Merge tag 'drm-misc-next-2023-09-27' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for v6.7-rc1:

UAPI Changes:
- drm_file owner is now updated during use, in the case of a drm fd
  opened by the display server for a client, the correct owner is
  displayed.
- Qaic gains support for the QAIC_DETACH_SLICE_BO ioctl to allow bo
  recycling.

Cross-subsystem Changes:
- Disable boot logo for au1200fb, mmpfb and unexport logo helpers.
  Only fbcon should manage display of logo.
- Update freescale in MAINTAINERS.
- Add some bridge files to bridge in MAINTAINERS.
- Update gma500 driver repo in MAINTAINERS to point to drm-misc.

Core Changes:
- Move size computations to drm buddy allocator.
- Make drm_atomic_helper_shutdown(NULL) a nop.
- Assorted small fixes in drm_debugfs, DP-MST payload addition error handling.
- Fix DRM_BRIDGE_ATTACH_NO_CONNECTOR handling.
- Handle bad (h/v)sync_end in EDID by clipping to htotal.
- Build GPUVM as a module.

Driver Changes:
- Simple drivers don't need to cache prepared result.
- Call drm_atomic_helper_shutdown() in shutdown/unbind for a whole lot
  more drm drivers.
- Assorted small fixes in amdgpu, ssd130x, bridge/it6621, accel/qaic,
  nouveau, tc358768.
- Add NV12 for komeda writeback.
- Add arbitration lost event to synopsis/dw-hdmi-cec.
- Speed up s/r in nouveau by not restoring some big bo's.
- Assorted nouveau display rework in preparation for GSP-RM,
  especially related to how the modeset sequence works and
  the DP sequence in relation to link training.
- Update anx7816 panel.
- Support NVSYNC and NHSYNC in tegra.
- Allow multiple power domains in simple driver.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f1fae5eb-25b8-192a-9a53-215e1184ce81@linux.intel.com

drm/nouveau: uvmm: rename 'umgr' to 'base'

Rename struct drm_gpuvm within struct nouveau_uvmm from 'umgr' to base.

Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230920144343.64830-4-dakr@redhat.com

drm/gpuvm: allow building as module

Currently, the DRM GPUVM does not have any core dependencies preventing
a module build.

Also, new features from subsequent patches require helpers (namely
drm_exec) which can be built as module.

Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230920144343.64830-3-dakr@redhat.com

drm/gpuvm: rename struct drm_gpuva_manager to struct drm_gpuvm

Rename struct drm_gpuva_manager to struct drm_gpuvm including
corresponding functions. This way the GPUVA manager's structures align
very well with the documentation of VM_BIND [1] and VM_BIND locking [2].

It also provides a better foundation for the naming of data structures
and functions introduced for implementing a common dma-resv per GPU-VM
including tracking of external and evicted objects in subsequent
patches.

[1] Documentation/gpu/drm-vm-bind-async.rst
[2] Documentation/gpu/drm-vm-bind-locking.rst

Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Acked-by: Dave Airlie <airlied@redhat.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230920144343.64830-2-dakr@redhat.com

drm/imx/dcss: Call drm_atomic_helper_shutdown() at shutdown time

Based on grepping through the source code this driver appears to be
missing a call to drm_atomic_helper_shutdown() at system shutdown
time. Among other things, this means that if a panel is in use that it
won't be cleanly powered off at system shutdown time.

The fact that we should call drm_atomic_helper_shutdown() in the case
of OS shutdown/restart comes straight out of the kernel doc "driver
instance overview" in drm_drv.c.

Suggested-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
Reviewed-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230921122641.RFT.v2.1.I134336fce7eac5a63bdac46d57b0888858fc8081@changeid

drm/bridge: Add 200ms delay to wait FW HPD status stable

For the no-interrupt design (sink device is panel, polling HPD
status when chip power on), anx7625 FW has more than 200ms HPD
de-bounce time in FW, for the safety to get HPD status, driver
better to wait 200ms before HPD detection after OS resume back.

Signed-off-by: Xin Ji <xji@analogixsemi.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230922093450.3574349-1-xji@analogixsemi.com

drm/simpledrm: Add support for multiple "power-domains"

Multiple power domains need to be handled explicitly in each driver. The
driver core can not handle it automatically since it is not aware of
power sequencing requirements the hardware might have. This is not a
problem for simpledrm since everything is expected to be powered on by
the bootloader. simpledrm has just ensure it remains powered on during
its lifetime.
This is required on Apple silicon M2 and M2 Pro/Max/Ultra desktop
systems. The HDMI output initialized by the bootloader requires keeping
the display controller and a DP phy power domain on.

Signed-off-by: Janne Grunau <j@jannau.net>
Reviewed-by: Eric Curtin <ecurtin@redhat.com>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230912-simpledrm-multiple-power-domains-v2-1-01b66bfb1980@jannau.net

accel/qaic: Add QAIC_DETACH_SLICE_BO IOCTL

Once a BO is attached with slicing configuration that BO can only be used
for that particular setting. With this new feature user can detach slicing
configuration off an already sliced BO and attach new slicing configuration
using QAIC_ATTACH_SLICE_BO.

This will support BO recycling.

detach_slice_bo() detaches slicing configuration from a BO. This new
helper function can also be used in release_dbc() as we are doing the
exact same thing.

Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
[jhugo: add documentation for new ioctl]
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901172247.11410-8-quic_jhugo@quicinc.com

accel/qaic: Create a function to initialize BO

This makes sure that we have a single place to initialize and
re-initialize BO.

Use this new API to cleanup release_dbc()

We will need this for next patch to detach slicing to a BO.

Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901172247.11410-7-quic_jhugo@quicinc.com

accel/qaic: Clean up BO during flushing of transfer list

Variables that are set while adding the corresponding BO in transfer list
should be cleaned when flushing them out of transfer list prematurely.

After this patch we do not need some of the cleanup done in release_dbc()

This patch would also pave the way to have a central location to clean BO,
during an undesired situation.

Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901172247.11410-6-quic_jhugo@quicinc.com

accel/qaic: Undo slicing setup done in qaic_attach_slicing_bo()

qaic_attach_slicing_bo() updates slicing config on BO. Use the existing
function qaic_free_slices_bo() to remove slicing config done in
qaic_attach_slicing_bo().

Use qaic_free_slices_bo() to cleanup release_dbc()

This would be helpful when we introduce a new IOCTL to detach slicing
configuration onto a BO.

Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901172247.11410-5-quic_jhugo@quicinc.com

accel/qaic: Declare BO 'sliced' after all the operations are complete

Once the BO is declared 'sliced' by setting bo->sliced to true we can
perform DMA (QAIC_EXECUTE_BO) operation on that BO. Hence we should
declare a BO sliced after completing all the operations.

Adding BO to its respective DBC list in qaic_attach_slicing_bo() seems
out of place as qaic_attach_slicing_bo() should just update BO with
slicing configuration.

Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901172247.11410-4-quic_jhugo@quicinc.com

accel/qaic: Update BO metadata in a central location

Update/Clean up BO metadata in a central location, this will help maintain
the code and looks cleaner.

Use qaic_unprepare_bo() to cleanup release_dbc()

Next few patches will be implementing detach IOCTL which will leverage
this patch.

Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901172247.11410-3-quic_jhugo@quicinc.com

accel/qaic: Remove ->size field from struct qaic_bo

->size field in struct qaic_bo stores user requested buffer size for
allocate path or size of the dmabuf(PRIME). Now for allocate path driver
allocates a BO of size which is PAGE_SIZE aligned, this size is already
stored in base BO structure (struct drm_gem_object).

So difference is ->size of struct qaic_bo stores the raw value coming from
user and ->size in struct drm_gem_object stores the PAGE_SZIE aligned size.

Do not use ->size from struct qaic_bo for any validation or operation
instead use ->size from struct drm_gem_object since we already have
allocated that much memory then why not use it. Only validate if user
is trying to use more then the BO size. This make the driver more flexible.

After this change ->size field of struct qaic_bo becomes redundant. Remove
it.

Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901172247.11410-2-quic_jhugo@quicinc.com

drm/ssd130x: Drop _helper prefix from struct drm_*_helper_funcs callbacks

The driver uses a naming convention where functions for struct drm_*_funcs
callbacks are named ssd130x_$object_$operation, while the callbacks for
struct drm_*_helper_funcs are named ssd130x_$object_helper_$operation.

The idea is that this helper_ prefix in the function names denote that are
for struct drm_*_helper_funcs callbacks. This convention was copied from
other drivers when ssd130x was written, but Maxime pointed out that is the
exception rather than the norm.

So let's get rid of the _helper prefixes from the function handlers names.

Suggested-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230914195138.1518065-1-javierm@redhat.com

Merge tag 'drm-misc-next-2023-09-11-1' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for v6.7-rc1:

UAPI Changes:
- Nouveau changed to not set NO_PREFETCH flag explicitly.

Cross-subsystem Changes:
- Update documentation of dma-buf intro and uapi.
- fbdev/sbus fixes.
- Use initializer macros in a lot of fbdev drivers.
- Add Boris Brezillon as Panfrost driver maintainer.
- Add Jessica Zhang as drm/panel reviewer.
- Make more fbdev drivers use fb_ops helpers for deferred io.
- Small hid trailing whitespace fix.
- Use fb_ops in hid/picolcd

Core Changes:
- Assorted small fixes to ttm tests, drm/mst.
- Documentation updates to bridge.
- Add kunit tests for some drm_fb functions.
- Rework drm_debugfs implementation.
- Update xe documentation to mark todos as completed.

Driver Changes:
- Add support to rockchip for rv1126 mipi-dsi and vop.
- Assorted small fixes to nouveau, bridge/samsung-dsim,
  bridge/lvds-codec, loongson, rockchip, panfrost, gma500, repaper,
  komeda, virtio, ssd130x.
- Add support for simple panels Mitsubishi AA084XE01,
  JDI LPM102A188A,
- Documentation updates to accel/ivpu.
- Some nouveau scheduling/fence fixes.
- Power management related fixes and other fixes to ivpu.
- Assorted bridge/it66121 fixes.
- Make platform drivers return void in remove() callback.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3da6554b-3b47-fe7d-c4ea-21f4f819dbb6@linux.intel.com

drm/edid: Fixup h/vsync_end instead of h/vtotal

There are some weird EDIDs floating around that have the sync
pulse extending beyond the end of the blanking period.

On the currently problemtic machine (HP Omni 120) EDID reports
the following mode:
"1600x900": 60 108000 1600 1780 1860 1800 900 910 913 1000 0x40 0x5
which is then "corrected" to have htotal=1861 by the current drm_edid.c
code.

The fixup code was originally added in commit 7064fef56369 ("drm: work
around EDIDs with bad htotal/vtotal values"). Googling around we end up in
https://bugs.launchpad.net/ubuntu/hardy/+source/xserver-xorg-video-intel/+bug/297245
where we find an EDID for a Dell Studio 15, which reports:
(II) VESA(0): clock: 65.0 MHz   Image Size:  331 x 207 mm
(II) VESA(0): h_active: 1280  h_sync: 1328  h_sync_end 1360 h_blank_end 1337 h_border: 0
(II) VESA(0): v_active: 800  v_sync: 803  v_sync_end 809 v_blanking: 810 v_border: 0

Note that if we use the hblank size (as opposed of the hsync_end)
from the DTD to determine htotal we get exactly 60Hz refresh rate in
both cases, whereas using hsync_end to determine htotal we get a
slightly lower refresh rates. This makes me believe the using the
hblank size is what was intended even in those cases.

Also note that in case of the HP Onmi 120 the VBIOS boots with these:
  crtc timings: 108000 1600 1780 1860 1800 900 910 913 1000, type: 0x40 flags: 0x5
ie. it just blindly stuffs the bogus hsync_end and htotal from the DTD
into the transcoder timing registers, and the display works. I believe
the (at least more modern) hardware will automagically terminate the hsync
pulse when the timing generator reaches htotal, which again points that we
should use the hblank size to determine htotal. Unfortunatley the old bug
reports for the Dell machines are extremely lacking in useful details so
we have no idea what kind of timings the VBIOS programmed into the
hardware :(

Let's just flip this quirk around and reduce the length of the sync
pulse instead of extending the blanking period. This at least seems
to be the correct thing to do on more modern hardware. And if any
issues crop up on older hardware we need to debug them properly.

v2: Add debug message breadcrumbs (Jani)

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8895
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230920211934.14920-1-ville.syrjala@linux.intel.com

drm/hisilicon/kirin: Call drm_atomic_helper_shutdown() at shutdown/unbind time

Based on grepping through the source code this driver appears to be
missing a call to drm_atomic_helper_shutdown() at system shutdown time
and at driver unbind time. Among other things, this means that if a
panel is in use that it won't be cleanly powered off at system
shutdown time.

The fact that we should call drm_atomic_helper_shutdown() in the case
of OS shutdown/restart and at driver remove (or unbind) time comes
straight out of the kernel doc "driver instance overview" in
drm_drv.c.

I have attempted to put this in the right place at unbind time. In
most other DRM drivers the call is made right after the call to
drm_kms_helper_poll_fini(), so I've put it there. That means that this
call will also be made in the case that we hit errors in bind, since
kirin_drm_kms_cleanup() is called both in the bind error path and in
unbind. I believe this is harmless even though it's not needed in the
bind error path.

For handling shutdown, we rely on the common technique of seeing if
the drvdata is NULL to know whether we need to call
drm_atomic_helper_shutdown(). This makes it important to make sure
that the drvdata is NULL if bind failed or if unbind was called. We
don't need the actual check for NULL and we'll rely on the patch
("drm/atomic-helper: drm_atomic_helper_shutdown(NULL) should be a
noop").

Suggested-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901163944.RFT.6.I21e0916bbd276033f7d31979c0da171458dedd4d@changeid

drm: Call drm_atomic_helper_shutdown() at shutdown/remove time for misc drivers

Based on grepping through the source code these drivers appear to be
missing a call to drm_atomic_helper_shutdown() at system shutdown time
and at driver remove (or unbind) time. Among other things, this means
that if a panel is in use that it won't be cleanly powered off at
system shutdown time.

The fact that we should call drm_atomic_helper_shutdown() in the case
of OS shutdown/restart and at driver remove (or unbind) time comes
straight out of the kernel doc "driver instance overview" in
drm_drv.c.

A few notes about these fixes:
- I confirmed that these drivers were all DRIVER_MODESET type drivers,
  which I believe makes this relevant.
- I confirmed that these drivers were all DRIVER_ATOMIC.
- When adding drm_atomic_helper_shutdown() to the remove/unbind path,
  I added it after drm_kms_helper_poll_fini() when the driver had
  it. This seemed to be what other drivers did. If
  drm_kms_helper_poll_fini() wasn't there I added it straight after
  drm_dev_unregister().
- This patch deals with drivers using the component model in similar
  ways as the patch ("drm: Call drm_atomic_helper_shutdown() at
  shutdown time for misc drivers")
- These fixes rely on the patch ("drm/atomic-helper:
  drm_atomic_helper_shutdown(NULL) should be a noop") to simplify
  shutdown.

Suggested-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> # tilcdc
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901163944.RFT.5.I771eb4bd03d8772b19e7dcfaef3e2c167bce5846@changeid

drm/ssd130x: Call drm_atomic_helper_shutdown() at remove time

Based on grepping through the source code, this driver appears to be
missing a call to drm_atomic_helper_shutdown() at remove time. Let's
add it.

The fact that we should call drm_atomic_helper_shutdown() in the case
of OS driver remove comes straight out of the kernel doc "driver
instance overview" in drm_drv.c.

Suggested-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901163944.RFT.4.I4752a39ad9f8fd08b32c2b78a8a3e40491bfb5eb@changeid

drm/vc4: Call drm_atomic_helper_shutdown() at shutdown time

Based on grepping through the source code these drivers appear to be
missing a call to drm_atomic_helper_shutdown() at system shutdown
time. Among other things, this means that if a panel is in use that it
won't be cleanly powered off at system shutdown time.

The fact that we should call drm_atomic_helper_shutdown() in the case
of OS shutdown/restart comes straight out of the kernel doc "driver
instance overview" in drm_drv.c.

Suggested-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901163944.RFT.3.I10dbe099fb1059d304ba847d19fc45054f7ffe9f@changeid

drm: Call drm_atomic_helper_shutdown() at shutdown time for misc drivers

Based on grepping through the source code these drivers appear to be
missing a call to drm_atomic_helper_shutdown() at system shutdown
time. Among other things, this means that if a panel is in use that it
won't be cleanly powered off at system shutdown time.

The fact that we should call drm_atomic_helper_shutdown() in the case
of OS shutdown/restart comes straight out of the kernel doc "driver
instance overview" in drm_drv.c.

All of the drivers in this patch were fairly straightforward to fix
since they already had a call to drm_atomic_helper_shutdown() at
remove/unbind time but were just lacking one at system shutdown. The
only hitch is that some of these drivers use the component model to
register/unregister their DRM devices. The shutdown callback is part
of the original device. The typical solution here, based on how other
DRM drivers do this, is to keep track of whether the device is bound
based on drvdata. In most cases the drvdata is the drm_device, so we
can just make sure it is NULL when the device is not bound. In some
drivers, this required minor code changes. To make things simpler,
drm_atomic_helper_shutdown() has been modified to consider a NULL
drm_device as a noop in the patch ("drm/atomic-helper:
drm_atomic_helper_shutdown(NULL) should be a noop").

Suggested-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn>
Tested-by: Sui Jingfeng <suijingfeng@loongson.cn>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901163944.RFT.2.I9115e5d094a43e687978b0699cc1fe9f2a3452ea@changeid

drm/armada: Call drm_atomic_helper_shutdown() at shutdown time

Based on grepping through the source code this driver appears to be
missing a call to drm_atomic_helper_shutdown() at system shutdown
time. Among other things, this means that if a panel is in use that it
won't be cleanly powered off at system shutdown time.

The fact that we should call drm_atomic_helper_shutdown() in the case
of OS shutdown/restart comes straight out of the kernel doc "driver
instance overview" in drm_drv.c.

This driver was fairly easy to update. The drm_device is stored in the
drvdata so we just have to make sure the drvdata is NULL whenever the
device is not bound. To make things simpler,
drm_atomic_helper_shutdown() has been modified to consider a NULL
drm_device as a noop in the patch ("drm/atomic-helper:
drm_atomic_helper_shutdown(NULL) should be a noop").

Suggested-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901164111.RFT.1.I3d5598bd73a59b5ded71430736c93f67dc5dea61@changeid

MAINTAINERS: Update gma500 git repo

The GMA500 driver has been handled through drm-misc for a while but the
git repo hasn't been updated. Make sure it points to the right place.

Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230921110038.2613604-1-mripard@kernel.org

drm/bridge: panel: Fix device link for DRM_BRIDGE_ATTACH_NO_CONNECTOR

When external bridges are attached with DRM_BRIDGE_ATTACH_NO_CONNECTOR,
the panel bridge may also get the same flag, but in the .attach()
callback for the panel bridge a device link is added only when this
flag is not present; To make things worse, the .detach() callback
tries to delete the device link unconditionally and without checking
if it was created in the first place, crashing the kernel with a NULL
pointer kernel panic upon calling panel_bridge_detach().

Fix that by moving the device_link_add() call before checking if the
DRM_BRIDGE_ATTACH_NO_CONNECTOR flag is present.

Fixes: 199cf07ebd2b ("drm/bridge: panel: Add a device link between drm device and panel device")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Liu Ying <victor.liu@nxp.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230920082727.57729-1-angelogioacchino.delregno@collabora.com

drm: Update file owner during use

With the typical model where the display server opens the file descriptor
and then hands it over to the client(*), we were showing stale data in
debugfs.

Fix it by updating the drm_file->pid on ioctl access from a different
process.

The field is also made RCU protected to allow for lockless readers. Update
side is protected with dev->filelist_mutex.

Before:

$ cat /sys/kernel/debug/dri/0/clients
             command   pid dev master a   uid      magic
                Xorg  2344   0   y    y     0          0
                Xorg  2344   0   n    y     0          2
                Xorg  2344   0   n    y     0          3
                Xorg  2344   0   n    y     0          4

After:

$ cat /sys/kernel/debug/dri/0/clients
             command  tgid dev master a   uid      magic
                Xorg   830   0   y    y     0          0
       xfce4-session   880   0   n    y     0          1
               xfwm4   943   0   n    y     0          2
           neverball  1095   0   n    y     0          3

*)
More detailed and historically accurate description of various handover
implementation kindly provided by Emil Velikov:

"""
The traditional model, the server was the orchestrator managing the
primary device node. From the fd, to the master status and
authentication. But looking at the fd alone, this has varied across
the years.

IIRC in the DRI1 days, Xorg (libdrm really) would have a list of open
fd(s) and reuse those whenever needed, DRI2 the client was responsible
for open() themselves and with DRI3 the fd was passed to the client.

Around the inception of DRI3 and systemd-logind, the latter became
another possible orchestrator. Whereby Xorg and Wayland compositors
could ask it for the fd. For various reasons (hysterical and genuine
ones) Xorg has a fallback path going the open(), whereas Wayland
compositors are moving to solely relying on logind... some never had
fallback even.

Over the past few years, more projects have emerged which provide
functionality similar (be that on API level, Dbus, or otherwise) to
systemd-logind.
"""

v2:
 * Fixed typo in commit text and added a fine historical explanation
   from Emil.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Tested-by: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230621094824.2348732-1-tvrtko.ursulin@linux.intel.com
Signed-off-by: Christian König <christian.koenig@amd.com>

drm/bridge: tc358768: Attempt to fix DSI horizontal timings

The DSI horizontal timing calculations done by the driver seem to often
lead to underflows or overflows, depending on the videomode.

There are two main things the current driver doesn't seem to get right:
DSI HSW and HFP, and VSDly. However, even following Toshiba's
documentation it seems we don't always get a working display.

This patch attempts to fix the horizontal timings for DSI event mode, and
on a system with a DSI->HDMI encoder, a lot of standard HDMI modes now
seem to work. The work relies on Toshiba's documentation, but also quite
a bit on empirical testing.

This also adds timing related debug prints to make it easier to improve
on this later.

The DSI pulse mode has only been tested with a fixed-resolution panel,
which limits the testing of different modes on DSI pulse mode. However,
as the VSDly calculation also affects pulse mode, so this might cause a
regression.

Reviewed-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Tested-by: Maxim Schwalm <maxim.schwalm@gmail.com> # Asus TF700T
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230906-tc358768-v4-12-31725f008a50@ideasonboard.com

drm/bridge: tc358768: Fix tc358768_ns_to_cnt()

The tc358768_ns_to_cnt() is, most likely, supposed to do a div-round-up
operation, but it misses subtracting one from the dividend.

Fix this by just using DIV_ROUND_UP().

Fixes: ff1ca6397b1d ("drm/bridge: Add tc358768 driver")
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Tested-by: Maxim Schwalm <maxim.schwalm@gmail.com> # Asus TF700T
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230906-tc358768-v4-11-31725f008a50@ideasonboard.com

drm/bridge: tc358768: Clean up clock period code

The driver defines TC358768_PRECISION as 1000, and uses "nsk" to refer
to clock periods. The original author does not remember where all this
came from. Effectively the driver is using picoseconds as the unit for
clock periods, yet referring to them by "nsk".

Clean this up by just saying the periods are in picoseconds.

Reviewed-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Tested-by: Maxim Schwalm <maxim.schwalm@gmail.com> # Asus TF700T
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230906-tc358768-v4-10-31725f008a50@ideasonboard.com

drm/bridge: tc358768: Rename dsibclk to hsbyteclk

The Toshiba documentation talks about HSByteClk when referring to the
DSI HS byte clock, whereas the driver uses 'dsibclk' name. Also, in a
few places the driver calculates the byte clock from the DSI clock, even
if the byte clock is already available in a variable.

To align the driver with the documentation, change the 'dsibclk'
variable to 'hsbyteclk'. This also make it easier to visually separate
'dsibclk' and 'dsiclk' variables.

Reviewed-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Tested-by: Maxim Schwalm <maxim.schwalm@gmail.com> # Asus TF700T
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230906-tc358768-v4-9-31725f008a50@ideasonboard.com

drm/bridge: tc358768: Use dev for dbg prints, not priv->dev

Simplify the code by capturing the priv->dev value to dev variable, and
use it.

Reviewed-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Tested-by: Maxim Schwalm <maxim.schwalm@gmail.com> # Asus TF700T
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230906-tc358768-v4-8-31725f008a50@ideasonboard.com

drm/bridge: tc358768: Print logical values, not raw register values

The driver debug prints DSI related timings as raw register values in
hex. It is much more useful to see the "logical" value of the timing,
not the register value.

Change the prints to print the values separately, in case a single
register contains multiple values, and use %u to have it in a more human
consumable form.

Reviewed-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Tested-by: Maxim Schwalm <maxim.schwalm@gmail.com> # Asus TF700T
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230906-tc358768-v4-7-31725f008a50@ideasonboard.com

drm/bridge: tc358768: Use struct videomode

The TC358768 documentation uses HFP, HBP, etc. values to deal with the
video mode, while the driver currently uses the DRM display mode
(htotal, hsync_start, etc).

Change the driver to convert the DRM display mode to struct videomode,
which then allows us to use the same units the documentation uses. This
makes it much easier to work on the code when using the TC358768
documentation as a reference.

Reviewed-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Tested-by: Maxim Schwalm <maxim.schwalm@gmail.com> # Asus TF700T
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230906-tc358768-v4-6-31725f008a50@ideasonboard.com

drm/bridge: tc358768: Cleanup PLL calculations

As is quite common, some of TC358768's PLL register fields are to be
programmed with (value - 1). Specifically, the FBD and PRD, multiplier
and divider, are such fields.

However, what the driver currently does is that it considers that the
formula used for PLL rate calculation is:

RefClk * [(FBD + 1)/ (PRD + 1)] * [1 / (2^FRS)]

where FBD and PRD are values directly from the registers, while a more
sensible way to look at it is:

RefClk * FBD / PRD * (1 / (2^FRS))

and when the FBD and PRD values are written to the registers, they will
be subtracted by one.

Change the driver accordingly, as it simplifies the PLL code.

Reviewed-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Tested-by: Maxim Schwalm <maxim.schwalm@gmail.com> # Asus TF700T
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230906-tc358768-v4-5-31725f008a50@ideasonboard.com

drm/bridge: tc358768: Fix bit updates

The driver has a few places where it does:

if (thing_is_enabled_in_config)
update_thing_bit_in_hw()

This means that if the thing is _not_ enabled, the bit never gets
cleared. This affects the h/vsyncs and continuous DSI clock bits.

Fix the driver to always update the bit.

Fixes: ff1ca6397b1d ("drm/bridge: Add tc358768 driver")
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Tested-by: Maxim Schwalm <maxim.schwalm@gmail.com> # Asus TF700T
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230906-tc358768-v4-4-31725f008a50@ideasonboard.com

drm/bridge: tc358768: Default to positive h/v syncs

As the TC358768 is a DPI to DSI bridge, the DSI side does not need to
define h/v sync polarities. This means that sometimes we have a mode
without defined sync polarities, which does not work on the DPI side.

Add a mode_fixup hook to default to positive sync polarities.

Reviewed-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Tested-by: Maxim Schwalm <maxim.schwalm@gmail.com> # Asus TF700T
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230906-tc358768-v4-3-31725f008a50@ideasonboard.com

drm/bridge: tc358768: Fix use of uninitialized variable

smatch reports:

drivers/gpu/drm/bridge/tc358768.c:223 tc358768_update_bits() error: uninitialized symbol 'orig'.

Fix this by bailing out from tc358768_update_bits() if the
tc358768_read() produces an error.

Fixes: ff1ca6397b1d ("drm/bridge: Add tc358768 driver")
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Tested-by: Maxim Schwalm <maxim.schwalm@gmail.com> # Asus TF700T
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230906-tc358768-v4-2-31725f008a50@ideasonboard.com

drm/tegra: rgb: Parameterize V- and H-sync polarities

The polarities of the V- and H-sync signals are encoded as flags in the
display mode, so use the existing information to setup the signals for
the RGB interface.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
[tomi.valkeinen@ideasonboard.com: default to positive sync]
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Tested-by: Maxim Schwalm <maxim.schwalm@gmail.com> # Asus TF700T
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230906-tc358768-v4-1-31725f008a50@ideasonboard.com

drm/bridge/analogix/anx78xx: Add missing definition

Analogix ANX78XX driver is missing definitions for anx7816.
It uses the same I2C register set as anx7818.

Signed-off-by: Alicja Michalska <ahplka19@gmail.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/ZPvagaXnQ/TlNEkJ@tora

dt-bindings: display: anx7814: Add definition for anx7816

As requested by Robert Foss <rfoss@kernel.org>, this patch adds
definition for anx7816. It supplements the patch submitted to dri-devel.

Signed-off-by: Alicja Michalska <ahplka19@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/ZQjFabKW7QvrvsnG@tora

drm/nouveau/kms/nv50-: disable dcb parsing

- nvkm should provide all this info now
- preparation for GSP-RM

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Danilo Krummrich <me@dakr.org>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230919220442.202488-45-lyude@redhat.com

drm/nouveau/kms/nv50-: create outputs based on nvkm info

- preparation for GSP-RM

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Danilo Krummrich <me@dakr.org>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230919220442.202488-44-lyude@redhat.com

drm/nouveau/kms/nv50-: create connectors based on nvkm info

- preparation for GSP-RM

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Danilo Krummrich <me@dakr.org>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230919220442.202488-43-lyude@redhat.com

drm/nouveau/kms/nv50-: name aux channels after their connector

- removes use of VBIOS data for naming
- preparation for GSP-RM

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Danilo Krummrich <me@dakr.org>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230919220442.202488-42-lyude@redhat.com

drm/nouveau/kms/nv50-: create heads after outps/conns

- output info will be used later to determine MST support

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Danilo Krummrich <me@dakr.org>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230919220442.202488-41-lyude@redhat.com

drm/nouveau/kms/nv50-: create heads based on nvkm head mask

No need to go poking HW directly, and probably shouldn't on GSP-RM.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Danilo Krummrich <me@dakr.org>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230919220442.202488-40-lyude@redhat.com

drm/nouveau/disp/nv50-: skip DCB_OUTPUT_TV

We've never supported it.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Acked-by: Danilo Krummrich <me@dakr.org>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230919220442.202488-39-lyude@redhat.com

drm/nouveau/disp: move outp init/fini paths to chipset code

- pre-nv5x doesn't use any of this
- preparation for GSP-RM

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Danilo Krummrich <me@dakr.org>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230919220442.202488-38-lyude@redhat.com

drm/nouveau/disp: move outp/conn construction to chipset code

- pre-nv5x doesn't use any of this, has its own version DRM-side
- preparation for GSP-RM

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Danilo Krummrich <me@dakr.org>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230919220442.202488-37-lyude@redhat.com

drm/nouveau/disp: add dp mst id get/put methods

- preparation for GSP-RM

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Danilo Krummrich <me@dakr.org>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230919220442.202488-36-lyude@redhat.com

drm/nouveau/disp: add dp sst config method

This is presently unused on HW, we read a bunch of regs and calculate
the watermark during the second supervisor interrupt.

I don't want to change this yet as I need to re-remember how older HW
works exactly, but RM wants this info via RPC.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Danilo Krummrich <me@dakr.org>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230919220442.202488-35-lyude@redhat.com

drm/nouveau/disp: move link training out of supervisor

- preparation for GSP-RM

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Danilo Krummrich <me@dakr.org>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230919220442.202488-34-lyude@redhat.com

drm/nouveau/disp: add dp train method

- passes DPCD information from DRM to NVKM
- removes NVKM's own sink caps handling
- link still trained from supervisor, more patches to come

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Danilo Krummrich <me@dakr.org>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230919220442.202488-33-lyude@redhat.com

drm/nouveau/kms/nv50-: fixup sink D3 before tearing down link

- fixes bug preventing this on SST
- implement for MST

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Danilo Krummrich <me@dakr.org>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230919220442.202488-32-lyude@redhat.com

drm/nouveau/kms/nv50-: flush mst disables together

- fixes some issues tearing down modes on tiled displays

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Danilo Krummrich <me@dakr.org>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230919220442.202488-31-lyude@redhat.com

drm/nouveau/kms/nv50-: split DP disable+enable into two modesets

Link training can finally be moved out of the supervisor sequence,
but first we need to split DP modesets into separate disable and
enable sequences to be able to perform link training between them
instead.

- preparation for GSP-RM

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Danilo Krummrich <me@dakr.org>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230919220442.202488-30-lyude@redhat.com

drm/nouveau/disp: add dp rates method

- moves building of link rates table from NVKM to DRM
- preparing to move link training out of supervisor

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Danilo Krummrich <me@dakr.org>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230919220442.202488-29-lyude@redhat.com

drm/nouveau/disp: add dp aux xfer method

- preparation for GSP-RM

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Danilo Krummrich <me@dakr.org>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230919220442.202488-28-lyude@redhat.com

drm/nouveau/disp: move dp aux pwr method to HAL

- preparation for GSP-RM

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Danilo Krummrich <me@dakr.org>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230919220442.202488-27-lyude@redhat.com

drm/nouveau/disp: add hdmi audio hal function

This just adds a hook for RM to use, HW paths remain untouched, but
should probably be cleaned up to use this too at some point.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Danilo Krummrich <me@dakr.org>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230919220442.202488-26-lyude@redhat.com

drm/nouveau/disp: add output lvds config method

- was previously part of acquire()

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Danilo Krummrich <me@dakr.org>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230919220442.202488-25-lyude@redhat.com

drm/nouveau/disp: add output backlight control methods

- preparation for GSP-RM

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Danilo Krummrich <me@dakr.org>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230919220442.202488-24-lyude@redhat.com

drm/nouveau/disp: remove SOR routing updates from supervisor

- these shouldn't be necessary now, and are done in acquire()/release()
- preparation for GSP-RM, where we don't control the supervisor

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Danilo Krummrich <me@dakr.org>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230919220442.202488-23-lyude@redhat.com

drm/nouveau/disp: release outputs post-modeset

Prior to this commit, KMS would call release() prior to modeset, and the
second supervisor interrupt would update SOR routing if needed.

Now, KMS will call release() post-modeset and update routing immediately.

- preparation for GSP-RM

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Danilo Krummrich <me@dakr.org>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230919220442.202488-22-lyude@redhat.com

drm/nouveau/disp: move hdmi disable out of release()

- release() is being moved post-modeset, preserve hdmi behaviour for now

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Danilo Krummrich <me@dakr.org>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230919220442.202488-21-lyude@redhat.com

drm/nouveau/disp: add output hdmi config method

- was previously part of acquire()
- preparation for GSP-RM

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Danilo Krummrich <me@dakr.org>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230919220442.202488-20-lyude@redhat.com

drm/nouveau/kms/nv50-: move audio enable post-modeset

- adds tracking for post-UPDATE modeset operations, similar to mst[mo]'s
- audio won't work on RM without this
- we should probably have been doing this anyway

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Danilo Krummrich <me@dakr.org>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230919220442.202488-19-lyude@redhat.com

drm/nouveau/kms/nv50-: keep output state around until modeset complete

- we'll want this info post-UPDATE for later patches

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Danilo Krummrich <me@dakr.org>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230919220442.202488-18-lyude@redhat.com

drm/nouveau/kms/nv50-: remove nv_encoder.audio.connector

- use nv_encoder.conn instead, outp->conn never changes

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Danilo Krummrich <me@dakr.org>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230919220442.202488-17-lyude@redhat.com

drm/nouveau/kms/nv50-: pull some common init out of OR-specific code

- cleanup before additional changes

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Danilo Krummrich <me@dakr.org>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230919220442.202488-16-lyude@redhat.com

drm/nouveau/disp: update SOR routing immediately on acquire()

- was previously delayed until second supervisor interrupt

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Danilo Krummrich <me@dakr.org>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230919220442.202488-15-lyude@redhat.com

drm/nouveau/disp: add acquire_sor/pior()

- preparing to move protocol-specific args out of acquire() again
- avoid re-acquiring acquired output, will matter when enforced later
- sor/pior done at same time due to shared tmds/dp handling

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Danilo Krummrich <me@dakr.org>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230919220442.202488-14-lyude@redhat.com

drm/nouveau/disp: add acquire_dac()

- preparing to move protocol-specific args out of acquire() again
- avoid re-acquiring acquired output, will matter when enforced later
- this one is basically just a rename

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Danilo Krummrich <me@dakr.org>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230919220442.202488-13-lyude@redhat.com

drm/nouveau/disp: shuffle to make upcoming diffs prettier

- preparing to move protocol-specific args out of acquire() again
- no code changes

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Danilo Krummrich <me@dakr.org>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230919220442.202488-12-lyude@redhat.com

drm/nouveau/kms: Add INHERIT ioctl to nvkm/nvif for reading IOR state

Now that we're supporting things like Ada and the GSP, there's situations
where we really need to actually know the display state that we're starting
with when loading the driver in order to prevent breaking GSP expectations.
The first step in doing this is making it so that we can read the current
state of IORs from nvkm in DRM, so that we can fill in said into into the
atomic state.

We do this by introducing an INHERIT ioctl to nvkm/nvif. This is basically
another form of ACQUIRE, except that it will only acquire the given output
path for userspace if it's already set up in hardware. This way, we can go
through and probe each outp object we have in DRM in order to figure out
the current hardware state of each one. If the outp isn't in use, it simply
returns -ENODEV.

This is also part of the work that will be required for implementing GSP
support for display. While the GSP should mostly work without this commit,
this commit should fix some edge case bugs that can occur on initial driver
load. This also paves the way for some of the initial groundwork for
fastboot support.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Acked-by: Danilo Krummrich <me@dakr.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230919220442.202488-11-lyude@redhat.com

drm/nouveau/disp: rename internal output acquire/release functions

These will be made static later in the patch series, after the code that
uses them has been cleaned up in preparation for GSP-RM support.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Danilo Krummrich <me@dakr.org>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230919220442.202488-10-lyude@redhat.com

drm/nouveau/disp: add output method to fetch edid

- needed to support TMDS EDID on RM

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Danilo Krummrich <me@dakr.org>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230919220442.202488-9-lyude@redhat.com

drm/nouveau/disp: add output detect method

This will check the relevant hotplug pin and skip the DDC probe we
currently do if a display is present.

- preparation for GSP-RM.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Danilo Krummrich <me@dakr.org>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230919220442.202488-8-lyude@redhat.com

drm/nouveau/disp: rearrange output methods

- preparation for a bunch of API changes, to make diffs prettier

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Danilo Krummrich <me@dakr.org>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230919220442.202488-7-lyude@redhat.com

drm/nouveau/kms/nv50-: fix mst payload alloc fail crashing evo

Programming -1 (vc_start_slot, if alloc fails) into HW probably isn't
the best idea.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Danilo Krummrich <me@dakr.org>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230919220442.202488-6-lyude@redhat.com

drm/nouveau/mmu/gp100-: always invalidate TLBs at CACHE_LEVEL_ALL

Fixes some issues when running on top of RM.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Danilo Krummrich <me@dakr.org>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230919220442.202488-5-lyude@redhat.com

drm/nouveau/gr/gf100-: lose contents of global ctxbufs across suspend

Some of these buffers are quite large, and there's no need to preserve
them across suspend.

Mark the contents as lost to speedup suspend/resume.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Danilo Krummrich <me@dakr.org>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230919220442.202488-4-lyude@redhat.com

drm/nouveau/imem: support allocations not preserved across suspend

Will initially be used to tag some large grctx allocations which don't
need to be saved, to speedup suspend/resume.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Danilo Krummrich <me@dakr.org>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230919220442.202488-3-lyude@redhat.com

drm/nouveau/devinit/tu102-: remove attempt at loading PreOS

From Turing, HW will already have handled this and locked-down the
falcon before we get control.  So this *should* be a no-op.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Danilo Krummrich <me@dakr.org>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230919220442.202488-2-lyude@redhat.com

drm/dp_mst: Tune down error message during payload addition

If a sink is removed in the middle of payload addition the corresponding
AUX transfer will fail as expected, so tune the error message down to a
debug messge.

Cc: Wayne Lin <Wayne.Lin@amd.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230913223218.540365-3-imre.deak@intel.com

drm/dp_mst: Sanitize error return during payload addition

Return an error during payload addition if the payload port isn't
found. This shouldn't change the behavior since only the i915 driver
checks the return value, printing an error message in case of a failure.

While at it simplify the control flow.

Cc: Wayne Lin <Wayne.Lin@amd.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230913223218.540365-2-imre.deak@intel.com

drm/dp_mst: Fix NULL dereference during payload addition

Fix the NULL dereference leading to the following stack trace:

[  129.687181] i915 0000:00:02.0: [drm:drm_dp_add_payload_part1 [drm_display_helper]] VCPI 1 for port 000000005be4423e not in topology, not creating a payload to remote
[  129.687257] BUG: kernel NULL pointer dereference, address: 0000000000000560
[  129.694276] #PF: supervisor read access in kernel mode
[  129.699459] #PF: error_code(0x0000) - not-present page
[  129.704612] PGD 0 P4D 0
[  129.707178] Oops: 0000 [#1] PREEMPT SMP NOPTI
[  129.711556] CPU: 2 PID: 1623 Comm: Xorg Tainted: G     U             6.6.0-rc1-imre+ #985
[  129.719744] Hardware name: Intel Corporation Alder Lake Client Platform/AlderLake-P DDR5 RVP, BIOS RPLPFWI1.R00.4035.A00.2301200723 01/20/2023
[  129.732509] RIP: 0010:drm_dp_mst_topology_put_port+0x19/0x170 [drm_display_helper]
[  129.740111] Code: 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 55 48 89 e5 41 57 41 56 41 55 41 54 53 48 89 fb 48 83 ec 08 <48> 8b 87 60 05 00 00 44 8b 0f 48 8b 70 58 41 83 e9 01 48 85 f6 74
[  129.758842] RSP: 0018:ffffc90001daf900 EFLAGS: 00010286
[  129.764104] RAX: 0000000000000001 RBX: 0000000000000000 RCX: 0000000000000000
[  129.771246] RDX: 0000000000000000 RSI: ffffffff9e73d613 RDI: 0000000000000000
[  129.778394] RBP: ffffc90001daf930 R08: 0000000000000000 R09: 0000000000000020
[  129.785533] R10: 0000000000ffff10 R11: 000000000000000f R12: ffff888116c65e40
[  129.792680] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
[  129.799822] FS:  00007f39f74b1a80(0000) GS:ffff88840f680000(0000) knlGS:0000000000000000
[  129.807913] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  129.813670] CR2: 0000000000000560 CR3: 0000000138b88000 CR4: 0000000000750ee0
[  129.820815] PKRU: 55555554
[  129.823551] Call Trace:
[  129.826022]  <TASK>
[  129.828154]  ? show_regs+0x65/0x70
[  129.831599]  ? __die+0x24/0x70
[  129.834683]  ? page_fault_oops+0x160/0x480
[  129.838824]  ? dev_printk_emit+0x83/0xb0
[  129.842797]  ? do_user_addr_fault+0x2e2/0x680
[  129.847175]  ? exc_page_fault+0x78/0x180
[  129.851143]  ? asm_exc_page_fault+0x27/0x30
[  129.855353]  ? drm_dp_mst_topology_put_port+0x19/0x170 [drm_display_helper]
[  129.862354]  drm_dp_add_payload_part1+0x85/0x100 [drm_display_helper]
[  129.868832]  intel_mst_pre_enable_dp+0x1ef/0x240 [i915]
[  129.874170]  intel_encoders_pre_enable+0x83/0xa0 [i915]
[  129.879524]  hsw_crtc_enable+0xbe/0x750 [i915]
[  129.884095]  intel_enable_crtc+0x68/0xa0 [i915]
[  129.888752]  skl_commit_modeset_enables+0x2c4/0x5d0 [i915]
[  129.894365]  intel_atomic_commit_tail+0x765/0x1070 [i915]
[  129.899885]  intel_atomic_commit+0x3ba/0x400 [i915]
[  129.904892]  drm_atomic_commit+0x96/0xd0 [drm]
[  129.909405]  ? __pfx___drm_printfn_info+0x10/0x10 [drm]
[  129.914698]  drm_atomic_helper_set_config+0x7e/0xc0 [drm_kms_helper]
[  129.921102]  drm_mode_setcrtc+0x5af/0x8d0 [drm]
[  129.925695]  ? __pfx_drm_mode_setcrtc+0x10/0x10 [drm]
[  129.930810]  drm_ioctl_kernel+0xc4/0x170 [drm]
[  129.935317]  drm_ioctl+0x2a4/0x520 [drm]
[  129.939305]  ? __pfx_drm_mode_setcrtc+0x10/0x10 [drm]
[  129.944415]  ? __fget_light+0xa5/0x110
[  129.948212]  __x64_sys_ioctl+0x98/0xd0
[  129.951985]  do_syscall_64+0x37/0x90
[  129.955581]  entry_SYSCALL_64_after_hwframe+0x6e/0xd8

Fixes: 5aa1dfcdf0a4 ("drm/mst: Refactor the flow for payload allocation/removement")
Cc: Wayne Lin <Wayne.Lin@amd.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230913223218.540365-1-imre.deak@intel.com

drm/bridge: dw-hdmi-cec: Add arbitration lost event

Add handling of arbitration lost event.

Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230909144432.34972-1-jernej.skrabec@gmail.com

Linux 6.6-rc2

Merge tag 'x86-urgent-2023-09-17' of git://git./linux/kernel/git/tip/tip

Pull x86 fixes from Ingo Molnar:
 "Misc fixes:

   - Fix an UV boot crash

   - Skip spurious ENDBR generation on _THIS_IP_

   - Fix ENDBR use in putuser() asm methods

   - Fix corner case boot crashes on 5-level paging

   - and fix a false positive WARNING on LTO kernels"

* tag 'x86-urgent-2023-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/purgatory: Remove LTO flags
  x86/boot/compressed: Reserve more memory for page tables
  x86/ibt: Avoid duplicate ENDBR in __put_user_nocheck*()
  x86/ibt: Suppress spurious ENDBR
  x86/platform/uv: Use alternate source for socket to node data

Merge tag 'sched-urgent-2023-09-17' of git://git./linux/kernel/git/tip/tip

Pull scheduler fixes from Ingo Molnar:
 "Fix a performance regression on large SMT systems, an Intel SMT4
  balancing bug, and a topology setup bug on (Intel) hybrid processors"

* tag 'sched-urgent-2023-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/sched: Restore the SD_ASYM_PACKING flag in the DIE domain
  sched/fair: Fix SMT4 group_smt_balance handling
  sched/fair: Optimize should_we_balance() for large SMT systems

Merge tag 'objtool-urgent-2023-09-17' of git://git./linux/kernel/git/tip/tip

Pull objtool fix from Ingo Molnar:
 "Fix a cold functions related false-positive objtool warning that
  triggers on Clang"

* tag 'objtool-urgent-2023-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  objtool: Fix _THIS_IP_ detection for cold functions

Merge tag 'core-urgent-2023-09-17' of git://git./linux/kernel/git/tip/tip

Pull WARN fix from Ingo Molnar:
 "Fix a missing preempt-enable in the WARN() slowpath"

* tag 'core-urgent-2023-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  panic: Reenable preemption in WARN slowpath

stat: remove no-longer-used helper macros

The choose_32_64() macros were added to deal with an odd inconsistency
between the 32-bit and 64-bit layout of 'struct stat' way back when in
commit a52dd971f947 ("vfs: de-crapify "cp_new_stat()" function").

Then a decade later Mikulas noticed that said inconsistency had been a
mistake in the early x86-64 port, and shouldn't have existed in the
first place.  So commit 932aba1e1690 ("stat: fix inconsistency between
struct stat and struct compat_stat") removed the uses of the helpers.

But the helpers remained around, unused.

Get rid of them.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag '6.6-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6

Pull smb client fixes from Steve French:
 "Three small SMB3 client fixes, one to improve a null check and two
  minor cleanups"

* tag '6.6-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  smb3: fix some minor typos and repeated words
  smb3: correct places where ENOTSUPP is used instead of preferred EOPNOTSUPP
  smb3: move server check earlier when setting channel sequence number

Merge tag '6.6-rc1-ksmbd' of git://git.samba.org/ksmbd

Pull smb server fixes from Steve French:
 "Two ksmbd server fixes"

* tag '6.6-rc1-ksmbd' of git://git.samba.org/ksmbd:
  ksmbd: fix passing freed memory 'aux_payload_buf'
  ksmbd: remove unneeded mark_inode_dirty in set_info_sec()

Merge tag 'ext4_for_linus-6.6-rc2' of git://git./linux/kernel/git/tytso/ext4

Pull ext4 fixes from Ted Ts'o:
 "Regression and bug fixes for ext4"

* tag 'ext4_for_linus-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: fix rec_len verify error
  ext4: do not let fstrim block system suspend
  ext4: move setting of trimmed bit into ext4_try_to_trim_range()
  jbd2: Fix memory leak in journal_init_common()
  jbd2: Remove page size assumptions
  buffer: Make bh_offset() work for compound pages

x86/purgatory: Remove LTO flags

-flto* implies -ffunction-sections. With LTO enabled, ld.lld generates
multiple .text sections for purgatory.ro:

  $ readelf -S purgatory.ro  | grep " .text"
    [ 1] .text             PROGBITS         0000000000000000  00000040
    [ 7] .text.purgatory   PROGBITS         0000000000000000  000020e0
    [ 9] .text.warn        PROGBITS         0000000000000000  000021c0
    [13] .text.sha256_upda PROGBITS         0000000000000000  000022f0
    [15] .text.sha224_upda PROGBITS         0000000000000000  00002be0
    [17] .text.sha256_fina PROGBITS         0000000000000000  00002bf0
    [19] .text.sha224_fina PROGBITS         0000000000000000  00002cc0

This causes WARNING from kexec_purgatory_setup_sechdrs():

  WARNING: CPU: 26 PID: 110894 at kernel/kexec_file.c:919
  kexec_load_purgatory+0x37f/0x390

Fix this by disabling LTO for purgatory.

[ AFAICT, x86 is the only arch that supports LTO and purgatory. ]

We could also fix this with an explicit linker script to rejoin .text.*
sections back into .text. However, given the benefit of LTOing purgatory
is small, simply disable the production of more .text.* sections for now.

Fixes: b33fff07e3e3 ("x86, build: allow LTO to be selected")
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Link: https://lore.kernel.org/r/20230914170138.995606-1-song@kernel.org

x86/boot/compressed: Reserve more memory for page tables

The decompressor has a hard limit on the number of page tables it can
allocate. This limit is defined at compile-time and will cause boot
failure if it is reached.

The kernel is very strict and calculates the limit precisely for the
worst-case scenario based on the current configuration. However, it is
easy to forget to adjust the limit when a new use-case arises. The
worst-case scenario is rarely encountered during sanity checks.

In the case of enabling 5-level paging, a use-case was overlooked. The
limit needs to be increased by one to accommodate the additional level.
This oversight went unnoticed until Aaron attempted to run the kernel
via kexec with 5-level paging and unaccepted memory enabled.

Update wost-case calculations to include 5-level paging.

To address this issue, let's allocate some extra space for page tables.
128K should be sufficient for any use-case. The logic can be simplified
by using a single value for all kernel configurations.

[ Also add a warning, should this memory run low - by Dave Hansen. ]

Fixes: 34bbb0009f3b ("x86/boot/compressed: Enable 5-level paging during decompression stage")
Reported-by: Aaron Lu <aaron.lu@intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230915070221.10266-1-kirill.shutemov@linux.intel.com

Merge tag 'kbuild-fixes-v6.6' of git://git./linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Fix kernel-devel RPM and linux-headers Deb package

 - Fix too long argument list error in 'make modules_install'

* tag 'kbuild-fixes-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kbuild: avoid long argument lists in make modules_install
  kbuild: fix kernel-devel RPM package and linux-headers Deb package