git.kernel.dk Git - linux-block.git/log

drm/ssd130x: Add support for the SSD132x OLED controller family

The Solomon SSD132x controllers (such as the SSD1322, SSD1325 and SSD1327)
are used by 16 grayscale dot matrix OLED panels, extend the driver to also
support this chip family.

Instead adding an indirection level to allow the same modesetting pipeline
to be used by both controller families, add another pipeline for SSD132x.

This leads to some code duplication but it makes the driver easier to read
and reason about. Once other controller families are added (e.g: SSD133x),
some common code can be factored out in driver helpers to be shared by the
different families. But that can be done later once these patterns emerge.

Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231014071520.1342189-5-javierm@redhat.com

drm/ssd130x: Rename commands that are shared across chip families

There are some commands that are shared between the SSD130x and SSD132x
controller families, define these as a common SSD13XX set of commands.

Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231014071520.1342189-4-javierm@redhat.com

drm/ssd130x: Add a controller family id to the device info data

To allow the driver to have a per Solomon display controller modesetting
pipeline and support aother controller families besides SSD130x.

Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231014071520.1342189-3-javierm@redhat.com

drm/ssd130x: Replace .page_height field in device info with a constant

This deemed useful to avoid hardcoding a page height and allow to support
other Solomon controller families, but dividing the screen in pages seems
to be something that is specific to the SSD130x chip family.

For example, SSD132x chip family divides the screen in segments (columns)
and common outputs (rows), so the concept of screen pages does not exist
for the SSD132x family.

Let's drop this field from the device info struct and just use a constant
SSD130X_PAGE_HEIGHT macro to define the page height. While being there,
replace hardcoded 8 values in places where it is used as the page height.

Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231014071520.1342189-2-javierm@redhat.com

drm/gpuvm: Dual-licence the drm_gpuvm code GPL-2.0 OR MIT

Dual-licence in order to make it possible for other non-GPL os'es
to re-implement the code. The use of EXPORT_SYMBOL_GPL() is intentionally
left untouched to prevent use of drm_gpuvm as a proxy for non-GPL drivers
to access GPL-only kernel symbols.

Much of the ideas and algorithms used in the drm_gpuvm code is already
present in one way or another in MIT-licensed code.

Cc: Danilo Krummrich <dakr@redhat.com>
Cc: airlied@gmail.com
Cc: daniel@ffwll.ch
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Acked-by: Danilo Krummrich <dakr@redhat.com>
Reviewed-by: Francois Dugast <francois.dugast@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231010142725.8920-1-thomas.hellstrom@linux.intel.com

Documentation/gpu: Add a VM_BIND async document

Add a motivation for and description of asynchronous VM_BIND operation

v2:
- Fix typos (Nirmoy Das)
- Improve the description of a memory fence (Oak Zeng)
- Add a reference to the document in the Xe RFC.
- Add pointers to sample uAPI suggestions
v3:
- Address review comments (Danilo Krummrich)
- Formatting fixes
v4:
- Address typos (Francois Dugast)
- Explain why in-fences are not allowed for VM_BIND operations for long-
  running workloads (Matthew Brost)
v5:
- More typo- and style fixing
- Further clarify the implications of disallowing in-fences for VM_BIND
  operations for long-running workloads (Matthew Brost)
v6:
- Point out that a gpu_vm is a virtual GPU Address space.
  (Danilo Krummrich)
- For an explanation of dma-fences point to the dma-fence documentation.
  (Paulo Zanoni)
- Clarify that VM_BIND errors are reported synchronously. (Paulo Zanoni)
- Use an rst doc reference when pointing to the async vm_bind document
  from the xe merge plan.
- Add the VM_BIND documentation to the drm documentation table-of-content,
  using an intermediate "Misc DRM driver uAPI- and feature implementation
  guidelines"
v7:
- Update the error handling documentation to remove the VM error state.
v8:
- Clarify error handling and difference in operation support between
  async VM_BIND and sync VM_BIND. (Paulo Zanoni)
- Update the sample uAPI with a self-contained example. (Paulo Zanoni)

Cc: Paulo R Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Acked-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Danilo Krummrich <dakr@redhat.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231012132552.20196-1-thomas.hellstrom@linux.intel.com

drm/panel: st7703: Add Powkiddy RGB30 Panel Support

The Powkiddy RGB30 4 inch panel is a 4 inch 720x720 DSI panel used in
the Powkiddy RGB30 handheld gaming device. Add support for it.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231013183918.225666-4-macroalpha82@gmail.com

dt-bindings: panel: Add Powkiddy RGB30 panel compatible

The Powkiddy RGB30 panel is a 4 inch 720x720 MIPI-DSI LCD panel. It
appears to be based on the ST7703 LCD controller (this is assumed from
the init sequence similarity between this and other displays). Powkiddy
would not share the part number or name for the display from the bill
of materials and there were no obvious external markings, so name the
panel for the device (Powkiddy RGB30).

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231013183918.225666-3-macroalpha82@gmail.com

dt-bindings: vendor-prefixes: document Powkiddy

Document Powkiddy (https://powkiddy.com/).

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231013183918.225666-2-macroalpha82@gmail.com

drm/rockchip: remove NR_LAYERS macro on vop2

There are 8 layers on rk3588, so a fix defined macro is
not appropriate.

Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231013122051.1594164-1-andyshrk@163.com

drm/rockchip: remove unused struct in vop2

These structs are undefined and un used.

Fixes: 604be85547ce ("drm/rockchip: Add VOP2 driver")
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231013122036.1594090-1-andyshrk@163.com

drm/rockchip: Fix type promotion bug in rockchip_gem_iommu_map()

The "ret" variable is declared as ssize_t and it can hold negative error
codes but the "rk_obj->base.size" variable is type size_t. This means
that when we compare them, they are both type promoted to size_t and the
negative error code becomes a high unsigned value and is treated as
success. Add a cast to fix this.

Fixes: 38f993b7c59e ("drm/rockchip: Do not use DMA mapping API if attached to IOMMU domain")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/2bfa28b5-145d-4b9e-a18a-98819dd686ce@moroto.mountain

drm/bridge: lt9611uxc: fix the race in the error path

If DSI host attachment fails, the LT9611UXC driver will remove the
bridge without ensuring that there is no outstanding HPD work being
done. In rare cases this can result in the warnings regarding the mutex
being incorrect. Fix this by forcebly freing IRQ and flushing the work.

DEBUG_LOCKS_WARN_ON(lock->magic != lock)
WARNING: CPU: 0 PID: 10 at kernel/locking/mutex.c:582 __mutex_lock+0x468/0x77c
Modules linked in:
CPU: 0 PID: 10 Comm: kworker/0:1 Tainted: G     U             6.6.0-rc5-next-20231011-gd81f81c2b682-dirty #1206
Hardware name: Qualcomm Technologies, Inc. Robotics RB5 (DT)
Workqueue: events lt9611uxc_hpd_work
pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : __mutex_lock+0x468/0x77c
lr : __mutex_lock+0x468/0x77c
sp : ffff8000800a3c70
x29: ffff8000800a3c70 x28: 0000000000000000 x27: ffffd595fe333000
x26: ffff7c2f0002c005 x25: ffffd595ff1b3000 x24: ffffd595fccda5a0
x23: 0000000000000000 x22: 0000000000000002 x21: ffff7c2f056d91c8
x20: 0000000000000000 x19: ffff7c2f056d91c8 x18: fffffffffffe8db0
x17: 000000040044ffff x16: 005000f2b5503510 x15: 0000000000000000
x14: 000000000006efb8 x13: 0000000000000000 x12: 0000000000000037
x11: 0000000000000001 x10: 0000000000001470 x9 : ffff8000800a3ae0
x8 : ffff7c2f0027f8d0 x7 : ffff7c2f0027e400 x6 : ffffd595fc702b54
x5 : 0000000000000000 x4 : ffff8000800a0000 x3 : 0000000000000000
x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff7c2f0027e400
Call trace:
__mutex_lock+0x468/0x77c
mutex_lock_nested+0x24/0x30
drm_bridge_hpd_notify+0x2c/0x5c
lt9611uxc_hpd_work+0x6c/0x80
process_one_work+0x1ec/0x51c
worker_thread+0x1ec/0x3e4
kthread+0x120/0x124
ret_from_fork+0x10/0x20
irq event stamp: 15799
hardirqs last  enabled at (15799): [<ffffd595fc702ba4>] finish_task_switch.isra.0+0xa8/0x278
hardirqs last disabled at (15798): [<ffffd595fd5a1580>] __schedule+0x7b8/0xbd8
softirqs last  enabled at (15794): [<ffffd595fc690698>] __do_softirq+0x498/0x4e0
softirqs last disabled at (15771): [<ffffd595fc69615c>] ____do_softirq+0x10/0x1c

Fixes: bc6fa8676ebb ("drm/bridge/lontium-lt9611uxc: move HPD notification out of IRQ handler")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231011220002.382422-1-dmitry.baryshkov@linaro.org

drm/bridge: imx: Add i.MX93 MIPI DSI support

Freescale i.MX93 SoC embeds a Synopsys Designware MIPI DSI host
controller and a Synopsys Designware MIPI DPHY. Some configurations
and extensions to them are controlled by i.MX93 media blk-ctrl.

Add a DRM bridge for i.MX93 MIPI DSI by using existing DW MIPI DSI
bridge helpers and implementing i.MX93 MIPI DSI specific extensions.

Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230821034008.3876938-10-victor.liu@nxp.com

dt-bindings: display: bridge: Document Freescale i.MX93 MIPI DSI

Freescale i.MX93 SoC embeds a Synopsys Designware MIPI DSI host
controller and a Synopsys Designware MIPI DPHY. Some configurations
and extensions to them are controlled by i.MX93 media blk-ctrl.

Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230821034008.3876938-9-victor.liu@nxp.com

drm/bridge: synopsys: dw-mipi-dsi: Disable HSTX and LPRX timeout check

According to Synopsys DW MIPI DSI host databook, HSTX and LPRX timeout
contention detections are measured in TO_CLK_DIVISION cycles. However,
the current driver programs magic values to TO_CLK_DIVISION, HSTX_TO_CNT
and LPRX_TO_CNT register fields, which makes timeout error event wrongly
happen for some video modes, at least for the typical 1920x1080p@60 video
mode read from a HDMI monitor driven by ADV7535 DSI to HDMI bridge.
While at it, the current driver doesn't enable interrupt to handle or
complain about the error status, so true error just happens silently
except for display distortions by visual check.

Disable the timeout check by setting those timeout register fields to
zero for now until someone comes along with better computations for the
timeout values. Although the databook doesn't mention what happens when
they are set to zero, it turns out the false error doesn't happen for
the 1920x1080p@60 video mode at least.

Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230821034008.3876938-8-victor.liu@nxp.com

drm/bridge: synopsys: dw-mipi-dsi: Set minimum lane byte clock cycles for HSA and HBP

According to Synopsys support channel, each region of HSA, HBP and HFP must
have minimum number of 10 bytes where constant 4 bytes are for HSS or HSE
and 6 bytes are for blanking packet(header + CRC).  Hence, the below table
comes in.

+------------+----------+-------+
| data lanes | min lbcc | bytes |
+------------+----------+-------+
|     1      |    10    |  1*10 |
+------------+----------+-------+
|     2      |    5     |  2*5  |
+------------+----------+-------+
|     3      |    4     |  3*4  |
+------------+----------+-------+
|     4      |    3     |  4*3  |
+------------+----------+-------+

Implement the minimum lbcc numbers to make sure that the values programmed
into DSI_VID_HSA_TIME and DSI_VID_HBP_TIME registers meet the minimum
number requirement.  For DSI_VID_HLINE_TIME register, it seems that the
value programmed should be based on mode->htotal as-is, instead of sum up
HSA, HBP, HFP and HDISPLAY.

This helps the case where Raydium RM67191 DSI panel is connected, since
it's video timing for hsync length is only 2 pixels and without this patch
the programmed value for DSI_VID_HSA_TIME is only 2 with 4 data lanes.

Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230821034008.3876938-7-victor.liu@nxp.com

drm/bridge: synopsys: dw-mipi-dsi: Use pixel clock rate to calculate lbcc

To get better accuration, use pixel clock rate to calculate lbcc instead of
lane_mbps since the pixel clock rate is in KHz while lane_mbps is in MHz.
Without this, distorted image can be seen on a HDMI monitor connected with
i.MX93 11x11 EVK through ADV7535 DSI to HDMI bridge in 1920x1080p@60 video
mode.

Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230821034008.3876938-6-victor.liu@nxp.com

drm/bridge: synopsys: dw-mipi-dsi: Add mode fixup support

Vendor drivers may need to fixup mode due to pixel clock tree limitation,
so introduce the ->mode_fixup() callcack to struct dw_mipi_dsi_plat_data
and call it at atomic check stage if available.

Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230821034008.3876938-5-victor.liu@nxp.com

drm/bridge: synopsys: dw-mipi-dsi: Force input bus flags

The DATAEN_ACTIVE_LOW bit in DSI_DPI_CFG_POL register is set to zero,
so set the DRM_BUS_FLAG_DE_HIGH flag in input_bus_cfg.flags.  It appears
that the DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE flag also makes sense, so
set it in input_bus_cfg.flags too.  With this patch, the flags set by
drm_atomic_bridge_propagate_bus_flags() are overridden (see comment in
that function) in case any downstream bridges propagates invalid flags
to this bridge.  A real problematic case is to connect a RM67191 MIPI
DSI panel whose driver sets DRM_BUS_FLAG_DE_LOW and
DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE bus flags.

Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230821034008.3876938-4-victor.liu@nxp.com

drm/bridge: synopsys: dw-mipi-dsi: Add input bus format negotiation support

Introduce ->get_input_bus_fmts() callback to struct dw_mipi_dsi_plat_data
so that vendor drivers can implement specific methods to get input bus
formats for Synopsys DW MIPI DSI.

While at it, implement a generic callback for ->atomic_get_input_bus_fmts(),
where we try to get the input bus formats through pdata->get_input_bus_fmts()
first. If it's unavailable, fall back to the only format - MEDIA_BUS_FMT_FIXED,
which matches the default behavior if ->atomic_get_input_bus_fmts() is not
implemented as ->atomic_get_input_bus_fmts()'s kerneldoc indicates.

Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230821034008.3876938-3-victor.liu@nxp.com

drm/bridge: synopsys: dw-mipi-dsi: Add dw_mipi_dsi_get_bridge() helper

Add dw_mipi_dsi_get_bridge() helper so that it can be used by vendor
drivers which implement vendor specific extensions to Synopsys DW MIPI DSI.

Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230821034008.3876938-2-victor.liu@nxp.com

drm: adv7511: Add hpd_override_enable variable to struct adv7511_chip_info

As per spec, it is allowed to pulse the HPD signal to indicate that the
EDID information has changed. Some monitors do this when they wake up
from standby or are enabled. When the HPD goes low the adv7511 is
reset and the outputs are disabled which might cause the monitor to
go to standby again. To avoid this we ignore the HPD pin for the
first few seconds after enabling the output. On the other hand,
adv7535 require to enable HPD Override bit for proper HPD.

Add hpd_override_enable variable to struct adv7511_chip_info to handle
this scenario.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230830142358.275459-9-biju.das.jz@bp.renesas.com

drm: adv7511: Add link_config variable to struct adv7511_chip_info

The ADV7511 needs link configuration whereas ADV75{33,35} does not need
it. Add a variable link_config to struct adv7511_chip_info to handle
this difference.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230830142358.275459-8-biju.das.jz@bp.renesas.com

drm: adv7511: Add has_dsi variable to struct adv7511_chip_info

The ADV7533 and ADV7535 have DSI support. Add a variable has_dsi to
struct adv7511_chip_info for handling configuration related to DSI.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230830142358.275459-7-biju.das.jz@bp.renesas.com

drm: adv7511: Add reg_cec_offset variable to struct adv7511_chip_info

The ADV7533 and ADV7535 have an offset(0x70) for the CEC register map
compared to ADV7511. Add the reg_cec_offset variable to struct
adv7511_chip_info to handle this difference and drop the reg_cec_offset
variable from struct adv7511.

This will avoid assigning reg_cec_offset based on chip type and also
testing for multiple chip types by calling adv7533_patch_cec_registers().

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230830142358.275459-6-biju.das.jz@bp.renesas.com

drm: adv7511: Add supply_names and num_supplies variables to struct adv7511_chip_info

The ADV7511 has 5 power supplies compared to 7 that of ADV75{33,35}. Add
supply_names and num_supplies variables to struct adv7511_chip_info to
handle this difference.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230830142358.275459-5-biju.das.jz@bp.renesas.com

drm: adv7511: Add max_lane_freq_khz variable to struct adv7511_chip_info

The ADV7533 supports a maximum lane clock of 800MHz whereas it is 891MHz
for ADV7535. Add max_lane_freq_khz variable to struct adv7511_chip_info to
handle this difference.

While at it, drop the unused local variable max_lane_freq.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230830142358.275459-4-biju.das.jz@bp.renesas.com

drm: adv7511: Add max_mode_clock_khz variable to struct adv7511_chip_info

The ADV7533 supports a maximum pixel clock of 80MHz whereas it is 148.5MHz
for ADV7535. Add max_mode_clock_khz variable to struct adv7511_chip_info to
handle this difference.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Adam Ford <aford173@gmail.com>
Tested-by: Adam Ford <aford173@gmail.com> #imx8mm-beacon
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230830142358.275459-3-biju.das.jz@bp.renesas.com

drm: adv7511: Add struct adv7511_chip_info and use i2c_get_match_data()

Add struct adv7511_chip_info to handle hw differences between various
chips rather checking against the 'type' variable in various places.
Replace 'adv->type'->'info->type' by moving variable 'type' from
struct adv7511 to struct adv7511_chip_info and add adv7511_chip_info as
device data for both OF and ID tables instead of the device type.

Simplify the probe() by replacing of_device_get_match_data() and ID lookup
for retrieving match data with i2c_get_match_data().

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Tested-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230830142358.275459-2-biju.das.jz@bp.renesas.com

drm/panel: st7703: Fix timings when entering/exiting sleep

Fix flickering of the pinephone's XDB599 panel that happens after
resume.

Extend the delay after issuing the command to exit sleep mode from 60 to
120 msec as per the controller's specification.

Introduce a 120 msec delay after issuing the command to enter sleep
mode. This is needed in order for the controller to reliably finalize
the sleep in sequence before switching of power supply.

In contrast to the JH057N panel, the XBD599 panel does not require a 20
msec delay after initialization and exiting sleep mode. Therefore, move
the delay into the already existing device specific initialization
function.

The XDB599 does not require a 20 msec delay between the SETBGP and
SETVCOM commands. Therefore, remove the delay from the device specific
initialization function.

Signed-off-by: Frank Oltmanns <frank@oltmanns.dev>
Cc: Ondrej Jirman <megi@xff.cz>
Reported-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Tested-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230213123238.76889-2-frank@oltmanns.dev

drm/panel: st7703: Pick different reset sequence

Switching to a different reset sequence, enabling IOVCC before enabling
VCC.

There also needs to be a delay after enabling the supplies and before
deasserting the reset. The datasheet specifies 1ms after the supplies
reach the required voltage. Use 10-20ms to also give the power supplies
some time to reach the required voltage, too.

This fixes intermittent panel initialization failures and screen
corruption during resume from sleep on panel xingbangda,xbd599 (e.g.
used in PinePhone).

Signed-off-by: Ondrej Jirman <megi@xff.cz>
Signed-off-by: Frank Oltmanns <frank@oltmanns.dev>
Reported-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Tested-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230211171748.36692-2-frank@oltmanns.dev

drm/ssd130x: Fix atomic_check for disabled planes

The plane's atomic_check returns -EINVAL if the CRTC has not been
set. This is the case for disabled planes, for which atomic_check
should return 0. For disabled planes, it also omits the mandatory
call to drm_atomic_helper_check_plane_state().

Replace the test with the boiler-plate code that first invokes
drm_atomic_helper_check_plane_state() and then tests for the plane
to be visible. Return early for non-visible planes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: d51f9fbd98b6 ("drm/ssd130x: Store the HW buffer in the driver-private CRTC state")
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Javier Martinez Canillas <javierm@redhat.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231009141018.11291-7-tzimmermann@suse.de

MAINTAINERS: Update entry for megachips-stdpxxxx-ge-b850v3-fw

Replace Martin, who has left GE.

Signed-off-by: Ian Ray <ian.ray@ge.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230921104751.56544-2-ian.ray@ge.com

drm/bridge: megachips-stdpxxxx-ge-b850v3-fw: switch to drm_do_get_edid()

Migrate away from custom EDID parsing and validity checks.

Note: This is a follow-up to the original RFC by Jani [1]. The first
submission in this series should have been marked v2.

[1] https://patchwork.freedesktop.org/patch/msgid/20230901102400.552254-1-jani.nikula@intel.com

Co-developed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ian Ray <ian.ray@ge.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230921104751.56544-1-ian.ray@ge.com

accel/ivpu: Add ivpu_bo_vaddr() and ivpu_bo_size()

Use:
  - ivpu_bo_vaddr(bo) instead of bo->kvaddr
  - ivpu_bo_size(bo) instead of bo->base.size

This is a preparation for switch to a drm_gem_shmem_object as a base for
ivpu_bo, where:
  - bo->kvaddr becomes bo->base.vaddr
  - bo->base.size becomes bo->base.base.size

Using ivpu_bo_vaddr() and ivpu_bo_size() increases the readability of
the code.

Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901094957.168898-9-stanislaw.gruszka@linux.intel.com

drm/simpledrm: Fix power domain device link validity check

We need to check if a link is non-NULL before trying to delete it.

Fixes: 61df9ca23107 ("drm/simpledrm: Add support for multiple "power-domains"")
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Janne Grunau <j@jannau.net>
Cc: Eric Curtin <ecurtin@redhat.com>
Cc: Neal Gompa <neal@gompa.dev>
Cc: Sven Peter <sven@svenpeter.dev>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20231011143230.1107731-1-thierry.reding@gmail.com

iosys-map: fix kernel-doc typos

Correct spelling of "beginning".

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230930221428.18463-2-rdunlap@infradead.org

drm: Replace drm_framebuffer plane size functions with its equivalents

The functions drm_framebuffer_plane_{width,height} and
fb_plane_{width,height} do exactly the same job of its
equivalents drm_format_info_plane_{width,height} from drm_fourcc.

The only reason to have these functions on drm_framebuffer
would be if they would added a abstraction layer to call it just
passing a drm_framebuffer pointer and the desired plane index,
which is not the case, where these functions actually implements
just part of it. In the actual implementation, every call to both
drm_framebuffer_plane_{width,height} and fb_plane_{width,height} should
pass some drm_framebuffer attribute, which is the same as calling the
drm_format_info_plane_{width,height} functions.

The drm_format_info_pane_{width,height} functions are much more
consistent in both its implementation and its location on code. The
kind of calculation that they do is intrinsically derivated from the
drm_format_info struct and has not to do with drm_framebuffer, except
by the potential motivation described above, which is still not a good
justification to have drm_framebuffer functions to calculate it.

So, replace each drm_framebuffer_plane_{width,height} and
fb_plane_{width,height} call to drm_format_info_plane_{width,height}
and remove them.

Signed-off-by: Carlos Eduardo Gallo Filho <gcarlos@disroot.org>
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230926141519.9315-3-gcarlos@disroot.org

drm: Remove plane hsub/vsub alignment requirement for core helpers

The drm_format_info_plane_{height,width} functions was implemented using
regular division for the plane size calculation, which cause issues [1][2]
when used on contexts where the dimensions are misaligned with relation
to the subsampling factors. So, replace the regular division by the
DIV_ROUND_UP macro.

This allows these functions to be used in more drivers, making further
work to bring more core presence on them possible.

[1] http://patchwork.freedesktop.org/patch/msgid/20170321181218.10042-3-ville.syrjala@linux.intel.com
[2] https://patchwork.freedesktop.org/patch/msgid/20211026225105.2783797-2-imre.deak@intel.com

Signed-off-by: Carlos Eduardo Gallo Filho <gcarlos@disroot.org>
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230926141519.9315-2-gcarlos@disroot.org

fbdev: Replace fb_pgprotect() with pgprot_framebuffer()

Rename the fbdev mmap helper fb_pgprotect() to pgprot_framebuffer().
The helper sets VMA page-access flags for framebuffers in device I/O
memory.

Also clean up the helper's parameters and return value. Instead of
the VMA instance, pass the individial parameters separately: existing
page-access flags, the VMAs start and end addresses and the offset
in the underlying device memory rsp file. Return the new page-access
flags. These changes align pgprot_framebuffer() with other pgprot_()
functions.

v4:
* fix commit message (Christophe)
v3:
* rename fb_pgprotect() to pgprot_framebuffer() (Arnd)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # m68k
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230922080636.26762-3-tzimmermann@suse.de

fbdev: Avoid file argument in fb_pgprotect()

Only PowerPC's fb_pgprotect() needs the file argument, although
the implementation in either phys_mem_access_prot() or
pci_phys_mem_access_prot() does not use it. Pass NULL to the internal
helper in preparation of further updates. A later patch will remove
the file parameter from fb_pgprotect().

While at it, replace the shift operation with PHYS_PFN().

v5:
* state function names in commit description (Javier)

Suggested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230922080636.26762-2-tzimmermann@suse.de

drm/tegra: gem: Do not return NULL in tegra_bo_mmap()

It's confusing for a function to return NULL and ERR_PTR()-encoded error
codes on failure. Make sure we only ever return the latter since that's
what callers already expect.

Reported-by: Sui Jingfeng <suijingfeng@loongson.cn>
Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZSVuVcqdGfGtQIQj@orome.fritz.box

drm/tegra: Zero-initialize iosys_map

UBSAN reports an invalid load for bool, as the iosys_map is read
later without being initialized. Zero-initialize it to avoid this.

Reported-by: Ashish Mhetre <amhetre@nvidia.com>
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901115910.701518-2-cyndis@kapsi.fi

gpu: host1x: Correct allocated size for contexts

Original implementation over allocates the memory size for the
contexts list. The size of memory for the contexts list is based
on the number of iommu groups specified in the device tree.

Fixes: 8aa5bcb61612 ("gpu: host1x: Add context device management code")
Signed-off-by: Johnny Liu <johnliu@nvidia.com>
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901115910.701518-1-cyndis@kapsi.fi

gpu: host1x: Syncpoint interrupt sharding

Support sharded syncpoint interrupts on Tegra234+. This feature
allows specifying one of eight interrupt lines for each syncpoint
to lower processing latency of syncpoint threshold
interrupts.

Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901114008.672433-1-cyndis@kapsi.fi

gpu: host1x: Enable system suspend callbacks

With the previous CDMA stop fix, executing runtime PM ops around
system suspend now makes channel submissions work after system
suspend, so do that.

Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901111510.663401-3-cyndis@kapsi.fi

gpu: host1x: Stop CDMA before suspending

Before going into suspend, wait all CDMA to go idle and stop it.
This will ensure no channel is still active while we enter
suspend, and ensures the driver doesn't think that CDMA is still
active when coming back from suspend (as HW state has been reset).

Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901111510.663401-2-cyndis@kapsi.fi

gpu: host1x: Add locking in channel allocation

Add locking around channel allocation to avoid race conditions.

Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901111510.663401-1-cyndis@kapsi.fi

drm/tegra: hub: Increase buffer size to ensure all possible values can be stored

When converting from int to string, we must allow for up to 10-chars (2147483647).

Fixes the following W=1 kernel build warning(s):

drivers/gpu/drm/tegra/hub.c: In function ‘tegra_display_hub_probe’:
drivers/gpu/drm/tegra/hub.c:1106:47: warning: ‘%u’ directive output may be truncated writing between 1 and 10 bytes into a region of size 4 [-Wformat-truncation=]
drivers/gpu/drm/tegra/hub.c:1106:42: note: directive argument in the range [0, 4294967294]
drivers/gpu/drm/tegra/hub.c:1106:17: note: ‘snprintf’ output between 6 and 15 bytes into a destination of size 8

Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230824073710.2677348-16-lee@kernel.org

drm/tegra: Remove two unused function declarations

Commit 776dc3840367 ("drm/tegra: Move subdevice infrastructure to host1x")
removed the implementation but not the declaration.

Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230809030226.3412-1-yuehaibing@huawei.com

drm/tegra: Remove surplus else after return

else is not generally useful after return

Signed-off-by: Sui Jingfeng <suijingfeng@loongson.cn>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230626143331.640454-2-suijingfeng@loongson.cn

drm/bridge_connector: implement oob_hotplug_event

Implement the oob_hotplug_event() callback. Translate it to the HPD
notification sent to the HPD bridge in the chain.

Reviewed-by: Janne Grunau <j@jannau.net>
Link: https://lore.kernel.org/r/20231009174048.2695981-4-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231009174048.2695981-4-dmitry.baryshkov@linaro.org

drm/bridge_connector: stop filtering events in drm_bridge_connector_hpd_cb()

In some cases the bridge drivers would like to receive hotplug events
even in the case new status is equal to the old status. In the DP case
this is used to deliver "attention" messages to the DP host. Stop
filtering the events in the drm_bridge_connector_hpd_cb() and let
drivers decide whether they would like to receive the event or not.

Reviewed-by: Janne Grunau <j@jannau.net>
Link: https://lore.kernel.org/r/20231009174048.2695981-3-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231009174048.2695981-3-dmitry.baryshkov@linaro.org

drm: Add HPD state to drm_connector_oob_hotplug_event()

In some implementations, such as the Qualcomm platforms, the display
driver has no way to query the current HPD state and as such it's
impossible to distinguish between disconnect and attention events.

Add a parameter to drm_connector_oob_hotplug_event() to pass the HPD
state.

Also push the test for unchanged state in the displayport altmode driver
into the i915 driver, to allow other drivers to act upon each update.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20231009174048.2695981-2-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231009174048.2695981-2-dmitry.baryshkov@linaro.org

Merge drm/drm-next into drm-misc-next

Updating drm-misc-next to the state of Linux v6.6-rc2.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

drm/panel: ltk050h3146w: add support for Leadtek LTK050H3148W-CTA6 variant

The LTK050H3148W-CTA6 is a 5.0" 720x1280 DSI display, whose driving
controller is a Himax HX8394-F, slightly different from LTK050H3146W by
its init sequence, mode details and mode flags.

Cc: Quentin Schulz <foss+kernel@0leil.net>
Signed-off-by: Klaus Goger <klaus.goger@theobroma-systems.com>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220131164723.714836-2-quentin.schulz@theobroma-systems.com

dt-bindings: ltk050h3146w: add compatible for LTK050H3148W-CTA6 variant

The LTK050H3148W-CTA6 is a 5.0" 720x1280 DSI display, whose driving
controller is a Himax HX8394-F, slightly different from LTK050H3146W by
its init sequence, mode details and mode flags.

Cc: Quentin Schulz <foss+kernel@0leil.net>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220131164723.714836-3-quentin.schulz@theobroma-systems.com

drm/panel: ltk050h3146w: add mipi_dsi_device.mode_flags to of_match_data

To prepare for a new display to be supported by this driver which has a
slightly different set of DSI mode related flags, let's move the
currently hardcoded mode flags to the .data field of of_device_id
structure.

Cc: Quentin Schulz <foss+kernel@0leil.net>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220131164723.714836-1-quentin.schulz@theobroma-systems.com

drm/panel/panel-tpo-tpg110: fix a possible null pointer dereference

In tpg110_get_modes(), the return value of drm_mode_duplicate() is
assigned to mode, which will lead to a NULL pointer dereference on
failure of drm_mode_duplicate(). Add a check to avoid npd.

Signed-off-by: Ma Ke <make_ruc2021@163.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231009090446.4043798-1-make_ruc2021@163.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231009090446.4043798-1-make_ruc2021@163.com

drm/panel: fix a possible null pointer dereference

In versatile_panel_get_modes(), the return value of drm_mode_duplicate()
is assigned to mode, which will lead to a NULL pointer dereference
on failure of drm_mode_duplicate(). Add a check to avoid npd.

Signed-off-by: Ma Ke <make_ruc2021@163.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231007033105.3997998-1-make_ruc2021@163.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231007033105.3997998-1-make_ruc2021@163.com

drm/rockchip: dsi: Use devm_platform_get_and_ioremap_resource()

Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.

Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230421081303.122452-1-yang.lee@linux.alibaba.com

drm/rockchip: remove redundant of_match_ptr

The driver depends on CONFIG_OF, so it is not necessary to use
of_match_ptr here.

Even for drivers that do not depend on CONFIG_OF, it's almost always
better to leave out the of_match_ptr(), since the only thing it can
possibly do is to save a few bytes of .text if a driver can be used both
with and without it. Hence we remove of_match_ptr.

Signed-off-by: Zhu Wang <wangzhu9@huawei.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230731125304.87059-1-wangzhu9@huawei.com

drm/rockchip: cdn-dp: Fix some error handling paths in cdn_dp_probe()

cdn_dp_audio_codec_init() can fail. So add some error handling.

If component_add() fails, the previous cdn_dp_audio_codec_init() call
should be undone, as already done in the remove function.

Fixes: 88582f564692 ("drm/rockchip: cdn-dp: Don't unregister audio dev when unbinding")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/8494a41602fadb7439630921a9779640698f2f9f.1693676045.git.christophe.jaillet@wanadoo.fr

drm/rockchip: vop2: Convert to use maple tree register cache

The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache.

Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231001-drm-rockchip-maple-v1-1-ca396ab75be7@kernel.org

drm/rockchip: vop2: Demote message in mod_supported to drm_dbg_kms

Checking if a modifier is supported by a plane is normal behavior. It is
normal that a plane may not support certain modifiers. Failing the check
doesn't justify an error message in the kernel log and may mislead
users.

Demote the error message to drm_dbg_kms to only print the message if the
respective debug messages are enabled. This is similar to the behavior
in rockchip_drm_vop.c.

Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231009103753.830458-1-m.tretter@pengutronix.de

Documentation/gpu: fix Panfrost documentation build warnings

Fix issues revealed by `make htmldocs` after adding Panfrost DRM
documentation file.

Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Fixes: f11b0417eec2 ("drm/panfrost: Add fdinfo support GPU load metrics")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202310030917.Txzlpoeq-lkp@intel.com
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231005141239.132783-1-adrian.larumbe@collabora.com

drm/panel-simple: allow LVDS format override

Some panels support multiple LVDS data mapping formats, which can be
used e.g. run displays on jeida-18 format when only 3 LVDS lanes are
available.

Add parsing of an optional data-mapping devicetree property, which also
touches up the bits per color to match the bus format.

Signed-off-by: Johannes Zink <j.zink@pengutronix.de>
Link: https://lore.kernel.org/r/20230523-simplepanel_support_nondefault_datamapping-v5-3-0d7928edafab@pengutronix.de
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230523-simplepanel_support_nondefault_datamapping-v5-3-0d7928edafab@pengutronix.de

dt-bindings: display: simple: support non-default data-mapping

Some Displays support more than just a single default LVDS data mapping,
which can be used to run displays on only 3 LVDS lanes in the jeida-18
data-mapping mode.

Add an optional data-mapping property to allow overriding the default
data mapping. As it does not generally apply to any display and bus, use
it selectively on the innolux,g101ice-l01, which supports changing the
data mapping via a strapping pin.

Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Johannes Zink <j.zink@pengutronix.de>
Link: https://lore.kernel.org/r/20230523-simplepanel_support_nondefault_datamapping-v5-2-0d7928edafab@pengutronix.de
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230523-simplepanel_support_nondefault_datamapping-v5-2-0d7928edafab@pengutronix.de

dt-bindings: display: move LVDS data-mapping definition to separate file

As the LVDS data-mapping property is required in multiple bindings: move
it to separate file and include instead of duplicating it.

Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Johannes Zink <j.zink@pengutronix.de>
Link: https://lore.kernel.org/r/20230523-simplepanel_support_nondefault_datamapping-v5-1-0d7928edafab@pengutronix.de
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230523-simplepanel_support_nondefault_datamapping-v5-1-0d7928edafab@pengutronix.de

drm/bridge: samsung-dsim: calculate porches in Hz

Calculating the byte_clk in kHz is imprecise for a hs_clock of 55687500
Hz, which may be used with a pixel clock of 74.25 MHz with mode
1920x1080-30.

Fix the calculation by using HZ instead of kHZ.

This requires to change the type to u64 to prevent overflows of the
integer type.

Reviewed-by: Adam Ford <aford173@gmail.com> #imx8mm-beacon
Tested-by: Adam Ford <aford173@gmail.com> #imx8mm-beacon
Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de> # Kontron BL i.MX8MM + Waveshare 10.1inch HDMI LCD (E)
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20230818-samsung-dsim-v2-5-846603df0e0a@pengutronix.de
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230818-samsung-dsim-v2-5-846603df0e0a@pengutronix.de

drm/bridge: samsung-dsim: adjust porches by rounding up

Rounding the porches up instead of down fixes the samsung-dsim at
some more resolutions and refresh rates:

The following resolutions are working with rounded-up porches, but don't
work when the porches are rounded down:

1920x1080-59.94
1920x1080-30.00
1920x1080-29.97
1920x1080-25.00
1680x1050-59.88
1280x1024-75.02
1200x960-59.99
1280x720-50.00
1024x768-75.03
1024x768-60.00
640x480-60.00
640x480-59.94

Reviewed-by: Adam Ford <aford173@gmail.com> #imx8mm-beacon
Tested-by: Adam Ford <aford173@gmail.com> #imx8mm-beacon
Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de> # Kontron BL i.MX8MM + Waveshare 10.1inch HDMI LCD (E)
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20230818-samsung-dsim-v2-4-846603df0e0a@pengutronix.de
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230818-samsung-dsim-v2-4-846603df0e0a@pengutronix.de

drm/bridge: samsung-dsim: update PLL reference clock

The PLL requires a clock frequency in a certain platform-dependent range
after the pre-divider. The reference clock for the PLL may change due to
changes to it's parent clock. Thus, the frequency may be out of range or
unsuited for generating the high speed clock for MIPI DSI.

Try to keep the pre-devider small, and set the reference clock close to
the upper limit before recalculating the PLL configuration. Use a
divider with a power of two for the reference clock as this seems to
work best in my tests.

Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de> # Kontron BL i.MX8MM + Waveshare 10.1inch HDMI LCD (E)
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20230818-samsung-dsim-v2-3-846603df0e0a@pengutronix.de
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230818-samsung-dsim-v2-3-846603df0e0a@pengutronix.de

drm/bridge: samsung-dsim: reread ref clock before configuring PLL

The PLL reference clock may change at runtime when its parent clock
changes. For example, this may happen on the i.MX8M Nano if the
reference clock is a child of the Video PLL. If the pixel clock changes,
this may propagate to the Video PLL and as a side effect change the
reference clock. Thus, reading the clock rate during probe is not
sufficient to correctly configure the PLL for the expected hs clock.

Read the actual rate of the reference clock before calculating the PLL
configuration parameters.

Note that the "samsung,pll-clock-frequency" is always preferred and PLL
reference clock is only read from the clock tree if that device tree
property is not set.

Reviewed-by: Inki Dae <inki.dae@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de> # Kontron BL i.MX8MM + Waveshare 10.1inch HDMI LCD (E)
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20230818-samsung-dsim-v2-2-846603df0e0a@pengutronix.de
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230818-samsung-dsim-v2-2-846603df0e0a@pengutronix.de

drm/bridge: samsung-dsim: add more mipi-dsi device debug information

Since the MIPI configuration can be changed on demand it is very useful
to print more MIPI settings during the MIPI device attach step.

Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Adam Ford <aford173@gmail.com> #imx8mm-beacon
Tested-by: Adam Ford <aford173@gmail.com> #imx8mm-beacon
Reviewed-by: Inki Dae <inki.dae@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de> # Kontron BL i.MX8MM + Waveshare 10.1inch HDMI LCD (E)
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20230818-samsung-dsim-v2-1-846603df0e0a@pengutronix.de
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230818-samsung-dsim-v2-1-846603df0e0a@pengutronix.de

drm: exynos: dsi: Convert to platform remove callback returning void

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().

samsung_dsim_remove() returned 0 unconditionally. Make it return void
instead to convert the two related platform drivers to use
.remove_new().

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Inki Dae <inki.dae@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Link: https://lore.kernel.org/r/20230919103939.1367659-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230919103939.1367659-1-u.kleine-koenig@pengutronix.de

drm/amd/display: Fix mst hub unplug warning

[Why]
Unplug mst hub will cause warning. That's because
dm_helpers_construct_old_payload() is changed to be called after
payload removement from dc link.

In dm_helpers_construct_old_payload(), We refer to the vcpi in
payload allocation table of dc link to construct the old payload
and payload is no longer in the table when we call the function
now.

[How]
Refer to the mst_state to construct the number of time slot for old
payload now. Note that dm_helpers_construct_old_payload() is just
a quick workaround before and we are going to abandon it soon.

Fixes: 5aa1dfcdf0a4 ("drm/mst: Refactor the flow for payload allocation/removement")
Reviewed-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231005080405.169841-1-Wayne.Lin@amd.com

drm/panel: nv3051d: Add Support for Anbernic 351V

Add support for the Anbernic 351V. Just like the 353 series the
underlying vendor is unknown/unmarked (at least not visible in a
non-destructive manner). The panel had slightly different init
sequences and timings in the BSP kernel, but works fine with the
same ones used in the existing driver. The panel will not work without
the inclusion of the MIPI_DSI_CLOCK_NON_CONTINUOUS flag, and this flag
prevents the 353 series from working correctly, so a new compatible
string is added.

Tested colors and timings using modetest and all seem to work identical
to the 353 otherwise.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Link: https://lore.kernel.org/r/20231003163355.143704-3-macroalpha82@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231003163355.143704-3-macroalpha82@gmail.com

dt-bindings: display: newvision,nv3051d: Add Anbernic 351V

Document the Anbernic RG351V panel, which is identical to the panel
used in their 353 series except for in inclusion of an additional DSI
format flag.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20231003163355.143704-2-macroalpha82@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231003163355.143704-2-macroalpha82@gmail.com

drm/dp: switch drm_dp_downstream_*() helpers to struct drm_edid

Prefer struct drm_edid where possible. With limited users for the
drm_dp_downstream_*() helpers, this is fairly straightforward.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231004162149.2802113-1-jani.nikula@intel.com

drm/v3d: Annotate struct v3d_perfmon with __counted_by

Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).

As found with Coccinelle[1], add __counted_by for struct v3d_perfmon.

[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci

Cc: Emma Anholt <emma@anholt.net>
Cc: Melissa Wen <mwen@igalia.com>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230922173216.3823169-9-keescook@chromium.org

drm/vmwgfx: Annotate struct vmw_surface_dirty with __counted_by

Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).

As found with Coccinelle[1], add __counted_by for struct vmw_surface_dirty.

[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci

Cc: Zack Rusin <zackr@vmware.com>
Cc: VMware Graphics Reviewers <linux-graphics-maintainer@vmware.com>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230922173216.3823169-8-keescook@chromium.org

drm/virtio: Annotate struct virtio_gpu_object_array with __counted_by

Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).

As found with Coccinelle[1], add __counted_by for struct virtio_gpu_object_array.

[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci

Cc: David Airlie <airlied@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Gurchetan Singh <gurchetansingh@chromium.org>
Cc: Chia-I Wu <olvaffe@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Cc: virtualization@lists.linux-foundation.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230922173216.3823169-7-keescook@chromium.org

drm/vc4: Annotate struct vc4_perfmon with __counted_by

Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).

As found with Coccinelle[1], add __counted_by for struct vc4_perfmon.

[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci

Cc: Emma Anholt <emma@anholt.net>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230922173216.3823169-6-keescook@chromium.org

drm/nouveau/pm: Annotate struct nvkm_perfdom with __counted_by

Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).

As found with Coccinelle[1], add __counted_by for struct nvkm_perfdom.

[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci

Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Karol Herbst <kherbst@redhat.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230922173216.3823169-5-keescook@chromium.org

drm/msm/dpu: Annotate struct dpu_hw_intr with __counted_by

Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).

As found with Coccinelle[1], add __counted_by for struct dpu_hw_intr.

[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci

Cc: Rob Clark <robdclark@gmail.com>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Sean Paul <sean@poorly.run>
Cc: Marijn Suijten <marijn.suijten@somainline.org>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Bjorn Andersson <andersson@kernel.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: freedreno@lists.freedesktop.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230922173216.3823169-4-keescook@chromium.org

drm/i915/selftests: Annotate struct perf_series with __counted_by

Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).

As found with Coccinelle[1], add __counted_by for struct perf_series.

[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: John Harrison <john.c.harrison@Intel.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230922173216.3823169-3-keescook@chromium.org

drm/amdgpu/discovery: Annotate struct ip_hw_instance with __counted_by

Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).

As found with Coccinelle[1], add __counted_by for struct ip_hw_instance.

[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci

Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230922173216.3823169-2-keescook@chromium.org

drm/amd/pm: Annotate struct smu10_voltage_dependency_table with __counted_by

Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).

As found with Coccinelle[1], add __counted_by for struct smu10_voltage_dependency_table.

[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci

Cc: Evan Quan <evan.quan@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Xiaojian Du <Xiaojian.Du@amd.com>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Kevin Wang <kevin1.wang@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230922173216.3823169-1-keescook@chromium.org

drm/panfrost: Implement generic DRM object RSS reporting function

BO's RSS is updated every time new pages are allocated on demand and mapped
for the object at GPU page fault's IRQ handler, but only for heap buffers.
The reason this is unnecessary for non-heap buffers is that they are mapped
onto the GPU's VA space and backed by physical memory in their entirety at
BO creation time.

This calculation is unnecessary for imported PRIME objects, since heap
buffers cannot be exported by our driver, and the actual BO RSS size is the
one reported in its attached dmabuf structure.

Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230929181616.2769345-6-adrian.larumbe@collabora.com

drm/drm_file: Add DRM obj's RSS reporting function for fdinfo

Some BO's might be mapped onto physical memory chunkwise and on demand,
like Panfrost's tiler heap. In this case, even though the
drm_gem_shmem_object page array might already be allocated, only a very
small fraction of the BO is currently backed by system memory, but
drm_show_memory_stats will then proceed to add its entire virtual size to
the file's total resident size regardless.

This led to very unrealistic RSS sizes being reckoned for Panfrost, where
said tiler heap buffer is initially allocated with a virtual size of 128
MiB, but only a small part of it will eventually be backed by system memory
after successive GPU page faults.

Provide a new DRM object generic function that would allow drivers to
return a more accurate RSS and purgeable sizes for their BOs.

Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230929181616.2769345-5-adrian.larumbe@collabora.com

drm/panfrost: Add fdinfo support for memory stats

A new DRM GEM object function is added so that drm_show_memory_stats can
provide more accurate memory usage numbers.

Ideally, in panfrost_gem_status, the BO's purgeable flag would be checked
after locking the driver's shrinker mutex, but drm_show_memory_stats takes
over the drm file's object handle database spinlock, so there's potential
for a race condition here.

Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230929181616.2769345-4-adrian.larumbe@collabora.com

drm/panfrost: Add fdinfo support GPU load metrics

The drm-stats fdinfo tags made available to user space are drm-engine,
drm-cycles, drm-max-freq and drm-curfreq, one per job slot.

This deviates from standard practice in other DRM drivers, where a single
set of key:value pairs is provided for the whole render engine. However,
Panfrost has separate queues for fragment and vertex/tiler jobs, so a
decision was made to calculate bus cycles and workload times separately.

Maximum operating frequency is calculated at devfreq initialisation time.
Current frequency is made available to user space because nvtop uses it
when performing engine usage calculations.

It is important to bear in mind that both GPU cycle and kernel time numbers
provided are at best rough estimations, and always reported in excess from
the actual figure because of two reasons:
- Excess time because of the delay between the end of a job processing,
the subsequent job IRQ and the actual time of the sample.
- Time spent in the engine queue waiting for the GPU to pick up the next
job.

To avoid race conditions during enablement/disabling, a reference counting
mechanism was introduced, and a job flag that tells us whether a given job
increased the refcount. This is necessary, because user space can toggle
cycle counting through a debugfs file, and a given job might have been in
flight by the time cycle counting was disabled.

The main goal of the debugfs cycle counter knob is letting tools like nvtop
or IGT's gputop switch it at any time, to avoid power waste in case no
engine usage measuring is necessary.

Also add a documentation file explaining the possible values for fdinfo's
engine keystrings and Panfrost-specific drm-curfreq-<keystr> pairs.

Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230929181616.2769345-3-adrian.larumbe@collabora.com

drm/panfrost: Add cycle count GPU register definitions

These GPU registers will be used when programming the cycle counter, which
we need for providing accurate fdinfo drm-cycles values to user space.

Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230929181616.2769345-2-adrian.larumbe@collabora.com

Merge tag 'drm-intel-next-2023-09-29' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

drm/i915 feature pull for v6.7:

Features and functionality:
- Early Xe2 LPD / Lunarlake (LNL) display enabling (Lucas, Matt, Gustavo,
Stanislav, Luca, Clint, Juha-Pekka, Balasubramani, Ravi)
- Plenty of various DSC improvements and fixes (Ankit)
- Add DSC PPS state readout and verification (Suraj)
- Improve fastsets for VRR, LRR and M/N updates (Ville)
- Use connector->ddc to create (non-DP MST) connector sysfs ddc symlinks (Ville)
- Various DSB improvements, load LUTs using DSB (Ville)
- Improve shared link bandwidth management, starting with FDI (Imre)
- Optimize get param ioctl for PXP status (Alan)
- Remove DG2 pre-production hardware workarounds (Matt)
- Add more RPL P/U PCI IDs (Dnyaneshwar)
- Add new DG2-G12 stepping (Swati)
- Add PSR sink error status to debugfs (Jouni)
- Add DP enhanced framing to crtc state checker (Ville)

Refactoring and cleanups:
- Simplify TileY/Tile4 tiling selftest enumeration (Matt)
- Remove some unused power domain code (Gustavo)
- Check stepping of display IP version rather than MTL platform (Matt)
- DP audio compute config cleanups (Vinod)
- SDVO cleanups and refactoring, more robust failure handling (Ville)
- Color register definition and readout cleanups (Jani)
- Reduce header interdependencies for frontbuffer tracking (Jani)
- Continue replacing struct edid with struct drm_edid (Jani)
- Use source physical address instead of EDID for CEC (Jani)
- Clean up Type-C port lane count functions (Luca)
- Clean up DSC PPS register definitions and readout (Jani)
- Stop using GEM_BUG_ON()/GEM_WARN_ON() in display code (Jani)
- Move more of the display probe to display code (Jani)
- Remove redundant runtime suspended state flag (Jouni)
- Move display info printing to display code (Balasubramani)
- Frontbuffer tracking improvements (Jouni)
- Add trailing newlines to debug logging (Jim Cromie)
- Separate display workarounds from clock gating init (Matt)
- Reduce dmesg log spamming for combo PHY, PLL state, FEC, DP MST (Ville, Imre)

Fixes:
- Fix hotplug poll detect loops via suspend/resume (Imre)
- Fix hotplug detect for forced connectors (Imre)
- Fix DSC first_line_bpg_offset calculation (Suraj)
- Fix debug prints for SDP CRC16 (Arun)
- Fix PXP runtime resume (Alan)
- Fix cx0 PHY lane handling (Gustavo)
- Fix frontbuffer tracking locking in debugfs (Juha-Pekka)
- Fix SDVO detect on some models (Ville)
- Fix SDP split configuration for DP MST (Vinod)
- Fix AUX usage and reads for HDCP on DP MST (Suraj)
- Fix PSR workaround (Jouni)
- Fix redundant AUX power get/put in DP force (Imre)
- Fix ICL DSI TCLK POST by letting hardware handle it (William)
- Fix IRQ reset for XE LP+ (Gustavo)
- Fix h/vsync_end instead of h/vtotal in VBT (Ville)
- Fix C20 PHY msgbus timeout issues (Gustavo)
- Fix pre-TGL FEC pipe A vs. DDI A mixup (Ville)
- Fix FEC state readout for DP MST (Ville)

DRM subsystem core changes:
- Assume sink supports 8 bpc when DSC is supported (Ankit)
- Add drm_edid_is_digital() helper (Jani)
- Parse source physical address from EDID (Jani)
- Add function to attach CEC without EDID (Jani)
- Reorder connector sysfs/debugfs remove (Ville)
- Register connector sysfs ddc symlink later (Ville)

Media subsystem changes:
- Add comments about CEC source physical address usage (Jani)

Merges:
- Backmerge drm-next to get v6.6-rc1 (Jani)

Signed-off-by: Dave Airlie <airlied@redhat.com>
# Conflicts:
# drivers/gpu/drm/i915/i915_drv.h
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87r0mhi7a6.fsf@intel.com

drm/vblank: Warn when silently cancelling vblank works

Silently cancelling vblank works is a bit rude, especially
if said works do any resource management (eg. free memory).
WARN if we ever hit this.

TODO: Maybe drm_crtc_vblank_off() should wait for any
pending work to reach its target vblank before actually
doing anything drastic?

Cc: Lyude Paul <lyude@redhat.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230920140339.28322-2-ville.syrjala@linux.intel.com
Reviewed-by: Lyude Paul <lyude@redhat.com>

Merge tag 'drm-intel-gt-next-2023-09-28' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

Driver Changes:

Fixes/improvements/new stuff:

- Fix TLB-Invalidation seqno store [mtl] (Alan Previn)
- Force a reset on internal GuC error [guc] (John Harrison)
- Define GSC fw [gsc] (Daniele Ceraolo Spurio)
- Update workaround 14016712196 [dg2/mtl] (Tejas Upadhyay)
- Mark requests for GuC virtual engines to avoid use-after-free (Andrzej Hajda)
- Add Wa_14015150844 [dg2/mtl] (Shekhar Chauhan)
- Prevent error pointer dereference (Dan Carpenter)
- Add Wa_18022495364 [tgl,adl,rpl] (Dnyaneshwar Bhadane)
- Fix GuC PMU by moving execlist stats initialization to execlist specific setup (Umesh Nerlige Ramappa)
- Fix PXP firmware load [pxp/mtl] (Alan Previn)
- Fix execution/context state of PXP contexts (Alan Previn)
- Limit the length of an sg list to the requested length (Matthew Wilcox)
- Fix reservation address in ggtt_reserve_guc_top [guc] (Javier Pello)
- Add Wa_18028616096 [dg2] (Shekhar Chauhan)
- Get runtime pm in busyness worker only if already active [guc/pmu] (Umesh Nerlige Ramappa)
- Don't set PIPE_CONTROL_FLUSH_L3 for aux inval (Nirmoy Das)

Future platform enablement:

- Fix and consolidate some workaround checks, make others IP version based [mtl] (Matt Roper)
- Replace Meteorlake subplatforms with IP version checks (Matt Roper)
- Adding DeviceID for Arrowlake-S under MTL [mtl] (Nemesa Garg)
- Run relevant bits of debugfs drop_caches per GT (Tvrtko Ursulin)

Miscellaneous:

- Remove Wa_15010599737 [dg2] (Shekhar Chauhan)
- Align igt_spinner_create_request with hangcheck [selftests] (Jonathan Cavitt)
- Remove pre-production workarounds [dg2] (Matt Roper)
- Tidy some workaround definitions (Matt Roper)
- Wait longer for tasks in migrate selftest [gt] (Jonathan Cavitt)
- Skip WA verification for GEN7_MISCCPCTL on DG2 [gt] (Andrzej Hajda)
- Silence injected failure in the load via GSC path [huc] (Daniele Ceraolo Spurio)
- Refactor deprecated strncpy (Justin Stitt)
- Update RC6 mask for mtl_drpc [debugfs/mtl] (Badal Nilawar)
- Remove a static inline that requires including i915_drv.h [gt] (Jani Nikula)
- Remove inlines from i915_gem_execbuffer.c [gem] (Jani Nikula)
- Remove gtt_offset from stream->oa_buffer.head/.tail [perf] (Ashutosh Dixit)
- Do not disable preemption for resets (Tvrtko Ursulin)

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZRVzL02VFuwIkcGl@tursulin-desk