wifi: mt76: mt7996: switch to single multi-radio wiphy

Use generic mt76 chanctx functions and look up phy from vif link.
The driver now uses only a single phy to handle multiple interfaces on
different channels. This is preparation for full MLO support.

Link: https://patch.msgid.link/20250102163508.52945-23-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>

wifi: mt76: mt7996: move all debugfs files to the primary phy

Preparation for single-wiphy support

Link: https://patch.msgid.link/20250102163508.52945-22-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>

wifi: mt76: connac: rework connac helpers

Rework connac helpers related to rate and phymode.
This is a preliminary patch to add MLO support for mt7996 chipsets.

Co-developed-by: Bo Jiao <Bo.Jiao@mediatek.com>
Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Link: https://patch.msgid.link/20250102163508.52945-21-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>

wifi: mt76: mt7996: prepare mt7996_mcu_update_bss_color for MLO support

Pass in struct mt76_vif_link in order to update the correct link.

Link: https://patch.msgid.link/20250102163508.52945-20-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>

wifi: mt76: connac: prepare mt76_connac_mcu_sta_basic_tlv for MLO support

Pass in struct ieee80211_bss_conf in order to use link specific data.

Link: https://patch.msgid.link/20250102163508.52945-19-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>

wifi: mt76: mt7996: prepare mt7996_mcu_set_timing for MLO support

Pass in struct ieee80211_bss_conf in order to use link specific data.

Link: https://patch.msgid.link/20250102163508.52945-18-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>

wifi: mt76: mt7996: prepare mt7996_mcu_set_tx for MLO support

Pass in struct ieee80211_bss_conf in order to use link specific data.

Link: https://patch.msgid.link/20250102163508.52945-17-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>

wifi: mt76: mt7996: prepare mt7996_mcu_add_beacon for MLO support

Pass in struct ieee80211_bss_conf.

Link: https://patch.msgid.link/20250102163508.52945-16-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>

wifi: mt76: mt7996: prepare mt7996_mcu_add_dev/bss_info for MLO support

Add extra arguments for struct ieee80211_bss_conf and mt76_vif_link.

Link: https://patch.msgid.link/20250102163508.52945-15-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>

wifi: mt76: mt7996: pass wcid to mt7996_mcu_sta_hdr_trans_tlv

Preparation for MLO support.

Link: https://patch.msgid.link/20250102163508.52945-14-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>

wifi: mt76: mt7996: use emulated hardware scan support

Preparation for supporting multiple radios on a single wiphy

Link: https://patch.msgid.link/20250102163508.52945-13-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>

wifi: mt76: add multi-radio remain_on_channel functions

This allows a driver using the generic channel context functions to
temporarily switch to another channel for off-channel rx/tx.

Link: https://patch.msgid.link/20250102163508.52945-12-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>

wifi: mt76: add multi-radio support to scanning code

When scanning on a phy/vif combination that does not have an active link,
create a temporary link in order to ensure that we have a valid wcid.

Link: https://patch.msgid.link/20250102163508.52945-11-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>

wifi: mt76: add multi-radio support to tx scheduling

Look up the phy for each scheduled txq. Only run one scheduling loop per hw.

Link: https://patch.msgid.link/20250102163508.52945-10-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>

wifi: mt76: add multi-radio support to a few core hw ops

Iterate over all phys if multi-radio is supported by the driver

Link: https://patch.msgid.link/20250102163508.52945-9-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>

wifi: mt76: remove dev->wcid_phy_mask

Explicitly check wcid->phy_idx instead. Reduces allocated data size.

Link: https://patch.msgid.link/20250102163508.52945-8-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>

wifi: mt76: add chanctx functions for multi-channel phy support

This adds an implementation for the chanctx functions, which can be used
by multi-channel capable drivers. Preparation for adding MLO support.

Link: https://patch.msgid.link/20250102163508.52945-7-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>

wifi: mt76: initialize more wcid fields mt76_wcid_init

Reduces code duplication and ensures that the phy index is always set.

Link: https://patch.msgid.link/20250102163508.52945-6-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>

wifi: mt76: mt7996: split link specific data from struct mt7996_vif

Preparation for MLO support.

Link: https://patch.msgid.link/20250102163508.52945-5-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>

wifi: mt76: add vif link specific data structure

Preparation for splitting link data from vif data for MLO support.

Link: https://patch.msgid.link/20250102163508.52945-4-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>

wifi: mt76: rename struct mt76_vif to mt76_vif_link

Preparation to use it for private bss link data instead of the full vif
on MLO capable devices.

Link: https://patch.msgid.link/20250102163508.52945-3-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>

wifi: mt76: add support for allocating a phy without hw

Preparation for supporting a single hw with multiple radios

Link: https://patch.msgid.link/20250102163508.52945-2-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>

wifi: mt76: add code for emulating hardware scanning

Preparation for supporting multiple radios on a single wiphy on devices
where firmware does not support actual hardware scanning.
This is also a prerequisite for full MLO support

Co-developed-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Co-developed-by: Michael-CY Lee <michael-cy.lee@mediatek.com>
Signed-off-by: Michael-CY Lee <michael-cy.lee@mediatek.com>
Co-developed-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Link: https://patch.msgid.link/20250102163508.52945-1-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>

wifi: mt76: do not add wcid entries to sta poll list during MCU reset

Fixes linked list management issues during restart, where sta entries
can be recreated and reinitialized while still in the poll list, triggering
kernel warnings.

Link: https://patch.msgid.link/20241230194202.95065-14-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>

wifi: mt76: mt7996: use mac80211 .sta_state op

Allows adding stations before assoc, though they are not passed to the
firmware yet at that point.

Link: https://patch.msgid.link/20241230194202.95065-13-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>

wifi: mt76: mt7915: fix omac index assignment after hardware reset

Reset per-phy mac address slot mask in order to avoid leaking entries.

Fixes: 8a55712d124f ("wifi: mt76: mt7915: enable full system reset support")
Link: https://patch.msgid.link/20241230194202.95065-12-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>

wifi: mt76: mt7915: firmware restart on devices with a second pcie link

It seems that the firmware checks the register used for detecting matching
PCIe links in order to figure out if a secondary PCIe link is enabled.
Write the register again just before starting the firmware on hw reset,
in order to fix an issue that left the second band unusable after restart.

Fixes: 9093cfff72e3 ("mt76: mt7915: add support for using a secondary PCIe link for gen1")
Link: https://patch.msgid.link/20241230194202.95065-11-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>

wifi: mt76: mt7915: hold dev->mutex while interacting with the thermal state

Avoid issuing MCU calls during a hardware restart

Link: https://patch.msgid.link/20241230194202.95065-10-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>

wifi: mt76: mt7915: ensure that only one sta entry is active per mac address

When a client is roaming to a different AP interface, a duplicate wtbl entry
can be created. This can lead to lost packets or aggregation issues until
the old entry expires.
In order to fix this issue, delete any conflicting entries from WTBL
whenever a station is authorized.

Link: https://patch.msgid.link/20241230194202.95065-9-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>

wifi: mt76: only enable tx worker after setting the channel

Avoids sending packets too early

Fixes: 0b3be9d1d34e ("wifi: mt76: add separate tx scheduling queue for off-channel tx")
Link: https://patch.msgid.link/20241230194202.95065-8-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>

wifi: mt76: mt7915: decrease timeout for commonly issued MCU commands

This allows faster recovery from firmware issues

Link: https://patch.msgid.link/20241230194202.95065-7-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>

wifi: mt76: mt7915: reduce the number of command retries

The need to retry a command is really uncommon. Reduce the retries to 1 to
speed up recovery from firmware issues.

Link: https://patch.msgid.link/20241230194202.95065-6-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>

wifi: mt76: mt7996: fix rx filter setting for bfee functionality

Fix rx filter setting to prevent dropping NDPA frames. Without this
change, bfee functionality may behave abnormally.

Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices")
Link: https://patch.msgid.link/20241230194202.95065-5-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>

wifi: mt76: mt7915: fix eifs value on older chipsets

Use the default firmware values

Link: https://patch.msgid.link/20241230194202.95065-4-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>

wifi: mt76: mt7915: fix slot time for 5/6GHz

It should only be set to 20 for long slot time on 2.4 GHz

Link: https://patch.msgid.link/20241230194202.95065-3-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>

wifi: mt76: mt7996: remove phy->monitor_vif

It is unused

Link: https://patch.msgid.link/20241230194202.95065-2-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>

wifi: mt76: remove mt76_calculate_default_rate()

It is only used in mt76_connac2_mac_tx_rate_val, inline it there.

Link: https://patch.msgid.link/20241230194202.95065-1-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>

wifi: mt76: mt7921u: Add VID/PID for TP-Link TXE50UH

Add VID/PID 35bc/0107 for recently released TP-Link TXE50UH USB WiFi adapter.

Tested-by: Shang Chieh Tseng <shangchieh.tseng@tsengsy.com>
Signed-off-by: Nick Morrow <usbwifi2024@gmail.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/e797f105-9ca8-41e9-96de-7d25dec09943@gmail.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>

wifi: mt76: mt7925: replace zero-length array with flexible-array member

The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1],
introduced in C99:

struct foo {
int stuff;
struct boo array[];
};

By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last, which is beneficial
to cultivate a high-quality code.[2]

This issue was found with the help of Coccinelle.

[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour")

Signed-off-by: Zhang Kunbo <zhangkunbo@huawei.com>
Link: https://patch.msgid.link/20241218074552.3271542-1-zhangkunbo@huawei.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>

wifi: mt76: mt7921: add rfkill_poll for hardware rfkill

Add mac80211 rfkill_poll ops to monitor hardware rfkill state
and state change will be updated.

Signed-off-by: Allan Wang <allan.wang@mediatek.com>
Link: https://patch.msgid.link/20241209070922.28106-1-allan.wang@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>

wifi: mt76: mt7921: introduce CSA support

Add CSA (Channel Switch Announcement) related implementation
in collaboration with mac80211 to deal with dynamic channel
switching.

Signed-off-by: Leon Yen <leon.yen@mediatek.com>
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Link: https://patch.msgid.link/20241107061440.6545-1-mingyen.hsieh@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>

wifi: mt76: mt7925: config the dwell time by firmware

To optimize the scan time of mt7925, remove the dwell time
setting for the scan command and let it be controlled by
the firmware as mt7921.

Signed-off-by: Michael Lo <michael.lo@mediatek.com>
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Link: https://patch.msgid.link/20241106013221.18101-1-mingyen.hsieh@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>

wifi: mt76: do not hold queue lock during initial rx buffer alloc

In dma init or reset scene, full buffer is needed for all rx rings. Since
this is very time consuming, split the function to perform initial
allocation without holding the spinlock. This avoids causing excessive
scheduler latency.

Signed-off-by: Quan Zhou <quan.zhou@mediatek.com>
Reviewed-by: Shayne Chen <shayne.chen@mediatek.com>
Reviewed-by: Deren Wu <deren.wu@mediatek.com>
Link: https://patch.msgid.link/57c68a7ce1dd9022fa5e06af2c53d6313f30ec83.1731069062.git.quan.zhou@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>

wifi: mt76: mt7925: Properly handle responses for commands with events

Properly retrieve the response for commands with events. Ensure accurate
handling of event-driven commands.

Fixes: 86c051f2c418 ("wifi: mt76: mt7925: enabling MLO when the firmware supports it")
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Link: https://patch.msgid.link/20241211011926.5002-17-sean.wang@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>

wifi: mt76: mt7925: Cleanup MLO settings post-disconnection

Clean up MLO settings after disconnection.

Fixes: 86c051f2c418 ("wifi: mt76: mt7925: enabling MLO when the firmware supports it")
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Link: https://patch.msgid.link/20241211011926.5002-16-sean.wang@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>

wifi: mt76: mt7925: Update mt7925_mcu_uni_[tx,rx]_ba for MLO

Update mt7925_mcu_uni_[tx,rx]_ba for MLO support in firmware.

Fixes: 86c051f2c418 ("wifi: mt76: mt7925: enabling MLO when the firmware supports it")
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Link: https://patch.msgid.link/20241211011926.5002-15-sean.wang@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>

wifi: mt76: mt7925: Init secondary link PM state

Initialize secondary link PM state.

Fixes: 86c051f2c418 ("wifi: mt76: mt7925: enabling MLO when the firmware supports it")
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Link: https://patch.msgid.link/20241211011926.5002-14-sean.wang@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>

wifi: mt76: mt7925: Update secondary link PS flow

Update the power-saving flow for secondary links.

Fixes: 86c051f2c418 ("wifi: mt76: mt7925: enabling MLO when the firmware supports it")
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Link: https://patch.msgid.link/20241211011926.5002-13-sean.wang@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>

wifi: mt76: mt7925: Update mt7925_unassign_vif_chanctx for per-link BSS

Update mt7925_unassign_vif_chanctx to support per-link BSS.

Fixes: 86c051f2c418 ("wifi: mt76: mt7925: enabling MLO when the firmware supports it")
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Link: https://patch.msgid.link/20241211011926.5002-12-sean.wang@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>

wifi: mt76: mt7925: Update mt792x_rx_get_wcid for per-link STA

Update mt792x_rx_get_wcid to support per-link STA.

Fixes: 86c051f2c418 ("wifi: mt76: mt7925: enabling MLO when the firmware supports it")
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Link: https://patch.msgid.link/20241211011926.5002-11-sean.wang@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>

wifi: mt76: mt7925: Update mt7925_mcu_sta_update for BC in ASSOC state

Update mt7925_mcu_sta_update for broadcast (BC) in the ASSOC state.

Fixes: 86c051f2c418 ("wifi: mt76: mt7925: enabling MLO when the firmware supports it")
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Link: https://patch.msgid.link/20241211011926.5002-10-sean.wang@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>

wifi: mt76: Enhance mt7925_mac_link_sta_add to support MLO

Enhance mt7925_mac_link_sta_add to support MLO.

Fixes: 86c051f2c418 ("wifi: mt76: mt7925: enabling MLO when the firmware supports it")
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Link: https://patch.msgid.link/20241211011926.5002-9-sean.wang@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>

wifi: mt76: mt7925: Enhance mt7925_mac_link_bss_add to support MLO

In mt7925_mac_link_bss_add(), the mt76_connac_mcu_uni_add_dev() function
must be executed only after all parameters have been properly initialized.

Fixes: 86c051f2c418 ("wifi: mt76: mt7925: enabling MLO when the firmware supports it")
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Link: https://patch.msgid.link/20241211011926.5002-8-sean.wang@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>

wifi: mt76: mt7925: Fix CNM Timeout with Single Active Link in MLO

Fix CNM command timeout issue when only a single active link is available
during MLO connection to fix the following kernel log error.

[  741.931030] wlan0: [link 1] local address be:90:e0:22:c4:22, AP link address 08:0c:43:7a:19:2a
[  741.931042] wlan0: [link 1] determined AP 08:0c:43:7a:19:2a to be EHT
[  741.931052] wlan0: [link 1] connecting with EHT mode, max bandwidth 160 MHz
[  741.931071] wlan0: WMM AC=0 acm=0 aifs=2 cWmin=3 cWmax=7 txop=47 uapsd=0, downgraded=0
[  741.931076] wlan0: WMM AC=1 acm=0 aifs=2 cWmin=7 cWmax=15 txop=94 uapsd=0, downgraded=0
[  741.931080] wlan0: WMM AC=2 acm=0 aifs=3 cWmin=15 cWmax=1023 txop=0 uapsd=0, downgraded=0
[  741.931085] wlan0: WMM AC=3 acm=0 aifs=7 cWmin=15 cWmax=1023 txop=0 uapsd=0, downgraded=0
[  741.931095] wlan0: moving STA 22:0c:43:7a:19:2a to state 3
[  749.090928] mt7925e 0000:2b:00.0: Message 00020002 (seq 15) timeout
[  752.162972] mt7925e 0000:2b:00.0: Message 00020003 (seq 1) timeout
[  755.234975] mt7925e 0000:2b:00.0: Message 00020002 (seq 2) timeout
[  758.306971] mt7925e 0000:2b:00.0: Message 00020004 (seq 3) timeout

Fixes: 86c051f2c418 ("wifi: mt76: mt7925: enabling MLO when the firmware supports it")
Signed-off-by: Leon Yen <leon.yen@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Link: https://patch.msgid.link/20241211011926.5002-7-sean.wang@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>

wifi: mt76: mt7925: fix wrong parameter for related cmd of chan info

Fix incorrect parameters for the related channel information command.

Fixes: 86c051f2c418 ("wifi: mt76: mt7925: enabling MLO when the firmware supports it")
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Link: https://patch.msgid.link/20241211011926.5002-6-sean.wang@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>

wifi: mt76: mt7925: Fix incorrect WCID phy_idx assignment

Fix incorrect WCID phy_idx assignment.

Fixes: 86c051f2c418 ("wifi: mt76: mt7925: enabling MLO when the firmware supports it")
Signed-off-by: allan.wang <allan.wang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Link: https://patch.msgid.link/20241211011926.5002-5-sean.wang@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>

wifi: mt76: mt7925: Fix incorrect WCID assignment for MLO

For MLO, each link must have a corresponding WCID.

Fixes: 86c051f2c418 ("wifi: mt76: mt7925: enabling MLO when the firmware supports it")
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Link: https://patch.msgid.link/20241211011926.5002-3-sean.wang@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>

wifi: mt76: mt7925: Fix incorrect MLD address in bss_mld_tlv for MLO support

For this TLV, the address should be set to the MLD address rather than
the link address.

Fixes: 86c051f2c418 ("wifi: mt76: mt7925: enabling MLO when the firmware supports it")
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Link: https://patch.msgid.link/20241211011926.5002-2-sean.wang@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>

wifi: mt76: connac: Extend mt76_connac_mcu_uni_add_dev for MLO

This commit extends the `mt76_connac_mcu_uni_add_dev` function to include
support for Multi-Link Operation (MLO). Additionally, backward
compatibility for MT7921 is preserved, enabling seamless integration with
existing setups.

Fixes: 86c051f2c418 ("wifi: mt76: mt7925: enabling MLO when the firmware supports it")
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Link: https://patch.msgid.link/20241211011926.5002-1-sean.wang@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>

wifi: mt76: mt7996: exclude tx backoff time from airtime

This helps to make STA airtime counters more accurate.

Signed-off-by: Chad Monroe <chad@monroe.io>
Suggested-by: Ryder Lee <ryder.lee@mediatek.com>
Link: https://patch.msgid.link/88821d8f08e2715927939b35e630a06171962636.1732653612.git.chad@monroe.io
Signed-off-by: Felix Fietkau <nbd@nbd.name>

wifi: mt76: mt7915: exclude tx backoff time from airtime

This helps to make STA airtime counters more accurate.

Signed-off-by: Chad Monroe <chad@monroe.io>
Suggested-by: Ryder Lee <ryder.lee@mediatek.com>
Link: https://patch.msgid.link/026380cec180261956b983cbdb009605867bcd8d.1732596478.git.chad@monroe.io
Signed-off-by: Felix Fietkau <nbd@nbd.name>

wifi: mt76: mt7915: fix overflows seen when writing limit attributes

DIV_ROUND_CLOSEST() after kstrtoul() results in an overflow if a large
number such as 18446744073709551615 is provided by the user.
Fix it by reordering clamp_val() and DIV_ROUND_CLOSEST() operations.
This commit was inspired by commit: 57ee12b6c514.

Fixes: 02ee68b95d81 ("mt76: mt7915: add control knobs for thermal throttling")
Signed-off-by: xueqin Luo <luoxueqin@kylinos.cn>
Link: https://patch.msgid.link/20241202031917.23741-3-luoxueqin@kylinos.cn
Signed-off-by: Felix Fietkau <nbd@nbd.name>

wifi: mt76: mt7996: fix overflows seen when writing limit attributes

DIV_ROUND_CLOSEST() after kstrtoul() results in an overflow if a large
number such as 18446744073709551615 is provided by the user.
Fix it by reordering clamp_val() and DIV_ROUND_CLOSEST() operations.
This commit was inspired by commit: 57ee12b6c514.

Fixes: 6879b2e94172 ("wifi: mt76: mt7996: add thermal sensor device support")
Signed-off-by: xueqin Luo <luoxueqin@kylinos.cn>
Link: https://patch.msgid.link/20241202031917.23741-2-luoxueqin@kylinos.cn
Signed-off-by: Felix Fietkau <nbd@nbd.name>

wifi: mt76: mt7925: fix the invalid ip address for arp offload

The wrong ieee80211_vif will lead to get invalid ip address and
the correct ieee80211_vif can be obtained from ieee80211_bss_conf.

Fixes: 147324292979 ("wifi: mt76: mt7925: add link handling in the BSS_CHANGED_ARP_FILTER handler")
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Link: https://patch.msgid.link/20241107053005.10558-1-mingyen.hsieh@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>

wifi: mt76: mt7925: fix get wrong chip cap from incorrect pointer

Use tlv instead of skb, because using skb will get valid data
with wrong offset.

Fixes: 86c051f2c418 ("wifi: mt76: mt7925: enabling MLO when the firmware supports it")
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Link: https://patch.msgid.link/20241104051447.4286-1-mingyen.hsieh@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>

wifi: mt76: mt7925: fix wrong band_idx setting when enable sniffer mode

Currently, sniffer mode does not support band auto,
so set band_idx to the default 0.

Fixes: 0cb349d742d1 ("wifi: mt76: mt7925: update mt7925_mac_link_bss_add for MLO")
Signed-off-by: Eric-SY Chang <eric-sy.chang@mediatek.com>
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Link: https://patch.msgid.link/20241101074340.26176-1-mingyen.hsieh@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>

wifi: mt76: mt7925: fix NULL deref check in mt7925_change_vif_links

In mt7925_change_vif_links() devm_kzalloc() may return NULL but this
returned value is not checked.

Fixes: 69acd6d910b0 ("wifi: mt76: mt7925: add mt7925_change_vif_links")
Signed-off-by: Charles Han <hanchunchao@inspur.com>
Link: https://patch.msgid.link/20241025075554.181572-1-hanchunchao@inspur.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>

wifi: mt76: introduce mt792x_config_mac_addr_list routine

Add mt792x_config_mac_addr_list routine in order to set
the mac address list supported by the driver. Initialize
wiphy->addresses/n_addresses for mt792x driver

Signed-off-by: Hao Zhang <hao.zhang@mediatek.com>
Signed-off-by: Leon Yen <Leon.Yen@mediatek.com>
Signed-off-by: Allan Wang <allan.wang@mediatek.com>
Link: https://patch.msgid.link/20241016101017.19598-1-allan.wang@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>

wifi: mt76: mt7915: add module param to select 5 GHz or 6 GHz on MT7916

Due to a limitation in available memory, the MT7916 firmware can only
handle either 5 GHz or 6 GHz at a time. It does not support runtime
switching without a full restart.

On older firmware, this accidentally worked to some degree due to missing
checks, but couldn't be supported properly, because it left the 6 GHz
channels uncalibrated.
Newer firmware refuses to start on either band if the passed EEPROM
data indicates support for both.

Deal with this limitation by using a module parameter to specify the
preferred band in case both are supported.

Fixes: b4d093e321bd ("mt76: mt7915: add 6 GHz support")
Cc: stable@vger.kernel.org
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Link: https://patch.msgid.link/20241010083816.51880-1-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>

wifi: mt76: mt7915: Fix an error handling path in mt7915_add_interface()

If mt76_wcid_alloc() fails, the "mt76.mutex" mutex needs to be released as
done in the other error handling paths of mt7915_add_interface().

Fixes: f3049b88b2b3 ("wifi: mt76: mt7915: allocate vif wcid in the same range as stations")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://patch.msgid.link/b9d8fbfc19360bfe60b9cea1cb0f735ab3b4bc26.1727639596.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Felix Fietkau <nbd@nbd.name>

wifi: mt76: mt7921: fix using incorrect group cipher after disconnection.

To avoid incorrect cipher after disconnection, we should
do the key deletion process in this case.

Fixes: e6db67fa871d ("wifi: mt76: ignore key disable commands")
Signed-off-by: Michael Lo <michael.lo@mediatek.com>
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Tested-by: David Ruth <druth@chromium.org>
Reviewed-by: David Ruth <druth@chromium.org>
Link: https://patch.msgid.link/20240801024335.12981-1-mingyen.hsieh@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>

wifi: mt76: mt76u_vendor_request: Do not print error messages when -EPROTO

When initializing the network card, unplugging the device will
trigger an -EPROTO error, resulting in a flood of error messages
being printed frantically.

The exception is printed as follows：

         mt76x2u 2-2.4:1.0: vendor request req:47 off:9018 failed:-71
         mt76x2u 2-2.4:1.0: vendor request req:47 off:9018 failed:-71
         ...

It will continue to print more than 2000 times for about 5 minutes,
causing the usb device to be unable to be disconnected. During this
period, the usb port cannot recognize the new device because the old
device has not disconnected.

There may be other operating methods that cause -EPROTO, but -EPROTO is
a low-level hardware error. It is unwise to repeat vendor requests
expecting to read correct data. It is a better choice to treat -EPROTO
and -ENODEV the same way.

Similar to commit 9b0f100c1970 ("mt76: usb: process URBs with status
EPROTO properly") do no schedule rx_worker for urb marked with status
set  -EPROTO. I also reproduced this situation when plugging and
unplugging the device, and this patch is effective.

Just do not vendor request again for urb marked with status set -EPROTO.

Link: https://lore.kernel.org/all/531681bd-30f5-4a70-a156-bf8754b8e072@intel.com/
Link: https://lore.kernel.org/all/D4B9CC1FFC0CBAC3+20250105040607.154706-1-wangyuli@uniontech.com/
Fixes: b40b15e1521f ("mt76: add usb support to mt76 layer")
Co-developed-by: Xu Rao <raoxu@uniontech.com>
Signed-off-by: Xu Rao <raoxu@uniontech.com>
Signed-off-by: WangYuli <wangyuli@uniontech.com>
Link: https://patch.msgid.link/9DD7DE7AAB497CB7+20250113070241.63590-1-wangyuli@uniontech.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>

wifi: mt76: mt7921: fix a potential scan no APs

In multi-channel scenarios, the granted channel must be aborted before
station remove. Otherwise, the firmware will be put into a wrong state,
resulting in have chance to make subsequence scan no APs.
With this patch, the granted channel will be always aborted before
station remove.

Signed-off-by: Quan Zhou <quan.zhou@mediatek.com>
Reviewed-by: Sean Wang <sean.wang@mediatek.com>
Tested-by: David Ruth <druth@chromium.org>
Reviewed-by: David Ruth <druth@chromium.org>
Link: https://patch.msgid.link/1ac1ae779db86d4012199a24ea2ca74050ed4af6.1721300411.git.quan.zhou@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>

wifi: mt76: Fix EHT NSS radiotap reporting.

Wireshark and iwlwifi use zero-based NSS reporting, adjust
mt76 to do the same.

Signed-off-by: Ben Greear <greearb@candelatech.com>
Link: https://patch.msgid.link/20240909211238.3237111-2-greearb@candelatech.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>

wifi: mt76: mt7996: Add eht radiotap tlv

This duplicates what the 7925 driver is doing, wireshark seems to
at least mostly decode it as expected.

Signed-off-by: Ben Greear <greearb@candelatech.com>
Link: https://patch.msgid.link/20240909211238.3237111-1-greearb@candelatech.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>

wifi: mt76: mt7915: Fix mesh scan on MT7916 DBDC

commit c4f075582304 ("wifi: mt76: mt7915: fix command timeout in AP stop
period") changes the behavior of mt7915_bss_info_changed() in mesh mode
when enable_beacon becomes false: it calls mt7915_mcu_add_bss_info(...,
false) and mt7915_mcu_add_sta(..., false) while the previous code
didn't.  These sends mcu commands that apparently confuse the firmware.

This breaks scanning while in mesh mode on AsiaRF MT7916 DBDC-based cards:
scanning works but no mesh frames get sent afterwards and the firmware
seems to be hosed.  It breaks on MT7916 DBDC but not on MT7915 DBDC.

Fixes: c4f075582304 ("wifi: mt76: mt7915: fix command timeout in AP stop period")
Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
Link: https://patch.msgid.link/20240927085350.4594-1-nicolas.cavallari@green-communications.fr
Signed-off-by: Felix Fietkau <nbd@nbd.name>

wifi: mt76: mt7615: Convert comma to semicolon

To ensure code clarity and prevent potential errors, it's advisable
to employ the ';' as a statement separator, except when ',' are
intentionally used for specific purposes.

Signed-off-by: Shen Lichuan <shenlichuan@vivo.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20240911034243.31596-1-shenlichuan@vivo.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>

wifi: mt76: mt7925: fix off by one in mt7925_load_clc()

This comparison should be >= instead of > to prevent an out of bounds
read and write.

Fixes: 9679ca7326e5 ("wifi: mt76: mt7925: fix a potential array-index-out-of-bounds issue for clc")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/84bf5dd2-2fe3-4410-a7af-ae841e41082a@stanley.mountain
Signed-off-by: Felix Fietkau <nbd@nbd.name>

wifi: mt76: mt7921s: fix a potential firmware freeze during startup

The maximum command quota of the firmware may be exceeded because the
command to retrieve the quota setting has not been taken into account.

This patch considers not only the quota usage of the command retrieving
quota settings but also limits the total quota usage.

Signed-off-by: Leon Yen <leon.yen@mediatek.com>
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Link: https://patch.msgid.link/20240916060157.10157-1-mingyen.hsieh@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>

wifi: mt76: mt792x: add P2P_DEVICE support

Regist the NL80211_IFTYPE_P2P_DEVICE to support p2p device
for mt792x chips

Signed-off-by: Hao Zhang <hao.zhang.mediatek@gmail.com>
Signed-off-by: allan.wang <allan.wang@mediatek.com>
Signed-off-by: Ming Yen Hsieh <MingYen.Hsieh@mediatek.com>
Link: https://patch.msgid.link/20240919081713.23787-1-mingyen.hsieh@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>

wifi: mt76: mt7996: set correct background radar capability

Some of the variants do not support background radar, so add a helper
to report background radar capability.

Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Tested-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/20240926032440.15978-3-shayne.chen@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>

wifi: mt76: mt7996: add support for more variants

Current varaints supported:
- mt7996 chipset: tri-band, 4+4+4 NSS, eFEM
- mt7992 chipset: dual-band, 4+4 NSS, eFEM

This patch adds support for the following variants:
- mt7996 chipset:
  - tri-band, 4+4+4 NSS, iFEM
  - tri-band, 2+3+3 NSS, eFEM
  - tri-band, 2+3+3 NSS, iFEM
- mt7992 chipset:
  - dual-band, 4+4 NSS, iFEM
  - dual-band, 4+4 NSS, with band0 iFEM and band1 eFEM
  - dual-band, 2+3 NSS, eFEM
  - dual-band, 2+3 NSS, iFEM

Co-developed-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com>
Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Tested-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/20240926032440.15978-2-shayne.chen@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>

wifi: mt76: mt7996: extend flexibility of mt7996_mcu_get_eeprom()

Support passing customized buffer pointer and length to
mt7996_mcu_get_eeprom().

This is the preparation for adding more variants support which needs to
prefetch FEM module from efuse, and also fixes potential OOB issue when
reading the last efuse block.

Co-developed-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com>
Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Tested-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/20240926032440.15978-1-shayne.chen@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>

wifi: brcmfmac: Add missing Return: to function documentation

Running 'scripts/kernel-doc -Wall -Werror -none' flagged the following
kernel-doc issues:

drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c:823: warning: No description found for return value of 'brcmf_apsta_add_vif'
drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c:907: warning: No description found for return value of 'brcmf_mon_add_vif'
drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c:7419: warning: No description found for return value of 'brcmf_setup_ifmodes'

Add the missing 'Return:' tags to the kernel-doc of these functions.

Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20250106-brcmfmac-kdoc-v1-1-ed72196e21a1@oss.qualcomm.com

wifi: iwlegacy: Remove unused il_get_single_channel_number()

THe last use of il_get_single_channel_number() was removed in 2011 by
commit dd6d2a8aef69 ("iwlegacy: remove reset rf infrastructure")
when it was still called iwl_legacy_get_single_channel_number.

Remove it.

Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20241226011355.135417-3-linux@treblig.org

wifi: iwlegacy: Remove unused il3945_calc_db_from_ratio()

The last use of il3945_calc_db_from_ratio() was removed in 2010 by
commit ed1b6e99b5e6 ("iwlwifi: remove noise reporting")
when it was still called iwl3945_calc_db_from_ratio().

Remove it.

Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20241226011355.135417-2-linux@treblig.org

wifi: rt2x00: Remove unused rfval values

The intention here is not clear but as this was already tested and matches
vendor driver it's better not to change behavior even if it looks suspicious.
So just remove the unused values.

Coverity-ID: 1525307

Signed-off-by: Ariel Otilibili <ariel.otilibili-anieli@eurecom.fr>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
[kvalo@kernel.org: write commit message]
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20241221124445.1094460-2-ariel.otilibili-anieli@eurecom.fr

wifi: brcmfmac: Check the return value of of_property_read_string_index()

Somewhen between 6.10 and 6.11 the driver started to crash on my
MacBookPro14,3. The property doesn't exist and 'tmp' remains
uninitialized, so we pass a random pointer to devm_kstrdup().

The crash I am getting looks like this:

BUG: unable to handle page fault for address: 00007f033c669379
PF: supervisor read access in kernel mode
PF: error_code(0x0001) - permissions violation
PGD 8000000101341067 P4D 8000000101341067 PUD 101340067 PMD 1013bb067 PTE 800000010aee9025
Oops: Oops: 0001 [#1] SMP PTI
CPU: 4 UID: 0 PID: 827 Comm: (udev-worker) Not tainted 6.11.8-gentoo #1
Hardware name: Apple Inc. MacBookPro14,3/Mac-551B86E5744E2388, BIOS 529.140.2.0.0 06/23/2024
RIP: 0010:strlen+0x4/0x30
Code: f7 75 ec 31 c0 c3 cc cc cc cc 48 89 f8 c3 cc cc cc cc 0f 1f 40 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa <80> 3f 00 74 14 48 89 f8 48 83 c0 01 80 38 00 75 f7 48 29 f8 c3 cc
RSP: 0018:ffffb4aac0683ad8 EFLAGS: 00010202
RAX: 00000000ffffffea RBX: 00007f033c669379 RCX: 0000000000000001
RDX: 0000000000000cc0 RSI: 00007f033c669379 RDI: 00007f033c669379
RBP: 00000000ffffffea R08: 0000000000000000 R09: 00000000c0ba916a
R10: ffffffffffffffff R11: ffffffffb61ea260 R12: ffff91f7815b50c8
R13: 0000000000000cc0 R14: ffff91fafefffe30 R15: ffffb4aac0683b30
FS:  00007f033ccbe8c0(0000) GS:ffff91faeed00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f033c669379 CR3: 0000000107b1e004 CR4: 00000000003706f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <TASK>
 ? __die+0x23/0x70
 ? page_fault_oops+0x149/0x4c0
 ? raw_spin_rq_lock_nested+0xe/0x20
 ? sched_balance_newidle+0x22b/0x3c0
 ? update_load_avg+0x78/0x770
 ? exc_page_fault+0x6f/0x150
 ? asm_exc_page_fault+0x26/0x30
 ? __pfx_pci_conf1_write+0x10/0x10
 ? strlen+0x4/0x30
 devm_kstrdup+0x25/0x70
 brcmf_of_probe+0x273/0x350 [brcmfmac]

Signed-off-by: Stefan Dösinger <stefan@codeweavers.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20250106170958.3595-1-stefan@codeweavers.com

wifi: wlcore: fix unbalanced pm_runtime calls

If firmware boot failes, runtime pm is put too often:
[12092.708099] wlcore: ERROR firmware boot failed despite 3 retries
[12092.708099] wl18xx_driver wl18xx.1.auto: Runtime PM usage count underflow!
Fix that by redirecting all error gotos before runtime_get so that runtime is
not put.

Fixes: c40aad28a3cf ("wlcore: Make sure firmware is initialized in wl1271_op_add_interface()")
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Reviewed-by: Michael Nemanov <michael.nemanov@ti.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20250104195507.402673-1-akemnade@kernel.org

wifi: wilc1000: unregister wiphy only if it has been registered

There is a specific error path in probe functions in wilc drivers (both
sdio and spi) which can lead to kernel panic, as this one for example
when using SPI:

Unable to handle kernel paging request at virtual address 9f000000 when read
[9f000000] *pgd=00000000
Internal error: Oops: 5 [#1] ARM
Modules linked in: wilc1000_spi(+) crc_itu_t crc7 wilc1000 cfg80211 bluetooth ecdh_generic ecc
CPU: 0 UID: 0 PID: 106 Comm: modprobe Not tainted 6.13.0-rc3+ #22
Hardware name: Atmel SAMA5
PC is at wiphy_unregister+0x244/0xc40 [cfg80211]
LR is at wiphy_unregister+0x1c0/0xc40 [cfg80211]
[...]
 wiphy_unregister [cfg80211] from wilc_netdev_cleanup+0x380/0x494 [wilc1000]
 wilc_netdev_cleanup [wilc1000] from wilc_bus_probe+0x360/0x834 [wilc1000_spi]
 wilc_bus_probe [wilc1000_spi] from spi_probe+0x15c/0x1d4
 spi_probe from really_probe+0x270/0xb2c
 really_probe from __driver_probe_device+0x1dc/0x4e8
 __driver_probe_device from driver_probe_device+0x5c/0x140
 driver_probe_device from __driver_attach+0x220/0x540
 __driver_attach from bus_for_each_dev+0x13c/0x1a8
 bus_for_each_dev from bus_add_driver+0x2a0/0x6a4
 bus_add_driver from driver_register+0x27c/0x51c
 driver_register from do_one_initcall+0xf8/0x564
 do_one_initcall from do_init_module+0x2e4/0x82c
 do_init_module from load_module+0x59a0/0x70c4
 load_module from init_module_from_file+0x100/0x148
 init_module_from_file from sys_finit_module+0x2fc/0x924
 sys_finit_module from ret_fast_syscall+0x0/0x1c

The issue can easily be reproduced, for example by not wiring correctly
a wilc device through SPI (and so, make it unresponsive to early SPI
commands). It is due to a recent change decoupling wiphy allocation from
wiphy registration, however wilc_netdev_cleanup has not been updated
accordingly, letting it possibly call wiphy unregister on a wiphy which
has never been registered.

Fix this crash by moving wiphy_unregister/wiphy_free out of
wilc_netdev_cleanup, and by adjusting error paths in both drivers

Fixes: fbdf0c5248dc ("wifi: wilc1000: Register wiphy after reading out chipid")
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20241223-wilc_fix_probe_error_path-v1-1-91fa7bd8e5b6@bootlin.com

wifi: mt76: mt7996: fix invalid interface combinations

Setting beacon_int_min_gcd and NL80211_IFTYPE_ADHOC in the same interface
combination is invalid, which will trigger the following warning trace
and get error returned from wiphy_register().

[   10.080325] Call trace:
[   10.082761]  wiphy_register+0xc4/0x76c [cfg80211]
[   10.087465]  ieee80211_register_hw+0x800/0xac4 [mac80211]
[   10.092868]  mt76_register_device+0x16c/0x2c0 [mt76]
[   10.097829]  mt7996_register_device+0x740/0x844 [mt7996e]

Fix this by removing unused adhoc iftype.

Fixes: 948f65249868 ("wifi: mt76: mt7996: advertize beacon_int_min_gcd")
Reported-by: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Tested-By: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20241007135133.5336-1-shayne.chen@mediatek.com

Merge tag 'ipsec-next-2025-01-09' of git://git./linux/kernel/git/klassert/ipsec-next

Steffen Klassert says:

====================
ipsec-next-2025-01-09

1) Implement the AGGFRAG protocol and basic IP-TFS (RFC9347) functionality.
   From Christian Hopps.

2) Support ESN context update to hardware for TX.
   From Jianbo Liu.

Please pull or let me know if there are problems.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: qca8k: Use of_property_present() for non-boolean properties

The use of of_property_read_bool() for non-boolean properties is
deprecated in favor of of_property_present() when testing for property
presence.

Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: phy: micrel: use helper phy_disable_eee

Use helper phy_disable_eee() instead of setting phylib-internal bitmap
eee_broken_modes directly.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/5e19eebe-121e-4a41-b36d-a35631279dd8@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'netconsole-selftest-for-userdata-overflow'

Breno Leitao says:

====================
netconsole: selftest for userdata overflow

Implement comprehensive testing for netconsole userdata entry handling,
demonstrating correct behavior when creating maximum entries and
preventing unauthorized overflow.

Refactor existing test infrastructure to support modular, reusable
helper functions that validate strict entry limit enforcement.

Also, add a warning if update_userdata() sees more than
MAX_USERDATA_ITEMS entries. This shouldn't happen and it is a bug that
shouldn't be silently ignored.

v2: https://lore.kernel.org/20250103-netcons_overflow_test-v2-0-a49f9be64c21@debian.org
v1: https://lore.kernel.org/20241204-netcons_overflow_test-v1-0-a85a8d0ace21@debian.org
====================

Link: https://patch.msgid.link/20250108-netcons_overflow_test-v3-0-3d85eb091bec@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

netconsole: selftest: verify userdata entry limit

Add a new selftest for netconsole that tests the userdata entry limit
functionality. The test performs two key verifications:

1. Create MAX_USERDATA_ITEMS (16) userdata entries successfully
2. Confirm that attempting to create an additional userdata entry fails

The selftest script uses the netcons library and checks the behavior
by attempting to create entries beyond the maximum allowed limit.

Signed-off-by: Breno Leitao <leitao@debian.org>
Tested-by: Simon Horman <horms@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250108-netcons_overflow_test-v3-4-3d85eb091bec@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

netconsole: selftest: Delete all userdata keys

Modify the cleanup function to remove all userdata keys created during the
test, instead of just deleting a single predefined key. This ensures a
more thorough cleanup of temporary resources.

Move the KEY_PATH variable definition inside the set_user_data function
to reduce global variables and improve encapsulation. The KEY_PATH
variable is now dynamically created when setting user data.

This change has no effect on the current test, while improving an
upcoming test that would create several userdata entries.

Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250108-netcons_overflow_test-v3-3-3d85eb091bec@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

netconsole: selftest: Split the helpers from the selftest

Split helper functions from the netconsole basic test into a separate
library file to enable reuse across different netconsole tests. This
change only moves the existing helper functions to lib/sh/lib_netcons.sh
while preserving the same test functionality.

The helpers provide common functions for:
- Setting up network namespaces and interfaces
- Managing netconsole dynamic targets
- Setting user data
- Handling test dependencies
- Cleanup operations

Do not make any change in the code, other than the mechanical
separation.

Signed-off-by: Breno Leitao <leitao@debian.org>
Tested-by: Simon Horman <horms@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250108-netcons_overflow_test-v3-2-3d85eb091bec@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

netconsole: Warn if MAX_USERDATA_ITEMS limit is exceeded

netconsole configfs helpers doesn't allow the creation of more than
MAX_USERDATA_ITEMS items.

Add a warning when netconsole userdata update function attempts sees
more than MAX_USERDATA_ITEMS entries.

Replace silent ignore mechanism with WARN_ON_ONCE() to highlight
potential misuse during development and debugging.

Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250108-netcons_overflow_test-v3-1-3d85eb091bec@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge git://git./linux/kernel/git/netdev/net

Cross-merge networking fixes after downstream PR (net-6.13-rc7).

Conflicts:
  a42d71e322a8 ("net_sched: sch_cake: Add drop reasons")
  737d4d91d35b ("sched: sch_cake: add bounds checks to host bulk flow fairness counts")

Adjacent changes:

drivers/net/ethernet/meta/fbnic/fbnic.h
  3a856ab34726 ("eth: fbnic: add IRQ reuse support")
  95978931d55f ("eth: fbnic: Revert "eth: fbnic: Add hardware monitoring support via HWMON interface"")

Signed-off-by: Jakub Kicinski <kuba@kernel.org>