ALSA: pcm: playback silence - move silence variable updates to separate function

The code tracking the added samples in thresholded mode and the code
tracking the just played samples in top-up mode are semantically
identical, so factor it out to a common function to enhance readability.

Co-developed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230505155244.2312199-5-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: pcm: playback silence - remove extra code

The removed condition handles de facto only one situation where
runtime->silence_filled variable is equal to runtime->buffer_size,
because this variable cannot go over the buffer size. This case is
implicitly caught by the required comparison of the noise distance
with the threshold.

Suggested-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230505155244.2312199-4-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: pcm: fix playback silence - correct incremental silencing

Commit 9a826ddba6e ("[ALSA] pcm core: fix silence_start calculations")
came with exactly the right commit message, but the patch just made
things broken in a different way: We'd fill at a too low address if the
area was already partially zeroed, so we'd under-fill. This affected
both thresholded mode (where it was somewhat less likely) and top-up
mode (where it would be the case consistently).

Co-developed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230505155244.2312199-3-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: pcm: fix playback silence - use the actual new_hw_ptr for the threshold mode

The snd_pcm_playback_hw_avail() function uses runtime->status->hw_ptr.
Unfortunately, in case when we call this function from snd_pcm_update_hw_ptr0(),
this variable contains the previous hardware pointer. Use the new_hw_ptr
argument to calculate hw_avail (filled samples by the user space) to
correct the threshold comparison.

The new_hw_ptr argument may also be set to ULONG_MAX which means the
initialization phase. In this case, use runtime->status->hw_ptr.

Suggested-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230505155244.2312199-2-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: pcm: Revert "ALSA: pcm: rewrite snd_pcm_playback_silence()"

This reverts commit 9f656705c5faa18afb26d922cfc64f9fd103c38d.

There was a regression (in the top-up mode). Unfortunately, the patch
provided from the author of this commit is not easy to review.

Keep the updated and new comments in headers.
Also add a new comment that documents the missed API constraint which
led to the regression.

Reported-by: Jeff Chua <jeff.chua.linux@gmail.com>
Link: https://lore.kernel.org/r/CAAJw_ZsbTVd3Es373x_wTNDF7RknGhCD0r+NKUSwAO7HpLAkYA@mail.gmail.com
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230505155244.2312199-1-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: hda/realtek: Fix mute and micmute LEDs for an HP laptop

There's another laptop that needs the fixup to enable mute and micmute
LEDs. So do it accordingly.

Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230505125925.543601-1-kai.heng.feng@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Merge tag 'asoc-fix-v6.4-rc1' of https://git./linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.4

A small set of fixes and device quirks that have come in during the
merge window, the Qualcomm fix seems quite large but it's mainly code
motion so looks larger than it is.

ALSA: caiaq: input: Add error handling for unsupported input methods in `snd_usb_caiaq_input_init`

Smatch complains that:
snd_usb_caiaq_input_init() warn: missing error code 'ret'

This patch adds a new case to handle the situation where the
device does not support any input methods in the
`snd_usb_caiaq_input_init` function. It returns an `-EINVAL` error code
to indicate that no input methods are supported on the device.

Fixes: 523f1dce3743 ("[ALSA] Add Native Instrument usb audio device support")
Signed-off-by: Ruliang Lin <u202112092@hust.edu.cn>
Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn>
Acked-by: Daniel Mack <daniel@zonque.org>
Link: https://lore.kernel.org/r/20230504065054.3309-1-u202112092@hust.edu.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: Add quirk for Pioneer DDJ-800

One more Pioneer quirk, this time for DDJ-800, which is quite similar like
other DJ DDJ models but with slightly different EPs or channels.

Signed-off-by: Geraldo Nascimento <geraldogabriel@gmail.com>
Tested-by: Grégory Desor <gregory.desor@free.fr>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/ZFLLzgEcsSF5aIHG@geday
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: hda/realtek: support HP Pavilion Aero 13-be0xxx Mute LED

This patch adds support for the mute LED on the HP Pavilion Aero Laptop
13-be0xxx. The current behavior is that the LED does not turn on at any
time and does not indicate to the user whether the sound is muted.

The solution is to add a PCI quirk to properly recognize and support the
LED on this device.

This change has been tested on the device in question using modified
versions of kernels 6.0.7-6.2.12 on Arch Linux.

Signed-off-by: Caleb Harper <calebharp2005@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230503175026.6796-1-calebharp2005@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ASoC: Intel: soc-acpi-cht: Add quirk for Nextbook Ares 8A tablet

The Nextbook Ares 8A tablet which has Android as factory OS, has a buggy
DSDT with both ESSX8316 and 10EC5651 ACPI devices.

This tablet actually uses an rt5651 codec, but the matching code ends up
picking the ESSX8316 device, add a quirk to ignote the ESSX8316 device
on this tablet.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Message-Id: <20230429104721.7176-1-hdegoede@redhat.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: amd: yc: Add Asus VivoBook Pro 14 OLED M6400RC to the quirks list for acp6x

This is needed (and enough) to get the internal mic visible and working.

Signed-off-by: Andrey Rakhmatullin <wrar@wrar.name>
Message-Id: <20230501185134.34591-1-wrar@wrar.name>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: codecs: wcd938x: fix accessing regmap on unattached devices

The WCD938x comes with three devices on two Linux drivers:
1. RX Soundwire device (wcd938x-sdw.c driver),
2. TX Soundwire device, which is used to access devices via regmap (also
   wcd938x-sdw.c driver),
3. platform device (wcd938x.c driver) - glue and component master,
   actually having most of the code using TX Soundwire device regmap.

When RX and TX Soundwire devices probe, the component master (platform
device) bind tries to write micbias configuration via TX Soundwire
regmap.  This might happen before TX Soundwire enumerates, so the regmap
access fails.  On Qualcomm SM8550 board with WCD9385:

  qcom-soundwire 6d30000.soundwire-controller: Qualcomm Soundwire controller v2.0.0 Registered
  wcd938x_codec audio-codec: bound sdw:0:0217:010d:00:4 (ops wcd938x_sdw_component_ops)
  wcd938x_codec audio-codec: bound sdw:0:0217:010d:00:3 (ops wcd938x_sdw_component_ops)
  qcom-soundwire 6ad0000.soundwire-controller: swrm_wait_for_wr_fifo_avail err write overflow

Fix the issue by:
1. Moving the regmap creation from platform device to TX Soundwire
   device.  The regmap settings are moved as-is with one difference:
   making the wcd938x_regmap_config const.
2. Using regmap in cache only mode till the actual TX Soundwire device
   enumerates and then sync the regmap cache.

Cc: <stable@vger.kernel.org> # v3.14+
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Message-Id: <20230503144102.242240-1-krzysztof.kozlowski@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

ALSA: docs: Fix code block indentation in ALSA driver example

Sphinx reports htmldocs warnings:

Documentation/sound/kernel-api/writing-an-alsa-driver.rst:3997: WARNING: Literal block expected; none found.
Documentation/sound/kernel-api/writing-an-alsa-driver.rst:4004: WARNING: Literal block expected; none found.
Documentation/sound/kernel-api/writing-an-alsa-driver.rst:4009: WARNING: Unexpected indentation.
Documentation/sound/kernel-api/writing-an-alsa-driver.rst:4035: WARNING: Literal block expected; none found.

These are due to indentation of example driver snippets which is outside
the code block scope.

Fix these by indenting code blocks in question to the scope.

Fixes: 4d421eebe1465d ("ALSA: docs: writing-an-alsa-driver.rst: polishing")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/linux-doc/202305021822.4U6XOvGf-lkp@intel.com/
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Link: https://lore.kernel.org/r/20230503035416.62722-1-bagasdotme@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: docs: Extend module parameters description

Common ALSA module parameters look a little bit confusing because of the
description lacking, and it took me a while to understand the purpose of
their existence. To figure it out I asked the question about them to the
"alsa-devel" mailing list, and Takashi Iwai answered me with the text I
appended to the ALSA documentation in this patch.

These common module parameters aren't used a lot nowadays, but as I
understand they are important for providing compatibility with some
existing user-space apps. So in my opinion it is a good idea to document
why we need them.

Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Link: https://lore.kernel.org/r/20230501101634.476297-1-ivan.orlov0322@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: hda/realtek: Add quirk for ASUS UM3402YAR using CS35L41

This Asus Zenbook laptop uses Realtek HDA codec combined with
2xCS35L41 Amplifiers using I2C with External Boost.

Signed-off-by: Mark Asselstine <asselsm@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230501231346.54979-1-asselsm@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: emu10k1: use more existing defines instead of open-coded numbers

Using the *_MASK defines for "maximal value" is debatable. I got the
idea from FreeBSD, and it sorta makes sense to me.

Some hunks look a bit incomplete, because code that is going to be
subsequently removed is not touched here.

Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230428080732.1697695-1-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ASoC: amd: yc: Add ASUS M3402RA into DMI table

Fix builtin microphone on ASUS Vivobook S 14 OLED 2022 (M3402RA)

Same issue with this model as apparently with other Rembrandt laptops: https://bugzilla.kernel.org/show_bug.cgi?id=216270

Signed-off-by: Enrico Belleri <kilgore.trout@idesmi.eu>
Link: https://lore.kernel.org/r/20230427191645.24519-1-kilgore.trout@idesmi.eu
Signed-off-by: Mark Brown <broonie@kernel.org>

ALSA: hda/realtek: Add quirk for ThinkPad P1 Gen 6

Lenovo ThinkPad P1 Gen 6 laptop has 2 CS35L41 amplifies
on I2C bus connected to Realtek codec.

Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230427110452.13787-1-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Merge branch 'for-linus' into for-next

Merge 6.3-devel branch back in order to apply the more Realtek HD-audio
changes cleanly.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: hda: Glenfly: add HD Audio PCI IDs and HDMI Codec Vendor IDs.

Add a set of HD Audio PCI IDS, and the HDMI codec vendor IDs for
Glenfly Gpus.

- In default_bdl_pos_adj, set bdl to 128 as Glenfly Gpus have hardware
limitation, need to increase hdac interrupt interval.
- In azx_first_init, enable polling mode for Glenfly Gpu. When the codec
complete the command, it sends interrupt and writes response entries to
memory, howerver, the write requests sometimes are not actually
synchronized to memory when driver handle hdac interrupt on Glenfly Gpus.
If the RIRB status is not updated in the interrupt handler,
azx_rirb_get_response keeps trying to recevie a response from rirb until
1s timeout. Enabling polling mode for Glenfly Gpu can fix the issue.
- In patch_gf_hdmi, set Glenlfy Gpu Codec's no_sticky_stream as it need
driver to do actual clean-ups for the linked codec when switch from one
codec to another.

Signed-off-by: jasontao <jasontao@glenfly.com>
Signed-off-by: Reaper Li <reaperlioc@glenfly.com>
Link: https://lore.kernel.org/r/20230426013059.4329-1-reaperlioc@glenfly.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ASoC: Intel: soc-acpi-byt: Fix "WM510205" match no longer working

Commit 7e1d728a94ca ("ASoC: Intel: soc-acpi-byt: Add new WM5102 ACPI HID")
added an extra HID to wm5102_comp_ids.codecs, but it forgot to bump
wm5102_comp_ids.num_codecs, causing the last codec HID in the codecs list
to no longer work.

Bump wm5102_comp_ids.num_codecs to fix this.

Fixes: 7e1d728a94ca ("ASoC: Intel: soc-acpi-byt: Add new WM5102 ACPI HID")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230421183714.35186-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: max98090: make it selectable

There is no way to select max98090 from menuconfig right now.
Add a Kconfig menu description to allow building the driver standalone.
It will allow this codec to be used by any other I2S master without
adding extra sound card entry in Kconfig.

Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru>
Link: https://lore.kernel.org/r/20230421211950.20972-1-fido_max@inbox.ru
Signed-off-by: Mark Brown <broonie@kernel.org>

Merge tag 'asoc-v6.4' of https://git./linux/kernel/git/broonie/sound into for-next

ASoC: Updates for v6.4

The bulk of the commits here are for the conversion of drivers to use
void remove callbacks but there's a reasonable amount of other stuff
going on, the pace of development with the SOF code continues to be high
and there's a bunch of new drivers too:

 - More core cleanups from Morimto-san.
 - Update drivers to have remove() callbacks returning void, mostly
   mechanical with some substantial changes.
 - Continued feature and simplification work on SOF, including addition
   of a no-DSP mode for bringup, HDA MLink and extensions to the IPC4
   protocol.
 - Hibernation support for CS35L45.
 - More DT binding conversions.
 - Support for Cirrus Logic CS35L56, Freescale QMC, Maxim MAX98363,
   nVidia systems with MAX9809x and RT5631, Realtek RT712, Renesas R-Car
   Gen4, Rockchip RK3588 and TI TAS5733.

ALSA: emu10k1: use high-level I/O in set_filterQ()

This makes the code shorter and more legible.

Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230423181002.1246793-2-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: emu10k1: use high-level I/O functions also during init

... and also use more pre-defined constants on the way (some of which
required adjustment).

Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230422161021.1143967-1-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: emu10k1: fix error handling in snd_audigy_i2c_volume_put()

Check all inputs before changing anything, and return the right error
code in case of failure.

Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230422161021.1144026-1-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: emu10k1: don't stop DSP in _snd_emu10k1_{,audigy_}init_efx()

These functions don't actually touch the DSP until they poke the code
into it, at which point it's temporarily stopped anyway. And fx8010.dbg
is already zero anyway.

Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230422161021.1144004-2-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: emu10k1: fix SNDRV_EMU10K1_IOCTL_SINGLE_STEP

- Use correct address limit for Audigy
- Use the right constant to actually make a step on Audigy
- Don't store *_DBG_STEP and the address in emu->fx8010.dbg, as
  otherwise unrelated operations would make steps, too

This is untested. as10k1 was never ported to Audigy anyway.

Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230422161021.1144004-1-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: emu10k1: skip Sound Blaster-specific hacks for E-MU cards

The rev2 cards use CA0108, but the embedded P17V goes entirely unused.
Also, A_IOCTL (which is really the GPIO port) is actually the FPGA
control port, so messing with it is no good idea.

The hacks are actually mutually exclusive, so make that explicit while
we're at it.

Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230422161021.1143888-1-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: emu10k1: fixup DSP defines

Firstly, fix the distribution between public and private headers.
Otherwise, some of the already public macros wouldn't actually work, and
the SNDRV_EMU10K1_IOCTL_DBG_READ result for Audigy would be useless.

Secondly, add condition code registers for Audigy. These are just
aliases for selected constant registers, and thus are generation-
specific. At least A_CC_REG_ZERO is actually correct ...

Finally, shuffle around some defines to more logical places while at it,
and fix up some more comments.

Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230422161021.1143903-7-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: emu10k1: pull in some register definitions from kX-project

For documentation purposes and later use.

Some pre-existing but (mostly) unused definitions were renamed for
consistency.

Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230422161021.1143903-6-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: emu10k1: remove some bogus defines

Firstly, remove the FXWC_* defines - the comment on FXWC implies that
the relevant defines are the (A_)EXTOUT_* ones. It's unclear where this
came from - it was in the initial ALSA import, but neither the driver
from Creative nor kX-project have these defines.

Secondly, remove A_HR, which made plain no sense (was unused, and
clashed with FXRT). Amends commit cbb7d8f9b7b ("emu10k1: Update
registers defines for the Audigy 2/emu10k2.5").

Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230422161021.1143903-5-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: emu10k1: eliminate some unused defines

One might be mislead to think that these mean anything.

Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230422161021.1143903-4-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: emu10k1: fix lineup of EMU_HANA_* defines

The bit values are supposed to be internally indented by one step
relative to the register addresses.

Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230422161021.1143903-3-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: emu10k1: comment updates

Move comments to better locations, de-duplicate, fix/remove incorrect/
outdated ones, add new ones, and unify spacing somewhat.

While at it, also add testing credits for Jonathan Dowland (SB Live!
Platinum) and myself (E-MU 0404b).

Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230422161021.1143903-2-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: emu10k1: fix snd_emu1010_fpga_read() input masking for rev2 cards

Unlike the Alice2 chips used on 1st generation E-MU cards, the
Tina/Tina2 chips used on the 2nd gen cards have only six GPIN pins,
which means that we need to use a smaller mask. Failure to do so would
falsify the read data if the FPGA tried to raise an IRQ right at that
moment. This wasn't a problem so far, as we didn't actually enable FPGA
IRQs, but that's going to change soon.

Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230422132430.1057490-1-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: emu10k1: remove unused emu->pcm_playback_efx_substream field

Amends historic commit 27ae958cf6 ("emu10k1 driver - add multichannel
device hw:x,3 [2-8/8]").

Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230422132430.1057468-2-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: emu10k1: remove unused `resume` parameter from snd_emu10k1_init()

This was unnecessarily added in commit 09668b441da ("emu10k1 - Add PM
support").

Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230422132430.1057468-1-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: emu10k1: minor optimizations

- In snd_emu10k1_look_for_ctl(), evaluate the cheap condition first
- In _snd_emu10k1_{audigy_,}init_efx(), don't use expensive bit setting
  loops to fill arrays
- In snd_emu_proc_ptr_reg_read(), remove useless condition - iobase can
  be only 0 or 0x20

Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230422121519.1052813-1-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: emu10k1: remove remaining cruft from snd_emu10k1_emu1010_init()

Various redundant FPGA writes which were presumably also cargo-culted
from the Windows driver.

Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230421141006.1005539-7-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: emu10k1: remove apparently pointless EMU_HANA_OPTION_CARDS reads

These seem to be another instance of cargo-culting from the Windows
driver. It presumably queries the register to decide about the followup
actions, but we don't do that.

Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230421141006.1005539-6-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: emu10k1: remove apparently pointless FPGA reads

These seem to be simply cargo-culted from the Windows driver's behavior.
However, the original reason were presumably read-modify-write cycles,
which we don't do.

Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230421141006.1005539-5-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: emu10k1: stop doing weird things with HCFG in snd_emu10k1_emu1010_init()

This doesn't do anything snd_emu10k1_init() wouldn't do later, and none
of the things it does seem relevant for the function itself (which is
pretty much about setting up the FPGA). It was probably a Windows
driver behavior cargo-culting artifact.

Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230421141006.1005539-4-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: emu10k1: fix access to Audigy GPIO port

As the register definition clearly states, this is a 16-bit register,
yet we did all accesses as 32-bit. The writes in particular would have
the potential to clear the TIMER register (depending on how the bus/card
actually handles the too long writes).

This commit also introduces a separate define A_GPIO which aliases
A_IOCFG, which better reflects the distinct usage on E-MU cards.
This is done in the same commit to keep the churn down, as we're
touching all involved lines anyway.

Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230421141006.1005539-2-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: emu10k1: properly assert E-MU FPGA access constaints

Assert the validity of the registers and values, as them being out of
range would indicate an error in the driver. Consequently, don't bother
returning error codes; they were ignored everywhere anyway.

Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230421141006.1005539-1-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: emu10k1: clean up P16V part somewhat

Detach it better from the main PCM driver, which it really doesn't have
much in common with.

In particular, this moves the interrupt handler implementation into
p16v.c, and makes it access the substream runtime status more directly,
so it doesn't need to abuse structs snd_emu10k1_pcm and
snd_emu10k1_voice any more.

We don't need private pcm runtime data at all, as the only thing it was
used for (except the back-link to the substream) was the `running` flag.
So store that directly in runtime->private_data.

This somewhat radical strip-down shows that this driver contains some
complexity that was never actually utilized. I suppose the right way to
fully utilize the hardware in a simple way would be introducing more
substreams. This wouldn't require any of the removed code.

Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230421141006.1005452-7-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: emu10k1: remove unused snd_emu10k1_voice.emu field

It was written, but never read from. Its value is available via the epcm
field.

Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230421141006.1005452-5-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: emu10k1: remove obsolete card type variable and defines

The use of the variable was removed in commit 2b637da5a1b ("clean up
card features"). That commit also broke user space (the ioctl
structure), at which point the defines became meaningless, so I don't
think purging them is a problem.

Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230421141006.1005452-3-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: emu10k1: drop redundant snd_emu10k1_efx_playback_pointer()

It's just an (outdated) copy of snd_emu10k1_playback_pointer().

Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230421141006.1005452-2-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: emu10k1: drop redundant snd_emu10k1_efx_playback_hw_free()

Or actually, replace snd_emu10k1_playback_hw_free() with it, as that is
a subset.

Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230421141006.1005452-1-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: emu10k1: clarify various fx8010.*_mask fields

extin_mask and extout_mask are used only by the SbLive! microcode, so
they have no effect on Audigy.

Eliminate fxbus_mask entirely, as it wasn't actually used for anything.

As a drive-by, remove the pointless pad1 field from struct
snd_emu10k1_fx8010 - it is not visible to user space, so it has no
binary compatibility constraints.

Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230421141006.1005509-1-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: Rate limit usb_set_interface error reporting

When an error occurs during USB disconnection sometimes things can go
wrong as endpoint_set_interface may end up being called repeatedly. For
example:

% dmesg --notime | grep 'usb 3-7.1.4' | sort | uniq -c | head -2
   3069 usb 3-7.1.4: 1:1: usb_set_interface failed (-19)
    908 usb 3-7.1.4: 1:1: usb_set_interface failed (-71)

In my case, there sometimes are hundreds of these usb_set_interface
failure messages a second when I disconnect the hub that has my USB
audio device.

These messages can take a huge amount of the kmsg ringbuffer and don't
provide any extra information over the previous ones, so ratelimit them.

Signed-off-by: Chris Down <chris@chrisdown.name>
Link: https://lore.kernel.org/r/ZEKf8UYBYa1h4JWR@chrisdown.name
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: docs: writing-an-alsa-driver.rst: polishing

- Update some outdated info
- Language fixes
- Whitespace/formatting fixes
- Prefer attached over stand-alone '::'

[ dropped a trailing white space in the patch -- tiwai ]

Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230421112751.990244-1-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ASoC: fsl: imx-audmix: remove dummy dai_link->platform

Dummy dai_link->platform is not needed.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Tested-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/877cu6f619.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: fsl: imx-audmix: cleanup platform which is using Generic DMA

If CPU is using soc-generic-dmaengine-pcm, Platform Component will be
same as CPU Component. In this case, we can use CPU dlc for Platform dlc.
This patch shares CPU dlc with Platform, and add comment.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Tested-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/878remf61j.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: fsl: imx-spdif: cleanup platform which is using Generic DMA

If CPU is using soc-generic-dmaengine-pcm, Platform Component will be
same as CPU Component. In this case, we can use CPU dlc for Platform dlc.
This patch shares CPU dlc with Platform, and add comment.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Tested-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/87a5z2f61w.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: fsl: imx-es8328: cleanup platform which is using Generic DMA

If CPU is using soc-generic-dmaengine-pcm, Platform Component will be
same as CPU Component. In this case, we can use CPU dlc for Platform dlc.
This patch shares CPU dlc with Platform, and add comment.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Tested-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/87bkjif628.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ALSA: pcm: rewrite snd_pcm_playback_silence()

The auto-silencer supports two modes: "thresholded" to fill up "just
enough", and "top-up" to fill up "as much as possible". The two modes
used rather distinct code paths, which this patch unifies. The only
remaining distinction is how much we actually want to fill.

This fixes a bug in thresholded mode, where we failed to use new_hw_ptr,
resulting in under-fill.

Top-up mode is now more well-behaved and much easier to understand in
corner cases.

This also updates comments in the proximity of silencing-related data
structures.

Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230420113324.877164-1-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ASoC: SOF: pcm/Intel: Pause-resume improvements for

Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:

Last minute patch for correct the pasue/resume operation with IPC4.  The
issues are hardto reproduce and needs extended stress testing to be hit,
in which case the audio breaks due to DMA errors.

ASoC: SOF: add no_reply IPC calls

Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:

Simplify IPC messages to avoid passing a reply structure that is not
used later.

ASoC: Intel: boards: updates for 6.4

Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:

Preparation of ALC712 support with different types of SoundWire
devices per link, new RaptorLake SoundWire device, better error
handling for Cirrus devices and cosmetic changes for Max98373.

Bard Liao (3):
  ASoC: Intel: sof_sdw: set codec_num = 1 if the device is not
    aggregated
  ASoC: Intel: sof_sdw: support different devices on the same sdw link
  ASoC: Intel: sof_sdw: append codec type to dai link name

Curtis Malainey (1):
  ASoC: Intel: sof_cirrus_common: Guard against missing buses

Yong Zhi (2):
  ASoC: Intel: sof_sdw: remove late_probe flag in struct
    sof_sdw_codec_info
  ASoC: Intel: sof_sdw_max98373: change sof_sdw_mx8373_late_probe to
    static call

apoorv (1):
  ASoC: Intel: soc-acpi: Add entry for rt711-sdca-sdw at link 2 in RPL
    match table

 sound/soc/intel/boards/sof_cirrus_common.c    |   7 +-
 sound/soc/intel/boards/sof_sdw.c              | 181 ++++++++++++------
 sound/soc/intel/boards/sof_sdw_common.h       |   3 -
 sound/soc/intel/boards/sof_sdw_max98373.c     |  22 +--
 .../intel/common/soc-acpi-intel-rpl-match.c   |  17 +-
 5 files changed, 152 insertions(+), 78 deletions(-)

--
2.37.2

ASoC: cs35l56: Remove duplicate mbox log messages

cs35l56_mbox_send() logs a warning when sending a mbox command fails so
the callers can be simplified.

Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230420102043.1151830-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: es8316: Don't use ranges based register lookup for a single register

The es8316 driver uses a register range to specify the single volatile
register it has. While the cost will be in the noise this is a bunch of
overhead compared to just having a volatile_reg() callback so switch to
the callback.

Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230419-asoc-es8316-volatile-v1-1-2074ec93d8f1@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: Intel: Split the set_power_op for IPC3 and IPC4

Suspending to S0iX with IPC3 requires the PM_GATE IPC to be sent again
to stop the DMA trace. But with IPC4, this is not needed as the trace is
stopped with the LARGE_CONFIG_SET IPC. Also, sending the MOD_D0IX IPC to
set the D0I3 state again when the DSP is in D0I3 already results in an
imbalance in PM runtime states in the firmware. So split the
set_power_state ops for IPC3 and IPC4 to avoid sending the MOD_D0IX IPC
when the DSP is already in D0I3 with IPC4.

Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230420104714.29573-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: pcm: Add an option to skip platform trigger during stop

In the case of IPC4, a pipeline is only paused during STOP/PAUSE/SUSPEND
triggers and the FW keeps the host DMA running when a pipeline is
paused. The start/stop tests iterate through STOP/START triggers without
involving a hw_free. This means that the pipeline state will only toggle
between PAUSED (during the STOP trigger) and RUNNING (during the START
trigger). So this test should be treated in the same way as a
PAUSE_PUSH/PAUSE_RELEASE test and the DMA should be kept running when
toggling the pipeline states between PAUSED and RUNNING.

Since there is no way to tell if a STOP trigger will be followed by hw_free
or not, this patch proposes to always skip DMA stop during the STOP trigger
and handle it later during hw_free. Introduce a new flag in struct
sof_ipc_pcm_ops, delayed_platform_trigger, that will be used to ensure that
the host DMA will not be stopped during the STOP/PAUSE/RELEASE triggers
and set it for IPC4. The platform_trigger call to stop the DMA will be
invoked during PCM hw_free instead when the pipeline is reset.

Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230420114137.27613-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: Intel: hda: Do not stop/start DMA during pause/release

The FW does not pause/stop the host DMA during pause and stopping the
host DMA from the driver could result in an unknown behaviour. So, skip
triggering the HD-Audio host DMA during pause/release.

Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230420114137.27613-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: sof_sdw: append codec type to dai link name

The existing sdw_sof machine driver constructs two SoundWire interfaces
by direction and sdw link id. It means that we will have exactly the
same dai link name if two dai links are on the same sdw link with the
same direction.
The new Realtek codec has two SoundWire interfaces for jack and DMIC
functions and they are treated as different codecs. To create two dai
links for jack and DMIC, we need to have different dai link names.
This patch suggests to append codec type if there are two or more
different types of devices on the same sdw bus.

Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20230419195524.46995-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: sof_sdw: support different devices on the same sdw link

The existing code assumes all devices on the same soundwire link
are the same devices. eg. all rt1316. This commit removes the
assumption and supports different devices on the same soundwire link.

Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20230419195524.46995-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: sof_sdw: set codec_num = 1 if the device is not aggregated

We assume adr_link->num_adr = 1 if a device is not aggregated. However,
the assumption is not valid if there are different type devices on the
same soundwire link.

Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20230419195524.46995-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: sof_sdw_max98373: change sof_sdw_mx8373_late_probe to static call

sof_sdw_mx8373_late_probe is only used in sof_sdw_max98373,
so it should be static and rename it to 'mx8373_sdw_late_probe'.

Signed-off-by: Yong Zhi <yong.zhi@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230419195524.46995-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: sof_sdw: remove late_probe flag in struct sof_sdw_codec_info

Just use codec_card_late_probe ptr in struct sof_sdw_codec_info
for validation check and drop late_probe variable.

Signed-off-by: Yong Zhi <yong.zhi@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230419195524.46995-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: soc-acpi: Add entry for rt711-sdca-sdw at link 2 in RPL match table

RT711 sdca sdw is added with SDW2 link for RPL-P CRB platform.

Signed-off-by: apoorv <apoorv@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230419195524.46995-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: sof_cirrus_common: Guard against missing buses

Even if we find a acpi device we can still be missing the physical node.

Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230419195524.46995-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: Use no_reply calls for TX

Convert all existing calls that pass "NULL, 0" for reply data to the new
no_reply calls. Also convert any calls that pass in data but don't
actually parse the result.

Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20230419194057.42205-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: ipc: Add no reply inline calls

95% of the calls inside SOF to TX an IPC don't care about a reply. Yet
the previous commit cleaned up a bunch of replies that were being
populated and then thrown away. This adds some functions so users who do
not need replies don't feel obligated to provide the space to the API.

Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20230419194057.42205-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ALSA: hda/realtek: fix mute/micmute LEDs for a HP ProBook

There is a HP ProBook 455 G10 which using ALC236 codec and need the
ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF quirk to make mute LED and
micmute LED work.

Signed-off-by: Andy Chi <andy.chi@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230420035942.66817-1-andy.chi@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Merge tag 'asoc-fix-v6.3-rc7' of https://git./linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.3

A few remaining small fixes for v6.3, all small driver specific ones.

ASoC: fsl: Restore configuration of platform

This reverts commit 33683cbf49b54 ("ASoC: fsl: remove unnecessary
dai_link->platform").

dai_link->platform is needed. The platform component is
"snd_dmaengine_pcm", which is registered from cpu driver,

If dai_link->platform is not assigned, then platform
component will not be probed, then there will be issue:

aplay: main:831: audio open error: Invalid argument

Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1681900158-17428-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: fsl: Simplify an error message

dev_err_probe() already display the error code. There is no need to
duplicate it explicitly in the error message.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/c167c16a535049d56f817bbede9c9f6f0a0f4c68.1681626553.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: fsl_asrc_dma: fix potential null-ptr-deref

dma_request_slave_channel() may return NULL which will lead to
NULL pointer dereference error in 'tmp_chan->private'.

Correct this behaviour by, first, switching from deprecated function
dma_request_slave_channel() to dma_request_chan(). Secondly, enable
sanity check for the resuling value of dma_request_chan().
Also, fix description that follows the enacted changes and that
concerns the use of dma_request_slave_channel().

Fixes: 706e2c881158 ("ASoC: fsl_asrc_dma: Reuse the dma channel if available in Back-End")
Co-developed-by: Natalia Petrova <n.petrova@fintech.ru>
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20230417133242.53339-1-n.zhandarovich@fintech.ru
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: fsl_sai: Fix pins setting for i.MX8QM platform

SAI on i.MX8QM platform supports the data lines up to 4. So the pins
setting should be corrected to 4.

Fixes: eba0f0077519 ("ASoC: fsl_sai: Enable combine mode soft")
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Link: https://lore.kernel.org/r/20230418094259.4150771-1-chancel.liu@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ALSA: hda/realtek: Remove specific patch for Dell Precision 3260

Unfortunately, the tester gave a weak feedback (working/non-working) for
this case. After the double confirmation, this change is not really required.
The standard code with alc269_fallback_pin_fixup_tbl should work on this
hardware.

Fixes: 5911d78fabbb ("ALSA: hda/realtek: Improve support for Dell Precision 3260")
Fixes: 5f4efc9dfcfd ("ALSA: hda/realtek: Fix support for Dell Precision 3260")
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230419081121.304846-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: Use of_property_read_bool() for boolean properties

It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property/of_find_property functions for reading properties.
Convert reading boolean properties to to of_property_read_bool().

Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230310144734.1546587-1-robh@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: ppc/tumbler: Use of_property_present() for testing DT property presence

It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property/of_find_property functions for reading properties. As
part of this, convert of_get_property/of_find_property calls to the
recently added of_property_present() helper when we just want to test
for presence of a property and nothing more.

Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230310144733.1546500-1-robh@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ASoC: cs35l56: Updates for B0 silicon

Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:

These patches make some small changes to align with the B0
silicon revision.

ASoC: cs35l56: Rename mixer source defines for SoundWire DP1

Rename the mixer source defines from CS35L56_INPUT_SRC_SWIRE_RXn
to CS35L56_INPUT_SRC_SWIRE_DP1_CHANNELn to match the latest
datasheet.

Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230418144309.1100721-5-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: cs35l56: Remove SDW2RX1 mixer source

The mixer source index value for SDW2RX1 is different between
A1 and B0 silicon. As the driver doesn't provide a DAI for SDW2
just remove it as a mixer source option.

Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230418144309.1100721-4-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: cs35l56: Remove SDW1 TX5 and TX6

Reduce SDW1 to 4 channels and remove the controls for SDW1
TX5 and TX6.

The TX5 and TX6 channels have been removed from B0 silicon.
There is no need to support them on A1 silicon.

Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230418144309.1100721-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: cs35l56: Update comment on masking of EINT20 interrupts

EINT20 contains wake-source interrupts and also interface-blocked
interrupts, which all default to unmasked after reset or wake.

The comment in cs35l56_init() only mentioned the wake interrupts.
Update the comment so it's clear that it's intentional to also
mask the *_BLOCKED interrupts.

Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230418144309.1100721-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: codecs: wcd938x: Simplify with dev_err_probe

Replace dev_err() in probe() path with dev_err_probe() to:
1. Make code a bit simpler and easier to read,
2. Do not print messages on deferred probe.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230418074630.8681-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: codecs: wcd934x: Simplify &pdev->dev in probe

The probe already stores pointer to &pdev->dev, so use it to make the
code a bit easier to read.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230418074630.8681-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: codecs: wcd934x: Simplify with dev_err_probe

Replace dev_err() in probe() path with dev_err_probe() to:
1. Make code a bit simpler and easier to read,
2. Do not print messages on deferred probe.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230418074630.8681-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: dt-bindings: wm8728: Convert to dtschema

Convert the WM8728 audio CODEC bindings to DT schema

Signed-off-by: Saalim Quadri <danascape@gmail.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230417204323.137681-1-danascape@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: nau8825: fix bounds check for adc_delay

clang build reports
sound/soc/codecs/nau8825.c:2826:31: error: overlapping comparisons
  always evaluate to false [-Werror,-Wtautological-overlap-compare]
        if (nau8825->adc_delay < 125 && nau8825->adc_delay > 500)
            ~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~

This is a bug, a logical-or should have been used.

Fixes: fc0b096c9291 ("ASoC: nau8825: Add delay control for input path")
Signed-off-by: Tom Rix <trix@redhat.com>
Acked-by: David Lin <CTLIN0@nuvoton.com>
Link: https://lore.kernel.org/r/20230418120955.3230705-1-trix@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: codecs: wcd9335: Simplify with dev_err_probe

Code can be a bit simpler with dev_err_probe().

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230417141453.919158-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: dt-bindings: wm8737: Convert to dtschema

Convert the WM8737 audio CODEC bindings to DT schema

Signed-off-by: Saalim Quadri <danascape@gmail.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230417212400.161796-1-danascape@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ALSA: hda/hdmi: Remove some dead code

These snd_BUG_ON() can never trigger, so just remove them to save a few
LoC.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/91a31341f32d493bcc6c4515178ce0755ac1aa70.1681710069.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ASoC: cs35l56: Code improvements

Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:

Various code improvements. These remove redundant code and
clean up less-than-optimal original implementations.

ASoC: fsl_mqs: move of_node_put() to the correct location

of_node_put() should have been done directly after
mqs_priv->regmap = syscon_node_to_regmap(gpr_np);
otherwise it creates a reference leak on the success path.

To fix this, of_node_put() is moved to the correct location, and change
all the gotos to direct returns.

Fixes: a9d273671440 ("ASoC: fsl_mqs: Fix error handling in probe")
Signed-off-by: Liliang Ye <yll@hust.edu.cn>
Reviewed-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/r/20230403152647.17638-1-yll@hust.edu.cn
Signed-off-by: Mark Brown <broonie@kernel.org>