Mohan Kumar [Tue, 29 Mar 2022 15:59:40 +0000 (21:29 +0530)]
ALSA: hda: Avoid unsol event during RPM suspending
commit
6ddc2f749621d5d45ca03edc9f0616bcda136d29 upstream.
There is a corner case with unsol event handling during codec runtime
suspending state. When the codec runtime suspend call initiated, the
codec->in_pm atomic variable would be 0, currently the codec runtime
suspend function calls snd_hdac_enter_pm() which will just increments
the codec->in_pm atomic variable. Consider unsol event happened just
after this step and before snd_hdac_leave_pm() in the codec runtime
suspend function. The snd_hdac_power_up_pm() in the unsol event
flow in hdmi_present_sense_via_verbs() function would just increment
the codec->in_pm atomic variable without calling pm_runtime_get_sync
function.
As codec runtime suspend flow is already in progress and in parallel
unsol event is also accessing the codec verbs, as soon as codec
suspend flow completes and clocks are switched off before completing
the unsol event handling as both functions doesn't wait for each other.
This will result in below errors
[ 589.428020] tegra-hda
3510000.hda: azx_get_response timeout, switching
to polling mode: last cmd=0x505f2f57
[ 589.428344] tegra-hda
3510000.hda: spurious response 0x80000074:0x5,
last cmd=0x505f2f57
[ 589.428547] tegra-hda
3510000.hda: spurious response 0x80000065:0x5,
last cmd=0x505f2f57
To avoid this, the unsol event flow should not perform any codec verb
related operations during RPM_SUSPENDING state.
Signed-off-by: Mohan Kumar <mkumard@nvidia.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220329155940.26331-1-mkumard@nvidia.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Xiaomeng Tong [Sun, 27 Mar 2022 06:08:22 +0000 (14:08 +0800)]
ALSA: cs4236: fix an incorrect NULL check on list iterator
commit
0112f822f8a6d8039c94e0bc9b264d7ffc5d4704 upstream.
The bug is here:
err = snd_card_cs423x_pnp(dev, card->private_data, pdev, cdev);
The list iterator value 'cdev' will *always* be set and non-NULL
by list_for_each_entry(), so it is incorrect to assume that the
iterator value will be NULL if the list is empty or no element
is found.
To fix the bug, use a new variable 'iter' as the list iterator,
while use the original variable 'cdev' as a dedicated pointer
to point to the found element. And snd_card_cs423x_pnp() itself
has NULL check for cdev.
Cc: stable@vger.kernel.org
Fixes:
c2b73d1458014 ("ALSA: cs4236: cs4232 and cs4236 driver merge to solve PnP BIOS detection")
Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com>
Link: https://lore.kernel.org/r/20220327060822.4735-1-xiam0nd.tong@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Paulo Alcantara [Tue, 29 Mar 2022 19:20:06 +0000 (16:20 -0300)]
cifs: fix NULL ptr dereference in smb2_ioctl_query_info()
commit
d6f5e358452479fa8a773b5c6ccc9e4ec5a20880 upstream.
When calling smb2_ioctl_query_info() with invalid
smb_query_info::flags, a NULL ptr dereference is triggered when trying
to kfree() uninitialised rqst[n].rq_iov array.
This also fixes leaked paths that are created in SMB2_open_init()
which required SMB2_open_free() to properly free them.
Here is a small C reproducer that triggers it
#include <stdio.h>
#include <stdlib.h>
#include <stdint.h>
#include <unistd.h>
#include <fcntl.h>
#include <sys/ioctl.h>
#define die(s) perror(s), exit(1)
#define QUERY_INFO 0xc018cf07
int main(int argc, char *argv[])
{
int fd;
if (argc < 2)
exit(1);
fd = open(argv[1], O_RDONLY);
if (fd == -1)
die("open");
if (ioctl(fd, QUERY_INFO, (uint32_t[]) { 0, 0, 0, 4, 0, 0}) == -1)
die("ioctl");
close(fd);
return 0;
}
mount.cifs //srv/share /mnt -o ...
gcc repro.c && ./a.out /mnt/f0
[ 1832.124468] CIFS: VFS: \\w22-dc.zelda.test\test Invalid passthru query flags: 0x4
[ 1832.125043] general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN NOPTI
[ 1832.125764] KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
[ 1832.126241] CPU: 3 PID: 1133 Comm: a.out Not tainted 5.17.0-rc8 #2
[ 1832.126630] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS
rel-1.15.0-0-g2dd4b9b-rebuilt.opensuse.org 04/01/2014
[ 1832.127322] RIP: 0010:smb2_ioctl_query_info+0x7a3/0xe30 [cifs]
[ 1832.127749] Code: 00 00 00 fc ff df 48 c1 ea 03 80 3c 02 00 0f 85 6c 05 00 00 48 b8 00 00 00 00 00 fc ff df 4d 8b 74 24 28 4c 89 f2 48 c1 ea 03 <80> 3c 02 00 0f 85 cb 04 00 00 49 8b 3e e8 bb fc fa ff 48 89 da 48
[ 1832.128911] RSP: 0018:
ffffc90000957b08 EFLAGS:
00010256
[ 1832.129243] RAX:
dffffc0000000000 RBX:
ffff888117e9b850 RCX:
ffffffffa020580d
[ 1832.129691] RDX:
0000000000000000 RSI:
0000000000000004 RDI:
ffffffffa043a2c0
[ 1832.130137] RBP:
ffff888117e9b878 R08:
0000000000000001 R09:
0000000000000003
[ 1832.130585] R10:
fffffbfff4087458 R11:
0000000000000001 R12:
ffff888117e9b800
[ 1832.131037] R13:
00000000ffffffea R14:
0000000000000000 R15:
ffff888117e9b8a8
[ 1832.131485] FS:
00007fcee9900740(0000) GS:
ffff888151a00000(0000) knlGS:
0000000000000000
[ 1832.131993] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 1832.132354] CR2:
00007fcee9a1ef5e CR3:
0000000114cd2000 CR4:
0000000000350ee0
[ 1832.132801] Call Trace:
[ 1832.132962] <TASK>
[ 1832.133104] ? smb2_query_reparse_tag+0x890/0x890 [cifs]
[ 1832.133489] ? cifs_mapchar+0x460/0x460 [cifs]
[ 1832.133822] ? rcu_read_lock_sched_held+0x3f/0x70
[ 1832.134125] ? cifs_strndup_to_utf16+0x15b/0x250 [cifs]
[ 1832.134502] ? lock_downgrade+0x6f0/0x6f0
[ 1832.134760] ? cifs_convert_path_to_utf16+0x198/0x220 [cifs]
[ 1832.135170] ? smb2_check_message+0x1080/0x1080 [cifs]
[ 1832.135545] cifs_ioctl+0x1577/0x3320 [cifs]
[ 1832.135864] ? lock_downgrade+0x6f0/0x6f0
[ 1832.136125] ? cifs_readdir+0x2e60/0x2e60 [cifs]
[ 1832.136468] ? rcu_read_lock_sched_held+0x3f/0x70
[ 1832.136769] ? __rseq_handle_notify_resume+0x80b/0xbe0
[ 1832.137096] ? __up_read+0x192/0x710
[ 1832.137327] ? __ia32_sys_rseq+0xf0/0xf0
[ 1832.137578] ? __x64_sys_openat+0x11f/0x1d0
[ 1832.137850] __x64_sys_ioctl+0x127/0x190
[ 1832.138103] do_syscall_64+0x3b/0x90
[ 1832.138378] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 1832.138702] RIP: 0033:0x7fcee9a253df
[ 1832.138937] Code: 00 48 89 44 24 18 31 c0 48 8d 44 24 60 c7 04 24 10 00 00 00 48 89 44 24 08 48 8d 44 24 20 48 89 44 24 10 b8 10 00 00 00 0f 05 <41> 89 c0 3d 00 f0 ff ff 77 1f 48 8b 44 24 18 64 48 2b 04 25 28 00
[ 1832.140107] RSP: 002b:
00007ffeba94a8a0 EFLAGS:
00000246 ORIG_RAX:
0000000000000010
[ 1832.140606] RAX:
ffffffffffffffda RBX:
0000000000000000 RCX:
00007fcee9a253df
[ 1832.141058] RDX:
00007ffeba94a910 RSI:
00000000c018cf07 RDI:
0000000000000003
[ 1832.141503] RBP:
00007ffeba94a930 R08:
00007fcee9b24db0 R09:
00007fcee9b45c4e
[ 1832.141948] R10:
00007fcee9918d40 R11:
0000000000000246 R12:
00007ffeba94aa48
[ 1832.142396] R13:
0000000000401176 R14:
0000000000403df8 R15:
00007fcee9b78000
[ 1832.142851] </TASK>
[ 1832.142994] Modules linked in: cifs cifs_arc4 cifs_md4 bpf_preload [last unloaded: cifs]
Cc: stable@vger.kernel.org
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Paulo Alcantara [Tue, 29 Mar 2022 19:20:05 +0000 (16:20 -0300)]
cifs: prevent bad output lengths in smb2_ioctl_query_info()
commit
b92e358757b91c2827af112cae9af513f26a3f34 upstream.
When calling smb2_ioctl_query_info() with
smb_query_info::flags=PASSTHRU_FSCTL and
smb_query_info::output_buffer_length=0, the following would return
0x10
buffer = memdup_user(arg + sizeof(struct smb_query_info),
qi.output_buffer_length);
if (IS_ERR(buffer)) {
kfree(vars);
return PTR_ERR(buffer);
}
rather than a valid pointer thus making IS_ERR() check fail. This
would then cause a NULL ptr deference in @buffer when accessing it
later in smb2_ioctl_query_ioctl(). While at it, prevent having a
@buffer smaller than 8 bytes to correctly handle SMB2_SET_INFO
FileEndOfFileInformation requests when
smb_query_info::flags=PASSTHRU_SET_INFO.
Here is a small C reproducer which triggers a NULL ptr in @buffer when
passing an invalid smb_query_info::flags
#include <stdio.h>
#include <stdlib.h>
#include <stdint.h>
#include <unistd.h>
#include <fcntl.h>
#include <sys/ioctl.h>
#define die(s) perror(s), exit(1)
#define QUERY_INFO 0xc018cf07
int main(int argc, char *argv[])
{
int fd;
if (argc < 2)
exit(1);
fd = open(argv[1], O_RDONLY);
if (fd == -1)
die("open");
if (ioctl(fd, QUERY_INFO, (uint32_t[]) { 0, 0, 0, 4, 0, 0}) == -1)
die("ioctl");
close(fd);
return 0;
}
mount.cifs //srv/share /mnt -o ...
gcc repro.c && ./a.out /mnt/f0
[ 114.138620] general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN NOPTI
[ 114.139310] KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
[ 114.139775] CPU: 2 PID: 995 Comm: a.out Not tainted 5.17.0-rc8 #1
[ 114.140148] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS
rel-1.15.0-0-g2dd4b9b-rebuilt.opensuse.org 04/01/2014
[ 114.140818] RIP: 0010:smb2_ioctl_query_info+0x206/0x410 [cifs]
[ 114.141221] Code: 00 00 00 00 fc ff df 48 c1 ea 03 80 3c 02 00 0f 85 c8 01 00 00 48 b8 00 00 00 00 00 fc ff df 4c 8b 7b 28 4c 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 9c 01 00 00 49 8b 3f e8 58 02 fb ff 48 8b 14 24
[ 114.142348] RSP: 0018:
ffffc90000b47b00 EFLAGS:
00010256
[ 114.142692] RAX:
dffffc0000000000 RBX:
ffff888115503200 RCX:
ffffffffa020580d
[ 114.143119] RDX:
0000000000000000 RSI:
0000000000000004 RDI:
ffffffffa043a380
[ 114.143544] RBP:
ffff888115503278 R08:
0000000000000001 R09:
0000000000000003
[ 114.143983] R10:
fffffbfff4087470 R11:
0000000000000001 R12:
ffff888115503288
[ 114.144424] R13:
00000000ffffffea R14:
ffff888115503228 R15:
0000000000000000
[ 114.144852] FS:
00007f7aeabdf740(0000) GS:
ffff888151600000(0000) knlGS:
0000000000000000
[ 114.145338] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 114.145692] CR2:
00007f7aeacfdf5e CR3:
000000012000e000 CR4:
0000000000350ee0
[ 114.146131] Call Trace:
[ 114.146291] <TASK>
[ 114.146432] ? smb2_query_reparse_tag+0x890/0x890 [cifs]
[ 114.146800] ? cifs_mapchar+0x460/0x460 [cifs]
[ 114.147121] ? rcu_read_lock_sched_held+0x3f/0x70
[ 114.147412] ? cifs_strndup_to_utf16+0x15b/0x250 [cifs]
[ 114.147775] ? dentry_path_raw+0xa6/0xf0
[ 114.148024] ? cifs_convert_path_to_utf16+0x198/0x220 [cifs]
[ 114.148413] ? smb2_check_message+0x1080/0x1080 [cifs]
[ 114.148766] ? rcu_read_lock_sched_held+0x3f/0x70
[ 114.149065] cifs_ioctl+0x1577/0x3320 [cifs]
[ 114.149371] ? lock_downgrade+0x6f0/0x6f0
[ 114.149631] ? cifs_readdir+0x2e60/0x2e60 [cifs]
[ 114.149956] ? rcu_read_lock_sched_held+0x3f/0x70
[ 114.150250] ? __rseq_handle_notify_resume+0x80b/0xbe0
[ 114.150562] ? __up_read+0x192/0x710
[ 114.150791] ? __ia32_sys_rseq+0xf0/0xf0
[ 114.151025] ? __x64_sys_openat+0x11f/0x1d0
[ 114.151296] __x64_sys_ioctl+0x127/0x190
[ 114.151549] do_syscall_64+0x3b/0x90
[ 114.151768] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 114.152079] RIP: 0033:0x7f7aead043df
[ 114.152306] Code: 00 48 89 44 24 18 31 c0 48 8d 44 24 60 c7 04 24 10 00 00 00 48 89 44 24 08 48 8d 44 24 20 48 89 44 24 10 b8 10 00 00 00 0f 05 <41> 89 c0 3d 00 f0 ff ff 77 1f 48 8b 44 24 18 64 48 2b 04 25 28 00
[ 114.153431] RSP: 002b:
00007ffc2e0c1f80 EFLAGS:
00000246 ORIG_RAX:
0000000000000010
[ 114.153890] RAX:
ffffffffffffffda RBX:
0000000000000000 RCX:
00007f7aead043df
[ 114.154315] RDX:
00007ffc2e0c1ff0 RSI:
00000000c018cf07 RDI:
0000000000000003
[ 114.154747] RBP:
00007ffc2e0c2010 R08:
00007f7aeae03db0 R09:
00007f7aeae24c4e
[ 114.155192] R10:
00007f7aeabf7d40 R11:
0000000000000246 R12:
00007ffc2e0c2128
[ 114.155642] R13:
0000000000401176 R14:
0000000000403df8 R15:
00007f7aeae57000
[ 114.156071] </TASK>
[ 114.156218] Modules linked in: cifs cifs_arc4 cifs_md4 bpf_preload
[ 114.156608] ---[ end trace
0000000000000000 ]---
[ 114.156898] RIP: 0010:smb2_ioctl_query_info+0x206/0x410 [cifs]
[ 114.157792] Code: 00 00 00 00 fc ff df 48 c1 ea 03 80 3c 02 00 0f 85 c8 01 00 00 48 b8 00 00 00 00 00 fc ff df 4c 8b 7b 28 4c 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 9c 01 00 00 49 8b 3f e8 58 02 fb ff 48 8b 14 24
[ 114.159293] RSP: 0018:
ffffc90000b47b00 EFLAGS:
00010256
[ 114.159641] RAX:
dffffc0000000000 RBX:
ffff888115503200 RCX:
ffffffffa020580d
[ 114.160093] RDX:
0000000000000000 RSI:
0000000000000004 RDI:
ffffffffa043a380
[ 114.160699] RBP:
ffff888115503278 R08:
0000000000000001 R09:
0000000000000003
[ 114.161196] R10:
fffffbfff4087470 R11:
0000000000000001 R12:
ffff888115503288
[ 114.155642] R13:
0000000000401176 R14:
0000000000403df8 R15:
00007f7aeae57000
[ 114.156071] </TASK>
[ 114.156218] Modules linked in: cifs cifs_arc4 cifs_md4 bpf_preload
[ 114.156608] ---[ end trace
0000000000000000 ]---
[ 114.156898] RIP: 0010:smb2_ioctl_query_info+0x206/0x410 [cifs]
[ 114.157792] Code: 00 00 00 00 fc ff df 48 c1 ea 03 80 3c 02 00 0f 85 c8 01 00 00 48 b8 00 00 00 00 00 fc ff df 4c 8b 7b 28 4c 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 9c 01 00 00 49 8b 3f e8 58 02 fb ff 48 8b 14 24
[ 114.159293] RSP: 0018:
ffffc90000b47b00 EFLAGS:
00010256
[ 114.159641] RAX:
dffffc0000000000 RBX:
ffff888115503200 RCX:
ffffffffa020580d
[ 114.160093] RDX:
0000000000000000 RSI:
0000000000000004 RDI:
ffffffffa043a380
[ 114.160699] RBP:
ffff888115503278 R08:
0000000000000001 R09:
0000000000000003
[ 114.161196] R10:
fffffbfff4087470 R11:
0000000000000001 R12:
ffff888115503288
[ 114.161823] R13:
00000000ffffffea R14:
ffff888115503228 R15:
0000000000000000
[ 114.162274] FS:
00007f7aeabdf740(0000) GS:
ffff888151600000(0000) knlGS:
0000000000000000
[ 114.162853] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 114.163218] CR2:
00007f7aeacfdf5e CR3:
000000012000e000 CR4:
0000000000350ee0
[ 114.163691] Kernel panic - not syncing: Fatal exception
[ 114.164087] Kernel Offset: disabled
[ 114.164316] ---[ end Kernel panic - not syncing: Fatal exception ]---
Cc: stable@vger.kernel.org
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
José Expósito [Fri, 1 Apr 2022 04:15:36 +0000 (21:15 -0700)]
Revert "Input: clear BTN_RIGHT/MIDDLE on buttonpads"
commit
8b188fba75195745026e11d408e4a7e94e01d701 upstream.
This reverts commit
37ef4c19b4c659926ce65a7ac709ceaefb211c40.
The touchpad present in the Dell Precision 7550 and 7750 laptops
reports a HID_DG_BUTTONTYPE of type MT_BUTTONTYPE_CLICKPAD. However,
the device is not a clickpad, it is a touchpad with physical buttons.
In order to fix this issue, a quirk for the device was introduced in
libinput [1] [2] to disable the INPUT_PROP_BUTTONPAD property:
[Precision 7x50 Touchpad]
MatchBus=i2c
MatchUdevType=touchpad
MatchDMIModalias=dmi:*svnDellInc.:pnPrecision7?50*
AttrInputPropDisable=INPUT_PROP_BUTTONPAD
However, because of the change introduced in
37ef4c19b4 ("Input: clear
BTN_RIGHT/MIDDLE on buttonpads") the BTN_RIGHT key bit is not mapped
anymore breaking the device right click button and making impossible to
workaround it in user space.
In order to avoid breakage on other present or future devices, revert
the patch causing the issue.
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220321184404.20025-1-jose.exposito89@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dmitry Vyukov [Mon, 14 Mar 2022 09:06:52 +0000 (10:06 +0100)]
riscv: Increase stack size under KASAN
commit
b81d591386c3a50b96dddcf663628ea0df0bf2b3 upstream.
KASAN requires more stack space because of compiler instrumentation.
Increase stack size as other arches do.
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Reported-by: syzbot+0600986d88e2d4d7ebb8@syzkaller.appspotmail.com
Fixes:
8ad8b72721d0 ("riscv: Add KASAN support")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nikita Shubin [Fri, 11 Mar 2022 06:58:15 +0000 (09:58 +0300)]
riscv: Fix fill_callchain return value
commit
2b2b574ac587ec5bd7716a356492a85ab8b0ce9f upstream.
perf_callchain_store return 0 on success, -1 otherwise,
fix fill_callchain to return correct bool value.
Fixes:
dbeb90b0c1eb ("riscv: Add perf callchain support")
Signed-off-by: Nikita Shubin <n.shubin@yadro.com>
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Manish Chopra [Wed, 2 Mar 2022 10:52:22 +0000 (02:52 -0800)]
qed: validate and restrict untrusted VFs vlan promisc mode
commit
cbcc44db2cf7b836896733acc0e5ea966136ed22 upstream.
Today when VFs are put in promiscuous mode, they can request PF
to configure device for them to receive all VLANs traffic regardless
of what vlan is configured by the PF (via ip link) and PF allows this
config request regardless of whether VF is trusted or not.
From security POV, when VLAN is configured for VF through PF (via ip link),
honour such config requests from VF only when they are configured to be
trusted, otherwise restrict such VFs vlan promisc mode config.
Cc: stable@vger.kernel.org
Fixes:
f990c82c385b ("qed*: Add support for ndo_set_vf_trust")
Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Manish Chopra [Wed, 2 Mar 2022 10:52:21 +0000 (02:52 -0800)]
qed: display VF trust config
commit
4e6e6bec7440b9b76f312f28b1f4e944eebb3abc upstream.
Driver does support SR-IOV VFs trust configuration but
it does not display it when queried via ip link utility.
Cc: stable@vger.kernel.org
Fixes:
f990c82c385b ("qed*: Add support for ndo_set_vf_trust")
Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Damien Le Moal [Sun, 20 Feb 2022 03:17:40 +0000 (12:17 +0900)]
scsi: libsas: Fix sas_ata_qc_issue() handling of NCQ NON DATA commands
commit
8454563e4c2aafbfb81a383ab423ea8b9b430a25 upstream.
To detect for the DMA_NONE (no data transfer) DMA direction,
sas_ata_qc_issue() tests if the command protocol is ATA_PROT_NODATA. This
test does not include the ATA_CMD_NCQ_NON_DATA command as this command
protocol is defined as ATA_PROT_NCQ_NODATA (equal to ATA_PROT_FLAG_NCQ) and
not as ATA_PROT_NODATA.
To include both NCQ and non-NCQ commands when testing for the DMA_NONE DMA
direction, use "!ata_is_data()".
Link: https://lore.kernel.org/r/20220220031810.738362-2-damien.lemoal@opensource.wdc.com
Fixes:
176ddd89171d ("scsi: libsas: Reset num_scatter if libata marks qc as NODATA")
Cc: stable@vger.kernel.org
Reviewed-by: John Garry <john.garry@huawei.com>
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hugh Dickins [Tue, 22 Mar 2022 21:45:59 +0000 (14:45 -0700)]
mempolicy: mbind_range() set_policy() after vma_merge()
commit
4e0906008cdb56381638aa17d9c32734eae6d37a upstream.
v2.6.34 commit
9d8cebd4bcd7 ("mm: fix mbind vma merge problem") introduced
vma_merge() to mbind_range(); but unlike madvise, mlock and mprotect, it
put a "continue" to next vma where its precedents go to update flags on
current vma before advancing: that left vma with the wrong setting in the
infamous vma_merge() case 8.
v3.10 commit
1444f92c8498 ("mm: merging memory blocks resets mempolicy")
tried to fix that in vma_adjust(), without fully understanding the issue.
v3.11 commit
3964acd0dbec ("mm: mempolicy: fix mbind_range() &&
vma_adjust() interaction") reverted that, and went about the fix in the
right way, but chose to optimize out an unnecessary mpol_dup() with a
prior mpol_equal() test. But on tmpfs, that also pessimized out the vital
call to its ->set_policy(), leaving the new mbind unenforced.
The user visible effect was that the pages got allocated on the local
node (happened to be 0), after the mbind() caller had specifically
asked for them to be allocated on node 1. There was not any page
migration involved in the case reported: the pages simply got allocated
on the wrong node.
Just delete that optimization now (though it could be made conditional on
vma not having a set_policy). Also remove the "next" variable: it turned
out to be blameless, but also pointless.
Link: https://lkml.kernel.org/r/319e4db9-64ae-4bca-92f0-ade85d342ff@google.com
Fixes:
3964acd0dbec ("mm: mempolicy: fix mbind_range() && vma_adjust() interaction")
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rik van Riel [Tue, 22 Mar 2022 21:44:09 +0000 (14:44 -0700)]
mm: invalidate hwpoison page cache page in fault path
commit
e53ac7374e64dede04d745ff0e70ff5048378d1f upstream.
Sometimes the page offlining code can leave behind a hwpoisoned clean
page cache page. This can lead to programs being killed over and over
and over again as they fault in the hwpoisoned page, get killed, and
then get re-spawned by whatever wanted to run them.
This is particularly embarrassing when the page was offlined due to
having too many corrected memory errors. Now we are killing tasks due
to them trying to access memory that probably isn't even corrupted.
This problem can be avoided by invalidating the page from the page fault
handler, which already has a branch for dealing with these kinds of
pages. With this patch we simply pretend the page fault was successful
if the page was invalidated, return to userspace, incur another page
fault, read in the file from disk (to a new memory page), and then
everything works again.
Link: https://lkml.kernel.org/r/20220212213740.423efcea@imladris.surriel.com
Signed-off-by: Rik van Riel <riel@surriel.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alistair Popple [Tue, 22 Mar 2022 21:43:26 +0000 (14:43 -0700)]
mm/pages_alloc.c: don't create ZONE_MOVABLE beyond the end of a node
commit
ddbc84f3f595cf1fc8234a191193b5d20ad43938 upstream.
ZONE_MOVABLE uses the remaining memory in each node. Its starting pfn
is also aligned to MAX_ORDER_NR_PAGES. It is possible for the remaining
memory in a node to be less than MAX_ORDER_NR_PAGES, meaning there is
not enough room for ZONE_MOVABLE on that node.
Unfortunately this condition is not checked for. This leads to
zone_movable_pfn[] getting set to a pfn greater than the last pfn in a
node.
calculate_node_totalpages() then sets zone->present_pages to be greater
than zone->spanned_pages which is invalid, as spanned_pages represents
the maximum number of pages in a zone assuming no holes.
Subsequently it is possible free_area_init_core() will observe a zone of
size zero with present pages. In this case it will skip setting up the
zone, including the initialisation of free_lists[].
However populated_zone() checks zone->present_pages to see if a zone has
memory available. This is used by iterators such as
walk_zones_in_node(). pagetypeinfo_showfree() uses this to walk the
free_list of each zone in each node, which are assumed to be initialised
due to the zone not being empty.
As free_area_init_core() never initialised the free_lists[] this results
in the following kernel crash when trying to read /proc/pagetypeinfo:
BUG: kernel NULL pointer dereference, address:
0000000000000000
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC NOPTI
CPU: 0 PID: 456 Comm: cat Not tainted 5.16.0 #461
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014
RIP: 0010:pagetypeinfo_show+0x163/0x460
Code: 9e 82 e8 80 57 0e 00 49 8b 06 b9 01 00 00 00 4c 39 f0 75 16 e9 65 02 00 00 48 83 c1 01 48 81 f9 a0 86 01 00 0f 84 48 02 00 00 <48> 8b 00 4c 39 f0 75 e7 48 c7 c2 80 a2 e2 82 48 c7 c6 79 ef e3 82
RSP: 0018:
ffffc90001c4bd10 EFLAGS:
00010003
RAX:
0000000000000000 RBX:
ffff88801105f638 RCX:
0000000000000001
RDX:
0000000000000001 RSI:
000000000000068b RDI:
ffff8880163dc68b
RBP:
ffffc90001c4bd90 R08:
0000000000000001 R09:
ffff8880163dc67e
R10:
656c6261766f6d6e R11:
6c6261766f6d6e55 R12:
ffff88807ffb4a00
R13:
ffff88807ffb49f8 R14:
ffff88807ffb4580 R15:
ffff88807ffb3000
FS:
00007f9c83eff5c0(0000) GS:
ffff88807dc00000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
0000000000000000 CR3:
0000000013c8e000 CR4:
0000000000350ef0
Call Trace:
seq_read_iter+0x128/0x460
proc_reg_read_iter+0x51/0x80
new_sync_read+0x113/0x1a0
vfs_read+0x136/0x1d0
ksys_read+0x70/0xf0
__x64_sys_read+0x1a/0x20
do_syscall_64+0x3b/0xc0
entry_SYSCALL_64_after_hwframe+0x44/0xae
Fix this by checking that the aligned zone_movable_pfn[] does not exceed
the end of the node, and if it does skip creating a movable zone on this
node.
Link: https://lkml.kernel.org/r/20220215025831.2113067-1-apopple@nvidia.com
Fixes:
2a1e274acf0b ("Create the ZONE_MOVABLE zone")
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Baokun Li [Fri, 14 Jan 2022 10:28:54 +0000 (18:28 +0800)]
jffs2: fix memory leak in jffs2_scan_medium
commit
9cdd3128874f5fe759e2c4e1360ab7fb96a8d1df upstream.
If an error is returned in jffs2_scan_eraseblock() and some memory
has been added to the jffs2_summary *s, we can observe the following
kmemleak report:
--------------------------------------------
unreferenced object 0xffff88812b889c40 (size 64):
comm "mount", pid 692, jiffies
4294838325 (age 34.288s)
hex dump (first 32 bytes):
40 48 b5 14 81 88 ff ff 01 e0 31 00 00 00 50 00 @H........1...P.
00 00 01 00 00 00 01 00 00 00 02 00 00 00 09 08 ................
backtrace:
[<
ffffffffae93a3a3>] __kmalloc+0x613/0x910
[<
ffffffffaf423b9c>] jffs2_sum_add_dirent_mem+0x5c/0xa0
[<
ffffffffb0f3afa8>] jffs2_scan_medium.cold+0x36e5/0x4794
[<
ffffffffb0f3dbe1>] jffs2_do_mount_fs.cold+0xa7/0x2267
[<
ffffffffaf40acf3>] jffs2_do_fill_super+0x383/0xc30
[<
ffffffffaf40c00a>] jffs2_fill_super+0x2ea/0x4c0
[<
ffffffffb0315d64>] mtd_get_sb+0x254/0x400
[<
ffffffffb0315f5f>] mtd_get_sb_by_nr+0x4f/0xd0
[<
ffffffffb0316478>] get_tree_mtd+0x498/0x840
[<
ffffffffaf40bd15>] jffs2_get_tree+0x25/0x30
[<
ffffffffae9f358d>] vfs_get_tree+0x8d/0x2e0
[<
ffffffffaea7a98f>] path_mount+0x50f/0x1e50
[<
ffffffffaea7c3d7>] do_mount+0x107/0x130
[<
ffffffffaea7c5c5>] __se_sys_mount+0x1c5/0x2f0
[<
ffffffffaea7c917>] __x64_sys_mount+0xc7/0x160
[<
ffffffffb10142f5>] do_syscall_64+0x45/0x70
unreferenced object 0xffff888114b54840 (size 32):
comm "mount", pid 692, jiffies
4294838325 (age 34.288s)
hex dump (first 32 bytes):
c0 75 b5 14 81 88 ff ff 02 e0 02 00 00 00 02 00 .u..............
00 00 84 00 00 00 44 00 00 00 6b 6b 6b 6b 6b a5 ......D...kkkkk.
backtrace:
[<
ffffffffae93be24>] kmem_cache_alloc_trace+0x584/0x880
[<
ffffffffaf423b04>] jffs2_sum_add_inode_mem+0x54/0x90
[<
ffffffffb0f3bd44>] jffs2_scan_medium.cold+0x4481/0x4794
[...]
unreferenced object 0xffff888114b57280 (size 32):
comm "mount", pid 692, jiffies
4294838393 (age 34.357s)
hex dump (first 32 bytes):
10 d5 6c 11 81 88 ff ff 08 e0 05 00 00 00 01 00 ..l.............
00 00 38 02 00 00 28 00 00 00 6b 6b 6b 6b 6b a5 ..8...(...kkkkk.
backtrace:
[<
ffffffffae93be24>] kmem_cache_alloc_trace+0x584/0x880
[<
ffffffffaf423c34>] jffs2_sum_add_xattr_mem+0x54/0x90
[<
ffffffffb0f3a24f>] jffs2_scan_medium.cold+0x298c/0x4794
[...]
unreferenced object 0xffff8881116cd510 (size 16):
comm "mount", pid 692, jiffies
4294838395 (age 34.355s)
hex dump (first 16 bytes):
00 00 00 00 00 00 00 00 09 e0 60 02 00 00 6b a5 ..........`...k.
backtrace:
[<
ffffffffae93be24>] kmem_cache_alloc_trace+0x584/0x880
[<
ffffffffaf423cc4>] jffs2_sum_add_xref_mem+0x54/0x90
[<
ffffffffb0f3b2e3>] jffs2_scan_medium.cold+0x3a20/0x4794
[...]
--------------------------------------------
Therefore, we should call jffs2_sum_reset_collected(s) on exit to
release the memory added in s. In addition, a new tag "out_buf" is
added to prevent the NULL pointer reference caused by s being NULL.
(thanks to Zhang Yi for this analysis)
Fixes:
e631ddba5887 ("[JFFS2] Add erase block summary support (mount time improvement)")
Cc: stable@vger.kernel.org
Co-developed-with: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Baokun Li [Fri, 14 Jan 2022 10:28:53 +0000 (18:28 +0800)]
jffs2: fix memory leak in jffs2_do_mount_fs
commit
d051cef784de4d54835f6b6836d98a8f6935772c upstream.
If jffs2_build_filesystem() in jffs2_do_mount_fs() returns an error,
we can observe the following kmemleak report:
--------------------------------------------
unreferenced object 0xffff88811b25a640 (size 64):
comm "mount", pid 691, jiffies
4294957728 (age 71.952s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<
ffffffffa493be24>] kmem_cache_alloc_trace+0x584/0x880
[<
ffffffffa5423a06>] jffs2_sum_init+0x86/0x130
[<
ffffffffa5400e58>] jffs2_do_mount_fs+0x798/0xac0
[<
ffffffffa540acf3>] jffs2_do_fill_super+0x383/0xc30
[<
ffffffffa540c00a>] jffs2_fill_super+0x2ea/0x4c0
[...]
unreferenced object 0xffff88812c760000 (size 65536):
comm "mount", pid 691, jiffies
4294957728 (age 71.952s)
hex dump (first 32 bytes):
bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................
bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................
backtrace:
[<
ffffffffa493a449>] __kmalloc+0x6b9/0x910
[<
ffffffffa5423a57>] jffs2_sum_init+0xd7/0x130
[<
ffffffffa5400e58>] jffs2_do_mount_fs+0x798/0xac0
[<
ffffffffa540acf3>] jffs2_do_fill_super+0x383/0xc30
[<
ffffffffa540c00a>] jffs2_fill_super+0x2ea/0x4c0
[...]
--------------------------------------------
This is because the resources allocated in jffs2_sum_init() are not
released. Call jffs2_sum_exit() to release these resources to solve
the problem.
Fixes:
e631ddba5887 ("[JFFS2] Add erase block summary support (mount time improvement)")
Cc: stable@vger.kernel.org
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Baokun Li [Tue, 28 Dec 2021 12:54:30 +0000 (20:54 +0800)]
jffs2: fix use-after-free in jffs2_clear_xattr_subsystem
commit
4c7c44ee1650677fbe89d86edbad9497b7679b5c upstream.
When we mount a jffs2 image, assume that the first few blocks of
the image are normal and contain at least one xattr-related inode,
but the next block is abnormal. As a result, an error is returned
in jffs2_scan_eraseblock(). jffs2_clear_xattr_subsystem() is then
called in jffs2_build_filesystem() and then again in
jffs2_do_fill_super().
Finally we can observe the following report:
==================================================================
BUG: KASAN: use-after-free in jffs2_clear_xattr_subsystem+0x95/0x6ac
Read of size 8 at addr
ffff8881243384e0 by task mount/719
Call Trace:
dump_stack+0x115/0x16b
jffs2_clear_xattr_subsystem+0x95/0x6ac
jffs2_do_fill_super+0x84f/0xc30
jffs2_fill_super+0x2ea/0x4c0
mtd_get_sb+0x254/0x400
mtd_get_sb_by_nr+0x4f/0xd0
get_tree_mtd+0x498/0x840
jffs2_get_tree+0x25/0x30
vfs_get_tree+0x8d/0x2e0
path_mount+0x50f/0x1e50
do_mount+0x107/0x130
__se_sys_mount+0x1c5/0x2f0
__x64_sys_mount+0xc7/0x160
do_syscall_64+0x45/0x70
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Allocated by task 719:
kasan_save_stack+0x23/0x60
__kasan_kmalloc.constprop.0+0x10b/0x120
kasan_slab_alloc+0x12/0x20
kmem_cache_alloc+0x1c0/0x870
jffs2_alloc_xattr_ref+0x2f/0xa0
jffs2_scan_medium.cold+0x3713/0x4794
jffs2_do_mount_fs.cold+0xa7/0x2253
jffs2_do_fill_super+0x383/0xc30
jffs2_fill_super+0x2ea/0x4c0
[...]
Freed by task 719:
kmem_cache_free+0xcc/0x7b0
jffs2_free_xattr_ref+0x78/0x98
jffs2_clear_xattr_subsystem+0xa1/0x6ac
jffs2_do_mount_fs.cold+0x5e6/0x2253
jffs2_do_fill_super+0x383/0xc30
jffs2_fill_super+0x2ea/0x4c0
[...]
The buggy address belongs to the object at
ffff8881243384b8
which belongs to the cache jffs2_xattr_ref of size 48
The buggy address is located 40 bytes inside of
48-byte region [
ffff8881243384b8,
ffff8881243384e8)
[...]
==================================================================
The triggering of the BUG is shown in the following stack:
-----------------------------------------------------------
jffs2_fill_super
jffs2_do_fill_super
jffs2_do_mount_fs
jffs2_build_filesystem
jffs2_scan_medium
jffs2_scan_eraseblock <--- ERROR
jffs2_clear_xattr_subsystem <--- free
jffs2_clear_xattr_subsystem <--- free again
-----------------------------------------------------------
An error is returned in jffs2_do_mount_fs(). If the error is returned
by jffs2_sum_init(), the jffs2_clear_xattr_subsystem() does not need to
be executed. If the error is returned by jffs2_build_filesystem(), the
jffs2_clear_xattr_subsystem() also does not need to be executed again.
So move jffs2_clear_xattr_subsystem() from 'out_inohash' to 'out_root'
to fix this UAF problem.
Fixes:
aa98d7cf59b5 ("[JFFS2][XATTR] XATTR support on JFFS2 (version. 5)")
Cc: stable@vger.kernel.org
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hangyu Hua [Mon, 28 Feb 2022 08:36:39 +0000 (16:36 +0800)]
can: ems_usb: ems_usb_start_xmit(): fix double dev_kfree_skb() in error path
commit
c70222752228a62135cee3409dccefd494a24646 upstream.
There is no need to call dev_kfree_skb() when usb_submit_urb() fails
beacause can_put_echo_skb() deletes the original skb and
can_free_echo_skb() deletes the cloned skb.
Link: https://lore.kernel.org/all/20220228083639.38183-1-hbh25y@gmail.com
Fixes:
702171adeed3 ("ems_usb: Added support for EMS CPC-USB/ARM7 CAN/USB interface")
Cc: stable@vger.kernel.org
Cc: Sebastian Haas <haas@ems-wuensche.com>
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sean Nyekjaer [Tue, 8 Feb 2022 08:52:13 +0000 (09:52 +0100)]
mtd: rawnand: protect access to rawnand devices while in suspend
commit
8cba323437a49a45756d661f500b324fc2d486fe upstream.
Prevent rawnand access while in a suspended state.
Commit
013e6292aaf5 ("mtd: rawnand: Simplify the locking") allows the
rawnand layer to return errors rather than waiting in a blocking wait.
Tested on a iMX6ULL.
Fixes:
013e6292aaf5 ("mtd: rawnand: Simplify the locking")
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220208085213.1838273-1-sean@geanix.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Miquel Raynal [Thu, 27 Jan 2022 09:18:04 +0000 (10:18 +0100)]
spi: mxic: Fix the transmit path
commit
5fd6739e0df7e320bcac103dfb95fe75941fea17 upstream.
By working with external hardware ECC engines, we figured out that
Under certain circumstances, it is needed for the SPI controller to
check INT_TX_EMPTY and INT_RX_NOT_EMPTY in both receive and transmit
path (not only in the receive path). The delay penalty being
negligible, move this code in the common path.
Fixes:
b942d80b0a39 ("spi: Add MXIC controller driver")
Cc: stable@vger.kernel.org
Suggested-by: Mason Yang <masonccyang@mxic.com.tw>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Zhengxun Li <zhengxunli@mxic.com.tw>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/linux-mtd/20220127091808.1043392-10-miquel.raynal@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Krzysztof Kozlowski [Tue, 11 Jan 2022 20:13:59 +0000 (21:13 +0100)]
pinctrl: samsung: drop pin banks references on error paths
commit
50ebd19e3585b9792e994cfa8cbee8947fe06371 upstream.
The driver iterates over its devicetree children with
for_each_child_of_node() and stores for later found node pointer. This
has to be put in error paths to avoid leak during re-probing.
Fixes:
ab663789d697 ("pinctrl: samsung: Match pin banks with their device nodes")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Chanho Park <chanho61.park@samsung.com>
Link: https://lore.kernel.org/r/20220111201426.326777-2-krzysztof.kozlowski@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alistair Delva [Wed, 19 Jan 2022 23:21:39 +0000 (23:21 +0000)]
remoteproc: Fix count check in rproc_coredump_write()
commit
f89672cc3681952f2d06314981a6b45f8b0045d1 upstream.
Check count for 0, to avoid a potential underflow. Make the check the
same as the one in rproc_recovery_write().
Fixes:
3afdc59e4390 ("remoteproc: Add coredump debugfs entry")
Signed-off-by: Alistair Delva <adelva@google.com>
Cc: Rishabh Bhatnagar <rishabhb@codeaurora.org>
Cc: stable@vger.kernel.org
Cc: Ohad Ben-Cohen <ohad@wizery.com>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Sibi Sankar <sibis@codeaurora.org>
Cc: linux-remoteproc@vger.kernel.org
Cc: kernel-team@android.com
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220119232139.1125908-1-adelva@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chao Yu [Mon, 21 Mar 2022 15:22:11 +0000 (23:22 +0800)]
f2fs: fix to do sanity check on .cp_pack_total_block_count
commit
5b5b4f85b01604389f7a0f11ef180a725bf0e2d4 upstream.
As bughunter reported in bugzilla:
https://bugzilla.kernel.org/show_bug.cgi?id=215709
f2fs may hang when mounting a fuzzed image, the dmesg shows as below:
__filemap_get_folio+0x3a9/0x590
pagecache_get_page+0x18/0x60
__get_meta_page+0x95/0x460 [f2fs]
get_checkpoint_version+0x2a/0x1e0 [f2fs]
validate_checkpoint+0x8e/0x2a0 [f2fs]
f2fs_get_valid_checkpoint+0xd0/0x620 [f2fs]
f2fs_fill_super+0xc01/0x1d40 [f2fs]
mount_bdev+0x18a/0x1c0
f2fs_mount+0x15/0x20 [f2fs]
legacy_get_tree+0x28/0x50
vfs_get_tree+0x27/0xc0
path_mount+0x480/0xaa0
do_mount+0x7c/0xa0
__x64_sys_mount+0x8b/0xe0
do_syscall_64+0x38/0xc0
entry_SYSCALL_64_after_hwframe+0x44/0xae
The root cause is cp_pack_total_block_count field in checkpoint was fuzzed
to one, as calcuated, two cp pack block locates in the same block address,
so then read latter cp pack block, it will block on the page lock due to
the lock has already held when reading previous cp pack block, fix it by
adding sanity check for cp_pack_total_block_count.
Cc: stable@vger.kernel.org
Signed-off-by: Chao Yu <chao.yu@oppo.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Juhyung Park [Tue, 15 Feb 2022 08:27:21 +0000 (17:27 +0900)]
f2fs: quota: fix loop condition at f2fs_quota_sync()
commit
680af5b824a52faa819167628665804a14f0e0df upstream.
cnt should be passed to sb_has_quota_active() instead of type to check
active quota properly.
Moreover, when the type is -1, the compiler with enough inline knowledge
can discard sb_has_quota_active() check altogether, causing a NULL pointer
dereference at the following inode_lock(dqopt->files[cnt]):
[ 2.796010] Unable to handle kernel NULL pointer dereference at virtual address
00000000000000a0
[ 2.796024] Mem abort info:
[ 2.796025] ESR = 0x96000005
[ 2.796028] EC = 0x25: DABT (current EL), IL = 32 bits
[ 2.796029] SET = 0, FnV = 0
[ 2.796031] EA = 0, S1PTW = 0
[ 2.796032] Data abort info:
[ 2.796034] ISV = 0, ISS = 0x00000005
[ 2.796035] CM = 0, WnR = 0
[ 2.796046] user pgtable: 4k pages, 39-bit VAs, pgdp=
00000003370d1000
[ 2.796048] [
00000000000000a0] pgd=
0000000000000000, pud=
0000000000000000
[ 2.796051] Internal error: Oops:
96000005 [#1] PREEMPT SMP
[ 2.796056] CPU: 7 PID: 640 Comm: f2fs_ckpt-259:7 Tainted: G S
5.4.179-arter97-r8-64666-g2f16e087f9d8 #1
[ 2.796057] Hardware name: Qualcomm Technologies, Inc. Lahaina MTP lemonadep (DT)
[ 2.796059] pstate:
80c00005 (Nzcv daif +PAN +UAO)
[ 2.796065] pc : down_write+0x28/0x70
[ 2.796070] lr : f2fs_quota_sync+0x100/0x294
[ 2.796071] sp :
ffffffa3f48ffc30
[ 2.796073] x29:
ffffffa3f48ffc30 x28:
0000000000000000
[ 2.796075] x27:
ffffffa3f6d718b8 x26:
ffffffa415fe9d80
[ 2.796077] x25:
ffffffa3f7290048 x24:
0000000000000001
[ 2.796078] x23:
0000000000000000 x22:
ffffffa3f7290000
[ 2.796080] x21:
ffffffa3f72904a0 x20:
ffffffa3f7290110
[ 2.796081] x19:
ffffffa3f77a9800 x18:
ffffffc020aae038
[ 2.796083] x17:
ffffffa40e38e040 x16:
ffffffa40e38e6d0
[ 2.796085] x15:
ffffffa40e38e6cc x14:
ffffffa40e38e6d0
[ 2.796086] x13:
00000000000004f6 x12:
00162c44ff493000
[ 2.796088] x11:
0000000000000400 x10:
ffffffa40e38c948
[ 2.796090] x9 :
0000000000000000 x8 :
00000000000000a0
[ 2.796091] x7 :
0000000000000000 x6 :
0000d1060f00002a
[ 2.796093] x5 :
ffffffa3f48ff718 x4 :
000000000000000d
[ 2.796094] x3 :
00000000060c0000 x2 :
0000000000000001
[ 2.796096] x1 :
0000000000000000 x0 :
00000000000000a0
[ 2.796098] Call trace:
[ 2.796100] down_write+0x28/0x70
[ 2.796102] f2fs_quota_sync+0x100/0x294
[ 2.796104] block_operations+0x120/0x204
[ 2.796106] f2fs_write_checkpoint+0x11c/0x520
[ 2.796107] __checkpoint_and_complete_reqs+0x7c/0xd34
[ 2.796109] issue_checkpoint_thread+0x6c/0xb8
[ 2.796112] kthread+0x138/0x414
[ 2.796114] ret_from_fork+0x10/0x18
[ 2.796117] Code:
aa0803e0 aa1f03e1 52800022 aa0103e9 (
c8e97d02)
[ 2.796120] ---[ end trace
96e942e8eb6a0b53 ]---
[ 2.800116] Kernel panic - not syncing: Fatal exception
[ 2.800120] SMP: stopping secondary CPUs
Fixes:
9de71ede81e6 ("f2fs: quota: fix potential deadlock")
Cc: <stable@vger.kernel.org> # v5.15+
Signed-off-by: Juhyung Park <qkrwngud825@gmail.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chao Yu [Fri, 4 Feb 2022 03:21:14 +0000 (11:21 +0800)]
f2fs: fix to unlock page correctly in error path of is_alive()
commit
6d18762ed5cd549fde74fd0e05d4d87bac5a3beb upstream.
As Pavel Machek reported in below link [1]:
After commit
77900c45ee5c ("f2fs: fix to do sanity check in is_alive()"),
node page should be unlock via calling f2fs_put_page() in the error path
of is_alive(), otherwise, f2fs may hang when it tries to lock the node
page, fix it.
[1] https://lore.kernel.org/stable/
20220124203637.GA19321@duo.ucw.cz/
Fixes:
77900c45ee5c ("f2fs: fix to do sanity check in is_alive()")
Cc: <stable@vger.kernel.org>
Reported-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Tue, 15 Mar 2022 15:34:06 +0000 (18:34 +0300)]
NFSD: prevent integer overflow on 32 bit systems
commit
23a9dbbe0faf124fc4c139615633b9d12a3a89ef upstream.
On a 32 bit system, the "len * sizeof(*p)" operation can have an
integer overflow.
Cc: stable@vger.kernel.org
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Tue, 15 Mar 2022 10:30:09 +0000 (13:30 +0300)]
NFSD: prevent underflow in nfssvc_decode_writeargs()
commit
184416d4b98509fb4c3d8fc3d6dc1437896cc159 upstream.
Smatch complains:
fs/nfsd/nfsxdr.c:341 nfssvc_decode_writeargs()
warn: no lower bound on 'args->len'
Change the type to unsigned to prevent this issue.
Cc: stable@vger.kernel.org
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
NeilBrown [Tue, 8 Mar 2022 02:42:17 +0000 (13:42 +1100)]
SUNRPC: avoid race between mod_timer() and del_timer_sync()
commit
3848e96edf4788f772d83990022fa7023a233d83 upstream.
xprt_destory() claims XPRT_LOCKED and then calls del_timer_sync().
Both xprt_unlock_connect() and xprt_release() call
->release_xprt()
which drops XPRT_LOCKED and *then* xprt_schedule_autodisconnect()
which calls mod_timer().
This may result in mod_timer() being called *after* del_timer_sync().
When this happens, the timer may fire long after the xprt has been freed,
and run_timer_softirq() will probably crash.
The pairing of ->release_xprt() and xprt_schedule_autodisconnect() is
always called under ->transport_lock. So if we take ->transport_lock to
call del_timer_sync(), we can be sure that mod_timer() will run first
(if it runs at all).
Cc: stable@vger.kernel.org
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gwendal Grignou [Wed, 9 Feb 2022 05:09:47 +0000 (21:09 -0800)]
HID: intel-ish-hid: Use dma_alloc_coherent for firmware update
commit
f97ec5d75e9261a5da78dc28a8955b7cc0c4468b upstream.
Allocating memory with kmalloc and GPF_DMA32 is not allowed, the
allocator will ignore the attribute.
Instead, use dma_alloc_coherent() API as we allocate a small amount of
memory to transfer firmware fragment to the ISH.
On Arcada chromebook, after the patch the warning:
"Unexpected gfp: 0x4 (GFP_DMA32). Fixing up to gfp: 0xcc0 (GFP_KERNEL). Fix your code!"
is gone. The ISH firmware is loaded properly and we can interact with
the ISH:
> ectool --name cros_ish version
...
Build info: arcada_ish_v2.0.3661+
3c1a1c1ae0 2022-02-08 05:37:47 @localhost
Tool version: v2.0.12300-
900b03ec7f 2022-02-08 10:01:48 @localhost
Fixes: commit
91b228107da3 ("HID: intel-ish-hid: ISH firmware loader client driver")
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ang Tien Sung [Wed, 23 Feb 2022 14:41:46 +0000 (08:41 -0600)]
firmware: stratix10-svc: add missing callback parameter on RSU
commit
b850b7a8b369322adf699ef48ceff4d902525c8c upstream.
Fix a bug whereby, the return response of parameter a1 from an
SMC call is not properly set to the callback data during an
INTEL_SIP_SMC_RSU_ERROR command.
Link: https://lore.kernel.org/lkml/20220216081513.28319-1-tien.sung.ang@intel.com
Fixes:
6b50d882d38d ("firmware: add remote status update client support")
Cc: stable@vger.kernel.org
Signed-off-by: Ang Tien Sung <tien.sung.ang@intel.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://lore.kernel.org/r/20220223144146.399263-1-dinguyen@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bagas Sanjaya [Mon, 14 Mar 2022 11:33:29 +0000 (18:33 +0700)]
Documentation: update stable tree link
commit
555d44932c67e617d89bc13c81c7efac5b51fcfa upstream.
The link to stable tree is redirected to
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git. Update
accordingly.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Sasha Levin <sashal@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: stable@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Link: https://lore.kernel.org/r/20220314113329.485372-6-bagasdotme@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bagas Sanjaya [Mon, 14 Mar 2022 11:33:28 +0000 (18:33 +0700)]
Documentation: add link to stable release candidate tree
commit
587d39b260c4d090166314d64be70b1f6a26b0b5 upstream.
There is also stable release candidate tree. Mention it, however with a
warning that the tree is for testing purposes.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Sasha Levin <sashal@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: stable@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Link: https://lore.kernel.org/r/20220314113329.485372-5-bagasdotme@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Biggers [Thu, 13 Jan 2022 20:04:54 +0000 (12:04 -0800)]
KEYS: fix length validation in keyctl_pkey_params_get_2()
commit
c51abd96837f600d8fd940b6ab8e2da578575504 upstream.
In many cases, keyctl_pkey_params_get_2() is validating the user buffer
lengths against the wrong algorithm properties. Fix it to check against
the correct properties.
Probably this wasn't noticed before because for all asymmetric keys of
the "public_key" subtype, max_data_size == max_sig_size == max_enc_size
== max_dec_size. However, this isn't necessarily true for the
"asym_tpm" subtype (it should be, but it's not strictly validated). Of
course, future key types could have different values as well.
Fixes:
00d60fd3b932 ("KEYS: Provide keyctls to drive the new key type ops for asymmetric keys [ver #2]")
Cc: <stable@vger.kernel.org> # v4.20+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jann Horn [Sat, 19 Mar 2022 01:08:37 +0000 (02:08 +0100)]
ptrace: Check PTRACE_O_SUSPEND_SECCOMP permission on PTRACE_SEIZE
commit
ee1fee900537b5d9560e9f937402de5ddc8412f3 upstream.
Setting PTRACE_O_SUSPEND_SECCOMP is supposed to be a highly privileged
operation because it allows the tracee to completely bypass all seccomp
filters on kernels with CONFIG_CHECKPOINT_RESTORE=y. It is only supposed to
be settable by a process with global CAP_SYS_ADMIN, and only if that
process is not subject to any seccomp filters at all.
However, while these permission checks were done on the PTRACE_SETOPTIONS
path, they were missing on the PTRACE_SEIZE path, which also sets
user-specified ptrace flags.
Move the permissions checks out into a helper function and let both
ptrace_attach() and ptrace_setoptions() call it.
Cc: stable@kernel.org
Fixes:
13c4a90119d2 ("seccomp: add ptrace options for suspend/resume")
Signed-off-by: Jann Horn <jannh@google.com>
Link: https://lkml.kernel.org/r/20220319010838.1386861-1-jannh@google.com
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kunihiko Hayashi [Wed, 9 Mar 2022 06:55:18 +0000 (15:55 +0900)]
clk: uniphier: Fix fixed-rate initialization
commit
ca85a66710a8a1f6b0719397225c3e9ee0abb692 upstream.
Fixed-rate clocks in UniPhier don't have any parent clocks, however,
initial data "init.flags" isn't initialized, so it might be determined
that there is a parent clock for fixed-rate clock.
This sets init.flags to zero as initialization.
Cc: <stable@vger.kernel.org>
Fixes:
734d82f4a678 ("clk: uniphier: add core support code for UniPhier clock driver")
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/1646808918-30899-1-git-send-email-hayashi.kunihiko@socionext.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Wed, 2 Feb 2022 11:33:45 +0000 (12:33 +0100)]
greybus: svc: fix an error handling bug in gb_svc_hello()
commit
5f8583a3b7552092582a92e7bbd2153319929ad7 upstream.
Cleanup if gb_svc_queue_deferred_request() fails.
Link: https://lore.kernel.org/r/20220202072016.GA6748@kili
Fixes:
ee2f2074fdb2 ("greybus: svc: reconfig APBridgeA-Switch link to handle required load")
Cc: stable@vger.kernel.org # 4.9
[johan: fix commit summary prefix and rename label ]
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20220202113347.1288-2-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Liam Beguin [Sat, 8 Jan 2022 20:53:06 +0000 (15:53 -0500)]
iio: inkern: make a best effort on offset calculation
commit
ca85123354e1a65a22170286387b4791997fe864 upstream.
iio_convert_raw_to_processed_unlocked() assumes the offset is an
integer. Make a best effort to get a valid offset value for fractional
cases without breaking implicit truncations.
Fixes:
48e44ce0f881 ("iio:inkern: Add function to read the processed value")
Signed-off-by: Liam Beguin <liambeguin@gmail.com>
Reviewed-by: Peter Rosin <peda@axentia.se>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220108205319.2046348-4-liambeguin@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Liam Beguin [Sat, 8 Jan 2022 20:53:05 +0000 (15:53 -0500)]
iio: inkern: apply consumer scale when no channel scale is available
commit
14b457fdde38de594a4bc4bd9075019319d978da upstream.
When a consumer calls iio_read_channel_processed() and no channel scale
is available, it's assumed that the scale is one and the raw value is
returned as expected.
On the other hand, if the consumer calls iio_convert_raw_to_processed()
the scaling factor requested by the consumer is not applied.
This for example causes the consumer to process mV when expecting uV.
Make sure to always apply the scaling factor requested by the consumer.
Fixes:
adc8ec5ff183 ("iio: inkern: pass through raw values if no scaling")
Signed-off-by: Liam Beguin <liambeguin@gmail.com>
Reviewed-by: Peter Rosin <peda@axentia.se>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220108205319.2046348-3-liambeguin@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Liam Beguin [Sat, 8 Jan 2022 20:53:04 +0000 (15:53 -0500)]
iio: inkern: apply consumer scale on IIO_VAL_INT cases
commit
1bca97ff95c732a516ebb68da72814194980e0a5 upstream.
When a consumer calls iio_read_channel_processed() and the channel has
an integer scale, the scale channel scale is applied and the processed
value is returned as expected.
On the other hand, if the consumer calls iio_convert_raw_to_processed()
the scaling factor requested by the consumer is not applied.
This for example causes the consumer to process mV when expecting uV.
Make sure to always apply the scaling factor requested by the consumer.
Fixes:
48e44ce0f881 ("iio:inkern: Add function to read the processed value")
Signed-off-by: Liam Beguin <liambeguin@gmail.com>
Reviewed-by: Peter Rosin <peda@axentia.se>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220108205319.2046348-2-liambeguin@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Liam Beguin [Sat, 8 Jan 2022 20:53:07 +0000 (15:53 -0500)]
iio: afe: rescale: use s64 for temporary scale calculations
commit
51593106b608ae4247cc8da928813347da16d025 upstream.
All four scaling coefficients can take signed values.
Make tmp a signed 64-bit integer and switch to div_s64() to preserve
signs during 64-bit divisions.
Fixes:
8b74816b5a9a ("iio: afe: rescale: new driver")
Signed-off-by: Liam Beguin <liambeguin@gmail.com>
Reviewed-by: Peter Rosin <peda@axentia.se>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220108205319.2046348-5-liambeguin@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
James Clark [Thu, 20 Jan 2022 11:30:47 +0000 (11:30 +0000)]
coresight: Fix TRCCONFIGR.QE sysfs interface
commit
ea75a342aed5ed72c87f38fbe0df2f5df7eae374 upstream.
It's impossible to program a valid value for TRCCONFIGR.QE
when TRCIDR0.QSUPP==0b10. In that case the following is true:
Q element support is implemented, and only supports Q elements without
instruction counts. TRCCONFIGR.QE can only take the values 0b00 or 0b11.
Currently the low bit of QSUPP is checked to see if the low bit of QE can
be written to, but as you can see when QSUPP==0b10 the low bit is cleared
making it impossible to ever write the only valid value of 0b11 to QE.
0b10 would be written instead, which is a reserved QE value even for all
values of QSUPP.
The fix is to allow writing the low bit of QE for any non zero value of
QSUPP.
This change also ensures that the low bit is always set, even when the
user attempts to only set the high bit.
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Fixes:
d8c66962084f ("coresight-etm4x: Controls pertaining to the reset, mode, pe and events")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220120113047.2839622-2-james.clark@arm.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexander Usyskin [Tue, 8 Mar 2022 09:59:26 +0000 (11:59 +0200)]
mei: avoid iterator usage outside of list_for_each_entry
commit
c10187b1c5ebb8681ca467ab7b0ded5ea415d258 upstream.
Usage of the iterator outside of the list_for_each_entry
is considered harmful. https://lkml.org/lkml/2022/2/17/1032
Do not reference the loop variable outside of the loop,
by rearranging the orders of execution.
Instead of performing search loop and checking outside the loop
if the end of the list was hit and no matching element was found,
the execution is performed inside the loop upon a successful match
followed by a goto statement to the next step,
therefore no condition has to be performed after the loop has ended.
Cc: <stable@vger.kernel.org>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20220308095926.300412-1-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexander Usyskin [Tue, 1 Mar 2022 07:11:15 +0000 (09:11 +0200)]
mei: me: add Alder Lake N device id.
commit
7bbbd0845818cffa9fa8ccfe52fa1cad58e7e4f2 upstream.
Add Alder Lake N device ID.
Cc: <stable@vger.kernel.org>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20220301071115.96145-1-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Anssi Hannula [Thu, 3 Mar 2022 11:08:57 +0000 (13:08 +0200)]
xhci: fix uninitialized string returned by xhci_decode_ctrl_ctx()
commit
05519b8589a679edb8fa781259893d20bece04ad upstream.
xhci_decode_ctrl_ctx() returns the untouched buffer as-is if both "drop"
and "add" parameters are zero.
Fix the function to return an empty string in that case.
It was not immediately clear from the possible call chains whether this
issue is currently actually triggerable or not.
Note that before commit
4843b4b5ec64 ("xhci: fix even more unsafe memory
usage in xhci tracing") the result effect in the failure case was different
as a static buffer was used here, but the code still worked incorrectly.
Fixes:
90d6d5731da7 ("xhci: Add tracing for input control context")
Cc: stable@vger.kernel.org
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
commit
4843b4b5ec64 ("xhci: fix even more unsafe memory usage in xhci tracing")
Link: https://lore.kernel.org/r/20220303110903.1662404-4-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mathias Nyman [Thu, 3 Mar 2022 11:08:55 +0000 (13:08 +0200)]
xhci: make xhci_handshake timeout for xhci_reset() adjustable
commit
14073ce951b5919da450022c050772902f24f054 upstream.
xhci_reset() timeout was increased from 250ms to 10 seconds in order to
give Renesas 720201 xHC enough time to get ready in probe.
xhci_reset() is called with interrupts disabled in other places, and
waiting for 10 seconds there is not acceptable.
Add a timeout parameter to xhci_reset(), and adjust it back to 250ms
when called from xhci_stop() or xhci_shutdown() where interrupts are
disabled, and successful reset isn't that critical.
This solves issues when deactivating host mode on platforms like SM8450.
For now don't change the timeout if xHC is reset in xhci_resume().
No issues are reported for it, and we need the reset to succeed.
Locking around that reset needs to be revisited later.
Additionally change the signed integer timeout parameter in
xhci_handshake() to a u64 to match the timeout value we pass to
readl_poll_timeout_atomic()
Fixes:
22ceac191211 ("xhci: Increase reset timeout for Renesas 720201 host.")
Cc: stable@vger.kernel.org
Reported-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reported-by: Pavan Kondeti <quic_pkondeti@quicinc.com>
Tested-by: Pavan Kondeti <quic_pkondeti@quicinc.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20220303110903.1662404-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Henry Lin [Thu, 3 Mar 2022 11:08:58 +0000 (13:08 +0200)]
xhci: fix runtime PM imbalance in USB2 resume
commit
70c05e4cf63054cd755ca66c1819327b22cb085f upstream.
A race between system resume and device-initiated resume may result in
runtime PM imbalance on USB2 root hub. If a device-initiated resume
starts and system resume xhci_bus_resume() directs U0 before hub driver
sees the resuming device in RESUME state, device-initiated resume will
not be finished in xhci_handle_usb2_port_link_resume(). In this case,
usb_hcd_end_port_resume() call is missing.
This changes calls usb_hcd_end_port_resume() if resuming device reaches
U0 to keep runtime PM balance.
Fixes:
a231ec41e6f6 ("xhci: refactor U0 link state handling in get_port_status")
Cc: stable@vger.kernel.org
Signed-off-by: Henry Lin <henryl@nvidia.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20220303110903.1662404-5-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Anssi Hannula [Thu, 3 Mar 2022 11:08:56 +0000 (13:08 +0200)]
xhci: fix garbage USBSTS being logged in some cases
commit
3105bc977d7cbf2edc35e24cc7e009686f6e4a56 upstream.
xhci_decode_usbsts() is expected to return a zero-terminated string by
its only caller, xhci_stop_endpoint_command_watchdog(), which directly
logs the return value:
xhci_warn(xhci, "USBSTS:%s\n", xhci_decode_usbsts(str, usbsts));
However, if no recognized bits are set in usbsts, the function will
return without having called any sprintf() and therefore return an
untouched non-zero-terminated caller-provided buffer, causing garbage
to be output to log.
Fix that by always including the raw value in the output.
Note that before commit
4843b4b5ec64 ("xhci: fix even more unsafe memory
usage in xhci tracing") the result effect in the failure case was different
as a static buffer was used here, but the code still worked incorrectly.
Fixes:
9c1aa36efdae ("xhci: Show host status when watchdog triggers and host is assumed dead.")
Cc: stable@vger.kernel.org
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20220303110903.1662404-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alan Stern [Thu, 17 Mar 2022 20:39:10 +0000 (16:39 -0400)]
USB: usb-storage: Fix use of bitfields for hardware data in ene_ub6250.c
commit
1892bf90677abcad7f06e897e308f5c3e3618dd4 upstream.
The kernel test robot found a problem with the ene_ub6250 subdriver in
usb-storage: It uses structures containing bitfields to represent
hardware bits in its SD_STATUS, MS_STATUS, and SM_STATUS bytes. This
is not safe; it presumes a particular bit ordering and it assumes the
compiler will not insert padding, neither of which is guaranteed.
This patch fixes the problem by changing the structures to simple u8
values, with the bitfields replaced by bitmask constants.
CC: <stable@vger.kernel.org>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/YjOcbuU106UpJ/V8@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Xie Yongji [Tue, 26 Oct 2021 14:40:15 +0000 (22:40 +0800)]
virtio-blk: Use blk_validate_block_size() to validate block size
commit
57a13a5b8157d9a8606490aaa1b805bafe6c37e1 upstream.
The block layer can't support a block size larger than
page size yet. And a block size that's too small or
not a power of two won't work either. If a misconfigured
device presents an invalid block size in configuration space,
it will result in the kernel crash something like below:
[ 506.154324] BUG: kernel NULL pointer dereference, address:
0000000000000008
[ 506.160416] RIP: 0010:create_empty_buffers+0x24/0x100
[ 506.174302] Call Trace:
[ 506.174651] create_page_buffers+0x4d/0x60
[ 506.175207] block_read_full_page+0x50/0x380
[ 506.175798] ? __mod_lruvec_page_state+0x60/0xa0
[ 506.176412] ? __add_to_page_cache_locked+0x1b2/0x390
[ 506.177085] ? blkdev_direct_IO+0x4a0/0x4a0
[ 506.177644] ? scan_shadow_nodes+0x30/0x30
[ 506.178206] ? lru_cache_add+0x42/0x60
[ 506.178716] do_read_cache_page+0x695/0x740
[ 506.179278] ? read_part_sector+0xe0/0xe0
[ 506.179821] read_part_sector+0x36/0xe0
[ 506.180337] adfspart_check_ICS+0x32/0x320
[ 506.180890] ? snprintf+0x45/0x70
[ 506.181350] ? read_part_sector+0xe0/0xe0
[ 506.181906] bdev_disk_changed+0x229/0x5c0
[ 506.182483] blkdev_get_whole+0x6d/0x90
[ 506.183013] blkdev_get_by_dev+0x122/0x2d0
[ 506.183562] device_add_disk+0x39e/0x3c0
[ 506.184472] virtblk_probe+0x3f8/0x79b [virtio_blk]
[ 506.185461] virtio_dev_probe+0x15e/0x1d0 [virtio]
So let's use a block layer helper to validate the block size.
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://lore.kernel.org/r/20211026144015.188-5-xieyongji@bytedance.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lino Sanfilippo [Wed, 2 Mar 2022 09:43:53 +0000 (10:43 +0100)]
tpm: fix reference counting for struct tpm_chip
commit
7e0438f83dc769465ee663bb5dcf8cc154940712 upstream.
The following sequence of operations results in a refcount warning:
1. Open device /dev/tpmrm.
2. Remove module tpm_tis_spi.
3. Write a TPM command to the file descriptor opened at step 1.
------------[ cut here ]------------
WARNING: CPU: 3 PID: 1161 at lib/refcount.c:25 kobject_get+0xa0/0xa4
refcount_t: addition on 0; use-after-free.
Modules linked in: tpm_tis_spi tpm_tis_core tpm mdio_bcm_unimac brcmfmac
sha256_generic libsha256 sha256_arm hci_uart btbcm bluetooth cfg80211 vc4
brcmutil ecdh_generic ecc snd_soc_core crc32_arm_ce libaes
raspberrypi_hwmon ac97_bus snd_pcm_dmaengine bcm2711_thermal snd_pcm
snd_timer genet snd phy_generic soundcore [last unloaded: spi_bcm2835]
CPU: 3 PID: 1161 Comm: hold_open Not tainted 5.10.0ls-main-dirty #2
Hardware name: BCM2711
[<
c0410c3c>] (unwind_backtrace) from [<
c040b580>] (show_stack+0x10/0x14)
[<
c040b580>] (show_stack) from [<
c1092174>] (dump_stack+0xc4/0xd8)
[<
c1092174>] (dump_stack) from [<
c0445a30>] (__warn+0x104/0x108)
[<
c0445a30>] (__warn) from [<
c0445aa8>] (warn_slowpath_fmt+0x74/0xb8)
[<
c0445aa8>] (warn_slowpath_fmt) from [<
c08435d0>] (kobject_get+0xa0/0xa4)
[<
c08435d0>] (kobject_get) from [<
bf0a715c>] (tpm_try_get_ops+0x14/0x54 [tpm])
[<
bf0a715c>] (tpm_try_get_ops [tpm]) from [<
bf0a7d6c>] (tpm_common_write+0x38/0x60 [tpm])
[<
bf0a7d6c>] (tpm_common_write [tpm]) from [<
c05a7ac0>] (vfs_write+0xc4/0x3c0)
[<
c05a7ac0>] (vfs_write) from [<
c05a7ee4>] (ksys_write+0x58/0xcc)
[<
c05a7ee4>] (ksys_write) from [<
c04001a0>] (ret_fast_syscall+0x0/0x4c)
Exception stack(0xc226bfa8 to 0xc226bff0)
bfa0:
00000000 000105b4 00000003 beafe664 00000014 00000000
bfc0:
00000000 000105b4 000103f8 00000004 00000000 00000000 b6f9c000 beafe684
bfe0:
0000006c beafe648 0001056c b6eb6944
---[ end trace
d4b8409def9b8b1f ]---
The reason for this warning is the attempt to get the chip->dev reference
in tpm_common_write() although the reference counter is already zero.
Since commit
8979b02aaf1d ("tpm: Fix reference count to main device") the
extra reference used to prevent a premature zero counter is never taken,
because the required TPM_CHIP_FLAG_TPM2 flag is never set.
Fix this by moving the TPM 2 character device handling from
tpm_chip_alloc() to tpm_add_char_device() which is called at a later point
in time when the flag has been set in case of TPM2.
Commit
fdc915f7f719 ("tpm: expose spaces via a device link /dev/tpmrm<n>")
already introduced function tpm_devs_release() to release the extra
reference but did not implement the required put on chip->devs that results
in the call of this function.
Fix this by putting chip->devs in tpm_chip_unregister().
Finally move the new implementation for the TPM 2 handling into a new
function to avoid multiple checks for the TPM_CHIP_FLAG_TPM2 flag in the
good case and error cases.
Cc: stable@vger.kernel.org
Fixes:
fdc915f7f719 ("tpm: expose spaces via a device link /dev/tpmrm<n>")
Fixes:
8979b02aaf1d ("tpm: Fix reference count to main device")
Co-developed-by: Jason Gunthorpe <jgg@ziepe.ca>
Signed-off-by: Jason Gunthorpe <jgg@ziepe.ca>
Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Robin Murphy [Thu, 3 Mar 2022 14:40:08 +0000 (14:40 +0000)]
iommu/iova: Improve 32-bit free space estimate
commit
5b61343b50590fb04a3f6be2cdc4868091757262 upstream.
For various reasons based on the allocator behaviour and typical
use-cases at the time, when the max32_alloc_size optimisation was
introduced it seemed reasonable to couple the reset of the tracked
size to the update of cached32_node upon freeing a relevant IOVA.
However, since subsequent optimisations focused on helping genuine
32-bit devices make best use of even more limited address spaces, it
is now a lot more likely for cached32_node to be anywhere in a "full"
32-bit address space, and as such more likely for space to become
available from IOVAs below that node being freed.
At this point, the short-cut in __cached_rbnode_delete_update() really
doesn't hold up any more, and we need to fix the logic to reliably
provide the expected behaviour. We still want cached32_node to only move
upwards, but we should reset the allocation size if *any* 32-bit space
has become available.
Reported-by: Yunfei Wang <yf.wang@mediatek.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Miles Chen <miles.chen@mediatek.com>
Link: https://lore.kernel.org/r/033815732d83ca73b13c11485ac39336f15c3b40.1646318408.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Cc: Miles Chen <miles.chen@mediatek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Waiman Long [Mon, 3 Jan 2022 02:35:58 +0000 (21:35 -0500)]
locking/lockdep: Avoid potential access of invalid memory in lock_class
commit
61cc4534b6550997c97a03759ab46b29d44c0017 upstream.
It was found that reading /proc/lockdep after a lockdep splat may
potentially cause an access to freed memory if lockdep_unregister_key()
is called after the splat but before access to /proc/lockdep [1]. This
is due to the fact that graph_lock() call in lockdep_unregister_key()
fails after the clearing of debug_locks by the splat process.
After lockdep_unregister_key() is called, the lock_name may be freed
but the corresponding lock_class structure still have a reference to
it. That invalid memory pointer will then be accessed when /proc/lockdep
is read by a user and a use-after-free (UAF) error will be reported if
KASAN is enabled.
To fix this problem, lockdep_unregister_key() is now modified to always
search for a matching key irrespective of the debug_locks state and
zap the corresponding lock class if a matching one is found.
[1] https://lore.kernel.org/lkml/
77f05c15-81b6-bddd-9650-
80d5f23fe330@i-love.sakura.ne.jp/
Fixes:
8b39adbee805 ("locking/lockdep: Make lockdep_unregister_key() honor 'debug_locks' again")
Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Cc: Cheng-Jui Wang <cheng-jui.wang@mediatek.com>
Link: https://lkml.kernel.org/r/20220103023558.1377055-1-longman@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Claudiu Beznea [Fri, 11 Mar 2022 11:17:16 +0000 (13:17 +0200)]
net: dsa: microchip: add spi_device_id tables
[ Upstream commit
e981bc74aefc6a177b50c16cfa7023599799cf74 ]
Add spi_device_id tables to avoid logs like "SPI driver ksz9477-switch
has no spi_device_id".
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Haimin Zhang [Tue, 8 Mar 2022 03:20:28 +0000 (11:20 +0800)]
af_key: add __GFP_ZERO flag for compose_sadb_supported in function pfkey_register
[ Upstream commit
9a564bccb78a76740ea9d75a259942df8143d02c ]
Add __GFP_ZERO flag for compose_sadb_supported in function pfkey_register
to initialize the buffer of supp_skb to fix a kernel-info-leak issue.
1) Function pfkey_register calls compose_sadb_supported to request
a sk_buff. 2) compose_sadb_supported calls alloc_sbk to allocate
a sk_buff, but it doesn't zero it. 3) If auth_len is greater 0, then
compose_sadb_supported treats the memory as a struct sadb_supported and
begins to initialize. But it just initializes the field sadb_supported_len
and field sadb_supported_exttype without field sadb_supported_reserved.
Reported-by: TCS Robot <tcs_robot@tencent.com>
Signed-off-by: Haimin Zhang <tcs_kernel@tencent.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Linus Walleij [Fri, 4 Mar 2022 21:17:33 +0000 (13:17 -0800)]
Input: zinitix - do not report shadow fingers
[ Upstream commit
e941dc13fd3717122207d74539ab95da07ef797f ]
I observed the following problem with the BT404 touch pad
running the Phosh UI:
When e.g. typing on the virtual keyboard pressing "g" would
produce "ggg".
After some analysis it turns out the firmware reports that three
fingers hit that coordinate at the same time, finger 0, 2 and
4 (of the five available 0,1,2,3,4).
DOWN
Zinitix-TS 3-0020: finger 0 down (246, 395)
Zinitix-TS 3-0020: finger 1 up (0, 0)
Zinitix-TS 3-0020: finger 2 down (246, 395)
Zinitix-TS 3-0020: finger 3 up (0, 0)
Zinitix-TS 3-0020: finger 4 down (246, 395)
UP
Zinitix-TS 3-0020: finger 0 up (246, 395)
Zinitix-TS 3-0020: finger 2 up (246, 395)
Zinitix-TS 3-0020: finger 4 up (246, 395)
This is one touch and release: i.e. this is all reported on
touch (down) and release.
There is a field in the struct touch_event called finger_cnt
which is actually a bitmask of the fingers active in the
event.
Rename this field finger_mask as this matches the use contents
better, then use for_each_set_bit() to iterate over just the
fingers that are actally active.
Factor out a finger reporting function zinitix_report_fingers()
to handle all fingers.
Also be more careful in reporting finger down/up: we were
reporting every event with input_mt_report_slot_state(..., true);
but this should only be reported on finger down or move,
not on finger up, so also add code to check p->sub_status
to see what is happening and report correctly.
After this my Zinitix BT404 touchscreen report fingers
flawlessly.
The vendor drive I have notably does not use the "finger_cnt"
and contains obviously incorrect code like this:
if (touch_dev->touch_info.finger_cnt > MAX_SUPPORTED_FINGER_NUM)
touch_dev->touch_info.finger_cnt = MAX_SUPPORTED_FINGER_NUM;
As MAX_SUPPORTED_FINGER_NUM is an ordinal and the field is
a bitmask this seems quite confused.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20220228233017.2270599-1-linus.walleij@linaro.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Biju Das [Wed, 16 Mar 2022 17:53:17 +0000 (17:53 +0000)]
spi: Fix erroneous sgs value with min_t()
[ Upstream commit
ebc4cb43ea5ada3db46c80156fca58a54b9bbca8 ]
While computing sgs in spi_map_buf(), the data type
used in min_t() for max_seg_size is 'unsigned int' where
as that of ctlr->max_dma_len is 'size_t'.
min_t(unsigned int,x,y) gives wrong results if one of x/y is
'size_t'
Consider the below examples on a 64-bit machine (ie size_t is
64-bits, and unsigned int is 32-bit).
case 1) min_t(unsigned int, 5, 0x100000001);
case 2) min_t(size_t, 5, 0x100000001);
Case 1 returns '1', where as case 2 returns '5'. As you can see
the result from case 1 is wrong.
This patch fixes the above issue by using the data type of the
parameters that are used in min_t with maximum data length.
Fixes: commit
1a4e53d2fc4f68aa ("spi: Fix invalid sgs value")
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Suggested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20220316175317.465-1-biju.das.jz@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Bartosz Golaszewski [Tue, 15 Mar 2022 16:52:05 +0000 (17:52 +0100)]
Revert "gpio: Revert regression in sysfs-gpio (gpiolib.c)"
[ Upstream commit
56e337f2cf1326323844927a04e9dbce9a244835 ]
This reverts commit
fc328a7d1fcce263db0b046917a66f3aa6e68719.
This commit - while attempting to fix a regression - has caused a number
of other problems. As the fallout from it is more significant than the
initial problem itself, revert it for now before we find a correct
solution.
Link: https://lore.kernel.org/all/20220314192522.GA3031157@roeck-us.net/
Link: https://lore.kernel.org/stable/20220314155509.552218-1-michael@walle.cc/
Link: https://lore.kernel.org/all/20211217153555.9413-1-marcelo.jimenez@gmail.com/
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Reported-and-bisected-by: Guenter Roeck <linux@roeck-us.net>
Reported-by: Michael Walle <michael@walle.cc>
Cc: Thorsten Leemhuis <linux@leemhuis.info>
Cc: Marcelo Roberto Jimenez <marcelo.jimenez@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Minghao Chi (CGEL ZTE) [Tue, 8 Mar 2022 06:43:09 +0000 (06:43 +0000)]
net:mcf8390: Use platform_get_irq() to get the interrupt
[ Upstream commit
2a760554dcba450d3ad61b32375b50ed6d59a87c ]
It is not recommened to use platform_get_resource(pdev, IORESOURCE_IRQ)
for requesting IRQ's resources any more, as they can be not ready yet in
case of DT-booting.
platform_get_irq() instead is a recommended way for getting IRQ even if
it was not retrieved earlier.
It also makes code simpler because we're getting "int" value right away
and no conversion from resource to int is required.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi (CGEL ZTE) <chi.minghao@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Biju Das [Mon, 7 Mar 2022 18:48:43 +0000 (18:48 +0000)]
spi: Fix invalid sgs value
[ Upstream commit
1a4e53d2fc4f68aa654ad96d13ad042e1a8e8a7d ]
max_seg_size is unsigned int and it can have a value up to 2^32
(for eg:-RZ_DMAC driver sets dma_set_max_seg_size as U32_MAX)
When this value is used in min_t() as an integer type, it becomes
-1 and the value of sgs becomes 0.
Fix this issue by replacing the 'int' data type with 'unsigned int'
in min_t().
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20220307184843.9994-1-biju.das.jz@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Marcelo Roberto Jimenez [Mon, 7 Mar 2022 09:57:24 +0000 (10:57 +0100)]
gpio: Revert regression in sysfs-gpio (gpiolib.c)
[ Upstream commit
fc328a7d1fcce263db0b046917a66f3aa6e68719 ]
Some GPIO lines have stopped working after the patch
commit
2ab73c6d8323f ("gpio: Support GPIO controllers without pin-ranges")
And this has supposedly been fixed in the following patches
commit
89ad556b7f96a ("gpio: Avoid using pin ranges with !PINCTRL")
commit
6dbbf84603961 ("gpiolib: Don't free if pin ranges are not defined")
But an erratic behavior where some GPIO lines work while others do not work
has been introduced.
This patch reverts those changes so that the sysfs-gpio interface works
properly again.
Signed-off-by: Marcelo Roberto Jimenez <marcelo.jimenez@gmail.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zheyu Ma [Sat, 5 Mar 2022 14:55:04 +0000 (14:55 +0000)]
ethernet: sun: Free the coherent when failing in probing
[ Upstream commit
bb77bd31c281f70ec77c9c4f584950a779e05cf8 ]
When the driver fails to register net device, it should free the DMA
region first, and then do other cleanup.
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Stefano Garzarella [Tue, 18 Jan 2022 15:06:31 +0000 (16:06 +0100)]
tools/virtio: fix virtio_test execution
[ Upstream commit
32f1b53fe8f03d962423ba81f8e92af5839814da ]
virtio_test hangs on __vring_new_virtqueue() because `vqs_list_lock`
is not initialized.
Let's initialize it in vdev_info_init().
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20220118150631.167015-1-sgarzare@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Si-Wei Liu [Sat, 15 Jan 2022 00:28:00 +0000 (19:28 -0500)]
vdpa/mlx5: should verify CTRL_VQ feature exists for MQ
[ Upstream commit
30c22f3816ffef8aa21a000e93c4ee1402a6ea65 ]
Per VIRTIO v1.1 specification, section 5.1.3.1 Feature bit requirements:
"VIRTIO_NET_F_MQ Requires VIRTIO_NET_F_CTRL_VQ".
There's assumption in the mlx5_vdpa multiqueue code that MQ must come
together with CTRL_VQ. However, there's nowhere in the upper layer to
guarantee this assumption would hold. Were there an untrusted driver
sending down MQ without CTRL_VQ, it would compromise various spots for
e.g. is_index_valid() and is_ctrl_vq_idx(). Although this doesn't end
up with immediate panic or security loophole as of today's code, the
chance for this to be taken advantage of due to future code change is
not zero.
Harden the crispy assumption by failing the set_driver_features() call
when seeing (MQ && !CTRL_VQ). For that end, verify_min_features() is
renamed to verify_driver_features() to reflect the fact that it now does
more than just validate the minimum features. verify_driver_features()
is now used to accommodate various checks against the driver features
for set_driver_features().
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Link: https://lore.kernel.org/r/1642206481-30721-3-git-send-email-si-wei.liu@oracle.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eli Cohen <elic@nvidia.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Michael S. Tsirkin [Tue, 5 Oct 2021 07:04:10 +0000 (03:04 -0400)]
virtio_console: break out of buf poll on remove
[ Upstream commit
0e7174b9d5877130fec41fb4a16e0c2ee4958d44 ]
A common pattern for device reset is currently:
vdev->config->reset(vdev);
.. cleanup ..
reset prevents new interrupts from arriving and waits for interrupt
handlers to finish.
However if - as is common - the handler queues a work request which is
flushed during the cleanup stage, we have code adding buffers / trying
to get buffers while device is reset. Not good.
This was reproduced by running
modprobe virtio_console
modprobe -r virtio_console
in a loop.
Fix this up by calling virtio_break_device + flush before reset.
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=
1786239
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Daniel Palmer [Tue, 1 Mar 2022 10:43:49 +0000 (19:43 +0900)]
ARM: mstar: Select HAVE_ARM_ARCH_TIMER
[ Upstream commit
ea49432d184a6a09f84461604b7711a4e9f5ec9c ]
The mstar SoCs have an arch timer but HAVE_ARM_ARCH_TIMER wasn't
selected. If MSC313E_TIMER isn't selected then the kernel gets
stuck at boot because there are no timers available.
Signed-off-by: Daniel Palmer <daniel@0x0f.com>
Link: https://lore.kernel.org/r/20220301104349.3040422-1-daniel@0x0f.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Lina Wang [Sat, 26 Feb 2022 07:48:01 +0000 (15:48 +0800)]
xfrm: fix tunnel model fragmentation behavior
[ Upstream commit
4ff2980b6bd2aa6b4ded3ce3b7c0ccfab29980af ]
in tunnel mode, if outer interface(ipv4) is less, it is easily to let
inner IPV6 mtu be less than 1280. If so, a Packet Too Big ICMPV6 message
is received. When send again, packets are fragmentized with 1280, they
are still rejected with ICMPV6(Packet Too Big) by xfrmi_xmit2().
According to RFC4213 Section3.2.2:
if (IPv4 path MTU - 20) is less than 1280
if packet is larger than 1280 bytes
Send ICMPv6 "packet too big" with MTU=1280
Drop packet
else
Encapsulate but do not set the Don't Fragment
flag in the IPv4 header. The resulting IPv4
packet might be fragmented by the IPv4 layer
on the encapsulator or by some router along
the IPv4 path.
endif
else
if packet is larger than (IPv4 path MTU - 20)
Send ICMPv6 "packet too big" with
MTU = (IPv4 path MTU - 20).
Drop packet.
else
Encapsulate and set the Don't Fragment flag
in the IPv4 header.
endif
endif
Packets should be fragmentized with ipv4 outer interface, so change it.
After it is fragemtized with ipv4, there will be double fragmenation.
No.48 & No.51 are ipv6 fragment packets, No.48 is double fragmentized,
then tunneled with IPv4(No.49& No.50), which obey spec. And received peer
cannot decrypt it rightly.
48 2002::10 2002::11 1296(length) IPv6 fragment (off=0 more=y ident=0xa20da5bc nxt=50)
49 0x0000 (0) 2002::10 2002::11 1304 IPv6 fragment (off=0 more=y ident=0x7448042c nxt=44)
50 0x0000 (0) 2002::10 2002::11 200 ESP (SPI=0x00035000)
51 2002::10 2002::11 180 Echo (ping) request
52 0x56dc 2002::10 2002::11 248 IPv6 fragment (off=1232 more=n ident=0xa20da5bc nxt=50)
xfrm6_noneed_fragment has fixed above issues. Finally, it acted like below:
1 0x6206 192.168.1.138 192.168.1.1 1316 Fragmented IP protocol (proto=Encap Security Payload 50, off=0, ID=6206) [Reassembled in #2]
2 0x6206 2002::10 2002::11 88 IPv6 fragment (off=0 more=y ident=0x1f440778 nxt=50)
3 0x0000 2002::10 2002::11 248 ICMPv6 Echo (ping) request
Signed-off-by: Lina Wang <lina.wang@mediatek.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Lucas Zampieri [Wed, 26 Jan 2022 14:44:00 +0000 (11:44 -0300)]
HID: logitech-dj: add new lightspeed receiver id
[ Upstream commit
25666e8ccd952627899b09b68f7c9b68cfeaf028 ]
As of logitech lightspeed receiver fw version 04.02.B0009,
HIDPP_PARAM_DEVICE_INFO is being reported as 0x11.
With patch "HID: logitech-dj: add support for the new lightspeed receiver
iteration", the mouse starts to error out with:
logitech-djreceiver: unusable device of type UNKNOWN (0x011) connected on
slot 1
and becomes unusable.
This has been noticed on a Logitech G Pro X Superlight fw MPM 25.01.B0018.
Signed-off-by: Lucas Zampieri <lzampier@redhat.com>
Acked-by: Nestor Lopez Casado <nlopezcasad@logitech.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yajun Deng [Thu, 5 Aug 2021 11:54:34 +0000 (19:54 +0800)]
netdevice: add the case if dev is NULL
commit
b37a466837393af72fe8bcb8f1436410f3f173f3 upstream.
Add the case if dev is NULL in dev_{put, hold}, so the caller doesn't
need to care whether dev is NULL or not.
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Pavel Machek <pavel@denx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Randy Dunlap [Fri, 26 Nov 2021 02:33:16 +0000 (18:33 -0800)]
hv: utils: add PTP_1588_CLOCK to Kconfig to fix build
commit
1dc2f2b81a6a9895da59f3915760f6c0c3074492 upstream.
The hyperv utilities use PTP clock interfaces and should depend a
a kconfig symbol such that they will be built as a loadable module or
builtin so that linker errors do not happen.
Prevents these build errors:
ld: drivers/hv/hv_util.o: in function `hv_timesync_deinit':
hv_util.c:(.text+0x37d): undefined reference to `ptp_clock_unregister'
ld: drivers/hv/hv_util.o: in function `hv_timesync_init':
hv_util.c:(.text+0x738): undefined reference to `ptp_clock_register'
Fixes:
3716a49a81ba ("hv_utils: implement Hyper-V PTP source")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Wei Liu <wei.liu@kernel.org>
Cc: Dexuan Cui <decui@microsoft.com>
Cc: linux-hyperv@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20211126023316.25184-1-rdunlap@infradead.org
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Cc: Petr Štetiar <ynezz@true.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johan Hovold [Mon, 28 Feb 2022 08:49:19 +0000 (09:49 +0100)]
USB: serial: simple: add Nokia phone driver
commit
c4b9c570965f75d0d55e639747f1e5ccdad2fae0 upstream.
Add a new "simple" driver for certain Nokia phones, including Nokia 130
(RM-1035) which exposes two serial ports in "charging only" mode:
Bus 001 Device 009: ID 0421:069a Nokia Mobile Phones 130 [RM-1035] (Charging only)
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x0421 Nokia Mobile Phones
idProduct 0x069a 130 [RM-1035] (Charging only)
bcdDevice 1.00
iManufacturer 1 Nokia
iProduct 2 Nokia 130 (RM-1035)
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 0x0037
bNumInterfaces 2
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Device Status: 0x0000
(Bus Powered)
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220228084919.10656-1-johan@kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eddie James [Tue, 1 Mar 2022 22:44:46 +0000 (16:44 -0600)]
USB: serial: pl2303: add IBM device IDs
commit
e1d15646565b284e9ef2433234d6cfdaf66695f1 upstream.
IBM manufactures a PL2303 device for UPS communications. Add the vendor
and product IDs so that the PL2303 driver binds to the device.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20220301224446.21236-1-eajames@linux.ibm.com
Cc: stable@vger.kernel.org
[ johan: amend the SoB chain ]
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Halil Pasic [Fri, 11 Feb 2022 01:12:52 +0000 (02:12 +0100)]
swiotlb: fix info leak with DMA_FROM_DEVICE
commit
ddbd89deb7d32b1fbb879f48d68fda1a8ac58e8e upstream.
The problem I'm addressing was discovered by the LTP test covering
cve-2018-
1000204.
A short description of what happens follows:
1) The test case issues a command code 00 (TEST UNIT READY) via the SG_IO
interface with: dxfer_len == 524288, dxdfer_dir == SG_DXFER_FROM_DEV
and a corresponding dxferp. The peculiar thing about this is that TUR
is not reading from the device.
2) In sg_start_req() the invocation of blk_rq_map_user() effectively
bounces the user-space buffer. As if the device was to transfer into
it. Since commit
a45b599ad808 ("scsi: sg: allocate with __GFP_ZERO in
sg_build_indirect()") we make sure this first bounce buffer is
allocated with GFP_ZERO.
3) For the rest of the story we keep ignoring that we have a TUR, so the
device won't touch the buffer we prepare as if the we had a
DMA_FROM_DEVICE type of situation. My setup uses a virtio-scsi device
and the buffer allocated by SG is mapped by the function
virtqueue_add_split() which uses DMA_FROM_DEVICE for the "in" sgs (here
scatter-gather and not scsi generics). This mapping involves bouncing
via the swiotlb (we need swiotlb to do virtio in protected guest like
s390 Secure Execution, or AMD SEV).
4) When the SCSI TUR is done, we first copy back the content of the second
(that is swiotlb) bounce buffer (which most likely contains some
previous IO data), to the first bounce buffer, which contains all
zeros. Then we copy back the content of the first bounce buffer to
the user-space buffer.
5) The test case detects that the buffer, which it zero-initialized,
ain't all zeros and fails.
One can argue that this is an swiotlb problem, because without swiotlb
we leak all zeros, and the swiotlb should be transparent in a sense that
it does not affect the outcome (if all other participants are well
behaved).
Copying the content of the original buffer into the swiotlb buffer is
the only way I can think of to make swiotlb transparent in such
scenarios. So let's do just that if in doubt, but allow the driver
to tell us that the whole mapped buffer is going to be overwritten,
in which case we can preserve the old behavior and avoid the performance
impact of the extra bounce.
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Mon, 28 Mar 2022 07:57:11 +0000 (09:57 +0200)]
Linux 5.10.109
Link: https://lore.kernel.org/r/20220325150419.757836392@linuxfoundation.org
Tested-by: Pavel Machek (CIP) <pavel@denx.de>
Tested-by: Fox Chen <foxhlchen@gmail.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Fri, 25 Mar 2022 03:58:27 +0000 (20:58 -0700)]
llc: only change llc->dev when bind() succeeds
commit
2d327a79ee176930dc72c131a970c891d367c1dc upstream.
My latest patch, attempting to fix the refcount leak in a minimal
way turned out to add a new bug.
Whenever the bind operation fails before we attempt to grab
a reference count on a device, we might release the device refcount
of a prior successful bind() operation.
syzbot was not happy about this [1].
Note to stable teams:
Make sure commit
b37a46683739 ("netdevice: add the case if dev is NULL")
is already present in your trees.
[1]
general protection fault, probably for non-canonical address 0xdffffc0000000070: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000380-0x0000000000000387]
CPU: 1 PID: 3590 Comm: syz-executor361 Tainted: G W
5.17.0-syzkaller-04796-g169e77764adc #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:llc_ui_connect+0x400/0xcb0 net/llc/af_llc.c:500
Code: 80 3c 02 00 0f 85 fc 07 00 00 4c 8b a5 38 05 00 00 48 b8 00 00 00 00 00 fc ff df 49 8d bc 24 80 03 00 00 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 a9 07 00 00 49 8b b4 24 80 03 00 00 4c 89 f2 48
RSP: 0018:
ffffc900038cfcc0 EFLAGS:
00010202
RAX:
dffffc0000000000 RBX:
ffff8880756eb600 RCX:
0000000000000000
RDX:
0000000000000070 RSI:
ffffc900038cfe3e RDI:
0000000000000380
RBP:
ffff888015ee5000 R08:
0000000000000001 R09:
ffff888015ee5535
R10:
ffffed1002bdcaa6 R11:
0000000000000000 R12:
0000000000000000
R13:
ffffc900038cfe37 R14:
ffffc900038cfe38 R15:
ffff888015ee5012
FS:
0000555555acd300(0000) GS:
ffff8880b9d00000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
0000000020000280 CR3:
0000000077db6000 CR4:
00000000003506e0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
Call Trace:
<TASK>
__sys_connect_file+0x155/0x1a0 net/socket.c:1900
__sys_connect+0x161/0x190 net/socket.c:1917
__do_sys_connect net/socket.c:1927 [inline]
__se_sys_connect net/socket.c:1924 [inline]
__x64_sys_connect+0x6f/0xb0 net/socket.c:1924
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f016acb90b9
Code: 28 c3 e8 2a 14 00 00 66 2e 0f 1f 84 00 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:
00007ffd417947f8 EFLAGS:
00000246 ORIG_RAX:
000000000000002a
RAX:
ffffffffffffffda RBX:
0000000000000000 RCX:
00007f016acb90b9
RDX:
0000000000000010 RSI:
0000000020000140 RDI:
0000000000000003
RBP:
00007f016ac7d0a0 R08:
0000000000000000 R09:
0000000000000000
R10:
0000000000000000 R11:
0000000000000246 R12:
00007f016ac7d130
R13:
0000000000000000 R14:
0000000000000000 R15:
0000000000000000
</TASK>
Modules linked in:
---[ end trace
0000000000000000 ]---
RIP: 0010:llc_ui_connect+0x400/0xcb0 net/llc/af_llc.c:500
Fixes:
764f4eb6846f ("llc: fix netdevice reference leaks in llc_ui_bind()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: 赵子轩 <beraphin@gmail.com>
Cc: Stoyan Manolov <smanolov@suse.de>
Link: https://lore.kernel.org/r/20220325035827.360418-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann [Mon, 14 Feb 2022 14:48:14 +0000 (15:48 +0100)]
nds32: fix access_ok() checks in get/put_user
commit
8926d88ced46700bf6117ceaf391480b943ea9f4 upstream.
The get_user()/put_user() functions are meant to check for
access_ok(), while the __get_user()/__put_user() functions
don't.
This broke in 4.19 for nds32, when it gained an extraneous
check in __get_user(), but lost the check it needs in
__put_user().
Fixes:
487913ab18c2 ("nds32: Extract the checking and getting pointer to a macro")
Cc: stable@vger.kernel.org @ v4.19+
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bryan O'Donoghue [Tue, 25 Jan 2022 00:40:46 +0000 (00:40 +0000)]
wcn36xx: Differentiate wcn3660 from wcn3620
commit
98d504a82cc75840bec8e3c6ae0e4f411921962b upstream.
The spread of capability between the three WiFi silicon parts wcn36xx
supports is:
wcn3620 - 802.11 a/b/g
wcn3660 - 802.11 a/b/g/n
wcn3680 - 802.11 a/b/g/n/ac
We currently treat wcn3660 as wcn3620 thus limiting it to 2GHz channels.
Fix this regression by ensuring we differentiate between all three parts.
Fixes:
8490987bdb9a ("wcn36xx: Hook and identify RF_IRIS_WCN3680")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220125004046.4058284-1-bryan.odonoghue@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
James Bottomley [Mon, 7 Mar 2022 20:58:03 +0000 (15:58 -0500)]
tpm: use try_get_ops() in tpm-space.c
commit
fb5abce6b2bb5cb3d628aaa63fa821da8c4600f9 upstream.
As part of the series conversion to remove nested TPM operations:
https://lore.kernel.org/all/
20190205224723.19671-1-jarkko.sakkinen@linux.intel.com/
exposure of the chip->tpm_mutex was removed from much of the upper
level code. In this conversion, tpm2_del_space() was missed. This
didn't matter much because it's usually called closely after a
converted operation, so there's only a very tiny race window where the
chip can be removed before the space flushing is done which causes a
NULL deref on the mutex. However, there are reports of this window
being hit in practice, so fix this by converting tpm2_del_space() to
use tpm_try_get_ops(), which performs all the teardown checks before
acquring the mutex.
Cc: stable@vger.kernel.org # 5.4.x
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linus Lüssing [Thu, 10 Mar 2022 18:35:13 +0000 (19:35 +0100)]
mac80211: fix potential double free on mesh join
commit
4a2d4496e15ea5bb5c8e83b94ca8ca7fb045e7d3 upstream.
While commit
6a01afcf8468 ("mac80211: mesh: Free ie data when leaving
mesh") fixed a memory leak on mesh leave / teardown it introduced a
potential memory corruption caused by a double free when rejoining the
mesh:
ieee80211_leave_mesh()
-> kfree(sdata->u.mesh.ie);
...
ieee80211_join_mesh()
-> copy_mesh_setup()
-> old_ie = ifmsh->ie;
-> kfree(old_ie);
This double free / kernel panics can be reproduced by using wpa_supplicant
with an encrypted mesh (if set up without encryption via "iw" then
ifmsh->ie is always NULL, which avoids this issue). And then calling:
$ iw dev mesh0 mesh leave
$ iw dev mesh0 mesh join my-mesh
Note that typically these commands are not used / working when using
wpa_supplicant. And it seems that wpa_supplicant or wpa_cli are going
through a NETDEV_DOWN/NETDEV_UP cycle between a mesh leave and mesh join
where the NETDEV_UP resets the mesh.ie to NULL via a memcpy of
default_mesh_setup in cfg80211_netdev_notifier_call, which then avoids
the memory corruption, too.
The issue was first observed in an application which was not using
wpa_supplicant but "Senf" instead, which implements its own calls to
nl80211.
Fixing the issue by removing the kfree()'ing of the mesh IE in the mesh
join function and leaving it solely up to the mesh leave to free the
mesh IE.
Cc: stable@vger.kernel.org
Fixes:
6a01afcf8468 ("mac80211: mesh: Free ie data when leaving mesh")
Reported-by: Matthias Kretschmer <mathias.kretschmer@fit.fraunhofer.de>
Signed-off-by: Linus Lüssing <ll@simonwunderlich.de>
Tested-by: Mathias Kretschmer <mathias.kretschmer@fit.fraunhofer.de>
Link: https://lore.kernel.org/r/20220310183513.28589-1-linus.luessing@c0d3.blue
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Paul E. McKenney [Fri, 21 Jan 2022 20:40:08 +0000 (12:40 -0800)]
rcu: Don't deboost before reporting expedited quiescent state
commit
10c535787436d62ea28156a4b91365fd89b5a432 upstream.
Currently rcu_preempt_deferred_qs_irqrestore() releases rnp->boost_mtx
before reporting the expedited quiescent state. Under heavy real-time
load, this can result in this function being preempted before the
quiescent state is reported, which can in turn prevent the expedited grace
period from completing. Tim Murray reports that the resulting expedited
grace periods can take hundreds of milliseconds and even more than one
second, when they should normally complete in less than a millisecond.
This was fine given that there were no particular response-time
constraints for synchronize_rcu_expedited(), as it was designed
for throughput rather than latency. However, some users now need
sub-100-millisecond response-time constratints.
This patch therefore follows Neeraj's suggestion (seconded by Tim and
by Uladzislau Rezki) of simply reversing the two operations.
Reported-by: Tim Murray <timmurray@google.com>
Reported-by: Joel Fernandes <joelaf@google.com>
Reported-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Reviewed-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Tested-by: Tim Murray <timmurray@google.com>
Cc: Todd Kjos <tkjos@google.com>
Cc: Sandeep Patil <sspatil@google.com>
Cc: <stable@vger.kernel.org> # 5.4.x
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Brian Norris [Fri, 25 Feb 2022 09:44:32 +0000 (11:44 +0200)]
Revert "ath: add support for special 0x0 regulatory domain"
commit
1ec7ed5163c70a0d040150d2279f932c7e7c143f upstream.
This reverts commit
2dc016599cfa9672a147528ca26d70c3654a5423.
Users are reporting regressions in regulatory domain detection and
channel availability.
The problem this was trying to resolve was fixed in firmware anyway:
QCA6174 hw3.0: sdio-4.4.1: add firmware.bin_WLAN.RMH.4.4.1-00042
https://github.com/kvalo/ath10k-firmware/commit/
4d382787f0efa77dba40394e0bc604f8eff82552
Link: https://bbs.archlinux.org/viewtopic.php?id=254535
Link: http://lists.infradead.org/pipermail/ath10k/2020-April/014871.html
Link: http://lists.infradead.org/pipermail/ath10k/2020-May/015152.html
Link: https://lore.kernel.org/all/1c160dfb-6ccc-b4d6-76f6-4364e0adb6dd@reox.at/
Fixes:
2dc016599cfa ("ath: add support for special 0x0 regulatory domain")
Cc: <stable@vger.kernel.org>
Cc: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20200527165718.129307-1-briannorris@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Giovanni Cabiddu [Fri, 4 Mar 2022 17:54:47 +0000 (17:54 +0000)]
crypto: qat - disable registration of algorithms
commit
8893d27ffcaf6ec6267038a177cb87bcde4dd3de upstream.
The implementations of aead and skcipher in the QAT driver do not
support properly requests with the CRYPTO_TFM_REQ_MAY_BACKLOG flag set.
If the HW queue is full, the driver returns -EBUSY but does not enqueue
the request.
This can result in applications like dm-crypt waiting indefinitely for a
completion of a request that was never submitted to the hardware.
To avoid this problem, disable the registration of all crypto algorithms
in the QAT driver by setting the number of crypto instances to 0 at
configuration time.
Cc: stable@vger.kernel.org
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Werner Sembach [Tue, 15 Mar 2022 19:02:28 +0000 (20:02 +0100)]
ACPI: video: Force backlight native for Clevo NL5xRU and NL5xNU
commit
c844d22fe0c0b37dc809adbdde6ceb6462c43acf upstream.
Clevo NL5xRU and NL5xNU/TUXEDO Aura 15 Gen1 and Gen2 have both a working
native and video interface. However the default detection mechanism first
registers the video interface before unregistering it again and switching
to the native interface during boot. This results in a dangling SBIOS
request for backlight change for some reason, causing the backlight to
switch to ~2% once per boot on the first power cord connect or disconnect
event. Setting the native interface explicitly circumvents this buggy
behaviour by avoiding the unregistering process.
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Maximilian Luz [Sun, 13 Feb 2022 15:49:20 +0000 (16:49 +0100)]
ACPI: battery: Add device HID and quirk for Microsoft Surface Go 3
commit
7dacee0b9efc8bd061f097b1a8d4daa6591af0c6 upstream.
For some reason, the Microsoft Surface Go 3 uses the standard ACPI
interface for battery information, but does not use the standard PNP0C0A
HID. Instead it uses MSHW0146 as identifier. Add that ID to the driver
as this seems to work well.
Additionally, the power state is not updated immediately after the AC
has been (un-)plugged, so add the respective quirk for that.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Cilissen [Mon, 7 Mar 2022 03:16:58 +0000 (04:16 +0100)]
ACPI / x86: Work around broken XSDT on Advantech DAC-BJ01 board
commit
e702196bf85778f2c5527ca47f33ef2e2fca8297 upstream.
On this board the ACPI RSDP structure points to both a RSDT and an XSDT,
but the XSDT points to a truncated FADT. This causes all sorts of trouble
and usually a complete failure to boot after the following error occurs:
ACPI Error: Unsupported address space: 0x20 (*/hwregs-*)
ACPI Error: AE_SUPPORT, Unable to initialize fixed events (*/evevent-*)
ACPI: Unable to start ACPI Interpreter
This leaves the ACPI implementation in such a broken state that subsequent
kernel subsystem initialisations go wrong, resulting in among others
mismapped PCI memory, SATA and USB enumeration failures, and freezes.
As this is an older embedded platform that will likely never see any BIOS
updates to address this issue and its default shipping OS only complies to
ACPI 1.0, work around this by forcing `acpi=rsdt`. This patch, applied on
top of Linux 5.10.102, was confirmed on real hardware to fix the issue.
Signed-off-by: Mark Cilissen <mark@yotsuba.nl>
Cc: All applicable <stable@vger.kernel.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pablo Neira Ayuso [Thu, 17 Mar 2022 11:04:42 +0000 (12:04 +0100)]
netfilter: nf_tables: initialize registers in nft_do_chain()
commit
4c905f6740a365464e91467aa50916555b28213d upstream.
Initialize registers to avoid stack leak into userspace.
Fixes:
96518518cc41 ("netfilter: add nftables")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stephane Graber [Tue, 22 Mar 2022 22:42:06 +0000 (18:42 -0400)]
drivers: net: xgene: Fix regression in CRC stripping
commit
e9e6faeafaa00da1851bcf47912b0f1acae666b4 upstream.
All packets on ingress (except for jumbo) are terminated with a 4-bytes
CRC checksum. It's the responsability of the driver to strip those 4
bytes. Unfortunately a change dating back to March 2017 re-shuffled some
code and made the CRC stripping code effectively dead.
This change re-orders that part a bit such that the datalen is
immediately altered if needed.
Fixes:
4902a92270fb ("drivers: net: xgene: Add workaround for errata 10GE_8/ENET_11")
Cc: stable@vger.kernel.org
Signed-off-by: Stephane Graber <stgraber@ubuntu.com>
Tested-by: Stephane Graber <stgraber@ubuntu.com>
Link: https://lore.kernel.org/r/20220322224205.752795-1-stgraber@ubuntu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Giacomo Guiduzzi [Tue, 22 Mar 2022 20:06:54 +0000 (21:06 +0100)]
ALSA: pci: fix reading of swapped values from pcmreg in AC97 codec
commit
17aaf0193392cb3451bf0ac75ba396ec4cbded6e upstream.
Tests 72 and 78 for ALSA in kselftest fail due to reading
inconsistent values from some devices on a VirtualBox
Virtual Machine using the snd_intel8x0 driver for the AC'97
Audio Controller device.
Taking for example test number 72, this is what the test reports:
"Surround Playback Volume.0 expected 1 but read 0, is_volatile 0"
"Surround Playback Volume.1 expected 0 but read 1, is_volatile 0"
These errors repeat for each value from 0 to 31.
Taking a look at these error messages it is possible to notice
that the written values are read back swapped.
When the write is performed, these values are initially stored in
an array used to sanity-check them and write them in the pcmreg
array. To write them, the two one-byte values are packed together
in a two-byte variable through bitwise operations: the first
value is shifted left by one byte and the second value is stored in the
right byte through a bitwise OR. When reading the values back,
right shifts are performed to retrieve the previously stored
bytes. These shifts are executed in the wrong order, thus
reporting the values swapped as shown above.
This patch fixes this mistake by reversing the read
operations' order.
Signed-off-by: Giacomo Guiduzzi <guiduzzi.giacomo@gmail.com>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220322200653.15862-1-guiduzzi.giacomo@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jonathan Teh [Sun, 13 Mar 2022 19:56:17 +0000 (19:56 +0000)]
ALSA: cmipci: Restore aux vol on suspend/resume
commit
c14231cc04337c2c2a937db084af342ce704dbde upstream.
Save and restore CM_REG_AUX_VOL instead of register 0x24 twice on
suspend/resume.
Tested on CMI8738LX.
Fixes:
cb60e5f5b2b1 ("[ALSA] cmipci - Add PM support")
Signed-off-by: Jonathan Teh <jonathan.teh@outlook.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/DBAPR04MB7366CB3EA9C8521C35C56E8B920E9@DBAPR04MB7366.eurprd04.prod.outlook.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lars-Peter Clausen [Fri, 11 Mar 2022 20:14:00 +0000 (21:14 +0100)]
ALSA: usb-audio: Add mute TLV for playback volumes on RODE NT-USB
commit
0f306cca42fe879694fb5e2382748c43dc9e0196 upstream.
For the RODE NT-USB the lowest Playback mixer volume setting mutes the
audio output. But it is not reported as such causing e.g. PulseAudio to
accidentally mute the device when selecting a low volume.
Fix this by applying the existing quirk for this kind of issue when the
device is detected.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220311201400.235892-1-lars@metafoo.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Tue, 22 Mar 2022 17:13:25 +0000 (18:13 +0100)]
ALSA: pcm: Add stream lock during PCM reset ioctl operations
commit
1f68915b2efd0d6bfd6e124aa63c94b3c69f127c upstream.
snd_pcm_reset() is a non-atomic operation, and it's allowed to run
during the PCM stream running. It implies that the manipulation of
hw_ptr and other parameters might be racy.
This patch adds the PCM stream lock at appropriate places in
snd_pcm_*_reset() actions for covering that.
Cc: <stable@vger.kernel.org>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20220322171325.4355-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Tue, 22 Mar 2022 17:07:20 +0000 (18:07 +0100)]
ALSA: pcm: Fix races among concurrent prealloc proc writes
commit
69534c48ba8ce552ce383b3dfdb271ffe51820c3 upstream.
We have no protection against concurrent PCM buffer preallocation
changes via proc files, and it may potentially lead to UAF or some
weird problem. This patch applies the PCM open_mutex to the proc
write operation for avoiding the racy proc writes and the PCM stream
open (and further operations).
Cc: <stable@vger.kernel.org>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20220322170720.3529-5-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Tue, 22 Mar 2022 17:07:19 +0000 (18:07 +0100)]
ALSA: pcm: Fix races among concurrent prepare and hw_params/hw_free calls
commit
3c3201f8c7bb77eb53b08a3ca8d9a4ddc500b4c0 upstream.
Like the previous fixes to hw_params and hw_free ioctl races, we need
to paper over the concurrent prepare ioctl calls against hw_params and
hw_free, too.
This patch implements the locking with the existing
runtime->buffer_mutex for prepare ioctls. Unlike the previous case
for snd_pcm_hw_hw_params() and snd_pcm_hw_free(), snd_pcm_prepare() is
performed to the linked streams, hence the lock can't be applied
simply on the top. For tracking the lock in each linked substream, we
modify snd_pcm_action_group() slightly and apply the buffer_mutex for
the case stream_lock=false (formerly there was no lock applied)
there.
Cc: <stable@vger.kernel.org>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20220322170720.3529-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Tue, 22 Mar 2022 17:07:18 +0000 (18:07 +0100)]
ALSA: pcm: Fix races among concurrent read/write and buffer changes
commit
dca947d4d26dbf925a64a6cfb2ddbc035e831a3d upstream.
In the current PCM design, the read/write syscalls (as well as the
equivalent ioctls) are allowed before the PCM stream is running, that
is, at PCM PREPARED state. Meanwhile, we also allow to re-issue
hw_params and hw_free ioctl calls at the PREPARED state that may
change or free the buffers, too. The problem is that there is no
protection against those mix-ups.
This patch applies the previously introduced runtime->buffer_mutex to
the read/write operations so that the concurrent hw_params or hw_free
call can no longer interfere during the operation. The mutex is
unlocked before scheduling, so we don't take it too long.
Cc: <stable@vger.kernel.org>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20220322170720.3529-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Tue, 22 Mar 2022 17:07:17 +0000 (18:07 +0100)]
ALSA: pcm: Fix races among concurrent hw_params and hw_free calls
commit
92ee3c60ec9fe64404dc035e7c41277d74aa26cb upstream.
Currently we have neither proper check nor protection against the
concurrent calls of PCM hw_params and hw_free ioctls, which may result
in a UAF. Since the existing PCM stream lock can't be used for
protecting the whole ioctl operations, we need a new mutex to protect
those racy calls.
This patch introduced a new mutex, runtime->buffer_mutex, and applies
it to both hw_params and hw_free ioctl code paths. Along with it, the
both functions are slightly modified (the mmap_count check is moved
into the state-check block) for code simplicity.
Reported-by: Hu Jiahui <kirin.say@gmail.com>
Cc: <stable@vger.kernel.org>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20220322170720.3529-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jason Zheng [Sun, 13 Mar 2022 09:22:16 +0000 (04:22 -0500)]
ALSA: hda/realtek: Add quirk for ASUS GA402
commit
b7557267c233b55d8e8d7ba4c68cf944fe2ec02c upstream.
ASUS GA402 requires a workaround to manage the routing of its 4 speakers
like the other ASUS models. Add a corresponding quirk entry to fix it.
Signed-off-by: Jason Zheng <jasonzheng2004@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220313092216.29858-1-jasonzheng2004@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
huangwenhui [Fri, 11 Mar 2022 09:38:36 +0000 (17:38 +0800)]
ALSA: hda/realtek - Fix headset mic problem for a HP machine with alc671
commit
882bd07f564f97fca6e42ce6ce627ce24ce1ef5a upstream.
On a HP 288 Pro G8, the front mic could not be detected.In order to
get it working, the pin configuration needs to be set correctly, and
the ALC671_FIXUP_HP_HEADSET_MIC2 fixup needs to be applied.
Signed-off-by: huangwenhui <huangwenhuia@uniontech.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220311093836.20754-1-huangwenhuia@uniontech.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tim Crawford [Mon, 7 Mar 2022 19:32:29 +0000 (12:32 -0700)]
ALSA: hda/realtek: Add quirk for Clevo NP50PNJ
commit
9cb727506704b5323998047789fc871e64a6aa14 upstream.
Fixes headset detection on Clevo NP50PNJ.
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220307193229.5141-1-tcrawford@system76.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tim Crawford [Fri, 4 Mar 2022 17:08:40 +0000 (10:08 -0700)]
ALSA: hda/realtek: Add quirk for Clevo NP70PNJ
commit
0c20fce13e6e111463e3a15ce3cf6713fe518388 upstream.
Fixes headset detection on Clevo NP70PNJ.
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220304170840.3351-1-tcrawford@system76.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reza Jahanbakhshi [Fri, 4 Mar 2022 21:23:02 +0000 (22:23 +0100)]
ALSA: usb-audio: add mapping for new Corsair Virtuoso SE
commit
cd94df1795418056a19ff4cb44eadfc18ac99a57 upstream.
New device id for Corsair Virtuoso SE RGB Wireless that currently is not
in the mixer_map. This entry in the mixer_map is necessary in order to
label its mixer appropriately and allow userspace to pick the correct
volume controls. For instance, my own Corsair Virtuoso SE RGB Wireless
headset has this new ID and consequently, the sidetone and volume are not
working correctly without this change.
> sudo lsusb -v | grep -i corsair
Bus 007 Device 011: ID 1b1c:0a40 Corsair CORSAIR VIRTUOSO SE Wireless Gam
idVendor 0x1b1c Corsair
iManufacturer 1 Corsair
iProduct 2 CORSAIR VIRTUOSO SE Wireless Gaming Headset
Signed-off-by: Reza Jahanbakhshi <reza.jahanbakhshi@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220304212303.195949-1-reza.jahanbakhshi@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Fri, 18 Mar 2022 08:20:36 +0000 (09:20 +0100)]
ALSA: oss: Fix PCM OSS buffer allocation overflow
commit
efb6402c3c4a7c26d97c92d70186424097b6e366 upstream.
We've got syzbot reports hitting INT_MAX overflow at vmalloc()
allocation that is called from snd_pcm_plug_alloc(). Although we
apply the restrictions to input parameters, it's based only on the
hw_params of the underlying PCM device. Since the PCM OSS layer
allocates a temporary buffer for the data conversion, the size may
become unexpectedly large when more channels or higher rates is given;
in the reported case, it went over INT_MAX, hence it hits WARN_ON().
This patch is an attempt to avoid such an overflow and an allocation
for too large buffers. First off, it adds the limit of 1MB as the
upper bound for period bytes. This must be large enough for all use
cases, and we really don't want to handle a larger temporary buffer
than this size. The size check is performed at two places, where the
original period bytes is calculated and where the plugin buffer size
is calculated.
In addition, the driver uses array_size() and array3_size() for
multiplications to catch overflows for the converted period size and
buffer bytes.
Reported-by: syzbot+72732c532ac1454eeee9@syzkaller.appspotmail.com
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/00000000000085b1b305da5a66f3@google.com
Link: https://lore.kernel.org/r/20220318082036.29699-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Tue, 15 Mar 2022 16:41:58 +0000 (17:41 +0100)]
ASoC: sti: Fix deadlock via snd_pcm_stop_xrun() call
commit
455c5653f50e10b4f460ef24e99f0044fbe3401c upstream.
This is essentially a revert of the commit
dc865fb9e7c2 ("ASoC: sti:
Use snd_pcm_stop_xrun() helper"), which converted the manual
snd_pcm_stop() calls with snd_pcm_stop_xrun().
The commit above introduced a deadlock as snd_pcm_stop_xrun() itself
takes the PCM stream lock while the caller already holds it. Since
the conversion was done only for consistency reason and the open-call
with snd_pcm_stop() to the XRUN state is a correct usage, let's revert
the commit back as the fix.
Fixes:
dc865fb9e7c2 ("ASoC: sti: Use snd_pcm_stop_xrun() helper")
Reported-by: Daniel Palmer <daniel@0x0f.com>
Cc: Arnaud POULIQUEN <arnaud.pouliquen@st.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220315091319.3351522-1-daniel@0x0f.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Link: https://lore.kernel.org/r/20220315164158.19804-1-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / linux-block.git / log