dt-bindings: display: rockchip,dw-hdmi: add power-domains property

Most Rockchip hdmi nodes are part of a power domain.
Add a power-domains property and include it to the example
with some reordering to align with the (new) documentation
about property ordering.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/5c45527a-e218-40a3-8e71-a5815417e5f7@gmail.com

dt-bindings: display: rockchip: rockchip,dw-hdmi: remove port property

The hdmi-connector nodes are now functional and the new way to model
hdmi ports nodes with both in and output port subnodes. Unfortunately
with the conversion to YAML the old method with only an input port node
was used. Later the new method was also added to the binding.
A binding must be unambiguously, so remove the old port property
entirely and make port@0 and port@1 a requirement as all
upstream dts files are updated as well and because checking
deprecated stuff is a bit pointless.
Update the example to avoid use of the removed property.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/a493c65e-7cf9-455f-95d5-8c98cad35710@gmail.com

drm/panel: st7703: Add Panel Rotation Support

Add support for panel rotation to ST7703 based devices.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240212184950.52210-5-macroalpha82@gmail.com

dt-bindings: display: rocktech,jh057n00900: Document panel rotation

Document the rotation property for rocktech,jh057n00900 panels.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240212184950.52210-4-macroalpha82@gmail.com

drm/panel: st7703: Add Powkiddy RGB10MAX3 Panel Support

The Powkiddy RGB10MAX3 is a handheld device with a 5 inch 720x1280
display panel with a Sitronix ST7703 display controller. The panel
is installed rotated 270 degrees.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240212184950.52210-3-macroalpha82@gmail.com

dt-bindings: display: Add Powkiddy RGB10MAX3 panel

The RGB10MAX3 panel is a panel specific to the Powkiddy RGB10MAX3
handheld device that measures 5 inches diagonally with a resolution
of 720x1280.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240212184950.52210-2-macroalpha82@gmail.com

gpu: host1x: bus: make host1x_bus_type const

Since commit d492cc2573a0 ("driver core: device.h: make struct
bus_type a const *"), the driver core can properly handle constant
struct bus_type, move the host1x_bus_type variable to be a constant
structure as well, placing it into read-only memory which can not be
modified at runtime.

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240213-bus_cleanup-host1x-v1-1-54ec51b5d14f@marliere.net

drm/xe: fix arguments to drm_err_printer()

The commit below changed drm_err_printer() arguments, but failed to
update all places.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/r/20240213120410.75c45763@canb.auug.org.au
Fixes: 5e0c04c8c40b ("drm/print: make drm_err_printer() device specific by using drm_err()")
Cc: Luca Coelho <luciano.coelho@intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240213084954.878643-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/xe: Fix a missing argument to drm_err_printer

The indicated commit below added a device argument to the
function, but there was a call in the xe driver that was
not properly changed.

Fixes: 5e0c04c8c40b ("drm/print: make drm_err_printer() device specific by using drm_err()")
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Luca Coelho <luciano.coelho@intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240212103833.138263-1-thomas.hellstrom@linux.intel.com

drm/tests: mm: Convert to drm_dbg_printer

Fix one of the tests in drm_mm that was not converted prior to
drm_debug_printer removal, causing tests build failure.

Fixes: e154c4fc7bf2 ("drm: remove drm_debug_printer in favor of drm_dbg_printer")
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240209140818.106685-1-michal.winiarski@intel.com

drm/lima: standardize debug messages by ip name

Some debug messages carried the ip name, or included "lima", or
included both the ip name and then the numbered ip name again.
Make the messages more consistent by always looking up and showing
the ip name first.

Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240124025947.2110659-9-nunes.erico@gmail.com

drm/lima: increase default job timeout to 10s

The previous 500ms default timeout was fairly optimistic and could be
hit by real world applications. Many distributions targeting devices
with a Mali-4xx already bumped this timeout to a higher limit.
We can be generous here with a high value as 10s since this should
mostly catch buggy jobs like infinite loop shaders, and these don't
seem to happen very often in real applications.

Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240124025947.2110659-8-nunes.erico@gmail.com

drm/lima: remove guilty drm_sched context handling

Marking the context as guilty currently only makes the application which
hits a single timeout problem to stop its rendering context entirely.
All jobs submitted later are dropped from the guilty context.

Lima runs on fairly underpowered hardware for modern standards and it is
not entirely unreasonable that a rendering job may time out occasionally
due to high system load or too demanding application stack. In this case
it would be generally preferred to report the error but try to keep the
application going.

Other similar embedded GPU drivers don't make use of the guilty context
flag. Now that there are reliability improvements to the lima timeout
recovery handling, drop the guilty contexts to let the application keep
running in this case.

Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240124025947.2110659-7-nunes.erico@gmail.com

drm/lima: handle spurious timeouts due to high irq latency

There are several unexplained and unreproduced cases of rendering
timeouts with lima, for which one theory is high IRQ latency coming from
somewhere else in the system.
This kind of occurrence may cause applications to trigger unnecessary
resets of the GPU or even applications to hang if it hits an issue in
the recovery path.
Panfrost already does some special handling to account for such
"spurious timeouts", it makes sense to have this in lima too to reduce
the chance that it hit users.

Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240124025947.2110659-6-nunes.erico@gmail.com

drm/lima: set gp bus_stop bit before hard reset

This is required for reliable hard resets. Otherwise, doing a hard reset
while a task is still running (such as a task which is being stopped by
the drm_sched timeout handler) may result in random mmu write timeouts
or lockups which cause the entire gpu to hang.

Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240124025947.2110659-5-nunes.erico@gmail.com

drm/lima: set pp bus_stop bit before hard reset

This is required for reliable hard resets. Otherwise, doing a hard reset
while a task is still running (such as a task which is being stopped by
the drm_sched timeout handler) may result in random mmu write timeouts
or lockups which cause the entire gpu to hang.

Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240124025947.2110659-4-nunes.erico@gmail.com

drm/lima: reset async_reset on gp hard reset

Lima gp jobs use an async reset to avoid having to wait for the soft
reset right after a job. The soft reset is done at the end of a job and
a reset_complete flag is expected to be set at the next job.
However, in case the user runs into a job timeout from any application,
a hard reset is issued to the hardware. This hard reset clears the
reset_complete flag, which causes an error message to show up before the
next job.
This is probably harmless for the execution but can be very confusing to
debug, as it blames a reset timeout on the next application to submit a
job.
Reset the async_reset flag when doing the hard reset so that we don't
get that message.

Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240124025947.2110659-3-nunes.erico@gmail.com

drm/lima: reset async_reset on pp hard reset

Lima pp jobs use an async reset to avoid having to wait for the soft
reset right after a job. The soft reset is done at the end of a job and
a reset_complete flag is expected to be set at the next job.
However, in case the user runs into a job timeout from any application,
a hard reset is issued to the hardware. This hard reset clears the
reset_complete flag, which causes an error message to show up before the
next job.
This is probably harmless for the execution but can be very confusing to
debug, as it blames a reset timeout on the next application to submit a
job.
Reset the async_reset flag when doing the hard reset so that we don't
get that message.

Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240124025947.2110659-2-nunes.erico@gmail.com

drivers/ps3: select VIDEO to provide cmdline functions

When VIDEO is not set, there is a build error. Fix that by selecting
VIDEO for PS3_PS3AV.

ERROR: modpost: ".video_get_options" [drivers/ps3/ps3av_mod.ko] undefined!

Fixes: dae7fbf43fd0 ("driver/ps3: Include <video/cmdline.h> for mode parsing")
Fixes: a3b6792e990d ("video/cmdline: Introduce CONFIG_VIDEO for video= parameter")
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Aneesh Kumar K.V <aneesh.kumar@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Geoff Levand <geoff@infradead.org>
Acked-by: Geoff Levand <geoff@infradead.org>
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240207161322.8073-1-rdunlap@infradead.org

drm: remove drm_debug_printer in favor of drm_dbg_printer

Convert the remaining drm_debug_printer users over to drm_dbg_printer,
as it can handle the cases without struct drm_device pointer, and also
provides drm debug category and prefix support. Remove drm_debug_printer
altogether.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/18b5b91e62d071675a651f6f91c58f05ad74134a.1705410327.git.jani.nikula@intel.com

drm/xe: switch from drm_debug_printer() to device specific drm_dbg_printer()

Prefer the device specific debug printer.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/35929b030f7ba67cd32808d42e916aa9cfb5709d.1705410327.git.jani.nikula@intel.com

drm/i915: use drm_printf() with the drm_err_printer intead of pr_err()

There's already a related drm_printer. Use it to preserve the context
instead of a separate pr_err().

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/246c0c275d05c919d959983e1784e3f7347f4540.1705410327.git.jani.nikula@intel.com

drm/i915: switch from drm_debug_printer() to device specific drm_dbg_printer()

Prefer the device specific debug printer.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/f2614dfcba295be20c650cdab24c3979d265f422.1705410327.git.jani.nikula@intel.com

drm/dp: switch drm_dp_vsc_sdp_log() to struct drm_printer

Use the existing drm printer infrastructure instead of local macros.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/cdf8faf272d345de215feb6ececba384ecaecdb4.1705410327.git.jani.nikula@intel.com

drm/mode: switch from drm_debug_printer() to device specific drm_dbg_printer()

Prefer the device specific debug printer.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/56f6f3e8e045206706d7a292968b6b2f4fc19c27.1705410327.git.jani.nikula@intel.com

drm/dp_mst: switch from drm_debug_printer() to device specific drm_dbg_printer()

Prefer the device specific debug printer.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/50d510a6e13735cef10325742bf49b7f6955b970.1705410327.git.jani.nikula@intel.com

drm/print: add drm_dbg_printer() for drm device specific printer

We've lacked a device specific debug printer. Add one. Take category
into account too.

__builtin_return_address(0) is inaccurate here, so don't use it. If
necessary, we can later pass __func__ to drm_dbg_printer() by wrapping
it inside a macro.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/48607d58e5cdf8341ffdd522257542fa2ce41a19.1705410327.git.jani.nikula@intel.com

drm/print: move enum drm_debug_category etc. earlier in drm_print.h

Avoid forward declarations in subsequent changes, but separate this
movement to an independent change.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/9d105014e3c90af13a874745d768212347f68283.1705410327.git.jani.nikula@intel.com

drm/print: make drm_err_printer() device specific by using drm_err()

With few users for drm_err_printer(), it's still feasible to convert it
to be device specific. Use drm_err() under the hood.

While at it, make the prefix optional.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/2a9cdcfc1df44568078f7c131e2e7e0f7c94e97e.1705410327.git.jani.nikula@intel.com

drm/bridge: remove ->get_edid callback

There are no more users of the ->get_edid callback left. They've all
been converted to ->edid_read. Remove the callback, and the fallback in
drm_bridge_edid_read().

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/34407a355ec6848fc44f8c30d245fcbc5687195e.1706038510.git.jani.nikula@intel.com

drm/bridge: ti-sn65dsi86: switch to ->edid_read callback

Prefer using the struct drm_edid based callback and functions.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/9e54fb12c950486fb1b928b57da7bace8458ca2c.1706038510.git.jani.nikula@intel.com

drm/bridge: tc358767: switch to ->edid_read callback

Prefer using the struct drm_edid based callback and functions.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/978100cf8915b580ce66d34d27ed48858d9c161a.1706038510.git.jani.nikula@intel.com

drm/bridge: tc358767: update the EDID property

The EDID property should be updated between reading the EDID and adding
the modes.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/95dc1f219d8cb31e4ff30ce1f516e6f4b5e06802.1706038510.git.jani.nikula@intel.com

drm: bridge: dw_hdmi: clear the EDID property and CEC address on failures

If EDID read fails, clear the EDID property and CEC address.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/a417ae48da6cc0dc8a9e3d929ce0c91f1e4905f1.1706038510.git.jani.nikula@intel.com

drm: bridge: dw_hdmi: switch to ->edid_read callback

Prefer using the struct drm_edid based callback and functions.

v2: Fix -Wuninitialized (kernel test robot)

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/400bfdeca4fd25b7624286e5969c4b0b1331c2b4.1706038510.git.jani.nikula@intel.com

drm: adv7511: switch to ->edid_read callback

Prefer using the struct drm_edid based callback and functions.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/d38a3ad5dc964c11967219e41efe02297514f1c2.1706038510.git.jani.nikula@intel.com

drm: xlnx: zynqmp_dpsub: switch to ->edid_read callback

Prefer using the struct drm_edid based callback and functions.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/549694273b57e7275de01daf8ce60579121998d4.1706038510.git.jani.nikula@intel.com

drm/omap/hdmi5: switch to ->edid_read callback

Prefer using the struct drm_edid based callback and functions.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/da96653c111a7f989c7c804923968fa5f47c6b5a.1706038510.git.jani.nikula@intel.com

drm/omap/hdmi4: switch to ->edid_read callback

Prefer using the struct drm_edid based callback and functions.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/4c9b24a399e8f305698f8fe5ebd687bfd6ce2e59.1706038510.git.jani.nikula@intel.com

drm/msm/hdmi: switch to ->edid_read callback

Prefer using the struct drm_edid based callback and functions.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/2f127a42e3a9472f5a7c6bcbc8a42433e94acb3f.1706038510.git.jani.nikula@intel.com

drm/msm/hdmi: fix indent

Remove the excess leading tabs.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/d06f990311ba0108357512c46b3e8328bacedcd0.1706038510.git.jani.nikula@intel.com

drm/mediatek/hdmi: switch to ->edid_read callback

Prefer using the struct drm_edid based callback and functions.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/7fff7a6ff6b7e6f121eafaccfc4c368e492631f4.1706038510.git.jani.nikula@intel.com

drm/mediatek/dp: switch to ->edid_read callback

Prefer using the struct drm_edid based callback and functions.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/3d783478e25e71f12f66c2caedb1f9205d4d8a44.1706038510.git.jani.nikula@intel.com

drm/bridge: sii902x: switch to ->edid_read callback

Prefer using the struct drm_edid based callback and functions.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/684ccb5445bfc448dfaff00ad61a16a76f6aa723.1706038510.git.jani.nikula@intel.com

drm/bridge: sii902x: use display info is_hdmi

Use the pre-parsed information instead of parsing EDID again.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/9350875730b332ab2cac58fcbe7f4812fab567b8.1706038510.git.jani.nikula@intel.com

drm/bridge: nxp-ptn3460: switch to ->edid_read callback

Prefer using the struct drm_edid based callback and functions.

v2: Fix -Wsometimes-uninitialized (kernel test robot)

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/6f4e48af3bf4d7782e8dfad703b6f22a69e94bf8.1706038510.git.jani.nikula@intel.com

drm/bridge: megachips: switch to ->edid_read callback

Prefer using the struct drm_edid based callback and functions.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/f1e3fa51de1625f9f361b7cdb81fd74d51fb9dba.1706038510.git.jani.nikula@intel.com

drm/bridge: lt9611uxc: switch to ->edid_read callback

Prefer using the struct drm_edid based callback and functions.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/40fc5eaf2fa34a9d604fe5291ae2a41623dd391d.1706038510.git.jani.nikula@intel.com

drm/bridge: lt9611: switch to ->edid_read callback

Prefer using the struct drm_edid based callback and functions.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/0c43e5cc9f0b320abd742e7efba5af7a20d8ebd9.1706038510.git.jani.nikula@intel.com

drm: bridge: it66121: switch to ->edid_read callback

Prefer using the struct drm_edid based callback and functions.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/b7b0d7957b75297a4768e9df61f21e21170b2bf2.1706038510.git.jani.nikula@intel.com

drm/bridge: it6505: switch to ->edid_read callback

Prefer using the struct drm_edid based callback and functions.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/5d2579802e277cc562bde6c4e26a5b63ff0e02ae.1706038510.git.jani.nikula@intel.com

drm/bridge: display-connector: switch to ->edid_read callback

Prefer using the struct drm_edid based callback and functions.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/4e59a181e71e20158106868d1a6f7165cd9193e3.1706038510.git.jani.nikula@intel.com

drm/bridge: cdns-mhdp8546: clear the EDID property on failures

If EDID read fails, clear the EDID property.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/a754d9f90fe2addb9d90f9638e3d53dce87bdabc.1706038510.git.jani.nikula@intel.com

drm/bridge: cdns-mhdp8546: switch to ->edid_read callback

Prefer using the struct drm_edid based callback and functions.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/88fde35b8d75860d7a2caad94d774aa96b443754.1706038510.git.jani.nikula@intel.com

drm/bridge: anx7625: switch to ->edid_read callback

Prefer using the struct drm_edid based callback.

v2: Fix build (goto out;)

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/62b905f4ec9fe3efa3785d34006b7e45e4c6c88b.1706038510.git.jani.nikula@intel.com

drm/bridge: remove drm_bridge_get_edid() in favour of drm_bridge_edid_read()

All users of drm_bridge_get_edid() have been converted to use
drm_bridge_edid_read(). Remove drm_bridge_get_edid().

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/c51d50edddbe8816eaa63e6ccafa9f2354b506ba.1706038510.git.jani.nikula@intel.com

drm/meson: switch to drm_bridge_edid_read()

Prefer using the struct drm_edid based functions.

Not ideal, should use source physical address from connector info.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/0a6556b4abaa341b5a3b9b466dbb23714369f7e1.1706038510.git.jani.nikula@intel.com

drm/bridge: tfp410: clear the EDID property on failures

If EDID read fails, clear the EDID property.

Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Robert Foss <rfoss@kernel.org>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/f49d95ce21e85495d73384acd184f4f9778368ee.1706038510.git.jani.nikula@intel.com

drm/bridge: tfp410: use drm_bridge_edid_read()

Prefer using the struct drm_edid based functions.

Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Robert Foss <rfoss@kernel.org>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/f857bb36a78c57dc6a07b7b6cc90312fc3139ca8.1706038510.git.jani.nikula@intel.com

drm: bridge: simple-bridge: clear the EDID property on failures

If EDID read fails, clear the EDID property.

Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Robert Foss <rfoss@kernel.org>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/3e3c9505fa6859a96ead70121791fd9c4d946b6f.1706038510.git.jani.nikula@intel.com

drm: bridge: simple-bridge: use drm_bridge_edid_read()

Prefer using the struct drm_edid based functions.

Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Robert Foss <rfoss@kernel.org>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/ae1fd3d94829e3e5c197ca58eb18108cb004cf0b.1706038510.git.jani.nikula@intel.com

drm/bridge: lt9611uxc: use drm_bridge_edid_read()

Prefer using the struct drm_edid based functions.

Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Robert Foss <rfoss@kernel.org>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/b784ed15b792bb87f8c40b90c5c42591d7878643.1706038510.git.jani.nikula@intel.com

drm/bridge: lt8912b: use ->edid_read callback

Prefer using the struct drm_edid based functions.

Cc: Adrien Grassein <adrien.grassein@gmail.com>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Robert Foss <rfoss@kernel.org>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/98f0356f1bd279bc337c904d8313c9afee530b48.1706038510.git.jani.nikula@intel.com

drm/bridge: lt8912b: clear the EDID property on failures

If EDID read fails, clear the EDID property.

Cc: Adrien Grassein <adrien.grassein@gmail.com>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Robert Foss <rfoss@kernel.org>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/2080adaadf4bba3d85f58c42c065caf9aad9a4ef.1706038510.git.jani.nikula@intel.com

drm/bridge: lt8912b: use drm_bridge_edid_read()

Prefer using the struct drm_edid based functions.

cc: Adrien Grassein <adrien.grassein@gmail.com>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Robert Foss <rfoss@kernel.org>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/32c9b52fe6fa7cbad6bfd0ff00041876977e02ea.1706038510.git.jani.nikula@intel.com

drm/bridge: chrontel-ch7033: switch to drm_bridge_edid_read()

Prefer using the struct drm_edid based functions.

Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Robert Foss <rfoss@kernel.org>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/51691a606671d46696c0f1ab9492e6a1b691457b.1706038510.git.jani.nikula@intel.com

drm/bridge: switch to drm_bridge_edid_read()

Prefer using the struct drm_edid based functions.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/704941568475e6e0e40d99a595a67e887949a30f.1706038510.git.jani.nikula@intel.com

drm/bridge: add ->edid_read hook and drm_bridge_edid_read()

Add new struct drm_edid based ->edid_read hook and
drm_bridge_edid_read() function to call the hook.

v2: Include drm/drm_edid.h

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/9d08d22eaffcb9c59a2b677e45d7e61fc689bc2f.1706038510.git.jani.nikula@intel.com

drm: xlnx: zynqmp_dpsub: Filter interrupts against mask

Filter out status register against the interrupts' mask.

Some events are being reported via DP status register, even if
corresponding interrupts have been disabled. One instance of such event
leads to generation of VBLANK when the driver is in DRM bridge mode,
which in turn results in NULL pointer dereferencing. We should avoid
processing such events in an interrupt handler context.

This problem is less noticeable when the driver operates in DMA mode, as
in this case we have DRM CRTC object instantiated and DRM framework
simply discards unwanted VBLANKs in drm_handle_vblank().

Signed-off-by: Anatoliy Klymenko <anatoliy.klymenko@amd.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240124025402.373620-5-anatoliy.klymenko@amd.com

drm: xlnx: zynqmp_dpsub: Clear status register ASAP

Clear status register as soon as we read it.

Addressing comments from
https://lore.kernel.org/dri-devel/beb551c7-bb7e-4cd0-b166-e9aad90c4620@ideasonboard.com/

Signed-off-by: Anatoliy Klymenko <anatoliy.klymenko@amd.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240124025402.373620-4-anatoliy.klymenko@amd.com

drm: xlnx: zynqmp_dpsub: Fix timing for live mode

Expect external video timing in live video input mode, program
DPSUB acordingly.

Signed-off-by: Anatoliy Klymenko <anatoliy.klymenko@amd.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240124025402.373620-3-anatoliy.klymenko@amd.com

drm: xlnx: zynqmp_dpsub: Make drm bridge discoverable

ZynqMP DPSUB supports 2 input modes: DMA based and live video.

In the first mode, the driver implements CRTC and DP encoder DRM bridge
to model the complete display pipeline. In this case, DRM bridge is
being directly instantiated within the driver, not using any bridge
discovery mechanisms.

In the live video input mode video signal is generated by FPGA fabric
and passed into DPSUB over the connected bus. In this mode driver
exposes the DP encoder as a DRM bridge, expecting external CRTC to
discover it via drm_of_find_panel_or_bridge() or a similar call. This
discovery relies on drm_bridge.of_node being properly set.

Assign device OF node to the bridge prior to registering it. This will
make said bridge discoverable by an external CRTC driver.

Signed-off-by: Anatoliy Klymenko <anatoliy.klymenko@amd.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240124025402.373620-2-anatoliy.klymenko@amd.com

Merge drm/drm-next into drm-misc-next

Backmerging to update drm-misc-next to the state of v6.8-rc3. Also
fixes a build problem with xe.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

drm: mipi-dsi: make mipi_dsi_bus_type const

Now that the driver core can properly handle constant struct bus_type,
move the mipi_dsi_bus_type variable to be a constant structure as well,
placing it into read-only memory which can not be modified at runtime.

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240203-bus_cleanup-gpu-v1-2-1b6ecdb5f941@marliere.net
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240203-bus_cleanup-gpu-v1-2-1b6ecdb5f941@marliere.net

drm: display: make dp_aux_bus_type const

Now that the driver core can properly handle constant struct bus_type,
move the dp_aux_bus_type variable to be a constant structure as well,
placing it into read-only memory which can not be modified at runtime.

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240203-bus_cleanup-gpu-v1-1-1b6ecdb5f941@marliere.net
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240203-bus_cleanup-gpu-v1-1-1b6ecdb5f941@marliere.net

drm/bridge: imx8mp-hdmi-pvi: Fix build warnings

Two separate build warnings were reported.  One from an
uninitialized variable, and the other from returning 0
instead of NULL from a pointer.

Fixes: 059c53e877ca ("drm/bridge: imx: add driver for HDMI TX Parallel Video Interface")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202402062134.a6CqAt3s-lkp@intel.com/
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240207002305.618499-1-aford173@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240207002305.618499-1-aford173@gmail.com

drm/panel: re-alphabetize the menu list

A few of the DRM_PANEL entries have become out of alphabetical order,
so move them around a bit to restore alpha order.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Jessica Zhang <quic_jesszhan@quicinc.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: <dri-devel@lists.freedesktop.org>
Cc: Aradhya Bhatia <a-bhatia1@ti.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240205062711.3513-1-rdunlap@infradead.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240205062711.3513-1-rdunlap@infradead.org

drm/panel: simple: push blanking limit on RK32FN48H

Push horizontal front porch and vertical back porch blanking limit.
This allows to get a 60 fps sharp.

Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240205-ltdc_mp13-v1-5-116d43ebba75@foss.st.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240205-ltdc_mp13-v1-5-116d43ebba75@foss.st.com

drm/panel: simple: fix flags on RK043FN48H

DISPLAY_FLAGS_SYNC_POSEDGE is missing in the flags on the default
timings. When overriding the default mode with one described in the
device tree, the mode does not get acked because of this missing flag.
Moreover since the panel is driven by the positive edge it makes sense
to add it here.

Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Link: https://lore.kernel.org/r/20240205-ltdc_mp13-v1-4-072d24bf1b36@foss.st.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240205-ltdc_mp13-v1-4-072d24bf1b36@foss.st.com

drm/bridge: imx: add bridge wrapper driver for i.MX8MP DWC HDMI

Add a simple wrapper driver for the DWC HDMI bridge driver that
implements the few bits that are necessary to abstract the i.MX8MP
SoC integration.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Marek Vasut <marex@denx.de>
Tested-by: Adam Ford <aford173@gmail.com> #imx8mp-beacon
Tested-by: Richard Leitner <richard.leitner@skidata.com>
Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Adam Ford <aford173@gmail.com>
Link: https://lore.kernel.org/r/20240203165307.7806-11-aford173@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240203165307.7806-11-aford173@gmail.com

dt-bindings: display: imx: add binding for i.MX8MP HDMI TX

The HDMI TX controller on the i.MX8MP SoC is a Synopsys designware IP
core with a little bit of SoC integration around it.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20240203165307.7806-10-aford173@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240203165307.7806-10-aford173@gmail.com

drm/sched: Add Matthew Brost to maintainers

Add Matthew Brost to DRM scheduler maintainers.

Cc: Luben Tuikov <ltuikov89@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240131030302.2088173-1-matthew.brost@intel.com
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Luben Tuikov <ltuikov89@gmail.com>
Signed-off-by: Luben Tuikov <ltuikov89@gmail.com>

dt-bindings: drm/bridge: ti-sn65dsi86: Fix bouncing @codeaurora address

The servers for the @codeaurora domain are long retired and any messages
sent there bounce.  Sandeep Panda's email address is no longer valid and
should be repleaced.  However Sandeep has left the company and has not
been active sice, therefore it looks like this binding is orphaned.

Doug is listed as the reviewer for this file in MAINTAINERS and has
volunteered to be listed within the file as the binding maintainer.
Therefore replace Sandeep with Doug to make the documentation current.

Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240202202329.4172917-1-quic_jhugo@quicinc.com

drm/bridge: imx: add driver for HDMI TX Parallel Video Interface

This IP block is found in the HDMI subsystem of the i.MX8MP SoC. It has a
full timing generator and can switch between different video sources. On
the i.MX8MP however the only supported source is the LCDIF. The block
just needs to be powered up and told about the polarity of the video
sync signals to act in bypass mode.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Tested-by: Marek Vasut <marex@denx.de>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Tested-by: Richard Leitner <richard.leitner@skidata.com>
Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Tested-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Adam Ford <aford173@gmail.com>
Link: https://lore.kernel.org/r/20240203165307.7806-9-aford173@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240203165307.7806-9-aford173@gmail.com

dt-bindings: display: imx: add binding for i.MX8MP HDMI PVI

Add binding for the i.MX8MP HDMI parallel video interface block.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Adam Ford <aford173@gmail.com>
Link: https://lore.kernel.org/r/20240203165307.7806-8-aford173@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240203165307.7806-8-aford173@gmail.com

drm/panel: visionox-r66451: Set prepare_prev_first flag

The DSI host needs to be enabled for the panel to be initialized in
prepare(). Ensure this happens by setting prepare_prev_first.

Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240202-visionox-r66451-prev-first-v1-1-c267dc889284@quicinc.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240202-visionox-r66451-prev-first-v1-1-c267dc889284@quicinc.com

drm/rect: fix kernel-doc typos

Correct typos of "translated".

Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patchwork.freedesktop.org/patch/msgid/20240205054101.27929-1-rdunlap@infradead.org

Merge tag 'drm-misc-next-2024-01-11' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for v6.9:

UAPI Changes:

virtio:
- add Venus capset defines

Cross-subsystem Changes:

Core Changes:

- fix drm_fixp2int_ceil()
- documentation fixes
- clean ups
- allow DRM_MM_DEBUG with DRM=m
- build fixes for debugfs support
- EDID cleanups
- sched: error-handling fixes
- ttm: add tests

Driver Changes:

bridge:
- ite-6505: fix DP link-training bug
- samsung-dsim: fix error checking in probe
- tc358767: fix regmap usage

efifb:
- use copy of global screen_info state

hisilicon:
- fix EDID includes

mgag200:
- improve ioremap usage
- convert to struct drm_edid

nouveau:
- disp: use kmemdup()
- fix EDID includes
- documentation fixes

panel:
- ltk050h3146w: error-handling fixes
- panel-edp: support delay between power-on and enable; use put_sync in
  unprepare; support Mediatek MT8173 Chromebooks, BOE NV116WHM-N49 V8.0,
  BOE NV122WUM-N41, CSO MNC207QS1-1 plus DT bindings
- panel-lvds: support EDT ETML0700Z9NDHA plus DT bindings
- panel-novatek: FRIDA FRD400B25025-A-CTK plus DT bindings

qaic:
- fixes to BO handling
- make use of DRM managed release
- fix order of remove operations

rockchip:
- analogix_dp: get encoder port from DT
- inno_hdmi: support HDMI for RK3128
- lvds: error-handling fixes

simplefb:
- fix logging

ssd130x:
- support SSD133x plus DT bindings

tegra:
- fix error handling

tilcdc:
- make use of DRM managed release

v3d:
- show memory stats in debugfs

vc4:
- fix error handling in plane prepare_fb
- fix framebuffer test in plane helpers

vesafb:
- use copy of global screen_info state

virtio:
- cleanups

vkms:
- fix OOB access when programming the LUT
- Kconfig improvements

vmwgfx:
- unmap surface before changing plane state
- fix memory leak in error handling
- documentation fixes

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240111154902.GA8448@linux-uq9g

Linux 6.8-rc3

Merge tag 'for-linus-6.8-rc3' of git://git./linux/kernel/git/tytso/ext4

Pull ext4 fixes from Ted Ts'o:
 "Miscellaneous bug fixes and cleanups in ext4's multi-block allocator
  and extent handling code"

* tag 'for-linus-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (23 commits)
  ext4: make ext4_set_iomap() recognize IOMAP_DELALLOC map type
  ext4: make ext4_map_blocks() distinguish delalloc only extent
  ext4: add a hole extent entry in cache after punch
  ext4: correct the hole length returned by ext4_map_blocks()
  ext4: convert to exclusive lock while inserting delalloc extents
  ext4: refactor ext4_da_map_blocks()
  ext4: remove 'needed' in trace_ext4_discard_preallocations
  ext4: remove unnecessary parameter "needed" in ext4_discard_preallocations
  ext4: remove unused return value of ext4_mb_release_group_pa
  ext4: remove unused return value of ext4_mb_release_inode_pa
  ext4: remove unused return value of ext4_mb_release
  ext4: remove unused ext4_allocation_context::ac_groups_considered
  ext4: remove unneeded return value of ext4_mb_release_context
  ext4: remove unused parameter ngroup in ext4_mb_choose_next_group_*()
  ext4: remove unused return value of __mb_check_buddy
  ext4: mark the group block bitmap as corrupted before reporting an error
  ext4: avoid allocating blocks from corrupted group in ext4_mb_find_by_goal()
  ext4: avoid allocating blocks from corrupted group in ext4_mb_try_best_found()
  ext4: avoid dividing by 0 in mb_update_avg_fragment_size() when block bitmap corrupt
  ext4: avoid bb_free and bb_fragments inconsistency in mb_free_blocks()
  ...

Merge tag 'v6.8-rc3-smb-client-fixes' of git://git.samba.org/sfrench/cifs-2.6

Pull smb client fixes from Steve French:
 "Five smb3 client fixes, mostly multichannel related:

   - four multichannel fixes including fix for channel allocation when
     multiple inactive channels, fix for unneeded race in channel
     deallocation, correct redundant channel scaling, and redundant
     multichannel disabling scenarios

   - add warning if max compound requests reached"

* tag 'v6.8-rc3-smb-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  smb: client: increase number of PDUs allowed in a compound request
  cifs: failure to add channel on iface should bump up weight
  cifs: do not search for channel if server is terminating
  cifs: avoid redundant calls to disable multichannel
  cifs: make sure that channel scaling is done only once

Merge tag 'xfs-6.8-fixes-2' of git://git./fs/xfs/xfs-linux

Pull xfs fixes from Chandan Babu:

 - Clear XFS_ATTR_INCOMPLETE filter on removing xattr from a node format
   attribute fork

 - Remove conditional compilation of realtime geometry validator
   functions to prevent confusing error messages from being printed on
   the console during the mount operation

* tag 'xfs-6.8-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: remove conditional building of rt geometry validator functions
  xfs: reset XFS_ATTR_INCOMPLETE filter on node removal

Merge tag 'char-misc-6.8-rc3' of git://git./linux/kernel/git/gregkh/char-misc

Pull char/misc driver fixes from Greg KH:
 "Here are three tiny driver fixes for 6.8-rc3.  They include:

   - Android binder long-term bug with epoll finally being fixed

   - fastrpc driver shutdown bugfix

   - open-dice lockdep fix

  All of these have been in linux-next this week with no reported
  issues"

* tag 'char-misc-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  binder: signal epoll threads of self-work
  misc: open-dice: Fix spurious lockdep warning
  misc: fastrpc: Mark all sessions as invalid in cb_remove

Merge tag 'tty-6.8-rc3' of git://git./linux/kernel/git/gregkh/tty

Pull tty and serial driver fixes from Greg KH:
 "Here are some small tty and serial driver fixes for 6.8-rc3 that
  resolve a number of reported issues. Included in here are:

   - rs485 flag definition fix that affected the user/kernel abi in -rc1

   - max310x driver fixes

   - 8250_pci1xxxx driver off-by-one fix

   - uart_tiocmget locking race fix

  All of these have been in linux-next for over a week with no reported
  issues"

* tag 'tty-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  serial: max310x: prevent infinite while() loop in port startup
  serial: max310x: fail probe if clock crystal is unstable
  serial: max310x: improve crystal stable clock detection
  serial: max310x: set default value when reading clock ready bit
  serial: core: Fix atomicity violation in uart_tiocmget
  serial: 8250_pci1xxxx: fix off by one in pci1xxxx_process_read_data()
  tty: serial: Fix bit order in RS485 flag definitions

Merge tag 'usb-6.8-rc3' of git://git./linux/kernel/git/gregkh/usb

Pull USB driver fixes from Greg KH:
 "Here are a bunch of small USB driver fixes for 6.8-rc3. Included in
  here are:

   - new usb-serial driver ids

   - new dwc3 driver id added

   - typec driver change revert

   - ncm gadget driver endian bugfix

   - xhci bugfixes for a number of reported issues

   - usb hub bugfix for alternate settings

   - ulpi driver debugfs memory leak fix

   - chipidea driver bugfix

   - usb gadget driver fixes

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (24 commits)
  USB: serial: option: add Fibocom FM101-GL variant
  USB: serial: qcserial: add new usb-id for Dell Wireless DW5826e
  USB: serial: cp210x: add ID for IMST iM871A-USB
  usb: typec: tcpm: fix the PD disabled case
  usb: ucsi_acpi: Quirk to ack a connector change ack cmd
  usb: ucsi_acpi: Fix command completion handling
  usb: ucsi: Add missing ppm_lock
  usb: ulpi: Fix debugfs directory leak
  Revert "usb: typec: tcpm: fix cc role at port reset"
  usb: gadget: pch_udc: fix an Excess kernel-doc warning
  usb: f_mass_storage: forbid async queue when shutdown happen
  USB: hub: check for alternate port before enabling A_ALT_HNP_SUPPORT
  usb: chipidea: core: handle power lost in workqueue
  usb: dwc3: gadget: Fix NULL pointer dereference in dwc3_gadget_suspend
  usb: dwc3: pci: add support for the Intel Arrow Lake-H
  usb: core: Prevent null pointer dereference in update_port_device_state
  xhci: handle isoc Babble and Buffer Overrun events properly
  xhci: process isoc TD properly when there was a transaction error mid TD.
  xhci: fix off by one check when adding a secondary interrupter.
  xhci: fix possible null pointer dereference at secondary interrupter removal
  ...

Merge tag 'i2c-for-6.8-rc3' of git://git./linux/kernel/git/wsa/linux

Pull i2c fixlet from Wolfram Sang:
 "MAINTAINERS update to point people to the new tree for i2c host driver
  changes"

* tag 'i2c-for-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  MAINTAINERS: Update i2c host drivers repository

Merge tag 'dmaengine-fix-6.8' of git://git./linux/kernel/git/vkoul/dmaengine

Pull dmaengine fixes from Vinod Koul:
 "Core:

   - fix return value of is_slave_direction() for D2D dma

  Driver fixes for:

   - Documentaion fixes to resolve warnings for at_hdmac driver

   - bunch of fsl driver fixes for memory leaks, and useless kfree

   - TI edma and k3 fixes for packet error and null pointer checks"

* tag 'dmaengine-fix-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
  dmaengine: at_hdmac: add missing kernel-doc style description
  dmaengine: fix is_slave_direction() return false when DMA_DEV_TO_DEV
  dmaengine: fsl-qdma: Remove a useless devm_kfree()
  dmaengine: fsl-qdma: Fix a memory leak related to the queue command DMA
  dmaengine: fsl-qdma: Fix a memory leak related to the status queue DMA
  dmaengine: ti: k3-udma: Report short packet errors
  dmaengine: ti: edma: Add some null pointer checks to the edma_probe
  dmaengine: fsl-dpaa2-qdma: Fix the size of dma pools
  dmaengine: at_hdmac: fix some kernel-doc warnings

Merge tag 'phy-fixes-6.8' of git://git./linux/kernel/git/phy/linux-phy

Pull phy driver fixes from Vinod Koul:

 - TI null pointer dereference

 - missing erdes mux entry in lan966x driver

 - Return of error code in renesas driver

 - Serdes init sequence and register offsets for IPQ drivers

* tag 'phy-fixes-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
  phy: ti: phy-omap-usb2: Fix NULL pointer dereference for SRP
  phy: lan966x: Add missing serdes mux entry
  phy: renesas: rcar-gen3-usb2: Fix returning wrong error code
  phy: qcom-qmp-usb: fix serdes init sequence for IPQ6018
  phy: qcom-qmp-usb: fix register offsets for ipq8074/ipq6018

Merge tag 'i2c-host-fixes-6.8-rc3' of git://git./linux/kernel/git/andi.shyti/linux into i2c/for-current

Just a maintenance patch that updates the repository where the
i2c host and muxes related patches will be collected.

Merge tag 'perf-tools-fixes-for-v6.8-1-2024-02-01' of git://git./linux/kernel/git/perf/perf-tools

Pull perf tools fixes from Arnaldo Carvalho de Melo:
 "Vendor events:

   - Intel Alderlake/Sapphire Rapids metric fixes, the CPU type
     ("cpu_atom", "cpu_core") needs to be used as a prefix to be
     considered on a metric formula, detected via one of the 'perf test'
     entries.

  'perf test' fixes:

   - Fix the creation of event selector lists on 'perf test' entries, by
     initializing the sample ID flag, which is done by 'perf record', so
     this fix affects only the tests, the common case isn't affected

   - Make 'perf list' respect debug settings (-v) to fix its 'perf test'
     entry

   - Fix 'perf script' test when python support isn't enabled

   - Special case 'perf script' tests on s390, where only DWARF call
     graphs are supported and only on software events

   - Make 'perf daemon' signal test less racy

  Compiler warnings/errors:

   - Remove needless malloc(0) call in 'perf top' that triggers
     -Walloc-size

   - Fix calloc() argument order to address error introduced in gcc-14

  Build:

   - Make minimal shellcheck version to v0.6.0, avoiding the build to
     fail with older versions

  Sync kernel header copies:

   - stat.h to pick STATX_MNT_ID_UNIQUE

   - msr-index.h to pick IA32_MKTME_KEYID_PARTITIONING

   - drm.h to pick DRM_IOCTL_MODE_CLOSEFB

   - unistd.h to pick {list,stat}mount,
     lsm_{[gs]et_self_attr,list_modules} syscall numbers

   - x86 cpufeatures to pick TDX, Zen, APIC MSR fence changes

   - x86's mem{cpy,set}_64.S used in 'perf bench'

   - Also, without tooling effects: asm-generic/unaligned.h, mount.h,
     fcntl.h, kvm headers"

* tag 'perf-tools-fixes-for-v6.8-1-2024-02-01' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (21 commits)
  perf tools headers: update the asm-generic/unaligned.h copy with the kernel sources
  tools include UAPI: Sync linux/mount.h copy with the kernel sources
  perf evlist: Fix evlist__new_default() for > 1 core PMU
  tools headers: Update the copy of x86's mem{cpy,set}_64.S used in 'perf bench'
  tools headers x86 cpufeatures: Sync with the kernel sources to pick TDX, Zen, APIC MSR fence changes
  tools headers UAPI: Sync unistd.h to pick {list,stat}mount, lsm_{[gs]et_self_attr,list_modules} syscall numbers
  perf vendor events intel: Alderlake/sapphirerapids metric fixes
  tools headers UAPI: Sync kvm headers with the kernel sources
  perf tools: Fix calloc() arguments to address error introduced in gcc-14
  perf top: Remove needless malloc(0) call that triggers -Walloc-size
  perf build: Make minimal shellcheck version to v0.6.0
  tools headers UAPI: Update tools's copy of drm.h headers to pick DRM_IOCTL_MODE_CLOSEFB
  perf test shell daemon: Make signal test less racy
  perf test shell script: Fix test for python being disabled
  perf test: Workaround debug output in list test
  perf list: Add output file option
  perf list: Switch error message to pr_err() to respect debug settings (-v)
  perf test: Fix 'perf script' tests on s390
  tools headers UAPI: Sync linux/fcntl.h with the kernel sources
  tools arch x86: Sync the msr-index.h copy with the kernel sources to pick IA32_MKTME_KEYID_PARTITIONING
  ...