Gavin Shan [Fri, 21 Mar 2025 12:02:22 +0000 (22:02 +1000)]
mm/debug: fix parameter passed to page_mapcount_is_type()
As the comments of page_mapcount_is_type() indicate, the parameter passed
to the function should be one more than page->_mapcount. However,
page->_mapcount is passed to the function by commit
4ffca5a96678 ("mm:
support only one page_type per page") where page_type_has_type() is
replaced by page_mapcount_is_type(), but the parameter isn't adjusted.
Fix the parameter for page_mapcount_is_type() to be (page->__mapcount +
1). Note that the issue doesn't cause any visible impacts due to the
safety gap introduced by PGTY_mapcount_underflow limit.
[akpm@linux-foundation.org: simplify __dump_folio(), per David]
Link: https://lkml.kernel.org/r/20250321120222.1456770-3-gshan@redhat.com
Fixes:
4ffca5a96678 ("mm: support only one page_type per page")
Signed-off-by: Gavin Shan <gshan@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: gehao <gehao@kylinos.cn>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Gavin Shan [Fri, 21 Mar 2025 12:02:21 +0000 (22:02 +1000)]
mm: fix parameter passed to page_mapcount_is_type()
Patch series "Fix parameter passed to page_mapcount_is_type()", v2.
Found by code inspection. There are two places where the parameter passed
to page_mapcount_is_type() is (page->_mapcount), which is incorrect since
it should be one more than the value, as explained in the comments to
page_mapcount_is_type(): (a) page_has_type() in page-flags.h (b)
__dump_folio() in mm/debug.c
PATCH[1] fixes the parameter for (a)
PATCH[2] fixes the parameter for (b)
Note that the issue doesn't cause any visible impacts due to the safety
gap introduced by PGTY_mapcount_underflow limit. So the tag 'Cc:
stable@vger.kernel.org' isn't needed.
This patch (of 2):
As the comments of page_mapcount_is_type() indicate, the parameter passed
to the function should be one more than page->_mapcount. However,
page->_mapcount (equivalent to page->page_type) is passed to the function
by commit
4ffca5a96678 ("mm: support only one page_type per page")
page_type_has_type() is replaced by page_mapcount_is_type(), but the
parameter isn't adjusted.
Fix it by replacing page_mapcount_is_type() with page_type_has_type() in
page_has_type(). Note that the issue doesn't cause any visible impacts
due to the safety gap introduced by PGTY_mapcount_underflow limit.
Link: https://lkml.kernel.org/r/20250321120222.1456770-1-gshan@redhat.com
Link: https://lkml.kernel.org/r/20250321120222.1456770-2-gshan@redhat.com
Fixes:
4ffca5a96678 ("mm: support only one page_type per page")
Signed-off-by: Gavin Shan <gshan@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: gehao <gehao@kylinos.cn>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Andrei Vagin [Mon, 24 Mar 2025 06:53:28 +0000 (06:53 +0000)]
selftests/mm: add PAGEMAP_SCAN guard region test
Add a selftest to verify the PAGEMAP_SCAN ioctl correctly reports guard
regions using the newly introduced PAGE_IS_GUARD flag.
Link: https://lkml.kernel.org/r/20250324065328.107678-4-avagin@google.com
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Andrei Vagin [Mon, 24 Mar 2025 06:53:27 +0000 (06:53 +0000)]
tools headers UAPI: sync linux/fs.h with the kernel sources
Required for a new PAGEMAP_SCAN test to verify guard region reporting.
Link: https://lkml.kernel.org/r/20250324065328.107678-3-avagin@google.com
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Andrei Vagin [Mon, 24 Mar 2025 06:53:26 +0000 (06:53 +0000)]
fs/proc: extend the PAGEMAP_SCAN ioctl to report guard regions
Patch series "fs/proc: extend the PAGEMAP_SCAN ioctl to report guard
regions", v2.
Introduce the PAGE_IS_GUARD flag in the PAGEMAP_SCAN ioctl to expose
information about guard regions. This allows userspace tools, such as
CRIU, to detect and handle guard regions.
Currently, CRIU utilizes PAGEMAP_SCAN as a more efficient alternative to
parsing /proc/pid/pagemap. Without this change, guard regions are
incorrectly reported as swap-anon regions, leading CRIU to attempt dumping
them and subsequently failing.
The series includes updates to the documentation and selftests to reflect
the new functionality.
This patch (of 3):
Introduce the PAGE_IS_GUARD flag in the PAGEMAP_SCAN ioctl to expose
information about guard regions. This allows userspace tools, such as
CRIU, to detect and handle guard regions.
Link: https://lkml.kernel.org/r/20250324065328.107678-1-avagin@google.com
Link: https://lkml.kernel.org/r/20250324065328.107678-2-avagin@google.com
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Sergey Senozhatsky [Tue, 25 Mar 2025 08:04:16 +0000 (17:04 +0900)]
zsmalloc: cleanup headers includes
Remove unused headers includes from zsmalloc and move pagemap.h and
migrate.h includes into zpdesc header.
Link: https://lkml.kernel.org/r/20250325080427.3449359-1-senozhatsky@chromium.org
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Dmitry V. Levin [Mon, 3 Mar 2025 11:20:52 +0000 (13:20 +0200)]
selftests/ptrace: add a test case for PTRACE_SET_SYSCALL_INFO
Check whether PTRACE_SET_SYSCALL_INFO semantics implemented in the kernel
matches userspace expectations.
Link: https://lkml.kernel.org/r/20250303112052.GG24170@strace.io
Signed-off-by: Dmitry V. Levin <ldv@strace.io>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alexey Gladkov (Intel) <legion@kernel.org>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: anton ivanov <anton.ivanov@cambridgegreys.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Brian Cain <bcain@quicinc.com>
Cc: Charlie Jenkins <charlie@rivosinc.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christian Zankel <chris@zankel.net>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Davide Berardi <berardi.dav@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Eugene Syromiatnikov <esyr@redhat.com>
Cc: Eugene Syromyatnikov <evgsyr@gmail.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Maciej W. Rozycki <macro@orcam.me.uk>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Naveen N Rao <naveen@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Renzo Davoi <renzo@cs.unibo.it>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russel King <linux@armlinux.org.uk>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vineet Gupta <vgupta@kernel.org>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Dmitry V. Levin [Mon, 3 Mar 2025 11:20:44 +0000 (13:20 +0200)]
ptrace: introduce PTRACE_SET_SYSCALL_INFO request
PTRACE_SET_SYSCALL_INFO is a generic ptrace API that complements
PTRACE_GET_SYSCALL_INFO by letting the ptracer modify details of system
calls the tracee is blocked in.
This API allows ptracers to obtain and modify system call details in a
straightforward and architecture-agnostic way, providing a consistent way
of manipulating the system call number and arguments across architectures.
As in case of PTRACE_GET_SYSCALL_INFO, PTRACE_SET_SYSCALL_INFO also does
not aim to address numerous architecture-specific system call ABI
peculiarities, like differences in the number of system call arguments for
such system calls as pread64 and preadv.
The current implementation supports changing only those bits of system
call information that are used by strace system call tampering, namely,
syscall number, syscall arguments, and syscall return value.
Support of changing additional details returned by
PTRACE_GET_SYSCALL_INFO, such as instruction pointer and stack pointer,
could be added later if needed, by using struct ptrace_syscall_info.flags
to specify the additional details that should be set. Currently, "flags"
and "reserved" fields of struct ptrace_syscall_info must be initialized
with zeroes; "arch", "instruction_pointer", and "stack_pointer" fields are
currently ignored.
PTRACE_SET_SYSCALL_INFO currently supports only PTRACE_SYSCALL_INFO_ENTRY,
PTRACE_SYSCALL_INFO_EXIT, and PTRACE_SYSCALL_INFO_SECCOMP operations.
Other operations could be added later if needed.
Ideally, PTRACE_SET_SYSCALL_INFO should have been introduced along with
PTRACE_GET_SYSCALL_INFO, but it didn't happen. The last straw that
convinced me to implement PTRACE_SET_SYSCALL_INFO was apparent failure to
provide an API of changing the first system call argument on riscv
architecture.
ptrace(2) man page:
long ptrace(enum __ptrace_request request, pid_t pid, void *addr, void *data);
...
PTRACE_SET_SYSCALL_INFO
Modify information about the system call that caused the stop.
The "data" argument is a pointer to struct ptrace_syscall_info
that specifies the system call information to be set.
The "addr" argument should be set to sizeof(struct ptrace_syscall_info)).
Link: https://lore.kernel.org/all/59505464-c84a-403d-972f-d4b2055eeaac@gmail.com/
Link: https://lkml.kernel.org/r/20250303112044.GF24170@strace.io
Signed-off-by: Dmitry V. Levin <ldv@strace.io>
Reviewed-by: Alexey Gladkov <legion@kernel.org>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Tested-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Eugene Syromiatnikov <esyr@redhat.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: anton ivanov <anton.ivanov@cambridgegreys.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Brian Cain <bcain@quicinc.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christian Zankel <chris@zankel.net>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Davide Berardi <berardi.dav@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Eugene Syromyatnikov <evgsyr@gmail.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Maciej W. Rozycki <macro@orcam.me.uk>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Naveen N Rao <naveen@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Renzo Davoi <renzo@cs.unibo.it>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russel King <linux@armlinux.org.uk>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vineet Gupta <vgupta@kernel.org>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Dmitry V. Levin [Mon, 3 Mar 2025 11:20:38 +0000 (13:20 +0200)]
ptrace_get_syscall_info: factor out ptrace_get_syscall_info_op
Move the code that calculates the type of the system call stop out of
ptrace_get_syscall_info() into a separate function
ptrace_get_syscall_info_op() which is going to be used later to implement
PTRACE_SET_SYSCALL_INFO API.
Link: https://lkml.kernel.org/r/20250303112038.GE24170@strace.io
Signed-off-by: Dmitry V. Levin <ldv@strace.io>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alexey Gladkov (Intel) <legion@kernel.org>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: anton ivanov <anton.ivanov@cambridgegreys.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Brian Cain <bcain@quicinc.com>
Cc: Charlie Jenkins <charlie@rivosinc.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christian Zankel <chris@zankel.net>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Davide Berardi <berardi.dav@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Eugene Syromiatnikov <esyr@redhat.com>
Cc: Eugene Syromyatnikov <evgsyr@gmail.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Maciej W. Rozycki <macro@orcam.me.uk>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Naveen N Rao <naveen@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Renzo Davoi <renzo@cs.unibo.it>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russel King <linux@armlinux.org.uk>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vineet Gupta <vgupta@kernel.org>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Dmitry V. Levin [Mon, 3 Mar 2025 11:20:20 +0000 (13:20 +0200)]
syscall.h: introduce syscall_set_nr()
Similar to syscall_set_arguments() that complements
syscall_get_arguments(), introduce syscall_set_nr() that complements
syscall_get_nr().
syscall_set_nr() is going to be needed along with syscall_set_arguments()
on all HAVE_ARCH_TRACEHOOK architectures to implement
PTRACE_SET_SYSCALL_INFO API.
Link: https://lkml.kernel.org/r/20250303112020.GD24170@strace.io
Signed-off-by: Dmitry V. Levin <ldv@strace.io>
Tested-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Acked-by: Helge Deller <deller@gmx.de> # parisc
Reviewed-by: Maciej W. Rozycki <macro@orcam.me.uk> # mips
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alexey Gladkov (Intel) <legion@kernel.org>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: anton ivanov <anton.ivanov@cambridgegreys.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Brian Cain <bcain@quicinc.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christian Zankel <chris@zankel.net>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Davide Berardi <berardi.dav@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Eugene Syromiatnikov <esyr@redhat.com>
Cc: Eugene Syromyatnikov <evgsyr@gmail.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Naveen N Rao <naveen@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Renzo Davoi <renzo@cs.unibo.it>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russel King <linux@armlinux.org.uk>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vineet Gupta <vgupta@kernel.org>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Dmitry V. Levin [Mon, 3 Mar 2025 11:20:09 +0000 (13:20 +0200)]
syscall.h: add syscall_set_arguments()
This function is going to be needed on all HAVE_ARCH_TRACEHOOK
architectures to implement PTRACE_SET_SYSCALL_INFO API.
This partially reverts commit
7962c2eddbfe ("arch: remove unused function
syscall_set_arguments()") by reusing some of old syscall_set_arguments()
implementations.
[nathan@kernel.org: fix compile time fortify checks]
Link: https://lkml.kernel.org/r/20250408213131.GA2872426@ax162
Link: https://lkml.kernel.org/r/20250303112009.GC24170@strace.io
Signed-off-by: Dmitry V. Levin <ldv@strace.io>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Acked-by: Helge Deller <deller@gmx.de> # parisc
Reviewed-by: Maciej W. Rozycki <macro@orcam.me.uk> [mips]
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alexey Gladkov (Intel) <legion@kernel.org>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: anton ivanov <anton.ivanov@cambridgegreys.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Brian Cain <bcain@quicinc.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christian Zankel <chris@zankel.net>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Davide Berardi <berardi.dav@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Eugene Syromiatnikov <esyr@redhat.com>
Cc: Eugene Syromyatnikov <evgsyr@gmail.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Naveen N Rao <naveen@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Renzo Davoi <renzo@cs.unibo.it>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russel King <linux@armlinux.org.uk>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vineet Gupta <vgupta@kernel.org>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Dmitry V. Levin [Mon, 3 Mar 2025 11:19:53 +0000 (13:19 +0200)]
hexagon: add syscall_set_return_value()
Patch series "ptrace: introduce PTRACE_SET_SYSCALL_INFO API", v7.
PTRACE_SET_SYSCALL_INFO is a generic ptrace API that complements
PTRACE_GET_SYSCALL_INFO by letting the ptracer modify details of system
calls the tracee is blocked in.
This API allows ptracers to obtain and modify system call details in a
straightforward and architecture-agnostic way, providing a consistent way
of manipulating the system call number and arguments across architectures.
As in case of PTRACE_GET_SYSCALL_INFO, PTRACE_SET_SYSCALL_INFO also does
not aim to address numerous architecture-specific system call ABI
peculiarities, like differences in the number of system call arguments for
such system calls as pread64 and preadv.
The current implementation supports changing only those bits of system
call information that are used by strace system call tampering, namely,
syscall number, syscall arguments, and syscall return value.
Support of changing additional details returned by
PTRACE_GET_SYSCALL_INFO, such as instruction pointer and stack pointer,
could be added later if needed, by using struct ptrace_syscall_info.flags
to specify the additional details that should be set. Currently, "flags"
and "reserved" fields of struct ptrace_syscall_info must be initialized
with zeroes; "arch", "instruction_pointer", and "stack_pointer" fields are
currently ignored.
PTRACE_SET_SYSCALL_INFO currently supports only PTRACE_SYSCALL_INFO_ENTRY,
PTRACE_SYSCALL_INFO_EXIT, and PTRACE_SYSCALL_INFO_SECCOMP operations.
Other operations could be added later if needed.
Ideally, PTRACE_SET_SYSCALL_INFO should have been introduced along with
PTRACE_GET_SYSCALL_INFO, but it didn't happen. The last straw that
convinced me to implement PTRACE_SET_SYSCALL_INFO was apparent failure to
provide an API of changing the first system call argument on riscv
architecture [1].
ptrace(2) man page:
long ptrace(enum __ptrace_request request, pid_t pid, void *addr, void *data);
...
PTRACE_SET_SYSCALL_INFO
Modify information about the system call that caused the stop.
The "data" argument is a pointer to struct ptrace_syscall_info
that specifies the system call information to be set.
The "addr" argument should be set to sizeof(struct ptrace_syscall_info)).
This patch (of 6):
hexagon is the only architecture that provides HAVE_ARCH_TRACEHOOK but
doesn't define syscall_set_return_value(). Since this function is going
to be needed on all HAVE_ARCH_TRACEHOOK architectures to implement
PTRACE_SET_SYSCALL_INFO API, add it on hexagon, too.
Link: https://lore.kernel.org/all/59505464-c84a-403d-972f-d4b2055eeaac@gmail.com/
Link: https://lkml.kernel.org/r/20250303111953.GB24170@strace.io
Signed-off-by: Dmitry V. Levin <ldv@strace.io>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alexey Gladkov (Intel) <legion@kernel.org>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: anton ivanov <anton.ivanov@cambridgegreys.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Brian Cain <bcain@quicinc.com>
Cc: Charlie Jenkins <charlie@rivosinc.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christian Zankel <chris@zankel.net>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Davide Berardi <berardi.dav@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Eugene Syromyatnikov <evgsyr@gmail.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Maciej W. Rozycki <macro@orcam.me.uk>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Naveen N Rao <naveen@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Renzo Davoi <renzo@cs.unibo.it>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russel King <linux@armlinux.org.uk>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vineet Gupta <vgupta@kernel.org>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Eugene Syromiatnikov <esyr@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
SoumishDas [Tue, 25 Mar 2025 18:13:25 +0000 (23:43 +0530)]
mm: add kernel-doc comment for free_pgd_range()
Provide kernel-doc for free_pgd_range() so it's easier to understand what
the function does and how it is used.
Link: https://lkml.kernel.org/r/20250325181325.5774-1-soumish.das@gmail.com
Signed-off-by: SoumishDas <soumish.das@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Kemeng Shi [Tue, 25 Mar 2025 16:25:28 +0000 (00:25 +0800)]
mm: swap: replace cluster_swap_free_nr() with swap_entries_put_[map/cache]()
Replace cluster_swap_free_nr() with swap_entries_put_[map/cache]() to
remove repeat code and leverage batch-remove for entries with last flag.
After removing cluster_swap_free_nr, only functions with "_nr" suffix
could free entries spanning cross clusters. Add corresponding description
in comment of swap_entries_put_map_nr() as is first function with "_nr"
suffix and have a non-suffix variant function swap_entries_put_map().
Link: https://lkml.kernel.org/r/20250325162528.68385-9-shikemeng@huaweicloud.com
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Tim Chen <tim.c.chen@linux.intel.com>
Reviewed-by: Baoquan He <bhe@redhat.com>
Cc: Kairui Song <kasong@tencent.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Kemeng Shi [Tue, 25 Mar 2025 16:25:27 +0000 (00:25 +0800)]
mm: swap: factor out helper to drop cache of entries within a single cluster
Factor out helper swap_entries_put_cache() from put_swap_folio() to serve
as a general-purpose routine for dropping cache flag of entries within a
single cluster.
Link: https://lkml.kernel.org/r/20250325162528.68385-8-shikemeng@huaweicloud.com
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Tim Chen <tim.c.chen@linux.intel.com>
Reviewed-by: Baoquan He <bhe@redhat.com>
Cc: Kairui Song <kasong@tencent.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Kemeng Shi [Tue, 25 Mar 2025 16:25:26 +0000 (00:25 +0800)]
mm: swap: free each cluster individually in swap_entries_put_map_nr()
1. Factor out general swap_entries_put_map() helper to drop entries
belonging to one cluster. If entries are last map, free entries in
batch, otherwise put entries with cluster lock acquired and released
only once.
2. Iterate and call swap_entries_put_map() for each cluster in
swap_entries_put_nr() to leverage batch-remove for last map belonging
to one cluster and reduce lock acquire/release in fallback case.
3. As swap_entries_put_nr() won't handle SWAP_HSA_CACHE drop, rename
it to swap_entries_put_map_nr().
4. As we won't drop each entry invidually with swap_entry_put() now,
do reclaim in free_swap_and_cache_nr() because
swap_entries_put_map_nr() is general routine to drop reference and the
relcaim work should only be done in free_swap_and_cache_nr(). Remove
stale comment accordingly.
Link: https://lkml.kernel.org/r/20250325162528.68385-7-shikemeng@huaweicloud.com
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Tim Chen <tim.c.chen@linux.intel.com>
Reviewed-by: Baoquan He <bhe@redhat.com>
Cc: Kairui Song <kasong@tencent.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Kemeng Shi [Tue, 25 Mar 2025 16:25:25 +0000 (00:25 +0800)]
mm: swap: drop last SWAP_MAP_SHMEM flag in batch in swap_entries_put_nr()
The SWAP_MAP_SHMEM indicates last map from shmem. Therefore we can drop
SWAP_MAP_SHMEM in batch in similar way to drop last ref count in batch.
Link: https://lkml.kernel.org/r/20250325162528.68385-6-shikemeng@huaweicloud.com
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Tim Chen <tim.c.chen@linux.intel.com>
Reviewed-by: Baoquan He <bhe@redhat.com>
Cc: Kairui Song <kasong@tencent.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Kemeng Shi [Tue, 25 Mar 2025 16:25:24 +0000 (00:25 +0800)]
mm: swap: use swap_entries_free() drop last ref count in swap_entries_put_nr()
Use swap_entries_free() to directly free swap entries when the swap
entries are not cached and referenced, without needing to set swap entries
to set intermediate SWAP_HAS_CACHE state.
Link: https://lkml.kernel.org/r/20250325162528.68385-5-shikemeng@huaweicloud.com
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Tim Chen <tim.c.chen@linux.intel.com>
Reviewed-by: Baoquan He <bhe@redhat.com>
Cc: Kairui Song <kasong@tencent.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Kemeng Shi [Tue, 25 Mar 2025 16:25:23 +0000 (00:25 +0800)]
mm: swap: use swap_entries_free() to free swap entry in swap_entry_put_locked()
In swap_entry_put_locked(), we will set slot to SWAP_HAS_CACHE before
using swap_entries_free() to do actual swap entry freeing. This introduce
an unnecessary intermediate state. By using swap_entries_free() in
swap_entry_put_locked(), we can eliminate the need to set slot to
SWAP_HAS_CACHE. This change would make the behavior of
swap_entry_put_locked() more consistent with other put() operations which
will do actual free work after put last reference.
Link: https://lkml.kernel.org/r/20250325162528.68385-4-shikemeng@huaweicloud.com
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Tim Chen <tim.c.chen@linux.intel.com>
Reviewed-by: Kairui Song <kasong@tencent.com>
Reviewed-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Kemeng Shi [Tue, 25 Mar 2025 16:25:22 +0000 (00:25 +0800)]
mm: swap: enable swap_entry_range_free() to drop any kind of last ref
The original VM_BUG_ON only allows swap_entry_range_free() to drop last
SWAP_HAS_CACHE ref. By allowing other kind of last ref in VM_BUG_ON,
swap_entry_range_free() could be a more general-purpose function able to
handle all kind of last ref. Following thi change, also rename
swap_entry_range_free() to swap_entries_free() and update it's comment
accordingly.
This is a preparation to use swap_entries_free() to drop more kind of last
ref other than SWAP_HAS_CACHE.
[shikemeng@huaweicloud.com: add __maybe_unused attribute for swap_is_last_ref() and update comment]
Link: https://lkml.kernel.org/r/20250410153908.612984-1-shikemeng@huaweicloud.com
Link: https://lkml.kernel.org/r/20250325162528.68385-3-shikemeng@huaweicloud.com
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Tim Chen <tim.c.chen@linux.intel.com>
Reviewed-by: Baoquan He <bhe@redhat.com>
Tested-by: SeongJae Park <sj@kernel.org>
Cc: Kairui Song <kasong@tencent.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Kemeng Shi [Tue, 25 Mar 2025 16:25:21 +0000 (00:25 +0800)]
mm: swap: rename __swap_[entry/entries]_free[_locked] to swap_[entry/entries]_put[_locked]
Patch series "Minor cleanups and improvements to swap freeing code", v4.
This series contains some cleanups and improvements which are made
during learning swapfile. Here is a summary of the changes:
1. Function naming improvments.
- Use "put" instead of "free" to name functions which only do actual
free when count drops to zero.
- Use "entry" to name function only frees one swap slot. Use
"entries" to name function could may free multi swap slots within one
cluster. Use "_nr" suffix to name function which could free multi
swap slots spanning cross multi clusters.
2. Eliminate the need to set swap slot to intermediate SWAP_HAS_CACHE
value before do actual free by using swap_entry_range_free()
3. Add helpers swap_entries_put_map() and swap_entries_put_cache() as
a general-purpose routine to free swap entries within a single cluster
which will try batch-remove first and fallback to put eatch entry
indvidually with cluster lock acquired/released only once. By using
these helpers, we could remove repeated code, levarage batch-remove in
more cases and aoivd to acquire/release cluster lock for each single
swap entry.
This patch (of 8):
In __swap_entry_free[_locked] and __swap_entries_free, we decrease count
first and only free swap entry if count drops to zero. This behavior is
more akin to a put() operation rather than a free() operation. Therefore,
rename these functions with "put" instead of "free". Additionally, add
"_nr" suffix to swap_entries_put to indicate the input range may span swap
clusters.
Link: https://lkml.kernel.org/r/20250325162528.68385-1-shikemeng@huaweicloud.com
Link: https://lkml.kernel.org/r/20250325162528.68385-2-shikemeng@huaweicloud.com
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Tim Chen <tim.c.chen@linux.intel.com>
Reviewed-by: Baoquan He <bhe@redhat.com>
Cc: Kairui Song <kasong@tencent.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Shakeel Butt [Fri, 4 Apr 2025 01:39:13 +0000 (18:39 -0700)]
memcg: manually inline replace_stock_objcg
The replace_stock_objcg() is being called by only refill_obj_stock, so
manually inline it.
Link: https://lkml.kernel.org/r/20250404013913.1663035-10-shakeel.butt@linux.dev
Signed-off-by: Shakeel Butt <shakeel.butt@linux.dev>
Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Vlastimil Babka [Fri, 4 Apr 2025 01:39:12 +0000 (18:39 -0700)]
memcg: combine slab obj stock charging and accounting
When handing slab objects, we use obj_cgroup_[un]charge() for (un)charging
and mod_objcg_state() to account NR_SLAB_[UN]RECLAIMABLE_B. All these
operations use the percpu stock for performance. However with the calls
being separate, the stock_lock is taken twice in each case.
By refactoring the code, we can turn mod_objcg_state() into
__account_obj_stock() which is called on a stock that's already locked and
validated. On the charging side we can call this function from
consume_obj_stock() when it succeeds, and refill_obj_stock() in the
fallback. We just expand parameters of these functions as necessary. The
uncharge side from __memcg_slab_free_hook() is just the call to
refill_obj_stock().
Other callers of obj_cgroup_[un]charge() (i.e. not slab) simply pass the
extra parameters as NULL/zeroes to skip the __account_obj_stock()
operation.
In __memcg_slab_post_alloc_hook() we now charge each object separately,
but that's not a problem as we did call mod_objcg_state() for each object
separately, and most allocations are non-bulk anyway. This could be
improved by batching all operations until slab_pgdat(slab) changes.
Some preliminary benchmarking with a kfree(kmalloc()) loop of 10M
iterations with/without __GFP_ACCOUNT:
Before the patch:
kmalloc/kfree !memcg:
581390144 cycles
kmalloc/kfree memcg:
783689984 cycles
After the patch:
kmalloc/kfree memcg:
658723808 cycles
More than half of the overhead of __GFP_ACCOUNT relative to
non-accounted case seems eliminated.
Link: https://lkml.kernel.org/r/20250404013913.1663035-9-shakeel.butt@linux.dev
Signed-off-by: Shakeel Butt <shakeel.butt@linux.dev>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Shakeel Butt [Fri, 4 Apr 2025 01:39:11 +0000 (18:39 -0700)]
memcg: use __mod_memcg_state in drain_obj_stock
For non-PREEMPT_RT kernels, drain_obj_stock() is always called with irq
disabled, so we can use __mod_memcg_state() instead of mod_memcg_state().
For PREEMPT_RT, we need to add memcg_stats_[un]lock in
__mod_memcg_state().
Link: https://lkml.kernel.org/r/20250404013913.1663035-8-shakeel.butt@linux.dev
Signed-off-by: Shakeel Butt <shakeel.butt@linux.dev>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Shakeel Butt [Fri, 4 Apr 2025 01:39:10 +0000 (18:39 -0700)]
memcg: do obj_cgroup_put inside drain_obj_stock
Previously we could not call obj_cgroup_put() inside the local lock
because on the put on the last reference, the release function
obj_cgroup_release() may try to re-acquire the local lock. However that
chain has been broken. Now simply do obj_cgroup_put() inside
drain_obj_stock() instead of returning the old objcg.
Link: https://lkml.kernel.org/r/20250404013913.1663035-7-shakeel.butt@linux.dev
Signed-off-by: Shakeel Butt <shakeel.butt@linux.dev>
Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Shakeel Butt [Fri, 4 Apr 2025 01:39:09 +0000 (18:39 -0700)]
memcg: no refilling stock from obj_cgroup_release
obj_cgroup_release is called when all the references to the objcg have
been released i.e. no more memory objects are pointing to it. Most
probably objcg->memcg will be pointing to some ancestor memcg. In
obj_cgroup_release(), the kernel calls obj_cgroup_uncharge_pages() which
refills the local stock.
There is no need to refill the local stock with some ancestor memcg and
flush the local stock. Let's decouple obj_cgroup_release() from the local
stock by uncharging instead of refilling. One additional benefit of this
change is that it removes the requirement to only call obj_cgroup_put()
outside of local_lock.
Link: https://lkml.kernel.org/r/20250404013913.1663035-6-shakeel.butt@linux.dev
Signed-off-by: Shakeel Butt <shakeel.butt@linux.dev>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Shakeel Butt [Fri, 4 Apr 2025 01:39:08 +0000 (18:39 -0700)]
memcg: manually inline __refill_stock
There are no more multiple callers of __refill_stock(), so simply inline
it to refill_stock().
Link: https://lkml.kernel.org/r/20250404013913.1663035-5-shakeel.butt@linux.dev
Signed-off-by: Shakeel Butt <shakeel.butt@linux.dev>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Shakeel Butt [Fri, 4 Apr 2025 01:39:07 +0000 (18:39 -0700)]
memcg: introduce memcg_uncharge
At multiple places in memcontrol.c, the memory and memsw page counters are
being uncharged. This is error-prone. Let's move the functionality to a
newly introduced memcg_uncharge and call it from all those places.
Link: https://lkml.kernel.org/r/20250404013913.1663035-4-shakeel.butt@linux.dev
Signed-off-by: Shakeel Butt <shakeel.butt@linux.dev>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Shakeel Butt [Fri, 4 Apr 2025 01:39:06 +0000 (18:39 -0700)]
memcg: decouple drain_obj_stock from local stock
Currently drain_obj_stock() can potentially call __refill_stock which
accesses local cpu stock and thus requires memcg stock's local_lock.
However if we look at the code paths leading to drain_obj_stock(), there
is never a good reason to refill the memcg stock at all from it.
At the moment, drain_obj_stock can be called from reclaim, hotplug cpu
teardown, mod_objcg_state() and refill_obj_stock(). For reclaim and
hotplug there is no need to refill. For the other two paths, most
probably the newly switched objcg would be used in near future and thus no
need to refill stock with the older objcg.
In addition, __refill_stock() from drain_obj_stock() happens on rare
cases, so performance is not really an issue. Let's just uncharge
directly instead of refill which will also decouple drain_obj_stock from
local cpu stock and local_lock requirements.
Link: https://lkml.kernel.org/r/20250404013913.1663035-3-shakeel.butt@linux.dev
Signed-off-by: Shakeel Butt <shakeel.butt@linux.dev>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Shakeel Butt [Fri, 4 Apr 2025 01:39:05 +0000 (18:39 -0700)]
memcg: remove root memcg check from refill_stock
refill_stock can not be called with root memcg, so there is no need to
check it. Instead add a warning if root is ever passed to it.
Link: https://lkml.kernel.org/r/20250404013913.1663035-1-shakeel.butt@linux.dev
Link: https://lkml.kernel.org/r/20250404013913.1663035-2-shakeel.butt@linux.dev
Signed-off-by: Shakeel Butt <shakeel.butt@linux.dev>
Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Shakeel Butt [Thu, 3 Apr 2025 05:33:26 +0000 (22:33 -0700)]
memcg: vmalloc: simplify MEMCG_VMALLOC updates
The vmalloc region can either be charged to a single memcg or none. At
the moment kernel traverses all the pages backing the vmalloc region to
update the MEMCG_VMALLOC stat. However there is no need to look at all
the pages as all those pages will be charged to a single memcg or none.
Simplify the MEMCG_VMALLOC update by just looking at the first page of the
vmalloc region.
[shakeel.butt@linux.dev: add comment]
Link: https://lkml.kernel.org/r/bmlkdbqgwboyqrnxyom7n52fjmo76ux77jhqw5odc6c6dfon3h@zdylwtmlywbt
Link: https://lkml.kernel.org/r/20250403053326.26860-1-shakeel.butt@linux.dev
Signed-off-by: Shakeel Butt <shakeel.butt@linux.dev>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Reviewed-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Michal Clapinski [Fri, 4 Apr 2025 11:11:03 +0000 (13:11 +0200)]
mm/compaction: reduce the difference between low and high watermarks
Reduce the diff between low and high watermarks when compaction
proactiveness is set to high. This allows users who set the proactiveness
really high to have more stable fragmentation score over time.
Link: https://lkml.kernel.org/r/20250404111103.1994507-3-mclapinski@google.com
Signed-off-by: Michal Clapinski <mclapinski@google.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Michal Clapinski [Fri, 4 Apr 2025 11:11:02 +0000 (13:11 +0200)]
mm/compaction: remove low watermark cap for proactive compaction
Patch series "mm/compaction: allow more aggressive proactive compaction",
v4.
Our goal is to keep memory usage of a VM low on the host. For that
reason, we use free page reporting which by default reports free pages of
order 9 and larger to the host to be freed. The feature works well only
if the memory in the guest is not fragmented below pages of order 9.
Proactive compaction can be reused to achieve defragmentation after some
parameter tweaking.
When the fragmentation score (lower is better) gets larger than the high
watermark, proactive compaction kicks in. Compaction stops when the score
goes below the low watermark (or no progress is made and backoff kicks
in). Let's define the difference between high and low watermarks as
leeway. Before these changes, the minimum possible value for low
watermark was 5 and the leeway was hardcoded to 10 (so minimum possible
value for high watermark was 15).
To test this, I created a VM with 19GB of memory and free page reporting
enabled. The VM was ~idle. I meassured the memory usage from inside the
guest (/proc/meminfo) and from the host (provided by the hypervisor).
Before:
https://drive.google.com/file/d/1Xw23lRry_PgEH3f6QRnSGvoHh2u9UHyI/view?usp=sharing
After:
https://drive.google.com/file/d/1wMhpIzepx6t44F70yCPA50n1S5V2AT-a/view?usp=sharing
This patch (of 2):
Previously a min cap of 5 has been set in the commit introducing proactive
compaction. This was to make sure users don't hurt themselves by setting
the proactiveness to 100 and making their system unresponsive. But the
compaction mechanism has a backoff mechanism that will sleep for 30s if no
progress is made, so I don't see a significant risk here. My system (19GB
of memory) has been perfectly fine with both watermarks hardcoded to 0.
Link: https://lkml.kernel.org/r/20250404111103.1994507-1-mclapinski@google.com
Link: https://lkml.kernel.org/r/20250404111103.1994507-2-mclapinski@google.com
Signed-off-by: Michal Clapinski <mclapinski@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Ye Liu [Fri, 28 Mar 2025 01:20:31 +0000 (09:20 +0800)]
mm/page_alloc: simplify free_page_is_bad by removing free_page_is_bad_report
Refactor free_page_is_bad() to call bad_page() directly, removing the
intermediate free_page_is_bad_report(). This reduces unnecessary
indirection, improving code clarity and maintainability without changing
functionality.
Link: https://lkml.kernel.org/r/20250328012031.1204993-1-ye.liu@linux.dev
Signed-off-by: Ye Liu <liuye@kylinos.cn>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Sergey Senozhatsky [Thu, 27 Mar 2025 01:58:09 +0000 (10:58 +0900)]
zram: modernize writeback interface
The writeback interface supports a page_index=N parameter which performs
writeback of the given page. Since we rarely need to writeback just one
single page, the typical use case involves a number of writeback calls,
each performing writeback of one page:
echo page_index=100 > zram0/writeback
...
echo page_index=200 > zram0/writeback
echo page_index=500 > zram0/writeback
...
echo page_index=700 > zram0/writeback
One obvious downside of this is that it increases the number of syscalls.
Less obvious, but a significantly more important downside, is that when
given only one page to post-process zram cannot perform an optimal target
selection. This becomes a critical limitation when writeback_limit is
enabled, because under writeback_limit we want to guarantee the highest
memory savings hence we first need to writeback pages that release the
highest amount of zsmalloc pool memory.
This patch adds page_indexes=LOW-HIGH parameter to the writeback
interface:
echo page_indexes=100-200 page_indexes=500-700 > zram0/writeback
This gives zram a chance to apply an optimal target selection strategy on
each iteration of the writeback loop.
We also now permit multiple page_index parameters per call (previously
zram would recognize only one page_index) and a mix or single pages and
page ranges:
echo page_index=42 page_index=99 page_indexes=100-200 \
page_indexes=500-700 > zram0/writeback
Apart from that the patch also unifies parameters passing and resembles
other "modern" zram device attributes (e.g. recompression), while the old
interface used a mixed scheme: values-less parameters for mode and a
key=value format for page_index. We still support the "old" value-less
format for compatibility reasons.
[senozhatsky@chromium.org: simplify parse_page_index() range checks, per Brian]
nk: https://lkml.kernel.org/r/
20250404015327.
2427684-1-senozhatsky@chromium.org
[sozhatsky@chromium.org: fix uninitialized variable in zram_writeback_slots(), per Dan]
nk: https://lkml.kernel.org/r/
20250409112611.
1154282-1-senozhatsky@chromium.org
Link: https://lkml.kernel.org/r/20250327015818.4148660-1-senozhatsky@chromium.org
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Brian Geffon <bgeffon@google.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Richard Chang <richardycc@google.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Siddarth G [Thu, 3 Apr 2025 10:13:45 +0000 (15:43 +0530)]
selftests/mm: convert page_size to unsigned long
Cppcheck warning:
int result is assigned to long long variable. If the variable is long long
to avoid loss of information, then you have loss of information.
This patch changes the type of page_size from 'unsigned int' to
'unsigned long' instead of using ULL suffixes. Changing hpage_size to
'unsigned long' was considered, but since gethugepage() expects an int,
this change was avoided.
Link: https://lkml.kernel.org/r/20250403101345.29226-1-siddarthsgml@gmail.com
Signed-off-by: Siddarth G <siddarthsgml@gmail.com>
Reported-by: David Binderman <dcb314@hotmail.com>
Closes: https://lore.kernel.org/all/AS8PR02MB10217315060BBFDB21F19643E9CA62@AS8PR02MB10217.eurprd02.prod.outlook.com/
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Ye Liu [Tue, 25 Mar 2025 07:38:03 +0000 (15:38 +0800)]
mm/show_mem: optimize si_meminfo_node by reducing redundant code
Refactors the si_meminfo_node() function by reducing redundant code and
improving readability.
Moved the calculation of managed_pages inside the existing loop that
processes pgdat->node_zones, eliminating the need for a separate loop.
Simplified the logic by removing unnecessary preprocessor conditionals.
Ensured that both totalram, totalhigh, and other memory statistics are
consistently set without duplication.
This change results in cleaner and more efficient code without altering
functionality.
Link: https://lkml.kernel.org/r/20250325073803.852594-1-ye.liu@linux.dev
Signed-off-by: Ye Liu <liuye@kylinos.cn>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Harry Yoo <harry.yoo@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Ignacio Encinas [Mon, 31 Mar 2025 19:57:05 +0000 (21:57 +0200)]
mm: annotate data race in update_hiwater_rss
mm_struct.hiwater_rss can be accessed concurrently without proper
synchronization as reported by KCSAN.
This data race is benign as it only affects accounting information.
Annotate it with data_race() to make KCSAN happy.
Link: https://lkml.kernel.org/r/20250331-mm-maxrss-data-race-v2-1-cf958e6205bf@iencinas.com
Signed-off-by: Ignacio Encinas <ignacio@iencinas.com>
Reported-by: syzbot+419c4b42acc36c420ad3@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/
67e3390c.
050a0220.1ec46.0001.GAE@google.com/
Suggested-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: Pedro Falcato <pfalcato@suse.de>
Cc: Liam Howlett <liam.howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Vishal Moola (Oracle) [Tue, 1 Apr 2025 02:10:25 +0000 (19:10 -0700)]
mm/compaction: use folio in hugetlb pathway
Use a folio in the hugetlb pathway during the compaction migrate-able
pageblock scan.
This removes a call to compound_head().
Link: https://lkml.kernel.org/r/20250401021025.637333-2-vishal.moola@gmail.com
Signed-off-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Acked-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Gregory Price [Mon, 27 Jan 2025 15:34:05 +0000 (10:34 -0500)]
acpi,srat: give memory block size advice based on CFMWS alignment
Capacity is stranded when CFMWS regions are not aligned to block size. On
x86, block size increases with capacity (2G blocks @ 64G capacity).
Use CFMWS base/size to report memory block size alignment advice.
Link: https://lkml.kernel.org/r/20250127153405.3379117-4-gourry@gourry.net
Signed-off-by: Gregory Price <gourry@gourry.net>
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Tested-by: Fan Ni <fan.ni@samsung.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Acked-by: Oscar Salvador <osalvador@suse.de>
Cc: Alison Schofield <alison.schofield@intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Bruno Faccini <bfaccini@nvidia.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Haibo Xu <haibo1.xu@intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joanthan Cameron <Jonathan.Cameron@huawei.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <rrichter@amd.com>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Gregory Price [Mon, 27 Jan 2025 15:34:04 +0000 (10:34 -0500)]
x86: probe memory block size advisement value during mm init
Systems with hotplug may provide an advisement value on what the memblock
size should be. Probe this value when the rest of the configuration
values are considered.
The new heuristic is as follows
1) set_memory_block_size_order value if already set (cmdline param)
2) minimum block size if memory is less than large block limit
3) if no hotplug advice: Max block size if system is bare-metal,
otherwise use end of memory alignment.
4) if hotplug advice: lesser of advice and end of memory alignment.
Convert to cpu_feature_enabled() while at it.[1]
[1] https://lore.kernel.org/all/
20241031103401.GBZyNdGQ-ZyXKyzC_z@fat_crate.local/
Link: https://lkml.kernel.org/r/20250127153405.3379117-3-gourry@gourry.net
Signed-off-by: Gregory Price <gourry@gourry.net>
Suggested-by: Borislav Petkov <bp@alien8.de>
Suggested-by: David Hildenbrand <david@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Tested-by: Fan Ni <fan.ni@samsung.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Acked-by: Oscar Salvador <osalvador@suse.de>
Cc: Alison Schofield <alison.schofield@intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Bruno Faccini <bfaccini@nvidia.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Haibo Xu <haibo1.xu@intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joanthan Cameron <Jonathan.Cameron@huawei.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Robert Richter <rrichter@amd.com>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Gregory Price [Mon, 27 Jan 2025 15:34:03 +0000 (10:34 -0500)]
memory: implement memory_block_advise/probe_max_size
Patch series "memory,x86,acpi: hotplug memory alignment advisement", v8.
When physical address regions are not aligned to memory block size, the
misaligned portion is lost (stranded capacity).
Block size (min/max/selected) is architecture defined. Most architectures
tend to use the minimum block size or some simplistic heurist. On x86,
memory block size increases up to 2GB, and is otherwise fitted to the
alignment of non-hotplug (i.e. not special purpose memory).
CXL exposes its memory for management through the ACPI CEDT (CXL Early
Detection Table) in a field called the CXL Fixed Memory Window. Per the
CXL specification, this memory must be aligned to at least 256MB.
When a CFMW aligns on a size less than the block size, this causes a loss
of up to 2GB per CFMW on x86. It is not uncommon for CFMW to be allocated
per-device - though this behavior is BIOS defined.
This patch set provides 3 things:
1) implement advise/query functions in driverse/base/memory.c to
report/query architecture agnostic hotplug block alignment advice.
2) update x86 memblock size logic to consider the hotplug advice
3) add code in acpi/numa/srat.c to report CFMW alignment advice
The advisement interfaces are design to be called during arch_init code
prior to allocator and smp_init. start_kernel will call these through
setup_arch() (via acpi and mm/init_64.c on x86), which occurs prior to
mm_core_init and smp_init - so no need for atomics.
There's an attempt to signal callers to advise() that query has already
occurred, but this is predicated on the notion that query actually occurs
(which presently only happens on the x86 arch). This is to assist
debugging future users. Otherwise, the advise() call has been marked
__init to help static discovery of bad call times.
Once query is called the first time, it will always return the same value.
Interfaces return -EBUSY and 0 respectively on systems without hotplug.
This patch (of 3):
Hotplug memory sources may have opinions on what the memblock size should
be - usually for alignment purposes. For example, CXL memory extents can
be 256MB with a matching alignment. If this size/alignment is smaller
than the block size, it can result in stranded capacity.
Implement memory_block_advise_max_size for use prior to allocator init,
for software to advise the system on the max block size.
Implement memory_block_probe_max_size for use by arch init code to
calculate the best block size. Use of advice is architecture defined.
The probe value can never change after first probe. Calls to advise after
probe will return -EBUSY to aid debugging.
On systems without hotplug, always return -ENODEV and 0 respectively.
Link: https://lkml.kernel.org/r/20250127153405.3379117-1-gourry@gourry.net
Link: https://lkml.kernel.org/r/20250127153405.3379117-2-gourry@gourry.net
Signed-off-by: Gregory Price <gourry@gourry.net>
Suggested-by: Ira Weiny <ira.weiny@intel.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Tested-by: Fan Ni <fan.ni@samsung.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Acked-by: Oscar Salvador <osalvador@suse.de>
Cc: Alison Schofield <alison.schofield@intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Bruno Faccini <bfaccini@nvidia.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Haibo Xu <haibo1.xu@intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joanthan Cameron <Jonathan.Cameron@huawei.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Robert Richter <rrichter@amd.com>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Songtang Liu [Wed, 2 Apr 2025 07:41:16 +0000 (03:41 -0400)]
mm: page_alloc: remove redundant READ_ONCE
In the current code, batch is a local variable, and it cannot be
concurrently modified. It's unnecessary to use READ_ONCE here, so remove
it.
Link: https://lkml.kernel.org/r/CAA=HWd1kn01ym8YuVFuAqK2Ggq3itEGkqX8T6eCXs_C7tiv-Jw@mail.gmail.com
Fixes:
51a755c56dc0 ("mm: tune PCP high automatically")
Signed-off-by: Songtang Liu <liusongtang@bytedance.com>
Reviewed-by: Qi Zheng <zhengqi.arch@bytedance.com>
Reviewed-by: Huang Ying <ying.huang@linux.alibaba.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@amd.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Michal Hocko [Wed, 2 Apr 2025 09:01:17 +0000 (11:01 +0200)]
memcg, oom: do not bypass oom killer for dying tasks
7775face2079 ("memcg: killed threads should not invoke memcg OOM killer")
has added a bypass of the oom killer path for dying threads because a very
specific workload (described in the changelog) could hit "no killable
tasks" path. This itself is not fatal condition but it could be annoying
if this was a common case.
On the other hand the bypass has some issues on its own. Without
triggering oom killer we won't be able to trigger async oom reclaim
(oom_reaper) which can operate on killed tasks as well as long as they
still have their mm available. This could be the case during futex
cleanup when the memory as pointed out by Johannes in [1]. The said case
is still not fully understood but let's drop this bypass that was mostly
driven by an artificial workload and allow dying tasks to go into oom
path. This will make the code easier to reason about and also help corner
cases where oom_reaper could help to release memory.
Link: https://lore.kernel.org/all/20241212183012.GB1026@cmpxchg.org/T/#u
Link: https://lkml.kernel.org/r/20250402090117.130245-1-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Suggested-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Rik van Riel <riel@surriel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Nhat Pham [Wed, 2 Apr 2025 20:44:16 +0000 (13:44 -0700)]
zsmalloc: prefer the the original page's node for compressed data
Currently, zsmalloc, zswap's and zram's backend memory allocator, does not
enforce any policy for the allocation of memory for the compressed data,
instead just adopting the memory policy of the task entering reclaim, or
the default policy (prefer local node) if no such policy is specified.
This can lead to several pathological behaviors in multi-node NUMA
systems:
1. Systems with CXL-based memory tiering can encounter the following
inversion with zswap/zram: the coldest pages demoted to the CXL tier
can return to the high tier when they are reclaimed to compressed swap,
creating memory pressure on the high tier.
2. Consider a direct reclaimer scanning nodes in order of allocation
preference. If it ventures into remote nodes, the memory it compresses
there should stay there. Trying to shift those contents over to the
reclaiming thread's preferred node further *increases* its local
pressure, and provoking more spills. The remote node is also the most
likely to refault this data again. This undesirable behavior was
pointed out by Johannes Weiner in [1].
3. For zswap writeback, the zswap entries are organized in
node-specific LRUs, based on the node placement of the original pages,
allowing for targeted zswap writeback for specific nodes.
However, the compressed data of a zswap entry can be placed on a
different node from the LRU it is placed on. This means that reclaim
targeted at one node might not free up memory used for zswap entries in
that node, but instead reclaiming memory in a different node.
All of these issues will be resolved if the compressed data go to the same
node as the original page. This patch encourages this behavior by having
zswap and zram pass the node of the original page to zsmalloc, and have
zsmalloc prefer the specified node if we need to allocate new (zs)pages
for the compressed data.
Note that we are not strictly binding the allocation to the preferred
node. We still allow the allocation to fall back to other nodes when the
preferred node is full, or if we have zspages with slots available on a
different node. This is OK, and still a strict improvement over the
status quo:
1. On a system with demotion enabled, we will generally prefer
demotions over compressed swapping, and only swap when pages have
already gone to the lowest tier. This patch should achieve the desired
effect for the most part.
2. If the preferred node is out of memory, letting the compressed data
going to other nodes can be better than the alternative (OOMs, keeping
cold memory unreclaimed, disk swapping, etc.).
3. If the allocation go to a separate node because we have a zspage
with slots available, at least we're not creating extra immediate
memory pressure (since the space is already allocated).
3. While there can be mixings, we generally reclaim pages in same-node
batches, which encourage zspage grouping that is more likely to go to
the right node.
4. A strict binding would require partitioning zsmalloc by node, which
is more complicated, and more prone to regression, since it reduces the
storage density of zsmalloc. We need to evaluate the tradeoff and
benchmark carefully before adopting such an involved solution.
[1]: https://lore.kernel.org/linux-mm/
20250331165306.GC2110528@cmpxchg.org/
[senozhatsky@chromium.org: coding-style fixes]
Link: https://lkml.kernel.org/r/mnvexa7kseswglcqbhlot4zg3b3la2ypv2rimdl5mh5glbmhvz@wi6bgqn47hge
Link: https://lkml.kernel.org/r/20250402204416.3435994-1-nphamcs@gmail.com
Signed-off-by: Nhat Pham <nphamcs@gmail.com>
Suggested-by: Gregory Price <gourry@gourry.net>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Chengming Zhou <chengming.zhou@linux.dev>
Acked-by: Sergey Senozhatsky <senozhatsky@chromium.org> [zram, zsmalloc]
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Yosry Ahmed <yosry.ahmed@linux.dev> [zswap/zsmalloc]
Cc: "Huang, Ying" <ying.huang@linux.alibaba.com>
Cc: Joanthan Cameron <Jonathan.Cameron@huawei.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Matthew Wilcox (Oracle) [Wed, 2 Apr 2025 21:06:10 +0000 (22:06 +0100)]
mm: delete thp_nr_pages()
All callers now use folio_nr_pages(). Delete this wrapper.
Link: https://lkml.kernel.org/r/20250402210612.2444135-9-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Matthew Wilcox (Oracle) [Wed, 2 Apr 2025 21:06:09 +0000 (22:06 +0100)]
filemap: remove readahead_page_batch()
This function has no more callers; delete it.
Link: https://lkml.kernel.org/r/20250402210612.2444135-8-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Matthew Wilcox (Oracle) [Wed, 2 Apr 2025 21:06:08 +0000 (22:06 +0100)]
filemap: convert __readahead_batch() to use a folio
Extract folios from i_mapping, not pages. Removes a hidden call to
compound_head(), a use of thp_nr_pages() and an unnecessary assertion that
we didn't find a tail page in the page cache.
Link: https://lkml.kernel.org/r/20250402210612.2444135-7-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Matthew Wilcox (Oracle) [Wed, 2 Apr 2025 21:06:07 +0000 (22:06 +0100)]
filemap: remove find_subpage()
All users of this function now call folio_file_page() instead. Delete it.
Link: https://lkml.kernel.org/r/20250402210612.2444135-6-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Matthew Wilcox (Oracle) [Wed, 2 Apr 2025 21:06:06 +0000 (22:06 +0100)]
iov_iter: convert iov_iter_extract_xarray_pages() to use folios
ITER_XARRAY is exclusively used with xarrays that contain folios, not
pages, so extract folio pointers from it, not page pointers. Removes a
use of find_subpage().
Link: https://lkml.kernel.org/r/20250402210612.2444135-5-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Matthew Wilcox (Oracle) [Wed, 2 Apr 2025 21:06:05 +0000 (22:06 +0100)]
iov_iter: convert iter_xarray_populate_pages() to use folios
ITER_XARRAY is exclusively used with xarrays that contain folios, not
pages, so extract folio pointers from it, not page pointers. Removes a
hidden call to compound_head() and a use of find_subpage().
Link: https://lkml.kernel.org/r/20250402210612.2444135-4-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Matthew Wilcox (Oracle) [Wed, 2 Apr 2025 21:06:04 +0000 (22:06 +0100)]
mm: remove offset_in_thp()
All callers have been converted to call offset_in_folio().
Link: https://lkml.kernel.org/r/20250402210612.2444135-3-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Matthew Wilcox (Oracle) [Wed, 2 Apr 2025 21:06:03 +0000 (22:06 +0100)]
filemap: remove readahead_page()
Patch series "Misc folio patches for 6.16".
Remove a few APIs that we've converted everybody from using. I also found
a few places that extract a page pointer from i_pages, which will be an
invalid thing to do when we separate pages from folios.
This patch (of 8):
All filesystems have now been converted to call readahead_folio() so we
can delete this wrapper.
Link: https://lkml.kernel.org/r/20250402210612.2444135-1-willy@infradead.org
Link: https://lkml.kernel.org/r/20250402210612.2444135-2-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Matthew Wilcox (Oracle) [Wed, 2 Apr 2025 18:17:05 +0000 (19:17 +0100)]
arch: remove mk_pmd()
There are now no callers of mk_huge_pmd() and mk_pmd(). Remove them.
Link: https://lkml.kernel.org/r/20250402181709.2386022-12-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Richard Weinberger <richard@nod.at>
Cc: <x86@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Matthew Wilcox (Oracle) [Wed, 2 Apr 2025 18:17:04 +0000 (19:17 +0100)]
mm: add folio_mk_pmd()
Removes five conversions from folio to page. Also removes both callers of
mk_pmd() that aren't part of mk_huge_pmd(), getting us a step closer to
removing the confusion between mk_pmd(), mk_huge_pmd() and pmd_mkhuge().
Link: https://lkml.kernel.org/r/20250402181709.2386022-11-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Richard Weinberger <richard@nod.at>
Cc: <x86@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Matthew Wilcox (Oracle) [Wed, 2 Apr 2025 18:17:03 +0000 (19:17 +0100)]
mm: remove mk_huge_pte()
The only remaining user of mk_huge_pte() is the debug code, so remove the
API and replace its use with pfn_pte() which lets us remove the conversion
to a page first. We should always call arch_make_huge_pte() to turn this
PTE into a huge PTE before operating on it with huge_pte_mkdirty() etc.
Link: https://lkml.kernel.org/r/20250402181709.2386022-10-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Richard Weinberger <richard@nod.at>
Cc: <x86@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Matthew Wilcox (Oracle) [Wed, 2 Apr 2025 18:17:02 +0000 (19:17 +0100)]
hugetlb: simplify make_huge_pte()
mk_huge_pte() is a bad API. Despite its name, it creates a normal PTE
which is later transformed into a huge PTE by arch_make_huge_pte(). So
replace the page argument with a folio argument and call folio_mk_pte()
instead. Then, because we now know this is a regular PTE rather than a
huge one, use pte_mkdirty() instead of huge_pte_mkdirty() (and similar
functions).
Link: https://lkml.kernel.org/r/20250402181709.2386022-9-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Richard Weinberger <richard@nod.at>
Cc: <x86@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Matthew Wilcox (Oracle) [Wed, 2 Apr 2025 18:17:01 +0000 (19:17 +0100)]
mm: add folio_mk_pte()
Remove a cast from folio to page in four callers of mk_pte().
Link: https://lkml.kernel.org/r/20250402181709.2386022-8-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Richard Weinberger <richard@nod.at>
Cc: <x86@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Matthew Wilcox (Oracle) [Wed, 2 Apr 2025 18:17:00 +0000 (19:17 +0100)]
mm: make mk_pte() definition unconditional
All architectures now use the common mk_pte() definition, so we can remove
the condition.
Link: https://lkml.kernel.org/r/20250402181709.2386022-7-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Richard Weinberger <richard@nod.at>
Cc: <x86@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Matthew Wilcox (Oracle) [Wed, 2 Apr 2025 18:16:59 +0000 (19:16 +0100)]
um: remove custom definition of mk_pte()
Move the pfn_pte() definitions from the 2level and 4level files to the
generic pgtable.h and delete the custom definition of mk_pte() so that we
use the central definition.
Link: https://lkml.kernel.org/r/20250402181709.2386022-6-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: <x86@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Matthew Wilcox (Oracle) [Wed, 2 Apr 2025 18:16:58 +0000 (19:16 +0100)]
x86: remove custom definition of mk_pte()
Move the shadow stack check to pfn_pte() which lets us use the common
definition of mk_pte().
Link: https://lkml.kernel.org/r/20250402181709.2386022-5-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Richard Weinberger <richard@nod.at>
Cc: <x86@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Matthew Wilcox (Oracle) [Wed, 2 Apr 2025 18:16:57 +0000 (19:16 +0100)]
sparc32: remove custom definition of mk_pte()
Instead of defining pfn_pte() in terms of mk_pte(), make pfn_pte() the
base implementation. That lets us use the generic definition of mk_pte().
Link: https://lkml.kernel.org/r/20250402181709.2386022-4-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Zi Yan <ziy@nvidia.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Richard Weinberger <richard@nod.at>
Cc: <x86@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Matthew Wilcox (Oracle) [Wed, 2 Apr 2025 18:16:56 +0000 (19:16 +0100)]
mm: introduce a common definition of mk_pte()
Most architectures simply call pfn_pte(). Centralise that as the normal
definition and remove the definition of mk_pte() from the architectures
which have either that exact definition or something similar.
Link: https://lkml.kernel.org/r/20250402181709.2386022-3-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # m68k
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> # s390
Cc: Zi Yan <ziy@nvidia.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Richard Weinberger <richard@nod.at>
Cc: <x86@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Matthew Wilcox (Oracle) [Wed, 2 Apr 2025 18:16:55 +0000 (19:16 +0100)]
mm: set the pte dirty if the folio is already dirty
Patch series "Add folio_mk_pte()", v2.
Today if you have a folio and want to create a PTE that points to the
first page in it, you have to convert from a folio to a page. That's
zero-cost today but will be more expensive in the future.
I didn't want to add folio_mk_pte() to each architecture, and I didn't
want to lose any optimisations that architectures have from their own
implementation of mk_pte(). Fortunately, most architectures have by now
turned their mk_pte() into a fairly bland variant of pfn_pte(), but s390
has a special optimisation that needs to be moved into generic code in the
first patch.
At the end of this patch set, we have mk_pte() and folio_mk_pte() in mm.h
and each architecture only has to implement pfn_pte(). We've also
eliminated mk_huge_pte(), mk_huge_pmd() and mk_pmd().
This patch (of 11):
If the first access to a folio is a read that is then followed by a write,
we can save a page fault. s390 implemented this in their mk_pte() in
commit
abf09bed3cce ("s390/mm: implement software dirty bits"), but other
architectures can also benefit from this.
Link: https://lkml.kernel.org/r/20250402181709.2386022-1-willy@infradead.org
Link: https://lkml.kernel.org/r/20250402181709.2386022-2-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> # for s390
Cc: Zi Yan <ziy@nvidia.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Richard Weinberger <richard@nod.at>
Cc: <x86@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Jinliang Zheng [Tue, 15 Apr 2025 09:02:32 +0000 (17:02 +0800)]
mm: fix ratelimit_pages update error in dirty_ratio_handler()
In dirty_ratio_handler(), vm_dirty_bytes must be set to zero before
calling writeback_set_ratelimit(), as global_dirty_limits() always
prioritizes the value of vm_dirty_bytes.
It's domain_dirty_limits() that's relevant here, not node_dirty_ok:
dirty_ratio_handler
writeback_set_ratelimit
global_dirty_limits(&dirty_thresh) <- ratelimit_pages based on dirty_thresh
domain_dirty_limits
if (bytes) <- bytes = vm_dirty_bytes <--------+
thresh = f1(bytes) <- prioritizes vm_dirty_bytes |
else |
thresh = f2(ratio) |
ratelimit_pages = f3(dirty_thresh) |
vm_dirty_bytes = 0 <- it's late! ---------------------+
This causes ratelimit_pages to still use the value calculated based on
vm_dirty_bytes, which is wrong now.
The impact visible to userspace is difficult to capture directly because
there is no procfs/sysfs interface exported to user space. However, it
will have a real impact on the balance of dirty pages.
For example:
1. On default, we have vm_dirty_ratio=40, vm_dirty_bytes=0
2. echo 8192 > dirty_bytes, then vm_dirty_bytes=8192,
vm_dirty_ratio=0, and ratelimit_pages is calculated based on
vm_dirty_bytes now.
3. echo 20 > dirty_ratio, then since vm_dirty_bytes is not reset to
zero when writeback_set_ratelimit() -> global_dirty_limits() ->
domain_dirty_limits() is called, reallimit_pages is still calculated
based on vm_dirty_bytes instead of vm_dirty_ratio. This does not
conform to the actual intent of the user.
Link: https://lkml.kernel.org/r/20250415090232.7544-1-alexjlzheng@tencent.com
Fixes:
9d823e8f6b1b ("writeback: per task dirty rate limit")
Signed-off-by: Jinliang Zheng <alexjlzheng@tencent.com>
Reviewed-by: MengEn Sun <mengensun@tencent.com>
Cc: Andrea Righi <andrea@betterlinux.com>
Cc: Fenggaung Wu <fengguang.wu@intel.com>
Cc: Jinliang Zheng <alexjlzheng@tencent.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Andrew Morton [Mon, 12 May 2025 00:45:12 +0000 (17:45 -0700)]
Merge branch 'mm-hotfixes-stable' into mm-stable in order to successfully
merge mm-unstable's "mm: add folio_mk_pte()",
Barry Song [Thu, 8 May 2025 22:09:12 +0000 (10:09 +1200)]
mm: userfaultfd: correct dirty flags set for both present and swap pte
As David pointed out, what truly matters for mremap and userfaultfd move
operations is the soft dirty bit. The current comment and
implementation—which always sets the dirty bit for present PTEs and
fails to set the soft dirty bit for swap PTEs—are incorrect. This could
break features like Checkpoint-Restore in Userspace (CRIU).
This patch updates the behavior to correctly set the soft dirty bit for
both present and swap PTEs in accordance with mremap.
Link: https://lkml.kernel.org/r/20250508220912.7275-1-21cnbao@gmail.com
Fixes:
adef440691ba ("userfaultfd: UFFDIO_MOVE uABI")
Signed-off-by: Barry Song <v-songbaohua@oppo.com>
Reported-by: David Hildenbrand <david@redhat.com>
Closes: https://lore.kernel.org/linux-mm/
02f14ee1-923f-47e3-a994-
4950afb9afcc@redhat.com/
Acked-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Cc: Lokesh Gidra <lokeshgidra@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Sergey Senozhatsky [Wed, 7 May 2025 05:42:24 +0000 (14:42 +0900)]
zsmalloc: don't underflow size calculation in zs_obj_write()
Do not mix class->size and object size during offsets/sizes calculation in
zs_obj_write(). Size classes can merge into clusters, based on
objects-per-zspage and pages-per-zspage characteristics, so some size
classes can store objects smaller than class->size. This becomes
problematic when object size is much smaller than class->size. zsmalloc
can falsely decide that object spans two physical pages, because a larger
class->size value is used for that check, while the actual object is much
smaller and fits the free space of the first physical page, so there is
nothing to write to the second page and memcpy() size calculation
underflows.
Unable to handle kernel paging request at virtual address
ffffc00081ff4000
pc : __memcpy+0x10/0x24
lr : zs_obj_write+0x1b0/0x1d0 [zsmalloc]
Call trace:
__memcpy+0x10/0x24 (P)
zram_write_page+0x150/0x4fc [zram]
zram_submit_bio+0x5e0/0x6a4 [zram]
__submit_bio+0x168/0x220
submit_bio_noacct_nocheck+0x128/0x2c8
submit_bio_noacct+0x19c/0x2f8
This is mostly seen on system with larger page-sizes, because size class
cluters of such systems hold wider size ranges than on 4K PAGE_SIZE
systems.
Assume a 16K PAGE_SIZE system, a write of 820 bytes object to a 864-bytes
size class at offset 15560. 15560 + 864 is more than 16384 so zsmalloc
attempts to memcpy() it to two physical pages. However, 16384 - 15560 =
824 which is more than 820, so the object in fact doesn't span two
physical pages, and there is no data to write to the second physical page.
We always know the exact size in bytes of the object that we are about to
write (store), so use it instead of class->size.
Link: https://lkml.kernel.org/r/20250507054312.4135983-1-senozhatsky@chromium.org
Fixes:
44f76413496e ("zsmalloc: introduce new object mapping API")
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reported-by: Igor Belousov <igor.b@beldev.am>
Tested-by: Igor Belousov <igor.b@beldev.am>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Kirill A. Shutemov [Tue, 6 May 2025 13:32:07 +0000 (16:32 +0300)]
mm/page_alloc: fix race condition in unaccepted memory handling
The page allocator tracks the number of zones that have unaccepted memory
using static_branch_enc/dec() and uses that static branch in hot paths to
determine if it needs to deal with unaccepted memory.
Borislav and Thomas pointed out that the tracking is racy: operations on
static_branch are not serialized against adding/removing unaccepted pages
to/from the zone.
Sanity checks inside static_branch machinery detects it:
WARNING: CPU: 0 PID: 10 at kernel/jump_label.c:276 __static_key_slow_dec_cpuslocked+0x8e/0xa0
The comment around the WARN() explains the problem:
/*
* Warn about the '-1' case though; since that means a
* decrement is concurrent with a first (0->1) increment. IOW
* people are trying to disable something that wasn't yet fully
* enabled. This suggests an ordering problem on the user side.
*/
The effect of this static_branch optimization is only visible on
microbenchmark.
Instead of adding more complexity around it, remove it altogether.
Link: https://lkml.kernel.org/r/20250506133207.1009676-1-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Fixes:
dcdfdd40fa82 ("mm: Add support for unaccepted memory")
Link: https://lore.kernel.org/all/20250506092445.GBaBnVXXyvnazly6iF@fat_crate.local
Reported-by: Borislav Petkov <bp@alien8.de>
Tested-by: Borislav Petkov (AMD) <bp@alien8.de>
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Brendan Jackman <jackmanb@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: <stable@vger.kernel.org> [6.5+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Kirill A. Shutemov [Tue, 6 May 2025 11:25:08 +0000 (14:25 +0300)]
mm/page_alloc: ensure try_alloc_pages() plays well with unaccepted memory
try_alloc_pages() will not attempt to allocate memory if the system has
*any* unaccepted memory. Memory is accepted as needed and can remain in
the system indefinitely, causing the interface to always fail.
Rather than immediately giving up, attempt to use already accepted memory
on free lists.
Pass 'alloc_flags' to cond_accept_memory() and do not accept new memory
for ALLOC_TRYLOCK requests.
Found via code inspection - only BPF uses this at present and the
runtime effects are unclear.
Link: https://lkml.kernel.org/r/20250506112509.905147-2-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Fixes:
97769a53f117 ("mm, bpf: Introduce try_alloc_pages() for opportunistic page allocation")
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Brendan Jackman <jackmanb@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Lorenzo Stoakes [Tue, 6 May 2025 17:36:01 +0000 (18:36 +0100)]
MAINTAINERS: add mm GUP section
As part of the ongoing efforts to sub-divide memory management
maintainership and reviewership, establish a section for GUP (Get User
Pages) support and add appropriate maintainers and reviewers.
Link: https://lkml.kernel.org/r/20250506173601.97562-1-lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
David Wang [Mon, 5 May 2025 19:30:34 +0000 (03:30 +0800)]
mm/codetag: move tag retrieval back upfront in __free_pages()
Commit
51ff4d7486f0 ("mm: avoid extra mem_alloc_profiling_enabled()
checks") introduces a possible use-after-free scenario, when page
is non-compound, page[0] could be released by other thread right
after put_page_testzero failed in current thread, pgalloc_tag_sub_pages
afterwards would manipulate an invalid page for accounting remaining
pages:
[timeline] [thread1] [thread2]
| alloc_page non-compound
V
| get_page, rf counter inc
V
| in ___free_pages
| put_page_testzero fails
V
| put_page, page released
V
| in ___free_pages,
| pgalloc_tag_sub_pages
| manipulate an invalid page
V
Restore __free_pages() to its state before, retrieve alloc tag
beforehand.
Link: https://lkml.kernel.org/r/20250505193034.91682-1-00107082@163.com
Fixes:
51ff4d7486f0 ("mm: avoid extra mem_alloc_profiling_enabled() checks")
Signed-off-by: David Wang <00107082@163.com>
Acked-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Brendan Jackman <jackmanb@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Kairui Song [Fri, 25 Apr 2025 07:43:25 +0000 (15:43 +0800)]
mm/memory: fix mapcount / refcount sanity check for mTHP reuse
The following WARNING was triggered during swap stress test with mTHP
enabled:
[ 6609.335758] ------------[ cut here ]------------
[ 6609.337758] WARNING: CPU: 82 PID: 755116 at mm/memory.c:3794 do_wp_page+0x1084/0x10e0
[ 6609.340922] Modules linked in: zram virtiofs
[ 6609.342699] CPU: 82 UID: 0 PID: 755116 Comm: sh Kdump: loaded Not tainted 6.15.0-rc1+ #1429 PREEMPT(voluntary)
[ 6609.347620] Hardware name: Red Hat KVM/RHEL-AV, BIOS 0.0.0 02/06/2015
[ 6609.349909] RIP: 0010:do_wp_page+0x1084/0x10e0
[ 6609.351532] Code: ff ff 48 c7 c6 80 ba 49 82 4c 89 ef e8 95 fd fe ff 0f 0b bd f5 ff ff ff e9 43 fb ff ff 41 83 a9 bc 12 00 00 01 e9 5c fb ff ff <0f> 0b e9 a6 fc ff ff 65 ff 00 f0 48 0f b
a 6d 00 1f 0f 83 82 fc ff
[ 6609.357959] RSP: 0000:
ffffc90002273d40 EFLAGS:
00010287
[ 6609.359915] RAX:
000000000000000f RBX:
0000000000000000 RCX:
000fffffffe00000
[ 6609.362606] RDX:
0000000000000010 RSI:
000055a119ac1000 RDI:
ffffea000ae6ec00
[ 6609.365143] RBP:
ffffea000ae6ec68 R08:
84000002b9bb1025 R09:
000055a119ab6000
[ 6609.367569] R10:
ffff8881caa2ad80 R11:
0000000000000000 R12:
ffff8881caa2ad80
[ 6609.370255] R13:
ffffea000ae6ec00 R14:
000055a119ac1c9c R15:
ffffc90002273dd8
[ 6609.373007] FS:
00007f08e467f740(0000) GS:
ffff88a07c214000(0000) knlGS:
0000000000000000
[ 6609.375999] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 6609.377946] CR2:
000055a119ac1c9c CR3:
00000001adfd6005 CR4:
0000000000770eb0
[ 6609.380376] DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
[ 6609.382853] DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
[ 6609.385216] PKRU:
55555554
[ 6609.386141] Call Trace:
[ 6609.387017] <TASK>
[ 6609.387718] ? ___pte_offset_map+0x1b/0x110
[ 6609.389056] __handle_mm_fault+0xa51/0xf00
[ 6609.390363] ? exc_page_fault+0x6a/0x140
[ 6609.391629] handle_mm_fault+0x13d/0x360
[ 6609.392856] do_user_addr_fault+0x2f2/0x7f0
[ 6609.394160] ? sigprocmask+0x77/0xa0
[ 6609.395375] exc_page_fault+0x6a/0x140
[ 6609.396735] asm_exc_page_fault+0x26/0x30
[ 6609.398224] RIP: 0033:0x55a1050bc18b
[ 6609.399567] Code: 8b 3f 4d 85 ff 74 40 41 39 5f 18 75 f2 49 8b 7f 08 44 38 27 75 e9 4c 89 c6 4c 89 45 c8 e8 bd 83 fa ff 4c 8b 45 c8 85 c0 75 d5 <41> 83 47 1c 01 48 83 c4 28 4c 89 f8 5b 4
1 5c 41 5d 41 5e 41 5f 5d
[ 6609.405971] RSP: 002b:
00007ffcf5f37d90 EFLAGS:
00010246
[ 6609.407737] RAX:
0000000000000000 RBX:
00000000182768fa RCX:
0000000000000000
[ 6609.410151] RDX:
00000000000000fa RSI:
000055a105175c7b RDI:
000055a119ac1c60
[ 6609.412606] RBP:
00007ffcf5f37de0 R08:
000055a105175c7b R09:
0000000000000000
[ 6609.414998] R10:
000000004d2dfb5a R11:
0000000000000246 R12:
0000000000000050
[ 6609.417193] R13:
00000000000000fa R14:
000055a119abaf60 R15:
000055a119ac1c80
[ 6609.419268] </TASK>
[ 6609.419928] ---[ end trace
0000000000000000 ]---
The WARN_ON here is simply incorrect. The refcount here must be at least
the mapcount, not the opposite. Each mapcount must have a corresponding
refcount, but the refcount may increase if other components grab the
folio, which is acceptable. Meanwhile, having a mapcount larger than
refcount is a real problem.
So fix the WARN_ON condition.
Link: https://lkml.kernel.org/r/20250425074325.61833-1-ryncsn@gmail.com
Fixes:
1da190f4d0a6 ("mm: Copy-on-Write (COW) reuse support for PTE-mapped THP")
Signed-off-by: Kairui Song <kasong@tencent.com>
Reported-by: Kairui Song <kasong@tencent.com>
Closes: https://lore.kernel.org/all/CAMgjq7D+ea3eg9gRCVvRnto3Sv3_H3WVhupX4e=k8T5QAfBHbw@mail.gmail.com/
Suggested-by: David Hildenbrand <david@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
David Hildenbrand [Tue, 22 Apr 2025 14:49:42 +0000 (16:49 +0200)]
kernel/fork: only call untrack_pfn_clear() on VMAs duplicated for fork()
Not intuitive, but vm_area_dup() located in kernel/fork.c is not only used
for duplicating VMAs during fork(), but also for duplicating VMAs when
splitting VMAs or when mremap()'ing them.
VM_PFNMAP mappings can at least get ordinarily mremap()'ed (no change in
size) and apparently also shrunk during mremap(), which implies
duplicating the VMA in __split_vma() first.
In case of ordinary mremap() (no change in size), we first duplicate the
VMA in copy_vma_and_data()->copy_vma() to then call untrack_pfn_clear() on
the old VMA: we effectively move the VM_PAT reservation. So the
untrack_pfn_clear() call on the new VMA duplicating is wrong in that
context.
Splitting of VMAs seems problematic, because we don't duplicate/adjust the
reservation when splitting the VMA. Instead, in memtype_erase() -- called
during zapping/munmap -- we shrink a reservation in case only the end
address matches: Assume we split a VMA into A and B, both would share a
reservation until B is unmapped.
So when unmapping B, the reservation would be updated to cover only A.
When unmapping A, we would properly remove the now-shrunk reservation.
That scenario describes the mremap() shrinking (old_size > new_size),
where we split + unmap B, and the untrack_pfn_clear() on the new VMA when
is wrong.
What if we manage to split a VM_PFNMAP VMA into A and B and unmap A first?
It would be broken because we would never free the reservation. Likely,
there are ways to trigger such a VMA split outside of mremap().
Affecting other VMA duplication was not intended, vm_area_dup() being used
outside of kernel/fork.c was an oversight. So let's fix that for; how to
handle VMA splits better should be investigated separately.
With a simple reproducer that uses mprotect() to split such a VMA I can
trigger
x86/PAT: pat_mremap:26448 freeing invalid memtype [mem 0x00000000-0x00000fff]
Link: https://lkml.kernel.org/r/20250422144942.2871395-1-david@redhat.com
Fixes:
dc84bc2aba85 ("x86/mm/pat: Fix VM_PAT handling when fork() fails in copy_page_range()")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Rik van Riel <riel@surriel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Wupeng Ma [Thu, 10 Apr 2025 06:26:33 +0000 (14:26 +0800)]
mm: hugetlb: fix incorrect fallback for subpool
During our testing with hugetlb subpool enabled, we observe that
hstate->resv_huge_pages may underflow into negative values. Root cause
analysis reveals a race condition in subpool reservation fallback handling
as follow:
hugetlb_reserve_pages()
/* Attempt subpool reservation */
gbl_reserve = hugepage_subpool_get_pages(spool, chg);
/* Global reservation may fail after subpool allocation */
if (hugetlb_acct_memory(h, gbl_reserve) < 0)
goto out_put_pages;
out_put_pages:
/* This incorrectly restores reservation to subpool */
hugepage_subpool_put_pages(spool, chg);
When hugetlb_acct_memory() fails after subpool allocation, the current
implementation over-commits subpool reservations by returning the full
'chg' value instead of the actual allocated 'gbl_reserve' amount. This
discrepancy propagates to global reservations during subsequent releases,
eventually causing resv_huge_pages underflow.
This problem can be trigger easily with the following steps:
1. reverse hugepage for hugeltb allocation
2. mount hugetlbfs with min_size to enable hugetlb subpool
3. alloc hugepages with two task(make sure the second will fail due to
insufficient amount of hugepages)
4. with for a few seconds and repeat step 3 which will make
hstate->resv_huge_pages to go below zero.
To fix this problem, return corrent amount of pages to subpool during the
fallback after hugepage_subpool_get_pages is called.
Link: https://lkml.kernel.org/r/20250410062633.3102457-1-mawupeng1@huawei.com
Fixes:
1c5ecae3a93f ("hugetlbfs: add minimum size accounting to subpools")
Signed-off-by: Wupeng Ma <mawupeng1@huawei.com>
Tested-by: Joshua Hahn <joshua.hahnjy@gmail.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Ma Wupeng <mawupeng1@huawei.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Linus Torvalds [Sun, 11 May 2025 21:54:11 +0000 (14:54 -0700)]
Linux 6.15-rc6
Linus Torvalds [Sun, 11 May 2025 18:30:13 +0000 (11:30 -0700)]
Merge tag 'for-linus' of git://git./virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"ARM:
- Avoid use of uninitialized memcache pointer in user_mem_abort()
- Always set HCR_EL2.xMO bits when running in VHE, allowing
interrupts to be taken while TGE=0 and fixing an ugly bug on
AmpereOne that occurs when taking an interrupt while clearing the
xMO bits (AC03_CPU_36)
- Prevent VMMs from hiding support for AArch64 at any EL virtualized
by KVM
- Save/restore the host value for HCRX_EL2 instead of restoring an
incorrect fixed value
- Make host_stage2_set_owner_locked() check that the entire requested
range is memory rather than just the first page
RISC-V:
- Add missing reset of smstateen CSRs
x86:
- Forcibly leave SMM on SHUTDOWN interception on AMD CPUs to avoid
causing problems due to KVM stuffing INIT on SHUTDOWN (KVM needs to
sanitize the VMCB as its state is undefined after SHUTDOWN,
emulating INIT is the least awful choice).
- Track the valid sync/dirty fields in kvm_run as a u64 to ensure KVM
KVM doesn't goof a sanity check in the future.
- Free obsolete roots when (re)loading the MMU to fix a bug where
pre-faulting memory can get stuck due to always encountering a
stale root.
- When dumping GHCB state, use KVM's snapshot instead of the raw GHCB
page to print state, so that KVM doesn't print stale/wrong
information.
- When changing memory attributes (e.g. shared <=> private), add
potential hugepage ranges to the mmu_invalidate_range_{start,end}
set so that KVM doesn't create a shared/private hugepage when the
the corresponding attributes will become mixed (the attributes are
commited *after* KVM finishes the invalidation).
- Rework the SRSO mitigation to enable BP_SPEC_REDUCE only when KVM
has at least one active VM. Effectively BP_SPEC_REDUCE when KVM is
loaded led to very measurable performance regressions for non-KVM
workloads"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: SVM: Set/clear SRSO's BP_SPEC_REDUCE on 0 <=> 1 VM count transitions
KVM: arm64: Fix memory check in host_stage2_set_owner_locked()
KVM: arm64: Kill HCRX_HOST_FLAGS
KVM: arm64: Properly save/restore HCRX_EL2
KVM: arm64: selftest: Don't try to disable AArch64 support
KVM: arm64: Prevent userspace from disabling AArch64 support at any virtualisable EL
KVM: arm64: Force HCR_EL2.xMO to 1 at all times in VHE mode
KVM: arm64: Fix uninitialized memcache pointer in user_mem_abort()
KVM: x86/mmu: Prevent installing hugepages when mem attributes are changing
KVM: SVM: Update dump_ghcb() to use the GHCB snapshot fields
KVM: RISC-V: reset smstateen CSRs
KVM: x86/mmu: Check and free obsolete roots in kvm_mmu_reload()
KVM: x86: Check that the high 32bits are clear in kvm_arch_vcpu_ioctl_run()
KVM: SVM: Forcibly leave SMM mode on SHUTDOWN interception
Linus Torvalds [Sun, 11 May 2025 18:19:52 +0000 (11:19 -0700)]
Merge tag 'mips-fixes_6.15_1' of git://git./linux/kernel/git/mips/linux
Pull MIPS fixes from Thomas Bogendoerfer:
- Fix delayed timers
- Fix NULL pointer deref
- Fix wrong range check
* tag 'mips-fixes_6.15_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: Fix MAX_REG_OFFSET
MIPS: CPS: Fix potential NULL pointer dereferences in cps_prepare_cpus()
MIPS: rename rollback_handler with skipover_handler
MIPS: Move r4k_wait() to .cpuidle.text section
MIPS: Fix idle VS timer enqueue
Linus Torvalds [Sun, 11 May 2025 18:08:55 +0000 (11:08 -0700)]
Merge tag 'x86-urgent-2025-05-11' of git://git./linux/kernel/git/tip/tip
Pull x86 fix from Ingo Molnar:
"Fix a boot regression on very old x86 CPUs without CPUID support"
* tag 'x86-urgent-2025-05-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/microcode: Consolidate the loader enablement checking
Linus Torvalds [Sun, 11 May 2025 17:33:25 +0000 (10:33 -0700)]
Merge tag 'timers-urgent-2025-05-11' of git://git./linux/kernel/git/tip/tip
Pull misc timers fixes from Ingo Molnar:
- Fix time keeping bugs in CLOCK_MONOTONIC_COARSE clocks
- Work around absolute relocations into vDSO code that GCC erroneously
emits in certain arm64 build environments
- Fix a false positive lockdep warning in the i8253 clocksource driver
* tag 'timers-urgent-2025-05-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource/i8253: Use raw_spinlock_irqsave() in clockevent_i8253_disable()
arm64: vdso: Work around invalid absolute relocations from GCC
timekeeping: Prevent coarse clocks going backwards
Linus Torvalds [Sun, 11 May 2025 17:29:29 +0000 (10:29 -0700)]
Merge tag 'input-for-v6.15-rc5' of git://git./linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- Synaptics touchpad on multiple laptops (Dynabook Portege X30L-G,
Dynabook Portege X30-D, TUXEDO InfinityBook Pro 14 v5, Dell Precision
M3800, HP Elitebook 850 G1) switched from PS/2 to SMBus mode
- a number of new controllers added to xpad driver: HORI Drum
controller, PowerA Fusion Pro 4, PowerA MOGA XP-Ultra controller,
8BitDo Ultimate 2 Wireless Controller, 8BitDo Ultimate 3-mode
Controller, Hyperkin DuchesS Xbox One controller
- fixes to xpad driver to properly handle Mad Catz JOYTECH NEO SE
Advanced and PDP Mirror's Edge Official controllers
- fixes to xpad driver to properly handle "Share" button on some
controllers
- a fix for device initialization timing and for waking up the
controller in cyttsp5 driver
- a fix for hisi_powerkey driver to properly wake up from s2idle state
- other assorted cleanups and fixes
* tag 'input-for-v6.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: xpad - fix xpad_device sorting
Input: xpad - add support for several more controllers
Input: xpad - fix Share button on Xbox One controllers
Input: xpad - fix two controller table values
Input: hisi_powerkey - enable system-wakeup for s2idle
Input: synaptics - enable InterTouch on Dell Precision M3800
Input: synaptics - enable InterTouch on TUXEDO InfinityBook Pro 14 v5
Input: synaptics - enable InterTouch on Dynabook Portege X30L-G
Input: synaptics - enable InterTouch on Dynabook Portege X30-D
Input: synaptics - enable SMBus for HP Elitebook 850 G1
Input: mtk-pmic-keys - fix possible null pointer dereference
Input: xpad - add support for 8BitDo Ultimate 2 Wireless Controller
Input: cyttsp5 - fix power control issue on wakeup
MAINTAINERS: .mailmap: update Mattijs Korpershoek's email address
dt-bindings: mediatek,mt6779-keypad: Update Mattijs' email address
Input: stmpe-ts - use module alias instead of device table
Input: cyttsp5 - ensure minimum reset pulse width
Input: sparcspkr - avoid unannotated fall-through
input/joystick: magellan: Mark __nonstring look-up table
Linus Torvalds [Sun, 11 May 2025 17:23:53 +0000 (10:23 -0700)]
Merge tag 'fixes-2025-05-11' of git://git./linux/kernel/git/rppt/memblock
Pull memblock fixes from Mike Rapoport:
- Mark set_high_memory() as __init to fix section mismatch
- Accept memory allocated in memblock_double_array() to mitigate crash
of SNP guests
* tag 'fixes-2025-05-11' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
memblock: Accept allocated memory before use in memblock_double_array()
mm,mm_init: Mark set_high_memory as __init
Vicki Pfau [Sun, 11 May 2025 06:06:34 +0000 (23:06 -0700)]
Input: xpad - fix xpad_device sorting
A recent commit put one entry in the wrong place. This just moves it to the
right place.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Link: https://lore.kernel.org/r/20250328234345.989761-5-vi@endrift.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Vicki Pfau [Sun, 11 May 2025 06:00:10 +0000 (23:00 -0700)]
Input: xpad - add support for several more controllers
This adds support for several new controllers, all of which include
Share buttons:
- HORI Drum controller
- PowerA Fusion Pro 4
- 8BitDo Ultimate 3-mode Controller
- Hyperkin DuchesS Xbox One controller
- PowerA MOGA XP-Ultra controller
Signed-off-by: Vicki Pfau <vi@endrift.com>
Link: https://lore.kernel.org/r/20250328234345.989761-4-vi@endrift.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Vicki Pfau [Sun, 11 May 2025 05:59:25 +0000 (22:59 -0700)]
Input: xpad - fix Share button on Xbox One controllers
The Share button, if present, is always one of two offsets from the end of the
file, depending on the presence of a specific interface. As we lack parsing for
the identify packet we can't automatically determine the presence of that
interface, but we can hardcode which of these offsets is correct for a given
controller.
More controllers are probably fixable by adding the MAP_SHARE_BUTTON in the
future, but for now I only added the ones that I have the ability to test
directly.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Link: https://lore.kernel.org/r/20250328234345.989761-2-vi@endrift.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Vicki Pfau [Fri, 28 Mar 2025 23:43:36 +0000 (16:43 -0700)]
Input: xpad - fix two controller table values
Two controllers -- Mad Catz JOYTECH NEO SE Advanced and PDP Mirror's
Edge Official -- were missing the value of the mapping field, and thus
wouldn't detect properly.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Link: https://lore.kernel.org/r/20250328234345.989761-1-vi@endrift.com
Fixes:
540602a43ae5 ("Input: xpad - add a few new VID/PID combinations")
Fixes:
3492321e2e60 ("Input: xpad - add multiple supported devices")
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Ulf Hansson [Thu, 6 Mar 2025 11:50:21 +0000 (12:50 +0100)]
Input: hisi_powerkey - enable system-wakeup for s2idle
To wake up the system from s2idle when pressing the power-button, let's
convert from using pm_wakeup_event() to pm_wakeup_dev_event(), as it allows
us to specify the "hard" in-parameter, which needs to be set for s2idle.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20250306115021.797426-1-ulf.hansson@linaro.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Linus Torvalds [Sat, 10 May 2025 22:50:56 +0000 (15:50 -0700)]
Merge tag 'mm-hotfixes-stable-2025-05-10-14-23' of git://git./linux/kernel/git/akpm/mm
Pull misc hotfixes from Andrew Morton:
"22 hotfixes. 13 are cc:stable and the remainder address post-6.14
issues or aren't considered necessary for -stable kernels.
About half are for MM. Five OCFS2 fixes and a few MAINTAINERS updates"
* tag 'mm-hotfixes-stable-2025-05-10-14-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (22 commits)
mm: fix folio_pte_batch() on XEN PV
nilfs2: fix deadlock warnings caused by lock dependency in init_nilfs()
mm/hugetlb: copy the CMA flag when demoting
mm, swap: fix false warning for large allocation with !THP_SWAP
selftests/mm: fix a build failure on powerpc
selftests/mm: fix build break when compiling pkey_util.c
mm: vmalloc: support more granular vrealloc() sizing
tools/testing/selftests: fix guard region test tmpfs assumption
ocfs2: stop quota recovery before disabling quotas
ocfs2: implement handshaking with ocfs2 recovery thread
ocfs2: switch osb->disable_recovery to enum
mailmap: map Uwe's BayLibre addresses to a single one
MAINTAINERS: add mm THP section
mm/userfaultfd: fix uninitialized output field for -EAGAIN race
selftests/mm: compaction_test: support platform with huge mount of memory
MAINTAINERS: add core mm section
ocfs2: fix panic in failed foilio allocation
mm/huge_memory: fix dereferencing invalid pmd migration entry
MAINTAINERS: add reverse mapping section
x86: disable image size check for test builds
...
Linus Torvalds [Sat, 10 May 2025 16:53:11 +0000 (09:53 -0700)]
Merge tag 'driver-core-6.15-rc6' of git://git./linux/kernel/git/driver-core/driver-core
Pull driver core fix from Greg KH:
"Here is a single driver core fix for a regression for platform devices
that is a regression from a change that went into 6.15-rc1 that
affected Pixel devices. It has been in linux-next for over a week with
no reported problems"
* tag 'driver-core-6.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core:
platform: Fix race condition during DMA configure at IOMMU probe time
Linus Torvalds [Sat, 10 May 2025 16:18:05 +0000 (09:18 -0700)]
Merge tag 'usb-6.15-rc6' of git://git./linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB driver fixes for 6.15-rc6. Included in here
are:
- typec driver fixes
- usbtmc ioctl fixes
- xhci driver fixes
- cdnsp driver fixes
- some gadget driver fixes
Nothing really major, just all little stuff that people have reported
being issues. All of these have been in linux-next this week with no
reported issues"
* tag 'usb-6.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
xhci: dbc: Avoid event polling busyloop if pending rx transfers are inactive.
usb: xhci: Don't trust the EP Context cycle bit when moving HW dequeue
usb: usbtmc: Fix erroneous generic_read ioctl return
usb: usbtmc: Fix erroneous wait_srq ioctl return
usb: usbtmc: Fix erroneous get_stb ioctl error returns
usb: typec: tcpm: delay SNK_TRY_WAIT_DEBOUNCE to SRC_TRYWAIT transition
USB: usbtmc: use interruptible sleep in usbtmc_read
usb: cdnsp: fix L1 resume issue for RTL_REVISION_NEW_LPM version
usb: typec: ucsi: displayport: Fix NULL pointer access
usb: typec: ucsi: displayport: Fix deadlock
usb: misc: onboard_usb_dev: fix support for Cypress HX3 hubs
usb: uhci-platform: Make the clock really optional
usb: dwc3: gadget: Make gadget_wakeup asynchronous
usb: gadget: Use get_status callback to set remote wakeup capability
usb: gadget: f_ecm: Add get_status callback
usb: host: tegra: Prevent host controller crash when OTG port is used
usb: cdnsp: Fix issue with resuming from L1
usb: gadget: tegra-xudc: ACK ST_RC after clearing CTRL_RUN
Linus Torvalds [Sat, 10 May 2025 16:08:19 +0000 (09:08 -0700)]
Merge tag 'staging-6.15-rc6' of git://git./linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are three small staging driver fixes for 6.15-rc6. These are:
- bcm2835-camera driver fix
- two axis-fifo driver fixes
All of these have been in linux-next for a few weeks with no reported
issues"
* tag 'staging-6.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: axis-fifo: Remove hardware resets for user errors
staging: axis-fifo: Correct handling of tx_fifo_depth for size validation
staging: bcm2835-camera: Initialise dev in v4l2_dev
Linus Torvalds [Sat, 10 May 2025 15:55:15 +0000 (08:55 -0700)]
Merge tag 'char-misc-6.15-rc6' of git://git./linux/kernel/git/gregkh/char-misc
Pull char/misc/IIO driver fixes from Greg KH:
"Here are a bunch of small driver fixes (mostly all IIO) for 6.15-rc6.
Included in here are:
- loads of tiny IIO driver fixes for reported issues
- hyperv driver fix for a much-reported and worked on sysfs ring
buffer creation bug
All of these have been in linux-next for over a week (the IIO ones for
many weeks now), with no reported issues"
* tag 'char-misc-6.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (30 commits)
Drivers: hv: Make the sysfs node size for the ring buffer dynamic
uio_hv_generic: Fix sysfs creation path for ring buffer
iio: adis16201: Correct inclinometer channel resolution
iio: adc: ad7606: fix serial register access
iio: pressure: mprls0025pa: use aligned_s64 for timestamp
iio: imu: adis16550: align buffers for timestamp
staging: iio: adc: ad7816: Correct conditional logic for store mode
iio: adc: ad7266: Fix potential timestamp alignment issue.
iio: adc: ad7768-1: Fix insufficient alignment of timestamp.
iio: adc: dln2: Use aligned_s64 for timestamp
iio: accel: adxl355: Make timestamp 64-bit aligned using aligned_s64
iio: temp: maxim-thermocouple: Fix potential lack of DMA safe buffer.
iio: chemical: pms7003: use aligned_s64 for timestamp
iio: chemical: sps30: use aligned_s64 for timestamp
iio: imu: inv_mpu6050: align buffer for timestamp
iio: imu: st_lsm6dsx: Fix wakeup source leaks on device unbind
iio: adc: qcom-spmi-iadc: Fix wakeup source leaks on device unbind
iio: accel: fxls8962af: Fix wakeup source leaks on device unbind
iio: adc: ad7380: fix event threshold shift
iio: hid-sensor-prox: Fix incorrect OFFSET calculation
...
Linus Torvalds [Sat, 10 May 2025 15:52:41 +0000 (08:52 -0700)]
Merge tag 'i2c-for-6.15-rc6' of git://git./linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
- omap: use correct function to read from device tree
- MAINTAINERS: remove Seth from ISMT maintainership
* tag 'i2c-for-6.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
MAINTAINERS: Remove entry for Seth Heasley
i2c: omap: fix deprecated of_property_read_bool() use
Linus Torvalds [Sat, 10 May 2025 15:44:36 +0000 (08:44 -0700)]
Merge tag 'for-linus-6.15a-rc6-tag' of git://git./linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
- A fix for the xenbus driver allowing to use a PVH Dom0 with
Xenstore running in another domain
- A fix for the xenbus driver addressing a rare race condition
resulting in NULL dereferences and other problems
- A fix for the xen-swiotlb driver fixing a problem seen on Arm
platforms
* tag 'for-linus-6.15a-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xenbus: Use kref to track req lifetime
xenbus: Allow PVH dom0 a non-local xenstore
xen: swiotlb: Use swiotlb bouncing if kmalloc allocation demands it
Linus Torvalds [Sat, 10 May 2025 15:36:07 +0000 (08:36 -0700)]
Merge tag 'pull-fixes' of git://git./linux/kernel/git/viro/vfs
Pull mount fixes from Al Viro:
"A couple of races around legalize_mnt vs umount (both fairly old and
hard to hit) plus two bugs in move_mount(2) - both around 'move
detached subtree in place' logics"
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fix IS_MNT_PROPAGATING uses
do_move_mount(): don't leak MNTNS_PROPAGATING on failures
do_umount(): add missing barrier before refcount checks in sync case
__legitimize_mnt(): check for MNT_SYNC_UMOUNT should be under mount_lock
Paolo Bonzini [Sat, 10 May 2025 15:11:06 +0000 (11:11 -0400)]
Merge tag 'kvm-x86-fixes-6.15-rcN' of https://github.com/kvm-x86/linux into HEAD
KVM x86 fixes for 6.15-rcN
- Forcibly leave SMM on SHUTDOWN interception on AMD CPUs to avoid causing
problems due to KVM stuffing INIT on SHUTDOWN (KVM needs to sanitize the
VMCB as its state is undefined after SHUTDOWN, emulating INIT is the
least awful choice).
- Track the valid sync/dirty fields in kvm_run as a u64 to ensure KVM
KVM doesn't goof a sanity check in the future.
- Free obsolete roots when (re)loading the MMU to fix a bug where
pre-faulting memory can get stuck due to always encountering a stale
root.
- When dumping GHCB state, use KVM's snapshot instead of the raw GHCB page
to print state, so that KVM doesn't print stale/wrong information.
- When changing memory attributes (e.g. shared <=> private), add potential
hugepage ranges to the mmu_invalidate_range_{start,end} set so that KVM
doesn't create a shared/private hugepage when the the corresponding
attributes will become mixed (the attributes are commited *after* KVM
finishes the invalidation).
- Rework the SRSO mitigation to enable BP_SPEC_REDUCE only when KVM has at
least one active VM. Effectively BP_SPEC_REDUCE when KVM is loaded led
to very measurable performance regressions for non-KVM workloads.
Paolo Bonzini [Sat, 10 May 2025 15:10:02 +0000 (11:10 -0400)]
Merge tag 'kvmarm-fixes-6.15-3' of https://git./linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.15, round #3
- Avoid use of uninitialized memcache pointer in user_mem_abort()
- Always set HCR_EL2.xMO bits when running in VHE, allowing interrupts
to be taken while TGE=0 and fixing an ugly bug on AmpereOne that
occurs when taking an interrupt while clearing the xMO bits
(AC03_CPU_36)
- Prevent VMMs from hiding support for AArch64 at any EL virtualized by
KVM
- Save/restore the host value for HCRX_EL2 instead of restoring an
incorrect fixed value
- Make host_stage2_set_owner_locked() check that the entire requested
range is memory rather than just the first page
Paolo Bonzini [Sat, 10 May 2025 15:09:26 +0000 (11:09 -0400)]
Merge tag 'kvm-riscv-fixes-6.15-1' of https://github.com/kvm-riscv/linux into HEAD
KVM/riscv fixes for 6.15, take #1
- Add missing reset of smstateen CSRs
Wolfram Sang [Sat, 10 May 2025 09:41:13 +0000 (11:41 +0200)]
Merge tag 'i2c-host-fixes-6.15-rc6' of git://git./linux/kernel/git/andi.shyti/linux into i2c/for-current
i2c-host-fixes for v6.15-rc6
- omap: use correct function to read from device tree
- MAINTAINERS: remove Seth from ISMT maintainership
Linus Torvalds [Fri, 9 May 2025 23:45:21 +0000 (16:45 -0700)]
Merge tag '6.15-rc5-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
- Fix dentry leak which can cause umount crash
- Add warning for parse contexts error on compounded operation
* tag '6.15-rc5-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: client: Avoid race in open_cached_dir with lease breaks
smb3 client: warn when parse contexts returns error on compounded operation
projects / linux-block.git / log