. Do the same thing in the Linux CM which fixes hotplug events on
"AMD Pink Sardine".

Cc: stable@vger.kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing: Disable interrupt or preemption before acquiring arch_spinlock_t

commit c0a581d7126c0bbc96163276f585fd7b4e4d8d0e upstream.

It was found that some tracing functions in kernel/trace/trace.c acquire
an arch_spinlock_t with preemption and irqs enabled. An example is the
tracing_saved_cmdlines_size_read() function which intermittently causes
a "BUG: using smp_processor_id() in preemptible" warning when the LTP
read_all_proc test is run.

That can be problematic in case preemption happens after acquiring the
lock. Add the necessary preemption or interrupt disabling code in the
appropriate places before acquiring an arch_spinlock_t.

The convention here is to disable preemption for trace_cmdline_lock and
interupt for max_lock.

Link: https://lkml.kernel.org/r/20220922145622.1744826-1-longman@redhat.com
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Will Deacon <will@kernel.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: stable@vger.kernel.org
Fixes: a35873a0993b ("tracing: Add conditional snapshot")
Fixes: 939c7a4f04fc ("tracing: Introduce saved_cmdlines_size file")
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ring-buffer: Fix race between reset page and reading page

commit a0fcaaed0c46cf9399d3a2d6e0c87ddb3df0e044 upstream.

The ring buffer is broken up into sub buffers (currently of page size).
Each sub buffer has a pointer to its "tail" (the last event written to the
sub buffer). When a new event is requested, the tail is locally
incremented to cover the size of the new event. This is done in a way that
there is no need for locking.

If the tail goes past the end of the sub buffer, the process of moving to
the next sub buffer takes place. After setting the current sub buffer to
the next one, the previous one that had the tail go passed the end of the
sub buffer needs to be reset back to the original tail location (before
the new event was requested) and the rest of the sub buffer needs to be
"padded".

The race happens when a reader takes control of the sub buffer. As readers
do a "swap" of sub buffers from the ring buffer to get exclusive access to
the sub buffer, it replaces the "head" sub buffer with an empty sub buffer
that goes back into the writable portion of the ring buffer. This swap can
happen as soon as the writer moves to the next sub buffer and before it
updates the last sub buffer with padding.

Because the sub buffer can be released to the reader while the writer is
still updating the padding, it is possible for the reader to see the event
that goes past the end of the sub buffer. This can cause obvious issues.

To fix this, add a few memory barriers so that the reader definitely sees
the updates to the sub buffer, and also waits until the writer has put
back the "tail" of the sub buffer back to the last event that was written
on it.

To be paranoid, it will only spin for 1 second, otherwise it will
warn and shutdown the ring buffer code. 1 second should be enough as
the writer does have preemption disabled. If the writer doesn't move
within 1 second (with preemption disabled) something is horribly
wrong. No interrupt should last 1 second!

Link: https://lore.kernel.org/all/20220830120854.7545-1-jiazi.li@transsion.com/
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216369
Link: https://lkml.kernel.org/r/20220929104909.0650a36c@gandalf.local.home
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: stable@vger.kernel.org
Fixes: c7b0930857e22 ("ring-buffer: prevent adding write in discarded area")
Reported-by: Jiazi.Li <jiazi.li@transsion.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ring-buffer: Add ring_buffer_wake_waiters()

commit 7e9fbbb1b776d8d7969551565bc246f74ec53b27 upstream.

On closing of a file that represents a ring buffer or flushing the file,
there may be waiters on the ring buffer that needs to be woken up and exit
the ring_buffer_wait() function.

Add ring_buffer_wake_waiters() to wake up the waiters on the ring buffer
and allow them to exit the wait loop.

Link: https://lkml.kernel.org/r/20220928133938.28dc2c27@gandalf.local.home
Cc: stable@vger.kernel.org
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Fixes: 15693458c4bc0 ("tracing/ring-buffer: Move poll wake ups into ring buffer code")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ring-buffer: Check pending waiters when doing wake ups as well

commit ec0bbc5ec5664dcee344f79373852117dc672c86 upstream.

The wake up waiters only checks the "wakeup_full" variable and not the
"full_waiters_pending". The full_waiters_pending is set when a waiter is
added to the wait queue. The wakeup_full is only set when an event is
triggered, and it clears the full_waiters_pending to avoid multiple calls
to irq_work_queue().

The irq_work callback really needs to check both wakeup_full as well as
full_waiters_pending such that this code can be used to wake up waiters
when a file is closed that represents the ring buffer and the waiters need
to be woken up.

Link: https://lkml.kernel.org/r/20220927231824.209460321@goodmis.org
Cc: stable@vger.kernel.org
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Fixes: 15693458c4bc0 ("tracing/ring-buffer: Move poll wake ups into ring buffer code")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ring-buffer: Have the shortest_full queue be the shortest not longest

commit 3b19d614b61b93a131f463817e08219c9ce1fee3 upstream.

The logic to know when the shortest waiters on the ring buffer should be
woken up or not has uses a less than instead of a greater than compare,
which causes the shortest_full to actually be the longest.

Link: https://lkml.kernel.org/r/20220927231823.718039222@goodmis.org
Cc: stable@vger.kernel.org
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Fixes: 2c2b0a78b3739 ("ring-buffer: Add percentage of ring buffer full to wake up reader")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ring-buffer: Allow splice to read previous partially read pages

commit fa8f4a89736b654125fb254b0db753ac68a5fced upstream.

If a page is partially read, and then the splice system call is run
against the ring buffer, it will always fail to read, no matter how much
is in the ring buffer. That's because the code path for a partial read of
the page does will fail if the "full" flag is set.

The splice system call wants full pages, so if the read of the ring buffer
is not yet full, it should return zero, and the splice will block. But if
a previous read was done, where the beginning has been consumed, it should
still be given to the splice caller if the rest of the page has been
written to.

This caused the splice command to never consume data in this scenario, and
let the ring buffer just fill up and lose events.

Link: https://lkml.kernel.org/r/20220927144317.46be6b80@gandalf.local.home
Cc: stable@vger.kernel.org
Fixes: 8789a9e7df6bf ("ring-buffer: read page interface")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ftrace: Properly unset FTRACE_HASH_FL_MOD

commit 0ce0638edf5ec83343302b884fa208179580700a upstream.

When executing following commands like what document said, but the log
"#### all functions enabled ####" was not shown as expect:
  1. Set a 'mod' filter:
    $ echo 'write*:mod:ext3' > /sys/kernel/tracing/set_ftrace_filter
  2. Invert above filter:
    $ echo '!write*:mod:ext3' >> /sys/kernel/tracing/set_ftrace_filter
  3. Read the file:
    $ cat /sys/kernel/tracing/set_ftrace_filter

By some debugging, I found that flag FTRACE_HASH_FL_MOD was not unset
after inversion like above step 2 and then result of ftrace_hash_empty()
is incorrect.

Link: https://lkml.kernel.org/r/20220926152008.2239274-1-zhengyejian1@huawei.com
Cc: <mingo@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 8c08f0d5c6fb ("ftrace: Have cached module filters be an active filter")
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

livepatch: fix race between fork and KLP transition

commit 747f7a2901174c9afa805dddfb7b24db6f65e985 upstream.

The KLP transition code depends on the TIF_PATCH_PENDING and
the task->patch_state to stay in sync. On a normal (forward)
transition, TIF_PATCH_PENDING will be set on every task in
the system, while on a reverse transition (after a failed
forward one) first TIF_PATCH_PENDING will be cleared from
every task, followed by it being set on tasks that need to
be transitioned back to the original code.

However, the fork code copies over the TIF_PATCH_PENDING flag
from the parent to the child early on, in dup_task_struct and
setup_thread_stack. Much later, klp_copy_process will set
child->patch_state to match that of the parent.

However, the parent's patch_state may have been changed by KLP loading
or unloading since it was initially copied over into the child.

This results in the KLP code occasionally hitting this warning in
klp_complete_transition:

        for_each_process_thread(g, task) {
                WARN_ON_ONCE(test_tsk_thread_flag(task, TIF_PATCH_PENDING));
                task->patch_state = KLP_UNDEFINED;
        }

Set, or clear, the TIF_PATCH_PENDING flag in the child task
depending on whether or not it is needed at the time
klp_copy_process is called, at a point in copy_process where the
tasklist_lock is held exclusively, preventing races with the KLP
code.

The KLP code does have a few places where the state is changed
without the tasklist_lock held, but those should not cause
problems because klp_update_patch_state(current) cannot be
called while the current task is in the middle of fork,
klp_check_and_switch_task() which is called under the pi_lock,
which prevents rescheduling, and manipulation of the patch
state of idle tasks, which do not fork.

This should prevent this warning from triggering again in the
future, and close the race for both normal and reverse transitions.

Signed-off-by: Rik van Riel <riel@surriel.com>
Reported-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Fixes: d83a7cb375ee ("livepatch: change to a per-task consistency model")
Cc: stable@kernel.org
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20220808150019.03d6a67b@imladris.surriel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: update 'state->fc_regions_size' after successful memory allocation

commit 27cd49780381c6ccbf248798e5e8fd076200ffba upstream.

To avoid to 'state->fc_regions_size' mismatch with 'state->fc_regions'
when fail to reallocate 'fc_reqions',only update 'state->fc_regions_size'
after 'state->fc_regions' is allocated successfully.

Cc: stable@kernel.org
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220921064040.3693255-4-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix potential memory leak in ext4_fc_record_regions()

commit 7069d105c1f15c442b68af43f7fde784f3126739 upstream.

As krealloc may return NULL, in this case 'state->fc_regions' may not be
freed by krealloc, but 'state->fc_regions' already set NULL. Then will
lead to 'state->fc_regions' memory leak.

Cc: stable@kernel.org
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220921064040.3693255-3-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix potential memory leak in ext4_fc_record_modified_inode()

commit 9305721a309fa1bd7c194e0d4a2335bf3b29dca4 upstream.

As krealloc may return NULL, in this case 'state->fc_modified_inodes'
may not be freed by krealloc, but 'state->fc_modified_inodes' already
set NULL. Then will lead to 'state->fc_modified_inodes' memory leak.

Cc: stable@kernel.org
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220921064040.3693255-2-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix miss release buffer head in ext4_fc_write_inode

commit ccbf8eeb39f2ff00b54726a2b20b35d788c4ecb5 upstream.

In 'ext4_fc_write_inode' function first call 'ext4_get_inode_loc' get 'iloc',
after use it miss release 'iloc.bh'.
So just release 'iloc.bh' before 'ext4_fc_write_inode' return.

Cc: stable@kernel.org
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220914100859.1415196-1-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: place buffer head allocation before handle start

commit d1052d236eddf6aa851434db1897b942e8db9921 upstream.

In our product environment, we encounter some jbd hung waiting handles to
stop while several writters were doing memory reclaim for buffer head
allocation in delay alloc write path. Ext4 do buffer head allocation with
holding transaction handle which may be blocked too long if the reclaim
works not so smooth. According to our bcc trace, the reclaim time in
buffer head allocation can reach 258s and the jbd transaction commit also
take almost the same time meanwhile. Except for these extreme cases,
we often see several seconds delays for cgroup memory reclaim on our
servers. This is more likely to happen considering docker environment.

One thing to note, the allocation of buffer heads is as often as page
allocation or more often when blocksize less than page size. Just like
page cache allocation, we should also place the buffer head allocation
before startting the handle.

Cc: stable@kernel.org
Signed-off-by: Jinke Han <hanjinke.666@bytedance.com>
Link: https://lore.kernel.org/r/20220903012429.22555-1-hanjinke.666@bytedance.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: ext4_read_bh_lock() should submit IO if the buffer isn't uptodate

commit 0b73284c564d3ae4feef4bc920292f004acf4980 upstream.

Recently we notice that ext4 filesystem would occasionally fail to read
metadata from disk and report error message, but the disk and block
layer looks fine. After analyse, we lockon commit 88dbcbb3a484
("blkdev: avoid migration stalls for blkdev pages"). It provide a
migration method for the bdev, we could move page that has buffers
without extra users now, but it lock the buffers on the page, which
breaks the fragile metadata read operation on ext4 filesystem,
ext4_read_bh_lock() was copied from ll_rw_block(), it depends on the
assumption of that locked buffer means it is under IO. So it just
trylock the buffer and skip submit IO if it lock failed, after
wait_on_buffer() we conclude IO error because the buffer is not
uptodate.

This issue could be easily reproduced by add some delay just after
buffer_migrate_lock_buffers() in __buffer_migrate_folio() and do
fsstress on ext4 filesystem.

  EXT4-fs error (device pmem1): __ext4_find_entry:1658: inode #73193:
  comm fsstress: reading directory lblock 0
  EXT4-fs error (device pmem1): __ext4_find_entry:1658: inode #75334:
  comm fsstress: reading directory lblock 0

Fix it by removing the trylock logic in ext4_read_bh_lock(), just lock
the buffer and submit IO if it's not uptodate, and also leave over
readahead helper.

Cc: stable@kernel.org
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220831074629.3755110-1-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: don't increase iversion counter for ea_inodes

commit 50f094a5580e6297bf10a807d16f0ee23fa576cf upstream.

ea_inodes are using i_version for storing part of the reference count so
we really need to leave it alone.

The problem can be reproduced by xfstest ext4/026 when iversion is
enabled. Fix it by not calling inode_inc_iversion() for EXT4_EA_INODE_FL
inodes in ext4_mark_iloc_dirty().

Cc: stable@kernel.org
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Link: https://lore.kernel.org/r/20220824160349.39664-1-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix check for block being out of directory size

commit 61a1d87a324ad5e3ed27c6699dfc93218fcf3201 upstream.

The check in __ext4_read_dirblock() for block being outside of directory
size was wrong because it compared block number against directory size
in bytes. Fix it.

Fixes: 65f8ea4cd57d ("ext4: check if directory block is within i_size")
CVE: CVE-2022-1184
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Link: https://lore.kernel.org/r/20220822114832.1482-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: make ext4_lazyinit_thread freezable

commit 3b575495ab8dbb4dbe85b4ac7f991693c3668ff5 upstream.

ext4_lazyinit_thread is not set freezable. Hence when the thread calls
try_to_freeze it doesn't freeze during suspend and continues to send
requests to the storage during suspend, resulting in suspend failures.

Cc: stable@kernel.org
Signed-off-by: Lalith Rajendran <lalithkraj@google.com>
Link: https://lore.kernel.org/r/20220818214049.1519544-1-lalithkraj@google.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix null-ptr-deref in ext4_write_info

commit f9c1f248607d5546075d3f731e7607d5571f2b60 upstream.

I caught a null-ptr-deref bug as follows:
==================================================================
KASAN: null-ptr-deref in range [0x0000000000000068-0x000000000000006f]
CPU: 1 PID: 1589 Comm: umount Not tainted 5.10.0-02219-dirty #339
RIP: 0010:ext4_write_info+0x53/0x1b0
[...]
Call Trace:
 dquot_writeback_dquots+0x341/0x9a0
 ext4_sync_fs+0x19e/0x800
 __sync_filesystem+0x83/0x100
 sync_filesystem+0x89/0xf0
 generic_shutdown_super+0x79/0x3e0
 kill_block_super+0xa1/0x110
 deactivate_locked_super+0xac/0x130
 deactivate_super+0xb6/0xd0
 cleanup_mnt+0x289/0x400
 __cleanup_mnt+0x16/0x20
 task_work_run+0x11c/0x1c0
 exit_to_user_mode_prepare+0x203/0x210
 syscall_exit_to_user_mode+0x5b/0x3a0
 do_syscall_64+0x59/0x70
 entry_SYSCALL_64_after_hwframe+0x44/0xa9
 ==================================================================

Above issue may happen as follows:
-------------------------------------
exit_to_user_mode_prepare
 task_work_run
  __cleanup_mnt
   cleanup_mnt
    deactivate_super
     deactivate_locked_super
      kill_block_super
       generic_shutdown_super
        shrink_dcache_for_umount
         dentry = sb->s_root
         sb->s_root = NULL              <--- Here set NULL
        sync_filesystem
         __sync_filesystem
          sb->s_op->sync_fs > ext4_sync_fs
           dquot_writeback_dquots
            sb->dq_op->write_info > ext4_write_info
             ext4_journal_start(d_inode(sb->s_root), EXT4_HT_QUOTA, 2)
              d_inode(sb->s_root)
               s_root->d_inode          <--- Null pointer dereference

To solve this problem, we use ext4_journal_start_sb directly
to avoid s_root being used.

Cc: stable@kernel.org
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220805123947.565152-1-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: avoid crash when inline data creation follows DIO write

commit 4bb26f2885ac6930984ee451b952c5a6042f2c0e upstream.

When inode is created and written to using direct IO, there is nothing
to clear the EXT4_STATE_MAY_INLINE_DATA flag. Thus when inode gets
truncated later to say 1 byte and written using normal write, we will
try to store the data as inline data. This confuses the code later
because the inode now has both normal block and inline data allocated
and the confusion manifests for example as:

kernel BUG at fs/ext4/inode.c:2721!
invalid opcode: 0000 [#1] PREEMPT SMP KASAN
CPU: 0 PID: 359 Comm: repro Not tainted 5.19.0-rc8-00001-g31ba1e3b8305-dirty #15
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-1.fc36 04/01/2014
RIP: 0010:ext4_writepages+0x363d/0x3660
RSP: 0018:ffffc90000ccf260 EFLAGS: 00010293
RAX: ffffffff81e1abcd RBX: 0000008000000000 RCX: ffff88810842a180
RDX: 0000000000000000 RSI: 0000008000000000 RDI: 0000000000000000
RBP: ffffc90000ccf650 R08: ffffffff81e17d58 R09: ffffed10222c680b
R10: dfffe910222c680c R11: 1ffff110222c680a R12: ffff888111634128
R13: ffffc90000ccf880 R14: 0000008410000000 R15: 0000000000000001
FS:  00007f72635d2640(0000) GS:ffff88811b000000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000565243379180 CR3: 000000010aa74000 CR4: 0000000000150eb0
Call Trace:
 <TASK>
 do_writepages+0x397/0x640
 filemap_fdatawrite_wbc+0x151/0x1b0
 file_write_and_wait_range+0x1c9/0x2b0
 ext4_sync_file+0x19e/0xa00
 vfs_fsync_range+0x17b/0x190
 ext4_buffered_write_iter+0x488/0x530
 ext4_file_write_iter+0x449/0x1b90
 vfs_write+0xbcd/0xf40
 ksys_write+0x198/0x2c0
 __x64_sys_write+0x7b/0x90
 do_syscall_64+0x3d/0x90
 entry_SYSCALL_64_after_hwframe+0x63/0xcd
 </TASK>

Fix the problem by clearing EXT4_STATE_MAY_INLINE_DATA when we are doing
direct IO write to a file.

Cc: stable@kernel.org
Reported-by: Tadeusz Struk <tadeusz.struk@linaro.org>
Reported-by: syzbot+bd13648a53ed6933ca49@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?id=a1e89d09bbbcbd5c4cb45db230ee28c822953984
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Tested-by: Tadeusz Struk<tadeusz.struk@linaro.org>
Link: https://lore.kernel.org/r/20220727155753.13969-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

jbd2: add miss release buffer head in fc_do_one_pass()

commit dfff66f30f66b9524b661f311bbed8ff3d2ca49f upstream.

In fc_do_one_pass() miss release buffer head after use which will lead
to reference count leak.

Cc: stable@kernel.org
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220917093805.1782845-1-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

jbd2: fix potential use-after-free in jbd2_fc_wait_bufs

commit 243d1a5d505d0b0460c9af0ad56ed4a56ef0bebd upstream.

In 'jbd2_fc_wait_bufs' use 'bh' after put buffer head reference count
which may lead to use-after-free.
So judge buffer if uptodate before put buffer head reference count.

Cc: stable@kernel.org
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220914100812.1414768-3-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

jbd2: fix potential buffer head reference count leak

commit e0d5fc7a6d80ac2406c7dfc6bb625201d0250a8a upstream.

As in 'jbd2_fc_wait_bufs' if buffer isn't uptodate, will return -EIO without
update 'journal->j_fc_off'. But 'jbd2_fc_release_bufs' will release buffer head
from ‘j_fc_off - 1’ if 'bh' is NULL will terminal release which will lead to
buffer head buffer head reference count leak.
To solve above issue, update 'journal->j_fc_off' before return -EIO.

Cc: stable@kernel.org
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220914100812.1414768-2-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

jbd2: wake up journal waiters in FIFO order, not LIFO

commit 34fc8768ec6089565d6d73bad26724083cecf7bd upstream.

LIFO wakeup order is unfair and sometimes leads to a journal
user not being able to get a journal handle for hundreds of
transactions in a row.

FIFO wakeup can make things more fair.

Cc: stable@kernel.org
Signed-off-by: Alexey Lyashkov <alexey.lyashkov@gmail.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220907165959.1137482-1-alexey.lyashkov@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hardening: Remove Clang's enable flag for -ftrivial-auto-var-init=zero

commit 607e57c6c62c00965ae276902c166834ce73014a upstream.

Now that Clang's -enable-trivial-auto-var-init-zero-knowing-it-will-be-removed-from-clang
option is no longer required, remove it from the command line. Clang 16
and later will warn when it is used, which will cause Kconfig to think
it can't use -ftrivial-auto-var-init=zero at all. Check for whether it
is required and only use it when so.

Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: linux-kbuild@vger.kernel.org
Cc: llvm@lists.linux.dev
Cc: stable@vger.kernel.org
Fixes: f02003c860d9 ("hardening: Avoid harmless Clang option under CONFIG_INIT_STACK_ALL_ZERO")
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hardening: Avoid harmless Clang option under CONFIG_INIT_STACK_ALL_ZERO

commit f02003c860d921171be4a27e2893766eb3bc6871 upstream.

Currently under Clang, CC_HAS_AUTO_VAR_INIT_ZERO requires an extra
-enable flag compared to CC_HAS_AUTO_VAR_INIT_PATTERN. GCC 12[1] will
not, and will happily ignore the Clang-specific flag. However, its
presence on the command-line is both cumbersome and confusing. Due to
GCC's tolerant behavior, though, we can continue to use a single Kconfig
cc-option test for the feature on both compilers, but then drop the
Clang-specific option in the Makefile.

In other words, this patch does not change anything other than making the
compiler command line shorter once GCC supports -ftrivial-auto-var-init=zero.

[1] https://gcc.gnu.org/git/?p=gcc.git;a=commitdiff;h=a25e0b5e6ac8a77a71c229e0a7b744603365b0e9

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: llvm@lists.linux.dev
Fixes: dcb7c0b9461c ("hardening: Clarify Kconfig text for auto-var-init")
Suggested-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/lkml/20210914102837.6172-1-will@kernel.org/
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hardening: Clarify Kconfig text for auto-var-init

commit dcb7c0b9461c2a30f6616262736daac6f01ecb09 upstream.

Clarify the details around the automatic variable initialization modes
available. Specifically this details the values used for pattern init
and expands on the rationale for zero init safety. Additionally makes
zero init the default when available.

Cc: glider@google.com
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: linux-security-module@vger.kernel.org
Cc: clang-built-linux@googlegroups.com
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

f2fs: fix to do sanity check on summary info

commit c6ad7fd16657ebd34a87a97d9588195aae87597d upstream.

As Wenqing Liu reported in bugzilla:

https://bugzilla.kernel.org/show_bug.cgi?id=216456

BUG: KASAN: use-after-free in recover_data+0x63ae/0x6ae0 [f2fs]
Read of size 4 at addr ffff8881464dcd80 by task mount/1013

CPU: 3 PID: 1013 Comm: mount Tainted: G        W          6.0.0-rc4 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014
Call Trace:
 dump_stack_lvl+0x45/0x5e
 print_report.cold+0xf3/0x68d
 kasan_report+0xa8/0x130
 recover_data+0x63ae/0x6ae0 [f2fs]
 f2fs_recover_fsync_data+0x120d/0x1fc0 [f2fs]
 f2fs_fill_super+0x4665/0x61e0 [f2fs]
 mount_bdev+0x2cf/0x3b0
 legacy_get_tree+0xed/0x1d0
 vfs_get_tree+0x81/0x2b0
 path_mount+0x47e/0x19d0
 do_mount+0xce/0xf0
 __x64_sys_mount+0x12c/0x1a0
 do_syscall_64+0x38/0x90
 entry_SYSCALL_64_after_hwframe+0x63/0xcd

The root cause is: in fuzzed image, SSA table is corrupted: ofs_in_node
is larger than ADDRS_PER_PAGE(), result in out-of-range access on 4k-size
page.

- recover_data
 - do_recover_data
  - check_index_in_prev_nodes
   - f2fs_data_blkaddr

This patch adds sanity check on summary info in recovery and GC flow
in where the flows rely on them.

After patch:
[   29.310883] F2FS-fs (loop0): Inconsistent ofs_in_node:65286 in summary, ino:0, nid:6, max:1018

Cc: stable@vger.kernel.org
Reported-by: Wenqing Liu <wenqingliu0120@gmail.com>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

f2fs: fix to do sanity check on destination blkaddr during recovery

commit 0ef4ca04a3f9223ff8bc440041c524b2123e09a3 upstream.

As Wenqing Liu reported in bugzilla:

https://bugzilla.kernel.org/show_bug.cgi?id=216456

loop5: detected capacity change from 0 to 131072
F2FS-fs (loop5): recover_inode: ino = 6, name = hln, inline = 1
F2FS-fs (loop5): recover_data: ino = 6 (i_size: recover) err = 0
F2FS-fs (loop5): recover_inode: ino = 6, name = hln, inline = 1
F2FS-fs (loop5): recover_data: ino = 6 (i_size: recover) err = 0
F2FS-fs (loop5): recover_inode: ino = 6, name = hln, inline = 1
F2FS-fs (loop5): recover_data: ino = 6 (i_size: recover) err = 0
F2FS-fs (loop5): Bitmap was wrongly set, blk:5634
------------[ cut here ]------------
WARNING: CPU: 3 PID: 1013 at fs/f2fs/segment.c:2198
RIP: 0010:update_sit_entry+0xa55/0x10b0 [f2fs]
Call Trace:
 <TASK>
 f2fs_do_replace_block+0xa98/0x1890 [f2fs]
 f2fs_replace_block+0xeb/0x180 [f2fs]
 recover_data+0x1a69/0x6ae0 [f2fs]
 f2fs_recover_fsync_data+0x120d/0x1fc0 [f2fs]
 f2fs_fill_super+0x4665/0x61e0 [f2fs]
 mount_bdev+0x2cf/0x3b0
 legacy_get_tree+0xed/0x1d0
 vfs_get_tree+0x81/0x2b0
 path_mount+0x47e/0x19d0
 do_mount+0xce/0xf0
 __x64_sys_mount+0x12c/0x1a0
 do_syscall_64+0x38/0x90
 entry_SYSCALL_64_after_hwframe+0x63/0xcd

If we enable CONFIG_F2FS_CHECK_FS config, it will trigger a kernel panic
instead of warning.

The root cause is: in fuzzed image, SIT table is inconsistent with inode
mapping table, result in triggering such warning during SIT table update.

This patch introduces a new flag DATA_GENERIC_ENHANCE_UPDATE, w/ this
flag, data block recovery flow can check destination blkaddr's validation
in SIT table, and skip f2fs_replace_block() to avoid inconsistent status.

Cc: stable@vger.kernel.org
Reported-by: Wenqing Liu <wenqingliu0120@gmail.com>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

f2fs: increase the limit for reserve_root

commit da35fe96d12d15779f3cb74929b7ed03941cf983 upstream.

This patch increases the threshold that limits the reserved root space from 0.2%
to 12.5% by using simple shift operation.

Typically Android sets 128MB, but if the storage capacity is 32GB, 0.2% which is
around 64MB becomes too small. Let's relax it.

Cc: stable@vger.kernel.org
Reported-by: Aran Dalton <arda@allwinnertech.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: fix race between quota enable and quota rescan ioctl

commit 331cd9461412e103d07595a10289de90004ac890 upstream.

When enabling quotas, at btrfs_quota_enable(), after committing the
transaction, we change fs_info->quota_root to point to the quota root we
created and set BTRFS_FS_QUOTA_ENABLED at fs_info->flags. Then we try
to start the qgroup rescan worker, first by initializing it with a call
to qgroup_rescan_init() - however if that fails we end up freeing the
quota root but we leave fs_info->quota_root still pointing to it, this
can later result in a use-after-free somewhere else.

We have previously set the flags BTRFS_FS_QUOTA_ENABLED and
BTRFS_QGROUP_STATUS_FLAG_ON, so we can only fail with -EINPROGRESS at
btrfs_quota_enable(), which is possible if someone already called the
quota rescan ioctl, and therefore started the rescan worker.

So fix this by ignoring an -EINPROGRESS and asserting we can't get any
other error.

Reported-by: Ye Bin <yebin10@huawei.com>
Link: https://lore.kernel.org/linux-btrfs/20220823015931.421355-1-yebin10@huawei.com/
CC: stable@vger.kernel.org # 4.19+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fbdev: smscufx: Fix use-after-free in ufx_ops_open()

commit 5610bcfe8693c02e2e4c8b31427f1bdbdecc839c upstream.

A race condition may occur if the user physically removes the
USB device while calling open() for this device node.

This is a race condition between the ufx_ops_open() function and
the ufx_usb_disconnect() function, which may eventually result in UAF.

So, add a mutex to the ufx_ops_open() and ufx_usb_disconnect() functions
to avoid race contidion of krefs.

Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: qedf: Populate sysfs attributes for vport

commit 592642e6b11e620e4b43189f8072752429fc8dc3 upstream.

Few vport parameters were displayed by systool as 'Unknown' or 'NULL'.
Copy speed, supported_speed, frame_size and update port_type for NPIV port.

Link: https://lore.kernel.org/r/20220919134434.3513-1-njavali@marvell.com
Cc: stable@vger.kernel.org
Tested-by: Guangwu Zhang <guazhang@redhat.com>
Reviewed-by: John Meneghini <jmeneghi@redhat.com>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/boot: Explicitly disable usage of SPE instructions

commit 110a58b9f91c66f743c01a2c217243d94c899c23 upstream.

uImage boot wrapper should not use SPE instructions, like kernel itself.
Boot wrapper has already disabled Altivec and VSX instructions but not SPE.
Options -mno-spe and -mspe=no already set when compilation of kernel, but
not when compiling uImage wrapper yet. Fix it.

Cc: stable@vger.kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220827134454.17365-1-pali@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powercap: intel_rapl: Use standard Energy Unit for SPR Dram RAPL domain

commit 4c081324df5608b73428662ca54d5221ea03a6bd upstream.

Intel Xeon servers used to use a fixed energy resolution (15.3uj) for
Dram RAPL domain. But on SPR, Dram RAPL domain follows the standard
energy resolution as described in MSR_RAPL_POWER_UNIT.

Remove the SPR dram_domain_energy_unit quirk.

Fixes: 2d798d9f5967 ("powercap: intel_rapl: add support for Sapphire Rapids")
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: Wang Wendy <wendy.wang@intel.com>
Cc: 5.9+ <stable@vger.kernel.org> # 5.9+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: Sanitise firmware BAR assignments behind a PCI-PCI bridge

commit 0e32818397426a688f598f35d3bc762eca6d7592 upstream.

When pci_assign_resource() is unable to assign resources to a BAR, it uses
pci_revert_fw_address() to fall back to a firmware assignment (if any).
Previously pci_revert_fw_address() assumed all addresses could reach the
device, but this is not true if the device is below a bridge that only
forwards addresses within its windows.

This problem was observed on a Tyan Tomcat IV S1564D system where the BIOS
did not assign valid addresses to several bridges and USB devices:

  pci 0000:00:11.0: PCI-to-PCIe bridge to [bus 01-ff]
  pci 0000:00:11.0:   bridge window [io  0xe000-0xefff]
  pci 0000:01:00.0: PCIe Upstream Port to [bus 02-ff]
  pci 0000:01:00.0:   bridge window [io  0x0000-0x0fff]   # unreachable
  pci 0000:02:02.0: PCIe Downstream Port to [bus 05-ff]
  pci 0000:02:02.0:   bridge window [io  0x0000-0x0fff]   # unreachable
  pci 0000:05:00.0: PCIe-to-PCI bridge to [bus 06-ff]
  pci 0000:05:00.0:   bridge window [io  0x0000-0x0fff]   # unreachable
  pci 0000:06:08.0: USB UHCI 1.1
  pci 0000:06:08.0: BAR 4: [io  0xfce0-0xfcff]            # unreachable
  pci 0000:06:08.1: USB UHCI 1.1
  pci 0000:06:08.1: BAR 4: [io  0xfce0-0xfcff]            # unreachable
  pci 0000:06:08.0: can't claim BAR 4 [io  0xfce0-0xfcff]: no compatible bridge window
  pci 0000:06:08.1: can't claim BAR 4 [io  0xfce0-0xfcff]: no compatible bridge window

During the first pass of assigning unassigned resources, there was not
enough I/O space available, so we couldn't assign the 06:08.0 BAR and
reverted to the firmware assignment (still unreachable).  Reverting the
06:08.1 assignment failed because it conflicted with 06:08.0:

  pci 0000:00:11.0:   bridge window [io  0xe000-0xefff]
  pci 0000:01:00.0: no space for bridge window [io  size 0x2000]
  pci 0000:02:02.0: no space for bridge window [io  size 0x1000]
  pci 0000:05:00.0: no space for bridge window [io  size 0x1000]
  pci 0000:06:08.0: BAR 4: no space for [io  size 0x0020]
  pci 0000:06:08.0: BAR 4: trying firmware assignment [io  0xfce0-0xfcff]
  pci 0000:06:08.1: BAR 4: no space for [io  size 0x0020]
  pci 0000:06:08.1: BAR 4: trying firmware assignment [io  0xfce0-0xfcff]
  pci 0000:06:08.1: BAR 4: [io  0xfce0-0xfcff] conflicts with 0000:06:08.0 [io  0xfce0-0xfcff]

A subsequent pass assigned valid bridge windows and a valid 06:08.1 BAR,
but left the 06:08.0 BAR alone, so the UHCI device was still unusable:

  pci 0000:00:11.0:   bridge window [io  0xe000-0xefff] released
  pci 0000:00:11.0:   bridge window [io  0x1000-0x2fff]   # reassigned
  pci 0000:01:00.0:   bridge window [io  0x1000-0x2fff]   # reassigned
  pci 0000:02:02.0:   bridge window [io  0x2000-0x2fff]   # reassigned
  pci 0000:05:00.0:   bridge window [io  0x2000-0x2fff]   # reassigned
  pci 0000:06:08.0: BAR 4: assigned [io  0xfce0-0xfcff]   # left alone
  pci 0000:06:08.1: BAR 4: assigned [io  0x2000-0x201f]
  ...
  uhci_hcd 0000:06:08.0: host system error, PCI problems?
  uhci_hcd 0000:06:08.0: host controller process error, something bad happened!
  uhci_hcd 0000:06:08.0: host controller halted, very bad!
  uhci_hcd 0000:06:08.0: HCRESET not completed yet!
  uhci_hcd 0000:06:08.0: HC died; cleaning up

If the address assigned by firmware is not reachable because it's not
within upstream bridge windows, fail instead of assigning the unusable
address from firmware.

[bhelgaas: commit log, use pci_upstream_bridge()]
Link: https://bugzilla.kernel.org/show_bug.cgi?id=16263
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2203012338460.46819@angie.orcam.me.uk
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2209211921250.29493@angie.orcam.me.uk
Fixes: 58c84eda0756 ("PCI: fall back to original BIOS BAR addresses")
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org # v2.6.35+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/mmap: undo ->mmap() when arch_validate_flags() fails

commit deb0f6562884b5b4beb883d73e66a7d3a1b96d99 upstream.

Commit c462ac288f2c ("mm: Introduce arch_validate_flags()") added a late
check in mmap_region() to let architectures validate vm_flags.  The check
needs to happen after calling ->mmap() as the flags can potentially be
modified during this callback.

If arch_validate_flags() check fails we unmap and free the vma.  However,
the error path fails to undo the ->mmap() call that previously succeeded
and depending on the specific ->mmap() implementation this translates to
reference increments, memory allocations and other operations what will
not be cleaned up.

There are several places (mainly device drivers) where this is an issue.
However, one specific example is bpf_map_mmap() which keeps count of the
mappings in map->writecnt.  The count is incremented on ->mmap() and then
decremented on vm_ops->close().  When arch_validate_flags() fails this
count is off since bpf_map_mmap_close() is never called.

One can reproduce this issue in arm64 devices with MTE support.  Here the
vm_flags are checked to only allow VM_MTE if VM_MTE_ALLOWED has been set
previously.  From userspace then is enough to pass the PROT_MTE flag to
mmap() syscall to trigger the arch_validate_flags() failure.

The following program reproduces this issue:

  #include <stdio.h>
  #include <unistd.h>
  #include <linux/unistd.h>
  #include <linux/bpf.h>
  #include <sys/mman.h>

  int main(void)
  {
union bpf_attr attr = {
.map_type = BPF_MAP_TYPE_ARRAY,
.key_size = sizeof(int),
.value_size = sizeof(long long),
.max_entries = 256,
.map_flags = BPF_F_MMAPABLE,
};
int fd;

fd = syscall(__NR_bpf, BPF_MAP_CREATE, &attr, sizeof(attr));
mmap(NULL, 4096, PROT_WRITE | PROT_MTE, MAP_SHARED, fd, 0);

return 0;
  }

By manually adding some log statements to the vm_ops callbacks we can
confirm that when passing PROT_MTE to mmap() the map->writecnt is off upon
->release():

With PROT_MTE flag:
  root@debian:~# ./bpf-test
  [  111.263874] bpf_map_write_active_inc: map=9 writecnt=1
  [  111.288763] bpf_map_release: map=9 writecnt=1

Without PROT_MTE flag:
  root@debian:~# ./bpf-test
  [  157.816912] bpf_map_write_active_inc: map=10 writecnt=1
  [  157.830442] bpf_map_write_active_dec: map=10 writecnt=0
  [  157.832396] bpf_map_release: map=10 writecnt=0

This patch fixes the above issue by calling vm_ops->close() when the
arch_validate_flags() check fails, after this we can proceed to unmap and
free the vma on the error path.

Link: https://lkml.kernel.org/r/20220930003844.1210987-1-cmllamas@google.com
Fixes: c462ac288f2c ("mm: Introduce arch_validate_flags()")
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Liam Howlett <liam.howlett@oracle.com>
Cc: Christian Brauner (Microsoft) <brauner@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: <stable@vger.kernel.org> [5.10+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

block: fix inflight statistics of part0

commit b0d97557ebfc9d5ba5f2939339a9fdd267abafeb upstream.

The inflight of partition 0 doesn't include inflight IOs to all
sub-partitions, since currently mq calculates inflight of specific
partition by simply camparing the value of the partition pointer.

Thus the following case is possible:

$ cat /sys/block/vda/inflight
       0        0
$ cat /sys/block/vda/vda1/inflight
       0      128

While single queue device (on a previous version, e.g. v3.10) has no
this issue:

$cat /sys/block/sda/sda3/inflight
       0       33
$cat /sys/block/sda/inflight
       0       33

Partition 0 should be specially handled since it represents the whole
disk. This issue is introduced since commit bf0ddaba65dd ("blk-mq: fix
sysfs inflight counter").

Besides, this patch can also fix the inflight statistics of part 0 in
/proc/diskstats. Before this patch, the inflight statistics of part 0
doesn't include that of sub partitions. (I have marked the 'inflight'
field with asterisk.)

$cat /proc/diskstats
 259       0 nvme0n1 45974469 0 367814768 6445794 1 0 1 0 *0* 111062 6445794 0 0 0 0 0 0
 259       2 nvme0n1p1 45974058 0 367797952 6445727 0 0 0 0 *33* 111001 6445727 0 0 0 0 0 0

This is introduced since commit f299b7c7a9de ("blk-mq: provide internal
in-flight variant").

Fixes: bf0ddaba65dd ("blk-mq: fix sysfs inflight counter")
Fixes: f299b7c7a9de ("blk-mq: provide internal in-flight variant")
Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
[axboe: adapt for 5.11 partition change]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
[khazhy: adapt for 5.10 partition]
Signed-off-by: Khazhismel Kumykov <khazhy@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/udl: Restore display mode on resume

commit 6d6e732835db92e66c28dbcf258a7e3d3c71420d upstream.

Restore the display mode whne resuming from suspend. Currently, the
display remains dark.

On resume, the CRTC's mode does not change, but the 'active' flag
changes to 'true'. Taking this into account when considering a mode
switch restores the display mode.

The bug is reproducable by using Gnome with udl and observing the
adapter's suspend/resume behavior.

Actually, the whole check added in udl_simple_display_pipe_enable()
about the crtc_state->mode_changed was bogus.  We should drop the
whole check and always apply the mode change in this function.

[ tiwai -- Drop the mode_changed check entirely instead, per Daniel's
  suggestion ]

Fixes: 997d33c35618 ("drm/udl: Inline DPMS code into CRTC enable and disable functions")
Cc: <stable@vger.kernel.org>
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220908095115.23396-2-tiwai@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/virtio: Check whether transferred 2D BO is shmem

commit e473216b42aa1fd9fc6b94b608b42c210c655908 upstream.

Transferred 2D BO always must be a shmem BO. Add check for that to prevent
NULL dereference if userspace passes a VRAM BO.

Cc: stable@vger.kernel.org
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20220630200726.1884320-3-dmitry.osipenko@collabora.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nvme-pci: set min_align_mask before calculating max_hw_sectors

commit 61ce339f19fabbc3e51237148a7ef6f2270e44fa upstream.

If swiotlb is force enabled dma_max_mapping_size ends up calling
swiotlb_max_mapping_size which takes into account the min align mask for
the device.  Set the min align mask for nvme driver before calling
dma_max_mapping_size while calculating max hw sectors.

Signed-off-by: Rishabh Bhatnagar <risbhat@amazon.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

UM: cpuinfo: Fix a warning for CONFIG_CPUMASK_OFFSTACK

commit 16c546e148fa6d14a019431436a6f7b4087dbccd upstream.

When CONFIG_CPUMASK_OFFSTACK and CONFIG_DEBUG_PER_CPU_MAPS is selected,
cpu_max_bits_warn() generates a runtime warning similar as below while
we show /proc/cpuinfo. Fix this by using nr_cpu_ids (the runtime limit)
instead of NR_CPUS to iterate CPUs.

[    3.052463] ------------[ cut here ]------------
[    3.059679] WARNING: CPU: 3 PID: 1 at include/linux/cpumask.h:108 show_cpuinfo+0x5e8/0x5f0
[    3.070072] Modules linked in: efivarfs autofs4
[    3.076257] CPU: 0 PID: 1 Comm: systemd Not tainted 5.19-rc5+ #1052
[    3.099465] Stack : 9000000100157b08 9000000000f18530 9000000000cf846c 9000000100154000
[    3.109127]         9000000100157a50 0000000000000000 9000000100157a58 9000000000ef7430
[    3.118774]         90000001001578e8 0000000000000040 0000000000000020 ffffffffffffffff
[    3.128412]         0000000000aaaaaa 1ab25f00eec96a37 900000010021de80 900000000101c890
[    3.138056]         0000000000000000 0000000000000000 0000000000000000 0000000000aaaaaa
[    3.147711]         ffff8000339dc220 0000000000000001 0000000006ab4000 0000000000000000
[    3.157364]         900000000101c998 0000000000000004 9000000000ef7430 0000000000000000
[    3.167012]         0000000000000009 000000000000006c 0000000000000000 0000000000000000
[    3.176641]         9000000000d3de08 9000000001639390 90000000002086d8 00007ffff0080286
[    3.186260]         00000000000000b0 0000000000000004 0000000000000000 0000000000071c1c
[    3.195868]         ...
[    3.199917] Call Trace:
[    3.203941] [<90000000002086d8>] show_stack+0x38/0x14c
[    3.210666] [<9000000000cf846c>] dump_stack_lvl+0x60/0x88
[    3.217625] [<900000000023d268>] __warn+0xd0/0x100
[    3.223958] [<9000000000cf3c90>] warn_slowpath_fmt+0x7c/0xcc
[    3.231150] [<9000000000210220>] show_cpuinfo+0x5e8/0x5f0
[    3.238080] [<90000000004f578c>] seq_read_iter+0x354/0x4b4
[    3.245098] [<90000000004c2e90>] new_sync_read+0x17c/0x1c4
[    3.252114] [<90000000004c5174>] vfs_read+0x138/0x1d0
[    3.258694] [<90000000004c55f8>] ksys_read+0x70/0x100
[    3.265265] [<9000000000cfde9c>] do_syscall+0x7c/0x94
[    3.271820] [<9000000000202fe4>] handle_syscall+0xc4/0x160
[    3.281824] ---[ end trace 8b484262b4b8c24c ]---

Cc: stable@vger.kernel.org
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

riscv: Pass -mno-relax only on lld < 15.0.0

commit 3cebf80e9a0d3adcb174053be32c88a640b3344b upstream.

lld since llvm:6611d58f5bbc ("[ELF] Relax R_RISCV_ALIGN"), which will be
included in the 15.0.0 release, has implemented some RISC-V linker
relaxation.  -mno-relax is no longer needed in
KBUILD_CFLAGS/KBUILD_AFLAGS to suppress R_RISCV_ALIGN which older lld
can not handle:

    ld.lld: error: capability.c:(.fixup+0x0): relocation R_RISCV_ALIGN
    requires unimplemented linker relaxation; recompile with -mno-relax
    but the .o is already compiled with -mno-relax

Signed-off-by: Fangrui Song <maskray@google.com>
Link: https://lore.kernel.org/r/20220710071117.446112-1-maskray@google.com/
Link: https://lore.kernel.org/r/20220918092933.19943-1-palmer@rivosinc.com
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

riscv: Make VM_WRITE imply VM_READ

commit 7ab72c597356be1e7f0f3d856e54ce78527f43c8 upstream.

RISC-V does not presently have write-only mappings as that PTE bit pattern
is considered reserved in the privileged spec, so allow handling of read
faults in VMAs that have VM_WRITE without VM_READ in order to be consistent
with other architectures that have similar limitations.

Fixes: 2139619bcad7 ("riscv: mmap with PROT_WRITE but no PROT_READ is invalid")
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Andrew Bresticker <abrestic@rivosinc.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220915193702.2201018-2-abrestic@rivosinc.com/
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

riscv: Allow PROT_WRITE-only mmap()

commit 9e2e6042a7ec6504fe8e366717afa2f40cf16488 upstream.

Commit 2139619bcad7 ("riscv: mmap with PROT_WRITE but no PROT_READ is
invalid") made mmap() return EINVAL if PROT_WRITE was set wihtout
PROT_READ with the justification that a write-only PTE is considered a
reserved PTE permission bit pattern in the privileged spec. This check
is unnecessary since we let VM_WRITE imply VM_READ on RISC-V, and it is
inconsistent with other architectures that don't support write-only PTEs,
creating a potential software portability issue. Just remove the check
altogether and let PROT_WRITE imply PROT_READ as is the case on other
architectures.

Note that this also allows PROT_WRITE|PROT_EXEC mappings which were
disallowed prior to the aforementioned commit; PROT_READ is implied in
such mappings as well.

Fixes: 2139619bcad7 ("riscv: mmap with PROT_WRITE but no PROT_READ is invalid")
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Andrew Bresticker <abrestic@rivosinc.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220915193702.2201018-3-abrestic@rivosinc.com/
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc: fbdev/stifb: Align graphics memory size to 4MB

commit aca7c13d3bee81a968337a5515411409ae9d095d upstream.

Independend of the current graphics resolution, adjust the reported
graphics card memory size to the next 4MB boundary.
This fixes the fbtest program which expects a naturally aligned size.

Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

RISC-V: Make port I/O string accessors actually work

commit 9cc205e3c17d5716da7ebb7fa0c985555e95d009 upstream.

Fix port I/O string accessors such as `insb', `outsb', etc. which use
the physical PCI port I/O address rather than the corresponding memory
mapping to get at the requested location, which in turn breaks at least
accesses made by our parport driver to a PCIe parallel port such as:

PCI parallel port detected: 1415:c118, I/O at 0x1000(0x1008), IRQ 20
parport0: PC-style at 0x1000 (0x1008), irq 20, using FIFO [PCSPP,TRISTATE,COMPAT,EPP,ECP]

causing a memory access fault:

Unable to handle kernel access to user memory without uaccess routines at virtual address 0000000000001008
Oops [#1]
Modules linked in:
CPU: 1 PID: 350 Comm: cat Not tainted 6.0.0-rc2-00283-g10d4879f9ef0-dirty #23
Hardware name: SiFive HiFive Unmatched A00 (DT)
epc : parport_pc_fifo_write_block_pio+0x266/0x416
 ra : parport_pc_fifo_write_block_pio+0xb4/0x416
epc : ffffffff80542c3e ra : ffffffff80542a8c sp : ffffffd88899fc60
 gp : ffffffff80fa2700 tp : ffffffd882b1e900 t0 : ffffffd883d0b000
 t1 : ffffffffff000002 t2 : 4646393043330a38 s0 : ffffffd88899fcf0
 s1 : 0000000000001000 a0 : 0000000000000010 a1 : 0000000000000000
 a2 : ffffffd883d0a010 a3 : 0000000000000023 a4 : 00000000ffff8fbb
 a5 : ffffffd883d0a001 a6 : 0000000100000000 a7 : ffffffc800000000
 s2 : ffffffffff000002 s3 : ffffffff80d28880 s4 : ffffffff80fa1f50
 s5 : 0000000000001008 s6 : 0000000000000008 s7 : ffffffd883d0a000
 s8 : 0004000000000000 s9 : ffffffff80dc1d80 s10: ffffffd8807e4000
 s11: 0000000000000000 t3 : 00000000000000ff t4 : 393044410a303930
 t5 : 0000000000001000 t6 : 0000000000040000
status: 0000000200000120 badaddr: 0000000000001008 cause: 000000000000000f
[<ffffffff80543212>] parport_pc_compat_write_block_pio+0xfe/0x200
[<ffffffff8053bbc0>] parport_write+0x46/0xf8
[<ffffffff8050530e>] lp_write+0x158/0x2d2
[<ffffffff80185716>] vfs_write+0x8e/0x2c2
[<ffffffff80185a74>] ksys_write+0x52/0xc2
[<ffffffff80185af2>] sys_write+0xe/0x16
[<ffffffff80003770>] ret_from_syscall+0x0/0x2
---[ end trace 0000000000000000 ]---

For simplicity address the problem by adding PCI_IOBASE to the physical
address requested in the respective wrapper macros only, observing that
the raw accessors such as `__insb', `__outsb', etc. are not supposed to
be used other than by said macros.  Remove the cast to `long' that is no
longer needed on `addr' now that it is used as an offset from PCI_IOBASE
and add parentheses around `addr' needed for predictable evaluation in
macro expansion.  No need to make said adjustments in separate changes
given that current code is gravely broken and does not ever work.

Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Fixes: fab957c11efe2 ("RISC-V: Atomic and Locking Code")
Cc: stable@vger.kernel.org # v4.15+
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2209220223080.29493@angie.orcam.me.uk
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

regulator: qcom_rpm: Fix circular deferral regression

commit 8478ed5844588703a1a4c96a004b1525fbdbdd5e upstream.

On recent kernels, the PM8058 L16 (or any other PM8058 LDO-regulator)
does not come up if they are supplied by an SMPS-regulator. This
is not very strange since the regulators are registered in a long
array and the L-regulators are registered before the S-regulators,
and if an L-regulator defers, it will never get around to registering
the S-regulator that it needs.

See arch/arm/boot/dts/qcom-apq8060-dragonboard.dts:

pm8058-regulators {
    (...)
    vdd_l13_l16-supply = <&pm8058_s4>;
    (...)

Ooops.

Fix this by moving the PM8058 S-regulators first in the array.

Do the same for the PM8901 S-regulators (though this is currently
not causing any problems with out device trees) so that the pattern
of registration order is the same on all PMnnnn chips.

Fixes: 087a1b5cdd55 ("regulator: qcom: Rework to single platform device")
Cc: stable@vger.kernel.org
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <andersson@kernel.org>
Cc: Konrad Dybcio <konrad.dybcio@somainline.org>
Cc: linux-arm-msm@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20220909112529.239143-1-linus.walleij@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hwmon: (gsc-hwmon) Call of_node_get() before of_find_xxx API

commit 7f62cf781e6567d59c8935dc8c6068ce2bb904b7 upstream.

In gsc_hwmon_get_devtree_pdata(), we should call of_node_get() before
the of_find_compatible_node() which will automatically call
of_node_put() for the 'from' argument.

Fixes: 3bce5377ef66 ("hwmon: Add Gateworks System Controller support")
Signed-off-by: Liang He <windhl@126.com>
Co-developed-by: Mengda Chen <chenmengda2009@163.com>
Signed-off-by: Mengda Chen <chenmengda2009@163.com>
Link: https://lore.kernel.org/r/20220916154708.3084515-1-chenmengda2009@163.com
Cc: stable@vger.kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: wcd934x: fix order of Slimbus unprepare/disable

commit e96bca7eaa5747633ec638b065630ff83728982a upstream.

Slimbus streams are first prepared and then enabled, so the cleanup path
should reverse it.  The unprepare sets stream->num_ports to 0 and frees
the stream->ports.  Calling disable after unprepare was not really
effective (channels was not deactivated) and could lead to further
issues due to making transfers on unprepared stream.

Fixes: a61f3b4f476e ("ASoC: wcd934x: add support to wcd9340/wcd9341 codec")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220921145354.1683791-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: wcd9335: fix order of Slimbus unprepare/disable

commit ea8ef003aa53ad23e7705c5cab1c4e664faa6c79 upstream.

Slimbus streams are first prepared and then enabled, so the cleanup path
should reverse it.  The unprepare sets stream->num_ports to 0 and frees
the stream->ports.  Calling disable after unprepare was not really
effective (channels was not deactivated) and could lead to further
issues due to making transfers on unprepared stream.

Fixes: 20aedafdf492 ("ASoC: wcd9335: add support to wcd9335 codec")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220921145354.1683791-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

platform/chrome: cros_ec_proto: Update version on GET_NEXT_EVENT failure

commit f74c7557ed0d321947e8bb4e9d47c1013f8b2227 upstream.

Some EC based devices (e.g. Fingerpint MCU) can jump to RO part of the
firmware (intentionally or due to device reboot). The RO part doesn't
change during the device lifecycle, so it won't support newer version
of EC_CMD_GET_NEXT_EVENT command.

Function cros_ec_query_all() is responsible for finding maximum
supported MKBP event version. It's usually called when the device is
running RW part of the firmware, so the command version can be
potentially higher than version supported by the RO.

The problem was fixed by updating maximum supported version when the
device returns EC_RES_INVALID_VERSION (mapped to -ENOPROTOOPT). That way
the kernel will use highest common version supported by RO and RW.

Fixes: 3300fdd630d4 ("platform/chrome: cros_ec: handle MKBP more events flag")
Cc: <stable@vger.kernel.org> # 5.10+
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Patryk Duda <pdk@semihalf.com>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220802154128.21175-1-pdk@semihalf.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

quota: Check next/prev free block number after reading from quota file

commit 6c8ea8b8cd4722efd419f91ca46a2dc81b7d89a3 upstream.

Following process:
 Init: v2_read_file_info: <3> dqi_free_blk 0 dqi_free_entry 5 dqi_blks 6

 Step 1. chown bin f_a -> dquot_acquire -> v2_write_dquot:
  qtree_write_dquot
   do_insert_tree
    find_free_dqentry
     get_free_dqblk
      write_blk(info->dqi_blocks) // info->dqi_blocks = 6, failure. The
   content in physical block (corresponding to blk 6) is random.

 Step 2. chown root f_a -> dquot_transfer -> dqput_all -> dqput ->
         ext4_release_dquot -> v2_release_dquot -> qtree_delete_dquot:
  dquot_release
   remove_tree
    free_dqentry
     put_free_dqblk(6)
      info->dqi_free_blk = blk    // info->dqi_free_blk = 6

 Step 3. drop cache (buffer head for block 6 is released)

 Step 4. chown bin f_b -> dquot_acquire -> commit_dqblk -> v2_write_dquot:
  qtree_write_dquot
   do_insert_tree
    find_free_dqentry
     get_free_dqblk
      dh = (struct qt_disk_dqdbheader *)buf
      blk = info->dqi_free_blk     // 6
      ret = read_blk(info, blk, buf)  // The content of buf is random
      info->dqi_free_blk = le32_to_cpu(dh->dqdh_next_free)  // random blk

 Step 5. chown bin f_c -> notify_change -> ext4_setattr -> dquot_transfer:
  dquot = dqget -> acquire_dquot -> ext4_acquire_dquot -> dquot_acquire ->
          commit_dqblk -> v2_write_dquot -> dq_insert_tree:
   do_insert_tree
    find_free_dqentry
     get_free_dqblk
      blk = info->dqi_free_blk    // If blk < 0 and blk is not an error
     code, it will be returned as dquot

  transfer_to[USRQUOTA] = dquot  // A random negative value
  __dquot_transfer(transfer_to)
   dquot_add_inodes(transfer_to[cnt])
    spin_lock(&dquot->dq_dqb_lock)  // page fault

, which will lead to kernel page fault:
 Quota error (device sda): qtree_write_dquot: Error -8000 occurred
 while creating quota
 BUG: unable to handle page fault for address: ffffffffffffe120
 #PF: supervisor write access in kernel mode
 #PF: error_code(0x0002) - not-present page
 Oops: 0002 [#1] PREEMPT SMP
 CPU: 0 PID: 5974 Comm: chown Not tainted 6.0.0-rc1-00004
 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
 RIP: 0010:_raw_spin_lock+0x3a/0x90
 Call Trace:
  dquot_add_inodes+0x28/0x270
  __dquot_transfer+0x377/0x840
  dquot_transfer+0xde/0x540
  ext4_setattr+0x405/0x14d0
  notify_change+0x68e/0x9f0
  chown_common+0x300/0x430
  __x64_sys_fchownat+0x29/0x40

In order to avoid accessing invalid quota memory address, this patch adds
block number checking of next/prev free block read from quota file.

Fetch a reproducer in [Link].

Link: https://bugzilla.kernel.org/show_bug.cgi?id=216372
Fixes: 1da177e4c3f4152 ("Linux-2.6.12-rc2")
CC: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220923134555.2623931-2-chengzhihao1@huawei.com
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: multitouch: Add memory barriers

commit be6e2b5734a425941fcdcdbd2a9337be498ce2cf upstream.

This fixes broken atomic checks which cause a race between the
release-timer and processing of hid input.

I noticed that contacts were sometimes sticking, even with the "sticky
fingers" quirk enabled. This fixes that problem.

Cc: stable@vger.kernel.org
Fixes: 9609827458c3 ("HID: multitouch: optimize the sticky fingers timer")
Signed-off-by: Andri Yngvason <andri@yngvason.is>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20220907150159.2285460-1-andri@yngvason.is
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fs: dlm: handle -EBUSY first in lock arg validation

commit 44637ca41d551d409a481117b07fa209b330fca9 upstream.

During lock arg validation, first check for -EBUSY cases, then for
-EINVAL cases. The -EINVAL checks look at lkb state variables
which are not stable when an lkb is busy and would cause an
-EBUSY result, e.g. lkb->lkb_grmode.

Cc: stable@vger.kernel.org
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fs: dlm: fix race between test_bit() and queue_work()

commit eef6ec9bf390e836a6c4029f3620fe49528aa1fe upstream.

This patch fixes a race by using ls_cb_mutex around the bit
operations and conditional code blocks for LSFL_CB_DELAY.

The function dlm_callback_stop() expects to stop all callbacks and
flush all currently queued onces. The set_bit() is not enough because
there can still be queue_work() after the workqueue was flushed.
To avoid queue_work() after set_bit(), surround both by ls_cb_mutex.

Cc: stable@vger.kernel.org
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: sdhci-sprd: Fix minimum clock limit

commit 6e141772e6465f937458b35ddcfd0a981b6f5280 upstream.

The Spreadtrum controller supports 100KHz minimal clock rate, which means
that the current value 400KHz is wrong.

Unfortunately this has also lead to fail to initialize some cards, which
are allowed to require 100KHz to work. So, let's fix the problem by
changing the minimal supported clock rate to 100KHz.

Signed-off-by: Wenchao Chen <wenchao.chen@unisoc.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Fixes: fb8bd90f83c4 ("mmc: sdhci-sprd: Add Spreadtrum's initial host controller")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20221011104935.10980-1-wenchao.chen666@gmail.com
[Ulf: Clarified to commit-message]
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: kvaser_usb_leaf: Fix CAN state after restart

commit 0be1a655fe68c8e6dcadbcbddb69cf2fb29881f5 upstream.

can_restart() expects CMD_START_CHIP to set the error state to
ERROR_ACTIVE as it calls netif_carrier_on() immediately afterwards.

Otherwise the user may immediately trigger restart again and hit a
BUG_ON() in can_restart().

Fix kvaser_usb_leaf set_mode(CMD_START_CHIP) to set the expected state.

Cc: stable@vger.kernel.org
Fixes: 080f40a6fa28 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices")
Tested-by: Jimmy Assarsson <extja@kvaser.com>
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://lore.kernel.org/all/20221010150829.199676-5-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: kvaser_usb_leaf: Fix TX queue out of sync after restart

commit 455561fb618fde40558776b5b8435f9420f335db upstream.

The TX queue seems to be implicitly flushed by the hardware during
bus-off or bus-off recovery, but the driver does not reset the TX
bookkeeping.

Despite not resetting TX bookkeeping the driver still re-enables TX
queue unconditionally, leading to "cannot find free context" /
NETDEV_TX_BUSY errors if the TX queue was full at bus-off time.

Fix that by resetting TX bookkeeping on CAN restart.

Tested with 0bfd:0124 Kvaser Mini PCI Express 2xHS FW 4.18.778.

Cc: stable@vger.kernel.org
Fixes: 080f40a6fa28 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices")
Tested-by: Jimmy Assarsson <extja@kvaser.com>
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://lore.kernel.org/all/20221010150829.199676-4-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: kvaser_usb_leaf: Fix overread with an invalid command

commit 1499ecaea9d2ba68d5e18d80573b4561a8dc4ee7 upstream.

For command events read from the device,
kvaser_usb_leaf_read_bulk_callback() verifies that cmd->len does not
exceed the size of the received data, but the actual kvaser_cmd handlers
will happily read any kvaser_cmd fields without checking for cmd->len.

This can cause an overread if the last cmd in the buffer is shorter than
expected for the command type (with cmd->len showing the actual short
size).

Maximum overread seems to be 22 bytes (CMD_LEAF_LOG_MESSAGE), some of
which are delivered to userspace as-is.

Fix that by verifying the length of command before handling it.

This issue can only occur after RX URBs have been set up, i.e. the
interface has been opened at least once.

Cc: stable@vger.kernel.org
Fixes: 080f40a6fa28 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices")
Tested-by: Jimmy Assarsson <extja@kvaser.com>
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://lore.kernel.org/all/20221010150829.199676-2-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: kvaser_usb: Fix use of uninitialized completion

commit cd7f30e174d09a02ca2afa5ef093fb0f0352e0d8 upstream.

flush_comp is initialized when CMD_FLUSH_QUEUE is sent to the device and
completed when the device sends CMD_FLUSH_QUEUE_RESP.

This causes completion of uninitialized completion if the device sends
CMD_FLUSH_QUEUE_RESP before CMD_FLUSH_QUEUE is ever sent (e.g. as a
response to a flush by a previously bound driver, or a misbehaving
device).

Fix that by initializing flush_comp in kvaser_usb_init_one() like the
other completions.

This issue is only triggerable after RX URBs have been set up, i.e. the
interface has been opened at least once.

Cc: stable@vger.kernel.org
Fixes: aec5fb2268b7 ("can: kvaser_usb: Add support for Kvaser USB hydra family")
Tested-by: Jimmy Assarsson <extja@kvaser.com>
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://lore.kernel.org/all/20221010150829.199676-3-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: add quirks for Lenovo OneLink+ Dock

commit 37d49519b41405b08748392c6a7f193d9f77ecd2 upstream.

The Lenovo OneLink+ Dock contains two VL812 USB3.0 controllers:
17ef:1018 upstream
17ef:1019 downstream

These hubs suffer from two separate problems:

1) After the host system was suspended and woken up, the hubs appear to
   be in a random state. Some downstream ports (both internal to the
   built-in audio and network controllers, and external to USB sockets)
   may no longer be functional. The exact list of disabled ports (if
   any) changes from wakeup to wakeup. Ports remain in that state until
   the dock is power-cycled, or until the laptop is rebooted.

   Wakeup sources connected to the hubs (keyboard, WoL on the integrated
   gigabit controller) will wake the system up from suspend, but they
   may no longer work after wakeup (and in that case will no longer work
   as wakeup source in a subsequent suspend-wakeup cycle).

   This issue appears in the logs with messages such as:

     usb 1-6.1-port4: cannot disable (err = -71)
     usb 1-6-port2: cannot disable (err = -71)
     usb 1-6.1: clear tt 1 (80c0) error -71
     usb 1-6-port4: cannot disable (err = -71)
     usb 1-6.4: PM: dpm_run_callback(): usb_dev_resume+0x0/0x10 [usbcore] returns -71
     usb 1-6.4: PM: failed to resume async: error -71
     usb 1-7: reset full-speed USB device number 5 using xhci_hcd
     usb 1-6.1-port1: cannot reset (err = -71)
     usb 1-6.1-port1: cannot reset (err = -71)
     usb 1-6.1-port1: cannot reset (err = -71)
     usb 1-6.1-port1: cannot reset (err = -71)
     usb 1-6.1-port1: cannot reset (err = -71)
     usb 1-6.1-port1: Cannot enable. Maybe the USB cable is bad?
     usb 1-6.1-port1: cannot disable (err = -71)
     usb 1-6.1-port1: cannot reset (err = -71)
     usb 1-6.1-port1: cannot reset (err = -71)
     usb 1-6.1-port1: cannot reset (err = -71)
     usb 1-6.1-port1: cannot reset (err = -71)
     usb 1-6.1-port1: cannot reset (err = -71)
     usb 1-6.1-port1: Cannot enable. Maybe the USB cable is bad?
     usb 1-6.1-port1: cannot disable (err = -71)

2) Some USB devices cannot be enumerated properly. So far I have only
   seen the issue with USB 3.0 devices. The same devices work without
   problem directly connected to the host system, to other systems or to
   other hubs (even when those hubs are connected to the OneLink+ dock).

   One very reliable reproducer is this USB 3.0 HDD enclosure:
   152d:9561 JMicron Technology Corp. / JMicron USA Technology Corp. Mobius

   I have seen it happen sporadically with other USB 3.0 enclosures,
   with controllers from different manufacturers, all self-powered.

   Typical messages in the logs:

     xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
     xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
     usb 2-1.4: device not accepting address 6, error -62
     xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
     xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
     usb 2-1.4: device not accepting address 7, error -62
     usb 2-1-port4: attempt power cycle
     xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
     xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
     usb 2-1.4: device not accepting address 8, error -62
     xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
     xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
     usb 2-1.4: device not accepting address 9, error -62
     usb 2-1-port4: unable to enumerate USB device

Through trial and error, I found that the USB_QUIRK_RESET_RESUME solved
the second issue. Further testing then uncovered the first issue. Test
results are summarized in this table:

=======================================================================================
Settings                        USB2 hotplug    USB3 hotplug    State after waking up
---------------------------------------------------------------------------------------

power/control=auto              works           fails           broken

usbcore.autosuspend=-1          works           works           broken
OR power/control=on

power/control=auto              works (1)       works (1)       works
and USB_QUIRK_RESET_RESUME

power/control=on                works           works           works
and USB_QUIRK_RESET_RESUME

HUB_QUIRK_DISABLE_AUTOSUSPEND   works           works           works
and USB_QUIRK_RESET_RESUME

=======================================================================================

In those results, the power/control settings are applied to both hubs,
both on the USB2 and USB3 side, before each test.

From those results, USB_QUIRK_RESET_RESUME is required to reset the hubs
properly after a suspend-wakeup cycle, and the hubs must not autosuspend
to work around the USB3 issue.

A secondary effect of USB_QUIRK_RESET_RESUME is to prevent the hubs'
upstream links from suspending (the downstream ports can still suspend).
This secondary effect is used in results (1). It is enough to solve the
USB3 problem.

Setting USB_QUIRK_RESET_RESUME on those hubs is the smallest patch that
solves both issues.

Prior to creating this patch, I have used the USB_QUIRK_RESET_RESUME via
the kernel command line for over a year without noticing any side
effect.

Thanks to Oliver Neukum @Suse for explanations of the operations of
USB_QUIRK_RESET_RESUME, and requesting more testing.

Signed-off-by: Jean-Francois Le Fillatre <jflf_kernel@gmx.com>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20220927073407.5672-1-jflf_kernel@gmx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: pressure: dps310: Reset chip after timeout

commit 7b4ab4abcea4c0c10b25187bf2569e5a07e9a20c upstream.

The DPS310 chip has been observed to get "stuck" such that pressure
and temperature measurements are never indicated as "ready" in the
MEAS_CFG register. The only solution is to reset the device and try
again. In order to avoid continual failures, use a boolean flag to
only try the reset after timeout once if errors persist.

Fixes: ba6ec48e76bc ("iio: Add driver for Infineon DPS310")
Cc: <stable@vger.kernel.org>
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220915195719.136812-3-eajames@linux.ibm.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: pressure: dps310: Refactor startup procedure

commit c2329717bdd3fa62f8a2f3d8d85ad0bee4556bd7 upstream.

Move the startup procedure into a function, and correct a missing
check on the return code for writing the PRS_CFG register.

Cc: <stable@vger.kernel.org>
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220915195719.136812-2-eajames@linux.ibm.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: adc: ad7923: fix channel readings for some variants

commit f4f43f01cff2f29779343ade755191afd2581c77 upstream.

Some of the supported devices have 4 or 2 LSB trailing bits that should
not be taken into account. Hence we need to shift these bits out which
fits perfectly on the scan type shift property. This change fixes both
raw and buffered reads.

Fixes: f2f7a449707e ("iio:adc:ad7923: Add support for the ad7904/ad7914/ad7924")
Fixes: 851644a60d20 ("iio: adc: ad7923: Add support for the ad7908/ad7918/ad7928")
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20220912081223.173584-2-nuno.sa@analog.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: ltc2497: Fix reading conversion results

commit 7f4f1096d5921f5d90547596f9ce80e0b924f887 upstream.

After the result of the previous conversion is read the chip
automatically starts a new conversion and doesn't accept new i2c
transfers until this conversion is completed which makes the function
return failure.

So add an early return iff the programming of the new address isn't
needed. Note this will not fix the problem in general, but all cases
that are currently used. Once this changes we get the failure back, but
this can be addressed when the need arises.

Fixes: 69548b7c2c4f ("iio: adc: ltc2497: split protocol independent part in a separate module ")
Reported-by: Meng Li <Meng.Li@windriver.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Tested-by: Denys Zagorui <dzagorui@cisco.com>
Cc: <Stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220815091647.1523532-1-dzagorui@cisco.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: dac: ad5593r: Fix i2c read protocol requirements

commit 558a25f903b4af6361b7fbeea08a6446a0745653 upstream.

For reliable operation across the full range of supported
interface rates, the AD5593R needs a STOP condition between
address write, and data read (like show in the datasheet Figure 40)
so in turn i2c_smbus_read_word_swapped cannot be used.

While at it, a simple helper was added to make the code simpler.

Fixes: 56ca9db862bf ("iio: dac: Add support for the AD5592R/AD5593R ADCs/DACs")
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Cc: <Stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220913073413.140475-2-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs: Fix the error length of VALIDATE_NEGOTIATE_INFO message

commit e98ecc6e94f4e6d21c06660b0f336df02836694f upstream.

Commit d5c7076b772a ("smb3: add smb3.1.1 to default dialect list")
extend the dialects from 3 to 4, but forget to decrease the extended
length when specific the dialect, then the message length is larger
than expected.

This maybe leak some info through network because not initialize the
message body.

After apply this patch, the VALIDATE_NEGOTIATE_INFO message length is
reduced from 28 bytes to 26 bytes.

Fixes: d5c7076b772a ("smb3: add smb3.1.1 to default dialect list")
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Cc: <stable@vger.kernel.org>
Acked-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>